예제 #1
0
    def startModeling(self,star,star_index):
        
        """ 
        Start the modeling process on a model star.
        
        @param star: The parameter set for this session
        @type star: Star()
        @param star_index: The index of the Star() object in the full list in 
                           CC. Only used to track earlier iterations if 
                           iterative==1
        @type star_index: int
        
        """
        
        #-- Note that db synchronisation is done every time a model is 
        #   successfully calculated, every time a previous code has been ran,
        #   and every time a change is made to the database, in terms of model
        #   id reservation. 
        
        for i in range(self.iterations):
            if self.mcmax: 
                print '***********************************'
                print '** Starting MCMax calculation.'
                print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
                #-- Check if the previously calculated GASTRoNOoM model was
                #   calculated. This means a lot of time has passed since
                #   the last synchronisation of the mcmax db, so sync it
                #Not needed anymore. Sync happens before db check
#                 if self.mline_done:
#                     self.mcmax_db.sync()
                #-- Initiate a dust session which is used for every iteration
                if i == 0: 
                    dust_session = MCMax(path_mcmax=self.path_mcmax,\
                                         db=self.mcmax_db,\
                                         new_entries=self.new_entries_mcmax,\
                                         replace_db_entry=self.replace_db_entry,\
                                         single_session=self.single_session)
                self.mcmax_done = False
                dust_session.doMCMax(star)
                if dust_session.mcmax_done: 
                    self.mcmax_done = True
                    
                #-- In case a cooling model was in progress, wait until 
                #   finished. 
                while dust_session.in_progress:
                    self.mcmax_db.sync()
                    if not self.mcmax_db.has_key(dust_session.model_id):
                        print 'MCMax model calculation failed.'
                        dust_session.model_id = ''
                        break
                    elif not self.mcmax_db[dust_session.model_id]\
                            .has_key('IN_PROGRESS'):
                        print 'MCMax model calculation finished.'
                        break
                    print 'MCMax still running in another CC session.'+\
                          'Waiting 1 minute before checking again.'
                    try:
                        time.sleep(60)
                    except KeyboardInterrupt:
                        print 'Ending wait time, continuing with ' + \
                              'progress check immediately.'
                dust_session.in_progress = False
                            
                #-- add/change 'LAST_MCMAX_MODEL' entry. Only do this if model
                #   was calculated successfully. In case of a failure, you want
                #   to keep the model id of a previous iteration if available.
                if dust_session.model_id:
                    star['LAST_MCMAX_MODEL'] = dust_session.model_id

                #-- If last iteration, ray trace.
                if i+1 == self.iterations or self.iterative:
                    dust_session.rayTrace(star)
                     
                #-- Remember every iteration if iterative==True.
                if self.iterative:
                    self.star_grid_old[star_index].append(star.copy())
                
                #-- add/change MUTABLE input keys, which MAY be overwritten by
                #   the input file inputComboCode.dat
                #   Only relevant if a model match was found/calculated.
                if dust_session.model_id:
                    star.removeMutableMCMax(dust_session.mutable,self.var_pars)
                    star.update(self.input_dict)
                    if self.replace_db_entry:
                        self.new_entries_mcmax.append(dust_session.model_id)
                
            if self.gastronoom:    
                #- Initiate a gas session which is used for every iteration
                if i == 0: 
                    gas_session = Gastronoom(vic=self.vic,\
                                        path_gastronoom=self.path_gastronoom,\
                                        cool_db=self.cool_db,\
                                        ml_db=self.ml_db,\
                                        sph_db=self.sph_db,\
                                        sphinx=self.sphinx,\
                                        skip_cooling=self.skip_cooling,\
                                        replace_db_entry=self.replace_db_entry,\
                                        new_entries=self.new_entries_cooling,\
                                        recover_sphinxfiles=self.recover_sphinxfiles,\
                                        single_session=self.single_session)
                    self.mline_done = False
                #if self.mcmax_done:
                    #-- MCMax was ran successfully, in other words, quite a bit 
                    #   of time has passed, so update the cool database.
                    #self.cool_db.sync()
                    #Not needed anymore. Sync happens before db check
                    
