def runBridgeTests(RMList, num_slots, num_tests, verbosity=0):
print '\n\nBRIDGE TEST\n\n'
total_passed = 0
total_failed = 0
total_neither = 0
total_number_tests = num_slots * num_tests
total_test_list = [total_passed, total_failed, total_neither]
for rm in RMList:
t.openRM(rm)
print '\n-------------------- Test RM: '+str(rm)+' --------------------'
for slot in xrange(num_slots):
b.write(0x00,[0x06])
print '\n-------------------- Test Slot: '+str(slot)+' --------------------'
test_list = bridgeTests(slot,num_tests)
total_test_list = map(add, total_test_list, test_list)
daisyChain = q.qCard(webBus("pi5",0), q.QIEi2c[slot])
print '\n~~~~~~~~~~ QIE Daisy Chain ~~~~~~~~~~'
print str(daisyChain)
if verbosity:
print '\nNumber passed = '+str(test_list[0])
print 'Number failed = '+str(test_list[1])
print 'Number neither pass nor fail = '+str(test_list[2])+'\n'
# Print Final Test Results for Bridge FPGA
print '\n\n######## Final Test Results ########\n'
print 'Total Number of Tests = '+str(total_number_tests)
print 'Number passed = '+str(total_test_list[0])
print 'Number failed = '+str(total_test_list[1])
print 'Number neither pass nor fail = '+str(total_test_list[2])
print 'Check total number of tests: '+str(total_number_tests == sum(total_test_list))+'\n'
def runBridgeTests(RMList, num_slots, num_tests, verbosity=0):
print '\n\nBRIDGE TEST\n\n'
total_passed = 0
total_failed = 0
total_neither = 0
total_number_tests = num_slots * num_tests
total_test_list = [total_passed, total_failed, total_neither]
for rm in RMList:
t.openRM(rm)
print '\n-------------------- Test RM: ' + str(
rm) + ' --------------------'
for slot in xrange(num_slots):
b.write(0x00, [0x06])
print '\n-------------------- Test Slot: ' + str(
slot) + ' --------------------'
test_list = bridgeTests(slot, num_tests)
total_test_list = map(add, total_test_list, test_list)
daisyChain = q.qCard(webBus("pi5", 0), q.QIEi2c[slot])
print '\n~~~~~~~~~~ QIE Daisy Chain ~~~~~~~~~~'
print str(daisyChain)
if verbosity:
print '\nNumber passed = ' + str(test_list[0])
print 'Number failed = ' + str(test_list[1])
print 'Number neither pass nor fail = ' + str(
test_list[2]) + '\n'
# Print Final Test Results for Bridge FPGA
print '\n\n######## Final Test Results ########\n'
print 'Total Number of Tests = ' + str(total_number_tests)
print 'Number passed = ' + str(total_test_list[0])
print 'Number failed = ' + str(total_test_list[1])
print 'Number neither pass nor fail = ' + str(total_test_list[2])
print 'Check total number of tests: ' + str(
total_number_tests == sum(total_test_list)) + '\n'
def powerResetPress(self): b = webBus(self.piChoiceVar.get(),0) for i in [1,2]: b.write(0x72,[i]) b.write(0x74,[0x08]) b.write(0x70,[0x08,0]) b.sendBatch() print '\n\nPower Reset Completed!\n\n'
def powerResetPress(self):
b = webBus(self.piChoiceVar.get(), 0)
for i in [1, 2]:
b.write(0x72, [i])
b.write(0x74, [0x08])
b.write(0x70, [0x08, 0])
b.sendBatch()
print '\n\nPower Reset Completed!\n\n'
def __init__(self, activeSlots, summaryList, suiteSelection, piAddress,
iterations, uHTR_slots, user, overwrite):
'''Create a test stand object filled with necessary RMs, cards'''
self.bus = webBus(piAddress, 0)
self.suiteSelection = suiteSelection
self.iters = iterations
self.uHTR_slots = uHTR_slots
self.user = user
self.filename = sys.stdout.name # For loggerclass use
self.backupStdout = sys.stdout
self.overwrite = overwrite
self.timeString = "{:%b%d%Y_%H%M%S}".format(datetime.now())
self.activeSlots = activeSlots
self.RMs = []
RM4_active = []
RM3_active = []
RM2_active = []
RM1_active = []
# Split the memory locations for summaries up based on what
# RM slot they correspond to.
RM4_summaries = summaryList[0:4]
RM3_summaries = summaryList[4:8]
RM2_summaries = summaryList[8:12]
RM1_summaries = summaryList[12:16]
for slot in self.activeSlots:
if slot in [2, 3, 4, 5]:
#RM4
RM4_active.append(slot)
elif slot in [7, 8, 9, 10]:
#RM3
RM3_active.append(slot)
elif slot in [18, 19, 20, 21]:
#RM2
RM2_active.append(slot)
elif slot in [23, 24, 25, 26]:
#RM1
RM1_active.append(slot)
#initialize RMs
print '--- Determining which slots contain active cards ---\n'
self.RMs.append(RM.RM(1, RM1_active, RM1_summaries, self.bus))
self.RMs.append(RM.RM(2, RM2_active, RM2_summaries, self.bus))
self.RMs.append(RM.RM(3, RM3_active, RM3_summaries, self.bus))
self.RMs.append(RM.RM(4, RM4_active, RM4_summaries, self.bus))
print '\n--- Slot determination finished. Beginning tests ---\n\n'
def __init__(self, activeSlots, summaryList, suiteSelection, piAddress, iterations, uHTR_slots, user, overwrite):
'''Create a test stand object filled with necessary RMs, cards'''
self.bus = webBus(piAddress, 0)
self.suiteSelection = suiteSelection
self.iters = iterations
self.uHTR_slots = uHTR_slots
self.user = user
self.filename = sys.stdout.name # For loggerclass use
self.backupStdout = sys.stdout
self.overwrite = overwrite
self.timeString = "{:%b%d%Y_%H%M%S}".format(datetime.now())
self.activeSlots = activeSlots
self.RMs = []
RM4_active = []
RM3_active = []
RM2_active = []
RM1_active = []
