def testDownloadFile_in_subSubDir(self):
"""
For this test to succeed, the dropbox test dir must contain one file:
SubDirOne/subDirOne.py.
The dropbox cloud folder is test_dropbox/transFileCloudTestProject
"""
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/transfiles.ini'
downloadDir = '/storage/emulated/0/Download'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\transfiles.ini'
downloadDir = 'D:\\Users\\Jean-Pierre\\Downloads'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudTestProject'
drpa = DropboxAccess(cm, projectName)
fileName = 'subDirOneSubDir.py'
fileSubDir = 'SubDirOne'
fileSubSubDir = 'SubDirOneSubDir'
cloudFilePathName = fileSubDir + '/' + fileSubSubDir + '/' + fileName
downloadedFilePathName = downloadDir + sep + fileSubDir + sep + fileSubSubDir + sep + fileName
drpa.downloadFile(cloudFilePathName, downloadedFilePathName)
# verifying that the file was downloaded
fileNameLst = [
x.split(sep)[-1]
for x in glob.glob(downloadDir + sep + fileSubDir + sep +
fileSubSubDir + sep + '*.py')
]
self.assertEqual(sorted([fileName]), sorted(fileNameLst))
# deleting downloaded file
shutil.rmtree(downloadDir + sep + fileSubDir)
def testCreateAndDeleteProjectFolder(self):
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/dropbox_access_tst.ini'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\dropbox_access_tst.ini'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudTestProjectToCreate'
# creating a DropboxAccess on an inexisting Dropbox folder
# to ensure the folder does not exist
drpa = DropboxAccess(cm, projectName)
self.assertRaises(NotADirectoryError, drpa.getCloudFileNameList)
# now, creating the project folder
drpa.createProjectFolder()
# should not raise any error
drpa.getCloudFileNameList()
# now deleting the newly created folder so that this test can be run again
drpa = DropboxAccess(cm, projectName)
drpa.deleteProjectFolder()
# verify the project folder was deleted
self.assertRaises(NotADirectoryError, drpa.getCloudFileNameList)
def testGetCloudFileNameList(self):
"""
For this test to succeed, the dropbox test dir must contain two files:
my_file_one.py and my_file_two.py.
The dropbox cloud folder is test_dropbox/transFileCloudTestProject
"""
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/transfiles.ini'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\transfiles.ini'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudTestProject'
drpa = DropboxAccess(cm, projectName)
self.assertEqual(sorted(['my_file_one.py', 'my_file_two.py']),
sorted(drpa.getCloudFileNameList()))
def initTransferFileOnProject(self, configFilePath=None, projectName=None):
"""
This method enables the transfer files utility to be executed in a loop.
It initializes the TransferFile class with the data specific to the
project selected by the user.
@param configFilePath: used for unit testing only
@param projectName used for unit testing only
@return: True if the user selects another project, False otherwise
"""
if projectName == None:
# we are not unit testing ...
projectName = self.requester.getProjectName(commandLineArgs=None)
if projectName == None:
# user did choose Quit
self.projectName = None
return False
self.projectName = projectName
self.localProjectDir = None
try:
self.localProjectDir = self.configManager.getProjectLocalDir(
self.projectName)
except KeyError as e:
# this happens only when TransferFiles is launched from the command line
# with an invalid project name passed as -p command line parm
print(
'\nProject {} not defined in configuration file {}. Program closed.\n'
.format(str(e), configFilePath))
self.projectName = None
return False
# currently, only Dropbox as cloud space is implemented
self.cloudAccess = DropboxAccess(self.configManager, self.projectName)
self.fileLister = FileLister(self.configManager)
return True
def testGetCloudFileList_invalid_cloud_dir(self):
'''
Tests that the getCloudFileNameList() method raises a NotADirectoryError
if the cloud project path which is equal to cloud transfer base dir +
'/' + projectName as defined in the tranfiles.ini file does not exist.
'''
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/dropbox_access_tst.ini'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\dropbox_access_tst.ini'
cm = ConfigManager(configFilePathName)
projectName = 'not_exist'
drpa = DropboxAccess(cm, projectName)
# project name which has an invalid (not existing) project path in the
# transfiles.ini file
invalidProjectName = 'transFileCloudInvalidProject'
self.assertRaises(NotADirectoryError, drpa.getCloudFileNameList)
class TransferFiles:
"""
This is the main class of the TransferFiles utility.
