예제 #1
0
파일: cardbox.py 프로젝트: court-jus/bgm
    def run(self,mainframe,values=None):
        BLACK=0
        from config import card_folder, a4_size, PRINT_FORMAT
        from os.path import join,isfile,splitext
        from math import sqrt, radians
        from ImageOps import grayscale
        dst=values['Destination file']
        DEPTH=values['Depth(cm)']
        LENGTH=values['Length(cm) - optional']
        WIDTH=values['Width(cm) - optional']
        if not dst:
            dlg = wx.FileDialog(mainframe, "Choose a destination file for Box Front", mainframe.deckdir, "box.png", "*.*", wx.SAVE| wx.OVERWRITE_PROMPT)
            try:
                if dlg.ShowModal() == wx.ID_OK:
                    dst = dlg.GetPath()
                else:
                    return
            finally:
                dlg.Destroy()
        name,ext=splitext(dst)
        dstfront='.'.join([name,'front'])+ext
        dstback='.'.join([name,'back'])+ext
        front=values['front']
        if not isfile(front):
            front=None
        back=values['back']
        if not isfile(back):
            back=None
        sidelr=values['side (left/right)']
        if not isfile(sidelr):
            sidelr=None
        sidetb=values['side (top/bottom)']
        if not isfile(sidetb):
            sidetb=None
        #Determine tuckbox size
        width,length=mainframe.fitting_size
        from config import left, right, bottom, top, a4_size, DEBUG, PRINT_FORMAT, card_folder, sheet_left, sheet_top, BLACK_FILLING
        width+=left+right+5  + 10 #10 added to make some place for the card around it in the tuckbox
        length+=top+bottom+5 
        length=float(length+10)
        width=float(width+10)
        deep=10+float((mainframe.deckgrid.GetDeckSize()))* 2.5
        import config
        if DEPTH:
            deep=config.cm2p(DEPTH)
        if LENGTH:
            length=config.cm2p(LENGTH)
        if WIDTH:
            width=config.cm2p(WIDTH)
        #Adapt length & width to have back insert in to front
        lengthFront=length+10
        widthFront=width+10
        #Create Tuckboxes lines
        import Image, ImageDraw
        #w,l=a4_size
        w=int(3*deep+2*width+1)
        l=int(3*deep+length +1)
        if sorted((w,l))>sorted(a4_size):
            print "won't fit in a4 page"
        _W,_L=a4_size
        sheet=Image.new('RGB', (_W,_L),(255,255,255))
        sheetFront=Image.new('RGB',(_W,_L),(255,255,255))
        drawFront=ImageDraw.Draw(sheetFront)
        draw=ImageDraw.Draw(sheet)
        #Draw necessary lines
        rw=7*deep/8
        rl=deep/4
        for d,w,l in zip((draw,drawFront),(width,widthFront),(length,lengthFront)):
            d.rectangle((0,deep-rl,rw,deep),outline=BLACK)
            d.rectangle((0,l+deep,rw,l+deep+rl),outline=BLACK)
            d.rectangle((deep+w+deep-rw,deep-rl,deep+w+deep,deep),outline=BLACK)
            d.rectangle((deep+w+deep-rw,l+deep,deep+w+deep,l+deep+rl),outline=BLACK)
            d.line((rw,deep-rl, deep,deep),fill=BLACK)
            d.line((rw,deep-rl, deep,deep),fill=BLACK)
        #Now copy & resize images in the tuckboxes
        length=int(length)
        width=int(width)
        deep=int(deep)
        
        if front:
            front_image=Image.open(front)
            front_image=front_image.resize((widthFront,lengthFront))
            sheetFront.paste(front_image,(deep,deep))
        if back:
            back_image=Image.open(back)
            back_image=back_image.resize((width,length))
            sheet.paste(back_image,(deep,deep))
        if sidelr:
            side=Image.open(sidelr)
            side=grayscale(side.resize((length,deep)))
            lside=side.rotate(90,expand=True)
            rside=side.rotate(270,expand=True)
            sheet.paste(rside,(0,deep))
            sheet.paste(lside,(deep+width,deep))
            
            side=Image.open(sidelr)
            side=side.resize((lengthFront,deep))
            lside=side.rotate(90,expand=True)
            rside=side.rotate(270,expand=True)
            sheetFront.paste(rside,(0,deep))
            sheetFront.paste(lside,(deep+widthFront,deep))
            
        if sidetb:
            side=Image.open(sidetb)
            side=grayscale(side.resize((width,deep)))
            bside=side.rotate(180,expand=True)
            sheet.paste(side,(deep,0))
            sheet.paste(bside,(deep,length+deep))

            side=Image.open(sidetb)
            side=side.resize((widthFront,deep))
            bside=side.rotate(180,expand=True)
            sheetFront.paste(bside,(deep,0))
            sheetFront.paste(side,(deep,lengthFront+deep))
            
