def create_uas_logs(self, user, entries):
"""Create a list of uas telemetry logs.
Args:
user: User to create logs for.
entries: List of (lat, lon, alt) tuples for each entry.
Returns:
List of UasTelemetry objects
"""
ret = []
for (lat, lon, alt) in entries:
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
log.save()
ret.append(log)
return ret
def test_get_waypoint_travel_time(self):
"""Tests travel time calc."""
test_spds = [1, 10, 100, 500]
for (lon2, lat2, lon1, lat1, dist_km) in TESTDATA_COMPETITION_DIST:
dist_ft = units.kilometers_to_feet(dist_km)
for speed in test_spds:
speed_fps = units.knots_to_feet_per_second(speed)
time = dist_ft / speed_fps
gpos1 = GpsPosition()
gpos1.latitude = lat1
gpos1.longitude = lon1
gpos1.save()
apos1 = AerialPosition()
apos1.gps_position = gpos1
apos1.altitude_msl = 0
apos1.save()
wpt1 = Waypoint()
wpt1.position = apos1
gpos2 = GpsPosition()
gpos2.latitude = lat2
gpos2.longitude = lon2
gpos2.save()
apos2 = AerialPosition()
apos2.gps_position = gpos2
apos2.altitude_msl = 0
apos2.save()
wpt2 = Waypoint()
wpt2.position = apos2
waypoints = [wpt1, wpt2]
obstacle = MovingObstacle()
obstacle.speed_avg = speed
self.assertTrue(
self.eval_travel_time(
obstacle.get_waypoint_travel_time(waypoints, 0, 1),
time))
def test_get_waypoint_travel_time(self):
"""Tests travel time calc."""
test_spds = [1, 10, 100, 500]
for (lon2, lat2, lon1, lat1, dist_km) in TESTDATA_COMPETITION_DIST:
dist_ft = units.kilometers_to_feet(dist_km)
for speed in test_spds:
speed_fps = units.knots_to_feet_per_second(speed)
time = dist_ft / speed_fps
gpos1 = GpsPosition()
gpos1.latitude = lat1
gpos1.longitude = lon1
gpos1.save()
apos1 = AerialPosition()
apos1.gps_position = gpos1
apos1.altitude_msl = 0
apos1.save()
wpt1 = Waypoint()
wpt1.position = apos1
gpos2 = GpsPosition()
gpos2.latitude = lat2
gpos2.longitude = lon2
gpos2.save()
apos2 = AerialPosition()
apos2.gps_position = gpos2
apos2.altitude_msl = 0
apos2.save()
wpt2 = Waypoint()
wpt2.position = apos2
waypoints = [wpt1, wpt2]
obstacle = MovingObstacle()
obstacle.speed_avg = speed
self.assertTrue(self.eval_travel_time(
obstacle.get_waypoint_travel_time(waypoints, 0, 1), time))
def setUp(self):
"""Sets up the tests."""
super(TestOdlc, self).setUp()
self.user = User.objects.create_user('user', '*****@*****.**',
'pass')
# Mission
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
self.mission = MissionConfig()
self.mission.home_pos = pos
self.mission.emergent_last_known_pos = pos
self.mission.off_axis_odlc_pos = pos
self.mission.air_drop_pos = pos
self.mission.save()
self.mission.mission_waypoints.add(wpt)
self.mission.search_grid_points.add(wpt)
self.mission.save()
def setUp(self):
# Mission
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
self.mission = MissionConfig()
self.mission.home_pos = pos
self.mission.emergent_last_known_pos = pos
self.mission.off_axis_odlc_pos = pos
self.mission.air_drop_pos = pos
self.mission.save()
self.mission.mission_waypoints.add(wpt)
self.mission.search_grid_points.add(wpt)
self.mission.save()
# Mission 2
self.mission2 = MissionConfig()
self.mission2.home_pos = pos
self.mission2.emergent_last_known_pos = pos
self.mission2.off_axis_odlc_pos = pos
self.mission2.air_drop_pos = pos
self.mission2.save()
self.mission2.mission_waypoints.add(wpt)
self.mission2.search_grid_points.add(wpt)
self.mission2.save()
def create_moving_obstacle(self, waypoints):
"""Create a new MovingObstacle model.
Args:
waypoints: List of (lat, lon, alt) tuples
Returns:
Saved MovingObstacle
"""
obstacle = MovingObstacle(speed_avg=40, sphere_radius=100)
obstacle.save()
for num, waypoint in enumerate(waypoints):
(lat, lon, alt) = waypoint
gps = GpsPosition(latitude=lat, longitude=lon)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=alt)
pos.save()
waypoint = Waypoint(order=num, position=pos)
waypoint.save()
obstacle.waypoints.add(waypoint)
obstacle.save()
return obstacle
def create_moving_obstacle(self, waypoints):
"""Create a new MovingObstacle model.
Args:
waypoints: List of (lat, lon, alt) tuples
Returns:
Saved MovingObstacle
"""
obstacle = MovingObstacle(speed_avg=40, sphere_radius=100)
obstacle.save()
for num, waypoint in enumerate(waypoints):
(lat, lon, alt) = waypoint
gps = GpsPosition(latitude=lat, longitude=lon)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=alt)
pos.save()
waypoint = Waypoint(order=num, position=pos)
waypoint.save()
obstacle.waypoints.add(waypoint)
obstacle.save()
return obstacle
def create_uas_logs(self, user, entries):
"""Create a list of uas telemetry logs.
Args:
user: User to create logs for.
entries: List of (lat, lon, alt) tuples for each entry.
Returns:
List of UasTelemetry objects
"""
ret = []
for (lat, lon, alt) in entries:
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
log.save()
ret.append(log)
return ret
def create_logs(self,
user,
num=10,
start=None,
delta=None,
altitude=100,
heading=90):
if start is None:
start = timezone.now()
if delta is None:
delta = datetime.timedelta(seconds=1)
logs = []
for i in xrange(num):
gps = GpsPosition(latitude=38 + 0.001 * i,
longitude=-78 + 0.001 * i)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=altitude)
pos.save()
log = UasTelemetry(user=user,
uas_position=pos,
uas_heading=heading)
log.save()
log.timestamp = start + i * delta
log.save()
logs.append(log)
return logs
def setUp(self):
self.user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
self.user.save()
# Mission
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.latitude = 10
apos.longitude = 100
apos.altitude_msl = 1000
apos.save()
wpt = Waypoint()
wpt.latitude = 10
wpt.longitude = 100
wpt.altitude_msl = 1000
wpt.order = 10
wpt.save()
self.mission = MissionConfig()
self.mission.home_pos = pos
self.mission.emergent_last_known_pos = pos
self.mission.off_axis_odlc_pos = pos
self.mission.air_drop_pos = pos
self.mission.save()
self.mission.mission_waypoints.add(wpt)
self.mission.search_grid_points.add(wpt)
self.mission.save()
self.now = timezone.now()
def setUp(self):
"""Creates test data."""