                #-- If last iteration and no mline is requested, don't run 
                #   cooling. There is no point anyway (and means you don't have 
                #   to wait for your MCMax model. 
                if (i+1 == self.iterations) and not star['GAS_LIST']:
                    continue
                
                print '***********************************'
                print '** Starting GASTRoNOoM calculation.'
                print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
                                
                #-- Otherwise, run cooling and do the rest of the loop
                gas_session.doGastronoom(star)
                
                #-- In case a cooling model was in progress, wait until 
                #   finished. 
                while gas_session.in_progress:
                    self.cool_db.sync()
                    if not self.cool_db.has_key(gas_session.model_id):
                        print 'Cooling model calculation failed.'
                        gas_session.model_id = ''
                        break
                    elif not self.cool_db[gas_session.model_id]\
                            .has_key('IN_PROGRESS'):
                        print 'Cooling model calculation finished.'
                        break
                    print 'Cooling still running in another CC session.'+\
                          'Waiting 1 minute before checking again.'
                    try:
                        time.sleep(60)
                    except KeyboardInterrupt:
                        print 'Ending wait time, continuing with ' + \
                              'progress check immediately.'
                gas_session.in_progress = False
                
                #-- add/change 'LAST_GASTRONOOM_MODEL' entry. Only do this if 
                #   model was calculated successfully. In case of a failure, you
                #   wantto keep the model id of a previous iteration if 
                #   available.
                if gas_session.model_id:
                    star['LAST_GASTRONOOM_MODEL'] = gas_session.model_id

                #- add/change MUTABLE input keys, which MAY be overwritten by 
                #- the input file inputComboCode.dat
                star.removeMutableGastronoom(gas_session.mutable,self.var_pars)
                star.update(self.input_dict)
                star.updateMolecules(parlist=gas_session.mutable)
                
                #-- Remember the new model_ids if the replace_db_entry option 
                #   is on. 
                if self.replace_db_entry:
                    self.new_entries_cooling.append(gas_session.model_id)
                
                #-- If last iteration, run mline and sphinx. Note that the 
                #   model_id cannot have changed: it's either the original 
                #   cooling model_id or no model_id at all in case of total fail
                if (i+1 == self.iterations) and gas_session.model_id: 
                    #-- Only sync db if a cooling model was calced just before.
                    #   Not needed anymore sync happens before db check.
                    #if gas_session.cool_done: self.ml_db.sync()
                    gas_session.doMline(star)
                    if gas_session.mline_done: self.mline_done = True
                    
                    #-- Now check if molecules still in progress have finished
                    while gas_session.molec_in_progress:
                        self.ml_db.sync()
                        still_in_progress = []
                        for molec in gas_session.molec_in_progress:
                            cid = gas_session.model_id
                            mid = molec.getModelId()
                            md = self.ml_db[cid]
                            mstr = molec.molecule
                            #-- Check if molec id or molecule itself exists in 
                            #   db. Id may also have been removed, in case all
                            #   molecules failed. 
                            if not md.has_key(mid) or not md[mid].has_key(mstr):
                                print 'Mline model calculation failed.'
                                molec.setModelId('')
                            elif not md[mid][mstr].has_key('IN_PROGRESS'):
                                print 'Mline model calculation finished for '+\
                                      '%s.'%mstr
                            else:
                                print 'Mline still running in another CC '+\
                                      'session for %s. '%mstr
                                still_in_progress.append(molec)
                        if not still_in_progress: 
                            mls = set([molec.getModelId() 
                                       for molec in gas_session.molec_list])
                            if mls == set(['']):  
                                #- no mline models calculated: stop GASTRoNOoM
                                gas_session.model_id = ''
                                print 'Mline model calculation failed for ' + \
                                      'all requested molecules. Stopping ' + \
                                      'GASTRoNOoM here!'
                            break
                        gas_session.molec_in_progress = still_in_progress                                
                        print 'Waiting 1 minute before checking again.'
                        try:
                            time.sleep(60)
                        except KeyboardInterrupt:
                            print 'Ending wait time, continuing with ' + \
                                  'progress check immediately.'
                    
