def _get_chassis_data(session):
"""Capture chassis data as would be returned from (not all chassis data is being captured):
:param session: The session object returned from brcdapi.fos_auth.login()
:type session: dict
:return: FID list
:rtype: list
"""
global _chassis_rest_data
# Get all the chassis data
# Note that in Gen 6 and above, the license ID, brocade-chassis/chassis/license-id, may not be the chassis WWN
for kpi in _chassis_rest_data: # See comments with _chassis_rest_data above
ml = ['', kpi
] # The first member as '' inserts a blank line before the KPI
obj = brcdapi_rest.get_request(session, kpi)
if brcdapi_auth.is_error(obj):
ml.append(brcdapi_auth.formatted_error_msg(obj))
else:
ml.append(pprint.pformat(obj))
brcdapi_log.log(ml, True)
"""This is essentially a hybrid of lscfg --show and switchshow. This is where all the logical switches and ports
associated with those logical switches are reported. I broke this out from _chassis_rest_data because we need to
pick out the fabric IDs of all the logical switches."""
kpi = 'running/brocade-fibrechannel-logical-switch/fibrechannel-logical-switch'
ml = ['', kpi]
obj = brcdapi_rest.get_request(session, kpi)
if brcdapi_auth.is_error(obj):
ml.append(brcdapi_auth.formatted_error_msg(obj))
brcdapi_log.log(ml, True)
return list(
) # A return in the middle of a method is common in Python after an error is encountered.
ml.append(pprint.pformat(obj))
"""Normally, I would build a dictionary of the ports so I could treat them as objects and add port
configuration, port statistics, and anything else port specific to the object.
I don't recall how a non-VF enabled switch responds but I don't think 'fabric-id' is present in the response.
If you are new to Python, there is a construct referred to as a list comprehension which allows you to build a
list in a single line of code. The code that follows this comment is equivalent to:
fid_list = list()
for ls in obj['fibrechannel-logical-switch']:
if ls.get('fabric-id') is not None:
fid_list.append(ls.get('fabric-id'))
return fid_list"""
return [
ls.get('fabric-id') for ls in obj['fibrechannel-logical-switch']
if ls.get('fabric-id') is not None
]
def checksum(session, fid, echo=False):
"""Gets a zoning transaction checksum
:param session: Session object returned from brcdapi.pyfos_auth.login()
:type session: dict
:param fid: Logical FID number for the fabric of interest
:type fid: int
:param echo: If True, echoes any error messages to STD_OUT
:type echo: bool
:return: checksum
:rtype: int, None
:return: brcdapi_rest status object
:rtype: dict
"""
# Get the checksum - this is needed to save the configuration.
obj = brcdapi_rest.get_request(session,
'brocade-zone/effective-configuration', fid)
if _is_error(
obj,
'Failed to get zone data from "brocade-zone/effective-configuration"',
echo):
return None, obj
try:
return obj.get('effective-configuration').get('checksum'), obj
except:
brcdapi_log.log('Failed to get checksum', echo)
brcdapi_log.exception(pprint.pformat(obj, indent=4), echo)
return None, pyfos_auth.create_error(
brcdapi_util.HTTP_INT_SERVER_ERROR,
brcdapi_util.HTTP_REASON_UNEXPECTED_RESP,
'Missing effective-configuration/checksum')
def get_chassis(session, proj_obj):
"""Gets the chassis object and objects for all logical switches in the chassis.