The TransferFiles utility is used to transfer files from one device to
another device using the cloud as intermediary location. What makes
TransferFiles unique is that the directory structures on both source and
target devices can be different. A local configuration file (transfiles.ini)
stores the information required for the transfer to be done correctly.
"""
def __init__(self, configFilePath=None, projectName=None):
"""
TransferFiles constructor.
@param configFilePath: used for unit testing only
@param projectName used for unit testing only
"""
if configFilePath == None:
# we are not unit testing ...
configFilePath = CONFIG_FILE_PATH_NAME
self.configManager = ConfigManager(configFilePath)
self.requester = Requester(self.configManager)
self.initTransferFileOnProject(configFilePath, projectName)
def initTransferFileOnProject(self, configFilePath=None, projectName=None):
"""
This method enables the transfer files utility to be executed in a loop.
It initializes the TransferFile class with the data specific to the
project selected by the user.
@param configFilePath: used for unit testing only
@param projectName used for unit testing only
@return: True if the user selects another project, False otherwise
"""
if projectName == None:
# we are not unit testing ...
projectName = self.requester.getProjectName(commandLineArgs=None)
if projectName == None:
# user did choose Quit
self.projectName = None
return False
self.projectName = projectName
self.localProjectDir = None
try:
self.localProjectDir = self.configManager.getProjectLocalDir(
self.projectName)
except KeyError as e:
# this happens only when TransferFiles is launched from the command line
# with an invalid project name passed as -p command line parm
print(
'\nProject {} not defined in configuration file {}. Program closed.\n'
.format(str(e), configFilePath))
self.projectName = None
return False
# currently, only Dropbox as cloud space is implemented
self.cloudAccess = DropboxAccess(self.configManager, self.projectName)
self.fileLister = FileLister(self.configManager)
return True
def transferFiles(self):
"""
This is the main TransferFiles method. Depending on the content of the
cloud space for the current project, the user is prompted for uploading
files modified locally or for downloading and transferring to the right
local dirs of the files contained on the cloud.
"""
if self.projectName == None:
# user did choose Quit
return
cloudFileLst = []
try:
if self.configManager.isProjectSubDirSynchronized(
self.projectName):
cloudFileLst = self.cloudAccess.getCloudFilePathNameList()
else:
cloudFileLst = self.cloudAccess.getCloudFileNameList()
except NotADirectoryError as e:
# means that the cloud project directory does not yet exist
if self.requester.getCreateCloudFolderConfirmation(
self.projectName):
self.cloudAccess.createProjectFolder()
else:
return
if cloudFileLst == []:
# if the cloud directory is empty, this means that we are in the state of uploading
# to the cloud the files modified on the current device so that they will be available
# to be transferred from the cloud to the local directories on the other device.
self.uploadModifiedFilesToCloud()
else:
# if the cloud directory contains files, this means that we are in the state of transferring
# those files to the current device. The transferred files will be downloaded to the
# local download dir and deleted from the cloud. They will then be moved from the download
# dir to the correct project dir and sub dirs.
self.transferFilesFromCloudToLocalDirs(cloudFileLst)
return self.initTransferFileOnProject()
def transferFilesFromCloudToLocalDirs(self, cloudFileLst):
"""
This method first ask the user to confirm the download and transfer of
the files available on the cloud. If the user refuses the download, he
will be asked if he wants instead to upload files modified locally
provided that local files exist whose modification date is after
the last update date stored in the local configuration file.
If the user confirms the download, the cloud files are downloaded to
the local download dir and then deleted from the cloud. Then, the
files are moved from the download dir to the correct project dir and
sub-dirs, using the information specified in the download section of
the project in the local configuration file.
Finally, the last synch date is updated to now in the local configuration
file.
But the user may be nn the situation where he uploaded some modified files
and then modified some uploaded files again or changed new files. In this
case, he does not accept the download and will then be prompted for
uploading the new modified files.
@param cloudFileLst: contains the list of file names for the files
available on the cloud
"""
localProjectDirShort = sep.join(self.localProjectDir.split(sep)[-3:])
questionStr = 'vvv {} files will be transferred from the cloud and then moved to the correct dir and sub-dir of {}.\nIf you want to upload new modified files instead, type N, or Enter to select another project'.format(
len(cloudFileLst), localProjectDirShort)
doDownload, doKeepFileOnCloud = self.requester.getUserConfirmation(
questionStr, cloudFileLst)
if doDownload is None:
# user typed Enter, which means he does not want to download the files
# and wants to select another project or quit.
return
if doDownload:
if self.configManager.isProjectSubDirSynchronized(
self.projectName):
# downloading the files from the cloud keeping their path component
# directly to their final destination dir, the local project dir
print('') # empty line
self.downloadAndDeleteFilesFromCloud(
downloadPath=self.localProjectDir,
cloudFileLst=cloudFileLst,
targetName='directly to the project',
doKeepFileOnCloud=doKeepFileOnCloud)
print('') # empty line
else:
# downloading the files which have no path component from the cloud
# to the download path and then moving them from the download path
# according to the sub dir parameters defined in the configuration
# file for the project
print('') # empty line
self.downloadAndDeleteFilesFromCloud(
downloadPath=self.configManager.downloadPath,
cloudFileLst=cloudFileLst,
targetName='to download',
doKeepFileOnCloud=doKeepFileOnCloud)
print('') # empty line
# moving file from download dir to project dest dir and sub-dirs
# according to the sub dir parameters defined in the configuration
# file for the project
fileMover = FileMover(self.configManager, self.projectName)
fileMover.moveFilesToLocalDirs(cloudFileLst)
# updating last synch time for the project in the local config file
self.updateLastSynchTime()
else:
# lists modified local files and asks if they should be uploaded. Handles
# the case where you did an upload and then modified files again on the
# same device and want to add those files to the cloud
self.uploadModifiedFilesToCloud()
def uploadModifiedFilesToCloud(self):
"""
This method first obtain the list of local files whose modification date
is after the last update date stored in the local configuration file.
If this list is not empty, an upload confirmation is asked to the user.
At this stage, the user has several choices: he can confirm the upload,
he can ask to display a more detailed list showing the path of the
modified files or he can decide to update the the last update date stored
in the local configuration file so that the next time the program is
executed, the list of modified files will be different.
If the user confirms the upload, the modified files are uploaded to the
cloud in the cloud dir specific to the project (having the same name
than the project name) and the last update date stored in the local
configuration file is set to now.
In case no files were modified locally, we give the user the possibility
to modify the last synch time. This can be useful if the user wants to
move backward the last synch time in order to upload local files he
modified during the last hours ...
"""
updatedFileNameLst, updatedFilePathNameLst, lastSyncTimeStr = self.fileLister.getModifiedFileLst(
self.projectName)
if updatedFileNameLst != []:
if self.configManager.isProjectSubDirSynchronized(
self.projectName):
questionStr = '^^^ {} files were modified locally after {}\nand will be uploaded to the cloud, keeping the file path information.\nChoose P to display the path or U to update the last sync time'.format(
len(updatedFileNameLst), lastSyncTimeStr)
else:
questionStr = '^^^ {} files were modified locally after {}\nand will be uploaded to the cloud.\nChoose P to display the path or U to update the last sync time, or Enter to select another project'.format(
len(updatedFileNameLst), lastSyncTimeStr)
doUpload, lastSynchTimeChoice = self.requester.getUserConfirmation(
questionStr, updatedFileNameLst, updatedFilePathNameLst)
if doUpload:
print('') # empty line
if self.configManager.isProjectSubDirSynchronized(
self.projectName):
self.pathUploadToCloud(updatedFilePathNameLst)
else:
self.uploadToCloud(updatedFilePathNameLst)
else:
self.handleLastSynchTimeChoice(lastSynchTimeChoice)
else:
# here, neither modified files upload nor cloud files download is adequate. Instead
# of simply closing the utility, we give the user the possibility to update the last
# synch time
questionStr = 'No files modified locally since last sync time {}.\nChoose U to update the last sync time, Enter to loop or quit'.format(
lastSyncTimeStr)
_, lastSynchTimeChoice = self.requester.getUserConfirmation(
questionStr, updatedFileNameLst, updatedFilePathNameLst)
self.handleLastSynchTimeChoice(lastSynchTimeChoice)
def handleLastSynchTimeChoice(self, lastSynchTimeChoice):
if lastSynchTimeChoice == '':
# the user did choose not to upload anything and to leave the last sync
# time unchanged
return
elif lastSynchTimeChoice == 'N':
# the user did choose to update the last sync time to current time (now)
self.updateLastSynchTime()
else:
# the user did enter a last sync time manually
self.updateLastSynchTime(lastSynchTimeChoice)
def uploadToCloud(self, updatedFilePathNameLst):
"""
Physically uploads the files contained in updatedFilePathNameLst to
the cloud and sets the last update date stored in the configuration file
to now. All the files are uploaded in the project cloud root dir.
