class VerifyStatusUI(PeachyFrame):
def initialize(self):
self.grid()
self._elapsed_time = StringVar()
self._current_layer = IntVar()
self._current_height = StringVar()
self._current_model_height = StringVar()
self._errors = IntVar()
self._status = StringVar()
self._stop_button_text = StringVar()
self._stop_button_text.set("Abort Verification")
self._current_status = {}
self._print_api = PrintAPI(self.kwargs['config'],status_call_back = self.status_call_back)
if 'filename' in self.kwargs:
file_to_print = self.kwargs['filename']
self._print_api.verify_gcode(file_to_print)
else:
self._print_api.verify_gcode(self.kwargs['layer_generator'])
Label(self, text = "Verifying Model" ).grid(column=0,row=5)
Label(self ).grid(column=0,row=8)
Label(self, text = "Elapsed Time" ).grid(column=0,row=10)
Label(self, textvariable = self._elapsed_time ).grid(column=1,row=10)
Label(self, text = "Layer" ).grid(column=0,row=20)
Label(self, textvariable = self._current_layer ).grid(column=1,row=20)
Label(self, text = "Model Height (mm)" ).grid(column=0,row=35)
Label(self, textvariable = self._current_model_height ).grid(column=1,row=35)
Label(self, text = "Status").grid(column=0,row=60)
Label(self, textvariable = self._status).grid(column=1,row=60)
Label(self, text = "Errors" ).grid(column=0,row=70)
Label(self, textvariable = self._errors ).grid(column=1,row=70)
Label(self).grid(column=0,row=70)
Button(self,textvariable=self._stop_button_text, command=self._stop_button_click).grid(column=2,row=80)
Button(self,text="Show Errors", command=self._show_errors).grid(column=3,row=80)
self.update()
def _stop_button_click(self):
self._print_api.stop()
self.navigate(self.kwargs['calling_class'], printer = self.kwargs['printer'])
def _show_errors(self):
PopUp(self,'Errors', '\n'.join([ "SubLayer %s : %s" % (err['layer'], err['message']) for err in self._current_status['errors'] ]))
def status_call_back(self,status):
total_seconds = int(status['elapsed_time'].total_seconds())
hours, remainder = divmod(total_seconds,60*60)
minutes, seconds = divmod(remainder,60)
self._elapsed_time.set("%02d:%02d:%02d" % (hours,minutes,seconds))
self._current_layer.set(status['current_layer'])
self._current_model_height.set("%.2f" % status['model_height'])
self._errors.set(len(status['errors']))
self._current_status = status
self._status.set(status['status'])
if (status['status'] == "Complete"):
self._stop_button_text.set("Finished")
def close(self):
self._print_api.stop()
def test_print_can_be_stopped_before_started(self):
api = PrintAPI(self.default_config)
api.stop()
class PrintStatusUI(PeachyFrame):
def initialize(self):
self.grid()
self._print_api = None
self._elapsed_time = StringVar()
self._current_layer = IntVar()
self._current_height = StringVar()
self._current_model_height = StringVar()
self._current_drips = IntVar()
self._waiting_for_drips = StringVar()
self._skipped_layers = IntVar()
self._status = StringVar()
self._stop_button_text = StringVar()
self._stop_button_text.set("Abort Print")
self._drips_per_second_setting = DoubleVar()
Label(self, text = "Elapsed Time" ).grid(column=0,row=10)
Label(self, textvariable = self._elapsed_time ).grid(column=1,row=10)
Label(self, text = "Layer" ).grid(column=0,row=20)
Label(self, textvariable = self._current_layer ).grid(column=1,row=20)
Label(self, text = "Actual Height (mm)" ).grid(column=0,row=30)
Label(self, textvariable = self._current_height ).grid(column=1,row=30)
Label(self, text = "Model Height (mm)" ).grid(column=0,row=35)
Label(self, textvariable = self._current_model_height ).grid(column=1,row=35)
Label(self, text = "Drips" ).grid(column=0,row=40)
Label(self, textvariable = self._current_drips ).grid(column=1,row=40)
Label(self, text = "Waiting for drips" ).grid(column=0,row=50)