:param session: Session object returned from brcdapi.pyfos_auth.login()
:type session: dict
:param proj_obj: The project object
:type proj_obj: brcddb.classes.project.ProjectObj
:return: Chassis object
:rtype: brcddb.classes.ChassisObj
"""
# See if we already got it
if 'chassis_wwn' in session:
chassis_obj = proj_obj.r_chassis_obj(session.get('chassis_wwn'))
if chassis_obj is not None:
return chassis_obj
# Go get it
uri = 'brocade-chassis/chassis'
obj = brcdapi_rest.get_request(session, uri, None)
if pyfos_auth.is_error(obj):
return None
try:
wwn = obj.get('chassis').get('chassis-wwn')
chassis_obj = proj_obj.s_add_chassis(wwn)
results_action(chassis_obj, obj, uri)
session.update(dict(chassis_wwn=wwn))
# Get all the switches in this chassis
if chassis_obj.r_is_vf_enabled(): # Get all the logical switches in this chassis
uri = 'brocade-fibrechannel-logical-switch/fibrechannel-logical-switch'
obj = brcdapi_rest.get_request(session, uri, None)
if pyfos_auth.is_error(obj):
_process_errors(session, uri, obj, chassis_obj)
fid_l = list()
else:
results_action(chassis_obj, obj, uri)
fid_l = [d.get('fabric-id') for d in obj.get('fibrechannel-logical-switch')]
else:
fid_l = [None]
for fid in fid_l:
uri = 'brocade-fabric/fabric-switch'
obj = brcdapi_rest.get_request(session, uri, fid)
_process_errors(session, uri, obj, chassis_obj)
results_action(chassis_obj, obj, uri)
return chassis_obj
except:
_process_errors(session, uri, session, proj_obj)
return None
def login(user_id, pw, ip_addr, https='none', proj_obj=None):
"""Log in and capture a list of supported modules.
:param user_id: User ID
:type user_id: str
:param pw: Password
:type pw: str
:param ip_addr: IP address
:type ip_addr: str
:param https: If 'CA' or 'self', uses https to login. Otherwise, http.
:type https: None, str
:param proj_obj: Project object
:type proj_obj: brcddb.classes.project.ProjectObj, None
:return: session
:rtype: dict
"""
# Attempt to log in
tip = brcdapi_util.mask_ip_addr(ip_addr, True)
session = brcdapi_rest.login(user_id, pw, ip_addr, https)
if pyfos_auth.is_error(session):
brcdapi_log.log(tip + ' Login failed', True)
_process_errors(session, '/rest/login', session, proj_obj)
return session
else:
brcdapi_log.log(tip + ' Login succeeded', True)
# Figure out what modules this FOS version supports
# Step 1: Read all the module information from FOS
uri = 'brocade-module-version'
obj = brcdapi_rest.get_request(session, uri)
if pyfos_auth.is_error(obj):
brcdapi_log.log(tip + ' ERROR: ' + uri + '\n' + pyfos_auth.formatted_error_msg(obj), True)
return session
# Step 2: Parse the module information and add it to the session object
kpi_list = list()
for mod_obj in obj.get(uri).get('module'):
name = mod_obj.get('name')
if name is None:
brcdapi_log.exception("'name' mising in brocade-module-version", True)
continue
kpi_list.append(name)
try: # I think 'object' will always be there, just empty when there are no objects. Try/Except just in case.
for mod_object in mod_obj.get('objects').get('object'):
kpi_list.append(name + '/' + mod_object)
except:
pass
session.update(dict(supported_uris=kpi_list))
return session
def pseudo_main():
"""Basically the main(). Did it this way so it can easily be modified to be called from another script.
:return: Exit code. See exit codes in brcddb.brcddb_common
:rtype: int
"""
# Get the command line input
ip_addr, user_id, pw, sec = _get_input()
# Login
brcdapi_log.log('Attempting login', True)
session = brcdapi_rest.login(user_id, pw, ip_addr, sec)
if fos_auth.is_error(session):
brcdapi_log.log('Login failed. Error message is:', True)
brcdapi_log.log(fos_auth.formatted_error_msg(session), True)
return -1
brcdapi_log.log([
'Login succeeded', 'Getting certificates. This will take about 30 sec.'
], True)
try: # This try is to ensure the logout code gets executed regardless of what happened.