@param updatedFilePathNameLst: list of file path names to upload
"""
for localFilePathName in updatedFilePathNameLst:
printFileName = localFilePathName.split(sep)[-1]
print('Uploading {} to the cloud ...'.format(printFileName))
try:
self.cloudAccess.uploadFileName(localFilePathName)
except NameError as e:
print(
'\tUploading {} failed. Possible cause: invalid file name ...'
.format(printFileName))
# updating last synch time for the project in config file
self.updateLastSynchTime()
def pathUploadToCloud(self, updatedFilePathNameLst):
"""
Physically uploads the files contained in updatedFilePathNameLst, creating
project sub dirs on the cloud project dir and uploading the files in their
correct sub dir. Then, the method sets the last update date stored in the
configuration file to now.
@param updatedFilePathNameLst: list of file path names to upload
"""
for localFilePathName in updatedFilePathNameLst:
filePathNameElementLst = localFilePathName.split(sep)[-4:]
printFilePathName = sep.join(filePathNameElementLst)
print('Uploading {} to the cloud ...'.format(printFilePathName))
try:
self.cloudAccess.uploadFilePathName(localFilePathName)
except NameError as e:
print(
'\tUploading {} failed. Possible cause: invalid file name ...'
.format(printFilePathName))
# updating last synch time for the project in config file
self.updateLastSynchTime()
def updateLastSynchTime(self, userInpuLlastSynchTimeStr=''):
"""
If the passed lastSynchTimeStr is empty, sets the last update date
stored in the configuration file to now. Else, if the user specified
a synch date, validates it before setting it in the config file.
@param userInpuLlastSynchTimeStr last synch time string as defined
manually by the user
"""
if userInpuLlastSynchTimeStr == '':
# the user choosed to update synch time to Now !
validSynchTimeStr = datetime.now().strftime(
DATE_TIME_FORMAT_CONFIG_FILE)
else:
isValid, validSynchTimeStr = self.validateLastSynchTimeStr(
userInpuLlastSynchTimeStr)
if not isValid:
print(
'\nSynch time format invalid {}. Nothing changed.'.format(
userInpuLlastSynchTimeStr))
return
self.configManager.updateLastSynchTime(self.projectName,
validSynchTimeStr)
print('\nUpdated last synch time to ' + validSynchTimeStr)
def validateLastSynchTimeStr(self, userInputLastSynchTimeStr):
try:
dateTimeMod = datetime.strptime(userInputLastSynchTimeStr,
DATE_TIME_FORMAT_USER_INPUT)
return True, dateTimeMod.strftime(DATE_TIME_FORMAT_CONFIG_FILE)
except ValueError:
try:
dateTimeMod = datetime.strptime(
userInputLastSynchTimeStr,
DATE_TIME_FORMAT_USER_INPUT_SHORT)
return True, dateTimeMod.strftime(DATE_TIME_FORMAT_CONFIG_FILE)
except ValueError:
return False, ''
def downloadAndDeleteFilesFromCloud(self,
downloadPath,
cloudFileLst,
targetName,
doKeepFileOnCloud=False):
"""
Physically downloads the files from the cloud and deletes them from
the cloud.
@param downloadPath: path to which the cloud files will be downloaded,
either the local download dir or directly to the
project dir and sub dirs
@param cloudFileLst: list of files to transfer from the cloud. The list
contains either file names or file path names,
according to the value of the project
synchProjectSubDirStructure parm value as defined
in the configuration file
@param targetName: either 'download' or 'project', according to the value
of the project synchProjectSubDirStructure parm
value as defined
@param doKeepFileOnCloud if True, do not delete files on cloud after
downloading them
"""
for cloudFilePathName in cloudFileLst:
destFilePathName = downloadPath + sep + cloudFilePathName
print('Transferring {} from the cloud {} dir ...'.format(
cloudFilePathName, targetName))
self.cloudAccess.downloadFile(cloudFilePathName, destFilePathName)
if not doKeepFileOnCloud:
self.cloudAccess.deleteFile(cloudFilePathName)
def testUploadModifiedFilesToCloud_noFilePath(self):
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
localProjectDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_2/projectdir'
localProjectDirSaved = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_2/projectdir_saved'
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/test_TransferFiles.ini'
else:
localProjectDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_2\\projectdir'
localProjectDirSaved = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_2\\projectdir_saved'
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\test_TransferFiles.ini'
# cleaning up the target cloud folder
cm = ConfigManager(configFilePathName)
projectName = 'TransferFilesTestProject'