Label(self, textvariable = self._waiting_for_drips ).grid(column=1,row=50)
Label(self, text = "Skipped Layers" ).grid(column=0,row=55)
Label(self, textvariable = self._skipped_layers ).grid(column=1,row=55)
Label(self, text = "Status").grid(column=0,row=60)
Label(self, textvariable = self._status).grid(column=1,row=60)
self.options_frame = LabelFrame(self, text="In Print Options", padx=5, pady=5)
self.options_frame.grid(column=12,row=10,rowspan = 60,sticky=N+S+E+W)
self.options_frame.grid_remove()
Label(self.options_frame, text = 'Drips Per Second').grid(column=0,row=10)
RylanSpinbox(self.options_frame, from_=0.0, to=100.0, increment= 0.1, command = self._dps_changed, textvariable = self._drips_per_second_setting).grid(column=1,row=10)
Label(self).grid(column=0,row=70)
Button(self,textvariable=self._stop_button_text, command=self._stop_button_click).grid(column=2,row=80)
self._print_api = PrintAPI(self.kwargs['config'],status_call_back = self.status_call_back)
if 'filename' in self.kwargs:
file_to_print = self.kwargs['filename']
self._print_api.print_gcode(file_to_print)
else:
self._print_api.print_layers(self.kwargs['layer_generator'])
if self._print_api.can_set_drips_per_second():
self.options_frame.grid()
self._drips_per_second_setting.set(self._print_api.get_drips_per_second())
self.update()
def _stop_button_click(self):
self._print_api.stop()
self.navigate(self.kwargs['calling_class'], printer = self.kwargs['printer'])
def status_call_back(self,status):
total_seconds = int(status['elapsed_time'].total_seconds())
hours, remainder = divmod(total_seconds,60*60)
minutes, seconds = divmod(remainder,60)
self._elapsed_time.set("%02d:%02d:%02d" % (hours,minutes,seconds))
self._current_layer.set(status['current_layer'])
self._current_height.set("%.2f" % status['height'])
self._current_model_height.set("%.2f" % status['model_height'])
self._current_drips.set(status['drips'])
self._waiting_for_drips.set("Yes" if status['waiting_for_drips'] else "No")
self._skipped_layers.set(status['skipped_layers'])
self._status.set(status['status'])
if (status['status'] == "Complete"):
self._stop_button_text.set("Finished")
def _dps_changed(self):
self._print_api.set_drips_per_second(self._drips_per_second_setting.get())
def close(self):
if self._print_api:
self._print_api.stop()
class PrintStatusUI(PeachyFrame):
def initialize(self):
self.grid()
self._elapsed_time = StringVar()
self._current_layer = IntVar()
self._current_height = StringVar()
self._current_model_height = StringVar()
self._current_drips = IntVar()
self._waiting_for_drips = StringVar()
self._skipped_layers = IntVar()
self._status = StringVar()
self._stop_button_text = StringVar()
self._stop_button_text.set("Abort Print")
self._print_api = PrintAPI(self.kwargs['config'],status_call_back = self.status_call_back)
if 'filename' in self.kwargs:
file_to_print = self.kwargs['filename']
self._print_api.print_gcode(file_to_print)
else:
self._print_api.print_layers(self.kwargs['layer_generator'])
Label(self, text = "Elapsed Time" ).grid(column=0,row=10)
Label(self, textvariable = self._elapsed_time ).grid(column=1,row=10)
Label(self, text = "Layer" ).grid(column=0,row=20)
Label(self, textvariable = self._current_layer ).grid(column=1,row=20)
Label(self, text = "Actual Height (mm)" ).grid(column=0,row=30)
Label(self, textvariable = self._current_height ).grid(column=1,row=30)
Label(self, text = "Model Height (mm)" ).grid(column=0,row=35)
Label(self, textvariable = self._current_model_height ).grid(column=1,row=35)
Label(self, text = "Drips" ).grid(column=0,row=40)
Label(self, textvariable = self._current_drips ).grid(column=1,row=40)
Label(self, text = "Waiting for drips" ).grid(column=0,row=50)