                    #-- Check if the model id is still valid after the mline run
                    if gas_session.model_id:
                        #-- Only sync the db if an mline model was calculated 
                        #   just before. Sync now always happens before db check
                        #if self.mline_done: self.sph_db.sync()
                        gas_session.doSphinx(star)
                print '***********************************'
        
        #- remember trans bools if sphinx is enabled, so you can trace which 
        #- models have been calculated in this session and which were retrieved 
        #- from database. Also remember if mline was required to be ran this 
        #- session, or rather if everything was taken out of the db
        if self.gastronoom:
            self.mline_done_list.append(self.mline_done)
            if self.sphinx: 
                self.trans_bool_list.append(gas_session.trans_bools)
        
        #- remember if mcmax was ran, or rather the model taken from the db.
        #- In first or second iteration, doesn't matter.
        if self.mcmax: 
            self.mcmax_done_list.append(self.mcmax_done)
        
        #- old MCMax models are kept if iterative is requested. Before every
        #- change the model is saved to the logging list of models. In practice, 
        #- there will be lists in star_grid_old of Star models, in which every 
        #- model is the next step in the iteration, regardless of a mcmax or 
        #- gastronoom run. When plotting, each of these lists will be plotted 
        #- together showing the evolution of the modeling session for this 
        #- parameter set.
                
예제 #2
0
 def startModeling(self,star,star_index):
     
     """ 
     Start the modeling process on a model star.
     
     @param star: The parameter set for this session
     @type star: Star()
     @param star_index: The index of the Star() object in the full list in 
                        CC. Only used to track earlier iterations if 
                        iterative==1
     @type star_index: int
     
     """
     
     #-- Note that db synchronisation is done every time a model is 
     #   successfully calculated, every time a previous code has been ran,
     #   and every time a change is made to the database, in terms of model
     #   id reservation. 
     
     for i in range(self.iterations):
         if self.mcmax: 
             print '***********************************'
             print '** Starting MCMax calculation.'
             print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
             #-- Check if the previously calculated GASTRoNOoM model was
             #   calculated. This means a lot of time has passed since
             #   the last synchronisation of the mcmax db, so sync it
             if self.mline_done:
                 self.mcmax_db.sync()
             #-- Initiate a dust session which is used for every iteration
             if i == 0: 
                 dust_session = MCMax(path_mcmax=self.path_mcmax,\
                                      db=self.mcmax_db,\
                                      new_entries=self.new_entries_mcmax,\
                                      replace_db_entry=self.replace_db_entry)
             self.mcmax_done = False
             dust_session.doMCMax(star)
             if dust_session.mcmax_done: 
                 self.mcmax_done = True
             
             #- If last iteration, ray trace.
             if i+1 == self.iterations or self.iterative:
                 dust_session.rayTrace(star)
                  
             #- Remember every iteration if iterative==True.
             if self.iterative:
                 self.star_grid_old[star_index].append(star.copy())
             
             #- add/change MUTABLE input keys, which MAY be overwritten by
             #- the input file inputComboCode.dat
             #- Only relevant if a model match was found/calculated.
             if dust_session.model_id:
                 star.removeMutableMCMax(dust_session.mutable,self.var_pars)
                 star.update(self.input_dict)
                 if self.replace_db_entry:
                     self.new_entries_mcmax.append(dust_session.model_id)
             
         if self.gastronoom:    
             #- Initiate a gas session which is used for every iteration
             if i == 0: 
                 gas_session = Gastronoom(vic=self.vic,\
                                     path_gastronoom=self.path_gastronoom,\
                                     cool_db=self.cool_db,\
                                     ml_db=self.ml_db,\
                                     sph_db=self.sph_db,\
                                     sphinx=self.sphinx,\
                                     skip_cooling=self.skip_cooling,\
                                     replace_db_entry=self.replace_db_entry,\
                                     new_entries=self.new_entries_cooling,\
                                     recover_sphinxfiles=self.recover_sphinxfiles)
                 self.mline_done = False
             if self.mcmax_done:
                 #-- MCMax was ran successfully, in other words, quite a bit 
                 #   of time has passed, so update the cool database.
                 self.cool_db.sync()
             
