def set_memory(self, mem):
LOG.debug("Setting %i(%s)" % (mem.number, mem.extd_number))
_mem = self._memobj.channels[mem.number - 1]
_nam = self._memobj.names[mem.number - 1]
bitpos = (1 << ((mem.number - 1) % 8))
bytepos = ((mem.number - 1) / 8)
_scn = self._memobj.scanflags[bytepos]
_usd = self._memobj.usedflags[bytepos]
if mem.empty:
_mem.set_raw("\xFF" * 16)
_nam.name = ("\xFF" * 7)
_usd &= ~bitpos
_scn &= ~bitpos
return
else:
_usd |= bitpos
if _mem.get_raw() == ("\xFF" * 16):
LOG.debug("Initializing empty memory")
_mem.set_raw("\x00" * 16)
_scn |= bitpos
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
_namelength = self.get_features().valid_name_length
for i in range(_namelength):
try:
_nam.name[i] = mem.name[i]
except IndexError:
_nam.name[i] = "\xFF"
_mem.scan = mem.skip != "S"
if mem.skip == "S":
_scn &= ~bitpos
else:
_scn |= bitpos
_mem.isnarrow = mem.mode == "NFM"
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.txtone, txmode, txtone, txpol)
self.encode_tone(_mem.rxtone, rxmode, rxtone, rxpol)
_mem.highpower = mem.power == RT23_POWER_LEVELS[1]
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
def set_memory(self, mem):
_mem, _name = self._get_memobjs(mem.number)
if mem.empty:
_mem.set_raw('\xFF' * 16)
_name.set_raw('\xFF' * 7)
return
_mem.set_raw('\x00' * 16)
_mem.rx_freq = mem.freq / 10
if mem.duplex == '-':
mult = -1
elif not mem.duplex:
mult = 0
else:
mult = 1
_mem.tx_freq = (mem.freq + (mem.offset * mult)) / 10
(txmode, txval, txpol), (rxmode, rxval, rxpol) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txval, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxval, rxpol)
_mem.narrow = mem.mode == 'NFM'
_mem.scanadd = mem.skip != 'S'
_mem.highpower = POWER_LEVELS.index(mem.power) if mem.power else 1
_name.name = mem.name.rstrip(' ').ljust(7, '\xFF')
def set_memory(self, mem):
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * (_mem.size() / 8))
return
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
txtone, rxtone = chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.txtone, *txtone)
self._encode_tone(_mem.rxtone, *rxtone)
_mem.narrow = 'N' in mem.mode
_mem.highpower = mem.power == H777_POWER_LEVELS[1]
_mem.skip = mem.skip == "S"
for setting in mem.extra:
# NOTE: Only two settings right now, both are inverted
setattr(_mem, setting.get_name(), not int(setting.value))
def set_memory(self, mem):
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * (_mem.size() / 8))
return
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
txtone, rxtone = chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.txtone, *txtone)
self._encode_tone(_mem.rxtone, *rxtone)
_mem.narrow = 'N' in mem.mode
_mem.highpower = mem.power == H777_POWER_LEVELS[1]
_mem.skip = mem.skip == "S"
for setting in mem.extra:
# NOTE: Only two settings right now, both are inverted
setattr(_mem, setting.get_name(), not setting.value)
def set_memory(self, mem):
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * (_mem.size() / 8))
return
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
_mem.wide = mem.mode == "FM"
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.txtone, txmode, txtone, txpol)
self.encode_tone(_mem.rxtone, rxmode, rxtone, rxpol)
_mem.highpower = mem.power == RT1_POWER_LEVELS[1]
_mem.skip = mem.skip == "S"
for setting in mem.extra:
setattr(_mem, setting.get_name(), not int(setting.value))
def set_memory(self, mem):
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * (_mem.size() / 8))
return
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
_mem.wide = mem.mode == "FM"
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.txtone, txmode, txtone, txpol)
self.encode_tone(_mem.rxtone, rxmode, rxtone, rxpol)
_mem.highpower = mem.power == RT1_POWER_LEVELS[1]
_mem.skip = mem.skip == "S"
for setting in mem.extra:
setattr(_mem, setting.get_name(), not int(setting.value))
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI
not ready yet, so it will return as is"""
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
# Empty memory
if mem.empty:
_mem.set_raw("\xFF" * 16)
self.set_active(mem.number - 1, False)
return
# freq rx
_mem.rxfreq = mem.freq / 10
# rx enabled if valid channel,
# set tx to on, we decide if off after duplex = off
_mem.rxen = 0
_mem.txen = 0
# freq tx
if mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
# set tx freq on the memap to xff
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
# erase the txen flag
_mem.txen = 255
else:
_mem.txfreq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.tx_tone, txmode, txtone, txpol)
self.encode_tone(_mem.rx_tone, rxmode, rxtone, rxpol)
# power, default power is high, as the low is configurable via a key
if mem.power is None:
mem.power = POWER_LEVELS[1]
_mem.power = POWER_LEVELS.index(mem.power)
# skip
self.set_scan(mem.number - 1, mem.skip)
# set as active
self.set_active(mem.number - 1, True)
# extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
return mem
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI
not ready yet, so it will return as is"""
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
# Empty memory
if mem.empty:
_mem.set_raw("\xFF" * 16)
self.set_active(mem.number - 1, False)
return
# freq rx
_mem.rxfreq = mem.freq / 10
# rx enabled if valid channel,
# set tx to on, we decide if off after duplex = off
_mem.rxen = 0
_mem.txen = 0
# freq tx
if mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
# set tx freq on the memap to xff
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
# erase the txen flag
_mem.txen = 255
else:
_mem.txfreq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.tx_tone, txmode, txtone, txpol)
self.encode_tone(_mem.rx_tone, rxmode, rxtone, rxpol)
# power, default power is high, as the low is configurable via a key
if mem.power is None:
mem.power = POWER_LEVELS[1]
_mem.power = POWER_LEVELS.index(mem.power)
# skip
self.set_scan(mem.number - 1, mem.skip)
# set as active
self.set_active(mem.number - 1, True)
# extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
return mem
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI
not ready yet, so it will return as is"""
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
_tone = self._memobj.tone[mem.number - 1]
_ch = self._memobj.ch_settings[mem.number - 1]
# Empty memory
if mem.empty:
_mem.set_raw("\xFF" * 8)
# empty the active bit
self.set_active(mem.number - 1, False)
return
# freq rx
_mem.rxfreq = mem.freq / 10
# freq tx
if mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
for byte in _mem.txfreq:
byte.set_raw("\xFF")
else:
_mem.txfreq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_tone.tx_tone, txmode, txtone, txpol)
self.encode_tone(_tone.rx_tone, rxmode, rxtone, rxpol)
# power, default power is low
if mem.power is None:
mem.power = POWER_LEVELS[0]
_ch.power = POWER_LEVELS.index(mem.power)
# wide/marrow
_ch.wide = MODES.index(mem.mode)
# skip
self.set_scan(mem.number - 1, mem.skip)
# extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
# set the mem a active in the _memmap
self.set_active(mem.number - 1)
return mem
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI
not ready yet, so it will return as is"""
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
_tone = self._memobj.tone[mem.number - 1]
_ch = self._memobj.ch_settings[mem.number - 1]
# Empty memory
if mem.empty:
_mem.set_raw("\xFF" * 8)
# empty the active bit
self.set_active(mem.number - 1, False)
return
# freq rx
_mem.rxfreq = mem.freq / 10
# freq tx
if mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
for byte in _mem.txfreq:
byte.set_raw("\xFF")
else:
_mem.txfreq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_tone.tx_tone, txmode, txtone, txpol)
self.encode_tone(_tone.rx_tone, rxmode, rxtone, rxpol)
# power, default power is low
if mem.power is None:
mem.power = POWER_LEVELS[0]
_ch.power = POWER_LEVELS.index(mem.power)
# wide/marrow
_ch.wide = MODES.index(mem.mode)
# skip
self.set_scan(mem.number - 1, mem.skip)
# extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
# set the mem a active in the _memmap
self.set_active(mem.number - 1)
return mem
def set_memory(self, mem):
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number]
cbyte = mem.number / 8
cbit = 7 - (mem.number % 8)
if mem.empty:
self._memobj.csetflag[cbyte].c[cbit] = 1
self._memobj.cskipflag[cbyte].c[cbit] = 1
return
self._memobj.csetflag[cbyte].c[cbit] = 0
self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0
_mem.set_raw("\x00" * 32)
_mem.freq = mem.freq / 100 # Convert to low-level frequency
_mem.offset = mem.offset / 100 # Convert to low-level frequency
_mem.name = mem.name.ljust(7)[:7] # Store the alpha tag
_mem.duplex = DUPLEXES.index(mem.duplex)
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone))
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
def set_memory(self, mem):
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number]
cbyte = mem.number / 8
cbit = 7 - (mem.number % 8)
if mem.empty:
self._memobj.csetflag[cbyte].c[cbit] = 1
self._memobj.cskipflag[cbyte].c[cbit] = 1
return
self._memobj.csetflag[cbyte].c[cbit] = 0
self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0
_mem.set_raw("\x00" * 32)
_mem.freq = mem.freq / 100 # Convert to low-level frequency
_mem.offset = mem.offset / 100 # Convert to low-level frequency
_mem.name = mem.name.ljust(7)[:7] # Store the alpha tag
