def generate_domain():
#--------------------------------------------------------------------------
# Setup computational domain
#--------------------------------------------------------------------------
length = 10.
width = 5.
dx = dy = 1. # Resolution: Length of subdivisions on both axes
points, vertices, boundary = anuga.rectangular_cross(int(length / dx),
int(width / dy),
len1=length,
len2=width)
domain = anuga.Domain(points, vertices, boundary)
domain.set_name('channel2') # Output name
#--------------------------------------------------------------------------
# Setup initial conditions
#--------------------------------------------------------------------------
def topography(x, y):
return -x / 10 # linear bed slope
domain.set_quantity('elevation', topography) # Use function for elevation
domain.set_quantity('friction', 0.01) # Constant friction
domain.set_quantity('stage',
expression='elevation') # Dry initial condition
#--------------------------------------------------------------------------
# Setup boundary conditions
#--------------------------------------------------------------------------
Bi = anuga.Dirichlet_boundary([0.4, 0, 0]) # Inflow
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bo = anuga.Dirichlet_boundary([-5, 0, 0]) # Outflow
domain.set_boundary({'left': Bi, 'right': Br, 'top': Br, 'bottom': Br})
import sys
if len(sys.argv) > 1 and "gpu" in sys.argv:
domain.using_gpu = True
else:
domain.using_gpu = False
print sys.argv, "gpu" in sys.argv
return domain
def setup_boundaries(simulation):
"""
Setup boundary conditions
"""
domain = simulation.domain
Bd = anuga.Dirichlet_boundary([0, 0, 0])
Bw = anuga.Time_boundary(domain=domain, function=wrapped_file_function)
domain.set_boundary({'west': Bd, 'south': Bd, 'north': Bd, 'east': Bw})
def generate_channel1_domain(gpu=True):
#--------------------------------------------------------------------------
# Setup computational domain
#--------------------------------------------------------------------------
#points, vertices, boundary = anuga.rectangular_cross(10, 1,
# len1=10.0, len2=5.0) # Mesh
points, vertices, boundary = anuga.rectangular_cross(1,
4,
len1=0.1,
len2=0.1) # Mesh
if gpu:
domain = GPU_domain(points, vertices, boundary) # Create domain
for i in range(len(sys.argv)):
if sys.argv[i] == '-gpu':
domain.using_gpu = True
print " --> Enable GPU version"
elif sys.argv[i] == '-fs':
finaltime = float(sys.argv[i + 1])
print " --> Finaltime is reset as %f" % finaltime
elif sys.argv[i] == '-test':
domain.cotesting = True
print " --> Enable Cotesting"
elif sys.argv[i] == '-ustore':
domain.store = True
print " --> Disable storing"
else:
domain = anuga.Domain(points, vertices, boundary) # Create domain
domain.set_name('channel1') # Output name
#--------------------------------------------------------------------------
# Setup initial conditions
#--------------------------------------------------------------------------
def topography(x, y):
return -x / 10 # linear bed slope
domain.set_quantity('elevation', topography) # Use function for elevation
domain.set_quantity('friction', 0.01) # Constant friction
domain.set_quantity(
'stage', # Dry bed
expression='elevation')
#--------------------------------------------------------------------------
# Setup boundary conditions
#--------------------------------------------------------------------------
Bi = anuga.Dirichlet_boundary([0.4, 0, 0]) # Inflow
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
domain.set_boundary({'left': Bi, 'right': Br, 'top': Br, 'bottom': Br})
return domain
def test_boundary_conditions(self):
a = [0.0, 0.0]
b = [0.0, 2.0]
c = [2.0, 0.0]
d = [0.0, 4.0]
e = [2.0, 2.0]
f = [4.0, 0.0]
points = [a, b, c, d, e, f]
#bac, bce, ecf, dbe
vertices = [[1, 0, 2], [1, 2, 4], [4, 2, 5], [3, 1, 4]]
boundary = {
(0, 0): 'First',
(0, 2): 'First',
(2, 0): 'Second',
(2, 1): 'Second',
(3, 1): 'Second',
(3, 2): 'Second'
}
domain = Generic_Domain(points, vertices, boundary,
conserved_quantities =\
['stage', 'xmomentum', 'ymomentum'])
domain.check_integrity()
domain.set_quantity('stage',
[[1, 2, 3], [5, 5, 5], [0, 0, 9], [-6, 3, 3]])
domain.set_boundary({
'First': anuga.Dirichlet_boundary([5, 2, 1]),
'Second': anuga.Transmissive_boundary(domain)
})
domain.update_boundary()
assert domain.quantities['stage'].boundary_values[0] == 5. #Dirichlet
assert domain.quantities['stage'].boundary_values[1] == 5. #Dirichlet
assert domain.quantities['stage'].boundary_values[2] ==\
domain.get_conserved_quantities(2, edge=0)[0] #Transmissive (4.5)
assert domain.quantities['stage'].boundary_values[3] ==\
domain.get_conserved_quantities(2, edge=1)[0] #Transmissive (4.5)
assert domain.quantities['stage'].boundary_values[4] ==\
domain.get_conserved_quantities(3, edge=1)[0] #Transmissive (-1.5)
assert domain.quantities['stage'].boundary_values[5] ==\
domain.get_conserved_quantities(3, edge=2)[0] #Transmissive (-1.5)
#Check enumeration
for k, ((vol_id, edge_id), _) in enumerate(domain.boundary_objects):
assert domain.neighbours[vol_id, edge_id] == -k - 1
def create_sww_boundary(self, boundary_starttime):
"""
This creates a boundary file with ;
time stage
0 5
10 2.15268
20 13.9773
"""
tide = 5
boundary_filename = tempfile.mktemp(".sww")
dir, base = os.path.split(boundary_filename)
boundary_name = base[:-4]
# Setup computational domain
mesh = Mesh()
mesh.add_region_from_polygon([[0, 0], [100, 0], [100, 100], [0, 100]])
mesh.generate_mesh(verbose=False)
domain = pmesh_to_domain_instance(mesh, anuga.Domain)
domain.set_name(boundary_name)
domain.set_datadir(dir)
domain.set_starttime(boundary_starttime)
domain.set_low_froude(0)
# Setup initial conditions
domain.set_quantity('elevation', 0.0)
domain.set_quantity('stage', tide)
# Setup boundary conditions
Bd = anuga.Dirichlet_boundary([tide, 0.,
0.]) # Constant boundary values
Bd = anuga.Time_boundary(
domain=domain, # Time dependent boundary
function=lambda t: [t, 0.0, 0.0])
domain.set_boundary({'exterior': Bd})
for t in domain.evolve(yieldstep=10, finaltime=20.0):
pass
#print domain.boundary_statistics('stage')
q = Bd.evaluate()