             #-- If last iteration and no mline is requested, don't run 
             #   cooling. There is no point anyway (and means you don't have 
             #   to wait for your MCMax model. 
             if (i+1 == self.iterations) and not star['GAS_LIST']:
                 continue
             
             print '***********************************'
             print '** Starting GASTRoNOoM calculation.'
             print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
                             
             #-- Otherwise, run cooling and do the rest of the loop
             gas_session.doGastronoom(star)
             
             #- add/change MUTABLE input keys, which MAY be overwritten by 
             #- the input file inputComboCode.dat
             star.removeMutableGastronoom(gas_session.mutable,self.var_pars)
             star.update(self.input_dict)
             star.updateMolecules(parlist=gas_session.mutable)
             
             #-- Remember the new model_ids if the replace_db_entry option 
             #   is on. 
             if self.replace_db_entry:
                 self.new_entries_cooling.append(gas_session.model_id)
             
             #- If last iteration, run mline and sphinx. Note that the 
             #- model_id cannot have changed: it's either the original 
             #- cooling model_id or no model_id at all in case of total fail
             if (i+1 == self.iterations) and gas_session.model_id: 
                 if gas_session.cool_done:
                     self.ml_db.sync()
                 gas_session.doMline(star)
                 if gas_session.mline_done:
                     self.mline_done = True
                 #- Check if the model id is still valid after the mline run
                 if gas_session.model_id:
                     gas_session.doSphinx(star)
             print '***********************************'
     
     #- remember trans bools if sphinx is enabled, so you can trace which 
     #- models have been calculated in this session and which were retrieved 
     #- from database. Also remember if mline was required to be ran this 
     #- session, or rather if everything was taken out of the db
     if self.gastronoom:
         self.mline_done_list.append(self.mline_done)
         if self.sphinx: 
             self.trans_bool_list.append(gas_session.trans_bools)
     
     #- remember if mcmax was ran, or rather the model taken from the db.
     #- In first or second iteration, doesn't matter.
     if self.mcmax: 
         self.mcmax_done_list.append(self.mcmax_done)
     
     #- old MCMax models are kept if iterative is requested. Before every
     #- change the model is saved to the logging list of models. In practice, 
     #- there will be lists in star_grid_old of Star models, in which every 
     #- model is the next step in the iteration, regardless of a mcmax or 
     #- gastronoom run. When plotting, each of these lists will be plotted 
     #- together showing the evolution of the modeling session for this 
     #- parameter set.
             
예제 #3
0
    def startModeling(self,star,star_index):
        
        """ 
        Start the modeling process on a model star.
        
        @param star: The parameter set for this session
        @type star: Star()
        @param star_index: The index of the Star() object in the full list in 
                           CC. Only used to track earlier iterations if 
                           iterative==1
        @type star_index: int
        
        """
        
        #-- Note that db synchronisation is done every time a model is 
        #   successfully calculated, every time a previous code has been ran,
        #   and every time a change is made to the database, in terms of model
        #   id reservation. 
        
        for i in range(self.iterations):
            if self.mcmax: 
                print '***********************************'
                print '** Starting MCMax calculation.'
                print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
                #-- Check if the previously calculated GASTRoNOoM model was
                #   calculated. This means a lot of time has passed since
                #   the last synchronisation of the mcmax db, so sync it
                #Not needed anymore. Sync happens before db check
#                 if self.mline_done:
#                     self.mcmax_db.sync()
                #-- Initiate a dust session which is used for every iteration
                if i == 0: 
                    dust_session = MCMax(path_mcmax=self.path_mcmax,\
                                         db=self.mcmax_db,\
                                         new_entries=self.new_entries_mcmax,\
                                         replace_db_entry=self.replace_db_entry,\
                                         single_session=self.single_session)
                self.mcmax_done = False
                dust_session.doMCMax(star)
                if dust_session.mcmax_done: 
                    self.mcmax_done = True
                    