# Split the memory locations for summaries up based on what
# RM slot they correspond to.
RM4_summaries = summaryList[0:4]
RM3_summaries = summaryList[4:8]
RM2_summaries = summaryList[8:12]
RM1_summaries = summaryList[12:16]
for slot in self.activeSlots:
if slot in [2,3,4,5]:
#RM4
RM4_active.append(slot)
elif slot in [7,8,9,10]:
#RM3
RM3_active.append(slot)
elif slot in [18,19,20,21]:
#RM2
RM2_active.append(slot)
elif slot in [23,24,25,26]:
#RM1
RM1_active.append(slot)
#initialize RMs
print '--- Determining which slots contain active cards ---\n'
self.RMs.append(RM.RM(1, RM1_active, RM1_summaries, self.bus))
self.RMs.append(RM.RM(2, RM2_active, RM2_summaries, self.bus))
self.RMs.append(RM.RM(3, RM3_active, RM3_summaries, self.bus))
self.RMs.append(RM.RM(4, RM4_active, RM4_summaries, self.bus))
print '\n--- Slot determination finished. Beginning tests ---\n\n'
def magicResetPress(self):
b = webBus(self.piChoiceVar.get(), 0)
for ngccm in [1, 2]: #both ngccm
b.write(0x72, [ngccm])
b.write(0x74, [0x08]) # PCA9538 is bit 3 on ngccm mux
#power on and reset
#register 3 is control reg for i/o modes
b.write(0x70, [0x03, 0x00]) # sets all GPIO pins to 'output' mode
b.write(0x70, [0x01, 0x00])
b.write(0x70, [0x01, 0x08])
b.write(0x70, [0x01, 0x18]) # GPIO reset is 10
b.write(0x70, [0x01, 0x08])
batch = b.sendBatch()
print 'initial = ' + str(batch)
print '\n\nMagic reset completed!\n\n'
for j in range(2):
self.qie_magicButton.flash()
def magicResetPress(self): b = webBus(self.piChoiceVar.get(),0) for ngccm in [1,2]: #both ngccm b.write(0x72,[ngccm]) b.write(0x74,[0x08]) # PCA9538 is bit 3 on ngccm mux #power on and reset #register 3 is control reg for i/o modes b.write(0x70,[0x03,0x00]) # sets all GPIO pins to 'output' mode b.write(0x70,[0x01,0x00]) b.write(0x70,[0x01,0x08]) b.write(0x70,[0x01,0x18]) # GPIO reset is 10 b.write(0x70,[0x01,0x08]) batch = b.sendBatch() print 'initial = '+str(batch) print '\n\nMagic reset completed!\n\n' for j in range(2): self.qie_magicButton.flash()
def __init__(self, activeSlots, summaryList, suiteSelection, piAddress, iterations):
'''Create a test stand object filled with necessary RMs, cards'''
self.bus = webBus(piAddress, 0)
self.suiteSelection = suiteSelection
self.iters = iterations
self.activeSlots = activeSlots
self.RMs = []
RM4_active = []
RM3_active = []
RM2_active = []
RM1_active = []
RM4_summaries = summaryList[0:4]
RM3_summaries = summaryList[4:8]
RM2_summaries = summaryList[8:12]
RM1_summaries = summaryList[12:16]
for slot in self.activeSlots:
if slot in [2,3,4,5]:
#RM4
RM4_active.append(slot)
elif slot in [7,8,9,10]:
#RM3
RM3_active.append(slot)
elif slot in [18,19,20,21]:
#RM2
RM2_active.append(slot)
elif slot in [23,24,25,26]:
#RM1
RM1_active.append(slot)
#initialize RMs
print "--- Determining which slots contain active cards ---\n"
self.RMs.append(RM.RM(1, RM1_active, RM1_summaries, self.bus))
self.RMs.append(RM.RM(2, RM2_active, RM2_summaries, self.bus))
self.RMs.append(RM.RM(3, RM3_active, RM3_summaries, self.bus))
self.RMs.append(RM.RM(4, RM4_active, RM4_summaries, self.bus))
print "\n--- Slot determination finished. Beginning tests ---\n\n"
'''
Goals:
* understand the "spy" register (probably the 200-bit one)
* try to write to a "read only" register and ensure that it didn't work
* but first, read what's there so that in case you overwrite, you can undo your mistakes...
* understand the SERDES registers (see Microsemi documentation for meanings)
* create functions to read (and if possible) write to internal registers
'''
import sys
sys.path.append('../')
from client import webBus
import QIELib
b = webBus("pi5",0) #can add "pi5,0" so won't print send/receive messages
q = QIELib
##############################
# Conversion Functions
##############################
#give this function a string (like '133 4 92 23') and returns the binary cat
def strToBin(aString):
j = 0
catBinary = ""
for i in aString.split():
catBinary = catBinary + format(int(aString.split()[j]),'08b')
j += 1
return catBinary
# helpful string to hex list
def strToHex(string):
from client import webBus
from operator import add
import TestLib as t
import QIELib as q
b = webBus("pi6",0)
# Read from Igloo
def readIgloo(slot, address, num_bytes):
b.write(0x00,[0x06])
b.write(t.bridgeAddress(slot),[0x11,0x03,0,0,0])
b.write(0x09,[address])
b.read(0x09, num_bytes)
message = b.sendBatch()[-1]
return t.reverseBytes(message)
# Write to Igloo
def writeIgloo(rm,slot,address,messageList):
t.openRM(b,rm)
b.write(0x00,[0x06])
b.write(t.bridgeAddress(slot),[0x11,0x03,0,0,0])
b.write(0x09,[address] + messageList)
message = b.sendBatch()[-1]
return t.reverseBytes(message)
# Adry's open Igloo function
def openIgloo(rm,slot):
t.openRM(b,rm)
#the igloo is value "3" in I2C_SELECT table
b.write(t.bridgeAddress(slot),[0x11,0x03,0,0,0])
b.sendBatch()
def qie_resetPress(self):
# Instantiate a webBus member:
b = webBus(self.piChoiceVar.get(), 0)
b.write(0x00, [0x06])
b.sendBatch()
print '\n\nBackplane for ' + self.piChoiceVar.get() + ' reset!\n\n'
def __init__(self, webAddress, address):
'''create a new test suite object... initialize bus and address'''
self.bus = client.webBus(webAddress, 0)
self.address = address
self.outCard = testSummary()
from client import webBus
import vttxLib
import TestSoftware.Hardware as Hardware
h = Hardware
b = webBus('pi5',0) #can add 'pi5,0' so won't print send/receive messages
v = vttxLib
slot = 18 # the J_# slot
class Test:
def __init__(self, bus, address, logfile, iterations = 1):
self.bus = bus
self.address = address
self.logstream = logfile #changed from logstream to logfile
self.iterations = iterations
def run(self):
passes = 0
for i in xrange(self.iterations): #changed from iterations to self.iterations