Label(self, textvariable = self._waiting_for_drips ).grid(column=1,row=50)
Label(self, text = "Skipped Layers" ).grid(column=0,row=55)
Label(self, textvariable = self._skipped_layers ).grid(column=1,row=55)
Label(self, text = "Status").grid(column=0,row=60)
Label(self, textvariable = self._status).grid(column=1,row=60)
Label(self).grid(column=0,row=70)
Button(self,textvariable=self._stop_button_text, command=self._stop_button_click).grid(column=2,row=80)
self.update()
def _stop_button_click(self):
self._print_api.stop()
self.navigate(self.kwargs['calling_class'], printer = self.kwargs['printer'])
def status_call_back(self,status):
total_seconds = int(status['elapsed_time'].total_seconds())
hours, remainder = divmod(total_seconds,60*60)
minutes, seconds = divmod(remainder,60)
self._elapsed_time.set("%02d:%02d:%02d" % (hours,minutes,seconds))
self._current_layer.set(status['current_layer'])
self._current_height.set("%.2f" % status['height'])
self._current_model_height.set("%.2f" % status['model_height'])
self._current_drips.set(status['drips'])
self._waiting_for_drips.set("Yes" if status['waiting_for_drips'] else "No")
self._skipped_layers.set(status['skipped_layers'])
self._status.set(status['status'])
if (status['status'] == "Complete"):
self._stop_button_text.set("Finished")
def close(self):
self._print_api.stop()
def test_print_can_be_stopped_before_started(self):
api = PrintAPI(self.DEFAULT_CONFIG)
api.stop()
class VerifyStatusUI(PeachyFrame):
def initialize(self):
self.grid()
self._elapsed_time = StringVar()
self._current_layer = IntVar()
self._current_height = StringVar()
self._current_model_height = StringVar()
self._errors = IntVar()
self._status = StringVar()
self._stop_button_text = StringVar()
self._stop_button_text.set("Abort Verification")
self._current_status = {}
self._print_api = PrintAPI(self.kwargs['config'],
status_call_back=self.status_call_back)
if 'filename' in self.kwargs:
file_to_print = self.kwargs['filename']
self._print_api.verify_gcode(file_to_print)
else:
self._print_api.verify_gcode(self.kwargs['layer_generator'])
Label(self, text="Verifying Model").grid(column=0, row=5)
Label(self).grid(column=0, row=8)
Label(self, text="Elapsed Time").grid(column=0, row=10)
Label(self, textvariable=self._elapsed_time).grid(column=1, row=10)
Label(self, text="Layer").grid(column=0, row=20)
Label(self, textvariable=self._current_layer).grid(column=1, row=20)
Label(self, text="Model Height (mm)").grid(column=0, row=35)
Label(self, textvariable=self._current_model_height).grid(column=1,
row=35)
Label(self, text="Status").grid(column=0, row=60)
Label(self, textvariable=self._status).grid(column=1, row=60)
Label(self, text="Errors").grid(column=0, row=70)
Label(self, textvariable=self._errors).grid(column=1, row=70)
Label(self).grid(column=0, row=70)
Button(self,
textvariable=self._stop_button_text,
command=self._stop_button_click).grid(column=2, row=80)
Button(self, text="Show Errors",
command=self._show_errors).grid(column=3, row=80)
self.update()
def _stop_button_click(self):
self._print_api.stop()
self.navigate(self.kwargs['calling_class'],
printer=self.kwargs['printer'])
def _show_errors(self):
PopUp(
self, 'Errors', '\n'.join([
"SubLayer %s : %s" % (err['layer'], err['message'])
for err in self._current_status['errors']
]))
def status_call_back(self, status):
total_seconds = int(status['elapsed_time'].total_seconds())
hours, remainder = divmod(total_seconds, 60 * 60)
minutes, seconds = divmod(remainder, 60)
self._elapsed_time.set("%02d:%02d:%02d" % (hours, minutes, seconds))
self._current_layer.set(status['current_layer'])
self._current_model_height.set("%.2f" % status['model_height'])
self._errors.set(len(status['errors']))
self._current_status = status
