def __init__(self,mqqthost,nodeid,service,base_topic='emonhub'):
self.d = DbusMonitor(datalist.vrmtree, self._value_changed_on_dbus)
"""
self.ttl = 300 # seconds to keep sending the updates. If no keepAlive received in this
# time - stop sending
self.lastKeepAliveRcd = int(time.time()) - self.ttl # initialised to when this code launches
"""
self.ttm = 0 # seconds to gather data before sending, 0 - send immediate, NN - gather
# for NN seconds
self._last_publish = int(time.time() - 60) # Just an initialisation value, so the first
# ttm timeout is _now_
self._gathered_data_timer = None
self._gathered_data = {}
self._mqtt = mqtt.Client(client_id=get_vrm_portal_id(), clean_session=True, userdata=None)
self._mqtt.loop_start() # creates new thread and runs Mqtt.loop_forever() in it.
self._mqtt.on_connect = self._on_connect
self._mqtt.on_message = self._on_message
self._mqtt.connect_async(mqqthost, port=1883, keepalive=60, bind_address="")
self._service_name = service
self._nodeid = nodeid #node ide expected by emonhub . need to modigy emonhub.conf accordingly
self._topic = base_topic
message = '{basetopic}/tx/{nodeid}/values'
self._publishPath = message.format(basetopic=self._topic,nodeid=self._nodeid)
def __init__(self):
self._dbusservice = None
self._batteryservice = None
self._settings = SettingsDevice(
bus=dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus(),
supportedSettings={
'batteryinstance': ['/Settings/Generator/BatteryInstance', 0, 0, 1000],
'running': ['/Settings/Generator/Running', 0, 0, 1],
'autostopsoc': ['/Settings/Generator/AutoStopSOC', 90, 0, 100],
'autostartsoc': ['/Settings/Generator/AutoStartSOC', 10, 0, 100],
'autostartcurrent': ['/Settings/Generator/AutoStartCurrent', 0, 0, 500]
},
eventCallback=self._handle_changed_setting)
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
self._dbusmonitor = DbusMonitor({
'com.victronenergy.battery': {
'/Dc/0/I': dummy,
'/Soc': dummy},
'com.victronenergy.settings': {
'/Settings/Relay/Function': dummy} # This is not our setting so do it here. not in supportedSettings
}, self._dbus_value_changed, self._device_added, self._device_removed)
self._evaluate_if_we_are_needed()
def __init__(self, retries=300):
self._bus = dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus()
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.HISTORY_DAYS = 30
# One second per retry
self.RETRIES_ON_ERROR = retries
self._current_retries = 0
self.TANKSERVICE_DEFAULT = 'default'
self.TANKSERVICE_NOTANK = 'notanksensor'
self._dbusservice = None
self._tankservice = self.TANKSERVICE_NOTANK
self._valid_tank_level = True
self._relay_state_import = None
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
# TODO: possible improvement: don't use the DbusMonitor it all, since we are only monitoring
# a set of static values which will always be available. DbusMonitor watches for services
# that come and go, and takes care of automatic signal subscribtions etc. etc: all not necessary
# in this use case where we have fixed services names (com.victronenergy.settings, and c
# com.victronenergy.system).
self._dbusmonitor = DbusMonitor({
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy
},
'com.victronenergy.tank': { # This is not our setting so do it here. not in supportedSettings
'/Level': dummy,
'/FluidType': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy
}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Connect to localsettings
self._settings = SettingsDevice(
bus=self._bus,
supportedSettings={
'tankservice': ['/Settings/Pump0/TankService', self.TANKSERVICE_NOTANK, 0, 1],
'autostart': ['/Settings/Pump0/AutoStartEnabled', 1, 0, 1],
'startvalue': ['/Settings/Pump0/StartValue', 50, 0, 100],
'stopvalue': ['/Settings/Pump0/StopValue', 80, 0, 100],
'mode': ['/Settings/Pump0/Mode', 0, 0, 100] # Auto = 0, On = 1, Off = 2
},
eventCallback=self._handle_changed_setting)
# Whenever services come or go, we need to check if it was a service we use. Note that this
# is a bit double: DbusMonitor does the same thing. But since we don't use DbusMonitor to
# monitor for com.victronenergy.battery, .vebus, .charger or any other possible source of
# battery data, it is necessary to monitor for changes in the available dbus services.
self._bus.add_signal_receiver(self._dbus_name_owner_changed, signal_name='NameOwnerChanged')
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._changed = True
class SystemCalc:
def __init__(self, dbusmonitor_gen=None, dbusservice_gen=None, settings_device_gen=None):
self.STATE_IDLE = 0
self.STATE_CHARGING = 1
self.STATE_DISCHARGING = 2
self.BATSERVICE_DEFAULT = 'default'
self.BATSERVICE_NOBATTERY = 'nobattery'
# Why this dummy? Because DbusMonitor expects these values to be there, even though we don't
# need them. So just add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
dbus_tree = {
'com.victronenergy.solarcharger': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy},
'com.victronenergy.pvinverter': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy,
'/Position': dummy,
'/ProductId': dummy},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy,
'/TimeToGo': dummy,
'/ConsumedAmphours': dummy},
'com.victronenergy.vebus' : {
'/Ac/ActiveIn/ActiveInput': dummy,
'/Ac/ActiveIn/L1/P': dummy,
'/Ac/ActiveIn/L2/P': dummy,
'/Ac/ActiveIn/L3/P': dummy,
'/Ac/Out/L1/P': dummy,
'/Ac/Out/L2/P': dummy,
'/Ac/Out/L3/P': dummy,
'/Hub4/AcPowerSetpoint': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy},
'com.victronenergy.charger': {
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy},
'com.victronenergy.grid' : {
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId' : dummy,
'/DeviceType' : dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy},
'com.victronenergy.genset' : {
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId' : dummy,
'/DeviceType' : dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy},
'com.victronenergy.settings' : {
'/Settings/SystemSetup/AcInput1' : dummy,
'/Settings/SystemSetup/AcInput2' : dummy}
}
if dbusmonitor_gen is None:
self._dbusmonitor = DbusMonitor(dbus_tree, self._dbus_value_changed, self._device_added, self._device_removed)
else:
self._dbusmonitor = dbusmonitor_gen(dbus_tree)
# Connect to localsettings
supported_settings = {
'batteryservice': ['/Settings/SystemSetup/BatteryService', self.BATSERVICE_DEFAULT, 0, 0],
'hasdcsystem': ['/Settings/SystemSetup/HasDcSystem', 0, 0, 1],
'writevebussoc': ['/Settings/SystemSetup/WriteVebusSoc', 0, 0, 1]}
if settings_device_gen is None:
self._settings = SettingsDevice(
bus=dbus.SessionBus() if 'DBUS_SESSION_BUS_ADDRESS' in os.environ else dbus.SystemBus(),
supportedSettings=supported_settings,
eventCallback=self._handlechangedsetting)
else:
self._settings = settings_device_gen(supported_settings, self._handlechangedsetting)
# put ourselves on the dbus
if dbusservice_gen is None:
self._dbusservice = VeDbusService('com.victronenergy.system')
else:
self._dbusservice = dbusservice_gen('com.victronenergy.system')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareVersion,
connection='data from other dbus processes',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# At this moment, VRM portal ID is the MAC address of the CCGX. Anyhow, it should be string uniquely
# identifying the CCGX.
self._dbusservice.add_path('/Serial', value=get_vrm_portal_id())
self._dbusservice.add_path(
'/AvailableBatteryServices', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/AvailableBatteryMeasurements', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/AutoSelectedBatteryService', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/AutoSelectedBatteryMeasurement', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/ActiveBatteryService', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/PvInvertersProductIds', value=None)
self._summeditems = {
'/Ac/Grid/L1/Power': {'gettext': '%.0F W'},
'/Ac/Grid/L2/Power': {'gettext': '%.0F W'},
'/Ac/Grid/L3/Power': {'gettext': '%.0F W'},
'/Ac/Grid/Total/Power': {'gettext': '%.0F W'},
'/Ac/Grid/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/Grid/ProductId': {'gettext': '%s'},
'/Ac/Grid/DeviceType': {'gettext': '%s'},
'/Ac/Genset/L1/Power': {'gettext': '%.0F W'},
'/Ac/Genset/L2/Power': {'gettext': '%.0F W'},
'/Ac/Genset/L3/Power': {'gettext': '%.0F W'},
'/Ac/Genset/Total/Power': {'gettext': '%.0F W'},
'/Ac/Genset/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/Genset/ProductId': {'gettext': '%s'},
'/Ac/Genset/DeviceType': {'gettext': '%s'},
'/Ac/Consumption/L1/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/L2/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/L3/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/Total/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/L1/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/L2/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/L3/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/Total/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/L1/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/L2/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/L3/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/Total/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/L1/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/L2/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/L3/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/NumberOfPhases': {'gettext': '%d'},
'/Ac/PvOnGenset/Total/Power': {'gettext': '%.0F W'},
'/Dc/Pv/Power': {'gettext': '%.0F W'},
'/Dc/Pv/Current': {'gettext': '%.1F A'},
'/Dc/Battery/Voltage': {'gettext': '%.2F V'},
'/Dc/Battery/Current': {'gettext': '%.1F A'},
'/Dc/Battery/Power': {'gettext': '%.0F W'},
'/Dc/Battery/Soc': {'gettext': '%.0F %%'},
'/Dc/Battery/State': {'gettext': '%s'},
'/Dc/Battery/TimeToGo': {'gettext': '%.0F s'},
'/Dc/Battery/ConsumedAmphours': {'gettext': '%.1F Ah'},
'/Dc/Charger/Power': {'gettext': '%.0F %%'},
'/Dc/Vebus/Current': {'gettext': '%.1F A'},
'/Dc/Vebus/Power': {'gettext': '%.0F W'},
'/Dc/System/Power': {'gettext': '%.0F W'},
'/Hub': {'gettext': '%s'},
'/Ac/ActiveIn/Source': {'gettext': '%s'},
'/VebusService': {'gettext': '%s'}
}
for path in self._summeditems.keys():
self._dbusservice.add_path(path, value=None, gettextcallback=self._gettext)
self._batteryservice = None
self._determinebatteryservice()
if self._batteryservice is None:
logger.info("Battery service initialized to None (setting == %s)" %
self._settings['batteryservice'])
self._changed = True
for service, instance in self._dbusmonitor.get_service_list().items():
self._device_added(service, instance, do_service_change=False)
self._handleservicechange()
self._updatevalues()
self._writeVebusSocCounter = 9
gobject.timeout_add(1000, exit_on_error, self._handletimertick)
def _handlechangedsetting(self, setting, oldvalue, newvalue):
self._determinebatteryservice()
self._changed = True
def _determinebatteryservice(self):
auto_battery_service = self._autoselect_battery_service()
auto_battery_measurement = None
if auto_battery_service is not None:
services = self._dbusmonitor.get_service_list()
if auto_battery_service in services:
auto_battery_measurement = \
self._get_instance_service_name(auto_battery_service, services[auto_battery_service])
auto_battery_measurement = auto_battery_measurement.replace('.', '_').replace('/', '_') + '/Dc/0'
self._dbusservice['/AutoSelectedBatteryMeasurement'] = auto_battery_measurement
if self._settings['batteryservice'] == self.BATSERVICE_DEFAULT:
newbatteryservice = auto_battery_service
self._dbusservice['/AutoSelectedBatteryService'] = (
'No battery monitor found' if newbatteryservice is None else
self._get_readable_service_name(newbatteryservice))
elif self._settings['batteryservice'] == self.BATSERVICE_NOBATTERY:
self._dbusservice['/AutoSelectedBatteryService'] = None
newbatteryservice = None
else:
self._dbusservice['/AutoSelectedBatteryService'] = None
s = self._settings['batteryservice'].split('/')
if len(s) != 2:
logger.error("The battery setting (%s) is invalid!" % self._settings['batteryservice'])
serviceclass = s[0]
instance = int(s[1]) if len(s) == 2 else None
services = self._dbusmonitor.get_service_list(classfilter=serviceclass)
if instance not in services.values():
# Once chosen battery monitor does not exist. Don't auto change the setting (it might come
# back). And also don't autoselect another.
newbatteryservice = None
else:
# According to https://www.python.org/dev/peps/pep-3106/, dict.keys() and dict.values()
# always have the same order.
newbatteryservice = services.keys()[services.values().index(instance)]
if newbatteryservice != self._batteryservice:
services = self._dbusmonitor.get_service_list()
instance = services.get(newbatteryservice, None)
if instance is None:
battery_service = None
else:
battery_service = self._get_instance_service_name(newbatteryservice, instance)
self._dbusservice['/ActiveBatteryService'] = battery_service
logger.info("Battery service, setting == %s, changed from %s to %s (%s)" %
(self._settings['batteryservice'], self._batteryservice, newbatteryservice, instance))
self._batteryservice = newbatteryservice
def _autoselect_battery_service(self):
# Default setting business logic:
# first try to use a battery service (BMV or Lynx Shunt VE.Can). If there is more than one battery
# service, use the first one (sort alphabetical). If no battery service is available, check if there
# are not Solar chargers and no normal chargers. If they are not there, assume this is a hub-2,
# hub-3 or hub-4 system and use VE.Bus SOC.
battery_service = self._get_first_service('com.victronenergy.battery')
if battery_service is not None:
return battery_service
if len(self._dbusmonitor.get_service_list('com.victronenergy.solarcharger')) > 0:
return None
if len(self._dbusmonitor.get_service_list('com.victronenergy.charger')) > 0:
return None
vebus_service = self._get_first_service('com.victronenergy.vebus')
return vebus_service # will be None when no vebus service found
# Called on a one second timer
def _handletimertick(self):
if self._changed:
self._updatevalues()
self._changed = False
self._writeVebusSocCounter += 1
if self._writeVebusSocCounter >= 10:
self._writeVebusSoc()
self._writeVebusSocCounter = 0
return True # keep timer running
def _writeVebusSoc(self):
# ==== COPY BATTERY SOC TO VEBUS ====
if self._settings['writevebussoc'] and self._dbusservice['/VebusService'] and self._dbusservice['/Dc/Battery/Soc'] and \
self._batteryservice.split('.')[2] != 'vebus':
logger.debug("writing this soc to vebus: %d", self._dbusservice['/Dc/Battery/Soc'])
self._dbusmonitor.get_item(self._dbusservice['/VebusService'], '/Soc').set_value(self._dbusservice['/Dc/Battery/Soc'])
def _updatepvinverterspidlist(self):
# Create list of connected pv inverters id's
pvinverters = self._dbusmonitor.get_service_list('com.victronenergy.pvinverter')
productids = []
for pvinverter in pvinverters:
pid = self._dbusmonitor.get_value(pvinverter, '/ProductId')
if pid not in productids:
productids.append(pid)
self._dbusservice['/PvInvertersProductIds'] = productids if productids else None
def _updatevalues(self):
# ==== PREPARATIONS ====
# Determine values used in logic below
vebusses = self._dbusmonitor.get_service_list('com.victronenergy.vebus')
vebuspower = 0
for vebus in vebusses:
v = self._dbusmonitor.get_value(vebus, '/Dc/0/Voltage')
i = self._dbusmonitor.get_value(vebus, '/Dc/0/Current')
if v is not None and i is not None:
vebuspower += v * i
# ==== PVINVERTERS ====
pvinverters = self._dbusmonitor.get_service_list('com.victronenergy.pvinverter')
newvalues = {}
pos = {0: '/Ac/PvOnGrid', 1: '/Ac/PvOnOutput', 2: '/Ac/PvOnGenset'}
total = {0: None, 1: None, 2: None}
for pvinverter in pvinverters:
# Position will be None if PV inverter service has just been removed (after retrieving the
# service list).
position = pos.get(self._dbusmonitor.get_value(pvinverter, '/Position'))
if position is not None:
for phase in range(1, 4):
power = self._dbusmonitor.get_value(pvinverter, '/Ac/L%s/Power' % phase)
if power is not None:
path = '%s/L%s/Power' % (position, phase)
newvalues[path] = _safeadd(newvalues.get(path), power)
for path in pos.values():
self._compute_phase_totals(path, newvalues)
# ==== SOLARCHARGERS ====
solarchargers = self._dbusmonitor.get_service_list('com.victronenergy.solarcharger')
solarcharger_batteryvoltage = None
for solarcharger in solarchargers:
v = self._dbusmonitor.get_value(solarcharger, '/Dc/0/Voltage')
if v is None:
continue
i = self._dbusmonitor.get_value(solarcharger, '/Dc/0/Current')
if i is None:
continue
if '/Dc/Pv/Power' not in newvalues:
newvalues['/Dc/Pv/Power'] = v * i
newvalues['/Dc/Pv/Current'] = i
solarcharger_batteryvoltage = v
else:
newvalues['/Dc/Pv/Power'] += v * i
newvalues['/Dc/Pv/Current'] += i
# ==== CHARGERS ====
chargers = self._dbusmonitor.get_service_list('com.victronenergy.charger')
charger_batteryvoltage = None
for charger in chargers:
# Assume the battery connected to output 0 is the main battery
v = self._dbusmonitor.get_value(charger, '/Dc/0/Voltage')
if v is None:
continue
charger_batteryvoltage = v
i = self._dbusmonitor.get_value(charger, '/Dc/0/Current')
if i is None:
continue
if '/Dc/Charger/Power' not in newvalues:
newvalues['/Dc/Charger/Power'] = v * i
else:
newvalues['/Dc/Charger/Power'] += v * i
# ==== BATTERY ====
if self._batteryservice is not None:
batteryservicetype = self._batteryservice.split('.')[2] # either 'battery' or 'vebus'
newvalues['/Dc/Battery/Soc'] = self._dbusmonitor.get_value(self._batteryservice,'/Soc')
newvalues['/Dc/Battery/TimeToGo'] = self._dbusmonitor.get_value(self._batteryservice,'/TimeToGo')
newvalues['/Dc/Battery/ConsumedAmphours'] = self._dbusmonitor.get_value(self._batteryservice,'/ConsumedAmphours')
if batteryservicetype == 'battery':
newvalues['/Dc/Battery/Voltage'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/Voltage')
newvalues['/Dc/Battery/Current'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/Current')
newvalues['/Dc/Battery/Power'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/Power')
elif batteryservicetype == 'vebus':
newvalues['/Dc/Battery/Voltage'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/Voltage')
newvalues['/Dc/Battery/Current'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/Current')
if newvalues['/Dc/Battery/Voltage'] is not None and newvalues['/Dc/Battery/Current'] is not None:
newvalues['/Dc/Battery/Power'] = (
newvalues['/Dc/Battery/Voltage'] * newvalues['/Dc/Battery/Current'])
p = newvalues.get('/Dc/Battery/Power', None)
if p is not None:
if p > 30:
newvalues['/Dc/Battery/State'] = self.STATE_CHARGING
elif p < -30:
newvalues['/Dc/Battery/State'] = self.STATE_DISCHARGING
else:
newvalues['/Dc/Battery/State'] = self.STATE_IDLE
else:
batteryservicetype = None
if solarcharger_batteryvoltage is not None:
newvalues['/Dc/Battery/Voltage'] = solarcharger_batteryvoltage
elif charger_batteryvoltage is not None:
newvalues['/Dc/Battery/Voltage'] = charger_batteryvoltage
else:
# CCGX-connected system consists of only a Multi, but it is not user-selected, nor
# auto-selected as the battery-monitor, probably because there are other loads or chargers.
# In that case, at least use its reported battery voltage.
vebusses = self._dbusmonitor.get_service_list('com.victronenergy.vebus')
for vebus in vebusses:
v = self._dbusmonitor.get_value(vebus, '/Dc/0/Voltage')
if v is not None:
newvalues['/Dc/Battery/Voltage'] = v
if self._settings['hasdcsystem'] == 0 and '/Dc/Battery/Voltage' in newvalues:
# No unmonitored DC loads or chargers, and also no battery monitor: derive battery watts
# and amps from vebus, solarchargers and chargers.
assert '/Dc/Battery/Power' not in newvalues
assert '/Dc/Battery/Current' not in newvalues
p = newvalues.get('/Dc/Pv/Power', 0) + newvalues.get('/Dc/Charger/Power', 0) + vebuspower
voltage = newvalues['/Dc/Battery/Voltage']
newvalues['/Dc/Battery/Current'] = p / voltage if voltage > 0 else None
newvalues['/Dc/Battery/Power'] = p
# ==== SYSTEM ====
if self._settings['hasdcsystem'] == 1 and batteryservicetype == 'battery':
# Calculate power being generated/consumed by not measured devices in the network.
# /Dc/System: positive: consuming power
# VE.Bus: Positive: current flowing from the Multi to the dc system or battery
# Solarcharger & other chargers: positive: charging
# battery: Positive: charging battery.
# battery = solarcharger + charger + ve.bus - system
battery_power = newvalues.get('/Dc/Battery/Power')
if battery_power is not None:
dc_pv_power = newvalues.get('/Dc/Pv/Power', 0)
charger_power = newvalues.get('/Dc/Charger/Power', 0)
newvalues['/Dc/System/Power'] = dc_pv_power + charger_power + vebuspower - battery_power
# ==== Vebus ====
# Assume there's only 1 multi service present on the D-Bus
multi_path = self._get_first_service('com.victronenergy.vebus')
if multi_path is not None:
dc_current = self._dbusmonitor.get_value(multi_path, '/Dc/0/Current')
newvalues['/Dc/Vebus/Current'] = dc_current
dc_power = self._dbusmonitor.get_value(multi_path, '/Dc/0/Power')
# Just in case /Dc/0/Power is not available
if dc_power == None and dc_current is not None:
dc_voltage = self._dbusmonitor.get_value(multi_path, '/Dc/0/Voltage')
if dc_voltage is not None:
dc_power = dc_voltage * dc_current
# Note that there is also vebuspower, which is the total DC power summed over all multis.
# However, this value cannot be combined with /Dc/Multi/Current, because it does not make sense
# to add the Dc currents of all multis if they do not share the same DC voltage.
newvalues['/Dc/Vebus/Power'] = dc_power
newvalues['/VebusService'] = multi_path
# ===== AC IN SOURCE =====
ac_in_source = None
active_input = self._dbusmonitor.get_value(multi_path, '/Ac/ActiveIn/ActiveInput')
if active_input is not None:
settings_path = '/Settings/SystemSetup/AcInput%s' % (active_input + 1)
ac_in_source = self._dbusmonitor.get_value('com.victronenergy.settings', settings_path)
newvalues['/Ac/ActiveIn/Source'] = ac_in_source
# ===== HUB MODE =====
# The code below should be executed after PV inverter data has been updated, because we need the
# PV inverter total power to update the consumption.
hub = None
if self._dbusmonitor.get_value(multi_path, '/Hub4/AcPowerSetpoint') is not None:
hub = 4
elif newvalues.get('/Dc/Pv/Power', None) is not None:
hub = 1
elif newvalues.get('/Ac/PvOnOutput/Total/Power', None) is not None:
hub = 2
elif newvalues.get('/Ac/PvOnGrid/Total/Power', None) is not None or \
newvalues.get('/Ac/PvOnGenset/Total/Power', None) is not None:
hub = 3
newvalues['/Hub'] = hub
# ===== GRID METERS & CONSUMPTION ====
consumption = { "L1" : None, "L2" : None, "L3" : None }
for device_type in ['Grid', 'Genset']:
servicename = 'com.victronenergy.%s' % device_type.lower()
em_service = self._get_first_service(servicename)
uses_active_input = False
if multi_path is not None:
# If a grid meter is present we use values from it. If not, we look at the multi. If it has
# AcIn1 or AcIn2 connected to the grid, we use those values.
# com.victronenergy.grid.??? indicates presence of an energy meter used as grid meter.
# com.victronenergy.vebus.???/Ac/ActiveIn/ActiveInput: decides which whether we look at AcIn1
# or AcIn2 as possible grid connection.
if ac_in_source is not None:
uses_active_input = ac_in_source > 0 and (ac_in_source == 2) == (device_type == 'Genset')
for phase in consumption:
p = None
pvpower = newvalues.get('/Ac/PvOn%s/%s/Power' % (device_type, phase))
if em_service is not None:
p = self._dbusmonitor.get_value(em_service, '/Ac/%s/Power' % phase)
# Compute consumption between energy meter and multi (meter power - multi AC in) and
# add an optional PV inverter on input to the mix.
c = consumption[phase]
if uses_active_input:
ac_in = self._dbusmonitor.get_value(multi_path, '/Ac/ActiveIn/%s/P' % phase)
if ac_in is not None:
c = _safeadd(c, -ac_in)
# If there's any power coming from a PV inverter in the inactive AC in (which is unlikely),
# it will still be used, because there may also be a load in the same ACIn consuming
# power, or the power could be fed back to the net.
c = _safeadd(c, p, pvpower)
consumption[phase] = None if c is None else max(0, c)
else:
if uses_active_input:
p = self._dbusmonitor.get_value(multi_path, '/Ac/ActiveIn/%s/P' % phase)
# No relevant energy meter present. Assume there is no load between the grid and the multi.
# There may be a PV inverter present though (Hub-3 setup).
if pvpower != None:
p = _safeadd(p, -pvpower)
newvalues['/Ac/%s/%s/Power' % (device_type, phase)] = p
self._compute_phase_totals('/Ac/%s' % device_type, newvalues)
if em_service is not None:
newvalues['/Ac/%s/ProductId' % device_type] = self._dbusmonitor.get_value(em_service, '/ProductId')
newvalues['/Ac/%s/DeviceType' % device_type] = self._dbusmonitor.get_value(em_service, '/DeviceType')
for phase in consumption:
c = consumption[phase]
pvpower = newvalues.get('/Ac/PvOnOutput/%s/Power' % phase)
c = _safeadd(c, pvpower)
if multi_path is not None:
ac_out = self._dbusmonitor.get_value(multi_path, '/Ac/Out/%s/P' % phase)
c = _safeadd(c, ac_out)
newvalues['/Ac/Consumption/%s/Power' % phase] = None if c is None else max(0, c)
self._compute_phase_totals('/Ac/Consumption', newvalues)
# TODO EV Add Multi DeviceType & ProductID. Unfortunately, the com.victronenergy.vebus.??? tree does
# not contain a /ProductId entry.
# ==== UPDATE DBUS ITEMS ====
for path in self._summeditems.keys():
# Why the None? Because we want to invalidate things we don't have anymore.
self._dbusservice[path] = newvalues.get(path, None)
def _handleservicechange(self):
