def test_trivial_possibilities():
"""
Tests that a single reasonable option is correctly generated in a
trivial case.
"""
infra = InfrastructureNetwork()
# Two nodes, 1m apart. The transmitting node has a
# transmit_power_dbm
# power of 30dBm (similar to a regular router) which should easily
# cover the distance of 1m without any noise.
source_node = infra.add_source(pos=(0, 0), transmit_power_dbm=0.1)
infra.set_sink(pos=(1, 0), transmit_power_dbm=0)
overlay = OverlayNetwork()
source_block = overlay.add_source()
sink_block = overlay.set_sink()
overlay.add_link(source_block, sink_block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(source_block, source_node)]
)
# can only embed B2 into N2
assert len(embedding.possibilities()) == 1
def test_path_loss():
"""
Tests that an embedding over impossible distances is recognized as
invalid.
"""
infra = InfrastructureNetwork()
# Two nodes, 1km apart. The transmitting node has a transmission
# power of 1dBm (=1.26mW). With a path loss over 1km of *at least*
# 30dBm, less than ~-30dBm (approx. 10^-3 = 0.001mW = 1uW) arrives
# at the target. That is a very optimistic approximation and is not
# nearly enough to send any reasonable signal.
source_node = infra.add_source(pos=(0, 0), transmit_power_dbm=1)
infra.set_sink(pos=(1000, 0), transmit_power_dbm=0)
overlay = OverlayNetwork()
source_block = overlay.add_source()
sink_block = overlay.set_sink()
overlay.add_link(source_block, sink_block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(source_block, source_node)]
)
assert len(embedding.possibilities()) == 0
def test_self_loop_does_not_interfere():
"""Tests self-loop does not interfere with other connections"""
infra = InfrastructureNetwork()
nso1 = infra.add_source(name="nso1", pos=(0, 0), transmit_power_dbm=30)
nso2 = infra.add_source(name="nso2", pos=(0, 1), transmit_power_dbm=30)
nsi = infra.set_sink(name="nsi", pos=(2, 0), transmit_power_dbm=30)
overlay = OverlayNetwork()
bso1 = overlay.add_source(name="bso1", datarate=5, requirement=0)
bso2 = overlay.add_source(name="bso2", datarate=5, requirement=0)
bin_ = overlay.add_intermediate(name="bin", datarate=5, requirement=0)
bsi = overlay.set_sink(name="bsi", datarate=5, requirement=0)
overlay.add_link(bso1, bin_)
overlay.add_link(bin_, bsi)
overlay.add_link(bso2, bsi)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(bso1, nso1), (bso2, nso2)]
)
eso1 = ENode(bso1, nso1)
eso2 = ENode(bso2, nso2)
ein = ENode(bin_, nsi)
esi = ENode(bsi, nsi)
assert embedding.take_action(eso1, ein, 0)
# self loop at node esi, ts 1
assert embedding.take_action(ein, esi, 1)
# can still send to that node at the same ts
assert embedding.take_action(eso2, esi, 1)
def test_non_broadcast_parallel_communications_impossible():
"""Tests that non-broadcast parallel communications *do* affect the
SINR."""