_mem.duplex = DUPLEXES.index(mem.duplex)
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone))
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI"""
# get the eprom representation of this channel
_mem = self._get_special(mem.number)
# if empty memmory
if mem.empty:
# the channel itself
_mem.set_raw("\xFF" * 16)
# return it
return mem
# frequency
_mem.rxfreq = mem.freq / 10
# duplex/ offset Offset is an absolute value
_mem.txoffset = mem.offset / 10
# must work out the polarity
if mem.duplex == "":
_mem.offplus = 0
_mem.offminus = 0
elif mem.duplex == "+":
_mem.offplus = 1
_mem.offminus = 0
elif mem.duplex == "-":
_mem.offplus = 0
_mem.offminus = 1
elif mem.duplex == "split":
if mem.freq > mem.offset:
_mem.offplus = 0
_mem.offminus = 1
_mem.txoffset = (mem.freq - mem.offset) / 10
else:
_mem.offplus = 1
_mem.offminus = 0
_mem.txoffset = (mem.offset - mem.freq) / 10
# wide/narrow
_mem.wide = MODES.index(mem.mode)
# skip
_mem.noskip = SKIP_VALUES.index(mem.skip)
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.txtone, _mem.ttondinv, txmode, txtone, txpol)
self._encode_tone(_mem.rxtone, _mem.rtondinv, rxmode, rxtone, rxpol)
return mem
def _set_tone(self, mem, _mem):
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.tx_tmode = TMODES.index(txmode)
_mem.rx_tmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.tx_tone = TONES.index(txtone) + 1
elif txmode == "DTCS":
_mem.tx_tmode = txpol == "R" and 0x03 or 0x02
_mem.tx_tone = DTCS_CODES.index(txtone) + 1
if rxmode == "Tone":
_mem.rx_tone = TONES.index(rxtone) + 1
elif rxmode == "DTCS":
_mem.rx_tmode = rxpol == "R" and 0x03 or 0x02
_mem.rx_tone = DTCS_CODES.index(rxtone) + 1
def _set_tone(self, mem, _mem):
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.tx_tmode = TMODES.index(txmode)
_mem.rx_tmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.tx_tone = TONES.index(txtone) + 1
elif txmode == "DTCS":
_mem.tx_tmode = txpol == "R" and 0x03 or 0x02
_mem.tx_tone = DTCS_CODES.index(txtone) + 1
if rxmode == "Tone":
_mem.rx_tone = TONES.index(rxtone) + 1
elif rxmode == "DTCS":
_mem.rx_tmode = rxpol == "R" and 0x03 or 0x02
_mem.rx_tone = DTCS_CODES.index(rxtone) + 1
def set_memory(self, mem):
bitpos = (1 << ((mem.number - 1) % 8))
bytepos = ((mem.number - 1) / 8)
LOG.debug("bitpos %s" % bitpos)
LOG.debug("bytepos %s" % bytepos)
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
LOG.debug("initializing memory channel %d" % mem.number)
_mem.set_raw(BLANK_MEMORY)
if mem.empty:
return
_mem.rx_freq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.tx_freq[i].set_raw("\xFF")
elif mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
else:
_mem.tx_freq = mem.freq / 10
# power, default power is low
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0 # low
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.tx_tone, txmode, txtone, txpol)
self.encode_tone(_mem.rx_tone, rxmode, rxtone, rxpol)
_mem.mode = MODE_LIST.index(mem.mode)
# extra settings are unfortunately inverted
for setting in mem.extra:
LOG.debug("@set_mem:", setting.get_name(), setting.value)
setattr(_mem, setting.get_name(), not setting.value)
def set_memory(self, mem):
bitpos = (1 << ((mem.number - 1) % 8))
bytepos = ((mem.number - 1) / 8)
LOG.debug("bitpos %s" % bitpos)
LOG.debug("bytepos %s" % bytepos)
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
LOG.debug("initializing memory channel %d" % mem.number)
_mem.set_raw(BLANK_MEMORY)
if mem.empty:
return
_mem.rx_freq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.tx_freq[i].set_raw("\xFF")
elif mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
else:
_mem.tx_freq = mem.freq / 10
# power, default power is low
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0 # low
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.tx_tone, txmode, txtone, txpol)
self.encode_tone(_mem.rx_tone, rxmode, rxtone, rxpol)
_mem.mode = MODE_LIST.index(mem.mode)
# extra settings are unfortunately inverted
for setting in mem.extra:
LOG.debug("@set_mem:", setting.get_name(), setting.value)
setattr(_mem, setting.get_name(), not setting.value)
def set_memory(self, mem):
_mem, _flg = self._get_memobjs(mem.number)
if mem.empty:
_flg.set()
return
_flg.clear()
_mem.set_raw("\x00" * 32)
_mem.freq = mem.freq / 100
_mem.offset = mem.offset / 100
_mem.name = mem.name.ljust(7)
_mem.is_am = mem.mode == "AM"
_mem.duplex = DUPLEXES.index(mem.duplex)
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem, 'tx',
chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
self._set_dcs_index(_mem, 'rx',
chirp_common.ALL_DTCS_CODES.index(rxtone))
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
_flg.set_skip(mem.skip == "S")
_flg.set_pskip(mem.skip == "P")