# Form test set for contains position
self.testdata_containspos = []
for test_data in TESTDATA_FLYZONE_CONTAINSPOS:
# Create the FlyZone
zone = FlyZone()
zone.altitude_msl_min = test_data['min_alt']
zone.altitude_msl_max = test_data['max_alt']
zone.save()
for waypoint_id in range(len(test_data['waypoints'])):
(lat, lon) = test_data['waypoints'][waypoint_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = 0
apos.save()
wpt = Waypoint()
wpt.order = waypoint_id
wpt.position = apos
wpt.save()
zone.boundary_pts.add(wpt)
# Form test set
test_pos = []
for pos in test_data['inside_pos']:
test_pos.append((pos, True))
for pos in test_data['outside_pos']:
test_pos.append((pos, False))
# Store
self.testdata_containspos.append((zone, test_pos))
def setUp(self):
"""Creates test data."""
# Form test set for contains position
self.testdata_containspos = []
for test_data in TESTDATA_FLYZONE_CONTAINSPOS:
# Create the FlyZone
zone = FlyZone()
zone.altitude_msl_min = test_data['min_alt']
zone.altitude_msl_max = test_data['max_alt']
zone.save()
for waypoint_id in range(len(test_data['waypoints'])):
(lat, lon) = test_data['waypoints'][waypoint_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = 0
apos.save()
wpt = Waypoint()
wpt.order = waypoint_id
wpt.position = apos
wpt.save()
zone.boundary_pts.add(wpt)
# Form test set
test_pos = []
for pos in test_data['inside_pos']:
test_pos.append((pos, True))
for pos in test_data['outside_pos']:
test_pos.append((pos, False))
# Store
self.testdata_containspos.append((zone, test_pos))
def create_uas_logs(self, user, entries):
"""Create a list of uas telemetry logs.
Args:
user: User to create logs for.
entries: List of (lat, lon, alt) tuples for each entry.
Returns:
List of UasTelemetry objects
"""
ret = []
for i in range(len(entries)):
lat, lon, alt = entries[i]
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
if i > 0:
log.timetamp = ret[i - 1].timestamp + timedelta(seconds=1)
log.save()
ret.append(log)
return ret
def create_logs(self,
user,
num=10,
start=None,
delta=None,
altitude=100,
heading=90):
if start is None:
start = timezone.now()
if delta is None:
delta = datetime.timedelta(seconds=1)
logs = []
for i in xrange(num):
gps = GpsPosition(
latitude=38 + 0.001 * i, longitude=-78 + 0.001 * i)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=altitude)
pos.save()
log = UasTelemetry(
user=user, uas_position=pos, uas_heading=heading)
log.save()
log.timestamp = start + i * delta
log.save()
logs.append(log)
return logs
def test_unicode(self):
"""Tests the unicode method executes."""
gps = GpsPosition(latitude=10, longitude=100)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=100)
pos.save()
pos.__unicode__()
def test_unicode(self):
"""Tests the unicode method executes."""
gps = GpsPosition(latitude=10, longitude=100)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=100)
pos.save()
pos.__unicode__()
def setUp(self):
"""Create the obstacles for testing."""
# Obstacle with no waypoints
obst_no_wpt = MovingObstacle()
obst_no_wpt.speed_avg = 1
obst_no_wpt.sphere_radius = 1
obst_no_wpt.save()
self.obst_no_wpt = obst_no_wpt
# Obstacle with single waypoint
self.single_wpt_lat = 40
self.single_wpt_lon = 76
self.single_wpt_alt = 100
obst_single_wpt = MovingObstacle()
obst_single_wpt.speed_avg = 1
obst_single_wpt.sphere_radius = 1
obst_single_wpt.save()
single_gpos = GpsPosition()
single_gpos.latitude = self.single_wpt_lat
single_gpos.longitude = self.single_wpt_lon
single_gpos.save()
single_apos = AerialPosition()
single_apos.gps_position = single_gpos
single_apos.altitude_msl = self.single_wpt_alt
single_apos.save()
single_wpt = Waypoint()
single_wpt.position = single_apos
single_wpt.order = 1
single_wpt.save()
obst_single_wpt.waypoints.add(single_wpt)
self.obst_single_wpt = obst_single_wpt
# Obstacles with predefined path
self.obstacles = []
for path in TESTDATA_MOVOBST_PATHS:
cur_obst = MovingObstacle()
cur_obst.speed_avg = 68
cur_obst.sphere_radius = 10
cur_obst.save()
for pt_id in range(len(path)):
(lat, lon, alt) = path[pt_id]
cur_gpos = GpsPosition()
cur_gpos.latitude = lat
cur_gpos.longitude = lon
cur_gpos.save()
cur_apos = AerialPosition()
cur_apos.gps_position = cur_gpos
cur_apos.altitude_msl = alt
cur_apos.save()
cur_wpt = Waypoint()
cur_wpt.position = cur_apos
cur_wpt.order = pt_id
cur_wpt.save()
cur_obst.waypoints.add(cur_wpt)
cur_obst.save()
self.obstacles.append(cur_obst)
def setUp(self):
"""Create the obstacles for testing."""
