def __init__(self, parent):
super(CharacterDialog, self).__init__(parent)
self.setWindowTitle(_("KeepKey Seed Recovery"))
self.character_pos = 0
self.word_pos = 0
self.loop = QEventLoop()
self.word_help = QLabel()
self.char_buttons = []
vbox = QVBoxLayout(self)
vbox.addWidget(WWLabel(CHARACTER_RECOVERY))
hbox = QHBoxLayout()
hbox.addWidget(self.word_help)
for i in range(4):
char_button = CharacterButton('*')
char_button.setMaximumWidth(36)
self.char_buttons.append(char_button)
hbox.addWidget(char_button)
self.accept_button = CharacterButton(_("Accept Word"))
self.accept_button.clicked.connect(partial(self.process_key, 32))
self.rejected.connect(partial(self.loop.exit, 1))
hbox.addWidget(self.accept_button)
hbox.addStretch(1)
vbox.addLayout(hbox)
self.finished_button = QPushButton(_("Seed Entered"))
self.cancel_button = QPushButton(_("Cancel"))
self.finished_button.clicked.connect(
partial(self.process_key, Qt.Key_Return))
self.cancel_button.clicked.connect(self.rejected)
buttons = Buttons(self.finished_button, self.cancel_button)
vbox.addSpacing(40)
vbox.addLayout(buttons)
self.refresh()
self.show()
def __init__(self, parent):
super(MatrixDialog, self).__init__(parent)
self.setWindowTitle(_("Trezor Matrix Recovery"))
self.num = 9
self.loop = QEventLoop()
vbox = QVBoxLayout(self)
vbox.addWidget(WWLabel(MATRIX_RECOVERY))
grid = QGridLayout()
grid.setSpacing(0)
self.char_buttons = []
for y in range(3):
for x in range(3):
button = QPushButton('?')
button.clicked.connect(
partial(self.process_key,
ord('1') + y * 3 + x))
grid.addWidget(button, 3 - y, x)
self.char_buttons.append(button)
vbox.addLayout(grid)
self.backspace_button = QPushButton("<=")
self.backspace_button.clicked.connect(
partial(self.process_key, Qt.Key_Backspace))
self.cancel_button = QPushButton(_("Cancel"))
self.cancel_button.clicked.connect(
partial(self.process_key, Qt.Key_Escape))
buttons = Buttons(self.backspace_button, self.cancel_button)
vbox.addSpacing(40)
vbox.addLayout(buttons)
self.refresh()
self.show()
def cypherseed_dialog(self, window):
self.warn_old_revealer()
d = WindowModalDialog(window, "Encryption Dialog")
d.setMinimumWidth(500)
d.setMinimumHeight(210)
d.setMaximumHeight(450)
d.setContentsMargins(11, 11, 1, 1)
self.c_dialog = d
hbox = QHBoxLayout(d)
self.vbox = QVBoxLayout()
logo = QLabel()
hbox.addWidget(logo)
logo.setPixmap(QPixmap(':icons/revealer.png'))
logo.setAlignment(Qt.AlignLeft)
hbox.addSpacing(16)
self.vbox.addWidget(
WWLabel("<b>" + _("Revealer Secret Backup Plugin") + "</b><br>" +
_("Ready to encrypt for revealer {}").format(
self.versioned_seed.version + '_' +
self.versioned_seed.checksum)))
self.vbox.addSpacing(11)
hbox.addLayout(self.vbox)
grid = QGridLayout()
self.vbox.addLayout(grid)
cprint = QPushButton(_("Encrypt {}'s seed").format(self.wallet_name))
cprint.setMaximumWidth(250)
cprint.clicked.connect(partial(self.seed_img, True))
self.vbox.addWidget(cprint)
self.vbox.addSpacing(1)
self.vbox.addWidget(
WWLabel("<b>" + _("OR") + "</b> " +
_("type a custom alphanumerical secret below:")))
self.text = ScanQRTextEdit()
self.text.setTabChangesFocus(True)
self.text.setMaximumHeight(70)
self.text.textChanged.connect(self.customtxt_limits)
self.vbox.addWidget(self.text)
self.char_count = WWLabel("")
self.char_count.setAlignment(Qt.AlignRight)
self.vbox.addWidget(self.char_count)
self.max_chars = WWLabel(
"<font color='red'>" +
_("This version supports a maximum of {} characters.").format(
self.MAX_PLAINTEXT_LEN) + "</font>")
self.vbox.addWidget(self.max_chars)
self.max_chars.setVisible(False)
self.ctext = QPushButton(_("Encrypt custom secret"))
