예제 #1
0
        def finalize(self):
            log.debug("returnList: %s"% self.returnList)
            log.debug("createdList: %s"% self.createdList)   
            buffer = [] #self.i_module.templateNull.templateStarterData
            log.debug("starting data: %s"% buffer)
            
            #Make sure we have enough points
            #==============  
            handles = self.i_module.templateNull.handles
            if len(self.returnList) < handles:
                log.warning("Creating curve to get enough points")                
                curve = curves.curveFromPosList(self.returnList)
                mc.rebuildCurve (curve, ch=0, rpo=1, rt=0, end=1, kr=0, kcp=0, kep=1, kt=0,s=(handles-1), d=1, tol=0.001)
                self.returnList = curves.returnCVsPosList(curve)#Get the pos of the cv's
                mc.delete(curve)

            #Store info
            #==============                  
            for i,p in enumerate(self.returnList):
                buffer.append(p)#need to ensure it's storing properly
                #log.info('[%s,%s]'%(buffer[i],p))
                
            #Store locs
            #==============  
            log.debug("finish data: %s"% buffer)
            self.templateNull.__setattr__('templateStarterData',buffer,lock=True)
            #self.i_module.templateNull.templateStarterData = buffer#store it
            log.info("'%s' sized!"%self.i_module.getShortName())
            dragFactory.clickMesh.finalize(self)
예제 #2
0
        def finalize(self):
            log.debug("returnList: %s" % self.returnList)
            log.debug("createdList: %s" % self.createdList)
            buffer = []  #self.i_module.templateNull.templateStarterData
            log.debug("starting data: %s" % buffer)

            #Make sure we have enough points
            #==============
            handles = self.i_module.templateNull.handles
            if len(self.returnList) < handles:
                log.warning("Creating curve to get enough points")
                curve = curves.curveFromPosList(self.returnList)
                mc.rebuildCurve(curve,
                                ch=0,
                                rpo=1,
                                rt=0,
                                end=1,
                                kr=0,
                                kcp=0,
                                kep=1,
                                kt=0,
                                s=(handles - 1),
                                d=1,
                                tol=0.001)
                self.returnList = curves.returnCVsPosList(
                    curve)  #Get the pos of the cv's
                mc.delete(curve)

            #Store info
            #==============
            for i, p in enumerate(self.returnList):
                buffer.append(p)  #need to ensure it's storing properly
                #log.info('[%s,%s]'%(buffer[i],p))

            #Store locs
            #==============
            log.debug("finish data: %s" % buffer)
            self.templateNull.__setattr__('templateStarterData',
                                          buffer,
                                          lock=True)
            #self.i_module.templateNull.templateStarterData = buffer#store it
            log.info("'%s' sized!" % self.i_module.getShortName())
            dragFactory.clickMesh.finalize(self)
예제 #3
0
def doSize(self,sizeMode='normal',geo = [],posList = [],*args,**kws):
    """
    Size a module
    1) Determine what points we need to gather
    2) Initiate draggerContextFactory
    3) Prompt user per point
    4) at the end of the day have a pos list the length of the handle list
    
    @ sizeMode
    'all' - pick every handle position
    'normal' - first/last, if child, will use last position of parent as first
    'manual' - provide a pos list to size from
    
    TODO:
    Add option for other modes
    Add geo argument that can be passed for speed
    Add clamp on value
    Add a way to pull size info from a mirror module
    """
    log.debug(">>> doSize")    
    
    clickMode = {"heel":"surface"}    
    
    #Gather info
    #==============      
    handles = self.templateNull.handles
    if len(self.i_coreNames.value) == handles:
        names = self.i_coreNames.value
    else:
        log.warning("Not enough names. Generating")
        names = getGeneratedCoreNames(self)
    
    if not geo:
        geo = self.modulePuppet.getGeo()
    log.debug("Handles: %s"%handles)
    log.debug("Names: %s"%names)
    log.debug("Puppet: %s"%self.getMessage('modulePuppet'))
    log.debug("Geo: %s"%geo)
    log.debug("sizeMode: %s"%sizeMode)
    