# FIXME (Ole): This test would not have passed in
# changeset:5846.
msg = 'Time boundary not evaluated correctly'
assert num.allclose(t, q[0]), msg
#print domain.get_quantity('stage').get_values()
#domain.write_time()
#print "domain.time", domain.time
return boundary_filename
def setup_boundaries(simulation):
"""
Setup boundary conditions
"""
domain = simulation.domain
Bd = anuga.Dirichlet_boundary([0, 0, 0])
#Bw = anuga.Time_boundary(domain=domain, function=wrapped_file_function)
func = anuga.file_function(join('Forcing', 'Tide', 'Pioneer.tms'),
quantities='rainfall')
Bw = anuga.Time_boundary(domain=domain,
function=lambda t: [func(t), 0.0, 0.0])
domain.set_boundary({'west': Bd, 'south': Bd, 'north': Bd, 'east': Bw})
def test_boundary_indices(self):
from anuga.config import default_boundary_tag
a = [0.0, 0.5]
b = [0.0, 0.0]
c = [0.5, 0.5]
points = [a, b, c]
vertices = [[0, 1, 2]]
domain = Generic_Domain(points, vertices)
domain.set_boundary( \
{default_boundary_tag: anuga.Dirichlet_boundary([5,2,1])} )
domain.check_integrity()
assert num.allclose(domain.neighbours, [[-1, -2, -3]])
def create_domain(self, flowalg):
# Riverwall = list of lists, each with a set of x,y,z (and optional QFactor) values
# Make the domain
domain = anuga.create_domain_from_regions(
boundaryPolygon,
boundary_tags={
'left': [0],
'top': [1],
'right': [2],
'bottom': [3]
},
mesh_filename='test_boundaryfluxintegral.msh',
maximum_triangle_area=200.,
minimum_triangle_angle=28.0,
use_cache=False,
verbose=verbose)
# 05/05/2014 -- riverwalls only work with DE0 and DE1
domain.set_flow_algorithm(flowalg)
domain.set_name('test_boundaryfluxintegral')
domain.set_store_vertices_uniquely()
def topography(x, y):
return -x / 150.
# NOTE: Setting quantities at centroids is important for exactness of tests
domain.set_quantity('elevation', topography, location='centroids')
domain.set_quantity('friction', 0.03)
domain.set_quantity('stage', topography, location='centroids')
# Boundary conditions
Br = anuga.Reflective_boundary(domain)
Bd = anuga.Dirichlet_boundary([0., 0., 0.])
domain.set_boundary({'left': Br, 'right': Bd, 'top': Br, 'bottom': Br})
return domain
def test_conserved_evolved_boundary_conditions(self):
a = [0.0, 0.0]
b = [0.0, 2.0]
c = [2.0, 0.0]
d = [0.0, 4.0]
e = [2.0, 2.0]
f = [4.0, 0.0]
points = [a, b, c, d, e, f]
#bac, bce, ecf, dbe
vertices = [[1, 0, 2], [1, 2, 4], [4, 2, 5], [3, 1, 4]]
boundary = {
(0, 0): 'First',
(0, 2): 'First',
(2, 0): 'Second',
(2, 1): 'Second',
(3, 1): 'Second',
(3, 2): 'Second'
}
try:
domain = Generic_Domain(points, vertices, boundary,
conserved_quantities = ['stage', 'xmomentum', 'ymomentum'],
evolved_quantities =\
['stage', 'xmomentum', 'xvelocity', 'ymomentum', 'yvelocity'])
except:
pass
else:
msg = 'Should have caught the evolved quantities not being in order'
raise Exception(msg)
domain = Generic_Domain(points, vertices, boundary,
conserved_quantities = ['stage', 'xmomentum', 'ymomentum'],
evolved_quantities =\
['stage', 'xmomentum', 'ymomentum', 'xvelocity', 'yvelocity'])
domain.set_quantity('stage',
[[1, 2, 3], [5, 5, 5], [0, 0, 9], [6, -3, 3]])
domain.set_boundary({
'First': anuga.Dirichlet_boundary([5, 2, 1, 4, 6]),
'Second': anuga.Transmissive_boundary(domain)
})
# try:
# domain.update_boundary()
# except:
# pass
# else:
# msg = 'Should have caught the lack of conserved_values_to_evolved_values member function'
# raise Exception, msg
domain.update_boundary()
def conserved_values_to_evolved_values(q_cons, q_evol):
q_evol[0:3] = q_cons
q_evol[3] = old_div(q_cons[1], q_cons[0])
q_evol[4] = old_div(q_cons[2], q_cons[0])
return q_evol
domain.conserved_values_to_evolved_values = conserved_values_to_evolved_values
domain.update_boundary()
assert domain.quantities['stage'].boundary_values[0] == 5. #Dirichlet
assert domain.quantities['stage'].boundary_values[1] == 5. #Dirichlet
assert domain.quantities['xvelocity'].boundary_values[
0] == 4. #Dirichlet
assert domain.quantities['yvelocity'].boundary_values[
1] == 6. #Dirichlet
q_cons = domain.get_conserved_quantities(2, edge=0) #Transmissive
assert domain.quantities['stage'].boundary_values[2] == q_cons[0]
assert domain.quantities['xmomentum'].boundary_values[2] == q_cons[1]
assert domain.quantities['ymomentum'].boundary_values[2] == q_cons[2]
assert domain.quantities['xvelocity'].boundary_values[2] == old_div(
q_cons[1], q_cons[0])
assert domain.quantities['yvelocity'].boundary_values[2] == old_div(
q_cons[2], q_cons[0])
q_cons = domain.get_conserved_quantities(2, edge=1) #Transmissive
assert domain.quantities['stage'].boundary_values[3] == q_cons[0]
assert domain.quantities['xmomentum'].boundary_values[3] == q_cons[1]
assert domain.quantities['ymomentum'].boundary_values[3] == q_cons[2]
assert domain.quantities['xvelocity'].boundary_values[3] == old_div(
q_cons[1], q_cons[0])
assert domain.quantities['yvelocity'].boundary_values[3] == old_div(