infra = InfrastructureNetwork()
nso1 = infra.add_source(pos=(1, 0), transmit_power_dbm=30, name="nso1")
nso2 = infra.add_source(pos=(-1, 0), transmit_power_dbm=30, name="nso2")
nin = infra.add_intermediate(pos=(1, 0), transmit_power_dbm=30, name="nin")
nsi = infra.set_sink(pos=(2, 0), transmit_power_dbm=30, name="nsi")
overlay = OverlayNetwork()
bso1 = overlay.add_source(name="bso1")
bso2 = overlay.add_source(name="bso2")
bsi = overlay.set_sink(name="bsi")
overlay.add_link(bso1, bsi)
overlay.add_link(bso2, bsi)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(bso1, nso1), (bso2, nso2)]
)
# both sources use nin as a relay
eso1 = ENode(bso1, nso1)
eso2 = ENode(bso2, nso2)
esi = ENode(bsi, nsi)
ein1 = ENode(bso1, nin, bsi)
ein2 = ENode(bso2, nin, bsi)
assert embedding.take_action(eso1, ein1, 0)
assert embedding.take_action(eso2, ein2, 1)
assert embedding.take_action(ein1, esi, 2)
assert (ein2, esi, 2) not in embedding.possibilities()
def test_link_edges_cannot_be_embedded_twice():
"""Tests that edges completing a link that is already embedded are
removed or not even added when creating a new timestep"""
infra = InfrastructureNetwork()
nso = infra.add_source(pos=(0, 0), transmit_power_dbm=30, name="nso")
nsi = infra.set_sink(pos=(2, 0), transmit_power_dbm=30, name="nsi")
_nint = infra.add_intermediate(
pos=(1, -1), transmit_power_dbm=30, name="nint"
)
overlay = OverlayNetwork()
bso = overlay.add_source(name="bso")
bsi = overlay.set_sink(name="bsi")
bint = overlay.add_intermediate(name="bint")
overlay.add_link(bso, bsi)
overlay.add_link(bso, bint)
overlay.add_link(bint, bsi)
embedding = PartialEmbedding(infra, overlay, source_mapping=[(bso, nso)])
eso = ENode(bso, nso)
esi = ENode(bsi, nsi)
# now the link from source to sink is already embedded, only the one
# from source to intermediate should be left
assert embedding.take_action(eso, esi, 0)
# so embedding it again should not be possible
assert not embedding.take_action(ENode(bso, nso), ENode(bsi, nsi), 1)
def test_relay_circles_impossible():
"""Tests that each relay node can be taken at most once in a
path"""
infra = InfrastructureNetwork()
N2 = infra.add_source(name="N2", pos=(4.8, 5.7), transmit_power_dbm=29.7)
N4 = infra.add_intermediate(
name="N4", pos=(4.7, 8.8), transmit_power_dbm=13.4
)
_N1 = infra.set_sink(name="N1", pos=(7.7, 5.2), transmit_power_dbm=22.9)
overlay = OverlayNetwork()
B2 = overlay.add_source(name="B2", requirement=0, datarate=0)
_B5 = overlay.add_intermediate(name="B5", requirement=0, datarate=0)
B4 = overlay.add_intermediate(name="B4", requirement=0, datarate=0)
B1 = overlay.set_sink(name="B1", requirement=0, datarate=0)
overlay.add_link(B2, B4)
overlay.add_link(B4, B1)
embedding = PartialEmbedding(infra, overlay, source_mapping=[(B2, N2)])
eso = ENode(B2, N2)
ein1 = ENode(B2, N4, B4)
ein2 = ENode(B2, N2, B4)
assert embedding.take_action(eso, ein1, 0)
# n2 was already visited, circle
assert not embedding.take_action(ein1, ein2, 1)
def test_parallel_receive_impossible():
"""
Tests that receiving from two sender nodes at the same time is
impossible
"""
infra = InfrastructureNetwork()
nsource1 = infra.add_source(pos=(0, 0), transmit_power_dbm=30)
nsource2 = infra.add_source(pos=(3, 0), transmit_power_dbm=30)
nsink = infra.set_sink(pos=(2, 0), transmit_power_dbm=30)
overlay = OverlayNetwork()
esource1 = ENode(overlay.add_source(), nsource1)
esource2 = ENode(overlay.add_source(), nsource2)
esink = ENode(overlay.set_sink(), nsink)
# two incoming connections to sink
overlay.add_link(esource1.block, esink.block)
overlay.add_link(esource2.block, esink.block)
embedding = PartialEmbedding(
infra,
overlay,
source_mapping=[
(esource1.block, esource1.node),
(esource2.block, esource2.node),
],
)
