def __init__(self):
super(CWCRev2_Loader, self).__init__()
self.driver = Ztex1v1()
self._fwFLoc = self.read_setting(
'firmware-location',
os.path.join(
util.getRootDir(),
os.path.normpath(
"../hardware/capture/chipwhisperer-rev2/ezusb-firmware/ztex-sdk/examples/usb-fpga-1.11/1.11c/openadc/OpenADC.ihx"
)))
self._bsZipLoc = self.read_setting(
'zipbitstream-location',
os.path.join(
util.getRootDir(),
os.path.normpath(
"../hardware/capture/chipwhisperer-rev2/cwrev2_firmware.zip"
)))
self._bsZipLoc_filename = "interface.bit"
self._bsLoc = self.read_setting(
'debugbitstream-location',
os.path.join(
util.getRootDir(),
os.path.normpath(
"../hardware/capture/chipwhisperer-rev2/hdl/ztex_rev2_1.11c_ise/interface.bit"
)))
self._bsBuiltinData = cwcr2_getsome("cwrev2_firmware.zip",
filelike=True)
self._fwBuiltinData = cwcr2_getsome("OpenADC.ihx", filelike=True)
def __init__(self):
super(CWCRev2_Loader, self).__init__()
self.driver = Ztex1v1()
self._fwFLoc = self.read_setting('firmware-location', os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-rev2/ezusb-firmware/ztex-sdk/examples/usb-fpga-1.11/1.11c/openadc/OpenADC.ihx")))
self._bsZipLoc = self.read_setting('zipbitstream-location',os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-rev2/cwrev2_firmware.zip")))
self._bsZipLoc_filename = "interface.bit"
self._bsLoc = self.read_setting('debugbitstream-location',os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-rev2/hdl/ztex_rev2_1.11c_ise/interface.bit")))
self._bsBuiltinData = cwcr2_getsome("cwrev2_firmware.zip", filelike=True)
self._fwBuiltinData = cwcr2_getsome("OpenADC.ihx", filelike=True)
def __init__(self):
super(CWLite_Loader, self).__init__()
self.driver = None
def_bsZipLoc = os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-lite/cwlite_firmware.zip"))
def_bsLoc = os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-lite/hdl/cwlite_interface.bit"))
self._bsZipLoc = self._bsZipLoc = self.read_setting('zipbitstream-location', def_bsZipLoc)
self._bsZipLoc_filename = "cwlite_interface.bit"
self._bsLoc = self.read_setting('debugbitstream-location', def_bsLoc)
self._fwFLoc = ""
self._bsBuiltinData = cwlite_getsome("cwlite_firmware.zip", filelike=True)
def __init__(self):
super(CWLite_Loader, self).__init__()
self.driver = None
def_bsZipLoc = os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-lite/cwlite_firmware.zip"))
def_bsLoc = os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-lite/hdl/cwlite_ise/cwlite_interface.bit"))
self._bsZipLoc = self._bsZipLoc = self.read_setting('zipbitstream-location', def_bsZipLoc)
self._bsZipLoc_filename = "cwlite_interface.bit"
self._bsLoc = self.read_setting('debugbitstream-location', def_bsLoc)
self._fwFLoc = ""
self._bsBuiltinData = cwlite_getsome("cwlite_firmware.zip", filelike=True)
def __init__(self):
super(CW1200_Loader, self).__init__()
self.driver = None
def_bsZipLoc = os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-cw1200/cw1200_firmware.zip"))
def_bsLoc = os.path.join(util.getRootDir(), os.path.normpath("../hardware/capture/chipwhisperer-cw1200/hdl/cw1200_ise/cw1200_interface.bit"))
self._bsZipLoc = self._bsZipLoc = self.read_setting('zipbitstream-location', def_bsZipLoc)
self._bsZipLoc_filename = "cw1200_interface.bit"
self._bsLoc = self.read_setting('debugbitstream-location', def_bsLoc)
self._fwFLoc = ""
# TODO: add final CW1200 release bitstream
#self._bsBuiltinData = cw1200_getsome("cw1200_firmware.zip", filelike=True)
self._bsBuiltinData = None
if self._release_mode == 'builtin':
logging.info("Setting CW1200 firmware to use zip file by default...")