q_cons[2], q_cons[0])
q_cons = domain.get_conserved_quantities(3, edge=1) #Transmissive
assert domain.quantities['stage'].boundary_values[4] == q_cons[0]
assert domain.quantities['xmomentum'].boundary_values[4] == q_cons[1]
assert domain.quantities['ymomentum'].boundary_values[4] == q_cons[2]
assert domain.quantities['xvelocity'].boundary_values[4] == old_div(
q_cons[1], q_cons[0])
assert domain.quantities['yvelocity'].boundary_values[4] == old_div(
q_cons[2], q_cons[0])
q_cons = domain.get_conserved_quantities(3, edge=2) #Transmissive
assert domain.quantities['stage'].boundary_values[5] == q_cons[0]
assert domain.quantities['xmomentum'].boundary_values[5] == q_cons[1]
assert domain.quantities['ymomentum'].boundary_values[5] == q_cons[2]
assert domain.quantities['xvelocity'].boundary_values[5] == old_div(
q_cons[1], q_cons[0])
assert domain.quantities['yvelocity'].boundary_values[5] == old_div(
q_cons[2], q_cons[0])
def generate_cairns_domain(gpu=False):
#-----------------------------------------------------------------------
# Preparation of topographic data
# Convert ASC 2 DEM 2 PTS using source data
# and store result in source data
#-----------------------------------------------------------------------
# Create DEM from asc data
anuga.asc2dem(project.name_stem + '.asc', use_cache=True, verbose=True)
# Create pts file for onshore DEM
anuga.dem2pts(project.name_stem + '.dem', use_cache=True, verbose=True)
#-----------------------------------------------------------------------
# Create the triangular mesh and domain based on
# overall clipping polygon with a tagged
# boundary and interior regions as defined in project.py
#-----------------------------------------------------------------------
domain = anuga.create_domain_from_regions(
project.bounding_polygon,
boundary_tags={
'top': [0],
'ocean_east': [1],
'bottom': [2],
'onshore': [3]
},
maximum_triangle_area=project.default_res,
mesh_filename=project.meshname,
interior_regions=project.interior_regions,
use_cache=True,
verbose=True)
if gpu:
#domain.__class__ = GPU_domain
domain = GPU_domain(domain=domain)
# Print some stats about mesh and domain
print 'Number of triangles = ', len(domain)
#print 'The extent is ', domain.get_extent()
#print domain.statistics()
#-----------------------------------------------------------------------
# Setup parameters of computational domain
#-----------------------------------------------------------------------
domain.set_name('cairns_' + project.scenario) # Name of sww file
domain.set_datadir('.') # Store sww output here
domain.set_minimum_storable_height(0.01) # Store only depth > 1cm
domain.set_flow_algorithm('tsunami')
#-----------------------------------------------------------------------
# Setup initial conditions
#-----------------------------------------------------------------------
tide = 0.0
domain.set_quantity('stage', tide)
domain.set_quantity('friction', 0.0)
domain.set_quantity('elevation',
filename=project.name_stem + '.pts',
use_cache=True,
verbose=True,
alpha=0.1)
#-----------------------------------------------------------------------
# Setup information for slide scenario
# (to be applied 1 min into simulation
#-----------------------------------------------------------------------
if project.scenario == 'slide':
# Function for submarine slide
tsunami_source = anuga.slide_tsunami(length=35000.0,
depth=project.slide_depth,
slope=6.0,
thickness=500.0,
x0=project.slide_origin[0],
y0=project.slide_origin[1],
alpha=0.0,
domain=domain,
verbose=True)
#-----------------------------------------------------------------------
# Setup boundary conditions
#-----------------------------------------------------------------------
print 'Available boundary tags', domain.get_boundary_tags()
Bd = anuga.Dirichlet_boundary([tide, 0, 0]) # Mean water level
Bs = anuga.Transmissive_stage_zero_momentum_boundary(domain)
# Neutral boundary
if project.scenario == 'fixed_wave':
# Huge 50m wave starting after 60 seconds and lasting 1 hour.
Bw = anuga.Transmissive_n_momentum_zero_t_momentum_set_stage_boundary(
domain=domain, function=lambda t: [(60 < t < 3660) * 50, 0, 0])
domain.set_boundary({
'ocean_east': Bw,
'bottom': Bs,
'onshore': Bd,
'top': Bs
})
if project.scenario == 'slide':
# Boundary conditions for slide scenario
domain.set_boundary({
'ocean_east': Bd,
'bottom': Bd,
'onshore': Bd,
'top': Bd
})
if gpu:
if '-gpu' in sys.argv:
domain.using_gpu = True
print " --> Enable GPU version"
return domain
number_of_barrels=1,
#update_interval=0.25,
log_file=True,
discharge_hydrograph=True,
use_velocity_head=False,
verbose=True)
domain.forcing_terms.append(culvert_energy)
"""
#------------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
print 'Setting Boundary Conditions'
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bi = anuga.Dirichlet_boundary([0.0, 0.0, 0.0]) # Inflow based on Flow Depth and Approaching Momentum !!!