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
def set_memory(self, mem):
_mem, _flg = self._get_memobjs(mem.number)
if mem.empty:
_flg.set()
return
_flg.clear()
_mem.set_raw("\x00" * 32)
_mem.freq = mem.freq / 100
_mem.offset = mem.offset / 100
_mem.name = mem.name.ljust(7)
_mem.is_am = mem.mode == "AM"
_mem.duplex = DUPLEXES.index(mem.duplex)
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem, 'tx',
chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
self._set_dcs_index(_mem, 'rx',
chirp_common.ALL_DTCS_CODES.index(rxtone))
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
_flg.set_skip(mem.skip == "S")
_flg.set_pskip(mem.skip == "P")
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
def set_memory(self, mem):
_mem, _name = self._get_memobjs(mem.number)
e = self._memobj.enable[(mem.number - 1) / 8]
s = self._memobj.skip[(mem.number - 1) / 8]
if mem.empty:
_mem.set_raw("\xFF" * 32)
e.flags[7 - ((mem.number - 1) % 8)] = False
s.flags[7 - ((mem.number - 1) % 8)] = False
return
else:
e.flags[7 - ((mem.number - 1) % 8)] = True
if _mem.get_raw() == ("\xFF" * 32):
LOG.debug("Initializing empty memory")
_mem.set_raw("\x00" * 32)
_mem.rx_freq = mem.freq / 10
if mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
elif mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
else:
_mem.tx_freq = mem.freq / 10
_mem.duplex = THUVF8D_DUPLEX.index(mem.duplex)
_mem.offset = mem.offset / 10
(txmode, txval, txpol), (rxmode, rxval, rxpol) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txval, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxval, rxpol)
_mem.name = mem.name.rstrip(' ').ljust(7, "\xFF")
flag_index = 7 - ((mem.number - 1) % 8)
s.flags[flag_index] = (mem.skip == "")
_mem.wideband = mem.mode == "FM"
_mem.ishighpower = mem.power == POWER_LEVELS[0]
for element in mem.extra:
setattr(_mem, element.get_name(), element.value)
def set_memory(self, mem):
_mem = self._memobj.memories[mem.number]
_nam = self._memobj.names[mem.number]
if mem.empty:
_mem.set_raw(b'\xff' * 16)
_nam.set_raw(b'\xff' * 16)
return
if int(_mem.rxfreq) == 166666665:
LOG.debug('Initializing new memory %i' % mem.number)
_mem.set_raw(b'\x00' * 16)
_nam.name = mem.name.ljust(10)
_mem.rxfreq = mem.freq // 10
if mem.duplex == '':
_mem.txfreq = mem.freq // 10
elif mem.duplex == 'split':
_mem.txfreq = mem.offset // 10
elif mem.duplex == 'off':
_mem.txfreq.set_raw(b'\xff\xff\xff\xff')
elif mem.duplex == '-':
_mem.txfreq = (mem.freq - mem.offset) // 10
elif mem.duplex == '+':
_mem.txfreq = (mem.freq + mem.offset) // 10
else:
raise errors.RadioError('Unsupported duplex mode %r' % mem.duplex)
txtone, rxtone = chirp_common.split_tone_encode(mem)
LOG.debug('tx tone is %s' % repr(txtone))
LOG.debug('rx tone is %s' % repr(rxtone))
_mem.txtone = self._encode_tone(*txtone)
_mem.rxtone = self._encode_tone(*rxtone)
try:
_mem.power = POWER_LEVELS.index(mem.power)
except ValueError:
_mem.power = 0
_mem.narrow = mem.mode == 'NFM'
_mem.scan = mem.skip != 'S'
if mem.extra:
self._set_extra(_mem, mem)
def set_memory(self, mem):
_mem, _name = self._get_memobjs(mem.number)
e = self._memobj.enable[(mem.number - 1) / 8]
s = self._memobj.skip[(mem.number - 1) / 8]
if mem.empty:
_mem.set_raw("\xFF" * 32)
e.flags[7 - ((mem.number - 1) % 8)] = False
s.flags[7 - ((mem.number - 1) % 8)] = False
return
else:
e.flags[7 - ((mem.number - 1) % 8)] = True
if _mem.get_raw() == ("\xFF" * 32):
LOG.debug("Initializing empty memory")
_mem.set_raw("\x00" * 32)
_mem.rx_freq = mem.freq / 10
if mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
elif mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
else:
_mem.tx_freq = mem.freq / 10
_mem.duplex = THUVF8D_DUPLEX.index(mem.duplex)
_mem.offset = mem.offset / 10
(txmode, txval, txpol), (rxmode, rxval, rxpol) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txval, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxval, rxpol)
_mem.name = mem.name.rstrip(' ').ljust(7, "\xFF")
flag_index = 7 - ((mem.number - 1) % 8)
s.flags[flag_index] = (mem.skip == "")
_mem.wideband = mem.mode == "FM"
_mem.ishighpower = mem.power == POWER_LEVELS[0]
for element in mem.extra:
setattr(_mem, element.get_name(), element.value)
def set_memory(self, mem):
_mem, _nam = self._get_memobjs(mem.number)
if mem.empty:
if _nam is None:
raise errors.InvalidValueError("VFO channels can not be empty")
_mem.set_raw("\xFF" * 16)
return
if _mem.get_raw() == ("\xFF" * 16):
_mem.set_raw("\x00" * 13 + "\xFF" * 3)
_mem.freq = mem.freq / 10
if mem.duplex == "off":
_mem.duplex = DUPLEX.index("-")
_mem.offset = _mem.freq
elif mem.duplex == "split":
diff = mem.offset - mem.freq
_mem.duplex = DUPLEX.index("-") if diff < 0 else DUPLEX.index("+")