if self.testBody() == True: passes += 1 #changed true to True
return (passes, self.iterations - passes) #changed fails to (self.iterations - passes)
def log(self, message):
logprint(message, file=self.logfile)
def testBody(self):
return True
# ------------------------------------------------------------------------
class VTTX_Display(Test):
def testBody(self):
print '----------VTTX_Display----------'
def qie_resetPress(self): # Instantiate a webBus member: b = webBus(self.piChoiceVar.get(),0) b.write(0x00,[0x06]) b.sendBatch() print '\n\nBackplane for '+self.piChoiceVar.get()+' reset!\n\n'
import IglooLib_adry as i
import Hardware as h
from client import webBus
import helpers
import time
# i = IglooLib_adry
bus = webBus('pi5', 0)
slot = 2 # the J_# slot
class Test:
def __init__(self, bus, address, logfile, iterations=1):
self.bus = bus
self.address = address
self.logstream = logfile
self.iterations = iterations
def run(self):
passes = 0
for i in xrange(self.iterations):
if self.testBody() == True: passes += 1
return (passes, self.iterations - passes)
def log(self, message):
logprint(message, file=self.logfile)
def testBody(self):
return True
from client import webBus
import collections
from checksumClass import Checksum
# bus = webBus("pi5",0)
bus = webBus("pi7",0)
# binDataHappy = '0 01110000 00111100 10000011'
# intDataHappy = '0 112 60 131'
# value = 28732
# Set last two bits of LSB to 0 (these are status bits).
# message = '0 01100011 01010010 01100100'
# 0110'0011'0101'0000 = 25424.
# Trigger T measurement hold master 1110'0011 0xE3
# Trigger RH measurement hold master 1110'0101 0xE5
# Trigger T measurement no hold master 1111'0011 0xF3
# Trigger RH measurement no hold master 1111'0101 0xF5
def reverse(message):
mlist = message.split()
error = mlist.pop(0)
mlist.reverse()
return error + " " + " ".join(mlist)
def getValue(message):
value = ''
mList = message.split()
mList = mList[1:-1]
for byte in xrange(len(mList)):
initialByte = bin(int(mList[byte]))[2:]
import sys
sys.path.append("../")
from client import webBus
pi = sys.args[1]
bus = webBus(pi,0)
from client import webBus
b = webBus("pi6",0)
######################################################
# VTTX Dict
######################################################
# size is in BYTES
vttx = {
"i2c_select" : {
1 : [0x01, 0,0,0],
2 : [0x02, 0,0,0]
},
"address" : 0x7E,
"size" : 7 #size of register in bytes
}
######################################################
# Helpful tool functions
######################################################
def isError(ret):
if (ret[0] != 0): # '0' is non-error value
return True # error
else:
return False # no error
# helpful string decimal to string hex
def strToHex(string):
catBinary = ""
j=0
# Check Checsum!!
from checksumClass import Checksum
from uniqueIDClass import ID
import TestLib as t
from client import webBus
bus6 = webBus("pi6", 0)
def check(bus, rmList, slotList):
for rm in rmList:
t.openRM(bus, rm)
for slot in slotList[4 - rm]:
print '\nUnique ID'
uniqueID = ID(bus, slot)
print uniqueID.raw
print uniqueID.cooked
check = Checksum(uniqueID.raw, 0)
print 'result = ', check.result
if check.result == 2:
print 'i2c error'
if check.result == 1:
print 'checksum error'
if check.result == 0:
print 'checksum ok'
# idA = ID(bus6)
# idB = ID(bus6)
# t.openRM(bus6,2)
#
import IglooLib_adry as i
import Hardware as h
from client import webBus
import helpers
import time
# i = IglooLib_adry
bus = webBus('pi5',0)
slot = 2 # the J_# slot
class Test:
def __init__(self, bus, address, logfile, iterations = 1):
self.bus = bus
self.address = address
self.logstream = logfile
self.iterations = iterations
def run(self):
passes = 0
for i in xrange(self.iterations):
if self.testBody() == True: passes += 1
return (passes, self.iterations - passes)
def log(self, message):
logprint(message, file=self.logfile)
def testBody(self):
return True
# ------------------------------------------------------------------------
class fpgaMajVer(Test): #inherit from Test class, overload testBody() function
def testBody(self):
name = "fpgaMajVer"
# Daisy chain objects must use .write() after changes are made in order to affect chips
##### Imports #####
import sys
sys.path.append("../")
from client import webBus
import Hardware as h
import iglooClass_adry as i
from uniqueID import ID
# from uHTR import uHTR
##### Global Vars #####
pi = "pi5" # 'pi5' or 'pi6' etc
b = webBus(pi,0) # webBus sets active pi; 0 = server verbosity off
all_slots = [2,3,4,5,7,8,9,10,18,19,20,21,23,24,25,26]
slots = all_slots # list of active J slots
##### Functions ######
def chargeInjectOn(slots, bus):
for slot in slots:
h.SetQInjMode(1, slot, b)
i.displayCI(bus,slot)
def chargeInjectOff(slots, bus):
for slot in slots:
h.SetQInjMode(0, slot, b)
i.displayCI(bus,slot)
# Run complete QIE Test Sweet
from client import webBus
import uniqueID
import TestLib
b = webBus("pi5")
u = uniqueID
t = TestLib
def run(RMList, num_slots=4):
uniqueIDArray = []
# Iterate through RM 0, 1, 2, 3 (include desired RMs in list)
for rm in RMList:
idList = []
# Iterate through Slot 0, 1, 2, 3 (run for all 4 slots by default)
for slot in xrange(num_slots):
idList.append(u.uniqueID(rm, slot))
# b.clearBus()
uniqueIDArray.append(idList)
return uniqueIDArray
### Outdated, not used now! ###
def printRun(RMList, num_slots=4):
uniqueIDArray = run(RMList, num_slots)
for rm in RMList:
for slot in xrange(num_slots):
print 'RM: ', rm, ' slot: ', slot
print 'UniqueID (dec): ', t.reverseBytes(uniqueIDArray[rm][slot])
print 'UniqueID (hex): ', t.toHex(
t.reverseBytes(uniqueIDArray[rm][slot]))
from client import webBus
import collections
from Checksum import Check
bus = webBus("pi5",0)
#bus = webBus("pi6",0)