# Update the available battery monitor services, used to populate the dropdown in the settings.
# Below code makes a dictionary. The key is [dbuserviceclass]/[deviceinstance]. For example
# "battery/245". The value is the name to show to the user in the dropdown. The full dbus-
# servicename, ie 'com.victronenergy.vebus.ttyO1' is not used, since the last part of that is not
# fixed. dbus-serviceclass name and the device instance are already fixed, so best to use those.
services = self._dbusmonitor.get_service_list('com.victronenergy.vebus')
services.update(self._dbusmonitor.get_service_list('com.victronenergy.battery'))
ul = {self.BATSERVICE_DEFAULT: 'Automatic', self.BATSERVICE_NOBATTERY: 'No battery monitor'}
for servicename, instance in services.items():
key = self._get_instance_service_name(servicename, instance)
ul[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableBatteryServices'] = json.dumps(ul)
ul = {self.BATSERVICE_DEFAULT: 'Automatic', self.BATSERVICE_NOBATTERY: 'No battery monitor'}
# For later: for device supporting multiple Dc measurement we should add entries for /Dc/1 etc as
# well.
for servicename, instance in services.items():
key = self._get_instance_service_name(servicename, instance).replace('.', '_').replace('/', '_') + '/Dc/0'
ul[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableBatteryMeasurements'] = dbus.Dictionary(ul, signature='sv')
self._determinebatteryservice()
self._updatepvinverterspidlist()
self._changed = True
def _get_readable_service_name(self, servicename):
return (self._dbusmonitor.get_value(servicename, '/ProductName') + ' on ' +
self._dbusmonitor.get_value(servicename, '/Mgmt/Connection'))
def _get_instance_service_name(self, service, instance):
return '%s/%s' % ('.'.join(service.split('.')[0:3]), instance)
def _get_service_mapping_path(self, service, instance):
sn = self._get_instance_service_name(service, instance).replace('.', '_').replace('/', '_')
return '/ServiceMapping/%s' % sn
def _dbus_value_changed(self, dbusServiceName, dbusPath, dict, changes, deviceInstance):
self._changed = True
# Workaround because com.victronenergy.vebus is available even when there is no vebus product
# connected.
if dbusPath in ['/ProductName', '/Mgmt/Connection']:
self._handleservicechange()
def _device_added(self, service, instance, do_service_change=True):
path = self._get_service_mapping_path(service, instance)
if path in self._dbusservice:
self._dbusservice[path] = service
else:
self._dbusservice.add_path(path, service)
if do_service_change:
self._handleservicechange()
def _device_removed(self, service, instance):
path = self._get_service_mapping_path(service, instance)
if path in self._dbusservice:
del self._dbusservice[path]
self._handleservicechange()
def _gettext(self, path, value):
if path == '/Dc/Battery/State':
state = {self.STATE_IDLE: 'Idle', self.STATE_CHARGING: 'Charging',
self.STATE_DISCHARGING: 'Discharging'}
return state[value]
item = self._summeditems.get(path)
if item is not None:
return item['gettext'] % value
return value
def _compute_phase_totals(self, path, newvalues):
total_power = None
number_of_phases = None
for phase in range(1, 4):
p = newvalues.get('%s/L%s/Power' % (path, phase))
total_power = _safeadd(total_power, p)
if p is not None:
number_of_phases = phase
newvalues[path + '/Total/Power'] = total_power
newvalues[path + '/NumberOfPhases'] = number_of_phases
def _get_first_service(self, classfilter=None):
services = self._dbusmonitor.get_service_list(classfilter=classfilter)
if len(services) == 0:
return None
return sorted(services.keys())[0]
def __init__(self):
self._bus = dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus()
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.HISTORY_DAYS = 30
# One second per retry
self.RETRIES_ON_ERROR = 300
self._testrun_soc_retries = 0
self._last_counters_check = 0
self._dbusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self._timer_runnning = 0
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = True
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
self._vebusservice = None
self._vebusservice_available = False
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'acload': {
'name': 'acload',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'inverterhightemp': {
'name': 'inverterhightemp',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'monitoring': 'vebus'
},
'inverteroverload': {
'name': 'inverteroverload',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'soc': {
'name': 'soc',
'reached': False,
'boolean': False,
'timed': False,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
# TODO: possible improvement: don't use the DbusMonitor it all, since we are only monitoring
# a set of static values which will always be available. DbusMonitor watches for services
# that come and go, and takes care of automatic signal subscribtions etc. etc: all not necessary
# in this use case where we have fixed services names (com.victronenergy.settings, and c
# com.victronenergy.system).
self._dbusmonitor = DbusMonitor({
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy,
},
'com.victronenergy.system': { # This is not our setting so do it here. not in supportedSettings
'/Ac/Consumption/Total/Power': dummy,
'/Ac/PvOnOutput/Total/Power': dummy,
'/Ac/PvOnGrid/Total/Power': dummy,
'/Ac/PvOnGenset/Total/Power': dummy,
'/Dc/Pv/Power': dummy,
'/AutoSelectedBatteryMeasurement': dummy,
}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=self._bus,
supportedSettings={
'autostart': ['/Settings/Generator0/AutoStartEnabled', 1, 0, 1],
'accumulateddaily': ['/Settings/Generator0/AccumulatedDaily', '', 0, 0],
'accumulatedtotal': ['/Settings/Generator0/AccumulatedTotal', 0, 0, 0],
'batterymeasurement': ['/Settings/Generator0/BatteryService', "default", 0, 0],
'minimumruntime': ['/Settings/Generator0/MinimumRuntime', 0, 0, 86400], # minutes
# On permanent loss of communication: 0 = Stop, 1 = Start, 2 = keep running
'onlosscommunication': ['/Settings/Generator0/OnLossCommunication', 0, 0, 2],
# Quiet hours
'quiethoursenabled': ['/Settings/Generator0/QuietHours/Enabled', 0, 0, 1],
'quiethoursstarttime': ['/Settings/Generator0/QuietHours/StartTime', 75600, 0, 86400],
'quiethoursendtime': ['/Settings/Generator0/QuietHours/EndTime', 21600, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator0/Soc/Enabled', 0, 0, 1],
'socstart': ['/Settings/Generator0/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator0/Soc/StopValue', 90, 0, 100],
'qh_socstart': ['/Settings/Generator0/Soc/QuietHoursStartValue', 90, 0, 100],
'qh_socstop': ['/Settings/Generator0/Soc/QuietHoursStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled': ['/Settings/Generator0/BatteryVoltage/Enabled', 0, 0, 1],
'batteryvoltagestart': ['/Settings/Generator0/BatteryVoltage/StartValue', 11.5, 0, 150],
'batteryvoltagestop': ['/Settings/Generator0/BatteryVoltage/StopValue', 12.4, 0, 150],
'batteryvoltagestarttimer': ['/Settings/Generator0/BatteryVoltage/StartTimer', 20, 0, 10000],
'batteryvoltagestoptimer': ['/Settings/Generator0/BatteryVoltage/StopTimer', 20, 0, 10000],
'qh_batteryvoltagestart': ['/Settings/Generator0/BatteryVoltage/QuietHoursStartValue', 11.9, 0, 100],
'qh_batteryvoltagestop': ['/Settings/Generator0/BatteryVoltage/QuietHoursStopValue', 12.4, 0, 100],
# Current
'batterycurrentenabled': ['/Settings/Generator0/BatteryCurrent/Enabled', 0, 0, 1],
'batterycurrentstart': ['/Settings/Generator0/BatteryCurrent/StartValue', 10.5, 0.5, 1000],
'batterycurrentstop': ['/Settings/Generator0/BatteryCurrent/StopValue', 5.5, 0, 1000],
'batterycurrentstarttimer': ['/Settings/Generator0/BatteryCurrent/StartTimer', 20, 0, 10000],
'batterycurrentstoptimer': ['/Settings/Generator0/BatteryCurrent/StopTimer', 20, 0, 10000],
'qh_batterycurrentstart': ['/Settings/Generator0/BatteryCurrent/QuietHoursStartValue', 20.5, 0, 1000],
'qh_batterycurrentstop': ['/Settings/Generator0/BatteryCurrent/QuietHoursStopValue', 15.5, 0, 1000],
# AC load
'acloadenabled': ['/Settings/Generator0/AcLoad/Enabled', 0, 0, 1],
'acloadstart': ['/Settings/Generator0/AcLoad/StartValue', 1600, 5, 100000],
'acloadstop': ['/Settings/Generator0/AcLoad/StopValue', 800, 0, 100000],
'acloadstarttimer': ['/Settings/Generator0/AcLoad/StartTimer', 20, 0, 10000],
'acloadstoptimer': ['/Settings/Generator0/AcLoad/StopTimer', 20, 0, 10000],
'qh_acloadstart': ['/Settings/Generator0/AcLoad/QuietHoursStartValue', 1900, 0, 100000],
'qh_acloadstop': ['/Settings/Generator0/AcLoad/QuietHoursStopValue', 1200, 0, 100000],
# VE.Bus high temperature
'inverterhightempenabled': ['/Settings/Generator0/InverterHighTemp/Enabled', 0, 0, 1],
'inverterhightempstarttimer': ['/Settings/Generator0/InverterHighTemp/StartTimer', 20, 0, 10000],
'inverterhightempstoptimer': ['/Settings/Generator0/InverterHighTemp/StopTimer', 20, 0, 10000],
# VE.Bus overload
'inverteroverloadenabled': ['/Settings/Generator0/InverterOverload/Enabled', 0, 0, 1],
'inverteroverloadstarttimer': ['/Settings/Generator0/InverterOverload/StartTimer', 20, 0, 10000],
'inverteroverloadstoptimer': ['/Settings/Generator0/InverterOverload/StopTimer', 20, 0, 10000],
# TestRun
'testrunenabled': ['/Settings/Generator0/TestRun/Enabled', 0, 0, 1],
'testrunstartdate': ['/Settings/Generator0/TestRun/StartDate', time.time(), 0, 10000000000.1],
'testrunstarttimer': ['/Settings/Generator0/TestRun/StartTime', 54000, 0, 86400],
'testruninterval': ['/Settings/Generator0/TestRun/Interval', 28, 1, 365],
'testrunruntime': ['/Settings/Generator0/TestRun/Duration', 7200, 1, 86400],
'testrunskipruntime': ['/Settings/Generator0/TestRun/SkipRuntime', 0, 0, 100000],
'testruntillbatteryfull': ['/Settings/Generator0/TestRun/RunTillBatteryFull', 0, 0, 1]
},
eventCallback=self._handle_changed_setting)
# Whenever services come or go, we need to check if it was a service we use. Note that this
# is a bit double: DbusMonitor does the same thing. But since we don't use DbusMonitor to
# monitor for com.victronenergy.battery, .vebus, .charger or any other possible source of
# battery data, it is necessary to monitor for changes in the available dbus services.
self._bus.add_signal_receiver(self._dbus_name_owner_changed, signal_name='NameOwnerChanged')
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._update_relay()
self._changed = True
class DbusGenerator:
def __init__(self):
self._bus = dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus()
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.HISTORY_DAYS = 30
# One second per retry
self.RETRIES_ON_ERROR = 300
self._testrun_soc_retries = 0
self._last_counters_check = 0
self._dbusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self._timer_runnning = 0
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = True
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
self._vebusservice = None
self._vebusservice_available = False
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'acload': {
'name': 'acload',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'inverterhightemp': {
'name': 'inverterhightemp',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'monitoring': 'vebus'
},
'inverteroverload': {
'name': 'inverteroverload',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'soc': {
'name': 'soc',
'reached': False,
'boolean': False,
'timed': False,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
# TODO: possible improvement: don't use the DbusMonitor it all, since we are only monitoring
# a set of static values which will always be available. DbusMonitor watches for services
# that come and go, and takes care of automatic signal subscribtions etc. etc: all not necessary
# in this use case where we have fixed services names (com.victronenergy.settings, and c
# com.victronenergy.system).
self._dbusmonitor = DbusMonitor({
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy,
},
'com.victronenergy.system': { # This is not our setting so do it here. not in supportedSettings
'/Ac/Consumption/Total/Power': dummy,
'/Ac/PvOnOutput/Total/Power': dummy,
'/Ac/PvOnGrid/Total/Power': dummy,
'/Ac/PvOnGenset/Total/Power': dummy,
'/Dc/Pv/Power': dummy,
'/AutoSelectedBatteryMeasurement': dummy,
}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=self._bus,
supportedSettings={
'autostart': ['/Settings/Generator0/AutoStartEnabled', 1, 0, 1],
'accumulateddaily': ['/Settings/Generator0/AccumulatedDaily', '', 0, 0],
'accumulatedtotal': ['/Settings/Generator0/AccumulatedTotal', 0, 0, 0],
'batterymeasurement': ['/Settings/Generator0/BatteryService', "default", 0, 0],
'minimumruntime': ['/Settings/Generator0/MinimumRuntime', 0, 0, 86400], # minutes
# On permanent loss of communication: 0 = Stop, 1 = Start, 2 = keep running
'onlosscommunication': ['/Settings/Generator0/OnLossCommunication', 0, 0, 2],
# Quiet hours
'quiethoursenabled': ['/Settings/Generator0/QuietHours/Enabled', 0, 0, 1],
'quiethoursstarttime': ['/Settings/Generator0/QuietHours/StartTime', 75600, 0, 86400],
'quiethoursendtime': ['/Settings/Generator0/QuietHours/EndTime', 21600, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator0/Soc/Enabled', 0, 0, 1],
'socstart': ['/Settings/Generator0/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator0/Soc/StopValue', 90, 0, 100],
'qh_socstart': ['/Settings/Generator0/Soc/QuietHoursStartValue', 90, 0, 100],
'qh_socstop': ['/Settings/Generator0/Soc/QuietHoursStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled': ['/Settings/Generator0/BatteryVoltage/Enabled', 0, 0, 1],
'batteryvoltagestart': ['/Settings/Generator0/BatteryVoltage/StartValue', 11.5, 0, 150],
'batteryvoltagestop': ['/Settings/Generator0/BatteryVoltage/StopValue', 12.4, 0, 150],
'batteryvoltagestarttimer': ['/Settings/Generator0/BatteryVoltage/StartTimer', 20, 0, 10000],
'batteryvoltagestoptimer': ['/Settings/Generator0/BatteryVoltage/StopTimer', 20, 0, 10000],
'qh_batteryvoltagestart': ['/Settings/Generator0/BatteryVoltage/QuietHoursStartValue', 11.9, 0, 100],
'qh_batteryvoltagestop': ['/Settings/Generator0/BatteryVoltage/QuietHoursStopValue', 12.4, 0, 100],
# Current
'batterycurrentenabled': ['/Settings/Generator0/BatteryCurrent/Enabled', 0, 0, 1],
'batterycurrentstart': ['/Settings/Generator0/BatteryCurrent/StartValue', 10.5, 0.5, 1000],
'batterycurrentstop': ['/Settings/Generator0/BatteryCurrent/StopValue', 5.5, 0, 1000],
'batterycurrentstarttimer': ['/Settings/Generator0/BatteryCurrent/StartTimer', 20, 0, 10000],
'batterycurrentstoptimer': ['/Settings/Generator0/BatteryCurrent/StopTimer', 20, 0, 10000],
'qh_batterycurrentstart': ['/Settings/Generator0/BatteryCurrent/QuietHoursStartValue', 20.5, 0, 1000],
'qh_batterycurrentstop': ['/Settings/Generator0/BatteryCurrent/QuietHoursStopValue', 15.5, 0, 1000],
# AC load
'acloadenabled': ['/Settings/Generator0/AcLoad/Enabled', 0, 0, 1],
'acloadstart': ['/Settings/Generator0/AcLoad/StartValue', 1600, 5, 100000],
'acloadstop': ['/Settings/Generator0/AcLoad/StopValue', 800, 0, 100000],
'acloadstarttimer': ['/Settings/Generator0/AcLoad/StartTimer', 20, 0, 10000],
'acloadstoptimer': ['/Settings/Generator0/AcLoad/StopTimer', 20, 0, 10000],
'qh_acloadstart': ['/Settings/Generator0/AcLoad/QuietHoursStartValue', 1900, 0, 100000],
'qh_acloadstop': ['/Settings/Generator0/AcLoad/QuietHoursStopValue', 1200, 0, 100000],
# VE.Bus high temperature
'inverterhightempenabled': ['/Settings/Generator0/InverterHighTemp/Enabled', 0, 0, 1],
'inverterhightempstarttimer': ['/Settings/Generator0/InverterHighTemp/StartTimer', 20, 0, 10000],
'inverterhightempstoptimer': ['/Settings/Generator0/InverterHighTemp/StopTimer', 20, 0, 10000],
# VE.Bus overload
'inverteroverloadenabled': ['/Settings/Generator0/InverterOverload/Enabled', 0, 0, 1],
'inverteroverloadstarttimer': ['/Settings/Generator0/InverterOverload/StartTimer', 20, 0, 10000],
'inverteroverloadstoptimer': ['/Settings/Generator0/InverterOverload/StopTimer', 20, 0, 10000],
# TestRun
'testrunenabled': ['/Settings/Generator0/TestRun/Enabled', 0, 0, 1],
'testrunstartdate': ['/Settings/Generator0/TestRun/StartDate', time.time(), 0, 10000000000.1],
'testrunstarttimer': ['/Settings/Generator0/TestRun/StartTime', 54000, 0, 86400],
'testruninterval': ['/Settings/Generator0/TestRun/Interval', 28, 1, 365],
'testrunruntime': ['/Settings/Generator0/TestRun/Duration', 7200, 1, 86400],
'testrunskipruntime': ['/Settings/Generator0/TestRun/SkipRuntime', 0, 0, 100000],
'testruntillbatteryfull': ['/Settings/Generator0/TestRun/RunTillBatteryFull', 0, 0, 1]
},
eventCallback=self._handle_changed_setting)
# Whenever services come or go, we need to check if it was a service we use. Note that this
# is a bit double: DbusMonitor does the same thing. But since we don't use DbusMonitor to
# monitor for com.victronenergy.battery, .vebus, .charger or any other possible source of
# battery data, it is necessary to monitor for changes in the available dbus services.
self._bus.add_signal_receiver(self._dbus_name_owner_changed, signal_name='NameOwnerChanged')
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._update_relay()
self._changed = True
def _evaluate_if_we_are_needed(self):
if self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Function') == 1:
if self._dbusservice is None:
logger.info('Action! Going on dbus and taking control of the relay.')
relay_polarity_import = VeDbusItemImport(
bus=self._bus, serviceName='com.victronenergy.settings',
path='/Settings/Relay/Polarity',
eventCallback=None, createsignal=True)
# As is not possible to keep the relay state during the CCGX power cycles,
# set the relay polarity to normally open.
if relay_polarity_import.get_value() == 1:
relay_polarity_import.set_value(0)
logger.info('Setting relay polarity to normally open.')
# put ourselves on the dbus
self._dbusservice = VeDbusService('com.victronenergy.generator.startstop0')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareversion,
connection='generator',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# State: None = invalid, 0 = stopped, 1 = running
self._dbusservice.add_path('/State', value=0)
# Condition that made the generator start
self._dbusservice.add_path('/RunningByCondition', value='')
# Runtime
self._dbusservice.add_path('/Runtime', value=0, gettextcallback=self._gettext)
# Today runtime
self._dbusservice.add_path('/TodayRuntime', value=0, gettextcallback=self._gettext)
# Test run runtime
self._dbusservice.add_path('/TestRunIntervalRuntime',
value=self._interval_runtime(self._settings['testruninterval']),
gettextcallback=self._gettext)
# Next tes trun date, values is 0 for test run disabled
self._dbusservice.add_path('/NextTestRun', value=None, gettextcallback=self._gettext)
# Next tes trun is needed 1, not needed 0
self._dbusservice.add_path('/SkipTestRun', value=None)
# Manual start
self._dbusservice.add_path('/ManualStart', value=0, writeable=True)
# Manual start timer
self._dbusservice.add_path('/ManualStartTimer', value=0, writeable=True)
# Silent mode active
self._dbusservice.add_path('/QuietHours', value=0)
self._determineservices()
else:
if self._dbusservice is not None:
self._stop_generator()
self._dbusservice.__del__()
self._dbusservice = None
# Reset conditions
for condition in self._condition_stack:
self._reset_condition(self._condition_stack[condition])
logger.info('Relay function is no longer set to generator start/stop: made sure generator is off ' +
'and now going off dbus')
def _device_added(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
self._determineservices()
def _device_removed(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
self._determineservices()
def _dbus_value_changed(self, dbusServiceName, dbusPath, options, changes, deviceInstance):
if dbusPath == '/AutoSelectedBatteryMeasurement' and self._settings['batterymeasurement'] == 'default':
self._determineservices()
if dbusPath == '/Settings/Relay/Function':
self._evaluate_if_we_are_needed()
self._changed = True
# Update relay state when polarity is changed
if dbusPath == '/Settings/Relay/Polarity':
self._update_relay()
def _handle_changed_setting(self, setting, oldvalue, newvalue):
self._changed = True
self._evaluate_if_we_are_needed()
if setting == 'batterymeasurement':
self._determineservices()
# Reset retries and valid if service changes
for condition in self._condition_stack:
if self._condition_stack[condition]['monitoring'] == 'battery':
self._condition_stack[condition]['valid'] = True
self._condition_stack[condition]['retries'] = 0
if setting == 'autostart':
logger.info('Autostart function %s.' % ('enabled' if newvalue == 1 else 'disabled'))
if self._dbusservice is not None and setting == 'testruninterval':
self._dbusservice['/TestRunIntervalRuntime'] = self._interval_runtime(
self._settings['testruninterval'])
def _dbus_name_owner_changed(self, name, oldowner, newowner):
self._determineservices()
def _gettext(self, path, value):
if path == '/NextTestRun':
# Locale format date
d = datetime.datetime.fromtimestamp(value)
return d.strftime('%c')
elif path in ['/Runtime', '/TestRunIntervalRuntime', '/TodayRuntime']:
m, s = divmod(value, 60)
h, m = divmod(m, 60)
return '%dh, %dm, %ds' % (h, m, s)
else:
return value
def _handletimertick(self):
# try catch, to make sure that we kill ourselves on an error. Without this try-catch, there would
# be an error written to stdout, and then the timer would not be restarted, resulting in a dead-
# lock waiting for manual intervention -> not good!
try:
if self._dbusservice is not None:
self._evaluate_startstop_conditions()
self._changed = False
except:
self._stop_generator()
import traceback
traceback.print_exc()
sys.exit(1)
return True
def _evaluate_startstop_conditions(self):
# Conditions will be evaluated in this order
conditions = ['soc', 'acload', 'batterycurrent', 'batteryvoltage', 'inverterhightemp', 'inverteroverload']
start = False
runningbycondition = None
today = calendar.timegm(datetime.date.today().timetuple())
self._timer_runnning = False
values = self._get_updated_values()
connection_lost = False
self._check_quiet_hours()
# New day, register it
if self._last_counters_check < today and self._dbusservice['/State'] == 0:
self._last_counters_check = today
self._update_accumulated_time()
# Update current and accumulated runtime.
if self._dbusservice['/State'] == 1:
self._dbusservice['/Runtime'] = int(time.time() - self._starttime)
# By performance reasons, accumulated runtime is only updated
# once per 10s. When the generator stops is also updated.
if self._dbusservice['/Runtime'] - self._last_runtime_update >= 10:
self._update_accumulated_time()
if self._evaluate_manual_start():
runningbycondition = 'manual'
start = True
# Autostart conditions will only be evaluated if the autostart functionality is enabled
if self._settings['autostart'] == 1:
if self._evaluate_testrun_condition():
runningbycondition = 'testrun'
start = True
# Evaluate value conditions
for condition in conditions:
start = self._evaluate_condition(self._condition_stack[condition], values[condition]) or start
runningbycondition = condition if start and runningbycondition is None else runningbycondition
# Connection lost is set to true if the numbear of retries of one or more enabled conditions
# >= RETRIES_ON_ERROR
if self._condition_stack[condition]['enabled']:
connection_lost = self._condition_stack[condition]['retries'] >= self.RETRIES_ON_ERROR
# If none condition is reached check if connection is lost and start/keep running the generator
# depending on '/OnLossCommunication' setting
if not start and connection_lost:
# Start always
if self._settings['onlosscommunication'] == 1:
start = True
runningbycondition = 'lossofcommunication'
# Keep running if generator already started
if self._dbusservice['/State'] == 1 and self._settings['onlosscommunication'] == 2:
start = True
runningbycondition = 'lossofcommunication'
if start:
self._start_generator(runningbycondition)
elif (self._dbusservice['/Runtime'] >= self._settings['minimumruntime'] * 60
or self._dbusservice['/RunningByCondition'] == 'manual'):
self._stop_generator()
def _reset_condition(self, condition):
condition['reached'] = False
if condition['timed']:
condition['start_timer'] = 0
condition['stop_timer'] = 0
def _check_condition(self, condition, value):
name = condition['name']
if self._settings[name + 'enabled'] == 0:
if condition['enabled']:
condition['enabled'] = False
logger.info('Disabling (%s) condition' % name)
condition['retries'] = 0
condition['valid'] = True
self._reset_condition(condition)
return False
elif not condition['enabled']:
condition['enabled'] = True
logger.info('Enabling (%s) condition' % name)
if (condition['monitoring'] == 'battery') and (self._settings['batterymeasurement'] == 'nobattery'):
return False
if value is None and condition['valid']:
if condition['retries'] >= self.RETRIES_ON_ERROR:
logger.info('Error getting (%s) value, skipping evaluation till get a valid value' % name)
self._reset_condition(condition)
self._comunnication_lost = True
condition['valid'] = False
else:
condition['retries'] += 1
if condition['retries'] == 1 or (condition['retries'] % 10) == 0:
logger.info('Error getting (%s) value, retrying(#%i)' % (name, condition['retries']))
return False
elif value is not None and not condition['valid']:
logger.info('Success getting (%s) value, resuming evaluation' % name)
condition['valid'] = True
condition['retries'] = 0
# Reset retries if value is valid
if value is not None:
condition['retries'] = 0
return condition['valid']
def _evaluate_condition(self, condition, value):
name = condition['name']
setting = ('qh_' if self._dbusservice['/QuietHours'] == 1 else '') + name
startvalue = self._settings[setting + 'start'] if not condition['boolean'] else 1
stopvalue = self._settings[setting + 'stop'] if not condition['boolean'] else 0
# Check if the condition has to be evaluated
if not self._check_condition(condition, value):
# If generator is started by this condition and value is invalid
# wait till RETRIES_ON_ERROR to skip the condition
if condition['reached'] and condition['retries'] <= self.RETRIES_ON_ERROR:
return True
return False
# As this is a generic evaluation method, we need to know how to compare the values
# first check if start value should be greater than stop value and then compare
start_is_greater = startvalue > stopvalue
# When the condition is already reached only the stop value can set it to False
start = condition['reached'] or (value >= startvalue if start_is_greater else value <= startvalue)
stop = value <= stopvalue if start_is_greater else value >= stopvalue
# Timed conditions must start/stop after the condition has been reached for a minimum
# time.
if condition['timed']:
if not condition['reached'] and start:
condition['start_timer'] += time.time() if condition['start_timer'] == 0 else 0
start = time.time() - condition['start_timer'] >= self._settings[name + 'starttimer']
condition['stop_timer'] *= int(not start)
self._timer_runnning = True
else:
condition['start_timer'] = 0
if condition['reached'] and stop:
condition['stop_timer'] += time.time() if condition['stop_timer'] == 0 else 0
stop = time.time() - condition['stop_timer'] >= self._settings[name + 'stoptimer']
condition['stop_timer'] *= int(not stop)
self._timer_runnning = True
else:
condition['stop_timer'] = 0
condition['reached'] = start and not stop
return condition['reached']
def _evaluate_manual_start(self):
if self._dbusservice['/ManualStart'] == 0:
if self._dbusservice['/RunningByCondition'] == 'manual':
self._dbusservice['/ManualStartTimer'] = 0
return False
start = True
# If /ManualStartTimer has a value greater than zero will use it to set a stop timer.
# If no timer is set, the generator will not stop until the user stops it manually.
# Once started by manual start, each evaluation the timer is decreased
if self._dbusservice['/ManualStartTimer'] != 0:
self._manualstarttimer += time.time() if self._manualstarttimer == 0 else 0
self._dbusservice['/ManualStartTimer'] -= int(time.time()) - int(self._manualstarttimer)
self._manualstarttimer = time.time()
start = self._dbusservice['/ManualStartTimer'] > 0
self._dbusservice['/ManualStart'] = int(start)
# Reset if timer is finished
self._manualstarttimer *= int(start)
self._dbusservice['/ManualStartTimer'] *= int(start)
return start
def _evaluate_testrun_condition(self):
if self._settings['testrunenabled'] == 0:
self._dbusservice['/SkipTestRun'] = None
self._dbusservice['/NextTestRun'] = None
return False
today = datetime.date.today()
runtillbatteryfull = self._settings['testruntillbatteryfull'] == 1
soc = self._get_updated_values()['soc']
batteryisfull = runtillbatteryfull and soc == 100
try:
startdate = datetime.date.fromtimestamp(self._settings['testrunstartdate'])
starttime = time.mktime(today.timetuple()) + self._settings['testrunstarttimer']
except ValueError:
logger.debug('Invalid dates, skipping testrun')
return False
# If start date is in the future set as NextTestRun and stop evaluating
if startdate > today:
self._dbusservice['/NextTestRun'] = time.mktime(startdate.timetuple())
return False
start = False
# If the accumulated runtime during the tes trun interval is greater than '/TestRunIntervalRuntime'
# the tes trun must be skipped
needed = (self._settings['testrunskipruntime'] > self._dbusservice['/TestRunIntervalRuntime']
or self._settings['testrunskipruntime'] == 0)
self._dbusservice['/SkipTestRun'] = int(not needed)
interval = self._settings['testruninterval']
stoptime = (starttime + self._settings['testrunruntime']) if not runtillbatteryfull else (starttime + 60)
elapseddays = (today - startdate).days
mod = elapseddays % interval
start = (not bool(mod) and (time.time() >= starttime) and (time.time() <= stoptime))
if runtillbatteryfull:
if soc is not None:
self._testrun_soc_retries = 0
start = (start or self._dbusservice['/RunningByCondition'] == 'testrun') and not batteryisfull
elif self._dbusservice['/RunningByCondition'] == 'testrun':
if self._testrun_soc_retries < self.RETRIES_ON_ERROR:
self._testrun_soc_retries += 1
start = True
if (self._testrun_soc_retries % 10) == 0:
logger.info('Test run failed to get SOC value, retrying(#%i)' % self._testrun_soc_retries)
else:
logger.info('Failed to get SOC after %i retries, terminating test run condition' % self._testrun_soc_retries)
start = False
else:
start = False
if not bool(mod) and (time.time() <= stoptime):
self._dbusservice['/NextTestRun'] = starttime
else:
self._dbusservice['/NextTestRun'] = (time.mktime((today + datetime.timedelta(days=interval - mod)).timetuple()) +
self._settings['testrunstarttimer'])
return start and needed
def _check_quiet_hours(self):
active = False
if self._settings['quiethoursenabled'] == 1:
# Seconds after today 00:00
timeinseconds = time.time() - time.mktime(datetime.date.today().timetuple())
quiethoursstart = self._settings['quiethoursstarttime']
quiethoursend = self._settings['quiethoursendtime']
# Check if the current time is between the start time and end time
if quiethoursstart < quiethoursend:
active = quiethoursstart <= timeinseconds and timeinseconds < quiethoursend
else: # End time is lower than start time, example Start: 21:00, end: 08:00
active = not (quiethoursend < timeinseconds and timeinseconds < quiethoursstart)
if self._dbusservice['/QuietHours'] == 0 and active:
logger.info('Entering to quiet mode')
elif self._dbusservice['/QuietHours'] == 1 and not active:
logger.info('Leaving secondary quiet mode')
self._dbusservice['/QuietHours'] = int(active)
return active
def _update_accumulated_time(self):
seconds = self._dbusservice['/Runtime']
accumulated = seconds - self._last_runtime_update
self._settings['accumulatedtotal'] = int(self._settings['accumulatedtotal']) + accumulated
# Using calendar to get timestamp in UTC, not local time
today_date = str(calendar.timegm(datetime.date.today().timetuple()))
# If something goes wrong getting the json string create a new one
try:
accumulated_days = json.loads(self._settings['accumulateddaily'])
except ValueError:
accumulated_days = {today_date: 0}
if (today_date in accumulated_days):
accumulated_days[today_date] += accumulated
else:
accumulated_days[today_date] = accumulated
self._last_runtime_update = seconds
# Keep the historical with a maximum of HISTORY_DAYS
while len(accumulated_days) > self.HISTORY_DAYS:
accumulated_days.pop(min(accumulated_days.keys()), None)
# Upadate settings
self._settings['accumulateddaily'] = json.dumps(accumulated_days, sort_keys=True)
self._dbusservice['/TodayRuntime'] = self._interval_runtime(0)
self._dbusservice['/TestRunIntervalRuntime'] = self._interval_runtime(self._settings['testruninterval'])
def _interval_runtime(self, days):
summ = 0
try:
daily_record = json.loads(self._settings['accumulateddaily'])
except ValueError:
return 0
for i in range(days + 1):
previous_day = calendar.timegm((datetime.date.today() - datetime.timedelta(days=i)).timetuple())
if str(previous_day) in daily_record.keys():
summ += daily_record[str(previous_day)] if str(previous_day) in daily_record.keys() else 0
return summ
def _get_updated_values(self):
values = {
'batteryvoltage': (self._battery_measurement_voltage_import.get_value()
if self._battery_measurement_voltage_import else None),
'batterycurrent': (self._battery_measurement_current_import.get_value()
if self._battery_measurement_current_import else None),
'soc': self._battery_measurement_soc_import.get_value() if self._battery_measurement_soc_import else None,
'acload': self._dbusmonitor.get_value('com.victronenergy.system', '/Ac/Consumption/Total/Power'),
'inverterhightemp': (self._vebusservice_high_temperature_import.get_value()
if self._vebusservice_high_temperature_import else None),
'inverteroverload': (self._vebusservice_overload_import.get_value()
if self._vebusservice_overload_import else None)
}
if values['batterycurrent']:
values['batterycurrent'] *= -1
return values
def _determineservices(self):
# batterymeasurement is either 'default' or 'com_victronenergy_battery_288/Dc/0'.
# In case it is set to default, we use the AutoSelected battery measurement, given by
# SystemCalc.
batterymeasurement = None
batteryservicename = None
newbatteryservice = None
batteryprefix = ""
selectedbattery = self._settings['batterymeasurement']
vebusservice = None
if selectedbattery == 'default':
batterymeasurement = self._dbusmonitor.get_value('com.victronenergy.system', '/AutoSelectedBatteryMeasurement')
elif len(selectedbattery.split("/", 1)) == 2: # Only very basic sanity checking..