# Try to send two signals to sink at the same timeslot. This should
# fail, as either one signal should overshadow the other.
embedding.take_action(esource1, esink, 0)
assert not embedding.take_action(esource2, esink, 0)
def test_block_capacity():
"""Tests that per-node capacity is respected for each timeslot"""
infra = InfrastructureNetwork()
nso = infra.add_source(pos=(0, 0), transmit_power_dbm=30, name="nso")
nin1 = infra.add_intermediate(
pos=(-1, 1), transmit_power_dbm=30, capacity=42, name="nin1"
)
nin2 = infra.add_intermediate(
pos=(1, 1), transmit_power_dbm=30, capacity=5, name="nin2"
)
_nsi = infra.set_sink(pos=(0, 1), transmit_power_dbm=30, name="nsi")
overlay = OverlayNetwork()
# ignore sinr constraints -> 0 datarate requirements
bso = overlay.add_source(name="bso", datarate=0)
bin1 = overlay.add_intermediate(requirement=40, name="bin1", datarate=0)
bin2 = overlay.add_intermediate(requirement=5, name="bin2", datarate=0)
bsi = overlay.set_sink(name="bsi", datarate=0)
overlay.add_link(bso, bin1)
overlay.add_link(bso, bin2)
overlay.add_link(bin1, bsi)
overlay.add_link(bin2, bsi)
embedding = PartialEmbedding(infra, overlay, source_mapping=[(bso, nso)])
eso = ENode(bso, nso)
possibilities = embedding.possibilities()
# bin1 can be embedded in nin1, because 42>=40
assert (eso, ENode(bin1, nin1), 0) in possibilities
# but not in nin2 because it does not have enough capacity
assert (eso, ENode(bin1, nin2), 0) not in possibilities
# bin2 has less requirements and can be embedded in either one
assert (eso, ENode(bin2, nin1), 0) in possibilities
assert (eso, ENode(bin2, nin2), 0) in possibilities
# embed bin1 in nin1
assert embedding.take_action(ENode(bso, nso), ENode(bin1, nin1), 0)
possibilities = embedding.possibilities()
# pylint:disable=protected-access
# The easiest way to test this, not too hard to adjust when
# internals change.
assert embedding._capacity_used[nin1] == 40
# which means bin2 can no longer be embedded in it
assert (eso, ENode(bin2, nin1), 0) not in possibilities
# while it can still be embedded in nin2
assert (eso, ENode(bin2, nin2), 0) in possibilities
def test_all_viable_options_offered():
"""
Tests that all manually verified options are offered in a concrete
example.
"""
infra = InfrastructureNetwork()
# Two sources, one sink, one intermediate, one relay
# Enough transmit power so that it doesn't need to be taken into account
nso1 = infra.add_source(
pos=(0, 0),
# transmit power should not block anything in this example
transmit_power_dbm=100,
name="nso1",
)
nso2 = infra.add_source(pos=(1, 0), transmit_power_dbm=100, name="nso2")
_nrelay = infra.add_intermediate(
pos=(0, 1), transmit_power_dbm=100, name="nr"
)
_ninterm = infra.add_intermediate(
pos=(2, 0), transmit_power_dbm=100, name="ni"
)
_nsink = infra.set_sink(pos=(1, 1), transmit_power_dbm=100, name="nsi")
overlay = OverlayNetwork()
bso1 = overlay.add_source(name="bso1")
bso2 = overlay.add_source(name="bso2")
bsi = overlay.set_sink(name="bsi")
bin_ = overlay.add_intermediate(name="bin")
eso1 = ENode(bso1, nso1)
eso2 = ENode(bso2, nso2)
# source1 connects to the sink over the intermediate source2
# connects both to the sink and to source1.
overlay.add_link(bso1, bin_)
overlay.add_link(bin_, bsi)
overlay.add_link(bso2, bsi)
overlay.add_link(bso2, bso1)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(bso1, eso1.node), (bso2, eso2.node)]
)
# source1 can connect to the intermediate, which could be embedded
# in any node (5). It could also connect to any other node as a
# relay (4) -> 9. source2 can connect to the sink (1) or the other
# source (1). It could also connect to any other node as a relay for
# either of its two links (2 * 3) -> 8 No timeslot is used yet, so
# there is just one timeslot option.
assert len(embedding.possibilities()) == 9 + 8
def test_timeslots_dynamically_created():
"""Tests the dynamic creation of new timeslots as needed"""
infra = InfrastructureNetwork()
nso1 = infra.add_source(
name="nso1",
pos=(0, 0),
# transmits so loudly that no other node can realistically
# transmit in the same timeslot
transmit_power_dbm=1000,
)
nso2 = infra.add_source(name="nso2", pos=(1, 0), transmit_power_dbm=1000)
nsi = infra.set_sink(name="nsi", pos=(1, 1), transmit_power_dbm=1000)
overlay = OverlayNetwork()
bso1 = overlay.add_source(name="bso1")
bso2 = overlay.add_source(name="bso2")
bsi = overlay.set_sink(name="bsi")
eso1 = ENode(bso1, nso1)
esi = ENode(bsi, nsi)
overlay.add_link(bso1, bsi)
overlay.add_link(bso2, bsi)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(bso1, nso1), (bso2, nso2)]
)
# nothing used yet
assert embedding.used_timeslots == 0
# it would be possible to create a new timeslot and embed either
# link in it (2) or go to a relay from either source (2)
assert len(embedding.possibilities()) == 4
# Take an action. nosurce1 will transmit so strongly that nso2
# cannot send at the same timelot
assert embedding.take_action(eso1, esi, 0)
