def create_content_groups(self):
"""
Creates two content groups in Studio Group Configurations Settings.
"""
group_configurations_page = GroupConfigurationsPage(
self.browser, self.course_info['org'], self.course_info['number'],
self.course_info['run'])
group_configurations_page.visit()
group_configurations_page.create_first_content_group()
config = group_configurations_page.content_groups[0]
config.name = self.content_group_a
config.save()
group_configurations_page.add_content_group()
config = group_configurations_page.content_groups[1]
config.name = self.content_group_b
config.save()
def create_content_groups(self):
"""
Creates two content groups in Studio Group Configurations Settings.
"""
group_configurations_page = GroupConfigurationsPage(
self.browser,
self.course_info['org'],
self.course_info['number'],
self.course_info['run']
)
group_configurations_page.visit()
group_configurations_page.create_first_content_group()
config = group_configurations_page.content_groups[0]
config.name = self.content_group_a
config.save()
group_configurations_page.add_content_group()
config = group_configurations_page.content_groups[1]
config.name = self.content_group_b
config.save()
class ContentGroupConfigurationTest(StudioCourseTest):
"""
Tests for content groups in the Group Configurations Page.
There are tests for the experiment groups in test_studio_split_test.
"""
def setUp(self):
super(ContentGroupConfigurationTest, self).setUp()
self.group_configurations_page = GroupConfigurationsPage(
self.browser,
self.course_info['org'],
self.course_info['number'],
self.course_info['run']
)
self.outline_page = CourseOutlinePage(
self.browser,
self.course_info['org'],
self.course_info['number'],
self.course_info['run']
)
def populate_course_fixture(self, course_fixture):
"""
Populates test course with chapter, sequential, and 1 problems.
The problem is visible only to Group "alpha".
"""
course_fixture.add_children(
XBlockFixtureDesc('chapter', 'Test Section').add_children(
XBlockFixtureDesc('sequential', 'Test Subsection').add_children(
XBlockFixtureDesc('vertical', 'Test Unit')
)
)
)
def create_and_verify_content_group(self, name, existing_groups):
"""
Creates a new content group and verifies that it was properly created.
"""
self.assertEqual(existing_groups, len(self.group_configurations_page.content_groups))
if existing_groups == 0:
self.group_configurations_page.create_first_content_group()
else:
self.group_configurations_page.add_content_group()
config = self.group_configurations_page.content_groups[existing_groups]
config.name = name
# Save the content group
self.assertEqual(config.get_text('.action-primary'), "Create")
self.assertFalse(config.delete_button_is_present)
config.save()
self.assertIn(name, config.name)
return config
def test_no_content_groups_by_default(self):
"""
Scenario: Ensure that message telling me to create a new content group is
shown when no content groups exist.
Given I have a course without content groups
When I go to the Group Configuration page in Studio
Then I see "You have not created any content groups yet." message
"""
self.group_configurations_page.visit()
self.assertTrue(self.group_configurations_page.no_content_groups_message_is_present)
self.assertIn(
"You have not created any content groups yet.",
self.group_configurations_page.no_content_groups_message_text
)
def test_can_create_and_edit_content_groups(self):
"""
Scenario: Ensure that the content groups can be created and edited correctly.
Given I have a course without content groups
When I click button 'Add your first Content Group'
And I set new the name and click the button 'Create'
Then I see the new content is added and has correct data
And I click 'New Content Group' button
And I set the name and click the button 'Create'
Then I see the second content group is added and has correct data
When I edit the second content group
And I change the name and click the button 'Save'
Then I see the second content group is saved successfully and has the new name
"""
self.group_configurations_page.visit()
self.create_and_verify_content_group("New Content Group", 0)
second_config = self.create_and_verify_content_group("Second Content Group", 1)
# Edit the second content group
second_config.edit()
second_config.name = "Updated Second Content Group"
self.assertEqual(second_config.get_text('.action-primary'), "Save")
second_config.save()
self.assertIn("Updated Second Content Group", second_config.name)
def test_cannot_delete_used_content_group(self):
"""
Scenario: Ensure that the user cannot delete used content group.
Given I have a course with 1 Content Group
And I go to the Group Configuration page
When I try to delete the Content Group with name "New Content Group"
Then I see the delete button is disabled.