drpa = DropboxAccess(cm, projectName)
cloudFileLst = drpa.getCloudFileNameList()
for file in cloudFileLst:
drpa.deleteFile(file)
self.assertEqual([], drpa.getCloudFileNameList())
# reading and rewriting test project files to update their modification date
tstFileToModifyLst = ['testfilemover_2.py']
pythonFileToModifyLst = ['filemover_2.py', 'filelister_2.py']
docFileToModifyLst = ['doc_21.docx', 'doc_22.docx']
imgFileToModifyLst = ['current_state_21.jpg']
tstFilePathNameToModifyLst = [
localProjectDir + sep + 'test' + sep + x
for x in tstFileToModifyLst
]
pythonFilePathNameToModifyLst = [
localProjectDir + sep + x for x in pythonFileToModifyLst
]
docFilePathNameToModifyLst = [
localProjectDir + sep + 'doc' + sep + x for x in docFileToModifyLst
]
imgFilePathNameToModifyLst = [
localProjectDir + sep + 'images' + sep + x
for x in imgFileToModifyLst
]
filePathNameToModifyLst = tstFilePathNameToModifyLst + pythonFilePathNameToModifyLst + docFilePathNameToModifyLst + imgFilePathNameToModifyLst
for filePathName in filePathNameToModifyLst:
# opening file as readwrite in binary mode
with open(filePathName, 'rb+') as f:
content = f.read()
f.seek(0)
f.write(content)
f.close()
# simulating user input
stdin = sys.stdin
# selecting project 1 (the test project 'TransferFilesTestProject' is
# the first project defined in test_TransferFiles.ini !)
sys.stdin = StringIO('1')
print('\nstdout temporarily captured. Test is running ...')
stdout = sys.stdout
outputCapturingString = StringIO()
sys.stdout = outputCapturingString
# now asking TransferFiles to upload the modified files
tf = TransferFiles(configFilePath=configFilePathName)
# confirming modified files upload
sys.stdin = StringIO('Y')
tf.uploadModifiedFilesToCloud()
sys.stdin = stdin
sys.stdout = stdout
expectedUploadedFileNameLst = tstFileToModifyLst + pythonFileToModifyLst + docFileToModifyLst + imgFileToModifyLst
self.assertEqual(sorted(expectedUploadedFileNameLst),
sorted(drpa.getCloudFileNameList()))
# now restoring the modified files dir to its saved version
dir_util.copy_tree(localProjectDirSaved, localProjectDir)
def testTransferFilesFromCloudToLocalDirs_filePath(self):
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
localProjectDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_2/projectdir'
localProjectDirSaved = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_2/projectdir_saved'
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/test_TransferFiles.ini'
else:
localProjectDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_2\\projectdir'
localProjectDirSaved = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_2\\projectdir_saved'
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\test_TransferFiles.ini'
cm = ConfigManager(configFilePathName)
projectName = 'TransferPathFilesTestProject'
# storing the last synch update time to compare it to the new update
# time once download and move has been performed
storedLastSynchTimeStr = cm.getLastSynchTime(projectName)
storedLastSyncTime = datetime.datetime.strptime(
storedLastSynchTimeStr, DATE_TIME_FORMAT_CONFIG_FILE)
# cleaning up the cloud folder before uploading the test files
drpa = DropboxAccess(cm, projectName)
cloudFileLst = drpa.getCloudFilePathNameList()
for file in cloudFileLst:
drpa.deleteFile(file)
self.assertEqual([], drpa.getCloudFileNameList())
# listing the test files which wiLl be uploaded to
# the cloud in order to be available for download
# and move to local dirs
tstFileToUploadLst = ['testfilemover_2.py']
pythonFileToUploadLst = ['filemover_2.py', 'filelister_2.py']
docFileToUploadLst = ['doc_21.docx', 'doc_22.docx']
imgFileToUploadLst = ['current_state_21.jpg']
fileNameToUploadLst = tstFileToUploadLst + pythonFileToUploadLst + docFileToUploadLst + imgFileToUploadLst
tstFilePathNameToUploadLst = [
localProjectDir + sep + 'test' + sep + x
for x in tstFileToUploadLst
]
pythonFilePathNameToUploadLst = [
localProjectDir + sep + x for x in pythonFileToUploadLst
]
docFilePathNameToUploadLst = [
localProjectDir + sep + 'doc' + sep + x for x in docFileToUploadLst
]
imgFilePathNameToUploadLst = [
localProjectDir + sep + 'images' + sep + x
for x in imgFileToUploadLst
]
filePathNameToUploadLst = tstFilePathNameToUploadLst + pythonFilePathNameToUploadLst + docFilePathNameToUploadLst + imgFilePathNameToUploadLst
# uploading the test files which will then be downloaded and moved to
# local dirs
drpa = DropboxAccess(cm, projectName)
for filePathName in filePathNameToUploadLst:
drpa.uploadFilePathName(filePathName)