_mem.offset = abs(diff) / 10
else:
_mem.offset = mem.offset / 10
_mem.duplex = DUPLEX.index(mem.duplex)
tx, rx = chirp_common.split_tone_encode(mem)
self._encode_tone(_mem, 'tx', *tx)
self._encode_tone(_mem, 'rx', *rx)
_mem.isnarrow = mem.mode == "NFM"
_mem.scanadd = mem.skip == ""
_mem.highpower = mem.power == POWER_LEVELS[1]
if _nam:
for i in range(0, 5):
try:
_nam[i] = CHARSET.index(mem.name[i])
except IndexError:
_nam[i] = 0xFF
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
def set_memory(self, mem):
_mem, _nam = self._get_memobjs(mem.number)
if mem.empty:
if _nam is None:
raise errors.InvalidValueError("VFO channels can not be empty")
_mem.set_raw("\xFF" * 16)
return
if _mem.get_raw() == ("\xFF" * 16):
_mem.set_raw("\x00" * 13 + "\xFF" * 3)
_mem.freq = mem.freq / 10
if mem.duplex == "off":
_mem.duplex = DUPLEX.index("-")
_mem.offset = _mem.freq
elif mem.duplex == "split":
diff = mem.offset - mem.freq
_mem.duplex = DUPLEX.index("-") if diff < 0 else DUPLEX.index("+")
_mem.offset = abs(diff) / 10
else:
_mem.offset = mem.offset / 10
_mem.duplex = DUPLEX.index(mem.duplex)
tx, rx = chirp_common.split_tone_encode(mem)
self._encode_tone(_mem, 'tx', *tx)
self._encode_tone(_mem, 'rx', *rx)
_mem.isnarrow = mem.mode == "NFM"
_mem.scanadd = mem.skip == ""
_mem.highpower = mem.power == POWER_LEVELS[1]
if _nam:
for i in range(0, 5):
try:
_nam[i] = CHARSET.index(mem.name[i])
except IndexError:
_nam[i] = 0xFF
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
def set_memory(self, mem):
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * (_mem.size() / 8))
return
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
txtone, rxtone = chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.txtone, *txtone)
self._encode_tone(_mem.rxtone, *rxtone)
_mem.narrow = 'N' in mem.mode
_mem.highpower = mem.power == H777_POWER_LEVELS[1]
_mem.skip = mem.skip == "S"
for setting in mem.extra:
# NOTE: Only two settings right now, both are inverted
setattr(_mem, setting.get_name(), not int(setting.value))
# When set to one, official programming software (BF-480) shows always
# "WFM", even if we choose "NFM". Therefore, for compatibility
# purposes, we will set these to zero.
_mem.unknown1 = 0
_mem.unknown2 = 0
_mem.unknown3 = 0
def set_memory(self, mem):
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * (_mem.size() / 8))
return
_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10
txtone, rxtone = chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.txtone, *txtone)
self._encode_tone(_mem.rxtone, *rxtone)
_mem.narrow = 'N' in mem.mode
_mem.highpower = mem.power == H777_POWER_LEVELS[1]
_mem.skip = mem.skip == "S"
for setting in mem.extra:
# NOTE: Only two settings right now, both are inverted
setattr(_mem, setting.get_name(), not int(setting.value))
# When set to one, official programming software (BF-480) shows always
# "WFM", even if we choose "NFM". Therefore, for compatibility
# purposes, we will set these to zero.
_mem.unknown1 = 0
_mem.unknown2 = 0
_mem.unknown3 = 0
def set_memory(self, mem):
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * 16)
return
if _mem.get_raw() == ("\xFF" * 16):
print "Initializing empty memory"
_mem.set_raw("\x00" * 16)
_mem.rx_freq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.tx_freq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.tx_freq = mem.offset / 10
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
elif mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
else:
_mem.tx_freq = mem.freq / 10
(txmode, txval, txpol), (rxmode, rxval, rxpol) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txval, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxval, rxpol)
self._memobj.names[mem.number - 1].name = mem.name.ljust(7, "\xFF")
_mem.scan = mem.skip == ""
_mem.isnarrow = mem.mode == "NFM"
_mem.ishighpower = mem.power == POWER_LEVELS[0]
for element in mem.extra:
setattr(_mem, element.get_name(), element.value)
def set_memory(self, memory):
"""Set the memory object @memory"""
rmem = self._memobj.memory[memory.number - 1]
if memory.empty:
rmem.set_raw('\xFF' * (rmem.size() // 8))
return
rmem.rxfreq = memory.freq / 10
set_txtone = True
if memory.duplex == 'off':
for i in range(0, 4):
rmem.txfreq[i].set_raw('\xFF')
# If recieve only then txtone value should be none
self._encode_tone(rmem.txtone, mode='', value=None, pol=None)
set_txtone = False
elif memory.duplex == 'split':
rmem.txfreq = memory.offset / 10
elif memory.duplex == '+':
rmem.txfreq = (memory.freq + memory.offset) / 10
elif memory.duplex == '-':
rmem.txfreq = (memory.freq - memory.offset) / 10
else:
rmem.txfreq = memory.freq / 10
txtone, rxtone = chirp_common.split_tone_encode(memory)