"""
self.course_fixture._update_xblock(self.course_fixture._course_location, {
"metadata": {
u"user_partitions": [
create_user_partition_json(
0,
'Configuration alpha,',
'Content Group Partition',
[Group("0", 'alpha')],
scheme="cohort"
)
],
},
})
problem_data = dedent("""
<problem markdown="Simple Problem" max_attempts="" weight="">
<p>Choose Yes.</p>
<choiceresponse>
<checkboxgroup>
<choice correct="true">Yes</choice>
</checkboxgroup>
</choiceresponse>
</problem>
""")
vertical = self.course_fixture.get_nested_xblocks(category="vertical")[0]
self.course_fixture.create_xblock(
vertical.locator,
XBlockFixtureDesc('problem', "VISIBLE TO ALPHA", data=problem_data, metadata={"group_access": {0: [0]}}),
)
self.group_configurations_page.visit()
config = self.group_configurations_page.content_groups[0]
self.assertTrue(config.delete_button_is_disabled)
def test_can_delete_unused_content_group(self):
"""
Scenario: Ensure that the user can delete unused content group.
Given I have a course with 1 Content Group
And I go to the Group Configuration page
When I delete the Content Group with name "New Content Group"
Then I see that there is no Content Group
When I refresh the page
Then I see that the content group has been deleted
"""
self.group_configurations_page.visit()
config = self.create_and_verify_content_group("New Content Group", 0)
self.assertTrue(config.delete_button_is_present)
self.assertEqual(len(self.group_configurations_page.content_groups), 1)
# Delete content group
config.delete()
self.assertEqual(len(self.group_configurations_page.content_groups), 0)
self.group_configurations_page.visit()
self.assertEqual(len(self.group_configurations_page.content_groups), 0)
def test_must_supply_name(self):
"""
Scenario: Ensure that validation of the content group works correctly.
Given I have a course without content groups
And I create new content group without specifying a name click the button 'Create'
Then I see error message "Content Group name is required."
When I set a name and click the button 'Create'
Then I see the content group is saved successfully
"""
self.group_configurations_page.visit()
self.group_configurations_page.create_first_content_group()
config = self.group_configurations_page.content_groups[0]
config.save()
self.assertEqual(config.mode, 'edit')
self.assertEqual("Group name is required", config.validation_message)
config.name = "Content Group Name"
config.save()
self.assertIn("Content Group Name", config.name)
def test_can_cancel_creation_of_content_group(self):
"""
Scenario: Ensure that creation of a content group can be canceled correctly.
Given I have a course without content groups
When I click button 'Add your first Content Group'
And I set new the name and click the button 'Cancel'
Then I see that there is no content groups in the course
"""
self.group_configurations_page.visit()
self.group_configurations_page.create_first_content_group()
config = self.group_configurations_page.content_groups[0]
config.name = "Content Group"
config.cancel()
self.assertEqual(0, len(self.group_configurations_page.content_groups))
def test_content_group_empty_usage(self):
"""
Scenario: When content group is not used, ensure that the link to outline page works correctly.
Given I have a course without content group
And I create new content group
Then I see a link to the outline page
When I click on the outline link
Then I see the outline page
"""
self.group_configurations_page.visit()
config = self.create_and_verify_content_group("New Content Group", 0)
config.toggle()
config.click_outline_anchor()
# Waiting for the page load and verify that we've landed on course outline page
self.outline_page.wait_for_page()
class ContentGroupConfigurationTest(StudioCourseTest):
"""
Tests for content groups in the Group Configurations Page.
There are tests for the experiment groups in test_studio_split_test.
"""
def setUp(self):
super(ContentGroupConfigurationTest, self).setUp()
self.group_configurations_page = GroupConfigurationsPage(
self.browser,
self.course_info['org'],
self.course_info['number'],
self.course_info['run']
)
self.outline_page = CourseOutlinePage(
self.browser,
self.course_info['org'],
self.course_info['number'],
self.course_info['run']
)
def populate_course_fixture(self, course_fixture):
"""
Populates test course with chapter, sequential, and 1 problems.
The problem is visible only to Group "alpha".
"""
course_fixture.add_children(
XBlockFixtureDesc('chapter', 'Test Section').add_children(
XBlockFixtureDesc('sequential', 'Test Subsection').add_children(
XBlockFixtureDesc('vertical', 'Test Unit')
)
)
)
def create_and_verify_content_group(self, name, existing_groups):
"""
Creates a new content group and verifies that it was properly created.
"""
self.assertEqual(existing_groups, len(self.group_configurations_page.content_groups))
if existing_groups == 0:
self.group_configurations_page.create_first_content_group()
else:
self.group_configurations_page.add_content_group()
config = self.group_configurations_page.content_groups[existing_groups]
config.name = name
# Save the content group
self.assertEqual(config.get_text('.action-primary'), "Create")
self.assertFalse(config.delete_button_is_present)
config.save()
self.assertIn(name, config.name)
return config
def test_no_content_groups_by_default(self):
"""
Scenario: Ensure that message telling me to create a new content group is
shown when no content groups exist.