# binDataHappy = '0 01110000 00111100 10000011'
# intDataHappy = '0 112 60 131'
# value = 28732
# Set last two bits of LSB to 0 (these are status bits).
# message = '0 01100011 01010010 01100100'
# 0110'0011'0101'0000 = 25424.
# Trigger T measurement hold master 1110'0011 0xE3
# Trigger RH measurement hold master 1110'0101 0xE5
# Trigger T measurement no hold master 1111'0011 0xF3
# Trigger RH measurement no hold master 1111'0101 0xF5
def reverse(message):
mlist = message.split()
error = mlist.pop(0)
mlist.reverse()
return error + " " + " ".join(mlist)
def getValue(message):
value = ''
mList = message.split()
mList = mList[1:-1]
for byte in xrange(len(mList)):
initialByte = bin(int(mList[byte]))[2:]
from client import webBus
import collections
import time
import TestLib as t
from checksumClass import Checksum
bus = webBus("pi6",0)
# binDataHappy = '0 01110000 00111100 10000011'
# intDataHappy = '0 112 60 131'
# value = 28732
# Set last two bits of LSB to 0 (these are status bits).
# message = '0 01100011 01010010 01100100'
# 0110'0011'0101'0000 = 25424.
# Trigger T measurement hold master 1110'0011 0xE3
# Trigger RH measurement hold master 1110'0101 0xE5
# Trigger T measurement no hold master 1111'0011 0xF3
# Trigger RH measurement no hold master 1111'0101 0xF5
def reverse(message):
mlist = message.split()
error = mlist.pop(0)
mlist.reverse()
return error + " " + " ".join(mlist)
def getValue(message):
value = ''
mList = message.split()
mList = mList[1:-1]
for byte in xrange(len(mList)):
def __init__(self, parent):
# Create a webBus instance
self.myBus = client.webBus("pi7",0)
# Create a permanent address of QCard
self.address = 0x19
# Create an instance of initialTests
self.initialTest = initialTests()
# Create an instance of cardInformation
self.cardInfo = cardInformation()
# Read info from left side?
self.readFromList = True
# Make an empty list that will eventually contain all of
# the active card slots
self.outSlotNumbers = []
# Name the parent. This is mostly for bookkeeping purposes
# and doesn't really get used too much.
self.myParent = parent
# Make a placeholder for the shortened unique ID
self.uniqueIDPass = ""
self.nameChoiceVar = StringVar()
self.gpioChoiceVar = StringVar()
self.infoCommentVar = StringVar()
self.barcodeEntry = StringVar()
self.uniqueIDEntry = StringVar()
self.tempEntry = StringVar()
self.firmwareVerEntry = StringVar()
self.firmwareVerMinEntry = StringVar()
self.firmwareVerOtherEntry = StringVar()
self.iglooToggleEntry = StringVar()
self.iglooMajVerEntry = StringVar()
self.iglooMinVerEntry = StringVar()
self.overwriteVar = IntVar()
# Place an all-encompassing frame in the parent window. All of the following
# frames will be placed here (topMost_frame) and not in the parent window.
self.topMost_frame = Frame(parent)
self.topMost_frame.pack()
#----- constants for controlling layout
button_width = 6
button_padx = "2m"
button_pady = "1m"
frame_padx = "3m"
frame_pady = "2m"
frame_ipadx = "3m"
frame_ipady = "1m"
#---------- end layout constants ------
##########################################
### ###
### BEGIN MAKING SUB-FRAMES ###
### ###
##########################################
# Make and pack a sub-frame within topMost_frame that will contain
# all of the controls for non-hardware related test information
# (i.e. name of tester)
self.info_frame = Frame(
self.topMost_frame,
borderwidth=5, relief=RIDGE,
height=50,
background="white",
)
self.info_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make a top half-frame
self.topHalf_frame = Frame(self.topMost_frame)
self.topHalf_frame.pack(side=TOP)
# Make a frame for containing an experiment diagram
self.experiment_frame = Frame(
self.topHalf_frame,
borderwidth=5, relief=RIDGE,
height=580, width=300,
background="white"
)
self.experiment_frame.pack_propagate=(False)
self.experiment_frame.pack(
side=RIGHT,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make a label for the entire right frame
self.experi_rightFrame = Frame(
self.topHalf_frame,
borderwidth=5, relief=RIDGE,
height=580, width=300,
background="white"
)
self.experi_rightFrame.pack_propagatte=(False)
self.experi_rightFrame.pack(
side=LEFT,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
##########################################
### ###
### BEGIN MAKING WIDGETS ###
### ###
##########################################
######################################
##### #####
##### Widgets in info frame #####
##### #####
######################################
# Make and pack a text label for name selector
self.info_Label = Label(self.info_frame, text="Testing Information/Parameters")
self.info_Label.configure(
padx=button_padx,
pady=button_pady,
background="white"
)
self.info_Label.pack(side=TOP)
# Make a sub-sub-frame within the frame to hold another label and a dropdown box
self.info_subTop_frame = Frame(self.info_frame,background="white")
self.info_subTop_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make a sub-sub-frame within the frame to hold comment box
self.info_subBot_frame = Frame(self.info_frame,background="white")
self.info_subBot_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make a label for the name drop-down:
self.info_nameLabel = Label(self.info_subTop_frame, text="Tester Name: ")
self.info_nameLabel.configure(
padx=button_padx,
pady=button_pady,
background="white"
)
self.info_nameLabel.pack(side=LEFT)
# Make and pack a listbox to pick which QIE card to talk to:
self.info_nameBox = OptionMenu(self.info_subTop_frame, self.nameChoiceVar,