batterymeasurement = self._settings['batterymeasurement']
elif selectedbattery == 'nobattery':
batterymeasurement = None
else:
# Exception: unexpected value for batterymeasurement
pass
if batterymeasurement:
batteryprefix = "/" + batterymeasurement.split("/", 1)[1]
# Get the current battery servicename
if self._battery_measurement_voltage_import:
oldservice = (self._battery_measurement_voltage_import.serviceName +
self._battery_measurement_voltage_import.path.replace("/Voltage", ""))
else:
oldservice = None
if batterymeasurement:
batteryservicename = VeDbusItemImport(
bus=self._bus,
serviceName="com.victronenergy.system",
path='/ServiceMapping/' + batterymeasurement.split("/", 1)[0],
eventCallback=None,
createsignal=False)
if batteryservicename.get_value():
newbatteryservice = batteryservicename.get_value() + batteryprefix
else:
newbatteryservice = None
if batteryservicename and batteryservicename.get_value():
self._battery_measurement_available = True
logger.info('Battery service we need (%s) found! Using it for generator start/stop'
% batterymeasurement)
try:
self._battery_measurement_voltage_import = VeDbusItemImport(
bus=self._bus, serviceName=batteryservicename.get_value(),
path=batteryprefix + '/Voltage', eventCallback=None, createsignal=True)
self._battery_measurement_current_import = VeDbusItemImport(
bus=self._bus, serviceName=batteryservicename.get_value(),
path=batteryprefix + '/Current', eventCallback=None, createsignal=True)
# Exception caused by Matthijs :), we forgot to batteryprefix the Soc during the big path-change...
self._battery_measurement_soc_import = VeDbusItemImport(
bus=self._bus, serviceName=batteryservicename.get_value(),
path='/Soc', eventCallback=None, createsignal=True)
except Exception:
logger.debug('Error getting battery service!')
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
elif selectedbattery == 'nobattery' and self._battery_measurement_available:
logger.info('Battery monitoring disabled! Stop evaluating related conditions')
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = False
elif batteryservicename and batteryservicename.get_value() is None and self._battery_measurement_available:
logger.info('Battery service we need (%s) is not available! Stop evaluating related conditions'
% batterymeasurement)
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = False
# Get the default VE.Bus service and import high temperature and overload warnings
vebusservice = VeDbusItemImport(
bus=self._bus,
serviceName="com.victronenergy.system",
path='/VebusService',
eventCallback=None,
createsignal=False)
if vebusservice.get_value() and (vebusservice.get_value() != self._vebusservice
or not self._vebusservice_available):
self._vebusservice = vebusservice.get_value()
self._vebusservice_available = True
logger.info('Vebus service (%s) found! Using it for generator start/stop'
% vebusservice.get_value())
try:
self._vebusservice_high_temperature_import = VeDbusItemImport(
bus=self._bus, serviceName=vebusservice.get_value(),
path='/Alarms/HighTemperature', eventCallback=None, createsignal=True)
self._vebusservice_overload_import = VeDbusItemImport(
bus=self._bus, serviceName=vebusservice.get_value(),
path='/Alarms/Overload', eventCallback=None, createsignal=True)
except Exception:
logger.info('Error getting Vebus service!')
self._vebusservice_available = False
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
elif not vebusservice.get_value() and self._vebusservice_available:
logger.info('Vebus service (%s) dissapeared! Stop evaluating related conditions'
% self._vebusservice)
self._vebusservice_available = False
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
# Trigger an immediate check of system status
self._changed = True
def _start_generator(self, condition):
# This function will start the generator in the case generator not
# already running. When differs, the RunningByCondition is updated
if self._dbusservice['/State'] == 0:
self._dbusservice['/State'] = 1
self._update_relay()
self._starttime = time.time()
logger.info('Starting generator by %s condition' % condition)
elif self._dbusservice['/RunningByCondition'] != condition:
logger.info('Generator previously running by %s condition is now running by %s condition'
% (self._dbusservice['/RunningByCondition'], condition))
self._dbusservice['/RunningByCondition'] = condition
def _stop_generator(self):
if self._dbusservice['/State'] == 1:
self._dbusservice['/State'] = 0
self._update_relay()
logger.info('Stopping generator that was running by %s condition' %
str(self._dbusservice['/RunningByCondition']))
self._dbusservice['/RunningByCondition'] = ''
self._update_accumulated_time()
self._starttime = 0
self._dbusservice['/Runtime'] = 0
self._dbusservice['/ManualStartTimer'] = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
def _update_relay(self):
# Relay polarity 0 = NO, 1 = NC
polarity = bool(self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Polarity'))
w = int(not polarity) if bool(self._dbusservice['/State']) else int(polarity)
try:
f = open(self.RELAY_GPIO_FILE, 'w')
f.write(str(w))
f.close()
except IOError:
logger.info('Error writting to the relay GPIO file!: %s' % self.RELAY_GPIO_FILE)
def __init__(self,
dbusmonitor_gen=None,
dbusservice_gen=None,
settings_device_gen=None):
self.STATE_IDLE = 0
self.STATE_CHARGING = 1
self.STATE_DISCHARGING = 2
self.BATSERVICE_DEFAULT = 'default'
self.BATSERVICE_NOBATTERY = 'nobattery'
# Why this dummy? Because DbusMonitor expects these values to be there, even though we don't
# need them. So just add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {
'code': None,
'whenToLog': 'configChange',
'accessLevel': None
}
dbus_tree = {
'com.victronenergy.solarcharger': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy
},
'com.victronenergy.pvinverter': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy,
'/Position': dummy,
'/ProductId': dummy
},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy,
'/TimeToGo': dummy,
'/ConsumedAmphours': dummy,
'/ProductId': dummy
},
'com.victronenergy.vebus': {
'/Ac/ActiveIn/ActiveInput': dummy,
'/Ac/ActiveIn/L1/P': dummy,
'/Ac/ActiveIn/L2/P': dummy,
'/Ac/ActiveIn/L3/P': dummy,
'/Ac/Out/L1/P': dummy,
'/Ac/Out/L2/P': dummy,
'/Ac/Out/L3/P': dummy,
'/Connected': dummy,
'/Hub4/AcPowerSetpoint': dummy,
'/ProductId': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Mode': dummy,
'/State': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy
},
'com.victronenergy.charger': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy
},
'com.victronenergy.grid': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId': dummy,
'/DeviceType': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy
},
'com.victronenergy.genset': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId': dummy,
'/DeviceType': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy
},
'com.victronenergy.settings': {
'/Settings/SystemSetup/AcInput1': dummy,
'/Settings/SystemSetup/AcInput2': dummy
}
}
if dbusmonitor_gen is None:
self._dbusmonitor = DbusMonitor(dbus_tree,
self._dbus_value_changed,
self._device_added,
self._device_removed)
else:
self._dbusmonitor = dbusmonitor_gen(dbus_tree)
# Connect to localsettings
supported_settings = {
'batteryservice': [
'/Settings/SystemSetup/BatteryService',
self.BATSERVICE_DEFAULT, 0, 0
],
'hasdcsystem': ['/Settings/SystemSetup/HasDcSystem', 0, 0, 1],
'writevebussoc': ['/Settings/SystemSetup/WriteVebusSoc', 0, 0, 1]
}
if settings_device_gen is None:
self._settings = SettingsDevice(
bus=dbus.SessionBus() if 'DBUS_SESSION_BUS_ADDRESS'
in os.environ else dbus.SystemBus(),
supportedSettings=supported_settings,
eventCallback=self._handlechangedsetting)
else:
self._settings = settings_device_gen(supported_settings,
self._handlechangedsetting)
# put ourselves on the dbus
if dbusservice_gen is None:
self._dbusservice = VeDbusService('com.victronenergy.system')
else:
self._dbusservice = dbusservice_gen('com.victronenergy.system')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareVersion,
connection='data from other dbus processes',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# At this moment, VRM portal ID is the MAC address of the CCGX. Anyhow, it should be string uniquely
# identifying the CCGX.
self._dbusservice.add_path('/Serial',
value=get_vrm_portal_id(),
gettextcallback=lambda x: str(x))
self._dbusservice.add_path('/Relay/0/State',
value=None,
writeable=True,
onchangecallback=lambda p, v: exit_on_error(
self._on_relay_state_changed, p, v))
self._dbusservice.add_path('/AvailableBatteryServices',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/AvailableBatteryMeasurements', value=None)
self._dbusservice.add_path('/AutoSelectedBatteryService',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/AutoSelectedBatteryMeasurement',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/ActiveBatteryService',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/PvInvertersProductIds', value=None)
self._dbusservice.add_path('/Dc/Battery/Alarms/CircuitBreakerTripped',
value=None)
self._summeditems = {
'/Ac/Grid/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/Grid/ProductId': {
'gettext': '%s'
},
'/Ac/Grid/DeviceType': {
'gettext': '%s'
},
'/Ac/Genset/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/Genset/ProductId': {
'gettext': '%s'
},
'/Ac/Genset/DeviceType': {
'gettext': '%s'
},
'/Ac/Consumption/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/NumberOfPhases': {
'gettext': '%d'
},
'/Ac/PvOnGenset/Total/Power': {
'gettext': '%.0F W'
},
'/Dc/Pv/Power': {
'gettext': '%.0F W'
},
'/Dc/Pv/Current': {
'gettext': '%.1F A'
},
'/Dc/Battery/Voltage': {
'gettext': '%.2F V'
},
'/Dc/Battery/Current': {
'gettext': '%.1F A'
},
'/Dc/Battery/Power': {
'gettext': '%.0F W'
},
'/Dc/Battery/Soc': {
'gettext': '%.0F %%'
},
'/Dc/Battery/State': {
'gettext': '%s'
},
'/Dc/Battery/TimeToGo': {
'gettext': '%.0F s'
},
'/Dc/Battery/ConsumedAmphours': {
'gettext': '%.1F Ah'
},
'/Dc/Charger/Power': {
'gettext': '%.0F %%'
},
'/Dc/Vebus/Current': {
'gettext': '%.1F A'
},
'/Dc/Vebus/Power': {
'gettext': '%.0F W'
},
'/Dc/System/Power': {
'gettext': '%.0F W'
},
'/Hub': {
'gettext': '%s'
},
'/Ac/ActiveIn/Source': {
'gettext': '%s'
},
'/VebusService': {
'gettext': '%s'
}
}
for path in self._summeditems.keys():
self._dbusservice.add_path(path,
value=None,
gettextcallback=self._gettext)
self._batteryservice = None
self._determinebatteryservice()
self._supervised = {}
self._lg_battery = None
if self._batteryservice is None:
logger.info("Battery service initialized to None (setting == %s)" %
self._settings['batteryservice'])
self._changed = True
for service, instance in self._dbusmonitor.get_service_list().items():
self._device_added(service, instance, do_service_change=False)
self._handleservicechange()
self._updatevalues()
try:
self._relay_file_read = open(relayGpioFile, 'rt')
self._relay_file_write = open(relayGpioFile, 'wt')
self._update_relay_state()
gobject.timeout_add(5000, exit_on_error, self._update_relay_state)
except IOError:
self._relay_file_read = None
self._relay_file_write = None
logging.warn('Could not open %s (relay)' % relayGpioFile)
self._writeVebusSocCounter = 9
gobject.timeout_add(1000, exit_on_error, self._handletimertick)
gobject.timeout_add(60000, exit_on_error, self._process_supervised)
class SystemCalc:
def __init__(self,
dbusmonitor_gen=None,
dbusservice_gen=None,
settings_device_gen=None):
self.STATE_IDLE = 0
self.STATE_CHARGING = 1
self.STATE_DISCHARGING = 2
self.BATSERVICE_DEFAULT = 'default'
self.BATSERVICE_NOBATTERY = 'nobattery'
# Why this dummy? Because DbusMonitor expects these values to be there, even though we don't
# need them. So just add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {
'code': None,
'whenToLog': 'configChange',
'accessLevel': None
}
dbus_tree = {
'com.victronenergy.solarcharger': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy
},
'com.victronenergy.pvinverter': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy,
'/Position': dummy,
'/ProductId': dummy
},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy,
'/TimeToGo': dummy,
'/ConsumedAmphours': dummy,
'/ProductId': dummy
},
'com.victronenergy.vebus': {
'/Ac/ActiveIn/ActiveInput': dummy,
'/Ac/ActiveIn/L1/P': dummy,
'/Ac/ActiveIn/L2/P': dummy,
'/Ac/ActiveIn/L3/P': dummy,
'/Ac/Out/L1/P': dummy,
'/Ac/Out/L2/P': dummy,
'/Ac/Out/L3/P': dummy,
'/Connected': dummy,
'/Hub4/AcPowerSetpoint': dummy,
'/ProductId': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Mode': dummy,
'/State': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy
},
'com.victronenergy.charger': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy
},
'com.victronenergy.grid': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId': dummy,
'/DeviceType': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy
},
'com.victronenergy.genset': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId': dummy,
'/DeviceType': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy
},
'com.victronenergy.settings': {
'/Settings/SystemSetup/AcInput1': dummy,
'/Settings/SystemSetup/AcInput2': dummy
}
}
if dbusmonitor_gen is None:
self._dbusmonitor = DbusMonitor(dbus_tree,
self._dbus_value_changed,
self._device_added,
self._device_removed)
else:
self._dbusmonitor = dbusmonitor_gen(dbus_tree)
# Connect to localsettings
supported_settings = {
'batteryservice': [
'/Settings/SystemSetup/BatteryService',
self.BATSERVICE_DEFAULT, 0, 0
],
'hasdcsystem': ['/Settings/SystemSetup/HasDcSystem', 0, 0, 1],
'writevebussoc': ['/Settings/SystemSetup/WriteVebusSoc', 0, 0, 1]
}
if settings_device_gen is None:
self._settings = SettingsDevice(
bus=dbus.SessionBus() if 'DBUS_SESSION_BUS_ADDRESS'
in os.environ else dbus.SystemBus(),
supportedSettings=supported_settings,
eventCallback=self._handlechangedsetting)
else:
self._settings = settings_device_gen(supported_settings,
self._handlechangedsetting)
# put ourselves on the dbus
if dbusservice_gen is None:
self._dbusservice = VeDbusService('com.victronenergy.system')
else:
self._dbusservice = dbusservice_gen('com.victronenergy.system')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareVersion,
connection='data from other dbus processes',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# At this moment, VRM portal ID is the MAC address of the CCGX. Anyhow, it should be string uniquely
# identifying the CCGX.
self._dbusservice.add_path('/Serial',
value=get_vrm_portal_id(),
gettextcallback=lambda x: str(x))
self._dbusservice.add_path('/Relay/0/State',
value=None,
writeable=True,
onchangecallback=lambda p, v: exit_on_error(
self._on_relay_state_changed, p, v))
self._dbusservice.add_path('/AvailableBatteryServices',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/AvailableBatteryMeasurements', value=None)
self._dbusservice.add_path('/AutoSelectedBatteryService',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/AutoSelectedBatteryMeasurement',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/ActiveBatteryService',
value=None,
gettextcallback=self._gettext)
self._dbusservice.add_path('/PvInvertersProductIds', value=None)
self._dbusservice.add_path('/Dc/Battery/Alarms/CircuitBreakerTripped',
value=None)
self._summeditems = {
'/Ac/Grid/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/Grid/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/Grid/ProductId': {
'gettext': '%s'
},
'/Ac/Grid/DeviceType': {
'gettext': '%s'
},
'/Ac/Genset/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/Genset/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/Genset/ProductId': {
'gettext': '%s'
},
'/Ac/Genset/DeviceType': {
'gettext': '%s'
},
'/Ac/Consumption/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/Consumption/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnOutput/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/Total/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGrid/NumberOfPhases': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/L1/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/L2/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/L3/Power': {
'gettext': '%.0F W'
},
'/Ac/PvOnGenset/NumberOfPhases': {
'gettext': '%d'
},
'/Ac/PvOnGenset/Total/Power': {
'gettext': '%.0F W'
},
'/Dc/Pv/Power': {
'gettext': '%.0F W'
},
'/Dc/Pv/Current': {
'gettext': '%.1F A'
},
'/Dc/Battery/Voltage': {
'gettext': '%.2F V'
},
'/Dc/Battery/Current': {
'gettext': '%.1F A'
},
'/Dc/Battery/Power': {
'gettext': '%.0F W'
},
'/Dc/Battery/Soc': {
'gettext': '%.0F %%'
},
'/Dc/Battery/State': {
'gettext': '%s'
},
'/Dc/Battery/TimeToGo': {
'gettext': '%.0F s'
},
'/Dc/Battery/ConsumedAmphours': {
'gettext': '%.1F Ah'
},
'/Dc/Charger/Power': {
'gettext': '%.0F %%'
},
'/Dc/Vebus/Current': {
'gettext': '%.1F A'
},
'/Dc/Vebus/Power': {
'gettext': '%.0F W'
},
'/Dc/System/Power': {
'gettext': '%.0F W'
},
'/Hub': {
'gettext': '%s'
},
'/Ac/ActiveIn/Source': {
'gettext': '%s'
},
'/VebusService': {
'gettext': '%s'
}
}
for path in self._summeditems.keys():
self._dbusservice.add_path(path,
value=None,
gettextcallback=self._gettext)
self._batteryservice = None
self._determinebatteryservice()
self._supervised = {}
self._lg_battery = None
if self._batteryservice is None:
logger.info("Battery service initialized to None (setting == %s)" %
self._settings['batteryservice'])
self._changed = True
for service, instance in self._dbusmonitor.get_service_list().items():
self._device_added(service, instance, do_service_change=False)
self._handleservicechange()
self._updatevalues()
try:
self._relay_file_read = open(relayGpioFile, 'rt')
self._relay_file_write = open(relayGpioFile, 'wt')
self._update_relay_state()
gobject.timeout_add(5000, exit_on_error, self._update_relay_state)
except IOError:
self._relay_file_read = None
self._relay_file_write = None
logging.warn('Could not open %s (relay)' % relayGpioFile)
self._writeVebusSocCounter = 9
gobject.timeout_add(1000, exit_on_error, self._handletimertick)
gobject.timeout_add(60000, exit_on_error, self._process_supervised)
def _handlechangedsetting(self, setting, oldvalue, newvalue):
self._determinebatteryservice()
self._changed = True
def _determinebatteryservice(self):
auto_battery_service = self._autoselect_battery_service()
auto_battery_measurement = None
if auto_battery_service is not None:
services = self._dbusmonitor.get_service_list()
if auto_battery_service in services:
auto_battery_measurement = \
self._get_instance_service_name(auto_battery_service, services[auto_battery_service])
auto_battery_measurement = auto_battery_measurement.replace(
'.', '_').replace('/', '_') + '/Dc/0'
self._dbusservice[
'/AutoSelectedBatteryMeasurement'] = auto_battery_measurement
if self._settings['batteryservice'] == self.BATSERVICE_DEFAULT:
newbatteryservice = auto_battery_service
self._dbusservice['/AutoSelectedBatteryService'] = (
'No battery monitor found' if newbatteryservice is None else
self._get_readable_service_name(newbatteryservice))
elif self._settings['batteryservice'] == self.BATSERVICE_NOBATTERY:
self._dbusservice['/AutoSelectedBatteryService'] = None
newbatteryservice = None
else:
self._dbusservice['/AutoSelectedBatteryService'] = None
s = self._settings['batteryservice'].split('/')
if len(s) != 2:
logger.error("The battery setting (%s) is invalid!" %
self._settings['batteryservice'])
serviceclass = s[0]
instance = int(s[1]) if len(s) == 2 else None
services = self._dbusmonitor.get_service_list(
classfilter=serviceclass)
if instance not in services.values():
# Once chosen battery monitor does not exist. Don't auto change the setting (it might come
# back). And also don't autoselect another.
newbatteryservice = None
else:
# According to https://www.python.org/dev/peps/pep-3106/, dict.keys() and dict.values()
# always have the same order.
newbatteryservice = services.keys()[services.values().index(
instance)]
if newbatteryservice != self._batteryservice:
services = self._dbusmonitor.get_service_list()
instance = services.get(newbatteryservice, None)
if instance is None:
battery_service = None
else:
battery_service = self._get_instance_service_name(
newbatteryservice, instance)
self._dbusservice['/ActiveBatteryService'] = battery_service
logger.info(
"Battery service, setting == %s, changed from %s to %s (%s)" %
(self._settings['batteryservice'], self._batteryservice,
newbatteryservice, instance))
self._batteryservice = newbatteryservice
def _autoselect_battery_service(self):
# Default setting business logic:
# first try to use a battery service (BMV or Lynx Shunt VE.Can). If there
# is more than one battery service, just use a random one. If no battery service is
# available, check if there are not Solar chargers and no normal chargers. If they are not
# there, assume this is a hub-2, hub-3 or hub-4 system and use VE.Bus SOC.
batteries = self._get_connected_service_list(
'com.victronenergy.battery')
if len(batteries) > 0:
return sorted(batteries)[0] # Pick a random battery service
if self._get_first_connected_service(
'com.victronenergy.solarcharger') is not None:
return None
if self._get_first_connected_service(
'com.victronenergy.charger') is not None:
return None
vebus_services = self._get_first_connected_service(
'com.victronenergy.vebus')
if vebus_services is None:
return None
return vebus_services[0]
# Called on a one second timer
def _handletimertick(self):
if self._changed:
self._updatevalues()
self._changed = False
self._writeVebusSocCounter += 1
if self._writeVebusSocCounter >= 10:
self._writeVebusSoc()
self._writeVebusSocCounter = 0
return True # keep timer running
def _writeVebusSoc(self):
# ==== COPY BATTERY SOC TO VEBUS ====
if self._settings['writevebussoc'] and self._dbusservice['/VebusService'] and self._dbusservice['/Dc/Battery/Soc'] and \
self._batteryservice.split('.')[2] != 'vebus':
logger.debug("writing this soc to vebus: %d",
self._dbusservice['/Dc/Battery/Soc'])
self._dbusmonitor.get_item(
self._dbusservice['/VebusService'],
'/Soc').set_value(self._dbusservice['/Dc/Battery/Soc'])
def _updatepvinverterspidlist(self):
# Create list of connected pv inverters id's
pvinverters = self._dbusmonitor.get_service_list(
'com.victronenergy.pvinverter')
productids = []
for pvinverter in pvinverters:
pid = self._dbusmonitor.get_value(pvinverter, '/ProductId')
if pid is not None and pid not in productids:
productids.append(pid)
self._dbusservice['/PvInvertersProductIds'] = dbus.Array(productids,
signature='i')
def _updatevalues(self):
# ==== PREPARATIONS ====
# Determine values used in logic below
vebusses = self._dbusmonitor.get_service_list(
'com.victronenergy.vebus')
vebuspower = 0
for vebus in vebusses:
v = self._dbusmonitor.get_value(vebus, '/Dc/0/Voltage')
i = self._dbusmonitor.get_value(vebus, '/Dc/0/Current')
if v is not None and i is not None:
vebuspower += v * i
# ==== PVINVERTERS ====
pvinverters = self._dbusmonitor.get_service_list(
'com.victronenergy.pvinverter')
newvalues = {}
pos = {0: '/Ac/PvOnGrid', 1: '/Ac/PvOnOutput', 2: '/Ac/PvOnGenset'}
total = {0: None, 1: None, 2: None}
for pvinverter in pvinverters:
# Position will be None if PV inverter service has just been removed (after retrieving the
# service list).
position = pos.get(
self._dbusmonitor.get_value(pvinverter, '/Position'))
if position is not None:
for phase in range(1, 4):
power = self._dbusmonitor.get_value(
pvinverter, '/Ac/L%s/Power' % phase)
if power is not None:
path = '%s/L%s/Power' % (position, phase)
newvalues[path] = _safeadd(newvalues.get(path), power)
for path in pos.values():
self._compute_phase_totals(path, newvalues)
# ==== SOLARCHARGERS ====
solarchargers = self._dbusmonitor.get_service_list(
'com.victronenergy.solarcharger')
solarcharger_batteryvoltage = None
for solarcharger in solarchargers:
v = self._dbusmonitor.get_value(solarcharger, '/Dc/0/Voltage')
if v is None:
continue
i = self._dbusmonitor.get_value(solarcharger, '/Dc/0/Current')
if i is None:
continue
if '/Dc/Pv/Power' not in newvalues:
newvalues['/Dc/Pv/Power'] = v * i
newvalues['/Dc/Pv/Current'] = i
solarcharger_batteryvoltage = v
else:
newvalues['/Dc/Pv/Power'] += v * i
newvalues['/Dc/Pv/Current'] += i
# ==== CHARGERS ====
chargers = self._dbusmonitor.get_service_list(
'com.victronenergy.charger')
charger_batteryvoltage = None
for charger in chargers:
# Assume the battery connected to output 0 is the main battery
v = self._dbusmonitor.get_value(charger, '/Dc/0/Voltage')
if v is None:
continue
charger_batteryvoltage = v
i = self._dbusmonitor.get_value(charger, '/Dc/0/Current')
if i is None:
continue
if '/Dc/Charger/Power' not in newvalues:
newvalues['/Dc/Charger/Power'] = v * i
else:
newvalues['/Dc/Charger/Power'] += v * i
# ==== BATTERY ====
if self._batteryservice is not None:
batteryservicetype = self._batteryservice.split('.')[
2] # either 'battery' or 'vebus'
newvalues['/Dc/Battery/Soc'] = self._dbusmonitor.get_value(
self._batteryservice, '/Soc')
newvalues['/Dc/Battery/TimeToGo'] = self._dbusmonitor.get_value(
self._batteryservice, '/TimeToGo')
newvalues[
'/Dc/Battery/ConsumedAmphours'] = self._dbusmonitor.get_value(
self._batteryservice, '/ConsumedAmphours')
if batteryservicetype == 'battery':
newvalues['/Dc/Battery/Voltage'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/Voltage')
newvalues['/Dc/Battery/Current'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/Current')
newvalues['/Dc/Battery/Power'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/Power')
elif batteryservicetype == 'vebus':
newvalues['/Dc/Battery/Voltage'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/Voltage')
newvalues['/Dc/Battery/Current'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/Current')
if newvalues['/Dc/Battery/Voltage'] is not None and newvalues[
'/Dc/Battery/Current'] is not None:
newvalues['/Dc/Battery/Power'] = (
newvalues['/Dc/Battery/Voltage'] *
newvalues['/Dc/Battery/Current'])
p = newvalues.get('/Dc/Battery/Power', None)
if p is not None:
if p > 30:
newvalues['/Dc/Battery/State'] = self.STATE_CHARGING
elif p < -30:
newvalues['/Dc/Battery/State'] = self.STATE_DISCHARGING
else:
newvalues['/Dc/Battery/State'] = self.STATE_IDLE
else:
batteryservicetype = None
if solarcharger_batteryvoltage is not None:
newvalues['/Dc/Battery/Voltage'] = solarcharger_batteryvoltage
elif charger_batteryvoltage is not None:
newvalues['/Dc/Battery/Voltage'] = charger_batteryvoltage
else:
# CCGX-connected system consists of only a Multi, but it is not user-selected, nor
# auto-selected as the battery-monitor, probably because there are other loads or chargers.
# In that case, at least use its reported battery voltage.
vebusses = self._dbusmonitor.get_service_list(
'com.victronenergy.vebus')
for vebus in vebusses:
v = self._dbusmonitor.get_value(vebus, '/Dc/0/Voltage')
if v is not None:
newvalues['/Dc/Battery/Voltage'] = v
if self._settings[
'hasdcsystem'] == 0 and '/Dc/Battery/Voltage' in newvalues:
# No unmonitored DC loads or chargers, and also no battery monitor: derive battery watts
# and amps from vebus, solarchargers and chargers.
assert '/Dc/Battery/Power' not in newvalues
assert '/Dc/Battery/Current' not in newvalues
p = newvalues.get('/Dc/Pv/Power', 0) + newvalues.get(
'/Dc/Charger/Power', 0) + vebuspower
voltage = newvalues['/Dc/Battery/Voltage']
newvalues[
'/Dc/Battery/Current'] = p / voltage if voltage > 0 else None
newvalues['/Dc/Battery/Power'] = p
# ==== SYSTEM ====
if self._settings[
'hasdcsystem'] == 1 and batteryservicetype == 'battery':
# Calculate power being generated/consumed by not measured devices in the network.
# /Dc/System: positive: consuming power
# VE.Bus: Positive: current flowing from the Multi to the dc system or battery
# Solarcharger & other chargers: positive: charging
# battery: Positive: charging battery.
# battery = solarcharger + charger + ve.bus - system
battery_power = newvalues.get('/Dc/Battery/Power')
if battery_power is not None:
dc_pv_power = newvalues.get('/Dc/Pv/Power', 0)
charger_power = newvalues.get('/Dc/Charger/Power', 0)
newvalues[
'/Dc/System/Power'] = dc_pv_power + charger_power + vebuspower - battery_power
# ==== Vebus ====
# Assume there's only 1 multi service present on the D-Bus
multi = self._get_first_connected_service('com.victronenergy.vebus')
multi_path = None
if multi is not None:
multi_path = multi[0]
dc_current = self._dbusmonitor.get_value(multi_path,
'/Dc/0/Current')
newvalues['/Dc/Vebus/Current'] = dc_current
dc_power = self._dbusmonitor.get_value(multi_path, '/Dc/0/Power')
# Just in case /Dc/0/Power is not available
if dc_power == None and dc_current is not None:
dc_voltage = self._dbusmonitor.get_value(
multi_path, '/Dc/0/Voltage')
if dc_voltage is not None:
dc_power = dc_voltage * dc_current
# Note that there is also vebuspower, which is the total DC power summed over all multis.
# However, this value cannot be combined with /Dc/Multi/Current, because it does not make sense
# to add the Dc currents of all multis if they do not share the same DC voltage.
newvalues['/Dc/Vebus/Power'] = dc_power
newvalues['/VebusService'] = multi_path
# ===== AC IN SOURCE =====
ac_in_source = None
active_input = self._dbusmonitor.get_value(multi_path,
'/Ac/ActiveIn/ActiveInput')
if active_input is not None:
settings_path = '/Settings/SystemSetup/AcInput%s' % (active_input +
1)
ac_in_source = self._dbusmonitor.get_value(
'com.victronenergy.settings', settings_path)
newvalues['/Ac/ActiveIn/Source'] = ac_in_source
# ===== HUB MODE =====
# The code below should be executed after PV inverter data has been updated, because we need the
# PV inverter total power to update the consumption.
hub = None
if self._dbusmonitor.get_value(multi_path,
'/Hub4/AcPowerSetpoint') is not None:
hub = 4
elif newvalues.get('/Dc/Pv/Power', None) is not None:
hub = 1
elif newvalues.get('/Ac/PvOnOutput/Total/Power', None) is not None:
hub = 2
elif newvalues.get('/Ac/PvOnGrid/Total/Power', None) is not None or \
newvalues.get('/Ac/PvOnGenset/Total/Power', None) is not None:
hub = 3
newvalues['/Hub'] = hub
# ===== GRID METERS & CONSUMPTION ====
consumption = {"L1": None, "L2": None, "L3": None}
for device_type in ['Grid', 'Genset']:
servicename = 'com.victronenergy.%s' % device_type.lower()
energy_meter = self._get_first_connected_service(servicename)
em_service = None if energy_meter is None else energy_meter[0]
uses_active_input = False
if multi_path is not None:
# If a grid meter is present we use values from it. If not, we look at the multi. If it has
# AcIn1 or AcIn2 connected to the grid, we use those values.
# com.victronenergy.grid.??? indicates presence of an energy meter used as grid meter.
# com.victronenergy.vebus.???/Ac/ActiveIn/ActiveInput: decides which whether we look at AcIn1
# or AcIn2 as possible grid connection.
if ac_in_source is not None:
uses_active_input = ac_in_source > 0 and (
ac_in_source == 2) == (device_type == 'Genset')
for phase in consumption:
p = None
pvpower = newvalues.get('/Ac/PvOn%s/%s/Power' %
(device_type, phase))
if em_service is not None:
p = self._dbusmonitor.get_value(em_service,
'/Ac/%s/Power' % phase)
# Compute consumption between energy meter and multi (meter power - multi AC in) and
# add an optional PV inverter on input to the mix.
c = None
if uses_active_input:
ac_in = self._dbusmonitor.get_value(
multi_path, '/Ac/ActiveIn/%s/P' % phase)
if ac_in is not None:
c = _safeadd(c, -ac_in)
# If there's any power coming from a PV inverter in the inactive AC in (which is unlikely),
# it will still be used, because there may also be a load in the same ACIn consuming
# power, or the power could be fed back to the net.
c = _safeadd(c, p, pvpower)
consumption[phase] = _safeadd(consumption[phase],
_safemax(0, c))
else:
if uses_active_input:
p = self._dbusmonitor.get_value(
multi_path, '/Ac/ActiveIn/%s/P' % phase)
# No relevant energy meter present. Assume there is no load between the grid and the multi.
# There may be a PV inverter present though (Hub-3 setup).
if pvpower != None:
p = _safeadd(p, -pvpower)
newvalues['/Ac/%s/%s/Power' % (device_type, phase)] = p
self._compute_phase_totals('/Ac/%s' % device_type, newvalues)
product_id = None
device_type_id = None
if em_service is not None:
product_id = self._dbusmonitor.get_value(
em_service, '/ProductId')
device_type_id = self._dbusmonitor.get_value(
em_service, '/DeviceType')
if product_id is None and uses_active_input:
product_id = self._dbusmonitor.get_value(
multi_path, '/ProductId')
newvalues['/Ac/%s/ProductId' % device_type] = product_id
newvalues['/Ac/%s/DeviceType' % device_type] = device_type_id
for phase in consumption:
c = newvalues.get('/Ac/PvOnOutput/%s/Power' % phase)
if multi_path is not None:
ac_out = self._dbusmonitor.get_value(multi_path,
'/Ac/Out/%s/P' % phase)
c = _safeadd(c, ac_out)
newvalues['/Ac/Consumption/%s/Power' % phase] = _safeadd(
consumption[phase], _safemax(0, c))
self._compute_phase_totals('/Ac/Consumption', newvalues)
self._check_lg_battery(multi_path)
# ==== UPDATE DBUS ITEMS ====
for path in self._summeditems.keys():
# Why the None? Because we want to invalidate things we don't have anymore.
self._dbusservice[path] = newvalues.get(path, None)
def _handleservicechange(self):
# Update the available battery monitor services, used to populate the dropdown in the settings.
# Below code makes a dictionary. The key is [dbuserviceclass]/[deviceinstance]. For example
# "battery/245". The value is the name to show to the user in the dropdown. The full dbus-
# servicename, ie 'com.victronenergy.vebus.ttyO1' is not used, since the last part of that is not
# fixed. dbus-serviceclass name and the device instance are already fixed, so best to use those.
services = self._get_connected_service_list('com.victronenergy.vebus')
services.update(
self._get_connected_service_list('com.victronenergy.battery'))
ul = {
self.BATSERVICE_DEFAULT: 'Automatic',
self.BATSERVICE_NOBATTERY: 'No battery monitor'
}
for servicename, instance in services.items():
key = self._get_instance_service_name(servicename, instance)
ul[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableBatteryServices'] = json.dumps(ul)
ul = {
self.BATSERVICE_DEFAULT: 'Automatic',
self.BATSERVICE_NOBATTERY: 'No battery monitor'
}
# For later: for device supporting multiple Dc measurement we should add entries for /Dc/1 etc as
# well.
for servicename, instance in services.items():
key = self._get_instance_service_name(
servicename, instance).replace('.', '_').replace('/',
'_') + '/Dc/0'
ul[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableBatteryMeasurements'] = dbus.Dictionary(
ul, signature='sv')
self._determinebatteryservice()
self._updatepvinverterspidlist()
self._changed = True
def _get_readable_service_name(self, servicename):
return (self._dbusmonitor.get_value(servicename, '/ProductName') +
' on ' +
self._dbusmonitor.get_value(servicename, '/Mgmt/Connection'))
def _get_instance_service_name(self, service, instance):
return '%s/%s' % ('.'.join(service.split('.')[0:3]), instance)
def _get_service_mapping_path(self, service, instance):
sn = self._get_instance_service_name(service, instance).replace(
'.', '_').replace('/', '_')
return '/ServiceMapping/%s' % sn
def _remove_unconnected_services(self, services):
# Workaround: because com.victronenergy.vebus is available even when there is no vebus product
# connected. Remove any that is not connected. For this, we use /State since mandatory path
# /Connected is not implemented in mk2dbus.
for servicename in services.keys():
if ((servicename.split('.')[2] == 'vebus' and
self._dbusmonitor.get_value(servicename, '/State') is None) or
self._dbusmonitor.get_value(servicename, '/Connected') != 1
or self._dbusmonitor.get_value(servicename, '/ProductName')
is None or self._dbusmonitor.get_value(
servicename, '/Mgmt/Connection') is None):
del services[servicename]
def _dbus_value_changed(self, dbusServiceName, dbusPath, dict, changes,
deviceInstance):
self._changed = True
# Workaround because com.victronenergy.vebus is available even when there is no vebus product
# connected.
if (dbusPath in ['/Connected', '/ProductName', '/Mgmt/Connection']
or (dbusPath == '/State' and dbusServiceName.split('.')[0:3]
== ['com', 'victronenergy', 'vebus'])):
self._handleservicechange()
def _device_added(self, service, instance, do_service_change=True):
path = self._get_service_mapping_path(service, instance)
if path in self._dbusservice:
self._dbusservice[path] = service
else:
self._dbusservice.add_path(path, service)
if do_service_change:
self._handleservicechange()
service_type = service.split('.')[2]
if service_type == 'battery' or service_type == 'solarcharger':
try:
proxy = self._dbusmonitor.dbusConn.get_object(service,
'/ProductId',
introspect=False)
method = proxy.get_dbus_method('GetValue')
self._supervised[service] = method
except dbus.DBusException:
pass
if service_type == 'battery' and self._dbusmonitor.get_value(
service, '/ProductId') == 0xB004:
logging.info('LG battery service appeared: %s' % service)
self._lg_battery = service
self._lg_voltage_buffer = []
self._dbusservice['/Dc/Battery/Alarms/CircuitBreakerTripped'] = 0
def _device_removed(self, service, instance):
path = self._get_service_mapping_path(service, instance)
if path in self._dbusservice:
del self._dbusservice[path]
self._handleservicechange()
if service in self._supervised:
del self._supervised[service]
if service == self._lg_battery:
logging.info('LG battery service disappeared: %s' % service)
self._lg_battery = None
self._lg_voltage_buffer = None
self._dbusservice[
'/Dc/Battery/Alarms/CircuitBreakerTripped'] = None
def _gettext(self, path, value):
if path == '/Dc/Battery/State':
state = {
self.STATE_IDLE: 'Idle',
self.STATE_CHARGING: 'Charging',
self.STATE_DISCHARGING: 'Discharging'
}
return state[value]
item = self._summeditems.get(path)
if item is not None:
return item['gettext'] % value
return str(value)
def _compute_phase_totals(self, path, newvalues):
total_power = None
number_of_phases = None
for phase in range(1, 4):
p = newvalues.get('%s/L%s/Power' % (path, phase))
total_power = _safeadd(total_power, p)
if p is not None:
number_of_phases = phase
newvalues[path + '/Total/Power'] = total_power
newvalues[path + '/NumberOfPhases'] = number_of_phases
def _get_connected_service_list(self, classfilter=None):
services = self._dbusmonitor.get_service_list(classfilter=classfilter)
self._remove_unconnected_services(services)
return services
def _get_first_connected_service(self, classfilter=None):
services = self._get_connected_service_list(classfilter=classfilter)
if len(services) == 0:
return None
return services.items()[0]
def _process_supervised(self):
for service, method in self._supervised.items():
# Do an async call. If the owner of the service does not answer, we do not want to wait for
# the timeout here.
method.call_async(error_handler=lambda x: exit_on_error(
self._supervise_failed, service, x))
return True
def _supervise_failed(self, service, error):
try:
if error.get_dbus_name() != 'org.freedesktop.DBus.Error.NoReply':
logging.info('Ignoring supervise error from %s: %s' %
(service, error))
return
logging.error('%s is not responding to D-Bus requests' % service)
proxy = self._dbusmonitor.dbusConn.get_object(
'org.freedesktop.DBus', '/', introspect=False)
pid = proxy.GetConnectionUnixProcessID(service)
if pid is not None and pid > 1:
logging.error('killing owner of %s (pid=%s)' % (service, pid))
os.kill(pid, signal.SIGKILL)
except (OSError, dbus.exceptions.DBusException):
print_exc()
def _update_relay_state(self):
state = None
try:
self._relay_file_read.seek(0)
state = int(self._relay_file_read.read().strip())
except (IOError, ValueError):
print_exc()
self._dbusservice['/Relay/0/State'] = state
return True
def _on_relay_state_changed(self, path, value):
if self._relay_file_write is None:
return False
try:
v = int(value)
if v < 0 or v > 1:
return False
self._relay_file_write.write(str(v))
self._relay_file_write.flush()
return True
except (IOError, ValueError):
print_exc()
return False
def _check_lg_battery(self, multi_path):
if self._lg_battery is None or multi_path is None:
return
battery_current = self._dbusmonitor.get_value(self._lg_battery,
'/Dc/0/Current')
if battery_current is None or abs(battery_current) > 0.01:
if len(self._lg_voltage_buffer) > 0:
logging.debug('LG voltage buffer reset')
self._lg_voltage_buffer = []
return
vebus_voltage = self._dbusmonitor.get_value(multi_path,
'/Dc/0/Voltage')
if vebus_voltage is None:
return
self._lg_voltage_buffer.append(float(vebus_voltage))
if len(self._lg_voltage_buffer) > 40:
self._lg_voltage_buffer = self._lg_voltage_buffer[-40:]
elif len(self._lg_voltage_buffer) < 20:
return
min_voltage = min(self._lg_voltage_buffer)
max_voltage = max(self._lg_voltage_buffer)
battery_voltage = self._dbusmonitor.get_value(self._lg_battery,
'/Dc/0/Voltage')
logging.debug('LG battery current V=%s I=%s' %
(battery_voltage, battery_current))
if min_voltage < 0.9 * battery_voltage or max_voltage > 1.1 * battery_voltage:
logging.error(
'LG shutdown detected V=%s I=%s %s' %
(battery_voltage, battery_current, self._lg_voltage_buffer))
item = self._dbusmonitor.get_item(multi_path, '/Mode')
if item is None:
logging.error('Cannot switch off vebus device')
else:
self._dbusservice[
'/Dc/Battery/Alarms/CircuitBreakerTripped'] = 2
item.set_value(dbus.Int32(4, variant_level=1))
self._lg_voltage_buffer = []
def __init__(self, retries=300):
self._bus = dbus.SystemBus() if (
platform.machine() == 'armv7l' or 'DBUS_SESSION_BUS_ADDRESS'
not in environ) else dbus.SessionBus()
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.HISTORY_DAYS = 30
# One second per retry
self.RETRIES_ON_ERROR = retries
self._testrun_soc_retries = 0
self._last_counters_check = 0
self._dbusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self._timer_runnning = 0
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = True
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
self._vebusservice = None
self._vebusservice_available = False
self._relay_state_import = None
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'acload': {
'name': 'acload',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'inverterhightemp': {
'name': 'inverterhightemp',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'inverteroverload': {
'name': 'inverteroverload',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'soc': {
'name': 'soc',
'reached': False,
'boolean': False,
'timed': False,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {
'code': None,
'whenToLog': 'configChange',
'accessLevel': None
}
# TODO: possible improvement: don't use the DbusMonitor it all, since we are only monitoring
# a set of static values which will always be available. DbusMonitor watches for services
# that come and go, and takes care of automatic signal subscribtions etc. etc: all not necessary
# in this use case where we have fixed services names (com.victronenergy.settings, and c
# com.victronenergy.system).
self._dbusmonitor = DbusMonitor({
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy,
},
'com.victronenergy.system': { # This is not our setting so do it here. not in supportedSettings
'/Ac/Consumption/Total/Power': dummy,
'/Ac/PvOnOutput/Total/Power': dummy,
'/Ac/PvOnGrid/Total/Power': dummy,
'/Ac/PvOnGenset/Total/Power': dummy,
'/Dc/Pv/Power': dummy,
'/AutoSelectedBatteryMeasurement': dummy,
}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value(
'com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=self._bus,
supportedSettings={
'autostart':
['/Settings/Generator0/AutoStartEnabled', 1, 0, 1],
'accumulateddaily':
['/Settings/Generator0/AccumulatedDaily', '', 0, 0],
'accumulatedtotal':
['/Settings/Generator0/AccumulatedTotal', 0, 0, 0],
'batterymeasurement':
['/Settings/Generator0/BatteryService', "default", 0, 0],
'minimumruntime':
['/Settings/Generator0/MinimumRuntime', 0, 0,
86400], # minutes
# On permanent loss of communication: 0 = Stop, 1 = Start, 2 = keep running
'onlosscommunication':
['/Settings/Generator0/OnLossCommunication', 0, 0, 2],
# Quiet hours
'quiethoursenabled':
['/Settings/Generator0/QuietHours/Enabled', 0, 0, 1],
'quiethoursstarttime':
['/Settings/Generator0/QuietHours/StartTime', 75600, 0, 86400],
'quiethoursendtime':
['/Settings/Generator0/QuietHours/EndTime', 21600, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator0/Soc/Enabled', 0, 0, 1],
'socstart':
['/Settings/Generator0/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator0/Soc/StopValue', 90, 0, 100],
'qh_socstart':
['/Settings/Generator0/Soc/QuietHoursStartValue', 90, 0, 100],
'qh_socstop':
['/Settings/Generator0/Soc/QuietHoursStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled': [
'/Settings/Generator0/BatteryVoltage/Enabled', 0, 0, 1
],
'batteryvoltagestart': [
'/Settings/Generator0/BatteryVoltage/StartValue', 11.5, 0,
150
],
'batteryvoltagestop': [
'/Settings/Generator0/BatteryVoltage/StopValue', 12.4, 0,
150
],
'batteryvoltagestarttimer': [
'/Settings/Generator0/BatteryVoltage/StartTimer', 20, 0,
10000
],
'batteryvoltagestoptimer': [
'/Settings/Generator0/BatteryVoltage/StopTimer', 20, 0,
10000
],
'qh_batteryvoltagestart': [
'/Settings/Generator0/BatteryVoltage/QuietHoursStartValue',
11.9, 0, 100
],
'qh_batteryvoltagestop': [
'/Settings/Generator0/BatteryVoltage/QuietHoursStopValue',
12.4, 0, 100
],
# Current
'batterycurrentenabled': [
'/Settings/Generator0/BatteryCurrent/Enabled', 0, 0, 1
],
'batterycurrentstart': [
'/Settings/Generator0/BatteryCurrent/StartValue', 10.5,
0.5, 1000
],
'batterycurrentstop': [
'/Settings/Generator0/BatteryCurrent/StopValue', 5.5, 0,
1000
],
'batterycurrentstarttimer': [
'/Settings/Generator0/BatteryCurrent/StartTimer', 20, 0,
10000
],
'batterycurrentstoptimer': [
'/Settings/Generator0/BatteryCurrent/StopTimer', 20, 0,
10000
],
'qh_batterycurrentstart': [
'/Settings/Generator0/BatteryCurrent/QuietHoursStartValue',
20.5, 0, 1000
],
'qh_batterycurrentstop': [
'/Settings/Generator0/BatteryCurrent/QuietHoursStopValue',
15.5, 0, 1000
],
# AC load
'acloadenabled': [
'/Settings/Generator0/AcLoad/Enabled', 0, 0, 1
],
'acloadstart': [
'/Settings/Generator0/AcLoad/StartValue', 1600, 5, 100000
],
'acloadstop': [
'/Settings/Generator0/AcLoad/StopValue', 800, 0, 100000
],
'acloadstarttimer': [
'/Settings/Generator0/AcLoad/StartTimer', 20, 0, 10000
],
'acloadstoptimer': [
'/Settings/Generator0/AcLoad/StopTimer', 20, 0, 10000
],
'qh_acloadstart': [
'/Settings/Generator0/AcLoad/QuietHoursStartValue', 1900,
0, 100000
],
'qh_acloadstop': [
'/Settings/Generator0/AcLoad/QuietHoursStopValue', 1200, 0,
100000
],
# VE.Bus high temperature
'inverterhightempenabled': [
'/Settings/Generator0/InverterHighTemp/Enabled', 0, 0, 1
],
'inverterhightempstarttimer': [
'/Settings/Generator0/InverterHighTemp/StartTimer', 20, 0,
10000
],
'inverterhightempstoptimer': [
'/Settings/Generator0/InverterHighTemp/StopTimer', 20, 0,
10000
],
# VE.Bus overload
'inverteroverloadenabled': [
'/Settings/Generator0/InverterOverload/Enabled', 0, 0, 1
],
'inverteroverloadstarttimer': [
'/Settings/Generator0/InverterOverload/StartTimer', 20, 0,
10000
],
'inverteroverloadstoptimer': [
'/Settings/Generator0/InverterOverload/StopTimer', 20, 0,
10000
],
# TestRun
'testrunenabled': [
'/Settings/Generator0/TestRun/Enabled', 0, 0, 1
],
'testrunstartdate': [
'/Settings/Generator0/TestRun/StartDate',
time.time(), 0, 10000000000.1
],
'testrunstarttimer': [
'/Settings/Generator0/TestRun/StartTime', 54000, 0, 86400
],
'testruninterval': [
'/Settings/Generator0/TestRun/Interval', 28, 1, 365
],
'testrunruntime': [
'/Settings/Generator0/TestRun/Duration', 7200, 1, 86400
],
'testrunskipruntime': [
'/Settings/Generator0/TestRun/SkipRuntime', 0, 0, 100000
],
'testruntillbatteryfull': [
'/Settings/Generator0/TestRun/RunTillBatteryFull', 0, 0, 1
]
},
eventCallback=self._handle_changed_setting)