self.setFPGAMode("zipfile")
def __init__(self, parent=None, cwliteUSB=None):
super(SAM3LoaderConfig, self).__init__(parent)
if cwliteUSB:
self.cwLiteUSB = cwliteUSB._usb
else:
self.cwLiteUSB = None
self.setWindowTitle("SAM3U Firmware Loader")
layout = QVBoxLayout()
gbSAMMode = QGroupBox("Step 1. Enable Bootloader")
layoutGB = QVBoxLayout()
if self.cwLiteUSB:
pbBootmode = QPushButton("Enable Bootloader Mode")
pbBootmode.clicked.connect(self.enableBootloader)
layoutGB.addWidget(pbBootmode)
else:
labelUnconnected = QLabel(
"USB not connected. If you have not yet enabled bootload mode: close this dialog, "
+
"connect to the scope/target, and open it again. If you have already enabled bootload "
+ "mode skip to Step 2.")
labelUnconnected.setWordWrap(True)
layoutGB.addWidget(labelUnconnected)
labelWarnBoot1 = QLabel(
"WARNING: Bootload mode will stay enabled until new firmware is loaded."
)
labelWarnBoot2 = QLabel(
"NOTE: This only works on firmware 0.11 or later. Short 'ERASE' jumper to enable bootloader mode on earlier firmwares."
)
labelWarnBoot1.setWordWrap(True)
labelWarnBoot2.setWordWrap(True)
layoutGB.addWidget(labelWarnBoot1)
layoutGB.addWidget(labelWarnBoot2)
gbSAMMode.setLayout(layoutGB)
layout.addWidget(gbSAMMode)
gbSAMProgram = QGroupBox("Step 2. Program Binary")
layoutSAMGB = QVBoxLayout()
layoutFW = QHBoxLayout()
self.firmwareLocation = QtFixes.QLineEdit()
self.firmwareButton = QPushButton("Find")
self.firmwareButton.clicked.connect(self.findFirmware)
layoutFW.addWidget(QLabel("SAM3U Firmware"))
layoutFW.addWidget(self.firmwareLocation)
layoutFW.addWidget(self.firmwareButton)
self.firmwareButton.setEnabled(False)
self.firmwareLocation.setEnabled(False)
self.serlist = QComboBox()
serrefresh = QPushButton("Update List")
serrefresh.clicked.connect(self.serialRefresh)
layoutSerList = QHBoxLayout()
layoutSerList.addWidget(self.serlist)
layoutSerList.addWidget(serrefresh)
pbProgram = QPushButton("Run Program")
pbProgram.clicked.connect(self.runSamba)
self.programStatus = QTextEdit(
"You will have to wait for device to attach as a serial port. Once this "
+
"happens, press the 'Update List' button and select the proper serial port."
+ " Then hit 'Run Program' to update your device.")
self.programStatus.setReadOnly(True)
self.rbBuiltin = QRadioButton("Built-in")
self.rbExternal = QRadioButton("External File")
self.rbBuiltin.setChecked(True)
FWModeRBLayout = QHBoxLayout()
FWModeRBLayout.addWidget(self.rbBuiltin)
FWModeRBLayout.addWidget(self.rbExternal)
self.rbExternal.clicked.connect(self.rbbuiltinchange)
self.rbBuiltin.clicked.connect(self.rbbuiltinchange)
layoutSAMGB.addLayout(FWModeRBLayout)
layoutSAMGB.addLayout(layoutFW)
layoutSAMGB.addLayout(layoutSerList)
layoutSAMGB.addWidget(pbProgram)
layoutSAMGB.addWidget(self.programStatus)
gbSAMProgram.setLayout(layoutSAMGB)
layout.addWidget(gbSAMProgram)
sam3uFWLoc = QSettings().value("cwlite-sam3u-firmware-location")
rootprefix = util.getRootDir() + "/"
if not sam3uFWLoc:
defLocfwF = rootprefix + "../../../hardware/capture/chipwhisperer-lite/sam3u_fw/SAM3U_VendorExample/Debug/SAM3U_CW1173.bin"
if os.path.isfile(defLocfwF):
sam3uFWLoc = str(defLocfwF)
QSettings().setValue("cwlite-sam3u-firmware-location",
sam3uFWLoc)
self.firmwareLocation.setText(sam3uFWLoc)
gbDone = QGroupBox("Step 3. Reset")
gbDoneLayout = QHBoxLayout()
gbDone.setLayout(gbDoneLayout)
gbDoneLabel = QLabel(
"If the above succeeds, you need to power-cycle the target. Unplug & replug target. You may also "
+ "need to close and re-open ChipWhisperer-Capture.")