# Obstacle with no waypoints
obst_no_wpt = MovingObstacle()
obst_no_wpt.speed_avg = 1
obst_no_wpt.sphere_radius = 1
obst_no_wpt.save()
self.obst_no_wpt = obst_no_wpt
# Obstacle with single waypoint
self.single_wpt_lat = 40
self.single_wpt_lon = 76
self.single_wpt_alt = 100
obst_single_wpt = MovingObstacle()
obst_single_wpt.speed_avg = 1
obst_single_wpt.sphere_radius = 1
obst_single_wpt.save()
single_gpos = GpsPosition()
single_gpos.latitude = self.single_wpt_lat
single_gpos.longitude = self.single_wpt_lon
single_gpos.save()
single_apos = AerialPosition()
single_apos.gps_position = single_gpos
single_apos.altitude_msl = self.single_wpt_alt
single_apos.save()
single_wpt = Waypoint()
single_wpt.position = single_apos
single_wpt.order = 1
single_wpt.save()
obst_single_wpt.waypoints.add(single_wpt)
self.obst_single_wpt = obst_single_wpt
# Obstacles with predefined path
self.obstacles = []
for path in TESTDATA_MOVOBST_PATHS:
cur_obst = MovingObstacle()
cur_obst.speed_avg = 68
cur_obst.sphere_radius = 10
cur_obst.save()
for pt_id in range(len(path)):
(lat, lon, alt) = path[pt_id]
cur_gpos = GpsPosition()
cur_gpos.latitude = lat
cur_gpos.longitude = lon
cur_gpos.save()
cur_apos = AerialPosition()
cur_apos.gps_position = cur_gpos
cur_apos.altitude_msl = alt
cur_apos.save()
cur_wpt = Waypoint()
cur_wpt.position = cur_apos
cur_wpt.order = pt_id
cur_wpt.save()
cur_obst.waypoints.add(cur_wpt)
cur_obst.save()
self.obstacles.append(cur_obst)
def create_log_element(self, lat, lon, alt, user, log_time):
pos = GpsPosition(latitude=lat, longitude=lon)
pos.save()
apos = AerialPosition(gps_position=pos, altitude_msl=alt)
apos.save()
log = UasTelemetry(user=user, uas_position=apos, uas_heading=100, )
log.save()
log.timestamp = log_time
log.save()
return log
def test_evaluate_collision_with_uas(self):
"""Tests the collision with UAS method."""
# Get test data
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
user.save()
testdata = TESTDATA_MOVOBST_EVALCOLLISION
(obst_rad, obst_speed, obst_pos, log_details) = testdata
# Create the obstacle
obst = MovingObstacle()
obst.speed_avg = obst_speed
obst.sphere_radius = obst_rad
obst.save()
for pos_id in xrange(len(obst_pos)):
(lat, lon, alt) = obst_pos[pos_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = alt
apos.save()
wpt = Waypoint()
wpt.order = pos_id
wpt.position = apos
wpt.save()
obst.waypoints.add(wpt)
obst.save()
# Create sets of logs
epoch = timezone.now().replace(year=1970,
month=1,
day=1,
hour=0,
minute=0,
second=0,
microsecond=0)
inside_logs = []
outside_logs = []
for (time_sec, inside_pos, outside_pos) in log_details:
log_time = epoch + datetime.timedelta(seconds=time_sec)
logs_pos = [(inside_pos, inside_logs), (outside_pos, outside_logs)]
for (positions, log_list) in logs_pos:
for (lat, lon, alt) in positions:
log = self.create_log(lat, lon, alt, user, log_time)
log_list.append(log)
# Assert the obstacle correctly computes collisions
log_collisions = [(True, inside_logs), (False, outside_logs)]
for (inside, logs) in log_collisions:
self.assertEqual(obst.evaluate_collision_with_uas(logs), inside)
for log in logs:
self.assertEqual(obst.evaluate_collision_with_uas([log]),
inside)
def create_log_element(self, timestamp, user, lat, lon, alt, heading):
pos = GpsPosition(latitude=lat, longitude=lon)
pos.save()
apos = AerialPosition(gps_position=pos, altitude_msl=alt)
apos.save()
log = UasTelemetry(timestamp=timezone.now(),
user=user,
uas_position=apos,
uas_heading=heading)
log.save()
return log
def create_log_element(self, timestamp, user, lat, lon, alt, heading):
pos = GpsPosition(latitude=lat, longitude=lon)
pos.save()
apos = AerialPosition(gps_position=pos, altitude_msl=alt)
apos.save()
log = UasTelemetry(timestamp=timezone.now(),
user=user,
uas_position=apos,
uas_heading=heading)
log.save()
return log
def create_log_element(self, lat, lon, alt, user, log_time):
pos = GpsPosition(latitude=lat, longitude=lon)
pos.save()
apos = AerialPosition(gps_position=pos, altitude_msl=alt)
apos.save()
log = UasTelemetry(
user=user,
uas_position=apos,
uas_heading=100, )
log.save()
log.timestamp = log_time
log.save()
return log
def create_log_element(self, timestamp, lat, lon, alt, heading, user=None):
if user is None:
user = self.user
pos = GpsPosition(latitude=lat, longitude=lon)
pos.save()
apos = AerialPosition(gps_position=pos, altitude_msl=alt)
apos.save()
log = UasTelemetry(user=user, uas_position=apos, uas_heading=heading)
log.save()
log.timestamp = self.now + datetime.timedelta(seconds=timestamp)
log.save()
return log
def setUp(self):
super(TestTakeoffOrLandingEventModel, self).setUp()
# Mission
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.latitude = 10
apos.longitude = 100
apos.altitude_msl = 1000
apos.save()
wpt = Waypoint()
wpt.latitude = 10
wpt.longitude = 100
wpt.altitude_msl = 1000
wpt.order = 10
wpt.save()
self.mission = MissionConfig()
self.mission.home_pos = pos
self.mission.lost_comms_pos = pos
self.mission.emergent_last_known_pos = pos
self.mission.off_axis_odlc_pos = pos
self.mission.map_center_pos = pos
self.mission.map_height_ft = 1
self.mission.air_drop_pos = pos
self.mission.ugv_drive_pos = pos
self.mission.save()
self.mission.mission_waypoints.add(wpt)
self.mission.search_grid_points.add(wpt)
self.mission.save()
# Mission 2
self.mission2 = MissionConfig()
self.mission2.home_pos = pos
self.mission2.lost_comms_pos = pos
self.mission2.emergent_last_known_pos = pos
self.mission2.off_axis_odlc_pos = pos
self.mission2.map_center_pos = pos
self.mission2.map_height_ft = 1
self.mission2.air_drop_pos = pos
self.mission2.ugv_drive_pos = pos
self.mission2.save()
self.mission2.mission_waypoints.add(wpt)
self.mission2.search_grid_points.add(wpt)
self.mission2.save()
self.ten_minutes = datetime.timedelta(minutes=10)
def post(self, request):
"""Posts the UAS position with a POST request."""
telemetry_proto = interop_api_pb2.Telemetry()
try:
json_format.Parse(request.body, telemetry_proto)
except Exception as e:
return HttpResponseBadRequest(
'Failed to parse request. Error: %s' % str(e))
if (not telemetry_proto.HasField('latitude') or
not telemetry_proto.HasField('longitude') or
not telemetry_proto.HasField('altitude') or
not telemetry_proto.HasField('heading')):
return HttpResponseBadRequest('Request missing fields.')