                #-- In case a cooling model was in progress, wait until 
                #   finished. 
                while dust_session.in_progress:
                    self.mcmax_db.sync()
                    if not self.mcmax_db.has_key(dust_session.model_id):
                        print 'MCMax model calculation failed.'
                        dust_session.model_id = ''
                        break
                    elif not self.mcmax_db[dust_session.model_id]\
                            .has_key('IN_PROGRESS'):
                        print 'MCMax model calculation finished.'
                        break
                    print 'MCMax still running in another CC session.'+\
                          'Waiting 1 minute before checking again.'
                    try:
                        time.sleep(60)
                    except KeyboardInterrupt:
                        print 'Ending wait time, continuing with ' + \
                              'progress check immediately.'
                dust_session.in_progress = False
                            
                #-- add/change 'LAST_MCMAX_MODEL' entry. Only do this if model
                #   was calculated successfully. In case of a failure, you want
                #   to keep the model id of a previous iteration if available.
                if dust_session.model_id:
                    star['LAST_MCMAX_MODEL'] = dust_session.model_id

                #-- If last iteration, ray trace.
                if i+1 == self.iterations or self.iterative:
                    dust_session.rayTrace(star)
                     
                #-- Remember every iteration if iterative==True.
                if self.iterative:
                    self.star_grid_old[star_index].append(star.copy())
                
                #-- add/change MUTABLE input keys, which MAY be overwritten by
                #   the input file inputComboCode.dat
                #   Only relevant if a model match was found/calculated.
                if dust_session.model_id:
                    star.removeMutableMCMax(dust_session.mutable,self.var_pars)
                    star.update(self.input_dict)
                    if self.replace_db_entry:
                        self.new_entries_mcmax.append(dust_session.model_id)
                
            if self.gastronoom:    
                #- Initiate a gas session which is used for every iteration
                if i == 0: 
                    gas_session = Gastronoom(vic=self.vic,\
                                        path_gastronoom=self.path_gastronoom,\
                                        cool_db=self.cool_db,\
                                        ml_db=self.ml_db,\
                                        sph_db=self.sph_db,\
                                        sphinx=self.sphinx,\
                                        skip_cooling=self.skip_cooling,\
                                        replace_db_entry=self.replace_db_entry,\
                                        new_entries=self.new_entries_cooling,\
                                        recover_sphinxfiles=self.recover_sphinxfiles,\
                                        single_session=self.single_session)
                    self.mline_done = False
                #if self.mcmax_done:
                    #-- MCMax was ran successfully, in other words, quite a bit 
                    #   of time has passed, so update the cool database.
                    #self.cool_db.sync()
                    #Not needed anymore. Sync happens before db check
                    
                #-- If last iteration and no mline is requested, don't run 
                #   cooling. There is no point anyway (and means you don't have 
                #   to wait for your MCMax model. 
                if (i+1 == self.iterations) and not star['GAS_LIST']:
                    continue
                
                print '***********************************'
                print '** Starting GASTRoNOoM calculation.'
                print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
                                
                #-- Otherwise, run cooling and do the rest of the loop
                gas_session.doGastronoom(star)
                
                #-- In case a cooling model was in progress, wait until 
                #   finished. 
                while gas_session.in_progress:
                    self.cool_db.sync()
                    if not self.cool_db.has_key(gas_session.model_id):
                        print 'Cooling model calculation failed.'
                        gas_session.model_id = ''
                        break
                    elif not self.cool_db[gas_session.model_id]\
                            .has_key('IN_PROGRESS'):
                        print 'Cooling model calculation finished.'
                        break
                    print 'Cooling still running in another CC session.'+\
                          'Waiting 1 minute before checking again.'
                    try:
                        time.sleep(60)
                    except KeyboardInterrupt:
                        print 'Ending wait time, continuing with ' + \
                              'progress check immediately.'
                gas_session.in_progress = False
                
                #-- add/change 'LAST_GASTRONOOM_MODEL' entry. Only do this if 
                #   model was calculated successfully. In case of a failure, you
                #   wantto keep the model id of a previous iteration if 
                #   available.
                if gas_session.model_id:
                    star['LAST_GASTRONOOM_MODEL'] = gas_session.model_id

                #- add/change MUTABLE input keys, which MAY be overwritten by 
                #- the input file inputComboCode.dat
                star.removeMutableGastronoom(gas_session.mutable,self.var_pars)
                star.update(self.input_dict)
                star.updateMolecules(parlist=gas_session.mutable)
                