            
        #Save & display
        sheet.save(dstback)
        sheetFront.save(dstfront)
        import os
        os.startfile(dstfront)
        return
예제 #2
0
파일: printer.py 프로젝트: opqopq/bgm_wx
def pdfcreate_image(deckname, dst, fitting_size, front,back, templates):
    output=canvas.Canvas(os.path.join(dst,deckname+".pdf"),psize,cropMarks=False)
    output.setTitle(deckname)
    output.setStrokeColor(black)
    output.setFont('Times-Roman',10)
    output.setPageCallBack(cb)
    import config
    if fitting_size is None:
        fitting_size=(config.px,config.py)
    else:
        fitting_size=[p2cm(i) for i in fitting_size]
    a4_size_x,a4_size_y=(config.a4x,config.a4y)
    x,y=fitting_size
    left=p2cm(config.left)
    right=p2cm(config.right)
    top=p2cm(config.top)
    bottom=p2cm(config.bottom)
    sheet_left=p2cm(config.sheet_left)
    sheet_top=p2cm(config.sheet_top)
    x_gap=left+right+x+p2cm(5)
    y_gap=top+bottom+y+p2cm(5)
    NUM_ROW=int((a4_size_x-top)/x_gap)
    NUM_COL=int((a4_size_y-left)/y_gap)
    PICT_BY_SHEET=NUM_COL*NUM_ROW
    deckname=deckname.lower().split('.')[0]
    if DEBUG:
        print 'Preparing %d picts by sheet (%d by %d)'%(PICT_BY_SHEET, NUM_ROW, NUM_COL),
        _t=""
        if dual: _t=" BACK mode"
        print _t
    maxlen=max(len(front),len(back))
    for i in range(int(ceil((float(maxlen)/PICT_BY_SHEET)))):
        for dual,imgs in zip((False,True),(front,back)):
            if not imgs:
                continue
            sheet_imgs=imgs[PICT_BY_SHEET*i:PICT_BY_SHEET*(i+1)]
            if not sheet_imgs:
                continue
            sheet_imgs.reverse()
            #Write the fiiting size info for deck + date
            from datetime import date
            text="Printed on the %s. fitting size: %s"%(date.today().strftime('%d/%m/%y'),fitting_size)
            output.drawString(sheet_left,a4_size_y-sheet_left,text)        
            for col in range(NUM_COL):
                for row in range(NUM_ROW):
                    try:
                        s,rotated,templateName,values=sheet_imgs.pop()
                        #print s,rotated,templateName,values
                        T=templates.get(templateName,None)
                        if not T:
                            #print templateName,T, templates.keys()
                            T= template_empty
                        #else:
                        #print 'using template',T.name
                        card=T.draw(os.path.join(config.card_folder,s.encode('cp1252')),fitting_size,values)
                    except IndexError:#done ! 
                        break
                    if rotated:
                        card=card.rotate(90)
    
                    #No more resizing: this is being handled by draw image bounding box                
                    card=card.resize([config.cm2p(_i) for _i in fitting_size])
    