# Check the values make sense.
if telemetry_proto.latitude < -90 or telemetry_proto.latitude > 90:
return HttpResponseBadRequest('Latitude out of range [-90, 90]: %f'
% telemetry_proto.latitude)
if telemetry_proto.longitude < -180 or telemetry_proto.longitude > 180:
return HttpResponseBadRequest(
'Longitude out of range [-180, 180]: %f' %
telemetry_proto.longitude)
if telemetry_proto.altitude < -1500 or telemetry_proto.altitude > 330000:
return HttpResponseBadRequest(
'Altitude out of range [-1500, 330000]: %f' %
telemetry_proto.altitude)
if telemetry_proto.heading < 0 or telemetry_proto.heading > 360:
return HttpResponseBadRequest(
'Heading out of range [0, 360]: %f' % telemetry_proto.heading)
# Store telemetry.
gpos = GpsPosition(
latitude=telemetry_proto.latitude,
longitude=telemetry_proto.longitude)
gpos.save()
apos = AerialPosition(
gps_position=gpos, altitude_msl=telemetry_proto.altitude)
apos.save()
telemetry = UasTelemetry(
user=request.user,
uas_position=apos,
uas_heading=telemetry_proto.heading)
telemetry.save()
return HttpResponse('UAS Telemetry Successfully Posted.')
def evaluate_inputs(self, io_list):
for (lon1, lat1, alt1, lon2, lat2, alt2, dist) in io_list:
gps1 = GpsPosition(latitude=lat1, longitude=lon1)
gps1.save()
gps2 = GpsPosition(latitude=lat2, longitude=lon2)
gps2.save()
pos1 = AerialPosition(gps_position=gps1, altitude_msl=alt1)
pos1.save()
pos2 = AerialPosition(gps_position=gps2, altitude_msl=alt2)
pos2.save()
wpt1 = Waypoint(position=pos1)
wpt2 = Waypoint(position=pos2)
self.assertDistanceEqual(wpt1, wpt2, dist)
def evaluate_inputs(self, io_list):
for (lon1, lat1, alt1, lon2, lat2, alt2, dist) in io_list:
gps1 = GpsPosition(latitude=lat1, longitude=lon1)
gps1.save()
gps2 = GpsPosition(latitude=lat2, longitude=lon2)
gps2.save()
pos1 = AerialPosition(gps_position=gps1, altitude_msl=alt1)
pos1.save()
pos2 = AerialPosition(gps_position=gps2, altitude_msl=alt2)
pos2.save()
wpt1 = Waypoint(position=pos1)
wpt2 = Waypoint(position=pos2)
self.assertDistanceEqual(wpt1, wpt2, dist)
def setUp(self):
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
config = MissionConfig()
config.home_pos = pos
config.emergent_last_known_pos = pos
config.off_axis_odlc_pos = pos
config.air_drop_pos = pos
config.save()
config.mission_waypoints.add(wpt)
config.search_grid_points.add(wpt)
config.save()
user = User.objects.create_user('user', '*****@*****.**', 'pass')
self.feedback = MissionJudgeFeedback(
mission=config,
user=user,
flight_time=datetime.timedelta(seconds=1),
post_process_time=datetime.timedelta(seconds=2),
used_timeout=True,
min_auto_flight_time=True,
safety_pilot_takeovers=3,
waypoints_captured=5,
out_of_bounds=6,
unsafe_out_of_bounds=7,
things_fell_off_uas=False,
crashed=False,
air_drop_accuracy=interop_admin_api_pb2.MissionJudgeFeedback.
WITHIN_05_FT,
ugv_drove_to_location=False,
operational_excellence_percent=9)
self.feedback.save()
def waypoints_from_data(self, waypoints_data):
"""Converts tuples of lat/lon/alt to a waypoint."""
waypoints = []
for i, waypoint in enumerate(waypoints_data):
(lat, lon, alt) = waypoint
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = i
wpt.save()
waypoints.append(wpt)
return waypoints
def waypoints_from_data(self, waypoints_data):
"""Converts tuples of lat/lon/alt to a waypoint."""
waypoints = []
for i, waypoint in enumerate(waypoints_data):
(lat, lon, alt) = waypoint
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = i
wpt.save()
waypoints.append(wpt)
return waypoints
def test_evaluate_collision_with_uas(self):
"""Tests the collision with UAS method."""
# Create testing data
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
user.save()
(cyl_details, inside_pos,
outside_pos) = TESTDATA_STATOBST_EVALCOLLISION
(cyl_lat, cyl_lon, cyl_height, cyl_rad) = cyl_details
gpos = GpsPosition(latitude=cyl_lat, longitude=cyl_lon)
gpos.save()
obst = StationaryObstacle(gps_position=gpos,
cylinder_radius=cyl_rad,
cylinder_height=cyl_height)
obst.save()
inside_logs = []
outside_logs = []
logs_to_create = [
(inside_pos, inside_logs), (outside_pos, outside_logs)
]
for (positions, log_list) in logs_to_create:
for (lat, lon, alt) in positions:
gpos = GpsPosition(latitude=lat, longitude=lon)
gpos.save()
apos = AerialPosition(gps_position=gpos, altitude_msl=alt)
apos.save()
log = UasTelemetry(user=user, uas_position=apos, uas_heading=0)
log.save()
log_list.append(log)
# Assert collisions correctly evaluated
collisions = [(inside_logs, True), (outside_logs, False)]
for (log_list, inside) in collisions:
self.assertEqual(
obst.evaluate_collision_with_uas(log_list), inside)
for log in log_list:
self.assertEqual(
obst.evaluate_collision_with_uas([log]), inside)
def create_data(self):
"""Create a basic sample dataset."""
self.user1 = User.objects.create_user('user1', '*****@*****.**',
'testpass')
self.user1.save()
self.user2 = User.objects.create_user('user2', '*****@*****.**',
'testpass')
self.user2.save()
# user1 is on mission
event = MissionClockEvent(user=self.user1,
team_on_clock=True,
team_on_timeout=False)
event.save()
# user1 is flying
event = TakeoffOrLandingEvent(user=self.user1, uas_in_air=True)
event.save()
# user2 has landed
event = TakeoffOrLandingEvent(user=self.user2, uas_in_air=True)
event.save()
event = TakeoffOrLandingEvent(user=self.user2, uas_in_air=False)
event.save()
# user2 is active
self.timestamp = timezone.now()
gps = GpsPosition(latitude=38.6462, longitude=-76.2452)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=0)
pos.save()
self.telem = UasTelemetry(user=self.user2,
uas_position=pos,
uas_heading=90)
self.telem.save()
self.telem.timestamp = dateutil.parser.parse(
u'2016-10-01T00:00:00.0+00:00')
self.telem.save()
def create_data(self):
"""Create a basic sample dataset."""