self.ctext.clicked.connect(self.t)
self.vbox.addWidget(self.ctext)
self.ctext.setEnabled(False)
self.vbox.addSpacing(11)
self.vbox.addLayout(Buttons(CloseButton(d)))
return bool(d.exec_())
def message_dialog(self, msg, on_cancel):
# Called more than once during signing, to confirm output and fee
self.clear_dialog()
title = _('Please check your {} device').format(self.device)
self.dialog = dialog = WindowModalDialog(self.top_level_window(), title)
l = QLabel(msg)
vbox = QVBoxLayout(dialog)
vbox.addWidget(l)
if on_cancel:
dialog.rejected.connect(on_cancel)
vbox.addLayout(Buttons(CancelButton(dialog)))
dialog.show()
def pin_dialog(self, msg):
# Needed e.g. when resetting a device
self.clear_dialog()
dialog = WindowModalDialog(self.top_level_window(), _("Enter PIN"))
matrix = self.pin_matrix_widget_class()
vbox = QVBoxLayout()
vbox.addWidget(QLabel(msg))
vbox.addWidget(matrix)
vbox.addLayout(Buttons(CancelButton(dialog), OkButton(dialog)))
dialog.setLayout(vbox)
dialog.exec_()
self.response = str(matrix.get_value())
self.done.set()
def passphrase_dialog(self, msg, confirm):
# If confirm is true, require the user to enter the passphrase twice
parent = self.top_level_window()
d = WindowModalDialog(parent, _("Enter Passphrase"))
if confirm:
OK_button = OkButton(d)
playout = PasswordLayout(msg=msg, kind=PW_PASSPHRASE, OK_button=OK_button)
vbox = QVBoxLayout()
vbox.addLayout(playout.layout())
vbox.addLayout(Buttons(CancelButton(d), OK_button))
d.setLayout(vbox)
passphrase = playout.new_password() if d.exec_() else None
else:
pw = QLineEdit()
pw.setEchoMode(2)
pw.setMinimumWidth(200)
vbox = QVBoxLayout()
vbox.addWidget(WWLabel(msg))
vbox.addWidget(pw)
vbox.addLayout(Buttons(CancelButton(d), OkButton(d)))
d.setLayout(vbox)
passphrase = pw.text() if d.exec_() else None
self.passphrase = passphrase
self.done.set()
def calibration_dialog(self, window):
d = WindowModalDialog(window,
_("Revealer - Printer calibration settings"))
d.setMinimumSize(100, 200)
vbox = QVBoxLayout(d)
vbox.addWidget(
QLabel(''.join([
"<br/>",
_("If you have an old printer, or want optimal precision"),
"<br/>",
_("print the calibration pdf and follow the instructions "),
"<br/>",
"<br/>",
])))
self.calibration_h = self.config.get('calibration_h')
self.calibration_v = self.config.get('calibration_v')
cprint = QPushButton(_("Open calibration pdf"))
cprint.clicked.connect(self.calibration)
vbox.addWidget(cprint)
vbox.addWidget(QLabel(_('Calibration values:')))
grid = QGridLayout()
vbox.addLayout(grid)
grid.addWidget(QLabel(_('Right side')), 0, 0)
horizontal = QLineEdit()
horizontal.setText(str(self.calibration_h))
grid.addWidget(horizontal, 0, 1)
grid.addWidget(QLabel(_('Bottom')), 1, 0)
vertical = QLineEdit()
vertical.setText(str(self.calibration_v))
grid.addWidget(vertical, 1, 1)
vbox.addStretch()
vbox.addSpacing(13)
vbox.addLayout(Buttons(CloseButton(d), OkButton(d)))
if not d.exec_():
return
self.calibration_h = int(Decimal(horizontal.text()))
self.config.set_key('calibration_h', self.calibration_h)
self.calibration_v = int(Decimal(vertical.text()))
self.config.set_key('calibration_v', self.calibration_v)
def auth_dialog(self, window):
d = WindowModalDialog(window, _("Authorization"))
vbox = QVBoxLayout(d)
pw = AmountEdit(None, is_int=True)
msg = _('Please enter your Google Authenticator code')
vbox.addWidget(QLabel(msg))
grid = QGridLayout()
grid.setSpacing(8)
grid.addWidget(QLabel(_('Code')), 1, 0)
grid.addWidget(pw, 1, 1)
vbox.addLayout(grid)
msg = _(
'If you have lost your second factor, you need to restore your wallet from seed in order to request a new code.'