# Get the certificates from the API
cert_obj = brcdapi_rest.get_request(
session, 'running/brocade-security/security-certificate')
except BaseException as e:
brcdapi_log.exception(
'Unexpected error encountered. Exception is: ' + str(e), True)
# Logout
brcdapi_log.log('Attempting logout', True)
obj = brcdapi_rest.logout(session)
if fos_auth.is_error(obj):
brcdapi_log.log('Logout failed. Error message is:', True)
brcdapi_log.log(fos_auth.formatted_error_msg(obj), True)
return -1
brcdapi_log.log('Logout succeeded.', True)
# Display the certificates
if fos_auth.is_error(cert_obj):
brcdapi_log.exception(
'Failed to capture certificates.' +
fos_auth.formatted_error_msg(cert_obj), True)
return -1
_cert_detail_report(cert_obj)
_cert_summary_report(cert_obj)
return 0
def get_rest(session, uri, wobj=None, fid=None):
"""Wraps loging around a call to brcdapi_rest.get_request()
:param session: Session object returned from brcdapi.pyfos_auth.login()
:type session: dict
:param uri: URI, less the prefix
:type uri: str
:param wobj: Working object
:type: ProjectObj, FabricObj, SwitchObj, ChassisObj
:param fid: Fabric ID
:type fid: int, None
:return: obj
:rtype: dict
"""
brcdapi_log.log('GET: ' + uri + brcdapi_rest.vfid_to_str(fid), True)
obj = brcdapi_rest.get_request(session, uri, fid)
_process_errors(session, uri, obj, wobj)
return obj
def _get_switch_data(session, fid):
"""Capture switch, fabric, and port data as would be returned from (not all data is being captured):
:param session: The session object returned from brcdapi.fos_auth.login()
:type session: dict
:param fid: Fabric ID to execute the switch level commands against. Use None for non-VF enabled switches
:type fid: int, None
"""
global _switch_rest_data
for kpi in _switch_rest_data: # See comments with _switch_rest_data above
ml = ['', kpi
] # The first member as '' inserts a blank line before the KPI
obj = brcdapi_rest.get_request(session, kpi, fid)
if brcdapi_auth.is_error(obj):
ml.append(brcdapi_auth.formatted_error_msg(obj))
else:
ml.append(pprint.pformat(obj))
brcdapi_log.log(ml, True)
def get_ge_port_list(session, fid):
"""Returns the list of GE ports in a logical switch
:param session: Session object returned from brcdapi.brcdapi_auth.login()
:type session: dict
:param fid: Logical switch FID number
:type fid: int
:return: List of GE ports
:rtype: list
"""
obj = brcdapi_rest.get_request(
session,
'running/brocade-fibrechannel-logical-switch/fibrechannel-logical-switch/fabric-id/'
+ str(fid))
if brcdapi_auth.is_error(obj):
brcdapi_log.log(brcdapi_auth.formatted_error_msg(obj), True)
return list()
if 'fibrechannel-logical-switch' in obj and 'ge-port-member-list' in obj[
'fibrechannel-logical-switch']:
pl = obj['fibrechannel-logical-switch']['ge-port-member-list'].get(
'port-member')
return list() if pl is None else pl
return list()
def pseudo_main():
"""Basically the main().
:return: Exit code
:rtype: int
"""
global _DEBUG
# Get and validate command line input
ml = ['WARNING!!! Debug is enabled'] if _DEBUG else list()
ip, user_id, pw, sec, fid_str, vd, log, nl = parse_args()
if not nl:
brcdapi_log.open_log(log)
if vd:
brcdapi_rest.verbose_debug = True
if fid_str.isdigit():
fid = int(fid_str)
else:
brcdapi_log.log('Invalid FID: ' + fid_str, True)
return -1
brcdapi_log.log(ml, True)
# Login
brcdapi_log.log('Attempting login', True)
session = brcdapi_rest.login(user_id, pw, ip, sec)
if brcdapi_auth.is_error(session):
brcdapi_log.log('Login failed', True)
brcdapi_log.log(brcdapi_auth.formatted_error_msg(session), True)
return -1
brcdapi_log.log('Login succeeded', True)
ec = 0
try: # I always do a try in code development so that if there is a code bug, I still log out.
# Get FC port list for this FID by reading the configurations
kpi = 'running/brocade-interface/fibrechannel'
obj = brcdapi_rest.get_request(session, kpi, fid)
if brcdapi_auth.is_error(obj):
brcdapi_log.log('Failed to read ' + kpi + ' for fid ' + str(fid),
True)
ec = -1
else:
# Get the port lists
fc_plist = [port.get('name') for port in obj.get('fibrechannel')]
# Disable all ports and set to the default configuration.
brcdapi_log.log(
'Disabling all ports of fid: ' + str(fid) +
' and setting to default configuration', True)
obj = brcdapi_port.default_port_config(session, fid, fc_plist)
if brcdapi_auth.is_error(obj):
brcdapi_log.log(
'Set ports to default for FID ' + str(fid) + ' failed',
True)
brcdapi_log.log(brcdapi_auth.formatted_error_msg(obj), True)
ec = -1
else:
brcdapi_log.log(
'Successfully set all ports for FID ' + str(fid) +
' to the default configuration', True)
except:
brcdapi_log.log('Encountered a programming error', True)
ec = -1
# Logout
obj = brcdapi_rest.logout(session)
if brcdapi_auth.is_error(obj):
brcdapi_log.log(
'Logout failed:\n' + brcdapi_auth.formatted_error_msg(obj), True)
return ec
def pseudo_main():
"""Basically the main().