self.user1 = User.objects.create_user('user1', '*****@*****.**',
'testpass')
self.user1.save()
self.user2 = User.objects.create_user('user2', '*****@*****.**',
'testpass')
self.user2.save()
# user1 is on mission
event = MissionClockEvent(user=self.user1,
team_on_clock=True,
team_on_timeout=False)
event.save()
# user1 is flying
event = TakeoffOrLandingEvent(user=self.user1, uas_in_air=True)
event.save()
# user2 has landed
event = TakeoffOrLandingEvent(user=self.user2, uas_in_air=True)
event.save()
event = TakeoffOrLandingEvent(user=self.user2, uas_in_air=False)
event.save()
# user2 is active
self.timestamp = timezone.now()
gps = GpsPosition(latitude=38.6462, longitude=-76.2452)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=0)
pos.save()
self.telem = UasTelemetry(user=self.user2,
uas_position=pos,
uas_heading=90)
self.telem.save()
self.telem.timestamp = dateutil.parser.parse(
u'2016-10-01T00:00:00.0+00:00')
self.telem.save()
def test_unicode(self):
"""Tests the unicode method executes."""
obst = MovingObstacle()
obst.speed_avg = 10
obst.sphere_radius = 100
obst.save()
for _ in range(3):
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
obst.waypoints.add(wpt)
self.assertTrue(obst.__unicode__())
def test_unicode(self):
"""Tests the unicode method executes."""
obst = MovingObstacle()
obst.speed_avg = 10
obst.sphere_radius = 100
obst.save()
for _ in range(3):
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
obst.waypoints.add(wpt)
self.assertTrue(obst.__unicode__())
def test_unicode(self):
"""Tests the unicode method executes."""
zone = FlyZone()
zone.altitude_msl_min = 1
zone.altitude_msl_max = 2
zone.save()
for _ in range(3):
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
zone.boundary_pts.add(wpt)
self.assertTrue(zone.__unicode__())
def test_unicode(self):
"""Tests the unicode method executes."""
zone = FlyZone()
zone.altitude_msl_min = 1
zone.altitude_msl_max = 2
zone.save()
for _ in range(3):
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
zone.boundary_pts.add(wpt)
self.assertTrue(zone.__unicode__())
def create_logs(self, user, num=10, start=None, delta=None):
if start is None:
start = timezone.now()
if delta is None:
delta = datetime.timedelta(seconds=1)
logs = []
for i in xrange(num):
gps_position = GpsPosition(latitude=0, longitude=0)
gps_position.save()
uas_position = AerialPosition(gps_position=gps_position,
altitude_msl=0)
uas_position.save()
log = UasTelemetry(user=user,
uas_position=uas_position,
uas_heading=0.0)
log.save()
log.timestamp = start + i * delta
log.save()
logs.append(log)
return logs
def create_logs(self, user, num=10, start=None, delta=None):
if start is None:
start = timezone.now()
if delta is None:
delta = datetime.timedelta(seconds=1)
logs = []
for i in xrange(num):
gps_position = GpsPosition(latitude=0, longitude=0)
gps_position.save()
uas_position = AerialPosition(gps_position=gps_position,
altitude_msl=0)
uas_position.save()
log = UasTelemetry(user=user,
uas_position=uas_position,
uas_heading=0.0)
log.save()
log.timestamp = start + i * delta
log.save()
logs.append(log)
return logs
def test_unicode(self):
"""Tests the unicode method executes."""
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
config = MissionConfig()
config.home_pos = pos
config.emergent_last_known_pos = pos
config.off_axis_target_pos = pos
config.air_drop_pos = pos
config.save()
config.mission_waypoints.add(wpt)
config.search_grid_points.add(wpt)
config.save()
self.assertTrue(config.__unicode__())
def test_unicode(self):
"""Tests the unicode method executes."""
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
config = MissionConfig()
config.home_pos = pos
config.emergent_last_known_pos = pos
config.off_axis_target_pos = pos
config.air_drop_pos = pos
config.save()
config.mission_waypoints.add(wpt)
config.search_grid_points.add(wpt)
config.save()
self.assertTrue(config.__unicode__())
def test_out_of_bounds(self):
"""Tests the UAS out of bounds method."""
(zone_details, uas_details) = TESTDATA_FLYZONE_EVALBOUNDS
# Create FlyZone objects
zones = []
for (alt_min, alt_max, wpts) in zone_details:
zone = FlyZone()
zone.altitude_msl_min = alt_min
zone.altitude_msl_max = alt_max
zone.save()
for wpt_id in xrange(len(wpts)):
(lat, lon) = wpts[wpt_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = 0
apos.save()
wpt = Waypoint()
wpt.order = wpt_id
wpt.position = apos
wpt.save()
zone.boundary_pts.add(wpt)
zone.save()
zones.append(zone)
# For each user, validate time out of bounds
user_id = 0
epoch = timezone.now().replace(year=1970,
month=1,
day=1,
hour=0,
minute=0,
second=0,
microsecond=0)
for exp_violations, exp_out_of_bounds_time, log_details in uas_details:
# Create the logs
user = User.objects.create_user('testuser%d' % user_id,
'*****@*****.**', 'testpass')
user_id += 1
uas_logs = []
for (lat, lon, alt, timestamp) in log_details:
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = alt
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
log.save()
log.timestamp = epoch + datetime.timedelta(seconds=timestamp)
log.save()
uas_logs.append(log)
# Assert out of bounds time matches expected
num_violations, out_of_bounds_time = \
FlyZone.out_of_bounds(zones, uas_logs)
self.assertEqual(num_violations, exp_violations)
self.assertAlmostEqual(out_of_bounds_time, exp_out_of_bounds_time)
def post(self, request):
"""Posts the UAS position with a POST request.
User must send a POST request with the following paramters:
latitude: A latitude in decimal degrees.
longitude: A logitude in decimal degrees.
altitude_msl: An MSL altitude in decimal feet.
uas_heading: The UAS (true north) heading in decimal degrees.