)
label = QLabel(msg)
label.setWordWrap(1)
vbox.addWidget(label)
vbox.addLayout(Buttons(CancelButton(d), OkButton(d)))
if not d.exec_():
return
return pw.get_amount()
def settings_dialog(self, window):
wallet = window.parent().wallet
d = WindowModalDialog(window, _("Label Settings"))
hbox = QHBoxLayout()
hbox.addWidget(QLabel("Label sync options:"))
upload = ThreadedButton("Force upload", partial(self.push, wallet),
partial(self.done_processing_success, d),
partial(self.done_processing_error, d))
download = ThreadedButton("Force download",
partial(self.pull, wallet, True),
partial(self.done_processing_success, d),
partial(self.done_processing_error, d))
vbox = QVBoxLayout()
vbox.addWidget(upload)
vbox.addWidget(download)
hbox.addLayout(vbox)
vbox = QVBoxLayout(d)
vbox.addLayout(hbox)
vbox.addSpacing(20)
vbox.addLayout(Buttons(OkButton(d)))
return bool(d.exec_())
def __init__(self, window, plugin, keystore, device_id):
title = _("{} Settings").format(plugin.device)
super(SettingsDialog, self).__init__(window, title)
self.setMaximumWidth(540)
devmgr = plugin.device_manager()
config = devmgr.config
handler = keystore.handler
thread = keystore.thread
def invoke_client(method, *args, **kw_args):
unpair_after = kw_args.pop('unpair_after', False)
def task():
client = devmgr.client_by_id(device_id)
if not client:
raise RuntimeError("Device not connected")
if method:
getattr(client, method)(*args, **kw_args)
if unpair_after:
devmgr.unpair_id(device_id)
return client.features
thread.add(task, on_success=update)
def update(features):
self.features = features
set_label_enabled()
bl_hash = bh2u(features.bootloader_hash)
bl_hash = "\n".join([bl_hash[:32], bl_hash[32:]])
noyes = [_("No"), _("Yes")]
endis = [_("Enable Passphrases"), _("Disable Passphrases")]
disen = [_("Disabled"), _("Enabled")]
setchange = [_("Set a PIN"), _("Change PIN")]
version = "%d.%d.%d" % (features.major_version,
features.minor_version,
features.patch_version)
coins = ", ".join(coin.coin_name for coin in features.coins)
device_label.setText(features.label)
pin_set_label.setText(noyes[features.pin_protection])
passphrases_label.setText(disen[features.passphrase_protection])
bl_hash_label.setText(bl_hash)
label_edit.setText(features.label)
device_id_label.setText(features.device_id)
initialized_label.setText(noyes[features.initialized])
version_label.setText(version)
coins_label.setText(coins)
clear_pin_button.setVisible(features.pin_protection)
clear_pin_warning.setVisible(features.pin_protection)
pin_button.setText(setchange[features.pin_protection])
pin_msg.setVisible(not features.pin_protection)
passphrase_button.setText(endis[features.passphrase_protection])
language_label.setText(features.language)
def set_label_enabled():
label_apply.setEnabled(label_edit.text() != self.features.label)
def rename():
invoke_client('change_label', label_edit.text())
def toggle_passphrase():
title = _("Confirm Toggle Passphrase Protection")
currently_enabled = self.features.passphrase_protection
if currently_enabled:
msg = _("After disabling passphrases, you can only pair this "
"Electrum wallet if it had an empty passphrase. "
"If its passphrase was not empty, you will need to "
"create a new wallet with the install wizard. You "
"can use this wallet again at any time by re-enabling "
"passphrases and entering its passphrase.")