Bo = anuga.Dirichlet_boundary([-5.0, 0, 0]) # Outflow water at -5.0
Bd = anuga.Dirichlet_boundary([0,0,0]) # Outflow water at 0.0
#Btus = Time_boundary(domain, lambda t: [0.0+ 1.025*(1+num.sin(2*pi*(t-4)/10)), 0.0, 0.0])
#Btds = Time_boundary(domain, lambda t: [0.0+ 0.0075*(1+num.sin(2*pi*(t-4)/20)), 0.0, 0.0])
Btus = anuga.Dirichlet_boundary([18.0, 0, 0]) # Outflow water at 5.0
Btds = anuga.Dirichlet_boundary([0.0, 0, 0]) # Outflow water at 1.0
domain.set_boundary({'left': Btus, 'right': Btds, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Evolve system through time
#------------------------------------------------------------------------------
z = zeros(len(x), float)
for i in range(len(x)):
if x[i]<=0.0:
z[i] = h0
else:
z[i] = h1
return z
domain.set_quantity('stage', height)
#-----------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
from math import sin, pi, exp
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bt = anuga.Transmissive_boundary(domain) # Continue all values on boundary
Bd = anuga.Dirichlet_boundary([1,0.,0.]) # Constant boundary values
# Associate boundary tags with boundary objects
domain.set_boundary({'left': Bt, 'right': Bt, 'top': Br, 'bottom': Br})
#===============================================================================
vtk_visualiser = True
if vtk_visualiser:
from anuga.visualiser import RealtimeVisualiser
vis = RealtimeVisualiser(domain)
vis.render_quantity_height("height",dynamic=True)
#vis.render_quantity_height("stage", zScale =1.0, dynamic=True)
vis.colour_height_quantity('stage', (0.0, 0.0, 1.0))
vis.start()
#===============================================================================
else:
domain = None
#------------------------
# Create parallel domain
#------------------------
domain = distribute(domain)
#--------------------------
# Setup boundary conditions
#--------------------------
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bt = anuga.Transmissive_boundary(
domain) # Continue all values of boundary -- not used in this example
Bd = anuga.Dirichlet_boundary(
[-0.1 * scale_me, 0.,
0.]) # Constant boundary values -- not used in this example
#----------------------------------------------
# Associate boundary tags with boundary objects
#----------------------------------------------
domain.set_boundary({'left': Br, 'right': Bd, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
parameter_file = open('parameters.tex', 'w')
parameter_file.write('\\begin{verbatim}\n')
from pprint import pprint
pprint(domain.get_algorithm_parameters(), parameter_file, indent=4)
#end_point1=[50.0, 62.5],
#losses,
#width=25.0,
#depth=10.0,
#apron=5.0,
#manning=0.013,
#verbose=False)
#------------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
print 'Setting Boundary Conditions'
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bi = anuga.Dirichlet_boundary([0.0, 0.0, 0.0]) # Inflow based on Flow Depth and Approaching Momentum !!!
Btus = anuga.Dirichlet_boundary([20.0, 0, 0]) # Outflow water at 10.0
Btds = anuga.Dirichlet_boundary([19.0, 0, 0]) # Outflow water at 9.0
domain.set_boundary({'left': Btus, 'right': Btds, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Evolve system through time
#------------------------------------------------------------------------------
for t in domain.evolve(yieldstep = 1, finaltime = 100):
print domain.timestepping_statistics()
domain.print_operator_timestepping_statistics()
def test_that_culvert_runs_rating(self):
"""test_that_culvert_runs_rating
This test exercises the culvert and checks values outside rating curve
are dealt with
"""
path = get_pathname_from_package('anuga.culvert_flows')
path = os.path.join(path, 'tests', 'data')
length = 40.
width = 5.
dx = dy = 1 # Resolution: Length of subdivisions on both axes
points, vertices, boundary = rectangular_cross(int(length / dx),
int(width / dy),
len1=length,
len2=width)
domain = anuga.Domain(points, vertices, boundary)
domain.set_name('Test_culvert') # Output name
domain.set_default_order(2)
#----------------------------------------------------------------------
# Setup initial conditions
#----------------------------------------------------------------------
def topography(x, y):
"""Set up a weir
A culvert will connect either side
"""
# General Slope of Topography
z = -x / 1000
N = len(x)
for i in range(N):
# Sloping Embankment Across Channel
if 5.0 < x[i] < 10.1:
# Cut Out Segment for Culvert face
if 1.0 + (x[i] - 5.0) / 5.0 < y[i] < 4.0 - (x[i] -
5.0) / 5.0:
z[i] = z[i]
else:
z[i] += 0.5 * (x[i] - 5.0) # Sloping Segment U/S Face
if 10.0 < x[i] < 12.1:
z[i] += 2.5 # Flat Crest of Embankment
if 12.0 < x[i] < 14.5:
# Cut Out Segment for Culvert face
if 2.0 - (x[i] - 12.0) / 2.5 < y[i] < 3.0 + (x[i] -
12.0) / 2.5:
z[i] = z[i]
else:
z[i] += 2.5 - 1.0 * (x[i] - 12.0) # Sloping D/S Face
return z
domain.set_quantity('elevation', topography)
domain.set_quantity('friction', 0.01) # Constant friction
domain.set_quantity('stage',
expression='elevation') # Dry initial condition
filename = os.path.join(path, 'example_rating_curve.csv')
culvert = Culvert_flow(domain,
culvert_description_filename=filename,
end_point0=[9.0, 2.5],
end_point1=[13.0, 2.5],
width=1.00,
use_velocity_head=True,
verbose=False)
domain.forcing_terms.append(culvert)
#-----------------------------------------------------------------------
# Setup boundary conditions
#-----------------------------------------------------------------------
# Inflow based on Flow Depth and Approaching Momentum
Bi = anuga.Dirichlet_boundary([0.0, 0.0, 0.0])
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bo = anuga.Dirichlet_boundary([-5, 0, 0]) # Outflow
# Upstream and downstream conditions that will exceed the rating curve
# I.e produce delta_h outside the range [0, 10] specified in the the
# file example_rating_curve.csv
Btus = anuga.Time_boundary(
domain, lambda t: [100 * num.sin(2 * pi * (t - 4) / 10), 0.0, 0.0])
Btds = anuga.Time_boundary(
domain,
lambda t: [-5 * (num.cos(2 * pi * (t - 4) / 20)), 0.0, 0.0])
domain.set_boundary({
'left': Btus,
'right': Btds,
'top': Br,
'bottom': Br
})
#-----------------------------------------------------------------------
# Evolve system through time
#-----------------------------------------------------------------------
min_delta_w = sys.maxint
max_delta_w = -min_delta_w