"""
try:
# Get the parameters
latitude = float(request.POST['latitude'])
longitude = float(request.POST['longitude'])
altitude_msl = float(request.POST['altitude_msl'])
uas_heading = float(request.POST['uas_heading'])
except KeyError:
# Failed to get POST parameters
logger.warning(
'User did not specify all params for uas telemetry request.')
logger.debug(request)
return HttpResponseBadRequest(
'Posting UAS position must contain POST parameters "latitude", '
'"longitude", "altitude_msl", and "uas_heading".')
except ValueError:
# Failed to convert parameters
logger.warning(
'User specified a param which could not converted to an ' +
'appropriate type.')
logger.debug(request)
return HttpResponseBadRequest(
'Failed to convert provided POST parameters to correct form.')
else:
# Check the values make sense
if latitude < -90 or latitude > 90:
logger.warning('User specified latitude out of valid range.')
logger.debug(request)
return HttpResponseBadRequest(
'Must provide latitude between -90 and 90 degrees.')
if longitude < -180 or longitude > 180:
logger.warning('User specified longitude out of valid range.')
logger.debug(request)
return HttpResponseBadRequest(
'Must provide longitude between -180 and 180 degrees.')
if uas_heading < 0 or uas_heading > 360:
logger.warning('User specified altitude out of valid range.')
logger.debug(request)
return HttpResponseBadRequest(
'Must provide heading between 0 and 360 degrees.')
# Store telemetry
logger.info('User uploaded telemetry: %s' % request.user.username)
gpos = GpsPosition(latitude=latitude, longitude=longitude)
gpos.save()
apos = AerialPosition(gps_position=gpos, altitude_msl=altitude_msl)
apos.save()
telemetry = UasTelemetry(user=request.user,
uas_position=apos,
uas_heading=uas_heading)
telemetry.save()
return HttpResponse('UAS Telemetry Successfully Posted.')
def test_satisfied_waypoints(self):
"""Tests the evaluation of waypoints method."""
# Create mission config
gpos = GpsPosition()
gpos.latitude = 10
gpos.longitude = 10
gpos.save()
config = MissionConfig()
config.home_pos = gpos
config.emergent_last_known_pos = gpos
config.off_axis_target_pos = gpos
config.air_drop_pos = gpos
config.save()
# Create waypoints for config
waypoints = [(38, -76, 100), (39, -77, 200), (40, -78, 0)]
for i, waypoint in enumerate(waypoints):
(lat, lon, alt) = waypoint
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = i
wpt.save()
config.mission_waypoints.add(wpt)
config.save()
# Create UAS telemetry logs
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
# Only first is valid.
entries = [(38, -76, 140), (40, -78, 600), (37, -75, 40)]
expect = ({0: 40}, {0: 0.6, 1: 0.0, 2: 0.0}, {0: 40, 1: 460785.17})
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# First and last are valid, but missed second, so third doesn't count.
entries = [(38, -76, 140), (40, -78, 600), (40, -78, 40)]
expect = ({0: 40}, {0: 0.6, 1: 0.0, 2: 0.0}, {0: 40, 1: 460785.03})
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 40)]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Only hit the first waypoint on run one, hit all on run two.
entries = [(38, -76, 140),
(40, -78, 600),
(37, -75, 40),
# Run two:
(38, -76, 140),
(39, -77, 180),
(40, -78, 40)]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all on run one, only hit the first waypoint on run two.
entries = [(38, -76, 140),
(39, -77, 180),
(40, -78, 40),
# Run two:
(38, -76, 140),
(40, -78, 600),
(37, -75, 40)]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Keep flying after hitting all waypoints.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 40),
(30.1, -78.1, 100)]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all in first run, but second is higher scoring.
entries = [(38, -76, 140),
(39, -77, 180),
(40, -78, 60),
# Run two:
(38, -76, 100),
(39, -77, 200),
(40, -78, 110)]
expect = ({0: 0, 1: 0}, {0: 1, 1: 1, 2: 0}, {0: 0, 1: 0, 2: 60})
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Restart waypoint path in the middle.
waypoints = [(38, -76, 100), (39, -77, 200), (40, -78, 0)]
entries = [(38, -76, 140),
(39, -77, 180),
# Restart:
(38, -76, 70),
(39, -77, 150),
(40, -78, 10)]
expect = ({0: 30, 1: 50, 2: 10},
{0: 0.7, 1: 0.5, 2: 0.9},
{0: 30, 1: 20, 2: 10}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
def post(self, request):
"""Posts the UAS position with a POST request.
User must send a POST request with the following paramters:
latitude: A latitude in decimal degrees.
longitude: A logitude in decimal degrees.
altitude_msl: An MSL altitude in decimal feet.
uas_heading: The UAS (true north) heading in decimal degrees.
"""
try:
# Get the parameters
latitude = float(request.POST['latitude'])
longitude = float(request.POST['longitude'])
altitude_msl = float(request.POST['altitude_msl'])
uas_heading = float(request.POST['uas_heading'])
except KeyError:
# Failed to get POST parameters
logger.warning(
'User did not specify all params for uas telemetry request.')
logger.debug(request)
return HttpResponseBadRequest(
'Posting UAS position must contain POST parameters "latitude", '
'"longitude", "altitude_msl", and "uas_heading".')
except ValueError:
# Failed to convert parameters
logger.warning(
'User specified a param which could not converted to an ' +
'appropriate type.')
logger.debug(request)
return HttpResponseBadRequest(
'Failed to convert provided POST parameters to correct form.')
else:
# Check the values make sense
if latitude < -90 or latitude > 90:
logger.warning('User specified latitude out of valid range.')
logger.debug(request)
return HttpResponseBadRequest(
'Must provide latitude between -90 and 90 degrees.')
if longitude < -180 or longitude > 180:
logger.warning('User specified longitude out of valid range.')
logger.debug(request)
return HttpResponseBadRequest(
'Must provide longitude between -180 and 180 degrees.')
if uas_heading < 0 or uas_heading > 360:
logger.warning('User specified altitude out of valid range.')
logger.debug(request)
return HttpResponseBadRequest(
'Must provide heading between 0 and 360 degrees.')