else:
msg = _("Your current Electrum wallet can only be used with "
"an empty passphrase. You must create a separate "
"wallet with the install wizard for other passphrases "
"as each one generates a new set of addresses.")
msg += "\n\n" + _("Are you sure you want to proceed?")
if not self.question(msg, title=title):
return
invoke_client('toggle_passphrase', unpair_after=currently_enabled)
def set_pin():
invoke_client('set_pin', remove=False)
def clear_pin():
invoke_client('set_pin', remove=True)
def wipe_device():
wallet = window.wallet
if wallet and sum(wallet.get_balance()):
title = _("Confirm Device Wipe")
msg = _("Are you SURE you want to wipe the device?\n"
"Your wallet still has AUDAXs in it!")
if not self.question(
msg, title=title, icon=QMessageBox.Critical):
return
invoke_client('wipe_device', unpair_after=True)
def slider_moved():
mins = timeout_slider.sliderPosition()
timeout_minutes.setText(_("{:2d} minutes").format(mins))
def slider_released():
config.set_session_timeout(timeout_slider.sliderPosition() * 60)
# Information tab
info_tab = QWidget()
info_layout = QVBoxLayout(info_tab)
info_glayout = QGridLayout()
info_glayout.setColumnStretch(2, 1)
device_label = QLabel()
pin_set_label = QLabel()
passphrases_label = QLabel()
version_label = QLabel()
device_id_label = QLabel()
bl_hash_label = QLabel()
bl_hash_label.setWordWrap(True)
coins_label = QLabel()
coins_label.setWordWrap(True)
language_label = QLabel()
initialized_label = QLabel()
rows = [
(_("Device Label"), device_label),
(_("PIN set"), pin_set_label),
(_("Passphrases"), passphrases_label),
(_("Firmware Version"), version_label),
(_("Device ID"), device_id_label),
(_("Bootloader Hash"), bl_hash_label),
(_("Supported Coins"), coins_label),
(_("Language"), language_label),
(_("Initialized"), initialized_label),
]
for row_num, (label, widget) in enumerate(rows):
info_glayout.addWidget(QLabel(label), row_num, 0)
info_glayout.addWidget(widget, row_num, 1)
info_layout.addLayout(info_glayout)
# Settings tab
settings_tab = QWidget()
settings_layout = QVBoxLayout(settings_tab)
settings_glayout = QGridLayout()
# Settings tab - Label
label_msg = QLabel(
_("Name this {}. If you have multiple devices "
"their labels help distinguish them.").format(plugin.device))
label_msg.setWordWrap(True)
label_label = QLabel(_("Device Label"))
label_edit = QLineEdit()
label_edit.setMinimumWidth(150)
label_edit.setMaxLength(plugin.MAX_LABEL_LEN)
label_apply = QPushButton(_("Apply"))
label_apply.clicked.connect(rename)
label_edit.textChanged.connect(set_label_enabled)
settings_glayout.addWidget(label_label, 0, 0)
settings_glayout.addWidget(label_edit, 0, 1, 1, 2)
settings_glayout.addWidget(label_apply, 0, 3)
settings_glayout.addWidget(label_msg, 1, 1, 1, -1)
# Settings tab - PIN
pin_label = QLabel(_("PIN Protection"))
pin_button = QPushButton()
pin_button.clicked.connect(set_pin)
settings_glayout.addWidget(pin_label, 2, 0)
settings_glayout.addWidget(pin_button, 2, 1)
pin_msg = QLabel(
_("PIN protection is strongly recommended. "
"A PIN is your only protection against someone "
"stealing your AUDAXs if they obtain physical "
"access to your {}.").format(plugin.device))
pin_msg.setWordWrap(True)
pin_msg.setStyleSheet("color: red")
settings_glayout.addWidget(pin_msg, 3, 1, 1, -1)
# Settings tab - Session Timeout
timeout_label = QLabel(_("Session Timeout"))
timeout_minutes = QLabel()
timeout_slider = QSlider(Qt.Horizontal)
timeout_slider.setRange(1, 60)
timeout_slider.setSingleStep(1)
timeout_slider.setTickInterval(5)
timeout_slider.setTickPosition(QSlider.TicksBelow)
timeout_slider.setTracking(True)
timeout_msg = QLabel(
_("Clear the session after the specified period "
"of inactivity. Once a session has timed out, "
"your PIN and passphrase (if enabled) must be "
"re-entered to use the device."))