self._status.set(status['status'])
if (status['status'] == "Complete"):
self._stop_button_text.set("Finished")
def close(self):
self._print_api.stop()
class PrintStatusUI(PeachyFrame):
def initialize(self):
self.grid()
self._print_api = None
self._elapsed_time = StringVar()
self._current_layer = IntVar()
self._current_height = StringVar()
self._current_model_height = StringVar()
self._current_drips = IntVar()
self._waiting_for_drips = StringVar()
self._skipped_layers = IntVar()
self._status = StringVar()
self._stop_button_text = StringVar()
self._stop_button_text.set("Abort Print")
self._drips_per_second_setting = DoubleVar()
Label(self, text="Elapsed Time").grid(column=0, row=10)
Label(self, textvariable=self._elapsed_time).grid(column=1, row=10)
Label(self, text="Layer").grid(column=0, row=20)
Label(self, textvariable=self._current_layer).grid(column=1, row=20)
Label(self, text="Actual Height (mm)").grid(column=0, row=30)
Label(self, textvariable=self._current_height).grid(column=1, row=30)
Label(self, text="Model Height (mm)").grid(column=0, row=35)
Label(self, textvariable=self._current_model_height).grid(column=1,
row=35)
Label(self, text="Drips").grid(column=0, row=40)
Label(self, textvariable=self._current_drips).grid(column=1, row=40)
Label(self, text="Waiting for drips").grid(column=0, row=50)
Label(self, textvariable=self._waiting_for_drips).grid(column=1,
row=50)
Label(self, text="Skipped Layers").grid(column=0, row=55)
Label(self, textvariable=self._skipped_layers).grid(column=1, row=55)
Label(self, text="Status").grid(column=0, row=60)
Label(self, textvariable=self._status).grid(column=1, row=60)
self.options_frame = LabelFrame(self,
text="In Print Options",
padx=5,
pady=5)
self.options_frame.grid(column=12,
row=10,
rowspan=60,
sticky=N + S + E + W)
self.options_frame.grid_remove()
Label(self.options_frame, text='Drips Per Second').grid(column=0,
row=10)
RylanSpinbox(self.options_frame,
from_=0.0,
to=100.0,
increment=0.1,
command=self._dps_changed,
textvariable=self._drips_per_second_setting).grid(
column=1, row=10)
Label(self).grid(column=0, row=70)
Button(self,
textvariable=self._stop_button_text,
command=self._stop_button_click).grid(column=2, row=80)
self._print_api = PrintAPI(self.kwargs['config'],
status_call_back=self.status_call_back)
if 'filename' in self.kwargs:
file_to_print = self.kwargs['filename']
self._print_api.print_gcode(file_to_print)
else:
self._print_api.print_layers(self.kwargs['layer_generator'])
if self._print_api.can_set_drips_per_second():
self.options_frame.grid()
self._drips_per_second_setting.set(
self._print_api.get_drips_per_second())
self.update()
def _stop_button_click(self):
self._print_api.stop()
self.navigate(self.kwargs['calling_class'],
printer=self.kwargs['printer'])
def status_call_back(self, status):
total_seconds = int(status['elapsed_time'].total_seconds())
hours, remainder = divmod(total_seconds, 60 * 60)
minutes, seconds = divmod(remainder, 60)
self._elapsed_time.set("%02d:%02d:%02d" % (hours, minutes, seconds))
self._current_layer.set(status['current_layer'])
self._current_height.set("%.2f" % status['height'])
self._current_model_height.set("%.2f" % status['model_height'])
self._current_drips.set(status['drips'])
self._waiting_for_drips.set(
"Yes" if status['waiting_for_drips'] else "No")
self._skipped_layers.set(status['skipped_layers'])
self._status.set(status['status'])
if (status['status'] == "Complete"):
self._stop_button_text.set("Finished")
def _dps_changed(self):
self._print_api.set_drips_per_second(
self._drips_per_second_setting.get())
def close(self):
if self._print_api:
self._print_api.stop()
def test_print_can_be_stopped_before_started(self):
api = PrintAPI(self.default_config)
api.stop()