:return: Exit code
:rtype: int
"""
global _DEBUG
# Get and validate command line input
ec, ip, user_id, pw, sec, input_d = _get_input()
if ec != 0:
return ec
# Login
brcdapi_log.log('Attempting login', True)
session = brcdapi_rest.login(user_id, pw, ip, sec)
if fos_auth.is_error(session):
brcdapi_log.log(fos_auth.formatted_error_msg(session), True)
return -1
brcdapi_log.log('Login succeeded', True)
ec = 0
uri = 'running/brocade-chassis/management-interface-configuration'
try: # try/except so that no matter what happens, the logout code gets executed.
# Display initial read (GET) of parameters
brcdapi_log.log(['', 'Before Changes:'], True)
obj = brcdapi_rest.get_request(session, uri)
if fos_auth.is_error(obj):
brcdapi_log.log(fos_auth.formatted_error_msg(obj), True)
ec = -1
else:
brcdapi_log.log(pprint.pformat(obj), True)
if ec == 0:
# Make the changes
content_d = dict()
for k, v in input_d.items():
if v is not None:
content_d.update({k: v})
if len(content_d) == 0:
brcdapi_log.log('No changes to make.', True)
else:
obj = brcdapi_rest.send_request(
session, uri, 'PATCH',
{'management-interface-configuration': content_d})
if fos_auth.is_error(obj):
brcdapi_log.log(fos_auth.formatted_error_msg(obj), True)
ec = -1
else:
# Display read (GET) after changing parameters
brcdapi_log.log(['', 'After Changes:'], True)
obj = brcdapi_rest.get_request(session, uri)
if fos_auth.is_error(obj):
brcdapi_log.log(fos_auth.formatted_error_msg(obj),
True)
ec = -1
else:
brcdapi_log.log(pprint.pformat(obj), True)
except BaseException as e:
brcdapi_log.exception(
'Programming error encountered. Exception is: ' + str(e), True)
ec = -1
# Logout
obj = brcdapi_rest.logout(session)
if fos_auth.is_error(obj):
brcdapi_log.log('Logout failed', True)
ec = -1
else:
brcdapi_log.log('Logout succeeded', True)
return ec
def modify_zone(session,
fid,
zone,
add_members,
del_members,
in_add_pmembers=None,
in_del_pmembers=None,
echo=False):
"""Adds and removes members from a zone.
:param session: Session object returned from brcdapi.pyfos_auth.login()
:type session: dict
:param fid: Logical FID number
:type fid: int
:param zone: Name of zone to be modified
:type zone: str
:param add_members: Members to add to the zone
:type add_members: list
:param del_members: Members to delete from the zone
:type del_members: list
:param add_pmembers: Principal members to add to zone. Only relevant for peer zones
:type add_pmembers: list
:param del_pmembers: Principal members to delete from a zone. Only relevant for peer zones
:type del_pmembers: list
:param echo: If True, echoes any error messages to STD_OUT
:type echo: bool
:return: brcdapi_rest status object
:rtype: dict
"""
add_pmembers = list() if in_add_pmembers is None else in_add_pmembers
del_pmembers = list() if in_del_pmembers is None else in_del_pmembers
# This method reads the zone to change, makes the modifications in a local object, and PATCHes the change. I'm
# assuming the type of zone could be changed but this method is just changing the membership. See "Important Notes"
control = {
'principal-entry-name': {
'add_mem': add_pmembers,
'del_mem': del_pmembers
},
'entry-name': {
'add_mem': add_members,
'del_mem': del_members
},
}
# Read in the current defined zone
obj = brcdapi_rest.get_request(
session, 'brocade-zone/defined-configuration/zone/zone-name/' + zone,
fid)
if _is_error(obj, 'Failed reading zone ' + zone, echo):
return obj
# Modify the zone
d = obj.get('zone')
if d is None:
return pyfos_auth.create_error(
brcdapi_util.HTTP_BAD_REQUEST,
brcdapi_util.HTTP_REASON_MAL_FORMED_OBJ,
'Missing leaf "zone" in returned object for ' + zone)
me = d.get('member-entry')
if me is None:
me = dict(
) # I'm not sure what FOS returns if all the members were deleted so this is just to be safe
d.update({'member-entry': me})
for k, v in control.items():
ml = me.get(k)
if len(v.get('add_mem')) + len(v.get('del_mem')) > 0:
if ml is None:
ml = list(
) # Just a safety net. Similar to 'member-entry' above.
