def start(self):
"""Start main application"""
# pylint: disable=too-many-statements,too-many-branches,too-many-locals
_fixSocket()
adjustHalfOpenConnectionsLimit()
config = BMConfigParser()
daemon = config.safeGetBoolean('bitmessagesettings', 'daemon')
try:
opts, _ = getopt.getopt(
sys.argv[1:], "hcdt",
["help", "curses", "daemon", "test"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, _ in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = True
if os.path.isfile(os.path.join(
state.appdata, 'unittest.lock')):
daemon = True
state.enableGUI = False # run without a UI
# Fallback: in case when no api command was issued
state.last_api_response = time.time()
# Apply special settings
config.set(
'bitmessagesettings', 'apienabled', 'true')
config.set(
'bitmessagesettings', 'apiusername', 'username')
config.set(
'bitmessagesettings', 'apipassword', 'password')
config.set(
'bitmessagesettings', 'apinotifypath',
os.path.join(app_dir, 'tests', 'apinotify_handler.py')
)
if daemon:
state.enableGUI = False # run without a UI
if state.enableGUI and not state.curses and not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.'
)
# is the application already running? If yes then exit.
state.thisapp = singleinstance("", daemon)
if daemon:
with printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
set_thread_name("PyBitmessage")
state.dandelion = config.safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them,
# stem objects will get stuck forever
if state.dandelion and not config.safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
if state.testmode or config.safeGetBoolean(
'bitmessagesettings', 'extralowdifficulty'):
defaults.networkDefaultProofOfWorkNonceTrialsPerByte = int(
defaults.networkDefaultProofOfWorkNonceTrialsPerByte / 100)
defaults.networkDefaultPayloadLengthExtraBytes = int(
defaults.networkDefaultPayloadLengthExtraBytes / 100)
readKnownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
# close the main program even if there are threads left
addressGeneratorThread.daemon = True
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
# close the main program even if there are threads left
singleWorkerThread.daemon = True
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
# DON'T close the main program even if there are threads left.
# The closeEvent should command this thread to exit gracefully.
sqlLookup.daemon = False
sqlLookup.start()
Inventory() # init
# init, needs to be early because other thread may access it early
Dandelion()
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and config.safeGet(
'bitmessagesettings', 'smtpdeliver', '') != '':
from class_smtpDeliver import smtpDeliver
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and config.safeGetBoolean(
'bitmessagesettings', 'smtpd'):
from class_smtpServer import smtpServer
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
# DON'T close the main program even the thread remains.
# This thread checks the shutdown variable after processing
# each object.
objectProcessorThread.daemon = False
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
# close the main program even if there are threads left
singleCleanerThread.daemon = True
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if config.safeGetBoolean('bitmessagesettings', 'apienabled'):
import api # pylint: disable=relative-import
singleAPIThread = api.singleAPI()
# close the main program even if there are threads left
singleAPIThread.daemon = True
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
start_proxyconfig()
BMConnectionPool().connectToStream(1)
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(config.getint('threads', 'receive')):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
state.uploadThread = UploadThread()
state.uploadThread.daemon = True
state.uploadThread.start()
if config.safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if not daemon and state.enableGUI:
if state.curses:
if not depends.check_curses():
sys.exit()
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
elif state.kivy:
config.remove_option('bitmessagesettings', 'dontconnect')
from bitmessagekivy.mpybit import NavigateApp
NavigateApp().run()
else:
import bitmessageqt
bitmessageqt.run()
else:
config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
time.sleep(1)
if (
state.testmode
and time.time() - state.last_api_response >= 30
):
self.stop()
elif not state.enableGUI:
state.enableGUI = True
# pylint: disable=relative-import
from tests import core as test_core
test_core_result = test_core.run()
state.enableGUI = True
self.stop()
test_core.cleanup()
sys.exit(
'Core tests failed!'