Given I have a course without content groups
When I go to the Group Configuration page in Studio
Then I see "You have not created any content groups yet." message
"""
self.group_configurations_page.visit()
self.assertTrue(self.group_configurations_page.no_content_groups_message_is_present)
self.assertIn(
"You have not created any content groups yet.",
self.group_configurations_page.no_content_groups_message_text
)
def test_can_create_and_edit_content_groups(self):
"""
Scenario: Ensure that the content groups can be created and edited correctly.
Given I have a course without content groups
When I click button 'Add your first Content Group'
And I set new the name and click the button 'Create'
Then I see the new content is added and has correct data
And I click 'New Content Group' button
And I set the name and click the button 'Create'
Then I see the second content group is added and has correct data
When I edit the second content group
And I change the name and click the button 'Save'
Then I see the second content group is saved successfully and has the new name
"""
self.group_configurations_page.visit()
self.create_and_verify_content_group("New Content Group", 0)
second_config = self.create_and_verify_content_group("Second Content Group", 1)
# Edit the second content group
second_config.edit()
second_config.name = "Updated Second Content Group"
self.assertEqual(second_config.get_text('.action-primary'), "Save")
second_config.save()
self.assertIn("Updated Second Content Group", second_config.name)
def test_cannot_delete_used_content_group(self):
"""
Scenario: Ensure that the user cannot delete used content group.
Given I have a course with 1 Content Group
And I go to the Group Configuration page
When I try to delete the Content Group with name "New Content Group"
Then I see the delete button is disabled.
"""
self.course_fixture._update_xblock(self.course_fixture._course_location, {
"metadata": {
u"user_partitions": [
create_user_partition_json(
0,
'Configuration alpha,',
'Content Group Partition',
[Group("0", 'alpha')],
scheme="cohort"
)
],
},
})
problem_data = dedent("""
<problem markdown="Simple Problem" max_attempts="" weight="">
<p>Choose Yes.</p>
<choiceresponse>
<checkboxgroup>
<choice correct="true">Yes</choice>
</checkboxgroup>
</choiceresponse>
</problem>
""")
vertical = self.course_fixture.get_nested_xblocks(category="vertical")[0]
self.course_fixture.create_xblock(
vertical.locator,
XBlockFixtureDesc('problem', "VISIBLE TO ALPHA", data=problem_data, metadata={"group_access": {0: [0]}}),
)
self.group_configurations_page.visit()
config = self.group_configurations_page.content_groups[0]
self.assertTrue(config.delete_button_is_disabled)
def test_can_delete_unused_content_group(self):
"""
Scenario: Ensure that the user can delete unused content group.
Given I have a course with 1 Content Group
And I go to the Group Configuration page
When I delete the Content Group with name "New Content Group"
Then I see that there is no Content Group
When I refresh the page
Then I see that the content group has been deleted
"""
self.group_configurations_page.visit()
config = self.create_and_verify_content_group("New Content Group", 0)
self.assertTrue(config.delete_button_is_present)
self.assertEqual(len(self.group_configurations_page.content_groups), 1)
# Delete content group
config.delete()
self.assertEqual(len(self.group_configurations_page.content_groups), 0)
self.group_configurations_page.visit()
self.assertEqual(len(self.group_configurations_page.content_groups), 0)
def test_must_supply_name(self):
"""
Scenario: Ensure that validation of the content group works correctly.
Given I have a course without content groups
And I create new content group without specifying a name click the button 'Create'
Then I see error message "Content Group name is required."
When I set a name and click the button 'Create'
Then I see the content group is saved successfully
"""
self.group_configurations_page.visit()
self.group_configurations_page.create_first_content_group()
config = self.group_configurations_page.content_groups[0]
config.save()
self.assertEqual(config.mode, 'edit')
self.assertEqual("Group name is required", config.validation_message)
config.name = "Content Group Name"
config.save()
self.assertIn("Content Group Name", config.name)
def test_can_cancel_creation_of_content_group(self):
"""
Scenario: Ensure that creation of a content group can be canceled correctly.
Given I have a course without content groups
When I click button 'Add your first Content Group'
And I set new the name and click the button 'Cancel'
Then I see that there is no content groups in the course
"""
self.group_configurations_page.visit()
self.group_configurations_page.create_first_content_group()
config = self.group_configurations_page.content_groups[0]
config.name = "Content Group"
config.cancel()
self.assertEqual(0, len(self.group_configurations_page.content_groups))
def test_content_group_empty_usage(self):
"""
Scenario: When content group is not used, ensure that the link to outline page works correctly.
Given I have a course without content group
And I create new content group
Then I see a link to the outline page
When I click on the outline link
Then I see the outline page
"""
self.group_configurations_page.visit()
config = self.create_and_verify_content_group("New Content Group", 0)
config.toggle()
config.click_outline_anchor()
# Waiting for the page load and verify that we've landed on course outline page
self.outline_page.wait_for_page()