"Shaun Hogan","Caleb Smith","Adryanna Smith","Jordan Potarf",
"John Lawrence","Andrew Baas","Mason Dorseth","Josh Hiltbrand")
self.info_nameBox.pack(side=LEFT)
self.nameChoiceVar.set("Choose Name") # initializes the OptionMenu
# Make a label for the name drop-down:
self.info_commentLabel = Label(self.info_subBot_frame, text="User Testing Comments: ")
self.info_commentLabel.configure(
padx=button_padx,
pady=button_pady,
background="white"
)
self.info_commentLabel.pack(side=LEFT)
# Make a entrybox for testing comments
self.info_commentBox = Entry(
self.info_subBot_frame,
textvariable=self.infoCommentVar
)
self.info_commentBox.pack(side=LEFT)
######################################
##### #####
##### Experiment Setup Frames #####
##### #####
######################################
self.testLabelList = ["Res_1","Res_2","Res_3","Res_4",
"Res_5","Res_6","Res_7","Res_8",
"Res_9","Res_10","Res_11", "Res_12",
"Res_13", "Res_14", "Res_15", "SuplCur", "Vis", "Program",
"Res_16"]
# Make a label for the entire left frame
self.experi_subFrame_lbl = Label(self.experiment_frame,text="QIE Card Setup & Parameters")
self.experi_subFrame_lbl.configure(
padx=button_padx,
pady=button_pady,
background="white"
)
self.experi_subFrame_lbl.pack(side=TOP)
# Make top 2_7 subframe
self.experi_subTop2_7_frame = Frame(self.experiment_frame, bg="white")
self.experi_subTop2_7_frame.pack(
side=TOP,
ipadx=frame_ipadx, padx=frame_padx,
ipady=frame_ipady, pady=frame_pady,
)
# Make top 2_8 subframe
self.experi_subTop2_8_frame = Frame(self.experiment_frame, bg="white")
self.experi_subTop2_8_frame.pack(
side=TOP,
ipadx=frame_ipadx, padx=frame_padx,
ipady=frame_ipady, pady=frame_pady,
)
# Make top 2_6 subframe
self.experi_subTop2_6_frame = Frame(self.experiment_frame, bg="white")
self.experi_subTop2_6_frame.pack(
side=TOP,
ipadx=frame_ipadx, padx=frame_padx,
ipady=frame_ipady, pady=frame_pady,
)
# Make top 2 subframe
self.experi_subTop2_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_0 subframe
self.experi_subTop2_0_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_0_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_1 subframe
self.experi_subTop2_1_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_1_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_2 subframe
self.experi_subTop2_2_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_2_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_3 subframe
self.experi_subTop2_3_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_3_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_4 subframe
self.experi_subTop2_4_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_4_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_4_5 subframe
self.experi_subTop2_4_5_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_4_5_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_4_6 subframe
self.experi_subTop_2_4_6_frame = Frame(self.experiment_frame, background="white")
self.experi_subTop_2_4_6_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
# Make top 2_5 subframe
self.experi_subTop2_5_frame = Frame(self.experiment_frame,background="white")
self.experi_subTop2_5_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
pady=frame_pady
)
###################################
### ###
### Subframes on right side ###
### ###
###################################
# Make a buffer frame
self.experi_subTopBuffer_frame = Frame(self.experi_rightFrame,bg="white")
self.experi_subTopBuffer_frame.pack(
side=TOP,
ipady=frame_ipady,
ipadx=frame_ipadx,
padx=frame_padx,
pady=frame_pady
)
# Make an "inspections and tests" label
self.experi_inspections_label = Label(self.experi_subTopBuffer_frame,
text="Inspections and Tests")
self.experi_inspections_label.configure(bg="white")
self.experi_inspections_label.pack()
# Make a subframe for the barcode box
self.experi_barcode_frame = Frame(self.experi_rightFrame, bg="white")
self.experi_barcode_frame.pack(
side=TOP,
ipady=frame_ipady,
ipadx=frame_ipadx,
padx=frame_padx,
pady=frame_pady
)
# Make a label for the Barcode entry
self.experi_barcode_lbl = Label(self.experi_barcode_frame, text="Barcode: ")
self.experi_barcode_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_barcode_lbl.pack(side=LEFT)
# Make an entry box for the barcode
# Make a entrybox for testing comments
self.experi_barcode_entry = Entry(
self.experi_barcode_frame,
textvariable=self.barcodeEntry
)
self.experi_barcode_entry.pack(side=RIGHT)
# Make another buffer frame
self.experi_subTopBuffer2_frame = Frame(self.experi_rightFrame,bg="white")
self.experi_subTopBuffer2_frame.pack(
side=TOP,
ipady=frame_ipady,
ipadx=frame_ipadx,
padx=frame_padx,
pady=frame_pady
)
# Make top 3 subframe
self.experi_subTop3_frame = Frame(self.experi_rightFrame,background="white")
self.experi_subTop3_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
)
# Make top 3 subframe for text
self.experi_subTop3_fText = Frame(self.experi_rightFrame,background="white")
self.experi_subTop3_fText.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
padx=frame_padx,
)
# Make top 4 subframe
self.experi_subTop4_frame = Frame(self.experi_rightFrame,background="white")
self.experi_subTop4_frame.pack(
side=TOP,
ipadx=frame_ipadx,
padx=frame_padx,
)
# Make top 4 subframe for text
self.experi_subTop4_fText = Frame(self.experi_rightFrame,background="white")
self.experi_subTop4_fText.pack(
side=TOP,
ipadx=frame_ipadx,
padx=frame_padx,
)