for t in domain.evolve(yieldstep=1, finaltime=25):
delta_w = culvert.inlet.stage - culvert.outlet.stage
if delta_w > max_delta_w: max_delta_w = delta_w
if delta_w < min_delta_w: min_delta_w = delta_w
pass
# Check that extreme values in rating curve have been exceeded
# so that we know that condition has been exercised
assert min_delta_w < 0
assert max_delta_w > 10
os.remove('Test_culvert.sww')
return 2.0*ones(len(x))
domain.set_quantity('stage', height)
else:
domain = None
#---------------------------
# Create Parallel Domain
#---------------------------
domain = distribute(domain)
#-----------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
#Bt = anuga.Transmissive_boundary(domain) # Continue all values on boundary
Bd = anuga.Dirichlet_boundary([0.5, 10.0, 0.]) # Constant boundary values
# Associate boundary tags with boundary objects
domain.set_boundary({'left': Bd, 'right': Bd, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
parameter_file=open('parameters.tex', 'w')
parameter_file.write('\\begin{verbatim}\n')
from pprint import pprint
pprint(domain.get_algorithm_parameters(),parameter_file,indent=4)
domain.set_quantity('stage', 0)
domain.set_quantity('elevation',
filename=basename + '.csv',
use_cache=False,
verbose=True,
alpha=0.99)
#------------------------------------------------------------------------------
# SETUP BOUNDARY CONDITIONS
#------------------------------------------------------------------------------
print('Available boundary tags', domain.get_boundary_tags())
Br = anuga.Reflective_boundary(domain)
Bd = anuga.Dirichlet_boundary([0, 0, 0])
#Bt = anuga.Flather_external_stage_zero_velocity_boundary()
domain.set_boundary({'inflow': Br, 'bottom': Br, 'outflow': Bd, 'top': Br})
#domain.set_boundary({'exterior' : Bd})
# ------------------------------------------------------------------------------
# Setup inject water
# ------------------------------------------------------------------------------
input_rate = 0.05 # 0.102 # i made inflow exactly the same as in DRAINS example
input1_anuga_region = Region(domain,
radius=1.0,
center=(305694.91, 6188013.94))
input1_anuga_inlet_op = Inlet_operator(domain,
input1_anuga_region,
Q=input_rate)
domain.set_quantity('elevation',0.0) # Use function for elevation
domain.set_quantity('friction',0.0) # Constant friction
domain.set_quantity('stage',1.) # Constant negative initial stage
else:
domain = None
#--------------------------
# Create Parallel Domain
#--------------------------
domain = distribute(domain)
#--------------------------
# Setup boundary conditions
#--------------------------
Br=anuga.Reflective_boundary(domain) # Solid reflective wall
Bd=anuga.Dirichlet_boundary([1., 1., 0.]) # Constant boundary values -- not used in this example
#----------------------------------------------
# Associate boundary tags with boundary objects
#----------------------------------------------
domain.set_boundary({'left': Br, 'right': Br, 'top': Bd, 'bottom':Br})
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
parameter_file=open('parameters.tex', 'w')
parameter_file.write('\\begin{verbatim}\n')
from pprint import pprint
pprint(domain.get_algorithm_parameters(),parameter_file,indent=4)
else:
domain = None
#============================================================================
# Create Parallel Domain
#============================================================================
domain = distribute(domain)
#---------
# Boundary
#R = anuga.Reflective_boundary(domain)
#T = anuga.Transmissive_boundary(domain)
D = anuga.Dirichlet_boundary([0.0, 0.0, 0.0])
domain.set_boundary({'left': D, 'right': D, 'top': D, 'bottom': D})
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
parameter_file=open('parameters.tex', 'w')
parameter_file.write('\\begin{verbatim}\n')
from pprint import pprint
pprint(domain.get_algorithm_parameters(),parameter_file,indent=4)
parameter_file.write('\\end{verbatim}\n')
parameter_file.close()
import time
domain.set_quantity('ymomentum', 0.0)
else:
domain = None
#---------------------------
# Create Parallel Domain
#---------------------------
domain = distribute(domain)
#-----------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
#Bt = anuga.Transmissive_boundary(domain) # Continue all values on boundary
Bd = anuga.Dirichlet_boundary([2., 4.42, 0.]) # Constant boundary values
# Associate boundary tags with boundary objects
domain.set_boundary({'left': Bd, 'right': Bd, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
parameter_file=open('parameters.tex', 'w')
parameter_file.write('\\begin{verbatim}\n')
from pprint import pprint
pprint(domain.get_algorithm_parameters(),parameter_file,indent=4)
use_velocity_head=False,
smoothing_timescale=30.0,
logging=verbose)
#------------------------------------------------------------------------------
#
# Setup boundary conditions
#
#------------------------------------------------------------------------------
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bt = anuga.Transmissive_boundary(domain) # Transmissive boundary
Bout_sub = anuga.Dirichlet_boundary( \
[-floodplain_length*floodplain_slope - chan_bankfull_depth + \
chan_initial_depth, 0., 0.]) #An outflow boundary for subcritical steady flow
def outflow_stage_boundary(t):
return -floodplain_length*floodplain_slope \
+ chan_initial_depth - chan_bankfull_depth
Bout_tmss = anuga.shallow_water.boundaries.Transmissive_momentum_set_stage_boundary(
domain, function=outflow_stage_boundary)
domain.set_boundary({
'left': Br,
'right': Br,
'top1': Bout_tmss,
domain.set_quantity('stage', stage)
else:
domain = None
#-----------------------------------------------------------------------------
# create Parallel Domain
#------------------------------------------------------------------------------
domain = distribute(domain)
#-----------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
from math import sin, pi, exp
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bt = anuga.Transmissive_boundary(domain) # Continue all values on boundary
BdL = anuga.Dirichlet_boundary([1.0144468506259066, 1.53,
0.]) # Constant boundary values
BdR = anuga.Dirichlet_boundary([0.4057809296474606, 1.53,
0.]) # Constant boundary values
# Associate boundary tags with boundary objects
domain.set_boundary({'left': BdL, 'right': BdR, 'top': Br, 'bottom': Br})