me.update(
{k: ml}
) # If there are principle members to a non-peer zone, FOS returns an error
for mem in v.get('add_mem'):
ml.append(mem)
for mem in v.get('del_mem'):
try:
ml.remove(mem)
except:
pyfos_auth.create_error(
brcdapi_util.HTTP_BAD_REQUEST, 'Delete error',
'Member ' + mem + ' does not exist')
content = {'defined-configuration': obj}
obj = brcdapi_rest.send_request(session,
'brocade-zone/defined-configuration',
'PATCH', content, fid)
_is_error(obj, 'Failed to create zones', echo)
return obj
def pseudo_main():
"""Basically the main(). Did it this way to use with IDE
:return: Exit code
:rtype: int
"""
ml = ['WARNING!!! Debug is enabled'] if _DEBUG else list()
ip, user_id, pw, sec, fids, vd, log, nl = parse_args()
if vd:
brcdapi_rest.verbose_debug = True
if sec is None:
sec = 'none'
if not nl:
brcdapi_log.open_log(log)
fl = [int(f) for f in fids.split(',')]
ml.append('FIDs: ' + fids)
brcdapi_log.log(ml, True)
# Login
session = brcdapi_rest.login(user_id, pw, ip, sec)
if brcdapi_auth.is_error(session):
brcdapi_log.log(
'Login failed:\n' + brcdapi_auth.formatted_error_msg(session),
True)
return -1
# Get the Chassis data
brcdapi_log.log('Chassis Data\n------------', True)
for uri in _chassis_rest_data:
brcdapi_log.log('URI: ' + uri, True)
try:
obj = brcdapi_rest.get_request(session, uri)
if brcdapi_auth.is_error(
obj): # Set breakpoint here to inspect response
brcdapi_log.log(brcdapi_auth.formatted_error_msg(obj), True)
except BaseException as e:
brcdapi_log.exception(
['Error requesting ' + uri, 'Exception: ' + str(e)], True)
# Get the Switch data
for vf_id in fl:
brcdapi_log.log(
'Switch data. FID: ' + str(vf_id) + '\n---------------------',
True)
for buf in fid_rest_data:
brcdapi_log.log('URI: ' + buf, True)
try:
obj = brcdapi_rest.get_request(session, buf, vf_id)
if brcdapi_auth.is_error(
obj): # Set breakpoint here to inspect response
brcdapi_log.log(brcdapi_auth.formatted_error_msg(obj),
True)
except BaseException as e:
brcdapi_log.exception(
['Error requesting ' + buf, 'Exception: ' + str(e)], True)
# Logout
obj = brcdapi_rest.logout(session)
if brcdapi_auth.is_error(obj):
brcdapi_log.log(
'Logout failed:\n' + brcdapi_auth.formatted_error_msg(obj), True)
return -1
return 0
def default_port_config(session, fid, i_ports):
"""Disables and sets a list of FC ports to their factory default state
:param session: Session object returned from brcdapi.pyfos_auth.login()
:type session: dict
:param fid: Logical FID number for switch with ports. Use None if switch is not VF enabled.
:type fid: int
:param i_ports: List of ports in the API format of s/p. For a fixed port switch for example, port 12 is '0/12'
:type i_ports: tuple, list
:return: The object returned from the API. If ports is an empty list, a made up good status is returned.