# Make top 5 subframe
self.experi_subTop5_frame = Frame(self.experi_rightFrame,background="white")
self.experi_subTop5_frame.pack(
side=TOP,
ipadx=frame_ipadx,
padx=frame_padx,
)
# Make top 5 subframe for text
self.experi_subTop5_fText = Frame(self.experi_rightFrame,background="white")
self.experi_subTop5_fText.pack(
side=TOP,
ipadx=frame_ipadx,
padx=frame_padx,
)
# Make top 6 subframe
self.experi_subTop6_frame = Frame(self.experi_rightFrame,background="white")
self.experi_subTop6_frame.pack(
side=TOP,
ipadx=frame_ipadx,
padx=frame_padx,
)
# Make top 6 subframe for text
self.experi_subTop6_fText = Frame(self.experi_rightFrame,background="white")
self.experi_subTop6_fText.pack(
side=TOP,
ipadx=frame_ipadx,
padx=frame_padx,
)
# Make top 7 subframe
self.experi_subTop7_frame = Frame(self.experi_rightFrame,background="white")
self.experi_subTop7_frame.pack(
side=TOP,
ipadx=frame_ipadx,
ipady=frame_ipady,
pady=frame_pady,
padx=frame_padx,
)
# Create variables for each manual check (16 placeholders for now)
self.testPassList = [StringVar() for i in range(0,19)]
self.testPassState = ("Pass","Fail")
#################################
### ###
### Info for Card ###
### ###
#################################
# Make a label for the uniqueID entry
self.experi_uniqueID_lbl = Label(self.experi_subTop2_frame, text="Unique ID: ")
self.experi_uniqueID_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_uniqueID_lbl.pack(side=LEFT)
# Make an entry box for the UniqueID
# Make a entrybox for testing comments
self.experi_uniqueID_entry = Entry(
self.experi_subTop2_frame,
textvariable=self.uniqueIDEntry,
state="readonly"
)
self.experi_uniqueID_entry.pack(side=RIGHT)
# Make a label for the temperature entry
self.experi_temperature_lbl = Label(self.experi_subTop2_0_frame, text="Temperature: ")
self.experi_temperature_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_temperature_lbl.pack(side=LEFT)
# Make an entry box for the temperature
# Make a entrybox for testing comments
self.experi_temperature_entry = Entry(
self.experi_subTop2_0_frame,
textvariable=self.tempEntry,
state="readonly"
)
self.experi_temperature_entry.pack(side=RIGHT)
# Make a label for the main firmware ver entry
self.experi_firmwareVer_lbl = Label(self.experi_subTop2_1_frame, text="Bridge Ver (Major): ")
self.experi_firmwareVer_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_firmwareVer_lbl.pack(side=LEFT)
# Make an entry box for the main firmware ver
# Make a entrybox for testing comments
self.experi_firmwareVer_entry = Entry(
self.experi_subTop2_1_frame,
textvariable=self.firmwareVerEntry,
state="readonly"
)
self.experi_firmwareVer_entry.pack(side=RIGHT)
# Make a label for the minor firmware ver entry
self.experi_firmwareVerMin_lbl = Label(self.experi_subTop2_2_frame, text="Bridge Ver (Minor): ")
self.experi_firmwareVerMin_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_firmwareVerMin_lbl.pack(side=LEFT)
# Make an entry box for the minor firmware
# Make a entrybox for testing comments
self.experi_firmwareVerMin_entry = Entry(
self.experi_subTop2_2_frame,
textvariable=self.firmwareVerMinEntry,
state="readonly"
)
self.experi_firmwareVerMin_entry.pack(side=RIGHT)
# Make a label for the other firmware entry
self.experi_firmwareVerOther_lbl = Label(self.experi_subTop2_3_frame, text="Bridge Ver (Other): ")
self.experi_firmwareVerOther_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_firmwareVerOther_lbl.pack(side=LEFT)
# Make an entry box for the other firmware
# Make a entrybox for testing comments
self.experi_firmwareVerOther_entry = Entry(
self.experi_subTop2_3_frame,
textvariable=self.firmwareVerOtherEntry,
state="readonly"
)
self.experi_firmwareVerOther_entry.pack(side=RIGHT)
# Make a label for the major igloo firmware entry
self.experi_iglooMajVer_lbl = Label(self.experi_subTop2_4_frame, text="Igloo Ver (Major): ")
self.experi_iglooMajVer_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_iglooMajVer_lbl.pack(side=LEFT)
# Make an entry box for the major firmware
self.experi_iglooMajVer_entry = Entry(
self.experi_subTop2_4_frame,
textvariable=self.iglooMajVerEntry,
state="readonly"
)
self.experi_iglooMajVer_entry.pack(side=RIGHT)
# Make a label for the minor igloo firmware entry
self.experi_iglooMinVer_lbl = Label(self.experi_subTop2_4_5_frame, text="Igloo Ver (Minor): ")
self.experi_iglooMinVer_lbl.configure(
background="white",
padx=button_padx,
pady=button_pady,
)
self.experi_iglooMinVer_lbl.pack(side=LEFT)
# Make an entry box for the minor firmware
self.experi_iglooMinVer_entry = Entry(
self.experi_subTop2_4_5_frame,
textvariable=self.iglooMinVerEntry,
state="readonly"
)
self.experi_iglooMinVer_entry.pack(side=RIGHT)
# Make a label for the igloo toggle check
self.iglooToggle_label = Label(self.experi_subTop_2_4_6_frame, text="Igloo Toggle Test: ")
self.iglooToggle_label.configure(bg="white",padx=button_padx,pady=button_pady)
self.iglooToggle_label.pack(side=LEFT)
# Make an entry box for the minor firmware
self.iglooToggle_entry = Entry(
self.experi_subTop_2_4_6_frame,
textvariable=self.iglooToggleEntry,
state="readonly"
)
self.iglooToggle_entry.pack(side=RIGHT)
# Make a button to read the unique ID & firmware LEFT SIDE
self.experi_uniqueID_left_get = Button(self.experi_subTop2_5_frame, text ="Get Unique ID & Firmware Ver. from Left", command=self.getUniqueIDPress_left)
self.experi_uniqueID_left_get.configure(bg="CadetBlue1")
self.experi_uniqueID_left_get.pack(side=TOP)