# w_uh_vhL= [1.0144468506259066, 1.53, 0.]
# w_uh_vhR= [0.4057809296474606, 1.53, 0.]
# Polygonal_set_w_uh_vh_operator(domain,w_uh_vhL,BC_polygonL)
# Polygonal_set_w_uh_vh_operator(domain,w_uh_vhR,BC_polygonR)
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
tsunami_source = anuga.slide_tsunami(length=35000.0,
depth=project.slide_depth,
slope=6.0,
thickness=500.0,
x0=project.slide_origin[0],
y0=project.slide_origin[1],
alpha=0.0,
domain=domain,
verbose=project.verbose)
#------------------------------------------------------------------------------
# Setup boundary condition
#------------------------------------------------------------------------------
print 'Available boundary tags', domain.get_boundary_tags()
Bd = anuga.Dirichlet_boundary([tide, 0, 0]) # Mean water level
Bs = anuga.Transmissive_stage_zero_momentum_boundary(
domain) # Neutral boundary
if project.scenario == 'fixed_wave':
# Huge 10.94m wave starting after 60 seconds and lasting 60 minutes.
Bw = anuga.Transmissive_n_momentum_zero_t_momentum_set_stage_boundary(
domain=domain, function=lambda t: [(60 < t < 3660) * 10.94, 0, 0])
Bt = anuga.Time_boundary(domain=domain,
function=lambda t: [(60 < t < 3660) * 11, 0, 0],
default_boundary=None,
verbose=False)
domain.set_boundary({
'bottom_ocean': Bd,
#apron=5.0,
#use_momentum_jet=True,
#use_velocity_head=False,
#logging=True,
#manning=0.013,
#verbose=False)
line = [[0.0, 5.0], [0.0, 10.0]]
Q = 5.0
Inlet_operator(domain, line, Q)
##-----------------------------------------------------------------------
## Setup boundary conditions
##-----------------------------------------------------------------------
## Inflow based on Flow Depth and Approaching Momentum
Bi = anuga.Dirichlet_boundary([2.0, 0.0, 0.0])
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
#Bo = anuga.Dirichlet_boundary([-5, 0, 0]) # Outflow
## Upstream and downstream conditions that will exceed the rating curve
## I.e produce delta_h outside the range [0, 10] specified in the the
## file example_rating_curve.csv
#Btus = anuga.Time_boundary(domain, \
#lambda t: [100*num.sin(2*pi*(t-4)/10), 0.0, 0.0])
#Btds = anuga.Time_boundary(domain, \
#lambda t: [-5*(num.cos(2*pi*(t-4)/20)), 0.0, 0.0])
#domain.set_boundary({'left': Btus, 'right': Btds, 'top': Br, 'bottom': Br})
domain.set_boundary({'left': Br, 'right': Br, 'top': Br, 'bottom': Br})
##-----------------------------------------------------------------------
## Evolve system through time
domain.set_quantity('stage', stage)
else:
domain = None
#-----------------------------------------------------------------------------
# Create Parallel Domain
#------------------------------------------------------------------------------
domain = distribute(domain)
#-----------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
from math import sin, pi, exp
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bt = anuga.Transmissive_boundary(domain) # Continue all values on boundary
BdL = anuga.Dirichlet_boundary([0.41373588752426715, 0.18,
0.]) # Constant boundary values
BdR = anuga.Dirichlet_boundary([0.33, 0.18, 0.]) # Constant boundary values
# Associate boundary tags with boundary objects
domain.set_boundary({'left': BdL, 'right': BdR, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Produce a documentation of parameters
#------------------------------------------------------------------------------
if myid == 0:
parameter_file = open('parameters.tex', 'w')
parameter_file.write('\\begin{verbatim}\n')
from pprint import pprint
pprint(domain.get_algorithm_parameters(), parameter_file, indent=4)
parameter_file.write('\\end{verbatim}\n')
parameter_file.close()
def run_simulation(parallel=False,
control_data=None,
test_points=None,
verbose=False):
success = True
##-----------------------------------------------------------------------
## Setup domain
##-----------------------------------------------------------------------
points, vertices, boundary = rectangular_cross(int(old_div(length, dx)),
int(old_div(width, dy)),
len1=length,
len2=width)
domain = anuga.Domain(points, vertices, boundary)
#domain.set_name() # Output name
domain.set_store(False)
domain.set_default_order(2)
##-----------------------------------------------------------------------
## Distribute domain
##-----------------------------------------------------------------------
if parallel:
domain = distribute(domain)
#domain.dump_triangulation("frac_op_domain.png")
##-----------------------------------------------------------------------
## Setup boundary conditions
##-----------------------------------------------------------------------
domain.set_quantity('elevation', topography)
domain.set_quantity('friction', 0.01) # Constant friction
domain.set_quantity('stage',
expression='elevation') # Dry initial condition
Bi = anuga.Dirichlet_boundary([5.0, 0.0, 0.0])
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
domain.set_boundary({'left': Br, 'right': Br, 'top': Br, 'bottom': Br})
##-----------------------------------------------------------------------