# timeslot 0 is now used
assert embedding.used_timeslots == 1
# New options (for creating timeslot 1) were created accordingly.
# The second source could now still send to the other source as a
# relay or to to the sink directly, it will just have to do it in a
# new timeslot.
assert len(embedding.possibilities()) == 2
def get_random_action(embedding: PartialEmbedding, rand):
"""Take a random action on the given partial embedding"""
possibilities = embedding.possibilities()
if len(possibilities) == 0:
return None
choice = rand.randint(0, len(possibilities))
return possibilities[choice]
def parse_embedding(
nodes_file,
sink_source_mapping,
positions_file,
source_seed,
blocks_file,
links_file,
transmit_power_dbm,
datarate,
):
"""Reads a problem instance in MARVELO format from csv files"""
infra = parse_infra(
nodes_file,
sink_source_mapping,
positions_file,
source_seed,
transmit_power_dbm,
)
if infra is None:
return None
overlay = parse_overlay(blocks_file, links_file, datarate)
# otherwise the mapping wouldn't be specified
assert len(overlay.sources) == 1
assert len(infra.sources) == 1
overlay_source = list(overlay.sources)[0]
infra_source = list(infra.sources)[0]
source_mapping = [(overlay_source, infra_source)]
return PartialEmbedding(infra, overlay, source_mapping)
def test_count_timeslots_parallel():
"""Tests correct counting behaviour with parallel connections"""
infra = InfrastructureNetwork()
# One source, one sink, two intermediates
nsource = infra.add_source(
pos=(0, 0), transmit_power_dbm=30, name="nsource"
)
ninterm1 = infra.add_intermediate(
pos=(1, 2), transmit_power_dbm=30, name="ninterm1"
)
ninterm2 = infra.add_intermediate(
pos=(1, -2), transmit_power_dbm=30, name="ninterm2"
)
nsink = infra.set_sink(pos=(2, 0), transmit_power_dbm=30, name="nsink")
overlay = OverlayNetwork()
esource = ENode(overlay.add_source(name="bsource"), nsource)
einterm1 = ENode(overlay.add_intermediate(name="binterm1"), ninterm1)
einterm2 = ENode(overlay.add_intermediate(name="binterm2"), ninterm2)
esink = ENode(overlay.set_sink(name="bsink"), nsink)
# fork
overlay.add_link(esource.block, einterm1.block)
overlay.add_link(esource.block, einterm2.block)
overlay.add_link(einterm1.block, esink.block)
overlay.add_link(einterm2.block, esink.block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(esource.block, esource.node)]
)
assert not embedding.is_complete()
assert embedding.used_timeslots == 0
assert embedding.take_action(esource, einterm1, 0)
assert embedding.take_action(esource, einterm2, 0)
assert not embedding.is_complete()
assert embedding.used_timeslots == 1
assert embedding.take_action(einterm1, esink, 1)
assert not embedding.is_complete()
assert embedding.used_timeslots == 2
assert embedding.take_action(einterm2, esink, 2)
assert embedding.is_complete()
assert embedding.used_timeslots == 3
def test_invalidating_earlier_choice_impossible():
"""
Tests that an action that would invalidate an earlier action is
impossible.
"""
infra = InfrastructureNetwork()