                #-- Remember the new model_ids if the replace_db_entry option 
                #   is on. 
                if self.replace_db_entry:
                    self.new_entries_cooling.append(gas_session.model_id)
                
                #-- If last iteration, run mline and sphinx. Note that the 
                #   model_id cannot have changed: it's either the original 
                #   cooling model_id or no model_id at all in case of total fail
                if (i+1 == self.iterations) and gas_session.model_id: 
                    #-- Only sync db if a cooling model was calced just before.
                    #   Not needed anymore sync happens before db check.
                    #if gas_session.cool_done: self.ml_db.sync()
                    gas_session.doMline(star)
                    if gas_session.mline_done: self.mline_done = True
                    
                    #-- Now check if molecules still in progress have finished
                    while gas_session.molec_in_progress:
                        self.ml_db.sync()
                        still_in_progress = []
                        for molec in gas_session.molec_in_progress:
                            cid = gas_session.model_id
                            mid = molec.getModelId()
                            md = self.ml_db[cid]
                            mstr = molec.molecule
                            #-- Check if molec id or molecule itself exists in 
                            #   db. Id may also have been removed, in case all
                            #   molecules failed. 
                            if not md.has_key(mid) or not md[mid].has_key(mstr):
                                print 'Mline model calculation failed.'
                                molec.setModelId('')
                            elif not md[mid][mstr].has_key('IN_PROGRESS'):
                                print 'Mline model calculation finished for '+\
                                      '%s.'%mstr
                            else:
                                print 'Mline still running in another CC '+\
                                      'session for %s. '%mstr
                                still_in_progress.append(molec)
                        if not still_in_progress: 
                            mls = set([molec.getModelId() 
                                       for molec in gas_session.molec_list])
                            if mls == set(['']):  
                                #- no mline models calculated: stop GASTRoNOoM
                                gas_session.model_id = ''
                                print 'Mline model calculation failed for ' + \
                                      'all requested molecules. Stopping ' + \
                                      'GASTRoNOoM here!'
                            break
                        gas_session.molec_in_progress = still_in_progress                                
                        print 'Waiting 1 minute before checking again.'
                        try:
                            time.sleep(60)
                        except KeyboardInterrupt:
                            print 'Ending wait time, continuing with ' + \
                                  'progress check immediately.'
                    
                    #-- Check if the model id is still valid after the mline run
                    if gas_session.model_id:
                        #-- Only sync the db if an mline model was calculated 
                        #   just before. Sync now always happens before db check
                        #if self.mline_done: self.sph_db.sync()
                        gas_session.doSphinx(star)
                print '***********************************'
        
        #- remember trans bools if sphinx is enabled, so you can trace which 
        #- models have been calculated in this session and which were retrieved 
        #- from database. Also remember if mline was required to be ran this 
        #- session, or rather if everything was taken out of the db
        if self.gastronoom:
            self.mline_done_list.append(self.mline_done)
            if self.sphinx: 
                self.trans_bool_list.append(gas_session.trans_bools)
        
        #- remember if mcmax was ran, or rather the model taken from the db.
        #- In first or second iteration, doesn't matter.
        if self.mcmax: 
            self.mcmax_done_list.append(self.mcmax_done)
예제 #4
0
 def startModeling(self,star,star_index):
     
     """ 
     Start the modeling process on a model star.
     
     @param star: The parameter set for this session
     @type star: Star()
     @param star_index: The index of the Star() object in the full list in 
                        CC. Only used to track earlier iterations if 
                        iterative==1
     @type star_index: int
     
     """
     
     #-- Note that db synchronisation is done every time a model is 
     #   successfully calculated, every time a previous code has been ran,
     #   and every time a change is made to the database, in terms of model
     #   id reservation. 
     