# Store telemetry
logger.info('User uploaded telemetry: %s' % request.user.username)
gpos = GpsPosition(latitude=latitude, longitude=longitude)
gpos.save()
apos = AerialPosition(gps_position=gpos, altitude_msl=altitude_msl)
apos.save()
telemetry = UasTelemetry(
user=request.user, uas_position=apos, uas_heading=uas_heading)
telemetry.save()
return HttpResponse('UAS Telemetry Successfully Posted.')
def test_satisfied_waypoints(self):
"""Tests the evaluation of waypoints method."""
# Create mission config
gpos = GpsPosition()
gpos.latitude = 10
gpos.longitude = 10
gpos.save()
config = MissionConfig()
config.home_pos = gpos
config.emergent_last_known_pos = gpos
config.off_axis_target_pos = gpos
config.air_drop_pos = gpos
config.save()
# Create waypoints for config
waypoints = [(38, -76, 100), (39, -77, 200), (40, -78, 0)]
for i, waypoint in enumerate(waypoints):
(lat, lon, alt) = waypoint
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = i
wpt.save()
config.mission_waypoints.add(wpt)
config.save()
# Create UAS telemetry logs
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
def assertSatisfiedWaypoints(expect, got):
"""Assert two satisfied_waypoints return values are equal."""
self.assertEqual(expect[0], got[0])
self.assertEqual(expect[1], got[1])
for k in expect[2].keys():
self.assertIn(k, got[2])
self.assertAlmostEqual(expect[2][k], got[2][k], delta=0.1)
for k in got[2].keys():
self.assertIn(k, expect[2])
# Only first is valid.
entries = [(38, -76, 140), (40, -78, 600), (37, -75, 40)]
expect = (1, 1, {0: 40, 1: 460785.17})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# First and last are valid, but missed second, so third doesn't count.
entries = [(38, -76, 140), (40, -78, 600), (40, -78, 40)]
expect = (1, 1, {0: 40, 1: 460785.03})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 40)]
expect = (3, 3, {0: 40, 1: 20, 2: 40})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all, but don't stay within waypoint track.
entries = [(38, -76, 140), (39, -77, 180), (41, -78, 40),
(40, -78, 40)]
expect = (3, 2, {0: 40, 1: 20, 2: 40})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Only hit the first waypoint on run one, hit all on run two.
entries = [(38, -76, 140),
(40, -78, 600),
(37, -75, 40),
# Run two:
(38, -76, 140),
(39, -77, 180),
(40, -78, 40)]
expect = (3, 3, {0: 40, 1: 20, 2: 40})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all on run one, only hit the first waypoint on run two.
entries = [(38, -76, 140),
(39, -77, 180),
(40, -78, 40),
# Run two:
(38, -76, 140),
(40, -78, 600),
(37, -75, 40)]
expect = (3, 3, {0: 40, 1: 20, 2: 40})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Remain on the waypoint track only on the second run.
entries = [(38, -76, 140),
(39, -77, 180),
(41, -78, 40),
(40, -78, 40),
# Run two:
(38, -76, 140),
(39, -77, 180),
(40, -78, 40)]
expect = (3, 3, {0: 40, 1: 20, 2: 40})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Keep flying after hitting all waypoints.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 40),
(30.1, -78.1, 100)]
expect = (3, 3, {0: 40, 1: 20, 2: 40})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Miss last target by a sane distance.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 60)]
expect = (2, 2, {0: 40, 1: 20, 2: 60})
logs = self.create_uas_logs(user, entries)
assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
def create_data(self):
"""Create a basic sample dataset."""
self.user1 = User.objects.create_user('user1', '*****@*****.**',
'testpass')
self.user1.save()
self.user2 = User.objects.create_user('user2', '*****@*****.**',
'testpass')
self.user2.save()
# Mission
pos = GpsPosition()
pos.latitude = 10
pos.longitude = 100
pos.save()
apos = AerialPosition()
apos.altitude_msl = 1000
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = 10
wpt.save()
self.mission = MissionConfig()
self.mission.home_pos = pos
self.mission.emergent_last_known_pos = pos
self.mission.off_axis_odlc_pos = pos
self.mission.air_drop_pos = pos
self.mission.save()
self.mission.mission_waypoints.add(wpt)
self.mission.search_grid_points.add(wpt)
self.mission.save()
# user1 is flying
event = TakeoffOrLandingEvent(user=self.user1,
mission=self.mission,
uas_in_air=True)
event.save()
# user2 has landed
event = TakeoffOrLandingEvent(user=self.user2,
mission=self.mission,
uas_in_air=True)
event.save()
event = TakeoffOrLandingEvent(user=self.user2,
mission=self.mission,
uas_in_air=False)
event.save()
# user2 is active
self.timestamp = timezone.now()
gps = GpsPosition(latitude=38.6462, longitude=-76.2452)
gps.save()
pos = AerialPosition(gps_position=gps, altitude_msl=0)
pos.save()
self.telem = UasTelemetry(user=self.user2,
uas_position=pos,
uas_heading=90)
self.telem.save()
self.telem.timestamp = dateutil.parser.parse(
u'2016-10-01T00:00:00.0+00:00')
self.telem.save()
def test_satisfied_waypoints(self):
"""Tests the evaluation of waypoints method."""
# Create mission config
gpos = GpsPosition()
gpos.latitude = 10
gpos.longitude = 10
gpos.save()
config = MissionConfig()
config.home_pos = gpos
config.emergent_last_known_pos = gpos
config.off_axis_target_pos = gpos
config.air_drop_pos = gpos
config.save()
# Create waypoints for config
waypoints = [(38, -76, 100), (39, -77, 200), (40, -78, 0)]
for i, waypoint in enumerate(waypoints):
(lat, lon, alt) = waypoint
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
wpt = Waypoint()
wpt.position = apos
wpt.order = i
wpt.save()
config.mission_waypoints.add(wpt)
config.save()
# Create UAS telemetry logs
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
# Only first is valid.
entries = [(38, -76, 140), (40, -78, 600), (37, -75, 40)]
expect = ({0: 40}, {0: 0.6, 1: 0.0, 2: 0.0}, {0: 40, 1: 460785.17})
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# First and last are valid, but missed second, so third doesn't count.
entries = [(38, -76, 140), (40, -78, 600), (40, -78, 40)]
expect = ({0: 40}, {0: 0.6, 1: 0.0, 2: 0.0}, {0: 40, 1: 460785.03})
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 40)]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Only hit the first waypoint on run one, hit all on run two.
entries = [
(38, -76, 140),
(40, -78, 600),
(37, -75, 40),
# Run two:
(38, -76, 140),
(39, -77, 180),
(40, -78, 40)
]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all on run one, only hit the first waypoint on run two.