# Two sources, one sink. Equal distance from both sources to sink.
# One source with moderate transmit power (but enough to cover the
# distance, one source with excessive transmit power.
# transmit_power_dbm
# power of 30dBm (similar to a regular router) which should easily
# cover the distance of 1m without any noise.
source_node_silent = infra.add_source(
pos=(0, 0), transmit_power_dbm=20, name="Silent"
)
source_node_screamer = infra.add_source(
pos=(3, 0), transmit_power_dbm=100, name="Screamer"
)
node_sink = infra.set_sink(pos=(1, 3), transmit_power_dbm=0, name="Sink")
overlay = OverlayNetwork()
esource_silent = ENode(overlay.add_source(), source_node_silent)
esource_screamer = ENode(overlay.add_source(), source_node_screamer)
esink = ENode(overlay.set_sink(), node_sink)
overlay.add_link(esource_silent.block, esink.block)
overlay.add_link(esource_screamer.block, esink.block)
embedding = PartialEmbedding(
infra,
overlay,
source_mapping=[
(esource_silent.block, esource_silent.node),
(esource_screamer.block, esource_screamer.node),
],
)
action_to_be_invalidated = (esource_screamer, esink, 0)
# make sure the action is an option in the first place
assert action_to_be_invalidated in embedding.possibilities()
# embed the link from the silent node to the sink
embedding.take_action(esource_silent, esink, 0)
# first assert that action would be valid by itself
screamer_sinr = embedding.known_sinr(source_node_screamer, node_sink, 0)
assert screamer_sinr > 2.0
new_possibilities = embedding.possibilities()
# but since the action would make the first embedding invalid (a
# node cannot receive two signals at the same time), it should still
# not be possible
assert action_to_be_invalidated not in new_possibilities
# since there are no options left in the first timeslot, there are
# now exactly 2 (screamer -> silent as relay, screamer -> sink
# embedded) options left in the newly created second timeslot
assert len(new_possibilities) == 2
def test_outlinks_limited():
"""
Tests that the number of possible outlinks is limited by the number
of outlinks to embed for that block.
"""
infra = InfrastructureNetwork()
nsource = infra.add_source(pos=(0, 0), transmit_power_dbm=1, name="nso")
nrelay = infra.add_intermediate(
pos=(1, 0), transmit_power_dbm=1, name="nr"
)
# The sink is way out of reach, embedding is not possible
_nsink = infra.set_sink(pos=(1, 1), transmit_power_dbm=1, name="nsi")
overlay = OverlayNetwork()
bsource = overlay.add_source(name="bso")
bsink = overlay.set_sink(name="bsi")
esource = ENode(bsource, nsource)
overlay.add_link(bsource, bsink)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(esource.block, esource.node)]
)
erelay = ENode(bsource, nrelay, bsink)
assert embedding.take_action(esource, erelay, 0)
possibilities_from_source = [
(source, target, timeslot)
for (source, target, timeslot) in embedding.possibilities()
if source == esource
]
# the source block has one outgoing edge, one outlink is already
# embedded (although the link is not embedded completely)
assert len(possibilities_from_source) == 0
possibilities_from_relay = [
(source, target, timeslot)
for (source, target, timeslot) in embedding.possibilities()
if source == erelay
]
# yet the link can be continued from the relay
assert len(possibilities_from_relay) > 0
def test_block_embedding_is_unique():
"""Tests that other embedding options are removed once one of them
is chosen"""
infra = InfrastructureNetwork()
nso1 = infra.add_source(pos=(0, 0), transmit_power_dbm=26, name="nso1")
nso2 = infra.add_source(pos=(2, 0), transmit_power_dbm=26, name="nso2")
_nsi = infra.set_sink(pos=(0, 1), transmit_power_dbm=16, name="nsi")
n1 = infra.add_intermediate(pos=(1, 0), transmit_power_dbm=16, name="n1")
_n2 = infra.add_intermediate(pos=(1, 1), transmit_power_dbm=16, name="n2")
overlay = OverlayNetwork()
bso1 = overlay.add_source(name="bso1")
bso2 = overlay.add_source(name="bso2")
binterm = overlay.add_intermediate(name="binterm")
bsi = overlay.set_sink(name="bsi")
overlay.add_link(bso1, binterm)
# there are multiple in-edges to binterm, which could lead to
# multiple different embeddings
overlay.add_link(bso2, binterm)
overlay.add_link(binterm, bsi)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(bso1, nso1), (bso2, nso2)]
)
eso1 = ENode(bso1, nso1)
def embeddings_for_block(block):
count = 0
for node in embedding.graph.nodes():
if node.block == block:
count += 1
return count
# could embed binterm in multiple blocks
assert embeddings_for_block(binterm) > 1
# decide for one embedding
assert embedding.take_action(eso1, ENode(binterm, n1), 0)
# other options are removed
assert embeddings_for_block(binterm) == 1
def test_loop_within_infra_possible():
"""
Tests that a loop within the infrastructure is always possible and
does not interfere with other connections. This can be used to embed
multiple consecutive blocks within one node.
