def sensor_send_value(sensor_id):
sensor = SensorInteractor.get(sensor_id)
if sensor:
if sensor.active:
gateways = GatewayInteractor.get_all_device_registered()
if gateways:
for gateway in gateways:
for sensor_method in sensor.sensor_methods:
if sensor_method.method.type == "write" and sensor_method.value:
r = request_helper.send_sensor_value(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path, sensor_method.value)
elif sensor_method.method.type == "read":
r = request_helper.get_sensor_value(sensor, sensor_method.method.path)
if r != False:
sensor_method.value = r
sensor_method.save()
r = request_helper.send_sensor_value(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path, sensor_method.value)
else:
app.logger.error("Getting value: Couldn't connect to YunServer - sensor %s (method %s) - path %s" % (sensor.id, sensor_method.method.id, sensor_method.method.path))
return jsonify({ "value" : 'error', 'error' : 'The arduino server is not available.' })
flash('Sensor method values successfully sent to gateway %s!' % gateway.address, category={ 'theme' : 'success' } )
else:
flash("No gateways with registered device!", category={ 'theme': 'warning' } )
return redirect("/sensors/#%s" % sensor.identificator)
else:
flash('Sensor is not active!', category={ 'theme': 'warning' } )
return redirect("/sensors/#%s" % sensor.identificator)
flash('Sensor does not exist!', category={ 'theme': 'error' } )
app.logger.error("Sending sensor values: Sensor does not exist")
return redirect("/sensors/")
def register_device_on_gateway(gateway_id):
gateway = GatewayInteractor.get(gateway_id)
if gateway:
r = request_helper.init_device(gateway.address, gateway.post_authorization)
if r != False:
if r.status_code == 201 or r.status_code == 409:
r = request_helper.init_descriptor(gateway.address, gateway.post_authorization)
if r != False:
r = request_helper.send_descriptor(gateway.address, gateway.post_authorization)
if r != False:
sensors = SensorInteractor.get_all_active()
if sensors:
for sensor in sensors:
if sensor.active:
sensor.save()
for sensor_method in sensor.sensor_methods:
r = request_helper.init_sensor(
gateway.address,
gateway.post_authorization,
sensor.identificator,
sensor_method.method.path,
)
if (
r != False
and sensor_method.method.type in ["read", "write"]
and sensor_method.value
):
request_helper.send_sensor_value(
gateway.address,
gateway.post_authorization,
sensor.identificator,
sensor_method.method.path,
sensor_method.value,
)
flash("Device successfully registered!", category={"theme": "success"})
gateway.device_registered = True
gateway.save()
elif r.status_code == 400 or r.status_code == 401:
flash("Wrong authorization for registration!", category={"theme": "error"})
app.logger.error("Registering device: Wrong authorization")
else:
flash("Something went wrong!", category={"theme": "error"})
app.logger.error("Registering device: Unknown error during device initialization")
else:
flash("Gateway does not exist!", category={"theme": "error"})
app.logger.error("Registering device: Gateway doesn't exist")
return redirect("/")
def ip_cron():
import json
from app.arduino.common import PublicIPInteractor
from urllib2 import urlopen
ip = PublicIPInteractor.get()
currentIP = "%s:%s" % ( json.load(urlopen('http://httpbin.org/ip'))['origin'].rstrip(), settings.PORT )
app.logger.info("---- START IP cron START----")
app.logger.info("IP ADDRESS - %s" % currentIP)
if ( not ip.address or ip.address != currentIP ):
try:
for gateway in GatewayInteractor.get_all_device_registered():
r = request_helper.delete_device(gateway.address, gateway.post_authorization)
if r != False:
app.logger.info("Delete dev: %d" % r.status_code)
ip.address = currentIP
ip.save()
r = request_helper.init_device(gateway.address, gateway.post_authorization)
if r != False:
app.logger.info("Init dev: %d" % r.status_code)
r = request_helper.init_descriptor(gateway.address, gateway.post_authorization)
if r != False:
app.logger.info("Init descriptor: %d" % r.status_code)
r = request_helper.send_descriptor(gateway.address, gateway.post_authorization)
if r != False:
app.logger.info("Descriptor: %d" % r.status_code)
for sensor in SensorInteractor.get_all_active():
for sensor_method in sensor.sensor_methods:
r = request_helper.delete_sensor(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path)
if r != False:
app.logger.info("Delete sensor method %s: %d" % (sensor_method.method.path, r.status_code))
r = request_helper.init_sensor(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path)
if r != False:
app.logger.info("Init sensor method %s: %d" % (sensor_method.method.path, r.status_code))
if sensor_method.method.type in ["read", "write"]:
r = request_helper.send_sensor_value(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path, sensor_method.value)
if r != False:
app.logger.info("Send method value %s: %d" % (sensor_method.method.path, r.status_code))
log = "%s - %s %s %s - %s (%s)" % ( gateway.address, sensor.module.hardware.name, sensor.module.name, sensor.identificator, sensor_method.method.path, sensor_method.value )
app.logger.info(log)
else:
ip.address = ""
ip.save()
else:
ip.address = ""
ip.save()
else:
ip.address = ""
ip.save()
except:
app.logger.error( "%s" % sys.exc_info()[0] )
ip.address = ""
ip.save()
else:
app.logger.warning("address wasn't changed")
app.logger.info("----END IP cron END----")
return make_response()
def activate_sensor(sensor_id):
sensor = SensorInteractor.get(sensor_id)
if sensor:
sensors = SensorInteractor.get_active_for_pin(sensor.pin.arduino_pin)