if set_txtone:
self._encode_tone(rmem.txtone, *txtone)
self._encode_tone(rmem.rxtone, *rxtone)
rmem.narrow = 'N' in memory.mode
rmem.skip = memory.skip == 'S'
for setting in memory.extra:
# NOTE: Only three settings right now, all are inverted
setattr(rmem, setting.get_name(), not int(setting.value))
def set_memory(self, mem):
_mem = self._memobj.memory[mem.number - 1]
if mem.empty:
_mem.set_raw("\xFF" * 16)
return
if _mem.get_raw() == ("\xFF" * 16):
LOG.debug("Initializing empty memory")
_mem.set_raw("\x00" * 16)
_mem.rx_freq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.tx_freq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.tx_freq = mem.offset / 10
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
elif mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
else:
_mem.tx_freq = mem.freq / 10
(txmode, txval, txpol), (rxmode, rxval, rxpol) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txval, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxval, rxpol)
self._memobj.names[mem.number - 1].name = mem.name.ljust(7, "\xFF")
_mem.scan = mem.skip == ""
_mem.isnarrow = mem.mode == "NFM"
_mem.ishighpower = mem.power == POWER_LEVELS[0]
for element in mem.extra:
setattr(_mem, element.get_name(), element.value)
def set_memory(self, memory):
"""Set the memory object @memory"""
rmem = self._memobj.memory[memory.number - 1]
if memory.empty:
rmem.set_raw('\xFF' * (rmem.size() / 8))
return
rmem.rxfreq = memory.freq / 10
set_txtone = True
if memory.duplex == 'off':
for i in range(0, 4):
rmem.txfreq[i].set_raw('\xFF')
# If recieve only then txtone value should be none
self._encode_tone(rmem.txtone, mode='', value=None, pol=None)
set_txtone = False
elif memory.duplex == 'split':
rmem.txfreq = memory.offset / 10
elif memory.duplex == '+':
rmem.txfreq = (memory.freq + memory.offset) / 10
elif memory.duplex == '-':
rmem.txfreq = (memory.freq - memory.offset) / 10
else:
rmem.txfreq = memory.freq / 10
txtone, rxtone = chirp_common.split_tone_encode(memory)
if set_txtone:
self._encode_tone(rmem.txtone, *txtone)
self._encode_tone(rmem.rxtone, *rxtone)
rmem.narrow = 'N' in memory.mode
rmem.skip = memory.skip == 'S'
for setting in memory.extra:
# NOTE: Only three settings right now, all are inverted
setattr(rmem, setting.get_name(), not int(setting.value))
def set_memory(self, mem):
"""Store details about a high-level memory to the memory map
This is called when a user edits a memory in the UI"""
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
# Empty memory
if mem.empty:
_mem.set_raw("\xFF" * 16)
return
# freq rx
_mem.rx_freq = mem.freq / 10
# freq tx
if mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
for i in range(0, 4):
_mem.tx_freq[i].set_raw("\xFF")
else:
_mem.tx_freq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txtone, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxtone, rxpol)
# extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
return mem
def set_memory(self, mem):
"""Store details about a high-level memory to the memory map
This is called when a user edits a memory in the UI"""
# Get a low-level memory object mapped to the image
_mem = self._memobj.memory[mem.number - 1]
# Empty memory
if mem.empty:
_mem.set_raw("\xFF" * 16)
return
# freq rx
_mem.rx_freq = mem.freq / 10
# freq tx
if mem.duplex == "+":
_mem.tx_freq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.tx_freq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
for i in range(0, 4):
_mem.tx_freq[i].set_raw("\xFF")
else:
_mem.tx_freq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self._encode_tone(_mem.tx_tone, txmode, txtone, txpol)
self._encode_tone(_mem.rx_tone, rxmode, rxtone, rxpol)
# extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
return mem
def set_memory(self, mem):
_mem, _flg = self._get_memobjs(mem.number)
if mem.empty:
_flg.set()
return
_flg.clear()
_mem.set_raw("\x00" * 32)
_mem.freq = mem.freq / 100
_mem.offset = mem.offset / 100
_mem.name = mem.name.ljust(7)
_mem.is_am = mem.mode == "AM"
_mem.tune_step = TUNING_STEPS.index(mem.tuning_step)
if mem.duplex == "off":
_mem.duplex = DUPLEXES.index("")
_mem.txoff = 1
else:
_mem.duplex = DUPLEXES.index(mem.duplex)
_mem.txoff = 0
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if rxmode != '':
_mem.sqlMode = SQL_MODES.index("CTCSS/DCS")
else:
_mem.sqlMode = SQL_MODES.index("Carrier")
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem, 'tx',
chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
self._set_dcs_index(_mem, 'rx',
chirp_common.ALL_DTCS_CODES.index(rxtone))
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
_flg.set_skip(mem.skip == "S")
_flg.set_pskip(mem.skip == "P")
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