entries = [
(38, -76, 140),
(39, -77, 180),
(40, -78, 40),
# Run two:
(38, -76, 140),
(40, -78, 600),
(37, -75, 40)
]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Keep flying after hitting all waypoints.
entries = [(38, -76, 140), (39, -77, 180), (40, -78, 40),
(30.1, -78.1, 100)]
expect = ({0: 40, 1: 20, 2: 40},
{0: 0.6, 1: 0.8, 2: 0.6},
{0: 40, 1: 20, 2: 40}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Hit all in first run, but second is higher scoring.
entries = [
(38, -76, 140),
(39, -77, 180),
(40, -78, 60),
# Run two:
(38, -76, 100),
(39, -77, 200),
(40, -78, 110)
]
expect = ({0: 0, 1: 0}, {0: 1, 1: 1, 2: 0}, {0: 0, 1: 0, 2: 60})
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
# Restart waypoint path in the middle.
waypoints = [(38, -76, 100), (39, -77, 200), (40, -78, 0)]
entries = [
(38, -76, 140),
(39, -77, 180),
# Restart:
(38, -76, 70),
(39, -77, 150),
(40, -78, 10)
]
expect = ({0: 30, 1: 50, 2: 10},
{0: 0.7, 1: 0.5, 2: 0.9},
{0: 30, 1: 20, 2: 10}) # yapf: disable
logs = self.create_uas_logs(user, entries)
self.assertSatisfiedWaypoints(expect, config.satisfied_waypoints(logs))
def test_out_of_bounds(self):
"""Tests the UAS out of bounds method."""
(zone_details, uas_details) = TESTDATA_FLYZONE_EVALBOUNDS
# Create FlyZone objects
zones = []
for (alt_min, alt_max, wpts) in zone_details:
zone = FlyZone()
zone.altitude_msl_min = alt_min
zone.altitude_msl_max = alt_max
zone.save()
for wpt_id in xrange(len(wpts)):
(lat, lon) = wpts[wpt_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = 0
apos.save()
wpt = Waypoint()
wpt.order = wpt_id
wpt.position = apos
wpt.save()
zone.boundary_pts.add(wpt)
zone.save()
zones.append(zone)
# For each user, validate time out of bounds
user_id = 0
epoch = timezone.now().replace(year=1970,
month=1,
day=1,
hour=0,
minute=0,
second=0,
microsecond=0)
for exp_violations, exp_out_of_bounds_time, log_details in uas_details:
# Create the logs
user = User.objects.create_user('testuser%d' % user_id,
'*****@*****.**', 'testpass')
user_id += 1
uas_logs = []
for (lat, lon, alt, timestamp) in log_details:
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = alt
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
log.save()
log.timestamp = epoch + datetime.timedelta(seconds=timestamp)
log.save()
uas_logs.append(log)
# Assert out of bounds time matches expected
num_violations, out_of_bounds_time = \
FlyZone.out_of_bounds(zones, uas_logs)
self.assertEqual(num_violations, exp_violations)
self.assertAlmostEqual(out_of_bounds_time.total_seconds(),
exp_out_of_bounds_time)
def test_interpolated_collision(self):
# Get test data
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
user.save()
utm = distance.proj_utm(zone=18, north=True)
(obst_rad, obst_speed, obst_pos, log_details) = TESTDATA_MOVOBST_INTERP
# Create the obstacle
obst = MovingObstacle()
obst.speed_avg = obst_speed
obst.sphere_radius = obst_rad
obst.save()
for pos_id in xrange(len(obst_pos)):
(lat, lon, alt) = obst_pos[pos_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = alt
apos.save()
wpt = Waypoint()
wpt.order = pos_id
wpt.position = apos
wpt.save()
obst.waypoints.add(wpt)
obst.save()
for (inside, log_list) in log_details:
logs = []
for i in range(len(log_list)):
lat, lon, alt = log_list[i]
pos = GpsPosition()
pos.latitude = lat
pos.longitude = lon
pos.save()
apos = AerialPosition()
apos.altitude_msl = alt
apos.gps_position = pos
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
log.save()
if i == 0:
log.timestamp = timezone.now().replace(year=1970,
month=1,
day=1,
hour=0,
minute=0,
second=0,
microsecond=0)
if i > 0:
log.timestamp = (
logs[i - 1].timestamp + datetime.timedelta(seconds=1))
logs.append(log)
self.assertEqual(
obst.determine_interpolated_collision(logs[0], logs[1], utm),
inside)
def test_evaluate_collision_with_uas(self):
"""Tests the collision with UAS method."""
# Get test data
user = User.objects.create_user('testuser', '*****@*****.**',
'testpass')
user.save()
testdata = TESTDATA_MOVOBST_EVALCOLLISION
(obst_rad, obst_speed, obst_pos, log_details) = testdata
# Create the obstacle
obst = MovingObstacle()
obst.speed_avg = obst_speed
obst.sphere_radius = obst_rad
obst.save()
for pos_id in xrange(len(obst_pos)):
(lat, lon, alt) = obst_pos[pos_id]
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = alt
apos.save()
wpt = Waypoint()
wpt.order = pos_id
wpt.position = apos
wpt.save()
obst.waypoints.add(wpt)
obst.save()
# Create sets of logs
epoch = timezone.now().replace(year=1970,
month=1,
day=1,
hour=0,
minute=0,
second=0,
microsecond=0)
inside_logs = []
outside_logs = []
for (time_sec, inside_pos, outside_pos) in log_details:
log_time = epoch + datetime.timedelta(seconds=time_sec)
logs_pos = [(inside_pos, inside_logs), (outside_pos, outside_logs)]
for (positions, log_list) in logs_pos:
for (lat, lon, alt) in positions:
gpos = GpsPosition()
gpos.latitude = lat
gpos.longitude = lon
gpos.save()
apos = AerialPosition()
apos.gps_position = gpos
apos.altitude_msl = alt
apos.save()
log = UasTelemetry()
log.user = user
log.uas_position = apos
log.uas_heading = 0
log.save()
log.timestamp = log_time
log.save()
log_list.append(log)
# Assert the obstacle correctly computes collisions
log_collisions = [(True, inside_logs), (False, outside_logs)]
for (inside, logs) in log_collisions:
self.assertEqual(obst.evaluate_collision_with_uas(logs), inside)
for log in logs:
self.assertEqual(
obst.evaluate_collision_with_uas([log]), inside)