# Whenever services come or go, we need to check if it was a service we use. Note that this
# is a bit double: DbusMonitor does the same thing. But since we don't use DbusMonitor to
# monitor for com.victronenergy.battery, .vebus, .charger or any other possible source of
# battery data, it is necessary to monitor for changes in the available dbus services.
self._bus.add_signal_receiver(self._dbus_name_owner_changed,
signal_name='NameOwnerChanged')
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._update_relay()
self._changed = True
# callback that gets called every time a dbus value has changed
def _dbus_value_changed(dbusServiceName, dbusPath, dict, changes,
deviceInstance):
pass
# Why this dummy? Because DbusMonitor expects these values to be there, even though we don't
# need them. So just add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
dbus_tree = {
'com.victronenergy.system': {
'/Dc/Battery/Soc': dummy,
}
}
dbusmonitor = DbusMonitor(dbus_tree, valueChangedCallback=_dbus_value_changed)
# connect and register to dbus
driver = {
'name': "Enphase Envoy",
'servicename': "enphase_envoy",
'instance': 263,
'id': 126,
'version': 478,
}
def create_dbus_service():
dbusservice = VeDbusService('com.victronenergy.pvinverter.envoy')
dbusservice.add_mandatory_paths(
processname=__file__,
def __init__(self):
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.SERVICE_NOBATTERY = 'nobattery'
self.SERVICE_NOVEBUS = 'novebus'
self.HISTORY_DAYS = 30
self._last_counters_check = 0
self._dbusservice = None
self._batteryservice = None
self._vebusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self.timer_runnning = 0
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'acload': {
'name': 'acload',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'soc': {
'name': 'soc',
'reached': False,
'timed': False,
'valid': True,
'enabled': False
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
self._dbusmonitor = DbusMonitor({
'com.victronenergy.vebus': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/State': dummy,
'/Ac/Out/P': dummy,
'/Dc/I': dummy,
'/Dc/V': dummy,
'/Soc': dummy
},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/V': dummy,
'/Dc/0/I': dummy,
'/Dc/0/P': dummy,
'/Soc': dummy
},
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus(),
supportedSettings={
'autostart': ['/Settings/Generator/AutoStart', 0, 0, 1],
'accumulateddaily': ['/Settings/Generator/AccumulatedDaily', '', 0, 0],
'accumulatedtotal': ['/Settings/Generator/AccumulatedTotal', 0, 0, 0],
'batteryservice': ['/Settings/Generator/BatteryService', self.SERVICE_NOBATTERY, 0, 0],
'vebusservice': ['/Settings/Generator/VebusService', self.SERVICE_NOVEBUS, 0, 0],
# Silent mode
'silentmodeenabled': ['/Settings/Generator/SilentMode/Enabled', 0, 0, 1],
'silentmodestarttimer': ['/Settings/Generator/SilentMode/StartTime', 0, 0, 86400],
'silentmodeendtime': ['/Settings/Generator/SilentMode/EndTime', 0, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator/Soc/Enabled', 0, 0, 1],
'socstart': ['/Settings/Generator/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator/Soc/StopValue', 90, 0, 100],
'em_socstart': ['/Settings/Generator/Soc/EmergencyStartValue', 90, 0, 100],
'em_socstop': ['/Settings/Generator/Soc/EmergencyStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled': ['/Settings/Generator/BatteryVoltage/Enabled', 0, 0, 1],
'batteryvoltagestart': ['/Settings/Generator/BatteryVoltage/StartValue', 11.5, 0, 150],
'batteryvoltagestop': ['/Settings/Generator/BatteryVoltage/StopValue', 12.4, 0, 150],
'batteryvoltagestarttimer': ['/Settings/Generator/BatteryVoltage/StartTimer', 20, 0, 10000],
'batteryvoltagestoptimer': ['/Settings/Generator/BatteryVoltage/StopTimer', 20, 0, 10000],
'em_batteryvoltagestart': ['/Settings/Generator/BatteryVoltage/EmergencyStartValue', 11.9, 0, 100],
'em_batteryvoltagestop': ['/Settings/Generator/BatteryVoltage/EmergencyStopValue', 12.4, 0, 100],
# Current
'batterycurrentenabled': ['/Settings/Generator/BatteryCurrent/Enabled', 0, 0, 1],
'batterycurrentstart': ['/Settings/Generator/BatteryCurrent/StartValue', 10.5, 0.5, 1000],
'batterycurrentstop': ['/Settings/Generator/BatteryCurrent/StopValue', 5.5, 0, 1000],
'batterycurrentstarttimer': ['/Settings/Generator/BatteryCurrent/StartTimer', 20, 0, 10000],
'batterycurrentstoptimer': ['/Settings/Generator/BatteryCurrent/StopTimer', 20, 0, 10000],
'em_batterycurrentstart': ['/Settings/Generator/BatteryCurrent/EmergencyStartValue', 20.5, 0, 1000],
'em_batterycurrentstop': ['/Settings/Generator/BatteryCurrent/EmergencyStopValue', 15.5, 0, 1000],
# AC load
'acloadenabled': ['/Settings/Generator/AcLoad/Enabled', 0, 0, 1],
'acloadstart': ['/Settings/Generator/AcLoad/StartValue', 1600, 5, 100000],
'acloadstop': ['/Settings/Generator/AcLoad/StopValue', 800, 0, 100000],
'acloadstarttimer': ['/Settings/Generator/AcLoad/StartTimer', 20, 0, 10000],
'acloadstoptimer': ['/Settings/Generator/AcLoad/StopTimer', 20, 0, 10000],
'em_acloadstart': ['/Settings/Generator/AcLoad/EmergencyStartValue', 1900, 0, 100000],
'em_acloadstop': ['/Settings/Generator/AcLoad/EmergencyStopValue', 1200, 0, 100000],
# Maintenance
'maintenanceenabled': ['/Settings/Generator/Maintenance/Enabled', 0, 0, 1],
'maintenancestartdate': ['/Settings/Generator/Maintenance/StartDate', time.time(), 0, 10000000000.1],
'maintenancestarttimer': ['/Settings/Generator/Maintenance/StartTime', 54000, 0, 86400],
'maintenanceinterval': ['/Settings/Generator/Maintenance/Interval', 28, 1, 365],
'maintenanceruntime': ['/Settings/Generator/Maintenance/Duration', 7200, 1, 86400],
'maintenanceskipruntime': ['/Settings/Generator/Maintenance/SkipRuntime', 0, 0, 100000]
},
eventCallback=self._handle_changed_setting)
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._changed = True
class DbusGenerator:
def __init__(self):
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.SERVICE_NOBATTERY = 'nobattery'
self.SERVICE_NOVEBUS = 'novebus'
self.HISTORY_DAYS = 30
self._last_counters_check = 0
self._dbusservice = None
self._batteryservice = None
self._vebusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self.timer_runnning = 0
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'acload': {
'name': 'acload',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'soc': {
'name': 'soc',
'reached': False,
'timed': False,
'valid': True,
'enabled': False
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
self._dbusmonitor = DbusMonitor({
'com.victronenergy.vebus': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/State': dummy,
'/Ac/Out/P': dummy,
'/Dc/I': dummy,
'/Dc/V': dummy,
'/Soc': dummy
},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/V': dummy,
'/Dc/0/I': dummy,
'/Dc/0/P': dummy,
'/Soc': dummy
},
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus(),
supportedSettings={
'autostart': ['/Settings/Generator/AutoStart', 0, 0, 1],
'accumulateddaily': ['/Settings/Generator/AccumulatedDaily', '', 0, 0],
'accumulatedtotal': ['/Settings/Generator/AccumulatedTotal', 0, 0, 0],
'batteryservice': ['/Settings/Generator/BatteryService', self.SERVICE_NOBATTERY, 0, 0],
'vebusservice': ['/Settings/Generator/VebusService', self.SERVICE_NOVEBUS, 0, 0],
# Silent mode
'silentmodeenabled': ['/Settings/Generator/SilentMode/Enabled', 0, 0, 1],
'silentmodestarttimer': ['/Settings/Generator/SilentMode/StartTime', 0, 0, 86400],
'silentmodeendtime': ['/Settings/Generator/SilentMode/EndTime', 0, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator/Soc/Enabled', 0, 0, 1],
'socstart': ['/Settings/Generator/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator/Soc/StopValue', 90, 0, 100],
'em_socstart': ['/Settings/Generator/Soc/EmergencyStartValue', 90, 0, 100],
'em_socstop': ['/Settings/Generator/Soc/EmergencyStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled': ['/Settings/Generator/BatteryVoltage/Enabled', 0, 0, 1],
'batteryvoltagestart': ['/Settings/Generator/BatteryVoltage/StartValue', 11.5, 0, 150],
'batteryvoltagestop': ['/Settings/Generator/BatteryVoltage/StopValue', 12.4, 0, 150],
'batteryvoltagestarttimer': ['/Settings/Generator/BatteryVoltage/StartTimer', 20, 0, 10000],
'batteryvoltagestoptimer': ['/Settings/Generator/BatteryVoltage/StopTimer', 20, 0, 10000],
'em_batteryvoltagestart': ['/Settings/Generator/BatteryVoltage/EmergencyStartValue', 11.9, 0, 100],
'em_batteryvoltagestop': ['/Settings/Generator/BatteryVoltage/EmergencyStopValue', 12.4, 0, 100],
# Current
'batterycurrentenabled': ['/Settings/Generator/BatteryCurrent/Enabled', 0, 0, 1],
'batterycurrentstart': ['/Settings/Generator/BatteryCurrent/StartValue', 10.5, 0.5, 1000],
'batterycurrentstop': ['/Settings/Generator/BatteryCurrent/StopValue', 5.5, 0, 1000],
'batterycurrentstarttimer': ['/Settings/Generator/BatteryCurrent/StartTimer', 20, 0, 10000],
'batterycurrentstoptimer': ['/Settings/Generator/BatteryCurrent/StopTimer', 20, 0, 10000],
'em_batterycurrentstart': ['/Settings/Generator/BatteryCurrent/EmergencyStartValue', 20.5, 0, 1000],
'em_batterycurrentstop': ['/Settings/Generator/BatteryCurrent/EmergencyStopValue', 15.5, 0, 1000],
# AC load
'acloadenabled': ['/Settings/Generator/AcLoad/Enabled', 0, 0, 1],
'acloadstart': ['/Settings/Generator/AcLoad/StartValue', 1600, 5, 100000],
'acloadstop': ['/Settings/Generator/AcLoad/StopValue', 800, 0, 100000],
'acloadstarttimer': ['/Settings/Generator/AcLoad/StartTimer', 20, 0, 10000],
'acloadstoptimer': ['/Settings/Generator/AcLoad/StopTimer', 20, 0, 10000],
'em_acloadstart': ['/Settings/Generator/AcLoad/EmergencyStartValue', 1900, 0, 100000],
'em_acloadstop': ['/Settings/Generator/AcLoad/EmergencyStopValue', 1200, 0, 100000],
# Maintenance
'maintenanceenabled': ['/Settings/Generator/Maintenance/Enabled', 0, 0, 1],
'maintenancestartdate': ['/Settings/Generator/Maintenance/StartDate', time.time(), 0, 10000000000.1],
'maintenancestarttimer': ['/Settings/Generator/Maintenance/StartTime', 54000, 0, 86400],
'maintenanceinterval': ['/Settings/Generator/Maintenance/Interval', 28, 1, 365],
'maintenanceruntime': ['/Settings/Generator/Maintenance/Duration', 7200, 1, 86400],
'maintenanceskipruntime': ['/Settings/Generator/Maintenance/SkipRuntime', 0, 0, 100000]
},
eventCallback=self._handle_changed_setting)
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._changed = True
def _evaluate_if_we_are_needed(self):
if self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Function') == 1:
if self._dbusservice is None:
logger.info('Action! Going on dbus and taking control of the relay.')
# put ourselves on the dbus
self._dbusservice = VeDbusService('com.victronenergy.generator.startstop0')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareversion,
connection='generator',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# State: None = invalid, 0 = stopped, 1 = running
self._dbusservice.add_path('/State', value=0)
# Condition that made the generator start
self._dbusservice.add_path('/RunningByCondition', value='')
# Runtime
self._dbusservice.add_path('/Runtime', value=0, gettextcallback=self._gettext)
# Today runtime
self._dbusservice.add_path('/TodayRuntime', value=0, gettextcallback=self._gettext)
# Maintenance runtime
self._dbusservice.add_path('/MaintenanceIntervalRuntime',
value=self._interval_runtime(self._settings['maintenanceinterval']),
gettextcallback=self._gettext)
# Next maintenance date, values is 0 for maintenande disabled
self._dbusservice.add_path('/NextMaintenance', value=None, gettextcallback=self._gettext)
# Next maintenance is needed 1, not needed 0
self._dbusservice.add_path('/SkipMaintenance', value=None)
# Manual start
self._dbusservice.add_path('/ManualStart', value=0, writeable=True)
# Manual start timer
self._dbusservice.add_path('/ManualStartTimer', value=0, writeable=True)
# Silent mode active
self._dbusservice.add_path('/SilentMode', value=0)
# Battery services
self._dbusservice.add_path('/AvailableBatteryServices', value=None)
# Vebus services
self._dbusservice.add_path('/AvailableVebusServices', value=None)
# As the user can select the vebus service and is not yet possible to get the servie name from the gui
# we need to provide it
self._dbusservice.add_path('/VebusServiceName', value=None)
self._determineservices()
self._batteryservice = None
self._vebusservice = None
self._populate_services_list()
self._determineservices()
if self._batteryservice is not None:
logger.info('Battery service we need (%s) found! Using it for generator start/stop'
% self._get_service_path(self._settings['batteryservice']))
elif self._vebusservice is not None:
logger.info('VE.Bus service we need (%s) found! Using it for generator start/stop'
% self._get_service_path(self._settings['vebusservice']))
else:
self._populate_services_list()
self._determineservices()
else:
if self._dbusservice is not None:
self._stop_generator()
self._batteryservice = None
self._vebusservice = None
self._dbusservice.__del__()
self._dbusservice = None
# Reset conditions
for condition in self._condition_stack:
self._reset_condition(self._condition_stack[condition])
logger.info('Relay function is no longer set to generator start/stop: made sure generator is off ' +
'and now going off dbus')
def _device_added(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
def _device_removed(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
def _dbus_value_changed(self, dbusServiceName, dbusPath, options, changes, deviceInstance):
self._evaluate_if_we_are_needed()
self._changed = True
# Update relay state when polarity is changed
if dbusPath == '/Settings/Relay/Polarity':
self._update_relay()
def _handle_changed_setting(self, setting, oldvalue, newvalue):
self._changed = True
self._evaluate_if_we_are_needed()
if setting == 'Polarity':
self._update_relay()
if self._dbusservice is not None and setting == 'maintenanceinterval':
self._dbusservice['/MaintenanceIntervalRuntime'] = self._interval_runtime(
self._settings['maintenanceinterval'])
def _gettext(self, path, value):
if path == '/NextMaintenance':
# Locale format date
d = datetime.datetime.fromtimestamp(value)
return d.strftime('%c')
elif path in ['/Runtime', '/MaintenanceIntervalRuntime', '/TodayRuntime']:
m, s = divmod(value, 60)
h, m = divmod(m, 60)
return '%dh, %dm, %ds' % (h, m, s)
else:
return value
def _handletimertick(self):
# try catch, to make sure that we kill ourselves on an error. Without this try-catch, there would
# be an error written to stdout, and then the timer would not be restarted, resulting in a dead-
# lock waiting for manual intervention -> not good!
# To keep accuracy, conditions will forced to be evaluated each second when the generator or a timer is running
try:
if self._dbusservice is not None and (self._changed or self._dbusservice['/State'] == 1
or self._dbusservice['/ManualStart'] == 1 or self.timer_runnning):
self._evaluate_startstop_conditions()
self._changed = False
except:
self._stop_generator()
import traceback
traceback.print_exc()
sys.exit(1)
return True
def _evaluate_startstop_conditions(self):
# Conditions will be evaluated in this order
conditions = ['soc', 'acload', 'batterycurrent', 'batteryvoltage']
start = False
runningbycondition = None
today = calendar.timegm(datetime.date.today().timetuple())
self.timer_runnning = False
values = self._get_updated_values()
self._check_silent_mode()
# New day, register it
if self._last_counters_check < today and self._dbusservice['/State'] == 0:
self._last_counters_check = today
self._update_accumulated_time()
# Update current and accumulated runtime.
if self._dbusservice['/State'] == 1:
self._dbusservice['/Runtime'] = int(time.time() - self._starttime)
# By performance reasons, accumulated runtime is onle updated
# once per 10s. When the generator stops is also updated.
if self._dbusservice['/Runtime'] - self._last_runtime_update >= 10:
self._update_accumulated_time()
if self._evaluate_manual_start():
runningbycondition = 'manual'
start = True
# Evaluate value conditions
for condition in conditions:
start = self._evaluate_condition(self._condition_stack[condition], values[condition]) or start
runningbycondition = condition if start and runningbycondition is None else runningbycondition
if self._evaluate_maintenance_condition() and not start:
runningbycondition = 'maintenance'
start = True
if start:
self._start_generator(runningbycondition)
else:
self._stop_generator()
def _reset_condition(self, condition):
condition['reached'] = False
if condition['timed']:
condition['start_timer'] = 0
condition['stop_timer'] = 0
def _check_condition(self, condition, value):
name = condition['name']
if self._settings[name + 'enabled'] == 0:
if condition['enabled']:
condition['enabled'] = False
logger.info('Disabling (%s) condition' % name)
self._reset_condition(condition)
return False
elif not condition['enabled']:
condition['enabled'] = True
logger.info('Enabling (%s) condition' % name)
if value is None and condition['valid']:
logger.info('Error getting (%s) value, skipping evaluation till get a valid value' % name)
self._reset_condition(condition)
condition['valid'] = False
return False
elif value is not None and not condition['valid']:
logger.info('Success getting (%s) value, resuming evaluation' % name)
condition['valid'] = True
return condition['valid']
def _evaluate_condition(self, condition, value):
name = condition['name']
setting = ('em_' if self._dbusservice['/SilentMode'] == 1 else '') + name
startvalue = self._settings[setting + 'start']
stopvalue = self._settings[setting + 'stop']
# Check if the have to be evaluated
if not self._check_condition(condition, value):
return False
# As this is a generic evaluation method, we need to know how to compare the values
# first check if start value should be greater than stop value and then compare
start_is_greater = startvalue > stopvalue
# When the condition is already reached only the stop value can set it to False
start = condition['reached'] or (value >= startvalue if start_is_greater else value <= startvalue)
stop = value <= stopvalue if start_is_greater else value >= stopvalue
# Timed conditions must start/stop after the condition has been reached for a minimum
# time.
if condition['timed']:
if not condition['reached'] and start:
condition['start_timer'] += time.time() if condition['start_timer'] == 0 else 0
start = time.time() - condition['start_timer'] >= self._settings[name + 'starttimer']
condition['stop_timer'] *= int(not start)
self.timer_runnning = True
else:
condition['start_timer'] = 0
if condition['reached'] and stop:
condition['stop_timer'] += time.time() if condition['stop_timer'] == 0 else 0
stop = time.time() - condition['stop_timer'] >= self._settings[name + 'stoptimer']
condition['stop_timer'] *= int(not stop)
self.timer_runnning = True
else:
condition['stop_timer'] = 0
condition['reached'] = start and not stop
return condition['reached']
def _evaluate_manual_start(self):
if self._dbusservice['/ManualStart'] == 0:
return False
start = True
# If /ManualStartTimer has a value greater than zero will use it to set a stop timer.
# If no timer is set, the generator will not stop until the user stops it manually.
# Once started by manual start, each evaluation the timer is decreased
if self._dbusservice['/ManualStartTimer'] != 0:
self._manualstarttimer += time.time() if self._manualstarttimer == 0 else 0
self._dbusservice['/ManualStartTimer'] -= int(time.time()) - int(self._manualstarttimer)
self._manualstarttimer = time.time()
start = self._dbusservice['/ManualStartTimer'] > 0
self._dbusservice['/ManualStart'] = int(start)
# Reset if timer is finished
self._manualstarttimer *= int(start)
self._dbusservice['/ManualStartTimer'] *= int(start)
return start
def _evaluate_maintenance_condition(self):
if self._settings['maintenanceenabled'] == 0:
self._dbusservice['/SkipMaintenance'] = None
self._dbusservice['/NextMaintenance'] = None
return False
today = datetime.date.today()
try:
startdate = datetime.date.fromtimestamp(self._settings['maintenancestartdate'])
starttime = time.mktime(today.timetuple()) + self._settings['maintenancestarttimer']
except ValueError:
logger.debug('Invalid dates, skipping maintenance')
return False
# If start date is in the future set as NextMaintenance and stop evaluating
if startdate > today:
self._dbusservice['/NextMaintenance'] = time.mktime(startdate.timetuple())
return False
start = False
# If the accumulated runtime during the maintenance interval is greater than '/MaintenanceIntervalRuntime'
# the maintenance must be skipped
needed = (self._settings['maintenanceskipruntime'] > self._dbusservice['/MaintenanceIntervalRuntime']
or self._settings['maintenanceskipruntime'] == 0)
self._dbusservice['/SkipMaintenance'] = int(not needed)
interval = self._settings['maintenanceinterval']
stoptime = starttime + self._settings['maintenanceruntime']
elapseddays = (today - startdate).days
mod = elapseddays % interval
start = (not bool(mod) and (time.time() >= starttime) and (time.time() <= stoptime))
if not bool(mod) and (time.time() <= stoptime):
self._dbusservice['/NextMaintenance'] = starttime
else:
self._dbusservice['/NextMaintenance'] = (time.mktime((today +
datetime.timedelta(days=interval - mod)).timetuple()) +
self._settings['maintenancestarttimer'])
return start and needed
def _check_silent_mode(self):
active = False
if self._settings['silentmodeenabled'] == 1:
# Seconds after today 00:00
timeinseconds = time.time() - time.mktime(datetime.date.today().timetuple())
silentmodestart = self._settings['silentmodestarttimer']
silentmodeend = self._settings['silentmodeendtime']
# Check if the current time is between the start time and end time
if silentmodestart < silentmodeend:
active = silentmodestart <= timeinseconds and timeinseconds < silentmodeend
else: # End time is lower than start time, example Start: 21:00, end: 08:00
active = not (silentmodeend < timeinseconds and timeinseconds < silentmodestart)
if self._dbusservice['/SilentMode'] == 0 and active:
logger.info('Entering silent mode, only emergency values will be evaluated')
elif self._dbusservice['/SilentMode'] == 1 and not active:
logger.info('Leaving silent mode')
self._dbusservice['/SilentMode'] = int(active)
return active
def _update_accumulated_time(self):
seconds = self._dbusservice['/Runtime']
accumulated = seconds - self._last_runtime_update
self._settings['accumulatedtotal'] = int(self._settings['accumulatedtotal']) + accumulated
# Using calendar to get timestamp in UTC, not local time
today_date = str(calendar.timegm(datetime.date.today().timetuple()))
# If something goes wrong getting the json string create a new one
try:
accumulated_days = json.loads(self._settings['accumulateddaily'])
except ValueError:
accumulated_days = {today_date: 0}
if (today_date in accumulated_days):
accumulated_days[today_date] += accumulated
else:
accumulated_days[today_date] = accumulated
self._last_runtime_update = seconds
# Keep the historical with a maximum of HISTORY_DAYS
while len(accumulated_days) > self.HISTORY_DAYS:
accumulated_days.pop(min(accumulated_days.keys()), None)
# Upadate settings
self._settings['accumulateddaily'] = json.dumps(accumulated_days, sort_keys=True)
self._dbusservice['/TodayRuntime'] = self._interval_runtime(0)
self._dbusservice['/MaintenanceIntervalRuntime'] = self._interval_runtime(self._settings['maintenanceinterval'])
def _interval_runtime(self, days):
summ = 0
try:
daily_record = json.loads(self._settings['accumulateddaily'])
except ValueError:
return 0
for i in range(days + 1):
previous_day = calendar.timegm((datetime.date.today() - datetime.timedelta(days=i)).timetuple())
if str(previous_day) in daily_record.keys():
summ += daily_record[str(previous_day)] if str(previous_day) in daily_record.keys() else 0
return summ
def _get_updated_values(self):
values = {
'batteryvoltage': None,
'batterycurrent': None,
'soc': None,
'acload': None
}
# Update values from battery monitor
if self._batteryservice is not None:
batteryservicetype = self._batteryservice.split('.')[2]
values['soc'] = self._dbusmonitor.get_value(self._batteryservice, '/Soc')
if batteryservicetype == 'battery':
values['batteryvoltage'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/V')
values['batterycurrent'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/I') * -1
elif batteryservicetype == 'vebus':
values['batteryvoltage'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/V')
values['batterycurrent'] = self._dbusmonitor.get_value(self._batteryservice, '/Dc/I') * -1
if self._vebusservice is not None:
values['acload'] = self._dbusmonitor.get_value(self._vebusservice, '/Ac/Out/P')
return values
def _populate_services_list(self):
vebusservices = self._dbusmonitor.get_service_list('com.victronenergy.vebus')
batteryservices = self._dbusmonitor.get_service_list('com.victronenergy.battery')
self._remove_unconnected_services(vebusservices)
# User can set a vebus as battery monitor, add the option
batteryservices.update(vebusservices)
vebus = {self.SERVICE_NOVEBUS: 'None'}
battery = {self.SERVICE_NOBATTERY: 'None'}
for servicename, instance in vebusservices.items():
key = '%s/%s' % ('.'.join(servicename.split('.')[0:3]), instance)
vebus[key] = self._get_readable_service_name(servicename)
for servicename, instance in batteryservices.items():
key = '%s/%s' % ('.'.join(servicename.split('.')[0:3]), instance)
battery[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableBatteryServices'] = json.dumps(battery)
self._dbusservice['/AvailableVebusServices'] = json.dumps(vebus)
def _determineservices(self):
vebusservice = self._settings['vebusservice']
batteryservice = self._settings['batteryservice']
if batteryservice != self.SERVICE_NOBATTERY and batteryservice != '':
self._batteryservice = self._get_service_path(batteryservice)
else:
self._batteryservice = None
if vebusservice != self.SERVICE_NOVEBUS and vebusservice != '':
self._vebusservice = self._get_service_path(vebusservice)
self._dbusservice['/VebusServiceName'] = self._vebusservice
else:
self._vebusservice = None
self._changed = True
def _get_readable_service_name(self, servicename):
return (self._dbusmonitor.get_value(servicename, '/ProductName') + ' on ' +
self._dbusmonitor.get_value(servicename, '/Mgmt/Connection'))
def _remove_unconnected_services(self, services):
# Workaround: because com.victronenergy.vebus is available even when there is no vebus product
# connected. Remove any that is not connected. For this, we use /State since mandatory path
# /Connected is not implemented in mk2dbus.
for servicename in services.keys():
if ((servicename.split('.')[2] == 'vebus' and self._dbusmonitor.get_value(servicename, '/State') is None)
or self._dbusmonitor.get_value(servicename, '/Connected') != 1
or self._dbusmonitor.get_value(servicename, '/ProductName') is None
or self._dbusmonitor.get_value(servicename, '/Mgmt/Connection') is None):
del services[servicename]
def _get_service_path(self, service):
s = service.split('/')
assert len(s) == 2, 'The setting (%s) is invalid!' % service
serviceclass = s[0]
instance = int(s[1])
services = self._dbusmonitor.get_service_list(classfilter=serviceclass)
if instance not in services.values():
# Once chosen battery monitor does not exist. Don't auto change the setting (it might come
# back). And also don't autoselect another.
servicepath = None
else:
# According to https://www.python.org/dev/peps/pep-3106/, dict.keys() and dict.values()
# always have the same order.
servicepath = services.keys()[services.values().index(instance)]
return servicepath
def _start_generator(self, condition):
# This function will start the generator in the case generator not
# already running. When differs, the RunningByCondition is updated
if self._dbusservice['/State'] == 0:
self._dbusservice['/State'] = 1
self._update_relay()
self._starttime = time.time()
logger.info('Starting generator by %s condition' % condition)
elif self._dbusservice['/RunningByCondition'] != condition:
logger.info('Generator previously running by %s condition is now running by %s condition'
% (self._dbusservice['/RunningByCondition'], condition))
self._dbusservice['/RunningByCondition'] = condition
def _stop_generator(self):
if self._dbusservice['/State'] == 1:
self._dbusservice['/State'] = 0
self._update_relay()
logger.info('Stopping generator that was running by %s condition' %
str(self._dbusservice['/RunningByCondition']))
self._dbusservice['/RunningByCondition'] = ''
self._update_accumulated_time()
self._starttime = 0
self._dbusservice['/Runtime'] = 0
self._dbusservice['/ManualStartTimer'] = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
def _update_relay(self):
# Relay polarity 0 = NO, 1 = NC
polarity = bool(self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Polarity'))
w = int(not polarity) if bool(self._dbusservice['/State']) else int(polarity)
try:
f = open(self.RELAY_GPIO_FILE, 'w')
f.write(str(w))
f.close()
except IOError:
logger.info('Error writting to the relay GPIO file!: %s' % self.RELAY_GPIO_FILE)
class DbusMqtt:
def __init__(self,mqqthost,nodeid,service,base_topic='emonhub'):
self.d = DbusMonitor(datalist.vrmtree, self._value_changed_on_dbus)
"""
self.ttl = 300 # seconds to keep sending the updates. If no keepAlive received in this
# time - stop sending
self.lastKeepAliveRcd = int(time.time()) - self.ttl # initialised to when this code launches
"""
self.ttm = 0 # seconds to gather data before sending, 0 - send immediate, NN - gather
# for NN seconds
self._last_publish = int(time.time() - 60) # Just an initialisation value, so the first
# ttm timeout is _now_
self._gathered_data_timer = None
self._gathered_data = {}
self._mqtt = mqtt.Client(client_id=get_vrm_portal_id(), clean_session=True, userdata=None)
self._mqtt.loop_start() # creates new thread and runs Mqtt.loop_forever() in it.
self._mqtt.on_connect = self._on_connect
self._mqtt.on_message = self._on_message
self._mqtt.connect_async(mqqthost, port=1883, keepalive=60, bind_address="")
self._service_name = service
self._nodeid = nodeid #node ide expected by emonhub . need to modigy emonhub.conf accordingly
self._topic = base_topic
message = '{basetopic}/tx/{nodeid}/values'
self._publishPath = message.format(basetopic=self._topic,nodeid=self._nodeid)
def get_service_values(self):
"""
Hackish way to send BMV data on dbus to MQTT for EMON
"""
current_vals = self.d.get_values_for_service(['onIntervalAlways'],self._service_name)
payload = []
#Create String that Emon will like
for val in current_vals:
payload.append(str(current_vals[val]))
#Emon Expects , between data point objects
payload_str = ", ".join(payload)
logger.debug('Sending payload data %s ' % (payload_str))
#publish away
self._publish(payload_str,self._topic)
# servicename: for example com.victronenergy.dbus.ttyO1
# path: for example /Ac/ActiveIn/L1/V
# props: the dictionary containing the properties from the vrmTree
# changes: the changes, a tuple with GetText() and GetValue()
# instance: the deviceInstance
def _value_changed_on_dbus(self, servicename, path, props, changes, instance):
# if not self.someone_watching():
# return
self._gathered_data[props["code"] + str(instance)] = {
'code': props["code"], 'instance': instance, 'value': str(changes['Value'])}
if self.ttm: # != 0, ie. gather before sending
logger.debug('Got data from DBUS checking ttm')
if self._marshall_says_go():
self._publish(str(self._gathered_data),self._topic)
elif self._gathered_data_timer is None:
# Set timer, to make sure that this data will not reside in this queue for longer
# than ttm-time
self._gathered_data_timer = gobject.timeout_add(
self.ttm * 1000,
exit_on_error, self._publish)
else: # send immediate
logger.debug('collected data : %s'%self._gathered_data)
logger.debug('sending data')
self._publish(str(self._gathered_data),self._topic)
def _on_message(self, client, userdata, msg):
logger.debug('message! userdata: %s, message %s' % (userdata, msg.topic+" "+str(msg.payload)))
def _on_connect(self, client, userdata, flags, rc):
"""
RC definition:
0: Connection successful
1: Connection refused - incorrect protocol version
2: Connection refused - invalid client identifier
3: Connection refused - server unavailable
4: Connection refused - bad username or password
5: Connection refused - not authorised
6-255: Currently unused.