# Make a button to read the unique ID & firmware RIGHT SIDE
self.experi_uniqueID_right_get = Button(self.experi_subTop2_5_frame, text ="Get Unique ID & Firmware Ver. from Right", command=self.getUniqueIDPress_right)
self.experi_uniqueID_right_get.configure(bg="lemon chiffon")
self.experi_uniqueID_right_get.pack(side=TOP)
# Make a button to submit the unique ID & firmware
self.experi_uniqueID_give = Button(self.experi_subTop2_5_frame, text ="Upload Unique ID & Firmware Ver.", command=self.infoSubmitButtonPress)
self.experi_uniqueID_give.configure(bg="salmon2")
self.experi_uniqueID_give.pack(side=TOP)
# Make a line of hypens
self.experi_hyphenLine = Label(self.experi_subTop2_6_frame, text="----------------------------------")
self.experi_hyphenLine.configure(bg="white",padx=button_padx,pady=button_pady)
self.experi_hyphenLine.pack()
# Make a label for the GPIO selection
self.gpioSelect_label = Label(self.experi_subTop2_7_frame, text="Select GPIO Option: ")
self.gpioSelect_label.configure(bg="white",padx=button_padx,pady=button_pady)
self.gpioSelect_label.pack(side=LEFT)
# Make a option menu for GPIO selection
self.gpioSelect_box = OptionMenu(self.experi_subTop2_7_frame, self.gpioChoiceVar,
"J2 and J21","J3 and J20","J4 and J19","J5 and J18",
"J7 and J26","J8 and J25","J9 and J24","J10 and J23")
self.gpioSelect_box.pack(side=LEFT)
self.gpioChoiceVar.set("J2 and J21")
# Make a button to submit GPIO option
self.gpioSelect_bttn = Button(self.experi_subTop2_8_frame, command=self.gpioBttnPress,
text="Submit GPIO Choice")
self.gpioSelect_bttn.configure(bg="CadetBlue1")
self.gpioSelect_bttn.pack()
################################
### ###
### Visual Tests ###
### ###
################################
self.testDescDict = {"Res_1" : "Bkpln to GND", "Res_2" : "1.2V to GND", "Res_3" : "1.5V to GND",
"Res_4" : "2.5V to GND", "Res_5" : "3.3V to GND", "Res_6" : "5.0V to GND",
"Res_7" : "1.2V to 1.5V", "Res_8" : "1.2V to 2.5V", "Res_9" : "1.2V to 3.3V",
"Res_10" : "1.2V to 5.0V", "Res_11" : "1.5V to 2.5V", "Res_12" : "1.5V to 5.0V",
"Res_13" : "2.5V to 3.3V", "Res_14" : "2.5V to 5.0V", "Res_15" : "3.3V to 5.0V",
"SuplCur" : "Supply Current", "Vis" : "Visual Inspec.", "Program" : "Programming OK", "Res_16" : "1.5V to 3.3V"}
# self.testPassList = [StringVar() for i in range(0,19)]
# self.testLabelList = ["Res_1","Res_2","Res_3","Res_4",
# "Res_5","Res_6","Res_7","Res_8",
# "Res_9","Res_10","Res_11", "Res_12",
# "Res_13", "Res_14", "Res_15", "SuplCur", "Vis", "Program",
# "Res_16"]
self.testPassInfo = []
for i in range(0,4):
self.testPassInfo.append(OptionMenu(self.experi_subTop3_frame,self.testPassList[i],"Fail","Pass","N/A",command=self.infoValChange))
self.testPassInfo[i].configure(width=15,bg="#CCDDFF")
self.testPassList[i].set("N/A")
self.testPassInfo[i].pack(side=LEFT)
self.testPassLabel=Label(self.experi_subTop3_fText, text=self.testDescDict[self.testLabelList[i]]+"\n",bg="white")
self.testPassLabel.configure(width=20)
self.testPassLabel.pack(side=LEFT)
for i in range(4,9):
self.testPassInfo.append(OptionMenu(self.experi_subTop4_frame,self.testPassList[i],"Fail","Pass","N/A",command=self.infoValChange))
self.testPassInfo[i].configure(width=11, bg="#CCDDFF")
self.testPassList[i].set("N/A")
self.testPassInfo[i].pack(side=LEFT)
self.testPassLabel=Label(self.experi_subTop4_fText, text=self.testDescDict[self.testLabelList[i]]+"\n", bg="white")
self.testPassLabel.configure(width=15)
self.testPassLabel.pack(side=LEFT)
for i in range(9,14):
self.testPassInfo.append(OptionMenu(self.experi_subTop5_frame,self.testPassList[i],"Fail","Pass","N/A",command=self.infoValChange))
self.testPassInfo[i].configure(width=11,bg="#CCDDFF")
self.testPassList[i].set("N/A")
self.testPassInfo[i].pack(side=LEFT)
self.testPassLabel=Label(self.experi_subTop5_fText, text=self.testDescDict[self.testLabelList[i]]+"\n", bg="white")
self.testPassLabel.configure(width=15)
self.testPassLabel.pack(side=LEFT)
for i in range(14,19):
self.testPassInfo.append(OptionMenu(self.experi_subTop6_frame,self.testPassList[i],"Fail","Pass","N/A",command=self.infoValChange))
self.testPassInfo[i].configure(width=11,bg="#CCDDFF")
self.testPassList[i].set("N/A")
self.testPassInfo[i].pack(side=LEFT)
self.testPassLabel=Label(self.experi_subTop6_fText, text=self.testDescDict[self.testLabelList[i]]+"\n", bg="white")
self.testPassLabel.configure(width=15)
self.testPassLabel.pack(side=LEFT)
# Make a checkbox to overwrite/not overwrite pre-existing data
self.overwriteBox = Checkbutton(self.experi_subTop7_frame, text="Overwrite existing QIE Card data (if applicable)?", variable=self.overwriteVar)
self.overwriteBox.configure(bg="lemon chiffon")
self.overwriteBox.pack(side=TOP,
padx = button_padx,
pady = button_pady,
ipady = button_pady*2,
ipadx = button_padx*2)
# Make a button to submit tests and information
self.passAllTestsBttn = Button(self.experi_subTop7_frame, text="Pass All Tests", command=self.throwPassAllBox)
self.passAllTestsBttn.configure(bg="#FFE699", width=40)
self.passAllTestsBttn.pack(side=TOP)
# Make a button to submit tests and information
self.initSubmitBttn = Button(self.experi_subTop7_frame, text="Submit Inspections & Tests", command=self.initSubmitBttnPress)
self.initSubmitBttn.configure(bg="#FFCC66", width=40)
self.initSubmitBttn.pack(side=TOP)
# Make a button to clear all results
self.clearDataBttn = Button(self.experi_subTop7_frame, text="Clear Inspections, Tests, & Info", command=self.clearDataBttnPress)
self.clearDataBttn.configure(bg="orange", width=40)
self.clearDataBttn.pack(side=TOP)