for setting in mem.extra:
if setting.get_name() == "ignore":
LOG.debug("*** ignore: %s" % str(setting.value))
# Future: elif setting.get_name() == "custtone": Future:
# setattr(_mem, "custtone", setting.value.get_value() *
# 10)
elif setting.get_name() == "OPTSIGSQL":
if str(setting.value) != "Off":
_mem.sqlMode = SQL_MODES.index(str(setting.value))
elif setting.get_name() == "CUSTTONETX":
if setting.value:
_mem.txtone = len(TONES)
elif setting.get_name() == "CUSTTONERX":
if setting.value:
_mem.rxtone = len(TONES)
else:
setattr(_mem, setting.get_name(), setting.value)
return mem
def set_memory(self, mem):
bitpos = (1 << (mem.number % 8))
bytepos = (mem.number / 8)
_mem = self._memobj.memory[mem.number]
_skp = self._memobj.skip_flags[bytepos]
_usd = self._memobj.used_flags[bytepos]
if mem.empty:
_usd |= bitpos
_skp |= bitpos
_mem.set_raw("\xFF" * 32)
return
_usd &= ~bitpos
if _mem.get_raw() == ("\xFF" * 32):
LOG.debug("Initializing empty memory")
_mem.set_raw("\x00" * 32)
_mem.squelch = 3
_mem.freq = mem.freq / 100
if mem.duplex == "off":
_mem.duplex = DUPLEXES.index("")
_mem.offset = 0
_mem.tx_off = True
elif mem.duplex == "split":
diff = mem.offset - mem.freq
_mem.duplex = DUPLEXES.index("-") if diff < 0 \
else DUPLEXES.index("+")
_mem.offset = abs(diff) / 100
else:
_mem.offset = mem.offset / 100
_mem.duplex = DUPLEXES.index(mem.duplex)
_mem.name = mem.name.ljust(6)
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem, 'tx',
chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.sqlmode = 1
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
_mem.sqlmode = 1
self._set_dcs_index(_mem, 'rx',
chirp_common.ALL_DTCS_CODES.index(rxtone))
else:
_mem.sqlmode = 0
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
if mem.skip:
_skp |= bitpos
else:
_skp &= ~bitpos
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
def set_memory(self, mem):
_mem = self._get_raw_memory(mem.number)
if _mem is None:
LOG.debug('Need to expand zone %i' % self._zone)
# Calculate the new zone sizes and remap memory
new_zones = [x[1] for x in self._parent._zones]
new_zones[self._zone] = new_zones[self._zone] + 1
self._parent.expand_mmap(new_zones)
# Assign the new memory (at the end) to the desired
# number
_mem = self.raw_memories[self.raw_zoneinfo.count - 1]
_mem.number = mem.number
# Sort the memory into place
self.shuffle_zone()
# Now find it in the right spot
_mem = self._get_raw_memory(mem.number)
if _mem is None:
raise errors.RadioError('Internal error after '
'memory allocation')
# Default values for unknown things
_mem.unknown1[0] = 0x36
_mem.unknown1[1] = 0x36
_mem.unknown2 = [0xFF for i in range(0, 19)]
_mem.unknown3_1 = 0xF
_mem.unknown3_2 = 0x1
_mem.unknown3_3 = 0x0
_mem.unknown4 = 0xFF
if mem.empty:
LOG.debug('Need to shrink zone %i' % self._zone)
# Make the memory sort to the end, and sort the zone
_mem.number = 0xFF
self.shuffle_zone()
# Calculate the new zone sizes and remap memory
new_zones = [x[1] for x in self._parent._zones]
new_zones[self._zone] = new_zones[self._zone] - 1
self._parent.expand_mmap(new_zones)
return
_mem.name = mem.name[:12].encode().rstrip().ljust(12, b'\x00')
_mem.rx_freq = mem.freq // 10
txtone, rxtone = chirp_common.split_tone_encode(mem)
_mem.tx_tone = self._encode_tone(*txtone)
_mem.rx_tone = self._encode_tone(*rxtone)
_mem.wide = mem.mode == 'FM'
_mem.highpower = mem.power == POWER_LEVELS[1]
if mem.duplex == '':
_mem.tx_freq = mem.freq // 10
elif mem.duplex == 'split':
_mem.tx_freq = mem.offset // 10
elif mem.duplex == 'off':
_mem.tx_freq.set_raw(b'\xff\xff\xff\xff')
elif mem.duplex == '-':
_mem.tx_freq = (mem.freq - mem.offset) // 10
elif mem.duplex == '+':
_mem.tx_freq = (mem.freq + mem.offset) // 10
else:
raise errors.RadioError('Unsupported duplex mode %r' % mem.duplex)
skipbyte = self._memobj.skipflags[(mem.number - 1) // 8]
if mem.skip == 'S':
skipbyte |= (1 << (mem.number - 1) % 8)
else:
skipbyte &= ~(1 << (mem.number - 1) % 8)
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI"""
bitpos = (1 << (mem.number % 8))
bytepos = (mem.number / 8)
_mem = self._memory_obj()[mem.number]
_names = self._name_obj()[mem.number]
_scn = self._scan_obj()[bytepos]
_usd = self._used_obj()[bytepos]
if mem.empty:
_usd &= ~bitpos
_scn &= ~bitpos
_mem.set_raw("\xFF" * 16)
_names.name = ("\xFF" * 6)
return
else:
_usd |= bitpos
# frequency
_mem.rxfreq = mem.freq / 10
# duplex
if mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
for i in _mem.txfreq:
i.set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
else:
_mem.txfreq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.txtone, txmode, txtone, txpol)
self.encode_tone(_mem.rxtone, rxmode, rxtone, rxpol)