"""
logger.debug('connected! client=%s, userdata=%s, flags=%s, rc=%s' % (client, userdata, flags, rc))
# Subscribing in on_connect() means that if we lose the connection and
# reconnect then subscriptions will be renewed.
# client.subscribe("$SYS/#")
def _someone_watching(self):
return True # (self.lastKeepAliveRcd + self.ttl) > int(time.time())
def _marshall_says_go(self):
return (self._last_publish + self.ttm) < int(time.time())
def _publish(self,payload,topic):
self._last_publish = int(time.time())
"""
message = {'dataUpdate': self.gatheredData.values()}
self.gatheredData = {}
if self.gatheredDataTimer is not None:
gobject.source_remove(self.gatheredDataTimer)
self.gatheredDataTimer = None
logger.debug("Sending dataUpdate, fired by timer is %s" % firedbytimer)
send_to_pubnub('livefeed', message)
return False # let gobject know that it is not necessary to fire us again.
"""
topic = self._publishPath
logger.debug('publishing on topic "%s", data "%s"' % (topic, payload))
self._mqtt.publish(topic, payload=payload, qos=0, retain=False)
def __init__(self):
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.SERVICE_NOBATTERY = 'nobattery'
self.SERVICE_NOVEBUS = 'novebus'
self.HISTORY_DAYS = 30
self._last_counters_check = 0
self._dbusservice = None
self._batteryservice = None
self._vebusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self.timer_runnning = 0
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'acload': {
'name': 'acload',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'soc': {
'name': 'soc',
'reached': False,
'timed': False,
'valid': True,
'enabled': False
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {
'code': None,
'whenToLog': 'configChange',
'accessLevel': None
}
self._dbusmonitor = DbusMonitor(
{
'com.victronenergy.vebus': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/State': dummy,
'/Ac/Out/P': dummy,
'/Dc/I': dummy,
'/Dc/V': dummy,
'/Soc': dummy
},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/V': dummy,
'/Dc/0/I': dummy,
'/Dc/0/P': dummy,
'/Soc': dummy
},
'com.victronenergy.settings':
{ # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy
}
},
self._dbus_value_changed,
self._device_added,
self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value(
'com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=dbus.SystemBus() if
(platform.machine() == 'armv7l') else dbus.SessionBus(),
supportedSettings={
'autostart': ['/Settings/Generator/AutoStart', 0, 0, 1],
'accumulateddaily':
['/Settings/Generator/AccumulatedDaily', '', 0, 0],
'accumulatedtotal':
['/Settings/Generator/AccumulatedTotal', 0, 0, 0],
'batteryservice': [
'/Settings/Generator/BatteryService',
self.SERVICE_NOBATTERY, 0, 0
],
'vebusservice': [
'/Settings/Generator/VebusService', self.SERVICE_NOVEBUS,
0, 0
],
# Silent mode
'silentmodeenabled':
['/Settings/Generator/SilentMode/Enabled', 0, 0, 1],
'silentmodestarttimer':
['/Settings/Generator/SilentMode/StartTime', 0, 0, 86400],
'silentmodeendtime':
['/Settings/Generator/SilentMode/EndTime', 0, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator/Soc/Enabled', 0, 0, 1],
'socstart': ['/Settings/Generator/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator/Soc/StopValue', 90, 0, 100],
'em_socstart':
['/Settings/Generator/Soc/EmergencyStartValue', 90, 0, 100],
'em_socstop':
['/Settings/Generator/Soc/EmergencyStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled':
['/Settings/Generator/BatteryVoltage/Enabled', 0, 0, 1],
'batteryvoltagestart': [
'/Settings/Generator/BatteryVoltage/StartValue', 11.5, 0,
150
],
'batteryvoltagestop':
['/Settings/Generator/BatteryVoltage/StopValue', 12.4, 0, 150],
'batteryvoltagestarttimer': [
'/Settings/Generator/BatteryVoltage/StartTimer', 20, 0,
10000
],
'batteryvoltagestoptimer':
['/Settings/Generator/BatteryVoltage/StopTimer', 20, 0, 10000],
'em_batteryvoltagestart': [
'/Settings/Generator/BatteryVoltage/EmergencyStartValue',
11.9, 0, 100
],
'em_batteryvoltagestop': [
'/Settings/Generator/BatteryVoltage/EmergencyStopValue',
12.4, 0, 100
],
# Current
'batterycurrentenabled':
['/Settings/Generator/BatteryCurrent/Enabled', 0, 0, 1],
'batterycurrentstart': [
'/Settings/Generator/BatteryCurrent/StartValue', 10.5, 0.5,
1000
],
'batterycurrentstop':
['/Settings/Generator/BatteryCurrent/StopValue', 5.5, 0, 1000],
'batterycurrentstarttimer': [
'/Settings/Generator/BatteryCurrent/StartTimer', 20, 0,
10000
],
'batterycurrentstoptimer':
['/Settings/Generator/BatteryCurrent/StopTimer', 20, 0, 10000],
'em_batterycurrentstart': [
'/Settings/Generator/BatteryCurrent/EmergencyStartValue',
20.5, 0, 1000
],
'em_batterycurrentstop': [
'/Settings/Generator/BatteryCurrent/EmergencyStopValue',
15.5, 0, 1000
],
# AC load
'acloadenabled': [
'/Settings/Generator/AcLoad/Enabled', 0, 0, 1
],
'acloadstart': [
'/Settings/Generator/AcLoad/StartValue', 1600, 5, 100000
],
'acloadstop': [
'/Settings/Generator/AcLoad/StopValue', 800, 0, 100000
],
'acloadstarttimer': [
'/Settings/Generator/AcLoad/StartTimer', 20, 0, 10000
],
'acloadstoptimer': [
'/Settings/Generator/AcLoad/StopTimer', 20, 0, 10000
],
'em_acloadstart': [
'/Settings/Generator/AcLoad/EmergencyStartValue', 1900, 0,
100000
],
'em_acloadstop': [
'/Settings/Generator/AcLoad/EmergencyStopValue', 1200, 0,
100000
],
# Maintenance
'maintenanceenabled': [
'/Settings/Generator/Maintenance/Enabled', 0, 0, 1
],
'maintenancestartdate': [
'/Settings/Generator/Maintenance/StartDate',
time.time(), 0, 10000000000.1
],
'maintenancestarttimer':
['/Settings/Generator/Maintenance/StartTime', 54000, 0, 86400],
'maintenanceinterval': [
'/Settings/Generator/Maintenance/Interval', 28, 1, 365
],
'maintenanceruntime': [
'/Settings/Generator/Maintenance/Duration', 7200, 1, 86400
],
'maintenanceskipruntime': [
'/Settings/Generator/Maintenance/SkipRuntime', 0, 0, 100000
]
},
eventCallback=self._handle_changed_setting)
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._changed = True
class DbusGenerator:
def __init__(self):
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.SERVICE_NOBATTERY = 'nobattery'
self.SERVICE_NOVEBUS = 'novebus'
self.HISTORY_DAYS = 30
self._last_counters_check = 0
self._dbusservice = None
self._batteryservice = None
self._vebusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self.timer_runnning = 0
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'acload': {
'name': 'acload',
'reached': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False
},
'soc': {
'name': 'soc',
'reached': False,
'timed': False,
'valid': True,
'enabled': False
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {
'code': None,
'whenToLog': 'configChange',
'accessLevel': None
}
self._dbusmonitor = DbusMonitor(
{
'com.victronenergy.vebus': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/State': dummy,
'/Ac/Out/P': dummy,
'/Dc/I': dummy,
'/Dc/V': dummy,
'/Soc': dummy
},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/V': dummy,
'/Dc/0/I': dummy,
'/Dc/0/P': dummy,
'/Soc': dummy
},
'com.victronenergy.settings':
{ # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy
}
},
self._dbus_value_changed,
self._device_added,
self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value(
'com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=dbus.SystemBus() if
(platform.machine() == 'armv7l') else dbus.SessionBus(),
supportedSettings={
'autostart': ['/Settings/Generator/AutoStart', 0, 0, 1],
'accumulateddaily':
['/Settings/Generator/AccumulatedDaily', '', 0, 0],
'accumulatedtotal':
['/Settings/Generator/AccumulatedTotal', 0, 0, 0],
'batteryservice': [
'/Settings/Generator/BatteryService',
self.SERVICE_NOBATTERY, 0, 0
],
'vebusservice': [
'/Settings/Generator/VebusService', self.SERVICE_NOVEBUS,
0, 0
],
# Silent mode
'silentmodeenabled':
['/Settings/Generator/SilentMode/Enabled', 0, 0, 1],
'silentmodestarttimer':
['/Settings/Generator/SilentMode/StartTime', 0, 0, 86400],
'silentmodeendtime':
['/Settings/Generator/SilentMode/EndTime', 0, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator/Soc/Enabled', 0, 0, 1],
'socstart': ['/Settings/Generator/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator/Soc/StopValue', 90, 0, 100],
'em_socstart':
['/Settings/Generator/Soc/EmergencyStartValue', 90, 0, 100],
'em_socstop':
['/Settings/Generator/Soc/EmergencyStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled':
['/Settings/Generator/BatteryVoltage/Enabled', 0, 0, 1],
'batteryvoltagestart': [
'/Settings/Generator/BatteryVoltage/StartValue', 11.5, 0,
150
],
'batteryvoltagestop':
['/Settings/Generator/BatteryVoltage/StopValue', 12.4, 0, 150],
'batteryvoltagestarttimer': [
'/Settings/Generator/BatteryVoltage/StartTimer', 20, 0,
10000
],
'batteryvoltagestoptimer':
['/Settings/Generator/BatteryVoltage/StopTimer', 20, 0, 10000],
'em_batteryvoltagestart': [
'/Settings/Generator/BatteryVoltage/EmergencyStartValue',
11.9, 0, 100
],
'em_batteryvoltagestop': [
'/Settings/Generator/BatteryVoltage/EmergencyStopValue',
12.4, 0, 100
],
# Current
'batterycurrentenabled':
['/Settings/Generator/BatteryCurrent/Enabled', 0, 0, 1],
'batterycurrentstart': [
'/Settings/Generator/BatteryCurrent/StartValue', 10.5, 0.5,
1000
],
'batterycurrentstop':
['/Settings/Generator/BatteryCurrent/StopValue', 5.5, 0, 1000],
'batterycurrentstarttimer': [
'/Settings/Generator/BatteryCurrent/StartTimer', 20, 0,
10000
],
'batterycurrentstoptimer':
['/Settings/Generator/BatteryCurrent/StopTimer', 20, 0, 10000],
'em_batterycurrentstart': [
'/Settings/Generator/BatteryCurrent/EmergencyStartValue',
20.5, 0, 1000
],
'em_batterycurrentstop': [
'/Settings/Generator/BatteryCurrent/EmergencyStopValue',
15.5, 0, 1000
],
# AC load
'acloadenabled': [
'/Settings/Generator/AcLoad/Enabled', 0, 0, 1
],
'acloadstart': [
'/Settings/Generator/AcLoad/StartValue', 1600, 5, 100000
],
'acloadstop': [
'/Settings/Generator/AcLoad/StopValue', 800, 0, 100000
],
'acloadstarttimer': [
'/Settings/Generator/AcLoad/StartTimer', 20, 0, 10000
],
'acloadstoptimer': [
'/Settings/Generator/AcLoad/StopTimer', 20, 0, 10000
],
'em_acloadstart': [
'/Settings/Generator/AcLoad/EmergencyStartValue', 1900, 0,
100000
],
'em_acloadstop': [
'/Settings/Generator/AcLoad/EmergencyStopValue', 1200, 0,
100000
],
# Maintenance
'maintenanceenabled': [
'/Settings/Generator/Maintenance/Enabled', 0, 0, 1
],
'maintenancestartdate': [
'/Settings/Generator/Maintenance/StartDate',
time.time(), 0, 10000000000.1
],
'maintenancestarttimer':
['/Settings/Generator/Maintenance/StartTime', 54000, 0, 86400],
'maintenanceinterval': [
'/Settings/Generator/Maintenance/Interval', 28, 1, 365
],
'maintenanceruntime': [
'/Settings/Generator/Maintenance/Duration', 7200, 1, 86400
],
'maintenanceskipruntime': [
'/Settings/Generator/Maintenance/SkipRuntime', 0, 0, 100000
]
},
eventCallback=self._handle_changed_setting)
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._changed = True
def _evaluate_if_we_are_needed(self):
if self._dbusmonitor.get_value('com.victronenergy.settings',
'/Settings/Relay/Function') == 1:
if self._dbusservice is None:
logger.info(
'Action! Going on dbus and taking control of the relay.')
# put ourselves on the dbus
self._dbusservice = VeDbusService(
'com.victronenergy.generator.startstop0')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareversion,
connection='generator',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# State: None = invalid, 0 = stopped, 1 = running
self._dbusservice.add_path('/State', value=0)
# Condition that made the generator start
self._dbusservice.add_path('/RunningByCondition', value='')
# Runtime
self._dbusservice.add_path('/Runtime',
value=0,
gettextcallback=self._gettext)
# Today runtime
self._dbusservice.add_path('/TodayRuntime',
value=0,
gettextcallback=self._gettext)
# Maintenance runtime
self._dbusservice.add_path(
'/MaintenanceIntervalRuntime',
value=self._interval_runtime(
self._settings['maintenanceinterval']),
gettextcallback=self._gettext)
# Next maintenance date, values is 0 for maintenande disabled
self._dbusservice.add_path('/NextMaintenance',
value=None,
gettextcallback=self._gettext)
# Next maintenance is needed 1, not needed 0
self._dbusservice.add_path('/SkipMaintenance', value=None)
# Manual start
self._dbusservice.add_path('/ManualStart',
value=0,
writeable=True)
# Manual start timer
self._dbusservice.add_path('/ManualStartTimer',
value=0,
writeable=True)
# Silent mode active
self._dbusservice.add_path('/SilentMode', value=0)
# Battery services
self._dbusservice.add_path('/AvailableBatteryServices',
value=None)
# Vebus services
self._dbusservice.add_path('/AvailableVebusServices',
value=None)
# As the user can select the vebus service and is not yet possible to get the servie name from the gui
# we need to provide it
self._dbusservice.add_path('/VebusServiceName', value=None)
self._determineservices()
self._batteryservice = None
self._vebusservice = None
self._populate_services_list()
self._determineservices()
if self._batteryservice is not None:
logger.info(
'Battery service we need (%s) found! Using it for generator start/stop'
% self._get_service_path(
self._settings['batteryservice']))
elif self._vebusservice is not None:
logger.info(
'VE.Bus service we need (%s) found! Using it for generator start/stop'
%
self._get_service_path(self._settings['vebusservice']))
else:
self._populate_services_list()
self._determineservices()
else:
if self._dbusservice is not None:
self._stop_generator()
self._batteryservice = None
self._vebusservice = None
self._dbusservice.__del__()
self._dbusservice = None
# Reset conditions
for condition in self._condition_stack:
self._reset_condition(self._condition_stack[condition])
logger.info(
'Relay function is no longer set to generator start/stop: made sure generator is off '
+ 'and now going off dbus')
def _device_added(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
def _device_removed(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
def _dbus_value_changed(self, dbusServiceName, dbusPath, options, changes,
deviceInstance):
self._evaluate_if_we_are_needed()
self._changed = True
# Update relay state when polarity is changed
if dbusPath == '/Settings/Relay/Polarity':
self._update_relay()
def _handle_changed_setting(self, setting, oldvalue, newvalue):
self._changed = True
self._evaluate_if_we_are_needed()
if setting == 'Polarity':
self._update_relay()
if self._dbusservice is not None and setting == 'maintenanceinterval':
self._dbusservice[
'/MaintenanceIntervalRuntime'] = self._interval_runtime(
self._settings['maintenanceinterval'])
def _gettext(self, path, value):
if path == '/NextMaintenance':
# Locale format date
d = datetime.datetime.fromtimestamp(value)
return d.strftime('%c')
elif path in [
'/Runtime', '/MaintenanceIntervalRuntime', '/TodayRuntime'
]:
m, s = divmod(value, 60)
h, m = divmod(m, 60)
return '%dh, %dm, %ds' % (h, m, s)
else:
return value
def _handletimertick(self):
# try catch, to make sure that we kill ourselves on an error. Without this try-catch, there would
# be an error written to stdout, and then the timer would not be restarted, resulting in a dead-
# lock waiting for manual intervention -> not good!
# To keep accuracy, conditions will forced to be evaluated each second when the generator or a timer is running
try:
if self._dbusservice is not None and (
self._changed or self._dbusservice['/State'] == 1
or self._dbusservice['/ManualStart'] == 1
or self.timer_runnning):
self._evaluate_startstop_conditions()
self._changed = False
except:
self._stop_generator()
import traceback
traceback.print_exc()
sys.exit(1)
return True
def _evaluate_startstop_conditions(self):
# Conditions will be evaluated in this order
conditions = ['soc', 'acload', 'batterycurrent', 'batteryvoltage']
start = False
runningbycondition = None
today = calendar.timegm(datetime.date.today().timetuple())
self.timer_runnning = False
values = self._get_updated_values()
self._check_silent_mode()
# New day, register it
if self._last_counters_check < today and self._dbusservice[
'/State'] == 0:
self._last_counters_check = today
self._update_accumulated_time()
# Update current and accumulated runtime.
if self._dbusservice['/State'] == 1:
self._dbusservice['/Runtime'] = int(time.time() - self._starttime)
# By performance reasons, accumulated runtime is onle updated
# once per 10s. When the generator stops is also updated.
if self._dbusservice['/Runtime'] - self._last_runtime_update >= 10:
self._update_accumulated_time()
if self._evaluate_manual_start():
runningbycondition = 'manual'
start = True
# Evaluate value conditions
for condition in conditions:
start = self._evaluate_condition(self._condition_stack[condition],
values[condition]) or start
runningbycondition = condition if start and runningbycondition is None else runningbycondition
if self._evaluate_maintenance_condition() and not start:
runningbycondition = 'maintenance'
start = True
if start:
self._start_generator(runningbycondition)
else:
self._stop_generator()
def _reset_condition(self, condition):
condition['reached'] = False
if condition['timed']:
condition['start_timer'] = 0
condition['stop_timer'] = 0
def _check_condition(self, condition, value):
name = condition['name']
if self._settings[name + 'enabled'] == 0:
if condition['enabled']:
condition['enabled'] = False
logger.info('Disabling (%s) condition' % name)
self._reset_condition(condition)
return False
elif not condition['enabled']:
condition['enabled'] = True
logger.info('Enabling (%s) condition' % name)
if value is None and condition['valid']:
logger.info(
'Error getting (%s) value, skipping evaluation till get a valid value'
% name)
self._reset_condition(condition)
condition['valid'] = False
return False
elif value is not None and not condition['valid']:
logger.info('Success getting (%s) value, resuming evaluation' %
name)
condition['valid'] = True
return condition['valid']
def _evaluate_condition(self, condition, value):
name = condition['name']
setting = ('em_'
if self._dbusservice['/SilentMode'] == 1 else '') + name
startvalue = self._settings[setting + 'start']
stopvalue = self._settings[setting + 'stop']
# Check if the have to be evaluated
if not self._check_condition(condition, value):
return False
# As this is a generic evaluation method, we need to know how to compare the values
# first check if start value should be greater than stop value and then compare
start_is_greater = startvalue > stopvalue
# When the condition is already reached only the stop value can set it to False
start = condition['reached'] or (
value >= startvalue if start_is_greater else value <= startvalue)
stop = value <= stopvalue if start_is_greater else value >= stopvalue
# Timed conditions must start/stop after the condition has been reached for a minimum
# time.
if condition['timed']:
if not condition['reached'] and start:
condition['start_timer'] += time.time(
) if condition['start_timer'] == 0 else 0
start = time.time(
) - condition['start_timer'] >= self._settings[name +
'starttimer']
condition['stop_timer'] *= int(not start)
self.timer_runnning = True
else:
condition['start_timer'] = 0
if condition['reached'] and stop:
condition['stop_timer'] += time.time(
) if condition['stop_timer'] == 0 else 0
stop = time.time() - condition['stop_timer'] >= self._settings[
name + 'stoptimer']
condition['stop_timer'] *= int(not stop)
self.timer_runnning = True
else:
condition['stop_timer'] = 0
condition['reached'] = start and not stop
return condition['reached']
def _evaluate_manual_start(self):
if self._dbusservice['/ManualStart'] == 0:
return False
start = True
# If /ManualStartTimer has a value greater than zero will use it to set a stop timer.
# If no timer is set, the generator will not stop until the user stops it manually.
# Once started by manual start, each evaluation the timer is decreased
if self._dbusservice['/ManualStartTimer'] != 0:
self._manualstarttimer += time.time(
) if self._manualstarttimer == 0 else 0
self._dbusservice['/ManualStartTimer'] -= int(time.time()) - int(
self._manualstarttimer)
self._manualstarttimer = time.time()
start = self._dbusservice['/ManualStartTimer'] > 0
self._dbusservice['/ManualStart'] = int(start)
# Reset if timer is finished
self._manualstarttimer *= int(start)
self._dbusservice['/ManualStartTimer'] *= int(start)
return start
def _evaluate_maintenance_condition(self):
if self._settings['maintenanceenabled'] == 0:
self._dbusservice['/SkipMaintenance'] = None
self._dbusservice['/NextMaintenance'] = None
return False
today = datetime.date.today()
try:
startdate = datetime.date.fromtimestamp(
self._settings['maintenancestartdate'])
starttime = time.mktime(
today.timetuple()) + self._settings['maintenancestarttimer']
except ValueError:
logger.debug('Invalid dates, skipping maintenance')
return False
# If start date is in the future set as NextMaintenance and stop evaluating
if startdate > today:
self._dbusservice['/NextMaintenance'] = time.mktime(
startdate.timetuple())
return False
start = False
# If the accumulated runtime during the maintenance interval is greater than '/MaintenanceIntervalRuntime'
# the maintenance must be skipped
needed = (self._settings['maintenanceskipruntime'] >
self._dbusservice['/MaintenanceIntervalRuntime']
or self._settings['maintenanceskipruntime'] == 0)
self._dbusservice['/SkipMaintenance'] = int(not needed)
interval = self._settings['maintenanceinterval']
stoptime = starttime + self._settings['maintenanceruntime']
elapseddays = (today - startdate).days
mod = elapseddays % interval
start = (not bool(mod) and (time.time() >= starttime)
and (time.time() <= stoptime))
if not bool(mod) and (time.time() <= stoptime):
self._dbusservice['/NextMaintenance'] = starttime
else:
self._dbusservice['/NextMaintenance'] = (
time.mktime(
(today +
datetime.timedelta(days=interval - mod)).timetuple()) +
self._settings['maintenancestarttimer'])
return start and needed
def _check_silent_mode(self):
active = False
if self._settings['silentmodeenabled'] == 1:
# Seconds after today 00:00
timeinseconds = time.time() - time.mktime(
datetime.date.today().timetuple())
silentmodestart = self._settings['silentmodestarttimer']
silentmodeend = self._settings['silentmodeendtime']
# Check if the current time is between the start time and end time
if silentmodestart < silentmodeend:
active = silentmodestart <= timeinseconds and timeinseconds < silentmodeend
else: # End time is lower than start time, example Start: 21:00, end: 08:00
active = not (silentmodeend < timeinseconds
and timeinseconds < silentmodestart)
if self._dbusservice['/SilentMode'] == 0 and active:
logger.info(
'Entering silent mode, only emergency values will be evaluated'
)
elif self._dbusservice['/SilentMode'] == 1 and not active:
logger.info('Leaving silent mode')
self._dbusservice['/SilentMode'] = int(active)
return active
def _update_accumulated_time(self):
seconds = self._dbusservice['/Runtime']
accumulated = seconds - self._last_runtime_update
self._settings['accumulatedtotal'] = int(
self._settings['accumulatedtotal']) + accumulated
# Using calendar to get timestamp in UTC, not local time
today_date = str(calendar.timegm(datetime.date.today().timetuple()))
# If something goes wrong getting the json string create a new one
try:
accumulated_days = json.loads(self._settings['accumulateddaily'])
except ValueError:
accumulated_days = {today_date: 0}
if (today_date in accumulated_days):
accumulated_days[today_date] += accumulated
else:
accumulated_days[today_date] = accumulated
self._last_runtime_update = seconds
# Keep the historical with a maximum of HISTORY_DAYS
while len(accumulated_days) > self.HISTORY_DAYS:
accumulated_days.pop(min(accumulated_days.keys()), None)
# Upadate settings
self._settings['accumulateddaily'] = json.dumps(accumulated_days,
sort_keys=True)
self._dbusservice['/TodayRuntime'] = self._interval_runtime(0)
self._dbusservice[
'/MaintenanceIntervalRuntime'] = self._interval_runtime(
self._settings['maintenanceinterval'])
def _interval_runtime(self, days):
summ = 0
try:
daily_record = json.loads(self._settings['accumulateddaily'])
except ValueError:
return 0
for i in range(days + 1):
previous_day = calendar.timegm(
(datetime.date.today() -
datetime.timedelta(days=i)).timetuple())
if str(previous_day) in daily_record.keys():
summ += daily_record[str(previous_day)] if str(
previous_day) in daily_record.keys() else 0
return summ
def _get_updated_values(self):
values = {
'batteryvoltage': None,
'batterycurrent': None,
'soc': None,
'acload': None
}
# Update values from battery monitor
if self._batteryservice is not None:
batteryservicetype = self._batteryservice.split('.')[2]
values['soc'] = self._dbusmonitor.get_value(
self._batteryservice, '/Soc')
if batteryservicetype == 'battery':
values['batteryvoltage'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/V')
values['batterycurrent'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/0/I') * -1
elif batteryservicetype == 'vebus':
values['batteryvoltage'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/V')
values['batterycurrent'] = self._dbusmonitor.get_value(
self._batteryservice, '/Dc/I') * -1
if self._vebusservice is not None:
values['acload'] = self._dbusmonitor.get_value(
self._vebusservice, '/Ac/Out/P')
return values
def _populate_services_list(self):
vebusservices = self._dbusmonitor.get_service_list(
'com.victronenergy.vebus')
batteryservices = self._dbusmonitor.get_service_list(
'com.victronenergy.battery')
self._remove_unconnected_services(vebusservices)
# User can set a vebus as battery monitor, add the option
batteryservices.update(vebusservices)
vebus = {self.SERVICE_NOVEBUS: 'None'}
battery = {self.SERVICE_NOBATTERY: 'None'}
for servicename, instance in vebusservices.items():
key = '%s/%s' % ('.'.join(servicename.split('.')[0:3]), instance)
vebus[key] = self._get_readable_service_name(servicename)
for servicename, instance in batteryservices.items():
key = '%s/%s' % ('.'.join(servicename.split('.')[0:3]), instance)
battery[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableBatteryServices'] = json.dumps(battery)
self._dbusservice['/AvailableVebusServices'] = json.dumps(vebus)
def _determineservices(self):
vebusservice = self._settings['vebusservice']
batteryservice = self._settings['batteryservice']
if batteryservice != self.SERVICE_NOBATTERY and batteryservice != '':
self._batteryservice = self._get_service_path(batteryservice)
else:
self._batteryservice = None
if vebusservice != self.SERVICE_NOVEBUS and vebusservice != '':
self._vebusservice = self._get_service_path(vebusservice)
self._dbusservice['/VebusServiceName'] = self._vebusservice
else:
self._vebusservice = None
self._changed = True
def _get_readable_service_name(self, servicename):
return (self._dbusmonitor.get_value(servicename, '/ProductName') +
' on ' +
self._dbusmonitor.get_value(servicename, '/Mgmt/Connection'))
def _remove_unconnected_services(self, services):
# Workaround: because com.victronenergy.vebus is available even when there is no vebus product
# connected. Remove any that is not connected. For this, we use /State since mandatory path
# /Connected is not implemented in mk2dbus.
for servicename in services.keys():
if ((servicename.split('.')[2] == 'vebus' and
self._dbusmonitor.get_value(servicename, '/State') is None) or
self._dbusmonitor.get_value(servicename, '/Connected') != 1
or self._dbusmonitor.get_value(servicename, '/ProductName')
is None or self._dbusmonitor.get_value(
servicename, '/Mgmt/Connection') is None):
del services[servicename]
def _get_service_path(self, service):
s = service.split('/')
assert len(s) == 2, 'The setting (%s) is invalid!' % service
serviceclass = s[0]
instance = int(s[1])
services = self._dbusmonitor.get_service_list(classfilter=serviceclass)
if instance not in services.values():
# Once chosen battery monitor does not exist. Don't auto change the setting (it might come
# back). And also don't autoselect another.
servicepath = None
else:
# According to https://www.python.org/dev/peps/pep-3106/, dict.keys() and dict.values()
# always have the same order.
servicepath = services.keys()[services.values().index(instance)]
return servicepath
def _start_generator(self, condition):
# This function will start the generator in the case generator not
# already running. When differs, the RunningByCondition is updated
if self._dbusservice['/State'] == 0:
self._dbusservice['/State'] = 1
self._update_relay()
self._starttime = time.time()
logger.info('Starting generator by %s condition' % condition)
elif self._dbusservice['/RunningByCondition'] != condition:
logger.info(
'Generator previously running by %s condition is now running by %s condition'
% (self._dbusservice['/RunningByCondition'], condition))
self._dbusservice['/RunningByCondition'] = condition
def _stop_generator(self):
if self._dbusservice['/State'] == 1:
self._dbusservice['/State'] = 0
self._update_relay()
logger.info('Stopping generator that was running by %s condition' %
str(self._dbusservice['/RunningByCondition']))
self._dbusservice['/RunningByCondition'] = ''
self._update_accumulated_time()
self._starttime = 0
self._dbusservice['/Runtime'] = 0
self._dbusservice['/ManualStartTimer'] = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
def _update_relay(self):
# Relay polarity 0 = NO, 1 = NC
polarity = bool(
self._dbusmonitor.get_value('com.victronenergy.settings',
'/Settings/Relay/Polarity'))
w = int(not polarity) if bool(
self._dbusservice['/State']) else int(polarity)
try:
f = open(self.RELAY_GPIO_FILE, 'w')
f.write(str(w))
f.close()
except IOError:
logger.info('Error writting to the relay GPIO file!: %s' %
self.RELAY_GPIO_FILE)
def __init__(self, dbusmonitor_gen=None, dbusservice_gen=None, settings_device_gen=None):
self.STATE_IDLE = 0
self.STATE_CHARGING = 1
self.STATE_DISCHARGING = 2
self.BATSERVICE_DEFAULT = 'default'
self.BATSERVICE_NOBATTERY = 'nobattery'
# Why this dummy? Because DbusMonitor expects these values to be there, even though we don't
# need them. So just add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
dbus_tree = {
'com.victronenergy.solarcharger': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy},
'com.victronenergy.pvinverter': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy,
'/Position': dummy,
'/ProductId': dummy},
'com.victronenergy.battery': {
'/Connected': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy,
'/TimeToGo': dummy,
'/ConsumedAmphours': dummy},
'com.victronenergy.vebus' : {
'/Ac/ActiveIn/ActiveInput': dummy,
'/Ac/ActiveIn/L1/P': dummy,
'/Ac/ActiveIn/L2/P': dummy,
'/Ac/ActiveIn/L3/P': dummy,
'/Ac/Out/L1/P': dummy,
'/Ac/Out/L2/P': dummy,
'/Ac/Out/L3/P': dummy,
'/Hub4/AcPowerSetpoint': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy,
'/Dc/0/Power': dummy,
'/Soc': dummy},
'com.victronenergy.charger': {
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/Dc/0/Voltage': dummy,
'/Dc/0/Current': dummy},
'com.victronenergy.grid' : {
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId' : dummy,
'/DeviceType' : dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy},
'com.victronenergy.genset' : {
'/ProductName': dummy,
'/Mgmt/Connection': dummy,
'/ProductId' : dummy,
'/DeviceType' : dummy,
'/Ac/L1/Power': dummy,
'/Ac/L2/Power': dummy,
'/Ac/L3/Power': dummy},
'com.victronenergy.settings' : {
'/Settings/SystemSetup/AcInput1' : dummy,
'/Settings/SystemSetup/AcInput2' : dummy}
}
if dbusmonitor_gen is None:
self._dbusmonitor = DbusMonitor(dbus_tree, self._dbus_value_changed, self._device_added, self._device_removed)
else:
self._dbusmonitor = dbusmonitor_gen(dbus_tree)
# Connect to localsettings
supported_settings = {
'batteryservice': ['/Settings/SystemSetup/BatteryService', self.BATSERVICE_DEFAULT, 0, 0],
'hasdcsystem': ['/Settings/SystemSetup/HasDcSystem', 0, 0, 1],
'writevebussoc': ['/Settings/SystemSetup/WriteVebusSoc', 0, 0, 1]}
if settings_device_gen is None:
self._settings = SettingsDevice(
bus=dbus.SessionBus() if 'DBUS_SESSION_BUS_ADDRESS' in os.environ else dbus.SystemBus(),
supportedSettings=supported_settings,
eventCallback=self._handlechangedsetting)
else:
self._settings = settings_device_gen(supported_settings, self._handlechangedsetting)
# put ourselves on the dbus
if dbusservice_gen is None:
self._dbusservice = VeDbusService('com.victronenergy.system')
else:
self._dbusservice = dbusservice_gen('com.victronenergy.system')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareVersion,
connection='data from other dbus processes',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# At this moment, VRM portal ID is the MAC address of the CCGX. Anyhow, it should be string uniquely
# identifying the CCGX.
self._dbusservice.add_path('/Serial', value=get_vrm_portal_id())
self._dbusservice.add_path(
'/AvailableBatteryServices', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/AvailableBatteryMeasurements', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/AutoSelectedBatteryService', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/AutoSelectedBatteryMeasurement', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/ActiveBatteryService', value=None, gettextcallback=self._gettext)
self._dbusservice.add_path(
'/PvInvertersProductIds', value=None)
self._summeditems = {
'/Ac/Grid/L1/Power': {'gettext': '%.0F W'},
'/Ac/Grid/L2/Power': {'gettext': '%.0F W'},
'/Ac/Grid/L3/Power': {'gettext': '%.0F W'},
'/Ac/Grid/Total/Power': {'gettext': '%.0F W'},
'/Ac/Grid/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/Grid/ProductId': {'gettext': '%s'},
'/Ac/Grid/DeviceType': {'gettext': '%s'},
'/Ac/Genset/L1/Power': {'gettext': '%.0F W'},
'/Ac/Genset/L2/Power': {'gettext': '%.0F W'},
'/Ac/Genset/L3/Power': {'gettext': '%.0F W'},
'/Ac/Genset/Total/Power': {'gettext': '%.0F W'},
'/Ac/Genset/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/Genset/ProductId': {'gettext': '%s'},
'/Ac/Genset/DeviceType': {'gettext': '%s'},
'/Ac/Consumption/L1/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/L2/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/L3/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/Total/Power': {'gettext': '%.0F W'},
'/Ac/Consumption/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/L1/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/L2/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/L3/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/Total/Power': {'gettext': '%.0F W'},
'/Ac/PvOnOutput/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/L1/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/L2/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/L3/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/Total/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGrid/NumberOfPhases': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/L1/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/L2/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/L3/Power': {'gettext': '%.0F W'},
'/Ac/PvOnGenset/NumberOfPhases': {'gettext': '%d'},
'/Ac/PvOnGenset/Total/Power': {'gettext': '%.0F W'},
'/Dc/Pv/Power': {'gettext': '%.0F W'},
'/Dc/Pv/Current': {'gettext': '%.1F A'},
'/Dc/Battery/Voltage': {'gettext': '%.2F V'},
'/Dc/Battery/Current': {'gettext': '%.1F A'},
'/Dc/Battery/Power': {'gettext': '%.0F W'},
'/Dc/Battery/Soc': {'gettext': '%.0F %%'},
'/Dc/Battery/State': {'gettext': '%s'},
'/Dc/Battery/TimeToGo': {'gettext': '%.0F s'},
'/Dc/Battery/ConsumedAmphours': {'gettext': '%.1F Ah'},
'/Dc/Charger/Power': {'gettext': '%.0F %%'},
'/Dc/Vebus/Current': {'gettext': '%.1F A'},
'/Dc/Vebus/Power': {'gettext': '%.0F W'},
'/Dc/System/Power': {'gettext': '%.0F W'},
'/Hub': {'gettext': '%s'},
'/Ac/ActiveIn/Source': {'gettext': '%s'},
'/VebusService': {'gettext': '%s'}
}
for path in self._summeditems.keys():
self._dbusservice.add_path(path, value=None, gettextcallback=self._gettext)
self._batteryservice = None
self._determinebatteryservice()
if self._batteryservice is None:
logger.info("Battery service initialized to None (setting == %s)" %
self._settings['batteryservice'])
self._changed = True
for service, instance in self._dbusmonitor.get_service_list().items():
self._device_added(service, instance, do_service_change=False)
self._handleservicechange()
self._updatevalues()
self._writeVebusSocCounter = 9
gobject.timeout_add(1000, exit_on_error, self._handletimertick)
class DbusGenerator:
def __init__(self, retries=300):
self._bus = dbus.SystemBus() if (
platform.machine() == 'armv7l' or 'DBUS_SESSION_BUS_ADDRESS'
not in environ) else dbus.SessionBus()
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.HISTORY_DAYS = 30
# One second per retry
self.RETRIES_ON_ERROR = retries
self._testrun_soc_retries = 0
self._last_counters_check = 0
self._dbusservice = None
self._starttime = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
self._timer_runnning = 0
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = True
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
self._vebusservice = None
self._vebusservice_available = False
self._relay_state_import = None
self._condition_stack = {
'batteryvoltage': {
'name': 'batteryvoltage',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'batterycurrent': {
'name': 'batterycurrent',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
},
'acload': {
'name': 'acload',
'reached': False,
'boolean': False,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'inverterhightemp': {
'name': 'inverterhightemp',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'inverteroverload': {
'name': 'inverteroverload',
'reached': False,
'boolean': True,
'timed': True,
'start_timer': 0,
'stop_timer': 0,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'vebus'
},
'soc': {
'name': 'soc',
'reached': False,
'boolean': False,
'timed': False,
'valid': True,
'enabled': False,
'retries': 0,
'monitoring': 'battery'
}
}
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {
'code': None,
'whenToLog': 'configChange',
'accessLevel': None
}
# TODO: possible improvement: don't use the DbusMonitor it all, since we are only monitoring
# a set of static values which will always be available. DbusMonitor watches for services
# that come and go, and takes care of automatic signal subscribtions etc. etc: all not necessary
# in this use case where we have fixed services names (com.victronenergy.settings, and c
# com.victronenergy.system).
self._dbusmonitor = DbusMonitor({
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy,
'/Settings/System/TimeZone': dummy,
},
'com.victronenergy.system': { # This is not our setting so do it here. not in supportedSettings
'/Ac/Consumption/Total/Power': dummy,
'/Ac/PvOnOutput/Total/Power': dummy,
'/Ac/PvOnGrid/Total/Power': dummy,
'/Ac/PvOnGenset/Total/Power': dummy,
'/Dc/Pv/Power': dummy,
'/AutoSelectedBatteryMeasurement': dummy,
}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Set timezone to user selected timezone
environ['TZ'] = self._dbusmonitor.get_value(
'com.victronenergy.settings', '/Settings/System/TimeZone')
# Connect to localsettings
self._settings = SettingsDevice(
bus=self._bus,
supportedSettings={
'autostart':
['/Settings/Generator0/AutoStartEnabled', 1, 0, 1],
'accumulateddaily':
['/Settings/Generator0/AccumulatedDaily', '', 0, 0],
'accumulatedtotal':
['/Settings/Generator0/AccumulatedTotal', 0, 0, 0],
'batterymeasurement':
['/Settings/Generator0/BatteryService', "default", 0, 0],
'minimumruntime':
['/Settings/Generator0/MinimumRuntime', 0, 0,
86400], # minutes
# On permanent loss of communication: 0 = Stop, 1 = Start, 2 = keep running
'onlosscommunication':
['/Settings/Generator0/OnLossCommunication', 0, 0, 2],
# Quiet hours
'quiethoursenabled':
['/Settings/Generator0/QuietHours/Enabled', 0, 0, 1],
'quiethoursstarttime':
['/Settings/Generator0/QuietHours/StartTime', 75600, 0, 86400],
'quiethoursendtime':
['/Settings/Generator0/QuietHours/EndTime', 21600, 0, 86400],
# SOC
'socenabled': ['/Settings/Generator0/Soc/Enabled', 0, 0, 1],
'socstart':
['/Settings/Generator0/Soc/StartValue', 90, 0, 100],
'socstop': ['/Settings/Generator0/Soc/StopValue', 90, 0, 100],
'qh_socstart':
['/Settings/Generator0/Soc/QuietHoursStartValue', 90, 0, 100],
'qh_socstop':
['/Settings/Generator0/Soc/QuietHoursStopValue', 90, 0, 100],
# Voltage
'batteryvoltageenabled': [
'/Settings/Generator0/BatteryVoltage/Enabled', 0, 0, 1
],
'batteryvoltagestart': [
'/Settings/Generator0/BatteryVoltage/StartValue', 11.5, 0,
150
],
'batteryvoltagestop': [
'/Settings/Generator0/BatteryVoltage/StopValue', 12.4, 0,
150
],
'batteryvoltagestarttimer': [
'/Settings/Generator0/BatteryVoltage/StartTimer', 20, 0,
10000
],
'batteryvoltagestoptimer': [
'/Settings/Generator0/BatteryVoltage/StopTimer', 20, 0,
10000
],
'qh_batteryvoltagestart': [
'/Settings/Generator0/BatteryVoltage/QuietHoursStartValue',
11.9, 0, 100
],
'qh_batteryvoltagestop': [
'/Settings/Generator0/BatteryVoltage/QuietHoursStopValue',
12.4, 0, 100
],
# Current
'batterycurrentenabled': [
'/Settings/Generator0/BatteryCurrent/Enabled', 0, 0, 1
],
'batterycurrentstart': [
'/Settings/Generator0/BatteryCurrent/StartValue', 10.5,
0.5, 1000
],
'batterycurrentstop': [
'/Settings/Generator0/BatteryCurrent/StopValue', 5.5, 0,
1000
],
'batterycurrentstarttimer': [
'/Settings/Generator0/BatteryCurrent/StartTimer', 20, 0,
10000
],
'batterycurrentstoptimer': [
'/Settings/Generator0/BatteryCurrent/StopTimer', 20, 0,
10000
],
'qh_batterycurrentstart': [
'/Settings/Generator0/BatteryCurrent/QuietHoursStartValue',
20.5, 0, 1000
],
'qh_batterycurrentstop': [
'/Settings/Generator0/BatteryCurrent/QuietHoursStopValue',
15.5, 0, 1000
],
# AC load
'acloadenabled': [
'/Settings/Generator0/AcLoad/Enabled', 0, 0, 1
],
'acloadstart': [
'/Settings/Generator0/AcLoad/StartValue', 1600, 5, 100000
],
'acloadstop': [
'/Settings/Generator0/AcLoad/StopValue', 800, 0, 100000
],
'acloadstarttimer': [
'/Settings/Generator0/AcLoad/StartTimer', 20, 0, 10000
],
'acloadstoptimer': [
'/Settings/Generator0/AcLoad/StopTimer', 20, 0, 10000
],
'qh_acloadstart': [
'/Settings/Generator0/AcLoad/QuietHoursStartValue', 1900,
0, 100000
],
'qh_acloadstop': [
'/Settings/Generator0/AcLoad/QuietHoursStopValue', 1200, 0,
100000
],
# VE.Bus high temperature
'inverterhightempenabled': [
'/Settings/Generator0/InverterHighTemp/Enabled', 0, 0, 1
],
'inverterhightempstarttimer': [
'/Settings/Generator0/InverterHighTemp/StartTimer', 20, 0,
10000
],
'inverterhightempstoptimer': [
'/Settings/Generator0/InverterHighTemp/StopTimer', 20, 0,
10000
],
# VE.Bus overload
'inverteroverloadenabled': [
'/Settings/Generator0/InverterOverload/Enabled', 0, 0, 1
],
'inverteroverloadstarttimer': [
'/Settings/Generator0/InverterOverload/StartTimer', 20, 0,
10000
],
'inverteroverloadstoptimer': [
'/Settings/Generator0/InverterOverload/StopTimer', 20, 0,
10000
],
# TestRun
'testrunenabled': [
'/Settings/Generator0/TestRun/Enabled', 0, 0, 1
],
'testrunstartdate': [
'/Settings/Generator0/TestRun/StartDate',
time.time(), 0, 10000000000.1
],
'testrunstarttimer': [
'/Settings/Generator0/TestRun/StartTime', 54000, 0, 86400
],
'testruninterval': [
'/Settings/Generator0/TestRun/Interval', 28, 1, 365
],
'testrunruntime': [
'/Settings/Generator0/TestRun/Duration', 7200, 1, 86400
],
'testrunskipruntime': [
'/Settings/Generator0/TestRun/SkipRuntime', 0, 0, 100000
],
'testruntillbatteryfull': [
'/Settings/Generator0/TestRun/RunTillBatteryFull', 0, 0, 1
]
},
eventCallback=self._handle_changed_setting)
# Whenever services come or go, we need to check if it was a service we use. Note that this
# is a bit double: DbusMonitor does the same thing. But since we don't use DbusMonitor to
# monitor for com.victronenergy.battery, .vebus, .charger or any other possible source of
# battery data, it is necessary to monitor for changes in the available dbus services.
self._bus.add_signal_receiver(self._dbus_name_owner_changed,
signal_name='NameOwnerChanged')
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._update_relay()
self._changed = True
def _evaluate_if_we_are_needed(self):
if self._dbusmonitor.get_value('com.victronenergy.settings',
'/Settings/Relay/Function') == 1:
if not self._relay_state_import:
logger.info('Getting relay from systemcalc.')
try:
self._relay_state_import = VeDbusItemImport(
bus=self._bus,
serviceName='com.victronenergy.system',
path='/Relay/0/State',
eventCallback=None,
createsignal=True)
except dbus.exceptions.DBusException:
logger.info('Systemcalc relay not available.')
self._relay_state_import = None
pass
if self._dbusservice is None:
logger.info(
'Action! Going on dbus and taking control of the relay.')
relay_polarity_import = VeDbusItemImport(
bus=self._bus,
serviceName='com.victronenergy.settings',
path='/Settings/Relay/Polarity',
eventCallback=None,
createsignal=True)
# As is not possible to keep the relay state during the CCGX power cycles,
# set the relay polarity to normally open.
if relay_polarity_import.get_value() == 1:
relay_polarity_import.set_value(0)
logger.info('Setting relay polarity to normally open.')
# put ourselves on the dbus
self._dbusservice = VeDbusService(
'com.victronenergy.generator.startstop0')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareversion,
connection='generator',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# State: None = invalid, 0 = stopped, 1 = running
self._dbusservice.add_path('/State', value=0)
# Condition that made the generator start
self._dbusservice.add_path('/RunningByCondition', value='')
# Runtime
self._dbusservice.add_path('/Runtime',
value=0,
gettextcallback=self._gettext)
# Today runtime
self._dbusservice.add_path('/TodayRuntime',
value=0,
gettextcallback=self._gettext)
# Test run runtime
self._dbusservice.add_path(
'/TestRunIntervalRuntime',
value=self._interval_runtime(
self._settings['testruninterval']),
gettextcallback=self._gettext)
# Next tes trun date, values is 0 for test run disabled
self._dbusservice.add_path('/NextTestRun',
value=None,
gettextcallback=self._gettext)
# Next tes trun is needed 1, not needed 0
self._dbusservice.add_path('/SkipTestRun', value=None)
# Manual start
self._dbusservice.add_path('/ManualStart',
value=0,
writeable=True)
# Manual start timer
self._dbusservice.add_path('/ManualStartTimer',
value=0,
writeable=True)
# Silent mode active
self._dbusservice.add_path('/QuietHours', value=0)
self._determineservices()
else:
if self._dbusservice is not None:
self._stop_generator()
self._dbusservice.__del__()
self._dbusservice = None
# Reset conditions
for condition in self._condition_stack:
self._reset_condition(self._condition_stack[condition])
logger.info(
'Relay function is no longer set to generator start/stop: made sure generator is off '
+ 'and now going off dbus')
self._relay_state_import = None
def _device_added(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
self._determineservices()
def _device_removed(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
# Relay handling depends on systemcalc, if the service disappears restart
# the relay state import
if dbusservicename == "com.victronenergy.system":
self._relay_state_import = None
self._determineservices()
def _dbus_value_changed(self, dbusServiceName, dbusPath, options, changes,
deviceInstance):
if dbusPath == '/AutoSelectedBatteryMeasurement' and self._settings[
'batterymeasurement'] == 'default':
self._determineservices()
if dbusPath == '/Settings/Relay/Function':
self._evaluate_if_we_are_needed()
self._changed = True
# Update relay state when polarity is changed
if dbusPath == '/Settings/Relay/Polarity':
self._update_relay()
def _handle_changed_setting(self, setting, oldvalue, newvalue):
self._changed = True
self._evaluate_if_we_are_needed()
if setting == 'batterymeasurement':
self._determineservices()
# Reset retries and valid if service changes
for condition in self._condition_stack:
if self._condition_stack[condition]['monitoring'] == 'battery':
self._condition_stack[condition]['valid'] = True
self._condition_stack[condition]['retries'] = 0
if setting == 'autostart':
logger.info('Autostart function %s.' %
('enabled' if newvalue == 1 else 'disabled'))
if self._dbusservice is not None and setting == 'testruninterval':
self._dbusservice[
'/TestRunIntervalRuntime'] = self._interval_runtime(
self._settings['testruninterval'])
def _dbus_name_owner_changed(self, name, oldowner, newowner):
self._determineservices()
def _gettext(self, path, value):
if path == '/NextTestRun':
# Locale format date
d = datetime.datetime.fromtimestamp(value)
return d.strftime('%c')
elif path in ['/Runtime', '/TestRunIntervalRuntime', '/TodayRuntime']:
m, s = divmod(value, 60)
h, m = divmod(m, 60)
return '%dh, %dm, %ds' % (h, m, s)
else:
return value
def _handletimertick(self):
# try catch, to make sure that we kill ourselves on an error. Without this try-catch, there would
# be an error written to stdout, and then the timer would not be restarted, resulting in a dead-
# lock waiting for manual intervention -> not good!
try:
if self._dbusservice is not None:
self._evaluate_startstop_conditions()
self._changed = False
except:
self._stop_generator()
import traceback
traceback.print_exc()
sys.exit(1)
return True
def _evaluate_startstop_conditions(self):
# Conditions will be evaluated in this order
conditions = [
'soc', 'acload', 'batterycurrent', 'batteryvoltage',
'inverterhightemp', 'inverteroverload'
]
start = False
runningbycondition = None
today = calendar.timegm(datetime.date.today().timetuple())
self._timer_runnning = False
values = self._get_updated_values()
connection_lost = False
self._check_quiet_hours()
# New day, register it
if self._last_counters_check < today and self._dbusservice[
'/State'] == 0:
self._last_counters_check = today
self._update_accumulated_time()
# Update current and accumulated runtime.
if self._dbusservice['/State'] == 1:
self._dbusservice['/Runtime'] = int(time.time() - self._starttime)
# By performance reasons, accumulated runtime is only updated
# once per 10s. When the generator stops is also updated.
if self._dbusservice['/Runtime'] - self._last_runtime_update >= 10:
self._update_accumulated_time()
if self._evaluate_manual_start():
runningbycondition = 'manual'
start = True
# Autostart conditions will only be evaluated if the autostart functionality is enabled
if self._settings['autostart'] == 1:
if self._evaluate_testrun_condition():
runningbycondition = 'testrun'
start = True
# Evaluate value conditions
for condition in conditions:
start = self._evaluate_condition(
self._condition_stack[condition],
values[condition]) or start
runningbycondition = condition if start and runningbycondition is None else runningbycondition
# Connection lost is set to true if the numbear of retries of one or more enabled conditions
# >= RETRIES_ON_ERROR
if self._condition_stack[condition]['enabled']:
connection_lost = self._condition_stack[condition][
'retries'] >= self.RETRIES_ON_ERROR
# If none condition is reached check if connection is lost and start/keep running the generator
# depending on '/OnLossCommunication' setting
if not start and connection_lost:
# Start always
if self._settings['onlosscommunication'] == 1:
start = True
runningbycondition = 'lossofcommunication'
# Keep running if generator already started
if self._dbusservice['/State'] == 1 and self._settings[
'onlosscommunication'] == 2:
start = True
runningbycondition = 'lossofcommunication'
if start:
self._start_generator(runningbycondition)
elif (self._dbusservice['/Runtime'] >=
self._settings['minimumruntime'] * 60
or self._dbusservice['/RunningByCondition'] == 'manual'):
self._stop_generator()
def _reset_condition(self, condition):
condition['reached'] = False
if condition['timed']:
condition['start_timer'] = 0
condition['stop_timer'] = 0
def _check_condition(self, condition, value):
name = condition['name']
if self._settings[name + 'enabled'] == 0:
if condition['enabled']:
condition['enabled'] = False
logger.info('Disabling (%s) condition' % name)
condition['retries'] = 0
condition['valid'] = True
self._reset_condition(condition)
return False
elif not condition['enabled']:
condition['enabled'] = True
logger.info('Enabling (%s) condition' % name)
if (condition['monitoring']
== 'battery') and (self._settings['batterymeasurement']
== 'nobattery'):
return False
if value is None and condition['valid']:
if condition['retries'] >= self.RETRIES_ON_ERROR:
logger.info(
'Error getting (%s) value, skipping evaluation till get a valid value'
% name)
self._reset_condition(condition)
self._comunnication_lost = True
condition['valid'] = False
else:
condition['retries'] += 1
if condition['retries'] == 1 or (condition['retries'] %
10) == 0:
logger.info('Error getting (%s) value, retrying(#%i)' %
(name, condition['retries']))
return False
elif value is not None and not condition['valid']:
logger.info('Success getting (%s) value, resuming evaluation' %
name)
condition['valid'] = True
condition['retries'] = 0
# Reset retries if value is valid
if value is not None:
condition['retries'] = 0
return condition['valid']
def _evaluate_condition(self, condition, value):
name = condition['name']
setting = ('qh_'
if self._dbusservice['/QuietHours'] == 1 else '') + name
startvalue = self._settings[setting +
'start'] if not condition['boolean'] else 1
stopvalue = self._settings[setting +
'stop'] if not condition['boolean'] else 0
# Check if the condition has to be evaluated
if not self._check_condition(condition, value):
# If generator is started by this condition and value is invalid
# wait till RETRIES_ON_ERROR to skip the condition
if condition['reached'] and condition[
'retries'] <= self.RETRIES_ON_ERROR:
return True
return False
# As this is a generic evaluation method, we need to know how to compare the values
# first check if start value should be greater than stop value and then compare
start_is_greater = startvalue > stopvalue
# When the condition is already reached only the stop value can set it to False
start = condition['reached'] or (
value >= startvalue if start_is_greater else value <= startvalue)
stop = value <= stopvalue if start_is_greater else value >= stopvalue
# Timed conditions must start/stop after the condition has been reached for a minimum
# time.
if condition['timed']:
if not condition['reached'] and start:
condition['start_timer'] += time.time(
) if condition['start_timer'] == 0 else 0
start = time.time(
) - condition['start_timer'] >= self._settings[name +
'starttimer']
condition['stop_timer'] *= int(not start)
self._timer_runnning = True
else:
condition['start_timer'] = 0
if condition['reached'] and stop:
condition['stop_timer'] += time.time(
) if condition['stop_timer'] == 0 else 0
stop = time.time() - condition['stop_timer'] >= self._settings[
name + 'stoptimer']
condition['stop_timer'] *= int(not stop)
self._timer_runnning = True
else:
condition['stop_timer'] = 0
condition['reached'] = start and not stop
return condition['reached']
def _evaluate_manual_start(self):
if self._dbusservice['/ManualStart'] == 0:
if self._dbusservice['/RunningByCondition'] == 'manual':