"""
infra = InfrastructureNetwork()
nsource = infra.add_source(pos=(0, 0), transmit_power_dbm=30, name="nso")
nsink = infra.set_sink(pos=(1, 0), transmit_power_dbm=30, name="nsi")
overlay = OverlayNetwork()
esource = ENode(overlay.add_source(name="bso"), nsource)
einterm = ENode(overlay.add_intermediate(name="bin"), nsource)
esink = ENode(overlay.set_sink(name="bsi"), nsink)
overlay.add_link(esource.block, einterm.block)
overlay.add_link(einterm.block, esink.block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(esource.block, esource.node)]
)
sinr_before = embedding.known_sinr(nsource, nsink, 0)
assert embedding.take_action(esource, einterm, 0)
sinr_after = embedding.known_sinr(nsource, nsink, 0)
assert sinr_before == sinr_after
assert embedding.take_action(einterm, esink, 0)
assert embedding.is_complete()
def embedding_fails(overlay):
source_block = list(overlay.sources)[0]
print(f"bso is {source_block}")
failed = False
try:
_embedding = PartialEmbedding(
infra, overlay, source_mapping=[(source_block, nso)]
)
except AssertionError as _:
failed = True
return failed
def test_completion_detection():
"""
Tests that the completeness of an embedding is accurately detected
in a simple example.
"""
infra = InfrastructureNetwork()
# One source, one sink, one relay.
# Enough transmit power so that it doesn't need to be taken into account
nsource = infra.add_source(
pos=(0, 0),
# transmit power should not block anything in this example
transmit_power_dbm=100,
)
_nrelay = infra.add_intermediate(pos=(0, 1), transmit_power_dbm=100)
nsink = infra.set_sink(pos=(1, 1), transmit_power_dbm=100)
overlay = OverlayNetwork()
esource = ENode(overlay.add_source(), nsource)
esink = ENode(overlay.set_sink(), nsink)
overlay.add_link(esource.block, esink.block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(esource.block, esource.node)]
)
assert not embedding.is_complete()
embedding.take_action(esource, esink, 0)
assert embedding.is_complete()
def test_connection_within_node_always_possible():
"""Tests that a node cannot send and receive at the same time"""
infra = InfrastructureNetwork()
nso = infra.add_source(name="nso", pos=(0, 0), transmit_power_dbm=30)
nsi = infra.set_sink(name="nsi", pos=(2, 0), transmit_power_dbm=30)
overlay = OverlayNetwork()
bso = overlay.add_source(name="bso", datarate=0, requirement=0)
bin_ = overlay.add_intermediate(name="bin", datarate=0, requirement=0)
bsi = overlay.set_sink(name="bsi", datarate=0, requirement=0)
overlay.add_link(bso, bin_)
overlay.add_link(bin_, bsi)
embedding = PartialEmbedding(infra, overlay, source_mapping=[(bso, nso)])
eso = ENode(bso, nso)
ein = ENode(bin_, nsi)
esi = ENode(bsi, nsi)
assert embedding.take_action(eso, ein, 0)
# even though nsi is already receiving in ts 0
assert embedding.take_action(ein, esi, 0)
def test_half_duplex():
"""Tests that a node cannot send and receive at the same time"""
infra = InfrastructureNetwork()
nso = infra.add_source(name="nso", pos=(0, 0), transmit_power_dbm=30)
ni = infra.add_intermediate(name="ni", pos=(1, 0), transmit_power_dbm=30)
nsi = infra.set_sink(name="nsi", pos=(2, 0), transmit_power_dbm=30)
overlay = OverlayNetwork()
# links have no datarate requirements, so SINR concerns don't apply
bso = overlay.add_source(name="bso", datarate=0)
bsi = overlay.set_sink(name="bsi", datarate=0)
overlay.add_link(bso, bsi)
embedding = PartialEmbedding(infra, overlay, source_mapping=[(bso, nso)])
eso = ENode(bso, nso)
esi = ENode(bsi, nsi)
ein = ENode(bso, ni, bsi)
print(embedding.possibilities())
assert embedding.take_action(eso, ein, 0)
assert not embedding.take_action(ein, esi, 0)
def test_same_connection_not_possible_twice():
"""Tests that the same connection cannot be taken twice"""
infra = InfrastructureNetwork()