# name TAG of the channel
_names.name = mem.name.ljust(6, "\xFF")
# power level, # default power level is low
_mem.txp = 0 if mem.power is None else POWER_LEVELS.index(mem.power)
# wide/narrow
_mem.wn = MODES.index(mem.mode)
if mem.skip == "S":
_scn &= ~bitpos
else:
_scn |= bitpos
# autoset display to display name if filled
if mem.extra:
# mem.extra only seems to be populated when called from edit panel
dname = mem.extra["dname"]
else:
dname = None
if mem.name:
_mem.dname = True
if dname and not dname.changed():
dname.value = True
else:
_mem.dname = False
if dname and not dname.changed():
dname.value = False
# reseting unknowns, this has to be set by hand
_mem.unknown0 = 0
_mem.unknown1 = 0
_mem.unknown2 = 0
_mem.unknown3 = 0
# extra settings
if len(mem.extra) > 0:
# there are setting, parse
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
else:
# there are no extra settings, load defaults
_mem.bcl = 0
_mem.revert = 0
_mem.dname = 1
def _set_mem(self, **vals):
mem = chirp_common.Memory()
for key, value in vals.items():
setattr(mem, key, value)
return chirp_common.split_tone_encode(mem)
def _set_mem(self, **vals):
mem = chirp_common.Memory()
for key, value in vals.items():
setattr(mem, key, value)
return chirp_common.split_tone_encode(mem)
def set_memory(self, mem):
"""Set the memory data in the eeprom img from the UI"""
bitpos = (1 << (mem.number % 8))
bytepos = (mem.number / 8)
_mem = self._memory_obj()[mem.number]
_names = self._name_obj()[mem.number]
_scn = self._scan_obj()[bytepos]
_usd = self._used_obj()[bytepos]
if mem.empty:
_usd &= ~bitpos
_scn &= ~bitpos
_mem.set_raw("\xFF" * 16)
_names.name = ("\xFF" * 6)
return
else:
_usd |= bitpos
# frequency
_mem.rxfreq = mem.freq / 10
# duplex
if mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
elif mem.duplex == "off":
for i in _mem.txfreq:
i.set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
else:
_mem.txfreq = mem.freq / 10
# tone data
((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \
chirp_common.split_tone_encode(mem)
self.encode_tone(_mem.txtone, txmode, txtone, txpol)
self.encode_tone(_mem.rxtone, rxmode, rxtone, rxpol)
# name TAG of the channel
_names.name = mem.name.ljust(6, "\xFF")
# power level, # default power level is low
_mem.txp = 0 if mem.power is None else POWER_LEVELS.index(mem.power)
# wide/narrow
_mem.wn = MODES.index(mem.mode)
if mem.skip == "S":
_scn &= ~bitpos
else:
_scn |= bitpos
# autoset display to display name if filled
if mem.extra:
# mem.extra only seems to be populated when called from edit panel
dname = mem.extra["dname"]
else:
dname = None
if mem.name:
_mem.dname = True
if dname and not dname.changed():
dname.value = True
else:
_mem.dname = False
if dname and not dname.changed():
dname.value = False
# reseting unknowns, this has to be set by hand
_mem.unknown0 = 0
_mem.unknown1 = 0
_mem.unknown2 = 0
_mem.unknown3 = 0
# extra settings
if len(mem.extra) > 0:
# there are setting, parse
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
else:
# there are no extra settings, load defaults
_mem.bcl = 0
_mem.revert = 0
_mem.dname = 1
def set_memory(self, mem):
bitpos = (1 << (mem.number % 8))
bytepos = (mem.number / 8)
_mem = self._memobj.memory[mem.number]
_skp = self._memobj.skip_flags[bytepos]
_usd = self._memobj.used_flags[bytepos]
if mem.empty:
_usd |= bitpos
_skp |= bitpos
_mem.set_raw("\xFF" * 32)
return
_usd &= ~bitpos
if _mem.get_raw() == ("\xFF" * 32):
LOG.debug("Initializing empty memory")
_mem.set_raw("\x00" * 32)
_mem.squelch = 3
_mem.freq = mem.freq / 100
if mem.duplex == "off":
_mem.duplex = DUPLEXES.index("")
_mem.offset = 0
_mem.tx_off = True
elif mem.duplex == "split":
diff = mem.offset - mem.freq
_mem.duplex = DUPLEXES.index("-") if diff < 0 \
else DUPLEXES.index("+")
_mem.offset = abs(diff) / 100
else:
_mem.offset = mem.offset / 100
_mem.duplex = DUPLEXES.index(mem.duplex)
_mem.name = mem.name.ljust(6)
try:
_mem.channel_width = MODES.index(mem.mode)
except ValueError:
_mem.channel_width = 0
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
_mem.txtmode = TMODES.index(txmode)
_mem.rxtmode = TMODES.index(rxmode)
if txmode == "Tone":
_mem.txtone = TONES.index(txtone)
elif txmode == "DTCS":
self._set_dcs_index(_mem, 'tx',
chirp_common.ALL_DTCS_CODES.index(txtone))
if rxmode == "Tone":
_mem.sqlmode = 1
_mem.rxtone = TONES.index(rxtone)
elif rxmode == "DTCS":
_mem.sqlmode = 1
self._set_dcs_index(_mem, 'rx',
chirp_common.ALL_DTCS_CODES.index(rxtone))
else:
_mem.sqlmode = 0
_mem.txinv = txpol == "R"
_mem.rxinv = rxpol == "R"
if mem.skip:
_skp |= bitpos
else:
_skp &= ~bitpos
if mem.power:
_mem.power = POWER_LEVELS.index(mem.power)
else:
_mem.power = 0
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)