timeout_msg.setWordWrap(True)
timeout_slider.setSliderPosition(config.get_session_timeout() // 60)
slider_moved()
timeout_slider.valueChanged.connect(slider_moved)
timeout_slider.sliderReleased.connect(slider_released)
settings_glayout.addWidget(timeout_label, 6, 0)
settings_glayout.addWidget(timeout_slider, 6, 1, 1, 3)
settings_glayout.addWidget(timeout_minutes, 6, 4)
settings_glayout.addWidget(timeout_msg, 7, 1, 1, -1)
settings_layout.addLayout(settings_glayout)
settings_layout.addStretch(1)
# Advanced tab
advanced_tab = QWidget()
advanced_layout = QVBoxLayout(advanced_tab)
advanced_glayout = QGridLayout()
# Advanced tab - clear PIN
clear_pin_button = QPushButton(_("Disable PIN"))
clear_pin_button.clicked.connect(clear_pin)
clear_pin_warning = QLabel(
_("If you disable your PIN, anyone with physical access to your "
"{} device can spend your AUDAXs.").format(plugin.device))
clear_pin_warning.setWordWrap(True)
clear_pin_warning.setStyleSheet("color: red")
advanced_glayout.addWidget(clear_pin_button, 0, 2)
advanced_glayout.addWidget(clear_pin_warning, 1, 0, 1, 5)
# Advanced tab - toggle passphrase protection
passphrase_button = QPushButton()
passphrase_button.clicked.connect(toggle_passphrase)
passphrase_msg = WWLabel(PASSPHRASE_HELP)
passphrase_warning = WWLabel(PASSPHRASE_NOT_PIN)
passphrase_warning.setStyleSheet("color: red")
advanced_glayout.addWidget(passphrase_button, 3, 2)
advanced_glayout.addWidget(passphrase_msg, 4, 0, 1, 5)
advanced_glayout.addWidget(passphrase_warning, 5, 0, 1, 5)
# Advanced tab - wipe device
wipe_device_button = QPushButton(_("Wipe Device"))
wipe_device_button.clicked.connect(wipe_device)
wipe_device_msg = QLabel(
_("Wipe the device, removing all data from it. The firmware "
"is left unchanged."))
wipe_device_msg.setWordWrap(True)
wipe_device_warning = QLabel(
_("Only wipe a device if you have the recovery seed written down "
"and the device wallet(s) are empty, otherwise the AUDAXs "
"will be lost forever."))
wipe_device_warning.setWordWrap(True)
wipe_device_warning.setStyleSheet("color: red")
advanced_glayout.addWidget(wipe_device_button, 6, 2)
advanced_glayout.addWidget(wipe_device_msg, 7, 0, 1, 5)
advanced_glayout.addWidget(wipe_device_warning, 8, 0, 1, 5)
advanced_layout.addLayout(advanced_glayout)
advanced_layout.addStretch(1)
tabs = QTabWidget(self)
tabs.addTab(info_tab, _("Information"))
tabs.addTab(settings_tab, _("Settings"))
tabs.addTab(advanced_tab, _("Advanced"))
dialog_vbox = QVBoxLayout(self)
dialog_vbox.addWidget(tabs)
dialog_vbox.addLayout(Buttons(CloseButton(self)))
# Update information
invoke_client(None)
def show_settings_dialog(self, window, success):
if not success:
window.show_message(_('Server not reachable.'))