    i_module = self #Bridge holder for our module class to go into our sizer class
    
    #Variables
    #============== 
    if sizeMode == 'manual':#To allow for a pos list to be input
        if not posList:
            log.error("Must have posList arg with 'manual' sizeMode!")
            return False
        
        if len(posList) < handles:
            log.warning("Creating curve to get enough points")                
            curve = curves.curveFromPosList(posList)
            mc.rebuildCurve (curve, ch=0, rpo=1, rt=0, end=1, kr=0, kcp=0, kep=1, kt=0,s=(handles-1), d=1, tol=0.001)
            posList = curves.returnCVsPosList(curve)#Get the pos of the cv's
            mc.delete(curve) 
            
        self.templateNull.__setattr__('templateStarterData',posList,lock=True)
        log.info("'%s' manually sized!"%self.getShortName())
        return True
            
    elif sizeMode == 'normal':
        if names > 1:
            namesToCreate = names[0],names[-1]
        else:
            namesToCreate = names
        log.debug("Names: %s"%names)
    else:
        namesToCreate = names        
        sizeMode = 'all'
       
    class moduleSizer(dragFactory.clickMesh):
        """Sublass to get the functs we need in there"""
        def __init__(self,i_module = i_module,**kws):
            log.debug(">>> moduleSizer.__init__")    
            if kws:log.debug("kws: %s"%str(kws))
            
            super(moduleSizer, self).__init__(**kws)
            self.i_module = i_module
            log.info("Please place '%s'"%self.toCreate[0])
            
        def release(self):
            if len(self.returnList)< len(self.toCreate)-1:#If we have a prompt left
                log.info("Please place '%s'"%self.toCreate[len(self.returnList)+1])            
            dragFactory.clickMesh.release(self)

            
        def finalize(self):
            log.debug("returnList: %s"% self.returnList)
            log.debug("createdList: %s"% self.createdList)   
            buffer = [] #self.i_module.templateNull.templateStarterData
            log.debug("starting data: %s"% buffer)
            
            #Make sure we have enough points
            #==============  
            handles = self.i_module.templateNull.handles
            if len(self.returnList) < handles:
                log.warning("Creating curve to get enough points")                
                curve = curves.curveFromPosList(self.returnList)
                mc.rebuildCurve (curve, ch=0, rpo=1, rt=0, end=1, kr=0, kcp=0, kep=1, kt=0,s=(handles-1), d=1, tol=0.001)
                self.returnList = curves.returnCVsPosList(curve)#Get the pos of the cv's
                mc.delete(curve)

            #Store info
            #==============                  
            for i,p in enumerate(self.returnList):
                buffer.append(p)#need to ensure it's storing properly
                #log.info('[%s,%s]'%(buffer[i],p))
                
            #Store locs
            #==============  
            log.debug("finish data: %s"% buffer)
            self.templateNull.__setattr__('templateStarterData',buffer,lock=True)
            #self.i_module.templateNull.templateStarterData = buffer#store it
            log.info("'%s' sized!"%self.i_module.getShortName())
            dragFactory.clickMesh.finalize(self)
        
    #Start up our sizer    
    return moduleSizer(mode = 'midPoint',
                       mesh = geo,
                       create = 'locator',
                       toCreate = namesToCreate)
예제 #4
0
def doSize(self, sizeMode='normal', geo=[], posList=[], *args, **kws):
    """
    Size a module
    1) Determine what points we need to gather
    2) Initiate draggerContextFactory
    3) Prompt user per point
    4) at the end of the day have a pos list the length of the handle list
    
    @ sizeMode
    'all' - pick every handle position
    'normal' - first/last, if child, will use last position of parent as first
    'manual' - provide a pos list to size from
    