self._dbusservice['/ManualStartTimer'] = 0
return False
start = True
# If /ManualStartTimer has a value greater than zero will use it to set a stop timer.
# If no timer is set, the generator will not stop until the user stops it manually.
# Once started by manual start, each evaluation the timer is decreased
if self._dbusservice['/ManualStartTimer'] != 0:
self._manualstarttimer += time.time(
) if self._manualstarttimer == 0 else 0
self._dbusservice['/ManualStartTimer'] -= int(time.time()) - int(
self._manualstarttimer)
self._manualstarttimer = time.time()
start = self._dbusservice['/ManualStartTimer'] > 0
self._dbusservice['/ManualStart'] = int(start)
# Reset if timer is finished
self._manualstarttimer *= int(start)
self._dbusservice['/ManualStartTimer'] *= int(start)
return start
def _evaluate_testrun_condition(self):
if self._settings['testrunenabled'] == 0:
self._dbusservice['/SkipTestRun'] = None
self._dbusservice['/NextTestRun'] = None
return False
today = datetime.date.today()
runtillbatteryfull = self._settings['testruntillbatteryfull'] == 1
soc = self._get_updated_values()['soc']
batteryisfull = runtillbatteryfull and soc == 100
try:
startdate = datetime.date.fromtimestamp(
self._settings['testrunstartdate'])
starttime = time.mktime(
today.timetuple()) + self._settings['testrunstarttimer']
except ValueError:
logger.debug('Invalid dates, skipping testrun')
return False
# If start date is in the future set as NextTestRun and stop evaluating
if startdate > today:
self._dbusservice['/NextTestRun'] = time.mktime(
startdate.timetuple())
return False
start = False
# If the accumulated runtime during the tes trun interval is greater than '/TestRunIntervalRuntime'
# the tes trun must be skipped
needed = (self._settings['testrunskipruntime'] >
self._dbusservice['/TestRunIntervalRuntime']
or self._settings['testrunskipruntime'] == 0)
self._dbusservice['/SkipTestRun'] = int(not needed)
interval = self._settings['testruninterval']
stoptime = (starttime + self._settings['testrunruntime']
) if not runtillbatteryfull else (starttime + 60)
elapseddays = (today - startdate).days
mod = elapseddays % interval
start = (not bool(mod) and (time.time() >= starttime)
and (time.time() <= stoptime))
if runtillbatteryfull:
if soc is not None:
self._testrun_soc_retries = 0
start = (start or self._dbusservice['/RunningByCondition']
== 'testrun') and not batteryisfull
elif self._dbusservice['/RunningByCondition'] == 'testrun':
if self._testrun_soc_retries < self.RETRIES_ON_ERROR:
self._testrun_soc_retries += 1
start = True
if (self._testrun_soc_retries % 10) == 0:
logger.info(
'Test run failed to get SOC value, retrying(#%i)' %
self._testrun_soc_retries)
else:
logger.info(
'Failed to get SOC after %i retries, terminating test run condition'
% self._testrun_soc_retries)
start = False
else:
start = False
if not bool(mod) and (time.time() <= stoptime):
self._dbusservice['/NextTestRun'] = starttime
else:
self._dbusservice['/NextTestRun'] = (
time.mktime(
(today +
datetime.timedelta(days=interval - mod)).timetuple()) +
self._settings['testrunstarttimer'])
return start and needed
def _check_quiet_hours(self):
active = False
if self._settings['quiethoursenabled'] == 1:
# Seconds after today 00:00
timeinseconds = time.time() - time.mktime(
datetime.date.today().timetuple())
quiethoursstart = self._settings['quiethoursstarttime']
quiethoursend = self._settings['quiethoursendtime']
# Check if the current time is between the start time and end time
if quiethoursstart < quiethoursend:
active = quiethoursstart <= timeinseconds and timeinseconds < quiethoursend
else: # End time is lower than start time, example Start: 21:00, end: 08:00
active = not (quiethoursend < timeinseconds
and timeinseconds < quiethoursstart)
if self._dbusservice['/QuietHours'] == 0 and active:
logger.info('Entering to quiet mode')
elif self._dbusservice['/QuietHours'] == 1 and not active:
logger.info('Leaving secondary quiet mode')
self._dbusservice['/QuietHours'] = int(active)
return active
def _update_accumulated_time(self):
seconds = self._dbusservice['/Runtime']
accumulated = seconds - self._last_runtime_update
self._settings['accumulatedtotal'] = int(
self._settings['accumulatedtotal']) + accumulated
# Using calendar to get timestamp in UTC, not local time
today_date = str(calendar.timegm(datetime.date.today().timetuple()))
# If something goes wrong getting the json string create a new one
try:
accumulated_days = json.loads(self._settings['accumulateddaily'])
except ValueError:
accumulated_days = {today_date: 0}
if (today_date in accumulated_days):
accumulated_days[today_date] += accumulated
else:
accumulated_days[today_date] = accumulated
self._last_runtime_update = seconds
# Keep the historical with a maximum of HISTORY_DAYS
while len(accumulated_days) > self.HISTORY_DAYS:
accumulated_days.pop(min(accumulated_days.keys()), None)
# Upadate settings
self._settings['accumulateddaily'] = json.dumps(accumulated_days,
sort_keys=True)
self._dbusservice['/TodayRuntime'] = self._interval_runtime(0)
self._dbusservice['/TestRunIntervalRuntime'] = self._interval_runtime(
self._settings['testruninterval'])
def _interval_runtime(self, days):
summ = 0
try:
daily_record = json.loads(self._settings['accumulateddaily'])
except ValueError:
return 0
for i in range(days + 1):
previous_day = calendar.timegm(
(datetime.date.today() -
datetime.timedelta(days=i)).timetuple())
if str(previous_day) in daily_record.keys():
summ += daily_record[str(previous_day)] if str(
previous_day) in daily_record.keys() else 0
return summ
def _get_updated_values(self):
values = {
'batteryvoltage':
(self._battery_measurement_voltage_import.get_value()
if self._battery_measurement_voltage_import else None),
'batterycurrent':
(self._battery_measurement_current_import.get_value()
if self._battery_measurement_current_import else None),
'soc':
self._battery_measurement_soc_import.get_value()
if self._battery_measurement_soc_import else None,
'acload':
self._dbusmonitor.get_value('com.victronenergy.system',
'/Ac/Consumption/Total/Power'),
'inverterhightemp':
(self._vebusservice_high_temperature_import.get_value()
if self._vebusservice_high_temperature_import else None),
'inverteroverload':
(self._vebusservice_overload_import.get_value()
if self._vebusservice_overload_import else None)
}
if values['batterycurrent']:
values['batterycurrent'] *= -1
return values
def _determineservices(self):
# batterymeasurement is either 'default' or 'com_victronenergy_battery_288/Dc/0'.
# In case it is set to default, we use the AutoSelected battery measurement, given by
# SystemCalc.
batterymeasurement = None
batteryservicename = None
newbatteryservice = None
batteryprefix = ""
selectedbattery = self._settings['batterymeasurement']
vebusservice = None
if selectedbattery == 'default':
batterymeasurement = self._dbusmonitor.get_value(
'com.victronenergy.system', '/AutoSelectedBatteryMeasurement')
elif len(selectedbattery.split(
"/", 1)) == 2: # Only very basic sanity checking..
batterymeasurement = self._settings['batterymeasurement']
elif selectedbattery == 'nobattery':
batterymeasurement = None
else:
# Exception: unexpected value for batterymeasurement
pass
if batterymeasurement:
batteryprefix = "/" + batterymeasurement.split("/", 1)[1]
# Get the current battery servicename
if self._battery_measurement_voltage_import:
oldservice = (
self._battery_measurement_voltage_import.serviceName +
self._battery_measurement_voltage_import.path.replace(
"/Voltage", ""))
else:
oldservice = None
if batterymeasurement:
try:
batteryservicename = VeDbusItemImport(
bus=self._bus,
serviceName="com.victronenergy.system",
path='/ServiceMapping/' +
batterymeasurement.split("/", 1)[0],
eventCallback=None,
createsignal=False)
if batteryservicename.get_value():
newbatteryservice = batteryservicename.get_value(
) + batteryprefix
except dbus.exceptions.DBusException:
pass
else:
newbatteryservice = None
if batteryservicename and batteryservicename.get_value():
self._battery_measurement_available = True
logger.info(
'Battery service we need (%s) found! Using it for generator start/stop'
% batterymeasurement)
try:
self._battery_measurement_voltage_import = VeDbusItemImport(
bus=self._bus,
serviceName=batteryservicename.get_value(),
path=batteryprefix + '/Voltage',
eventCallback=None,
createsignal=True)
self._battery_measurement_current_import = VeDbusItemImport(
bus=self._bus,
serviceName=batteryservicename.get_value(),
path=batteryprefix + '/Current',
eventCallback=None,
createsignal=True)
# Exception caused by Matthijs :), we forgot to batteryprefix the Soc during the big path-change...
self._battery_measurement_soc_import = VeDbusItemImport(
bus=self._bus,
serviceName=batteryservicename.get_value(),
path='/Soc',
eventCallback=None,
createsignal=True)
except Exception:
logger.debug('Error getting battery service!')
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
elif selectedbattery == 'nobattery' and self._battery_measurement_available:
logger.info(
'Battery monitoring disabled! Stop evaluating related conditions'
)
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = False
elif batteryservicename and batteryservicename.get_value(
) is None and self._battery_measurement_available:
logger.info(
'Battery service we need (%s) is not available! Stop evaluating related conditions'
% batterymeasurement)
self._battery_measurement_voltage_import = None
self._battery_measurement_current_import = None
self._battery_measurement_soc_import = None
self._battery_measurement_available = False
# Get the default VE.Bus service and import high temperature and overload warnings
try:
vebusservice = VeDbusItemImport(
bus=self._bus,
serviceName="com.victronenergy.system",
path='/VebusService',
eventCallback=None,
createsignal=False)
if vebusservice.get_value() and (
vebusservice.get_value() != self._vebusservice
or not self._vebusservice_available):
self._vebusservice = vebusservice.get_value()
self._vebusservice_available = True
logger.info(
'Vebus service (%s) found! Using it for generator start/stop'
% vebusservice.get_value())
self._vebusservice_high_temperature_import = VeDbusItemImport(
bus=self._bus,
serviceName=vebusservice.get_value(),
path='/Alarms/HighTemperature',
eventCallback=None,
createsignal=True)
self._vebusservice_overload_import = VeDbusItemImport(
bus=self._bus,
serviceName=vebusservice.get_value(),
path='/Alarms/Overload',
eventCallback=None,
createsignal=True)
except Exception:
logger.info('Error getting Vebus service!')
self._vebusservice_available = False
self._vebusservice_high_temperature_import = None
self._vebusservice_overload_import = None
logger.info(
'Vebus service (%s) dissapeared! Stop evaluating related conditions'
% self._vebusservice)
# Trigger an immediate check of system status
self._changed = True
def _start_generator(self, condition):
if not self._relay_state_import:
logger.info(
"Relay import not available, can't start generator by %s condition"
% condition)
return
systemcalc_relay_state = 0
state = self._dbusservice['/State']
try:
systemcalc_relay_state = self._relay_state_import.get_value()
except dbus.exceptions.DBusException:
logger.info('Error getting relay state')
# This function will start the generator in the case generator not
# already running. When differs, the RunningByCondition is updated
if state == 0 or systemcalc_relay_state != state:
self._dbusservice['/State'] = 1
self._update_relay()
self._starttime = time.time()
logger.info('Starting generator by %s condition' % condition)
elif self._dbusservice['/RunningByCondition'] != condition:
logger.info(
'Generator previously running by %s condition is now running by %s condition'
% (self._dbusservice['/RunningByCondition'], condition))
self._dbusservice['/RunningByCondition'] = condition
def _stop_generator(self):
if not self._relay_state_import:
logger.info("Relay import not available, can't stop generator")
return
systemcalc_relay_state = 1
state = self._dbusservice['/State']
try:
systemcalc_relay_state = self._relay_state_import.get_value()
except dbus.exceptions.DBusException:
logger.info('Error getting relay state')
if state == 1 or systemcalc_relay_state != state:
self._dbusservice['/State'] = 0
self._update_relay()
logger.info('Stopping generator that was running by %s condition' %
str(self._dbusservice['/RunningByCondition']))
self._dbusservice['/RunningByCondition'] = ''
self._update_accumulated_time()
self._starttime = 0
self._dbusservice['/Runtime'] = 0
self._dbusservice['/ManualStartTimer'] = 0
self._manualstarttimer = 0
self._last_runtime_update = 0
def _update_relay(self):
if not self._relay_state_import:
logger.info("Relay import not available")
return
# Relay polarity 0 = NO, 1 = NC
polarity = bool(
self._dbusmonitor.get_value('com.victronenergy.settings',
'/Settings/Relay/Polarity'))
w = int(not polarity) if bool(
self._dbusservice['/State']) else int(polarity)
try:
self._relay_state_import.set_value(dbus.Int32(w, variant_level=1))
except dbus.exceptions.DBusException:
logger.info('Error setting relay state')
class DbusPump:
def __init__(self, retries=300):
self._bus = dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus()
self.RELAY_GPIO_FILE = '/sys/class/gpio/gpio182/value'
self.HISTORY_DAYS = 30
# One second per retry
self.RETRIES_ON_ERROR = retries
self._current_retries = 0
self.TANKSERVICE_DEFAULT = 'default'
self.TANKSERVICE_NOTANK = 'notanksensor'
self._dbusservice = None
self._tankservice = self.TANKSERVICE_NOTANK
self._valid_tank_level = True
self._relay_state_import = None
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
# TODO: possible improvement: don't use the DbusMonitor it all, since we are only monitoring
# a set of static values which will always be available. DbusMonitor watches for services
# that come and go, and takes care of automatic signal subscribtions etc. etc: all not necessary
# in this use case where we have fixed services names (com.victronenergy.settings, and c
# com.victronenergy.system).
self._dbusmonitor = DbusMonitor({
'com.victronenergy.settings': { # This is not our setting so do it here. not in supportedSettings
'/Settings/Relay/Function': dummy,
'/Settings/Relay/Polarity': dummy
},
'com.victronenergy.tank': { # This is not our setting so do it here. not in supportedSettings
'/Level': dummy,
'/FluidType': dummy,
'/ProductName': dummy,
'/Mgmt/Connection': dummy
}
}, self._dbus_value_changed, self._device_added, self._device_removed)
# Connect to localsettings
self._settings = SettingsDevice(
bus=self._bus,
supportedSettings={
'tankservice': ['/Settings/Pump0/TankService', self.TANKSERVICE_NOTANK, 0, 1],
'autostart': ['/Settings/Pump0/AutoStartEnabled', 1, 0, 1],
'startvalue': ['/Settings/Pump0/StartValue', 50, 0, 100],
'stopvalue': ['/Settings/Pump0/StopValue', 80, 0, 100],
'mode': ['/Settings/Pump0/Mode', 0, 0, 100] # Auto = 0, On = 1, Off = 2
},
eventCallback=self._handle_changed_setting)
# Whenever services come or go, we need to check if it was a service we use. Note that this
# is a bit double: DbusMonitor does the same thing. But since we don't use DbusMonitor to
# monitor for com.victronenergy.battery, .vebus, .charger or any other possible source of
# battery data, it is necessary to monitor for changes in the available dbus services.
self._bus.add_signal_receiver(self._dbus_name_owner_changed, signal_name='NameOwnerChanged')
self._evaluate_if_we_are_needed()
gobject.timeout_add(1000, self._handletimertick)
self._changed = True
def _evaluate_if_we_are_needed(self):
if self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Function') == 3:
if self._dbusservice is None:
logger.info('Action! Going on dbus and taking control of the relay.')
relay_polarity_import = VeDbusItemImport(
bus=self._bus, serviceName='com.victronenergy.settings',
path='/Settings/Relay/Polarity',
eventCallback=None, createsignal=True)
if not self._relay_state_import:
logger.info('Getting relay from systemcalc.')
try:
self._relay_state_import = VeDbusItemImport(
bus=self._bus, serviceName='com.victronenergy.system',
path='/Relay/0/State',
eventCallback=None, createsignal=True)
except dbus.exceptions.DBusException:
logger.info('Systemcalc relay not available.')
self._relay_state_import = None
pass
# As is not possible to keep the relay state during the CCGX power cycles,
# set the relay polarity to normally open.
if relay_polarity_import.get_value() == 1:
relay_polarity_import.set_value(0)
logger.info('Setting relay polarity to normally open.')
# put ourselves on the dbus
self._dbusservice = VeDbusService('com.victronenergy.pump.startstop0')
self._dbusservice.add_mandatory_paths(
processname=__file__,
processversion=softwareversion,
connection='pump',
deviceinstance=0,
productid=None,
productname=None,
firmwareversion=None,
hardwareversion=None,
connected=1)
# State: None = invalid, 0 = stopped, 1 = running
self._dbusservice.add_path('/State', value=0)
self._dbusservice.add_path('/AvailableTankServices', value=None)
self._dbusservice.add_path('/ActiveTankService', value=None)
self._update_relay()
self._handleservicechange()
else:
if self._dbusservice is not None:
self._stop_pump()
self._dbusservice.__del__()
self._dbusservice = None
self._relay_state_import = None
logger.info('Relay function is no longer set to pump startstop: made sure pump is off and going off dbus')
def _device_added(self, dbusservicename, instance):
self._handleservicechange()
self._evaluate_if_we_are_needed()
def _device_removed(self, dbusservicename, instance):
self._handleservicechange()
# Relay handling depends on systemcalc, if the service disappears restart
# the relay state import
if dbusservicename == "com.victronenergy.system":
self._relay_state_import = None
self._evaluate_if_we_are_needed()
def _dbus_value_changed(self, dbusServiceName, dbusPath, options, changes, deviceInstance):
if dbusPath == '/Settings/Relay/Function':
self._evaluate_if_we_are_needed()
self._changed = True
# Update relay state when polarity changes
if dbusPath == '/Settings/Relay/Polarity':
self._update_relay()
def _handle_changed_setting(self, setting, oldvalue, newvalue):
self._changed = True
self._evaluate_if_we_are_needed()
if setting == "tankservice":
self._handleservicechange()
if setting == 'autostart':
logger.info('Autostart function %s.' % ('enabled' if newvalue == 1 else 'disabled'))
def _dbus_name_owner_changed(self, name, oldowner, newowner):
return True
def _handletimertick(self):
# try catch, to make sure that we kill ourselves on an error. Without this try-catch, there would
# be an error written to stdout, and then the timer would not be restarted, resulting in a dead-
# lock waiting for manual intervention -> not good!
try:
if self._dbusservice is not None:
self._evaluate_startstop_conditions()
self._changed = False
except:
self._stop_pump()
import traceback
traceback.print_exc()
sys.exit(1)
return True
def _evaluate_startstop_conditions(self):
if self._settings['tankservice'] == self.TANKSERVICE_NOTANK:
self._stop_pump()
return
value = self._dbusmonitor.get_value(self._tankservice, "/Level")
startvalue = self._settings['startvalue']
stopvalue = self._settings['stopvalue']
started = self._dbusservice['/State'] == 1
mode = self._settings['mode']
# On mode
if mode == 1:
if not started:
self._start_pump()
self._current_retries = 0
return
# Off mode
if mode == 2:
if started:
self._stop_pump()
self._current_retries = 0
return
# Auto mode, in case of an invalid reading start the retrying mechanism
if started and value is None and mode == 0:
# Keep the pump running during RETRIES_ON_ERROR(default 300) retries
if started and self._current_retries < self.RETRIES_ON_ERROR:
self._current_retries += 1
logger.info("Unable to get tank level, retrying (%i)" % self._current_retries)
return
# Stop the pump after RETRIES_ON_ERROR(default 300) retries
logger.info("Unable to get tank level after %i retries, stopping pump." % self._current_retries)
self._stop_pump()
return
if self._current_retries > 0 and value is not None:
logger.info("Tank level successfuly obtained after %i retries." % self._current_retries)
self._current_retries = 0
# Tank level not valid, check if is the first invalid reading
# and print a log message
if value is None:
if self._valid_tank_level:
self._valid_tank_level = False
logger.info("Unable to get tank level, skipping evaluation.")
return
# Valid reading after a previous invalid one
elif value is not None and not self._valid_tank_level:
self._valid_tank_level = True
logger.info("Tank level successfuly obtained, resuming evaluation.")
start_is_greater = startvalue > stopvalue
start = started or (value >= startvalue if start_is_greater else value <= startvalue)
stop = value <= stopvalue if start_is_greater else value >= stopvalue
if start and not stop:
self._start_pump()
else:
self._stop_pump()
def _determinetankservice(self):
s = self._settings['tankservice'].split('/')
if len(s) != 2:
logger.error("The tank setting (%s) is invalid!" % self._settings['tankservice'])
serviceclass = s[0]
instance = int(s[1]) if len(s) == 2 else None
services = self._dbusmonitor.get_service_list(classfilter=serviceclass)
if instance not in services.values():
# Once chosen tank does not exist. Don't auto change the setting (it might come
# back). And also don't autoselect another.
newtankservice = None
else:
# According to https://www.python.org/dev/peps/pep-3106/, dict.keys() and dict.values()
# always have the same order.
newtankservice = services.keys()[services.values().index(instance)]
if newtankservice != self._tankservice:
services = self._dbusmonitor.get_service_list()
instance = services.get(newtankservice, None)
if instance is None:
tank_service = None
else:
tank_service = self._get_instance_service_name(newtankservice, instance)
self._dbusservice['/ActiveTankService'] = newtankservice
logger.info("Tank service, setting == %s, changed from %s to %s (%s)" %
(self._settings['tankservice'], self._tankservice, newtankservice, instance))
self._tankservice = newtankservice
def _handleservicechange(self):
services = self._get_connected_service_list('com.victronenergy.tank')
ul = {self.TANKSERVICE_NOTANK: 'No tank sensor'}
for servicename, instance in services.items():
key = self._get_instance_service_name(servicename, instance)
ul[key] = self._get_readable_service_name(servicename)
self._dbusservice['/AvailableTankServices'] = dbus.Dictionary(ul, signature='sv')
self._determinetankservice()
def _get_readable_service_name(self, servicename):
fluidType = ['Fuel', 'Fresh water', 'Waste water', 'Live well',
'Oil', 'Black water']
fluid = fluidType[self._dbusmonitor.get_value(servicename, '/FluidType')]
return (fluid + ' on ' + self._dbusmonitor.get_value(servicename, '/Mgmt/Connection'))
def _get_instance_service_name(self, service, instance):
return '%s/%s' % ('.'.join(service.split('.')[0:3]), instance)
def _get_connected_service_list(self, classfilter=None):
services = self._dbusmonitor.get_service_list(classfilter=classfilter)
return services
def _start_pump(self):
if not self._relay_state_import:
logger.info("Relay import not available, can't start pump by %s condition" % condition)
return
systemcalc_relay_state = 0
state = self._dbusservice['/State']
try:
systemcalc_relay_state = self._relay_state_import.get_value()
except dbus.exceptions.DBusException:
logger.info('Error getting relay state')
# This function will start the pump in the case the pump not
# already running.
if state == 0 or systemcalc_relay_state != state:
self._dbusservice['/State'] = 1
self._update_relay()
self._starttime = time.time()
logger.info('Starting pump')
def _stop_pump(self):
if not self._relay_state_import:
logger.info("Relay import not available, can't stop the pump")
return
systemcalc_relay_state = 1
state = self._dbusservice['/State']
try:
systemcalc_relay_state = self._relay_state_import.get_value()
except dbus.exceptions.DBusException:
logger.info('Error getting relay state')
if state == 1 or systemcalc_relay_state != state:
self._dbusservice['/State'] = 0
logger.info('Stopping pump')
self._update_relay()
def _update_relay(self):
if not self._relay_state_import:
logger.info("Relay import not available")
return
# Relay polarity 0 = NO, 1 = NC
polarity = bool(self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Polarity'))
w = int(not polarity) if bool(self._dbusservice['/State']) else int(polarity)
try:
self._relay_state_import.set_value(dbus.Int32(w, variant_level=1))
except dbus.exceptions.DBusException:
logger.info('Error setting relay state')
def _create_dbus_monitor(self, *args, **kwargs): return DbusMonitor(*args, **kwargs)
class DbusGenerator:
def __init__(self):
self._dbusservice = None
self._batteryservice = None
self._settings = SettingsDevice(
bus=dbus.SystemBus() if (platform.machine() == 'armv7l') else dbus.SessionBus(),
supportedSettings={
'batteryinstance': ['/Settings/Generator/BatteryInstance', 0, 0, 1000],
'running': ['/Settings/Generator/Running', 0, 0, 1],
'autostopsoc': ['/Settings/Generator/AutoStopSOC', 90, 0, 100],
'autostartsoc': ['/Settings/Generator/AutoStartSOC', 10, 0, 100],
'autostartcurrent': ['/Settings/Generator/AutoStartCurrent', 0, 0, 500]
},
eventCallback=self._handle_changed_setting)
# DbusMonitor expects these values to be there, even though we don need them. So just
# add some dummy data. This can go away when DbusMonitor is more generic.
dummy = {'code': None, 'whenToLog': 'configChange', 'accessLevel': None}
self._dbusmonitor = DbusMonitor({
'com.victronenergy.battery': {
'/Dc/0/I': dummy,
'/Soc': dummy},
'com.victronenergy.settings': {
'/Settings/Relay/Function': dummy} # This is not our setting so do it here. not in supportedSettings
}, self._dbus_value_changed, self._device_added, self._device_removed)
self._evaluate_if_we_are_needed()
# Call this function on startup, when settings change or services (dis)appear
def _evaluate_if_we_are_needed(self):
# 0 == Alarm relay, 1 == Generator start/stop
# Don't touch the relay when it is not ours!
if self._dbusmonitor.get_value('com.victronenergy.settings', '/Settings/Relay/Function') == 1:
forcebatterymessage = False # todo, this can probably be coded cleaner..
if self._dbusservice is None:
logging.info("Action! Going on dbus and taking control of the relay.")
forcebatterymessage = True
# self._dbusservice = VeDbusService('com.victronenergy.generator.startstop0')
# self._dbusservice.add_mandatory_paths(
# processname=__file__,
# processversion='v%s, on Python %s' % (softwareversion, platform.python_version()),
# connection='CCGX relay and Bat. instance %s' % self._settings['batteryinstance'],
# deviceinstance=0,
# productid=0,
# productname='Genset start/stop',
# firmwareversion=0,
# hardwareversion=0,
# connected=1)
# Create our own paths
# State: None = invalid, 0 = stopped, 1 = running
# self._dbusservice.add_path('/State', None)
# Error: None = invalid, 0 = no error, 1 = no battery instance to use, genset stopped
# TODO, do we want an error for invalid soc?, genset stopped (? or do some other logic?)
# self._dbusservice.add_path('/Error', None)
# Is our battery instance available?
batteries = self._dbusmonitor.get_service_list('com.victronenergy.battery')
if self._settings['batteryinstance'] in batteries:
if self._batteryservice is None or forcebatterymessage:
logging.info("Battery instance we need (%s) found! Using it for genset start/stop"
% self._settings['batteryinstance'])
# self._dbusservice['/Error'] = 0
self._batteryservice = batteries[self._settings['batteryinstance']]
else:
if self._batteryservice is not None or forcebatterymessage:
logging.info("Battery instance (%s) not on the dbus (anymore), in case the genset was \
running, it will be stopped now" % self._settings['batteryinstance'])
# self._dbusservice['/Error'] = 1
# Genset will be stopped by _evaluate_startstop_conditions(), since soc will be None
self._batteryservice = None
self._evaluate_startstop_conditions()
else:
if self._dbusservice is not None:
# First stop the genset, so this is also signalled via the dbus
self.stop_genset()
# self._dbusService.__del__()
self._dbusService = None
self._batteryservice = None
logging.info("Relay function is no longer set to genset start/stop: made sure genset is off" +
"and now going off dbus")
def _device_added(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
def _device_removed(self, dbusservicename, instance):
self._evaluate_if_we_are_needed()
def _dbus_value_changed(self, dbusServiceName, dbusPath, options, changes, deviceInstance):
logging.debug("value changed! %s %s %s" % (dbusServiceName, dbusPath, changes))
if dbusServiceName == self._batteryservice and deviceInstance == self._settings['batteryinstance']:
self._evaluate_startstop_conditions()
elif dbusServiceName == 'com.victronenergy.settings':
self._evaluate_if_we_are_needed()
def _handle_changed_setting(self, setting, oldvalue, newvalue):
logging.info("handle changed setting called")
self._evaluate_startstop_conditions()
def _evaluate_startstop_conditions(self):
global genlaststate
logging.info("soc: %s" % (self.battery_soc()))
if self.battery_soc() is None:
logging.warning("invalid soc! stopping genset!")
self.stop_genset()
return
if (genlaststate != self._settings['running']):
if (self._settings['running'] == 0):
logging.info("manual stop")
self.stop_genset()
genlaststate = 0
return
else:
if (self.battery_soc() < self._settings['autostopsoc']):
logging.info("manual start")
self.start_genset()
genlaststate = 1
return
else:
self.stop_genset()
genlaststate = 0
return
return
return
# check that the setting is not 0=disabled and then check the values
if (self._settings['autostartsoc'] != 0 and self.battery_soc() <= self._settings['autostartsoc']):
self.start_genset()
# check that the setting is not 0=disabled and then check the values
if (self._settings['autostopsoc'] != 0 and self.battery_soc() >= self._settings['autostopsoc']):
self.stop_genset()
def battery_soc(self):
soc = self._dbusmonitor.get_value(self._batteryservice, '/Soc')
return int(soc) if soc is not None else None
def battery_current(self):
current = self._dbusmonitor.get_value(self._batteryservice, '/Dc/0/I')
return int(current) if current is not None else None
def start_genset(self):
global genlaststate
logging.info("Turning on relay and starting genset")
relayfile = file(relayFile, 'w')
relayfile.write('1\n')
relayfile.close()
system("/usr/bin/dbus -y com.victronenergy.settings /Settings/Generator/Running SetValue 1")
genlaststate = 1
def stop_genset(self):
global genlaststate
logging.info("Turning off relay and stopping genset")
relayfile = file(relayFile, 'w')
relayfile.write('0\n')
relayfile.close()
system("/usr/bin/dbus -y com.victronenergy.settings /Settings/Generator/Running SetValue 0")
genlaststate = 0