return
wallet = window.wallet
d = WindowModalDialog(window, _("TrustedCoin Information"))
d.setMinimumSize(500, 200)
vbox = QVBoxLayout(d)
hbox = QHBoxLayout()
logo = QLabel()
logo.setPixmap(QPixmap(":icons/trustedcoin-status.png"))
msg = _('This wallet is protected by TrustedCoin\'s two-factor authentication.') + '<br/>'\
+ _("For more information, visit") + " <a href=\"https://api.trustedcoin.com/#/electrum-help\">https://api.trustedcoin.com/#/electrum-help</a>"
label = QLabel(msg)
label.setOpenExternalLinks(1)
hbox.addStretch(10)
hbox.addWidget(logo)
hbox.addStretch(10)
hbox.addWidget(label)
hbox.addStretch(10)
vbox.addLayout(hbox)
vbox.addStretch(10)
msg = _(
'TrustedCoin charges a small fee to co-sign transactions. The fee depends on how many prepaid transactions you buy. An extra output is added to your transaction every time you run out of prepaid transactions.'
) + '<br/>'
label = QLabel(msg)
label.setWordWrap(1)
vbox.addWidget(label)
vbox.addStretch(10)
grid = QGridLayout()
vbox.addLayout(grid)
price_per_tx = wallet.price_per_tx
n_prepay = wallet.num_prepay(self.config)
i = 0
for k, v in sorted(price_per_tx.items()):
if k == 1:
continue
grid.addWidget(QLabel("Pay every %d transactions:" % k), i, 0)
grid.addWidget(
QLabel(
window.format_amount(v / k) + ' ' + window.base_unit() +
"/tx"), i, 1)
b = QRadioButton()
b.setChecked(k == n_prepay)
b.clicked.connect(lambda b, k=k: self.config.set_key(
'trustedcoin_prepay', k, True))
grid.addWidget(b, i, 2)
i += 1
n = wallet.billing_info.get('tx_remaining', 0)
grid.addWidget(
QLabel(_("Your wallet has {} prepaid transactions.").format(n)), i,
0)
vbox.addLayout(Buttons(CloseButton(d)))
d.exec_()
def setup_dialog(self, window):
self.wallet = window.parent().wallet
self.update_wallet_name(self.wallet)
self.user_input = False
self.d = WindowModalDialog(window, "Setup Dialog")
self.d.setMinimumWidth(500)
self.d.setMinimumHeight(210)
self.d.setMaximumHeight(320)
self.d.setContentsMargins(11, 11, 1, 1)
self.hbox = QHBoxLayout(self.d)
vbox = QVBoxLayout()
logo = QLabel()
self.hbox.addWidget(logo)
logo.setPixmap(QPixmap(':icons/revealer.png'))
logo.setAlignment(Qt.AlignLeft)
self.hbox.addSpacing(16)
vbox.addWidget(
WWLabel(
"<b>" + _("Revealer Secret Backup Plugin") + "</b><br>" +
_("To encrypt your backup, first we need to load some noise.")
+ "<br/>"))
vbox.addSpacing(7)
bcreate = QPushButton(_("Create a new Revealer"))
bcreate.setMaximumWidth(181)
bcreate.setDefault(True)
vbox.addWidget(bcreate, Qt.AlignCenter)
self.load_noise = ScanQRTextEdit()
self.load_noise.setTabChangesFocus(True)
self.load_noise.textChanged.connect(self.on_edit)
self.load_noise.setMaximumHeight(33)
self.hbox.addLayout(vbox)
vbox.addWidget(
WWLabel(
_("or type an existing revealer code below and click 'next':"))
)
vbox.addWidget(self.load_noise)
vbox.addSpacing(3)
self.next_button = QPushButton(_("Next"), self.d)
self.next_button.setEnabled(False)
vbox.addLayout(Buttons(self.next_button))
self.next_button.clicked.connect(self.d.close)
self.next_button.clicked.connect(
partial(self.cypherseed_dialog, window))
vbox.addWidget(
QLabel("<b>" + _("Warning") + "</b>: " + _(
"Each revealer should be used only once."
) + "<br>" + _(
"more information at <a href=\"https://revealer.cc/faq\">https://revealer.cc/faq</a>"
)))
def mk_digital():
try:
self.make_digital(self.d)
except Exception:
self.logger.exception('')
else:
self.cypherseed_dialog(window)
bcreate.clicked.connect(mk_digital)
return bool(self.d.exec_())