:rtype: dict
"""
global default_port_config_d
ports = ports_to_list(i_ports)
if len(ports) == 0:
return brcdapi_util.GOOD_STATUS_OBJ
# Not all features are supported on all platforms. In most cases, even if you disable the unsupported feature, FOS
# returns an error. To get around this, I read the port configuration and only add parameters to send to the switch
# if they exist in the data returned from the switch
# Read in the port configurations
obj = brcdapi_rest.get_request(session, 'brocade-interface/fibrechannel',
fid)
if pyfos_auth.is_error(obj):
brcdapi_log.log(
'Failed to read brocade-interface/fibrechannel for fid ' +
str(fid), True)
return obj
# Put all the ports in a dictionary for easy lookup
port_d = dict()
for port in obj['fibrechannel']:
port_d.update({port['name']: port})
# Figure out what ports to change
pl = list()
for port in ports:
d = port_d.get(port)
if d is None:
brcdapi_log.exception('Port ' + port + ' not in FID ' + str(fid),
True)
continue
port_content = collections.OrderedDict(
) # This may not need to be ordered.
port_content['name'] = port
for k, v in default_port_config_d.items():
if k in d:
if k == 'speed':
if d.get('auto-negotiate'
) is not None and d['auto-negotiate'] == 0:
port_content[k] = 0
elif k == 'user-friendly-name':
l = port.split('/')
port_name = 'port' + l[1]
if l[0] != '0':
port_name = 'slot' + l[0] + ' ' + port_name
if 'user-friendly-name' in d:
if d['user-friendly-name'] != port_name:
port_content[k] = port_name
else:
port_content[k] = port_name
elif v != d[k]:
port_content[k] = v
if len(port_content.keys()) > 1:
pl.append(port_content)
# Now modify the port(s)
if len(pl) > 0:
return brcdapi_rest.send_request(session,
'brocade-interface/fibrechannel',
'PATCH', {'fibrechannel': pl}, fid)
else:
return brcdapi_util.GOOD_STATUS_OBJ
def pseudo_main():
"""Basically the main(). Did it this way to use with IDE
:return: Exit code
:rtype: int
"""
global _DEBUG
# Get the command line input
ml = ['WARNING!!! Debug is enabled'] if _DEBUG else list()
ip, user_id, pw, sec, fid_str, vd, log, nl = parse_args()
if vd:
brcdapi_rest.verbose_debug = True
if sec is None:
sec = 'none'
if not nl:
brcdapi_log.open_log(log)
ml.append('FID: ' + fid_str)
try:
fid = int(fid_str)
except ValueError:
brcdapi_log.log(
'Invalid FID, -f. FID must be an integer between 1-128')
brcdapi_log.log(ml, True)
# Login
session = brcdapi_rest.login(user_id, pw, ip, sec)
if brcdapi_auth.is_error(session):
brcdapi_log.log(
'Login failed:\n' + brcdapi_auth.formatted_error_msg(session),
True)
return -1
ec = 0 # Error code. 0: No errors. -1: error encountered
port_info_d = dict() # Will use this to store basic port information
port_stats_d = dict() # Will use this to store port statistics in
# You may want to put better error checking in your code as well as use a more efficient code. A verbose coding
# style was used here for readability.
try:
# Get the switch WWN
brcdapi_log.log('Capturing chassis Data', True)
uri = 'running/brocade-fibrechannel-logical-switch/fibrechannel-logical-switch'
obj = brcdapi_rest.get_request(session, uri)
if brcdapi_auth.is_error(obj):
brcdapi_log.log(brcdapi_auth.formatted_error_msg(obj), True)
ec = -1
else:
# Find the switch with the matching FID
switch_wwn = None
for switch_obj in obj['fibrechannel-logical-switch']:
if switch_obj['fabric-id'] == fid:
switch_wwn = switch_obj['switch-wwn']
break
if switch_wwn is None:
brcdapi_log.log(
'Logical switch for FID ' + str(fid) + 'not found', True)