gbDoneLabel.setWordWrap(True)
gbDoneLayout.addWidget(gbDoneLabel)
layout.addWidget(gbDone)
self.setLayout(layout)
def __init__(self, parent=None, cwliteUSB=None):
super(SAM3LoaderConfig, self).__init__(parent)
if cwliteUSB:
self.cwLiteUSB = cwliteUSB._usb
else:
self.cwLiteUSB = None
self.setWindowTitle("SAM3U Firmware Loader")
layout = QVBoxLayout()
gbSAMMode = QGroupBox("Step 1. Enable Bootloader")
layoutGB = QVBoxLayout()
if self.cwLiteUSB:
pbBootmode = QPushButton("Enable Bootloader Mode")
pbBootmode.clicked.connect(self.enableBootloader)
layoutGB.addWidget(pbBootmode)
else:
labelUnconnected = QLabel("USB not connected. If you have not yet enabled bootload mode: close this dialog, " +
"connect to the scope/target, and open it again. If you have already enabled bootload " +
"mode skip to Step 2.")
labelUnconnected.setWordWrap(True)
layoutGB.addWidget(labelUnconnected)
labelWarnBoot1 = QLabel("WARNING: Bootload mode will stay enabled until new firmware is loaded.")
labelWarnBoot2 = QLabel("NOTE: This only works on firmware 0.11 or later. Short 'ERASE' jumper to enable bootloader mode on earlier firmwares.")
labelWarnBoot1.setWordWrap(True)
labelWarnBoot2.setWordWrap(True)
layoutGB.addWidget(labelWarnBoot1)
layoutGB.addWidget(labelWarnBoot2)
gbSAMMode.setLayout(layoutGB)
layout.addWidget(gbSAMMode)
gbSAMProgram = QGroupBox("Step 2. Program Binary")
layoutSAMGB = QVBoxLayout()
layoutFW = QHBoxLayout()
self.firmwareLocation = QtFixes.QLineEdit()
firmwareButton = QPushButton("Find")
firmwareButton.clicked.connect(self.findFirmware)
layoutFW.addWidget(QLabel("SAM3U Firmware"))
layoutFW.addWidget(self.firmwareLocation)
layoutFW.addWidget(firmwareButton)
self.serlist = QComboBox()
serrefresh = QPushButton("Update List")
serrefresh.clicked.connect(self.serialRefresh)
layoutSerList = QHBoxLayout()
layoutSerList.addWidget(self.serlist)
layoutSerList.addWidget(serrefresh)
pbProgram = QPushButton("Run Program")
pbProgram.clicked.connect(self.runSamba)
self.programStatus = QTextEdit("You will have to wait for device to attach as a serial port. Once this " +
"happens, press the 'Update List' button and select the proper serial port." +
" Then hit 'Run Program' to update your device.")
self.programStatus.setReadOnly(True)
layoutSAMGB.addLayout(layoutFW)
layoutSAMGB.addLayout(layoutSerList)
layoutSAMGB.addWidget(pbProgram)
layoutSAMGB.addWidget(self.programStatus)
#layoutSAMGB.addWidget(self.bossaOut)
gbSAMProgram.setLayout(layoutSAMGB)
layout.addWidget(gbSAMProgram)
sam3uFWLoc = QSettings().value("cwlite-sam3u-firmware-location")
rootprefix = util.getRootDir() + "/"
if not sam3uFWLoc:
defLocfwF = rootprefix + "../../../hardware/api/chipwhisperer-lite/sam3u_fw/SAM3U_VendorExample/Debug/SAM3U_CW1173.bin"
if os.path.isfile(defLocfwF):
sam3uFWLoc = str(defLocfwF)
QSettings().setValue("cwlite-sam3u-firmware-location", sam3uFWLoc)
self.firmwareLocation.setText(sam3uFWLoc)
gbDone = QGroupBox("Step 3. Reset")
gbDoneLayout = QHBoxLayout()
gbDone.setLayout(gbDoneLayout)
gbDoneLabel = QLabel("If the above succeeds, you need to power-cycle the target. Unplug & replug target. You may also " +
"need to close and re-open ChipWhisperer-Capture.")
gbDoneLabel.setWordWrap(True)
gbDoneLayout.addWidget(gbDoneLabel)
layout.addWidget(gbDone)
self.setLayout(layout)