# simulating user input
stdin = sys.stdin
# selecting project 2 (the test project 'TransferPathFilesTestProject' is
# the second project defined in test_TransferFiles.ini !)
sys.stdin = StringIO('2') # TransferPathFilesTestProject
print('\nstdout temporarily captured. Test is running ...')
stdout = sys.stdout
outputCapturingString = StringIO()
sys.stdout = outputCapturingString
# now asking TransferFiles to download the cloud files and move them
# to the local dirs
tf = TransferFiles(configFilePath=configFilePathName)
# confirming cloud files download
sys.stdin = StringIO('Y')
tf.transferFilesFromCloudToLocalDirs(drpa.getCloudFilePathNameList())
sys.stdin = stdin
sys.stdout = stdout
# testing that the last synch time is after the stored synch time
cm_reloaded = ConfigManager(configFilePathName)
newLastSynchTimeStr = cm_reloaded.getLastSynchTime(projectName)
newLastSyncTime = datetime.datetime.strptime(
newLastSynchTimeStr, DATE_TIME_FORMAT_CONFIG_FILE)
self.assertTrue(newLastSyncTime > storedLastSyncTime)
# now testing that the files downloaded from the cloud and moved to
# the local dirs are the expected ones
# first, reset the last synch time to the stored one so that FileLister
# will list files whose modification date is oreater than this time
cm.updateLastSynchTime(projectName, storedLastSynchTimeStr)
fl = FileLister(cm)
allFileNameLst, allFilePathNameLst, lastSyncTimeStr = fl.getModifiedFileLst(
projectName)
self.assertEqual(sorted(fileNameToUploadLst), sorted(allFileNameLst))
self.assertEqual(sorted(filePathNameToUploadLst),
sorted(allFilePathNameLst))
# now restoring the modified files dir to its saved version
shutil.rmtree(localProjectDir)
dir_util.copy_tree(localProjectDirSaved, localProjectDir)
def testUploadToCloud_invalid_fileName(self):
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
localProjectDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_2/projectdir'
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/test_TransferFiles.ini'
else:
localProjectDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_2\\projectdir'
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\test_TransferFiles.ini'
# cleaning up the target cloud folder
cm = ConfigManager(configFilePathName)
projectName = 'TransferFilesTestProject'
drpa = DropboxAccess(cm, projectName)
cloudFileLst = drpa.getCloudFilePathNameList()
for file in cloudFileLst:
drpa.deleteFile(file)
self.assertEqual([], drpa.getCloudFilePathNameList())
# reading and rewriting test project files to update their modification date
fileToUploadLst = ['youtube-dl test video \'\'_ä↭𝕐-BaW_jenozKc.m4a']
filePathNameToUploadLst = [
localProjectDir + sep + x for x in fileToUploadLst
]
# simulating user input
stdin = sys.stdin
# selecting project 1 (the test project 'TransferFilesTestProject' is
# the first project defined in test_TransferFiles.ini !)
sys.stdin = StringIO('2')
print('\nstdout temporarily captured. Test is running ...')
stdout = sys.stdout
outputCapturingString = StringIO()
sys.stdout = outputCapturingString
# now asking TransferFiles to upload the modified files
tf = TransferFiles(configFilePath=configFilePathName)
outputCapturingString = StringIO()
sys.stdout = outputCapturingString
tf.uploadToCloud(filePathNameToUploadLst)
sys.stdin = stdin
sys.stdout = stdout
expectedUploadedFilePathNameLst = []
actualUploadedFilePathNameLst = drpa.getCloudFilePathNameList()
self.assertEqual(sorted(expectedUploadedFilePathNameLst),
sorted(actualUploadedFilePathNameLst))
if os.name == 'posix':
self.assertTrue(
'\tUploading youtube-dl test video \'\'_ä↭𝕐-BaW_jenozKc.m4a failed. Possible cause: invalid file name ...'
in outputCapturingString.getvalue())
else:
self.assertTrue(
'\tUploading youtube-dl test video \'\'_ä↭𝕐-BaW_jenozKc.m4a failed. Possible cause: invalid file name ...'