## Determine triangle index coinciding with test points
##-----------------------------------------------------------------------
assert (test_points is not None)
assert (len(test_points) == samples)
tri_ids = []
for point in test_points:
try:
k = domain.get_triangle_containing_point(point)
if domain.tri_full_flag[k] == 1:
tri_ids.append(k)
else:
tri_ids.append(-1)
except:
tri_ids.append(-2)
if verbose: print('P%d has points = %s' % (myid, tri_ids))
if not parallel: control_data = []
################ Define Fractional Operators ##########################
inlet0 = None
inlet1 = None
boyd_box0 = None
inlet0 = Inlet_operator(domain, line0, Q0, verbose=False, label='Inlet_0')
inlet1 = Inlet_operator(domain, line1, Q1, verbose=False, label='Inlet_1')
# Enquiry point [ 19. 2.5] is contained in two domains in 4 proc case
boyd_box0 = Boyd_box_operator(domain,
end_points=[[9.0, 2.5], [19.0, 2.5]],
losses=1.5,
width=5.0,
apron=5.0,
use_momentum_jet=True,
use_velocity_head=False,
manning=0.013,
label='Boyd_Box_0',
verbose=False)
#if inlet0 is not None and verbose: inlet0.print_statistics()
#if inlet1 is not None and verbose: inlet1.print_statistics()
if boyd_box0 is not None and verbose:
print("++++", myid)
boyd_box0.print_statistics()
# if parallel:
# factory = Parallel_operator_factory(domain, verbose = True)
#
# inlet0 = factory.inlet_operator_factory(line0, Q0)
# inlet1 = factory.inlet_operator_factory(line1, Q1)
#
# boyd_box0 = factory.boyd_box_operator_factory(end_points=[[9.0, 2.5],[19.0, 2.5]],
# losses=1.5,
# width=1.5,
# apron=5.0,
# use_momentum_jet=True,
# use_velocity_head=False,
# manning=0.013,
# verbose=False)
#
# else:
# inlet0 = Inlet_operator(domain, line0, Q0)
# inlet1 = Inlet_operator(domain, line1, Q1)
#
# # Enquiry point [ 19. 2.5] is contained in two domains in 4 proc case
# boyd_box0 = Boyd_box_operator(domain,
# end_points=[[9.0, 2.5],[19.0, 2.5]],
# losses=1.5,
# width=1.5,
# apron=5.0,
# use_momentum_jet=True,
# use_velocity_head=False,
# manning=0.013,
# verbose=False)
#######################################################################
##-----------------------------------------------------------------------
## Evolve system through time
##-----------------------------------------------------------------------
for t in domain.evolve(yieldstep=2.0, finaltime=20.0):
if myid == 0 and verbose:
domain.write_time()
#print domain.volumetric_balance_statistics()
stage = domain.get_quantity('stage')
if boyd_box0 is not None and verbose:
if myid == boyd_box0.master_proc:
print('master_proc ', myid)
boyd_box0.print_timestepping_statistics()
#for i in range(samples):
# if tri_ids[i] >= 0:
# if verbose: print 'P%d tri %d, value = %s' %(myid, i, stage.centroid_values[tri_ids[i]])
sys.stdout.flush()
pass
domain.sww_merge(delete_old=True)
success = True
##-----------------------------------------------------------------------
## Assign/Test Control data
##-----------------------------------------------------------------------
if not parallel:
stage = domain.get_quantity('stage')
for i in range(samples):
assert (tri_ids[i] >= 0)
control_data.append(stage.centroid_values[tri_ids[i]])
if inlet0 is not None:
control_data.append(inlet0.inlet.get_average_stage())
control_data.append(inlet0.inlet.get_average_xmom())
control_data.append(inlet0.inlet.get_average_ymom())
control_data.append(inlet0.inlet.get_total_water_volume())
control_data.append(inlet0.inlet.get_average_depth())
if verbose: print('P%d control_data = %s' % (myid, control_data))
else:
stage = domain.get_quantity('stage')
for i in range(samples):
if tri_ids[i] >= 0:
local_success = num.allclose(control_data[i],
stage.centroid_values[tri_ids[i]])
success = success and local_success
if verbose:
print(
'P%d tri %d, control = %s, actual = %s, Success = %s' %
(myid, i, control_data[i],
stage.centroid_values[tri_ids[i]], local_success))
if inlet0 is not None:
inlet_master_proc = inlet0.inlet.get_master_proc()
average_stage = inlet0.inlet.get_global_average_stage()
average_xmom = inlet0.inlet.get_global_average_xmom()
average_ymom = inlet0.inlet.get_global_average_ymom()
average_volume = inlet0.inlet.get_global_total_water_volume()
average_depth = inlet0.inlet.get_global_average_depth()
if myid == inlet_master_proc:
if verbose:
print('P%d average stage, control = %s, actual = %s' %
(myid, control_data[samples], average_stage))
print('P%d average xmom, control = %s, actual = %s' %
(myid, control_data[samples + 1], average_xmom))
print('P%d average ymom, control = %s, actual = %s' %
(myid, control_data[samples + 2], average_ymom))
print('P%d average volume, control = %s, actual = %s' %
(myid, control_data[samples + 3], average_volume))
print('P%d average depth, control = %s, actual = %s' %
(myid, control_data[samples + 4], average_depth))
return control_data, success
def test_runup_sinusoid(self):
""" Run a version of the validation test runup_sinusoid
to ensure limiting solution has small velocity
"""
points, vertices, boundary = anuga.rectangular_cross(20,20, len1=1., len2=1.)