# Check Checsum!!
from checksumClass import Checksum
from uniqueIDClass import ID
import TestLib as t
from client import webBus
bus6 = webBus("pi6", 0)
def check(bus, rmList, slotList):
for rm in rmList:
t.openRM(bus, rm)
for slot in slotList[4 - rm]:
print "\nUnique ID"
uniqueID = ID(bus, slot)
print uniqueID.raw
print uniqueID.cooked
check = Checksum(uniqueID.raw, 0)
print "result = ", check.result
if check.result == 2:
print "i2c error"
if check.result == 1:
print "checksum error"
if check.result == 0:
print "checksum ok"
# idA = ID(bus6)
# idB = ID(bus6)
# t.openRM(bus6,2)
from client import webBus
b = webBus('pi5', 0) #can add 'pi5,0' so won't print send/receive messages
##############################
# Helpful Tool Functions
##############################
# give function a !!REVERSED!! r/w indexed from sendBatch() and will determine
# if LAST value in the string is a non-zero error code
def isError(ret):
if (ret[-1] != 0): # '0' is non-error value
return True # error
else:
return False # no error
# takes decimal byte, returns list filled with exactly 8 bits
def getBitsFromByte(decimal):
return list('%08d' % int(bin(decimal)[2:]))
# give a list with decimal bytes, returns list of all bits
def getBitsFromBytes(decimalBytes):
ret = []
if not isinstance(decimalBytes, bool):
for i in decimalBytes:
ret = ret + getBitsFromByte(i)
return ret
# new fanout pi6
from client import webBus
b = webBus("pi6",0)
bus5 = webBus("pi5",0)
bus6 = webBus("pi6",0)
# Slots 1,2,3,4
def bridgeAddress(slot):
address = [0x19, 0x1a,0x1b, 0x1c]
return address[slot-1]
# RMs 1,2,3,4
def ngccmGroup(rm):
i2cGroups = [0x01,0x10,0x20,0x02]
return i2cGroups[rm-1]
def openRM(rm,bus):
if rm in [3,4]:
# Open channel to ngCCM for RM 3,4: J1 - J10
print '### Open RM ', rm
bus.write(0x72,[2])
elif rm in [1,2]:
# Open channel to ngCCM for RM 1,2: J17 - J26
print '### Open RM ', rm
bus.write(0x72,[1])
else:
print 'Invalid RM = ', rm
print 'Please choose RM = {1,2,3,4}'
return 'closed channel'
# Open channel to i2c group
import sys
sys.path.append('../')
from client import webBus
import Hardware as h
import iglooClass as i
# from TestSoftware.uHTR import uHTR
qcard_slots = [2, 5]
b = webBus("pi5", 0)
# uhtr = uHTR(6,qcard_slots,b)
#-------------------------------------
for slot in qcard_slots:
print '__________________________________________________'
print '____________________Slot %d_______________________' % slot
print '__________________________________________________'
myDC = h.getDChains(slot, b)
# i.turnOnCI()
d
myDC.read()
print myDC[0]
print '__________________________________________________'
print '__________________________________________________'
print '__________________________________________________'
# for num in xrange(12):
# for chip in xrange(12):
# myDC[chip].ChargeInjectDAC(8640)
from client import webBus
b = webBus("pi4")
b.read(0x72, 1)
print b.sendBatch()
# Daisy chain objects must use .write() after changes are made in order to affect chips
##### Imports #####
import sys
sys.path.append("../")
from client import webBus
import Hardware as h
import iglooClass_adry as i
from uniqueID import ID
# from uHTR import uHTR
##### Global Vars #####
pi = "pi5" # 'pi5' or 'pi6' etc
b = webBus(pi,0) # webBus sets active pi; 0 = server verbosity off
all_slots = [2,3,4,5,7,8,9,10,18,19,20,21,23,24,25,26]
slots = all_slots # list of active J slots
##### Functions ######
def chargeInjectOn(slots, bus):
for slot in slots:
h.SetQInjMode(1, slot, b)
i.displayCI(bus,slot)
def chargeInjectOff(slots, bus):
for slot in slots:
h.SetQInjMode(0, slot, b)
i.displayCI(bus,slot)
#TestLib.py
#Testing Library for QIE Tests.
from client import webBus
import QIELib as q
import TestLib as t
b = webBus("pi5",0)
#MUX slave addresses (slave i2c addresses)
MUXs = {
"fanout" : 0x72,
"ngccm" : {
"u10" : 0x74,
"u18" : 0x70
},
"bridge" : [0x19, 0x1a, 0x1b, 0x1c]
}
#Register addresses
REGs = {
"qie0" : 0x30,
"qie1" : 0x31,
"iscSelect" : 0x11,
"vttx" : 0x7E,
"igloo" : 0x09,
"ID" : 0x50,
"temp" : 0x40
}
# Simplify your life today with RMi2c and QIEi2c. Boom dog.
RMi2c = {
# RM 0,1
# Run complete QIE Test Sweet
from client import webBus
import uniqueID
import TestLib
b = webBus("pi5")
u = uniqueID
t = TestLib
def run(RMList, num_slots=4):
uniqueIDArray = []
# Iterate through RM 0, 1, 2, 3 (include desired RMs in list)
for rm in RMList:
idList = []
# Iterate through Slot 0, 1, 2, 3 (run for all 4 slots by default)
for slot in xrange(num_slots):
idList.append(u.uniqueID(rm,slot))
# b.clearBus()
uniqueIDArray.append(idList)
return uniqueIDArray
### Outdated, not used now! ###
def printRun(RMList, num_slots=4):
uniqueIDArray = run(RMList, num_slots)
for rm in RMList:
for slot in xrange(num_slots):
print 'RM: ', rm, ' slot: ', slot
print 'UniqueID (dec): ', t.reverseBytes(uniqueIDArray[rm][slot])
print 'UniqueID (hex): ', t.toHex(t.reverseBytes(uniqueIDArray[rm][slot]))
# Use printIDs from TestLib
uniqueIDArray = run([0])