ec = -1
# Get some basic port information
if ec == 0: # Make sure we didn't encountered any errors above
# It's common to keep track of other port information, such as the user friendly name and FC address. Below
# captures this basic port information.
brcdapi_log.log('Capturing basic port information.', True)
uri = 'running/brocade-interface/fibrechannel'
port_info = brcdapi_rest.get_request(session, uri, fid)
if brcdapi_auth.is_error(port_info):
brcdapi_log.log(brcdapi_auth.formatted_error_msg(port_info),
True)
ec = -1
else:
# To make it easier to match the port information with the port statistics, we're going to create a
# a dictionary using the port name (port number) as the key
for port_obj in port_info['fibrechannel']:
port_info_d.update({port_obj['name']: port_obj})
# Capture the port statistics
if ec == 0: # Make sure we didn't encountered any errors above
brcdapi_log.log('Capturing port statistics', True)
uri = 'running/brocade-interface/fibrechannel-statistics'
port_stats = brcdapi_rest.get_request(session, uri, fid)
if brcdapi_auth.is_error(port_stats):
brcdapi_log.log(brcdapi_auth.formatted_error_msg(port_stats),
True)
ec = -1
else:
# We could just add each port to the database here but since it's common to capture additional
# information, such as determining the login alias(es), we'll add it to a dictionary as was done with
# the basic port information
for port_obj in port_stats['fibrechannel-statistics']:
port_stats_d.update({port_obj['name']: port_obj})
# Add all the ports to the database
if ec == 0: # Make sure we didn't encountered any errors above
brcdapi_log.log('Adding key value pairs to the database.', True)
for port_num, port_obj in port_info_d.items():
sub_key = 'fcid-hex' # Just using the FC address for this example
_db_add(switch_wwn, port_num, sub_key, port_obj[sub_key])
for k, v in port_stats_d[port_num].items():
_db_add(switch_wwn, port_num, k, v)
except: # Bare because I don't care what went wrong. I just want to logout
# The brcdapi_log.exception() method precedes the passed message parameter with a stack trace
brcdapi_log.exception(
'Unknown programming error occured while processing: ' + uri, True)
# Logout
obj = brcdapi_rest.logout(session)
if brcdapi_auth.is_error(obj):
brcdapi_log.log(
'Logout failed:\n' + brcdapi_auth.formatted_error_msg(obj), True)
return -1
return 0
def pseudo_main():
"""Basically the main().
:return: Exit code
:rtype: int
"""
global _DEBUG
# Get and validate command line input
ml = ['WARNING!!! Debug is enabled'] if _DEBUG else list()
ip, user_id, pw, sec, fid_str, vd, log, nl = parse_args()
if not nl:
brcdapi_log.open_log(log)
if vd:
brcdapi_rest.verbose_debug = True
if fid_str.isdigit():
fid = int(fid_str)
else:
brcdapi_log.log('Invalid FID: ' + fid_str, True)
return -1
brcdapi_log.log(ml, True)
# Login
brcdapi_log.log('Attempting login', True)
session = brcdapi_rest.login(user_id, pw, ip, sec)
if brcdapi_auth.is_error(session):
brcdapi_log.log('Login failed', True)
brcdapi_log.log(brcdapi_auth.formatted_error_msg(session), True)
return -1
brcdapi_log.log('Login succeeded', True)
ec = 0
try: # I always do a try in code development so that if there is a code bug, I still log out.
# Get FC port list for this FID by reading the configurations
kpi = 'running/brocade-interface/fibrechannel'
obj = brcdapi_rest.get_request(session, kpi, fid)
if brcdapi_auth.is_error(obj):
brcdapi_log.log('Failed to read ' + kpi + ' for fid ' + str(fid),
True)
ec = -1
else:
fc_plist = [port.get('name') for port in obj.get('fibrechannel')]
pl = list()
content = {'fibrechannel': pl}
for p in fc_plist:
d = {
'name': p,
'user-friendly-name':
'port_' + p.replace('/', '_'), # Name port "port_s_p"
'los-tov-mode-enabled': 2 # Enable LOS_TOV
}
# For other port configuration parameters, search the Rest API Guide or Yang models for
# brocade-interface/fibrechannel
pl.append(d)
# PATCH only changes specified leaves in the content for this URI. It does not replace all resources
obj = brcdapi_rest.send_request(
session, 'running/brocade-interface/fibrechannel', 'PATCH',
content, fid)
if brcdapi_auth.is_error(obj):
brcdapi_log.log('Error configuring ports for FID ' + str(fid),
True)
brcdapi_log.log(brcdapi_auth.formatted_error_msg(obj), True)
ec = -1
else:
brcdapi_log.log(
'Successfully configured ports for FID ' + str(fid), True)
except: # Bare because I don't care what went wrong at this point. I just want to log out no matter what happens.
brcdapi_log.log('Encountered a programming error', True)
ec = -1
# Logout
obj = brcdapi_rest.logout(session)
if brcdapi_auth.is_error(obj):
brcdapi_log.log(
'Logout failed:\n' + brcdapi_auth.formatted_error_msg(obj), True)
return ec