domain=Domain(points,vertices,boundary) # Create Domain
domain.set_flow_algorithm('DE0')
domain.set_name('runup_sinusoid_v2') # Output to file runup.sww
domain.set_datadir('.') # Use current folder
domain.set_quantities_to_be_stored({'stage': 2, 'xmomentum': 2, 'ymomentum': 2, 'elevation': 1})
#domain.set_store_vertices_uniquely(True)
#------------------
# Define topography
#------------------
scale_me=1.0
def topography(x,y):
return (-x/2.0 +0.05*num.sin((x+y)*50.0))*scale_me
def stagefun(x,y):
stge=-0.2*scale_me #+0.01*(x>0.9)
return stge
domain.set_quantity('elevation',topography) # Use function for elevation
domain.get_quantity('elevation').smooth_vertex_values()
domain.set_quantity('friction',0.03) # Constant friction
domain.set_quantity('stage', stagefun) # Constant negative initial stage
domain.get_quantity('stage').smooth_vertex_values()
#--------------------------
# Setup boundary conditions
#--------------------------
Br=anuga.Reflective_boundary(domain) # Solid reflective wall
Bd=anuga.Dirichlet_boundary([-0.1*scale_me,0.,0.]) # Constant boundary values -- not used in this example
#----------------------------------------------
# Associate boundary tags with boundary objects
#----------------------------------------------
domain.set_boundary({'left': Br, 'right': Bd, 'top': Br, 'bottom':Br})
#------------------------------
#Evolve the system through time
#------------------------------
for t in domain.evolve(yieldstep=7.0,finaltime=7.0):
#print domain.timestepping_statistics()
xx = domain.quantities['xmomentum'].centroid_values
yy = domain.quantities['ymomentum'].centroid_values
dd = domain.quantities['stage'].centroid_values - domain.quantities['elevation'].centroid_values
#dd_raw=1.0*dd
dd = (dd)*(dd>1.0e-03)+1.0e-03
vv = ( (xx/dd)**2 + (yy/dd)**2)**0.5
vv = vv*(dd>1.0e-03)
#print 'Peak velocity is: ', vv.max(), vv.argmax()
#print 'Volume is', sum(dd_raw*domain.areas)
#print vv.max()
assert num.all(vv<1.01e-01)
#------------------------------------------------------------------------------
# Setup initial conditions
#------------------------------------------------------------------------------
def topography(x,y):
return -x/15 # gentle linear bed slope
domain.set_quantity('elevation', topography) # Use function for elevation
domain.set_quantity('friction', 0.03) # Constant friction
domain.set_quantity('stage',
expression='elevation') # Dry initial condition
#------------------------------------------------------------------------------
# Setup boundary conditions
#------------------------------------------------------------------------------
Bi = anuga.Dirichlet_boundary([1.0, 0, 0]) # Inflow
Br = anuga.Reflective_boundary(domain) # Solid reflective wall
Bo = anuga.Dirichlet_boundary([-5, 0, 0]) # Outflow
print domain.get_boundary_tags()
domain.set_boundary({'left': Bi, 'right': Bo, 'top': Br, 'bottom': Br,
'interior': Br ,# default interior boundary tag
'downstream': Br ,# downstream building
'upstream' : Br # upstream building boundary
})
#------------------------------------------------------------------------------
# Evolve system through time
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
domain = distribute(domain)
domain.set_store_vertices_uniquely(True)
domain.set_quantities_to_be_stored({
'elevation': 2,
'stage': 2,
'xmomentum': 2,
'ymomentum': 2
})
#------------------------------------------------------------------------------
# Setup boundary conditions on the distributed domain
#------------------------------------------------------------------------------
Bi = anuga.Dirichlet_boundary([1.2, 0, 0]) # Inflow at depth
Br = anuga.Reflective_boundary(domain) # Solid reflective side walls
Bo = anuga.Dirichlet_boundary([-5, 0, 0]) # uncontrolled outflow
domain.set_boundary({'left': Bi, 'right': Bo, 'top': Br, 'bottom': Br})
#------------------------------------------------------------------------------
# Setup sanddune erosion operator
#------------------------------------------------------------------------------
if myid == 0:
print '>>>>> Setting up Erosion Area(s) to test...'
# power up the erosion operator
from anuga import Sanddune_erosion_operator
#Initiate Vegetation operator
op1 = Vegetation_operator(domain, use_diffusivity=False)
#Read in vegetation rasters
VegCreate('Veg_D', 'veg_diameter')
VegCreate('Veg_S', 'veg_spacing')
# Set Quantities
op1.set_veg_quantity('Veg_S',
quantity_name='veg_spacing',
convert_file=False,
save_file=False,
load_interp=True)
op1.set_veg_quantity('Veg_D',
quantity_name='veg_diameter',
convert_file=False,
save_file=False,
load_interp=True)
# Define and set boundaries
# Define transmissive boundary for downstream outlet
Bt = anuga.Transmissive_boundary(domain) # Continue all values on boundary
#Define reflective boundary for channel edges
Br = anuga.Reflective_boundary(domain)
# Define Dirichlet boundary for upstream inlet flow
Bi = anuga.Dirichlet_boundary([inlet_elev + inlet_stage, 0, 0])
domain.set_boundary({'inlet': Bi, 'exterior': Br, 'outlet': Bt})
for t in domain.evolve(yieldstep=t_to_print, finaltime=duration):
print domain.timestepping_statistics()