     for i in range(self.iterations):
         if self.mcmax: 
             print '***********************************'
             print '** Starting MCMax calculation.'
             print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
             #-- Check if the previously calculated GASTRoNOoM model was
             #   calculated. This means a lot of time has passed since
             #   the last synchronisation of the mcmax db, so sync it
             if self.mline_done:
                 self.mcmax_db.sync()
             #-- Initiate a dust session which is used for every iteration
             if i == 0: 
                 dust_session = MCMax(path_mcmax=self.path_mcmax,\
                                      db=self.mcmax_db,\
                                      new_entries=self.new_entries_mcmax,\
                                      replace_db_entry=self.replace_db_entry)
             self.mcmax_done = False
             dust_session.doMCMax(star)
             if dust_session.mcmax_done: 
                 self.mcmax_done = True
             
             #- If last iteration, ray trace.
             if i+1 == self.iterations or self.iterative:
                 dust_session.rayTrace(star)
                  
             #- Remember every iteration if iterative==True.
             if self.iterative:
                 self.star_grid_old[star_index].append(star.copy())
             
             #- add/change MUTABLE input keys, which MAY be overwritten by
             #- the input file inputComboCode.dat
             #- Only relevant if a model match was found/calculated.
             if dust_session.model_id:
                 star.removeMutableMCMax(dust_session.mutable,self.var_pars)
                 star.update(self.input_dict)
                 if self.replace_db_entry:
                     self.new_entries_mcmax.append(dust_session.model_id)
             
         if self.gastronoom:    
             #- Initiate a gas session which is used for every iteration
             if i == 0: 
                 gas_session = Gastronoom(vic=self.vic,\
                                     path_gastronoom=self.path_gastronoom,\
                                     cool_db=self.cool_db,\
                                     ml_db=self.ml_db,\
                                     sph_db=self.sph_db,\
                                     sphinx=self.sphinx,\
                                     skip_cooling=self.skip_cooling,\
                                     replace_db_entry=self.replace_db_entry,\
                                     new_entries=self.new_entries_cooling,\
                                     recover_sphinxfiles=self.recover_sphinxfiles)
                 self.mline_done = False
             if self.mcmax_done:
                 #-- MCMax was ran successfully, in other words, quite a bit 
                 #   of time has passed, so update the cool database.
                 self.cool_db.sync()
             
             #-- If last iteration and no mline is requested, don't run 
             #   cooling. There is no point anyway (and means you don't have 
             #   to wait for your MCMax model. 
             if (i+1 == self.iterations) and not star['GAS_LIST']:
                 continue
             
             print '***********************************'
             print '** Starting GASTRoNOoM calculation.'
             print '** Iteration # %i for Model %i.'%(i+1,star_index+1)
                             
             #-- Otherwise, run cooling and do the rest of the loop
             gas_session.doGastronoom(star)
             
             #- add/change MUTABLE input keys, which MAY be overwritten by 
             #- the input file inputComboCode.dat
             star.removeMutableGastronoom(gas_session.mutable,self.var_pars)
             star.update(self.input_dict)
             star.updateMolecules(parlist=gas_session.mutable)
             
             #-- Remember the new model_ids if the replace_db_entry option 
             #   is on. 
             if self.replace_db_entry:
                 self.new_entries_cooling.append(gas_session.model_id)
             
             #- If last iteration, run mline and sphinx. Note that the 
             #- model_id cannot have changed: it's either the original 
             #- cooling model_id or no model_id at all in case of total fail
             if (i+1 == self.iterations) and gas_session.model_id: 
                 if gas_session.cool_done:
                     self.ml_db.sync()
                 gas_session.doMline(star)
                 if gas_session.mline_done:
                     self.mline_done = True
                 #- Check if the model id is still valid after the mline run
                 if gas_session.model_id:
                     gas_session.doSphinx(star)
             print '***********************************'
     
     #- remember trans bools if sphinx is enabled, so you can trace which 
     #- models have been calculated in this session and which were retrieved 
     #- from database. Also remember if mline was required to be ran this 
     #- session, or rather if everything was taken out of the db
     if self.gastronoom:
         self.mline_done_list.append(self.mline_done)
         if self.sphinx: 
             self.trans_bool_list.append(gas_session.trans_bools)
     
     #- remember if mcmax was ran, or rather the model taken from the db.
     #- In first or second iteration, doesn't matter.
     if self.mcmax: 
         self.mcmax_done_list.append(self.mcmax_done)