                    #Start point is reverted from right border if dual
                    if not dual:
                        startx=row*x_gap + sheet_left
                    else:
                        startx=a4_size_x - ((row+1)*x_gap + sheet_left)
                    starty=col*y_gap + sheet_top
                    #Line vertical:
                    output.line(startx*cm,0,startx*cm,a4_size_y*cm)
                    output.line(cm*(startx+left+right+x),0,cm*(startx+left+right+x),a4_size_y*cm)
                    #Line horizontal
                    output.line(0,starty*cm,a4_size_x*cm,starty*cm)
                    output.line(0,(starty+top+bottom+y)*cm,a4_size_x*cm,(starty+top+bottom+y)*cm)
                    #~ #black rectangle
                    if config.BLACK_FILLING:
                        output.rect(startx*cm,starty*cm, (left+right+x)*cm, (top+bottom+y)*cm,fill=True)
                    #PAste image
                    c=StringIO()
                    card.save(c, format="PNG")
                    c.seek(0) #Rewind it
                    ir = ImageReader(c)
                    #print 'Pasting Image at cm:',startx+left,starty+top, x,y,fitting_size
                    output.drawImage(ir,(startx+left)*cm,(starty+top)*cm,x*cm,y*cm)
            output.showPage()
            #In dual mode, save as back
    output.save()
예제 #3
0
파일: cardbox.py 프로젝트: court-jus/bgm
 def run(self,mainframe,values=None):
     BLACK=0
     from config import card_folder, a4_size, PRINT_FORMAT
     from os.path import join,isfile
     from math import sqrt, radians
     dst=values['Destination file']
     DEPTH=values['Depth(cm)']
     LENGTH=values['Length(cm) - optional']
     WIDTH=values['Width(cm) - optional']
     if not dst:
         dlg = wx.FileDialog(mainframe, "Choose a destination file", mainframe.deckdir, "tuckbox.png", "*.*", wx.SAVE| wx.OVERWRITE_PROMPT)
         try:
             if dlg.ShowModal() == wx.ID_OK:
                 dst = dlg.GetPath()
             else:
                 return
         finally:
             dlg.Destroy()
     front=values['front']
     if not isfile(front):
         front=None
     back=values['back']
     if not isfile(back):
         back=None
     sidelr=values['side (left/right)']
     if not isfile(sidelr):
         sidelr=None
     sidetb=values['side (top/bottom)']
     if not isfile(sidetb):
         sidetb=None
     #Determine tuckbox size
     width,length=mainframe.fitting_size
     from config import left, right, bottom, top, a4_size, DEBUG, PRINT_FORMAT, card_folder, sheet_left, sheet_top, BLACK_FILLING
     width+=left+right+5  + 10 #10 added to make some place for the card around it in the tuckbox
     length+=top+bottom+5 
     length=float(length+10)
     width=float(width+10)
     deep=10+float((mainframe.deckgrid.GetDeckSize()))* 2.5
     import config
     if DEPTH:
         deep=config.cm2p(DEPTH)
     if LENGTH:
         length=config.cm2p(LENGTH)
     if WIDTH:
         width=config.cm2p(WIDTH)
     #Create Tuckboxes lines
     import Image, ImageDraw
     #w,l=a4_size
     w=int(3*deep+2*width+1)
     l=int(3*deep+length +1)
     if sorted((w,l))>sorted(a4_size):
         print "won't fit in a4 page"
     _W,_L=reversed(a4_size)
     sheet=Image.new('RGB', (_W,_L),(255,255,255))
     draw=ImageDraw.Draw(sheet)
     #Draw necessary lines
     def ysym(y):
         return int(3*deep + length - y)
     iso= lambda x:x
     step=deep/4
     colors=[BLACK]*6
     for stopx,color in zip([deep,deep+width, 2*deep+width,2*(deep+width),2.9*deep+2*width],colors):
         draw.rectangle((0,deep+2*step,stopx,deep+2*step+length),outline=color)
     for func in (iso,ysym):
         draw.line((deep/2,func(deep), deep,func(deep)),fill=colors[0])
         draw.line((deep+width,func(deep), 3*deep/2+width,func(deep)),fill=colors[1])
         draw.line((deep,func(2*step), deep,func(deep+2*step)),fill=colors[2])
         draw.line((deep,func(2*step), deep+width,func(2*step)),fill=colors[3])
         draw.line((deep+width/4,func(0), deep+3*width/4,func(0)),fill=colors[4])
         draw.line((deep+width,func(2*step), deep+width,func(deep+2*step)),fill=colors[5])
         draw.arc((0,int(deep+2*step),int(deep/2),int(deep)),180,270,fill=BLACK)
     #Now for the folding bottom rectangle, only at the bottom
     draw.rectangle((2*deep+width,length+step+deep,2*(deep+width),length+step+2*deep),outline=BLACK)
     #Now the arcs
     draw.arc((int(width+deep),int(deep),int(2*deep+width),int(2*deep)),270,360,fill="#000000")
     draw.arc((int(width+deep),int(length+deep),int(2*deep+width),int(length+2*deep)),0,90,fill="#000000")
     draw.arc((0,int(deep),int(deep),int(2*deep)),180,270,fill="#000000")
     draw.arc((0,int(length+deep),int(deep),int(length+2*deep)),90,180,fill="#000000")
     ##
     draw.arc((int(deep),0,int(deep+width/2),int(deep)),180,270,fill="#000000")
     draw.arc((int(deep),int(2*deep+length),int(deep+width/2),int(3*deep+length)),90,180,fill="#000000")
     draw.arc((int(width/2+deep),0,int(deep+width),int(deep)),270,360,fill="#000000")
     draw.arc((int(width/2+deep),int(2*deep+length),int(deep+width),int(3*deep+length)),0,90,fill="#0000ff")
     
     #Now copy & resize images in the tuckboxes
     length=int(length)
     width=int(width)
     deep=int(deep)
     step=int(step)
     if front:
         front_image=Image.open(front)
         front_image=front_image.resize((width,length))
         sheet.paste(front_image,(width+2*deep,deep+2*step))
     if back:
         back_image=Image.open(back)
         back_image=back_image.resize((width,length))
         sheet.paste(back_image,(deep,deep+2*step))
     if sidelr:
         side=Image.open(sidelr)
         side=side.resize((length,deep))
         lside=side.rotate(90,expand=True)
         rside=side.rotate(270,expand=True)
         sheet.paste(rside,(0,deep+step*2))
         sheet.paste(lside,(deep+width,deep+2*step))
     if sidetb:
         side=Image.open(sidetb)
         side=side.resize((width,deep))
         bside=side.rotate(180,expand=True)
         sheet.paste(side,(deep,2*step))
         sheet.paste(bside,(deep,length+deep+2*step))
     #Save & display
     sheet.save(dst)
     import os
     os.startfile(dst)