    TODO:
    Add option for other modes
    Add geo argument that can be passed for speed
    Add clamp on value
    Add a way to pull size info from a mirror module
    """
    log.debug(">>> doSize")

    clickMode = {"heel": "surface"}

    #Gather info
    #==============
    handles = self.templateNull.handles
    if len(self.i_coreNames.value) == handles:
        names = self.i_coreNames.value
    else:
        log.warning("Not enough names. Generating")
        names = getGeneratedCoreNames(self)

    if not geo:
        geo = self.modulePuppet.getGeo()
    log.debug("Handles: %s" % handles)
    log.debug("Names: %s" % names)
    log.debug("Puppet: %s" % self.getMessage('modulePuppet'))
    log.debug("Geo: %s" % geo)
    log.debug("sizeMode: %s" % sizeMode)

    i_module = self  #Bridge holder for our module class to go into our sizer class

    #Variables
    #==============
    if sizeMode == 'manual':  #To allow for a pos list to be input
        if not posList:
            log.error("Must have posList arg with 'manual' sizeMode!")
            return False

        if len(posList) < handles:
            log.warning("Creating curve to get enough points")
            curve = curves.curveFromPosList(posList)
            mc.rebuildCurve(curve,
                            ch=0,
                            rpo=1,
                            rt=0,
                            end=1,
                            kr=0,
                            kcp=0,
                            kep=1,
                            kt=0,
                            s=(handles - 1),
                            d=1,
                            tol=0.001)
            posList = curves.returnCVsPosList(curve)  #Get the pos of the cv's
            mc.delete(curve)

        self.templateNull.__setattr__('templateStarterData',
                                      posList,
                                      lock=True)
        log.info("'%s' manually sized!" % self.getShortName())
        return True

    elif sizeMode == 'normal':
        if names > 1:
            namesToCreate = names[0], names[-1]
        else:
            namesToCreate = names
        log.debug("Names: %s" % names)
    else:
        namesToCreate = names
        sizeMode = 'all'

    class moduleSizer(dragFactory.clickMesh):
        """Sublass to get the functs we need in there"""
        def __init__(self, i_module=i_module, **kws):
            log.debug(">>> moduleSizer.__init__")
            if kws: log.debug("kws: %s" % str(kws))

            super(moduleSizer, self).__init__(**kws)
            self.i_module = i_module
            log.info("Please place '%s'" % self.toCreate[0])

        def release(self):
            if len(self.returnList) < len(
                    self.toCreate) - 1:  #If we have a prompt left
                log.info("Please place '%s'" %
                         self.toCreate[len(self.returnList) + 1])
            dragFactory.clickMesh.release(self)

        def finalize(self):
            log.debug("returnList: %s" % self.returnList)
            log.debug("createdList: %s" % self.createdList)
            buffer = []  #self.i_module.templateNull.templateStarterData
            log.debug("starting data: %s" % buffer)

            #Make sure we have enough points
            #==============
            handles = self.i_module.templateNull.handles
            if len(self.returnList) < handles:
                log.warning("Creating curve to get enough points")
                curve = curves.curveFromPosList(self.returnList)
                mc.rebuildCurve(curve,
                                ch=0,
                                rpo=1,
                                rt=0,
                                end=1,
                                kr=0,
                                kcp=0,
                                kep=1,
                                kt=0,
                                s=(handles - 1),
                                d=1,
                                tol=0.001)
                self.returnList = curves.returnCVsPosList(
                    curve)  #Get the pos of the cv's
                mc.delete(curve)

            #Store info
            #==============
            for i, p in enumerate(self.returnList):
                buffer.append(p)  #need to ensure it's storing properly
                #log.info('[%s,%s]'%(buffer[i],p))

            #Store locs
            #==============
            log.debug("finish data: %s" % buffer)
            self.templateNull.__setattr__('templateStarterData',
                                          buffer,
                                          lock=True)
            #self.i_module.templateNull.templateStarterData = buffer#store it
            log.info("'%s' sized!" % self.i_module.getShortName())
            dragFactory.clickMesh.finalize(self)

    #Start up our sizer
    return moduleSizer(mode='midPoint',
                       mesh=geo,
                       create='locator',
                       toCreate=namesToCreate)