old_io = ""
if sensors:
for sensor_on_pin in sensors:
deactivate_sensor(sensor_on_pin.id, False)
old_io = sensor_on_pin.pin.io
sensor.active = True
sensor.save()
if sensor.pin.io != old_io:
r = request_helper.change_pin_mode(sensor.pin.arduino_pin, sensor.pin.io)
if r != False:
flash("Pin %s mode successfully changed to %s!" % (sensor.pin.arduino_pin, sensor.pin.io), category={'theme' : 'success'} )
else:
flash("Pin mode could not be changed!", category={'theme': 'error'})
app.logger.error("Activating sensor: Couldn't change pin mode - %s (%s)" % (sensor.pin.arduino_pin, sensor.pin.io))
for sensor_method in sensor.sensor_methods:
if sensor_method.method.type in ["read"]:
r = request_helper.get_sensor_value(sensor, sensor_method.method.path)
if r != False:
sensor_method.value = r
sensor_method.save()
else:
app.logger.error("Getting value: Couldn't connect to YunServer - sensor %s (method %s) - path %s" % (sensor.id, sensor_method.method.id, sensor_method.method.path))
return jsonify({ "value" : 'error', 'error' : 'The arduino server is not available.' })
gateways = GatewayInteractor.get_all_device_registered()
if gateways:
for gateway in gateways:
r = request_helper.send_descriptor(gateway.address, gateway.post_authorization)
if r != False:
for sensor_method in sensor.sensor_methods:
r = request_helper.init_sensor(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path)
if r != False and sensor_method.method.type in ["read", "write"] and sensor_method.value:
r = request_helper.send_sensor_value(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path, sensor_method.value)
flash('Sensor successfully added to gateway %s!' % gateway.address, category={ 'theme': 'success' } )
flash("Sensor activated!", category={ 'theme': 'success' } )
else:
flash("No gateways with registered device", category={ 'theme': 'warning' } )
return redirect("/sensors/#%s" % sensor.identificator)
flash("Sensor does not exist!", category={ 'theme': 'error' } )
app.logger.error("Activating sensor: Sensor does not exist")
return redirect("/sensors/")
def retargeting_sensor_toggle(identificator, method_path, value=None):
if request.remote_addr in [gateway.address.split(":")[1][2:] for gateway in GatewayInteractor.get_all_device_registered()]:
sensor = SensorInteractor.get_by_identificator(identificator)
if sensor and sensor.active:
method = MethodInteractor.get_by_path(method_path, sensor.module_id)
if method:
if method.type != "read":
sensor_method = SensorMethodsInteractor.get(sensor.id, method.id)
if sensor_method:
if sensor.pin.io == "output":
path = "/%s/%s/%s/%s" % (sensor.module.hardware.path, sensor.module.path, method_path, sensor.pin.pin)
if value:
path += "/%s" % value
r = request_helper.call_arduino_path( path )
if r != False:
if r.status_code == 200:
if r.text:
sensor_method.value = r.text
sensor_method.save()
for gateway in GatewayInteractor.get_all_device_registered():
request_helper.send_sensor_value(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path, sensor_method.value)
app.logger.info("Retargeting call: %s - %s (%s)" % (identificator, method_path, sensor_method.value))
return make_response((r.text, r.status_code))
app.logger.error("Retargeting call: Can't reach sensor - %s" % (sensor.identificator, ))
return make_response(("400: The sensor can't be reached!", 400))
app.logger.error("Retargeting call: Called method for an INPUT sensor - %s" % (sensor.identificator))
return make_response(("400: You are calling a method for an INPUT sensor!", 400))
app.logger.error("Retargeting call: Invalid method for sensor - %s (%s)" % (sensor.identificator, method_path))
return make_response(("400: Invalid method for sensor!", 400))
app.logger.error("Retargeting call: Called read method - %s (%s)" % (sensor.identificator, method_path))
return make_response(("400: You are calling a read method!", 400))
app.logger.error("Retargeting call: Invalid method for sensor - %s (%s)" % (sensor.identificator, method_path))
return make_response(("400: Invalid method for sensor!", 400))
app.logger.error("Retargeting call: Sensor doesn't exist - %s" % (identificator, ))
return make_response(("400: Non existant sensor!", 400))
app.logger.error("Retargeting call: Request didn't come from registered GW - %s" % (request.remote_addr, ))
return make_response(("400: You are not allowed to access this device!", 400))
def cron():
app.logger.info("----START cron START----")
try:
for gateway in GatewayInteractor.get_all_device_registered():
for sensor in SensorInteractor.get_all_active():
for sensor_method in sensor.sensor_methods:
if sensor_method.method.type in ["read", "write"]:
if sensor_method.method.type == "read":
r = request_helper.get_sensor_value(sensor, sensor_method.method.path)
if r != False:
sensor_method.value = r
sensor_method.save()
if sensor_method.value:
r = request_helper.send_sensor_value(gateway.address, gateway.post_authorization, sensor.identificator, sensor_method.method.path, sensor_method.value)
if r != False:
log = "%s - %s %s %s - %s (%s)" % ( gateway.address, sensor.module.hardware.name, sensor.module.name, sensor.identificator, sensor_method.method.path, sensor_method.value )
app.logger.info(log)
else:
app.logger.error("CRON getting value: Couldn't connect to YunServer - sensor %s (method %s) - path %s" % (sensor.id, sensor_method.method.id, sensor_method.method.path))
return make_response()
except:
app.logger.error( "%s" % sys.exc_info()[0] )
app.logger.info("----END cron END----")
return make_response()