in outputCapturingString.getvalue())
def testPathUploadToCloud(self):
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
localProjectDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_2/projectdir'
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/test_TransferFiles.ini'
else:
localProjectDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_2\\projectdir'
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\test_TransferFiles.ini'
# cleaning up the target cloud folder
cm = ConfigManager(configFilePathName)
projectName = 'TransferFilesTestProject'
drpa = DropboxAccess(cm, projectName)
cloudFileLst = drpa.getCloudFilePathNameList()
for file in cloudFileLst:
drpa.deleteFile(file)
self.assertEqual([], drpa.getCloudFilePathNameList())
# reading and rewriting test project files to update their modification date
tstFileToUploadLst = ['testfilemover_2.py']
pythonFileToUploadLst = ['filemover_2.py', 'filelister_2.py']
docFileToUploadLst = ['doc_21.docx', 'doc_22.docx']
imgFileToUploadLst = ['current_state_21.jpg']
tstFilePathNameToUploadLst = [
localProjectDir + sep + 'test' + sep + x
for x in tstFileToUploadLst
]
pythonFilePathNameToUploadLst = [
localProjectDir + sep + x for x in pythonFileToUploadLst
]
docFilePathNameToUploadLst = [
localProjectDir + sep + 'doc' + sep + x for x in docFileToUploadLst
]
imgFilePathNameToUploadLst = [
localProjectDir + sep + 'images' + sep + x
for x in imgFileToUploadLst
]
filePathNameToUploadLst = tstFilePathNameToUploadLst + pythonFilePathNameToUploadLst + docFilePathNameToUploadLst + imgFilePathNameToUploadLst
# simulating user input
stdin = sys.stdin
# selecting project 1 (the test project 'TransferFilesTestProject' is
# the first project defined in test_TransferFiles.ini !)
sys.stdin = StringIO('1')
print('\nstdout temporarily captured. Test is running ...')
stdout = sys.stdout
outputCapturingString = StringIO()
sys.stdout = outputCapturingString
# now asking TransferFiles to upload the modified files
tf = TransferFiles(configFilePath=configFilePathName)
outputCapturingString = StringIO()
sys.stdout = outputCapturingString
tf.pathUploadToCloud(filePathNameToUploadLst)
sys.stdin = stdin
sys.stdout = stdout
expectedUploadedFilePathNameLst = [
'doc/doc_21.docx', 'doc/doc_22.docx', 'filelister_2.py',
'filemover_2.py', 'images/current_state_21.jpg',
'test/testfilemover_2.py'
]
actualUploadedFilePathNameLst = drpa.getCloudFilePathNameList()
self.assertEqual(sorted(expectedUploadedFilePathNameLst),
sorted(actualUploadedFilePathNameLst))
if os.name == 'posix':
self.assertTrue(
'Uploading testproject_2/projectdir/test/testfilemover_2.py to the cloud ...'
in outputCapturingString.getvalue())
else:
self.assertTrue(
'Uploading testproject_2\projectdir\\test\\testfilemover_2.py to the cloud ...'
in outputCapturingString.getvalue())
def testCreateEmptyFolder(self):
# avoid warning resourcewarning unclosed ssl.sslsocket due to Dropbox
warnings.filterwarnings(action="ignore",
message="unclosed",
category=ResourceWarning)
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/dropbox_access_tst.ini'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\dropbox_access_tst.ini'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudTestProject'
newFolderName = 'newFolder'
# creating a DropboxAccess on an inexisting Dropbox folder
# to ensure the folder does not exist
drpa = DropboxAccess(cm, projectName + '/' + newFolderName)
self.assertRaises(NotADirectoryError, drpa.getCloudFileNameList)
# now, creating the new folder. First recreate a DropboxAccess
# on an existing project folder
drpa = DropboxAccess(cm, projectName)
# then create the new folder and ensure it is accessible
drpa.createProjectSubFolder(newFolderName)
# creating a DropboxAccess on the newly created Dropbox folder
# to ensure the folder now exists
drpa = DropboxAccess(cm, projectName + '/' + newFolderName)
# should not raise any error
drpa.getCloudFileNameList()
# now deleting the newly created folder so that other tests are not
# impacted
drpa = DropboxAccess(cm, projectName)
drpa.deleteProjectSubFolder(newFolderName)
def testUploadAndDeleteFilePathName(self):
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/transfiles.ini'
localDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_3/projectdir'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\transfiles.ini'
localDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_3\\projectdir'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudFilePathNameProject'
# creating a DropboxAccess on an inexisting Dropbox folder
# to ensure the folder does not exist
drpa = DropboxAccess(cm, projectName)
try:
drpa.getCloudFileNameList()
except NotADirectoryError:
# if project folder does not exist
drpa.createProjectFolder()
# should not raise any error
self.assertEqual([], drpa.getCloudFileNameList())
# now, uploading two files, one in the root of project dir, the other
# in a project sub dir
localProjectDir = cm.getProjectLocalDir(projectName)
uploadFileNameProjectRoot = 'filemover_2.py'
localFilePathName = localDir + sep + uploadFileNameProjectRoot
drpa.uploadFilePathName(localFilePathName)
uploadFileNameProjectSubdir = 'test' + sep + 'testfilemover_2.py'
localFilePathName = localDir + sep + uploadFileNameProjectSubdir
drpa.uploadFilePathName(localFilePathName)
uploadFileNameProjectSubdirSlashDirSep = uploadFileNameProjectSubdir.replace(
'\\', '/')
self.assertEqual([
uploadFileNameProjectRoot, uploadFileNameProjectSubdirSlashDirSep
], drpa.getCloudFilePathNameList())
# now deleting the newly created file so that this test can be run again
drpa.deleteFile(uploadFileNameProjectRoot)
drpa.deleteFile(uploadFileNameProjectSubdirSlashDirSep)
# should not raise any error
self.assertEqual([], drpa.getCloudFilePathNameList())
drpa.deleteProjectFolder()
def testUploadSameFileNameTwice(self):
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/dropbox_access_tst.ini'
localDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_1/fromdir_saved'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\dropbox_access_tst.ini'
localDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_1\\fromdir_saved'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudTestProjectForUpload'
# creating a DropboxAccess on an inexisting Dropbox folder
# to ensure the folder does not exist
drpa = DropboxAccess(cm, projectName)
try:
drpa.getCloudFileNameList()
except NotADirectoryError:
# if project folder does not exist
drpa.createProjectFolder()
# should not raise any error
self.assertEqual([], drpa.getCloudFileNameList())
# now, uploading a file
uploadFileName = 'uploadTwice'
localFilePathName = localDir + sep + uploadFileName
drpa.uploadFileName(localFilePathName)
self.assertEqual([uploadFileName], drpa.getCloudFileNameList())
# modifiying the file before uploading it again. Since
# dropbox.files.WriteMode.overwrite is set when calling
# dropbox.files_upload, no WriteConflictError is raised
# when uploading the modified file.
with open(localFilePathName, 'w') as f:
f.write('modified at date {}'.format(
datetime.datetime.now().strftime(
DATE_TIME_FORMAT_CONFIG_FILE)))
f.close()
drpa.uploadFileName(localFilePathName)
self.assertEqual([uploadFileName], drpa.getCloudFileNameList())
# now deleting the newly created file so that this test can be run again
drpa.deleteFile(uploadFileName)
# should not raise any error
self.assertEqual([], drpa.getCloudFileNameList())
def testUploadAndDeleteFileName(self):
if os.name == 'posix':
configFilePathName = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/dropbox_access_tst.ini'
localDir = '/storage/emulated/0/Android/data/ru.iiec.pydroid3/files/trans_file_cloud/test/testproject_1/fromdir_saved'
else:
configFilePathName = 'D:\\Development\\Python\\trans_file_cloud\\test\\dropbox_access_tst.ini'
localDir = 'D:\\Development\\Python\\trans_file_cloud\\test\\testproject_1\\fromdir_saved'
cm = ConfigManager(configFilePathName)
projectName = 'transFileCloudTestProjectForUpload'
# creating a DropboxAccess on an inexisting Dropbox folder
# to ensure the folder does not exist
drpa = DropboxAccess(cm, projectName)
try:
drpa.getCloudFileNameList()
except NotADirectoryError:
# if project folder does not exist
drpa.createProjectFolder()
# should not raise any error
self.assertEqual([], drpa.getCloudFileNameList())
# now, uploading a file
uploadFileName = 'filemover_1.py'
localFilePathName = localDir + sep + uploadFileName
drpa.uploadFileName(localFilePathName)
self.assertEqual([uploadFileName], drpa.getCloudFileNameList())
# now deleting the newly created file so that this test can be run again
drpa.deleteFile(uploadFileName)
# should not raise any error
self.assertEqual([], drpa.getCloudFileNameList())