if test_core_result.errors or test_core_result.failures
else 0
)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings',
'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcd",
["help", "curses", "daemon"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them, stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion(
) # init, needs to be early because other thread may access it early
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings",
"smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings',
'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcdt",
["help", "curses", "daemon", "test"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = True
if os.path.isfile(os.path.join(state.appdata,
'unittest.lock')):
daemon = True
state.enableGUI = False # run without a UI
# Fallback: in case when no api command was issued
state.last_api_response = datetime.now()
# Apply special settings
config = BMConfigParser()
config.set('bitmessagesettings', 'apienabled', 'true')
config.set('bitmessagesettings', 'apiusername', 'username')
config.set('bitmessagesettings', 'apipassword', 'password')
config.set(
'bitmessagesettings', 'apinotifypath',
os.path.join(app_dir, 'tests', 'apinotify_handler.py'))
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them, stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
helper_bootstrap.knownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion(
) # init, needs to be early because other thread may access it early
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean(
"bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if BMConfigParser().safeGetBoolean('bitmessagesettings',
'apienabled'):
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if daemon is False and state.enableGUI: # FIXME redundant?
if state.curses is False:
if not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.')
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
if state.testmode and 30 <= \
(datetime.now() - state.last_api_response).seconds:
self.stop()
elif not state.enableGUI:
from tests import core
test_core_result = core.run()
state.enableGUI = True
self.stop()
sys.exit('Core tests failed!' if test_core_result.errors
or test_core_result.failures else 0)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# get curses flag
if '-c' in sys.argv:
state.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings",
"smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
while True:
time.sleep(20)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon')
try:
opts, args = getopt.getopt(
sys.argv[1:], "hcdtsa",
["help", "curses", "daemon", "test", "apitest"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-a", "--apitest"):
from bmsxmlrpc.server import TestAPIThread
server = TestAPIThread()
server.start()
# is the application already running? If yes then exit.
if state.enableGUI and not state.curses and not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.'
)
shared.thisapp = singleinstance("", daemon)
if daemon and not state.testmode:
with shared.printLock:
logger.warn('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them,
# stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
knownnodes.readKnownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
# close the main program even if there are threads left
addressGeneratorThread.daemon = True
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
# close the main program even if there are threads left
singleWorkerThread.daemon = True
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
# DON'T close the main program even if there are threads left.
# The closeEvent should command this thread to exit gracefully.
sqlLookup.daemon = False
sqlLookup.start()
Inventory() # init
# init, needs to be early because other thread may access it early
Dandelion()
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and BMConfigParser().safeGet(
"bitmessagesettings", "smtpdeliver", '') != '':
from class_smtpDeliver import smtpDeliver
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean(
"bitmessagesettings", "smtpd"):
from class_smtpServer import smtpServer
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
# DON'T close the main program even the thread remains.
# This thread checks the shutdown variable after processing
# each object.
objectProcessorThread.daemon = False
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
# close the main program even if there are threads left
singleCleanerThread.daemon = True
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
from bmsxmlrpc.server import singleAPI
singleAPIThread = singleAPI()
# close the main program even if there are threads left
singleAPIThread.daemon = True
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if not daemon and state.enableGUI:
if state.curses:
if not depends.check_curses():
sys.exit()
logger.info('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
elif state.kivy:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
from bitmessagekivy.mpybit import NavigateApp
NavigateApp().run()
else:
import bitmessageqt
bitmessageqt.run()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
if state.testmode:
sleep(30)
# make testing
self.stop()
while state.shutdown == 0:
sleep(1)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcd",
["help", "curses", "daemon"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
shared.daemon = daemon
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion() # init, needs to be early because other thread may access it early
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# get curses flag
shared.curses = False
if '-c' in sys.argv:
shared.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleton.singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# SMTP delivery thread
if daemon and shared.safeConfigGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and shared.safeConfigGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if shared.safeConfigGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if shared.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
while True:
time.sleep(20)