N2 = infra.add_source(name="N2", pos=(2.3, 2.2), transmit_power_dbm=26.9)
N3 = infra.add_intermediate(name="N3", pos=(0, 4), transmit_power_dbm=11)
_N1 = infra.set_sink(name="N1", pos=(9.4, 9.5), transmit_power_dbm=26.1)
overlay = OverlayNetwork()
B2 = overlay.add_source(name="B2")
B3 = overlay.add_intermediate(name="B3")
B1 = overlay.set_sink(name="B1")
overlay.add_link(B2, B1)
overlay.add_link(B2, B3)
overlay.add_link(B3, B1)
embedding = PartialEmbedding(infra, overlay, source_mapping=[(B2, N2)])
eso = ENode(B2, N2)
ein = ENode(B2, N3, B1)
assert embedding.take_action(eso, ein, 0)
# this connection has already been taken
assert not embedding.take_action(eso, ein, 1)
def _build_example():
# for quick testing
infra = InfrastructureNetwork()
n1 = infra.add_source(pos=(0, 3),
transmit_power_dbm=14,
capacity=5,
name="N1")
n2 = infra.add_source(pos=(0, 1),
transmit_power_dbm=8,
capacity=8,
name="N2")
n3 = infra.add_intermediate(pos=(2, 2),
transmit_power_dbm=32,
capacity=20,
name="N3")
n4 = infra.set_sink(pos=(3, 0),
transmit_power_dbm=10,
capacity=10,
name="N4")
n5 = infra.add_intermediate(pos=(1, 2),
transmit_power_dbm=20,
capacity=42,
name="N5")
overlay = OverlayNetwork()
b1 = overlay.add_source(requirement=5, name="B1")
b2 = overlay.add_source(requirement=5, name="B2")
b3 = overlay.add_intermediate(requirement=5, name="B3")
b4 = overlay.set_sink(requirement=5, name="B4")
overlay.add_link(b1, b3)
overlay.add_link(b2, b3)
overlay.add_link(b3, b4)
overlay.add_link(b2, b4)
embedding = PartialEmbedding(infra,
overlay,
source_mapping=[(b1, n1), (b2, n2)])
assert embedding.take_action(ENode(b1, n1), ENode(None, n5), 0)
assert embedding.take_action(ENode(None, n5, ENode(b1, n1)), ENode(b3, n3),
1)
assert embedding.take_action(ENode(b2, n2), ENode(None, n5), 2)
assert embedding.take_action(ENode(None, n5, ENode(b2, n2)), ENode(b3, n3),
3)
assert embedding.take_action(ENode(b2, n2), ENode(b4, n4), 2)
assert embedding.take_action(ENode(b3, n3), ENode(b4, n4), 4)
return embedding
def random_embedding(self, rand):
"""Generate matching random infrastructure + overlay + embedding"""
# at least one source, has to match between infra and overlay
num_sources = self.num_sources_dist(rand)
while True:
infra = self.random_infrastructure(num_sources, rand)
overlay = self.random_overlay(num_sources, rand)
source_mapping = list(
zip(list(overlay.sources), list(infra.sources)))
# make sure all sources and the sink are actually embeddable
valid = True # be optimistic
for (block, node) in source_mapping + [(overlay.sink, infra.sink)]:
if overlay.requirement(block) > infra.capacity(node):
valid = False
if valid:
return PartialEmbedding(infra, overlay, source_mapping)
def __init__(self, embedding: PartialEmbedding):
self.embedding = embedding
self.V = frozenset(
[_enode_to_triple(enode) for enode in embedding.nodes()])
self.E = frozenset([(_enode_to_triple(u), _enode_to_triple(v), t)
for (u, v, t) in embedding.graph.edges(keys=True)])
self.N = frozenset(embedding.infra.nodes())
self.B = frozenset(embedding.overlay.blocks())
self.L = frozenset(embedding.overlay.graph.edges())
self.S = frozenset(embedding.overlay.sources)
self.bsink = embedding.overlay.sink
self.A = frozenset([(_enode_to_triple(source),
_enode_to_triple(target), timeslot) for (
(source, target),
timeslot,
) in embedding.taken_edges.items()])
# close enough to the variant in the paper
self.U = {t for (u, v, t) in self.A}
def test_unnecessary_links_removed_in_other_timeslots():
"""
Tests that links in other timeslots are removed if they are embedded
in one timeslot.
"""
infra = InfrastructureNetwork()
nfaraway_1 = infra.add_source(
pos=(999999998, 99999999), transmit_power_dbm=5, name="nfaraway_1"
)
nfaraway_2 = infra.add_intermediate(
pos=(999999999, 99999999), transmit_power_dbm=5, name="nfaraway_2"
)
nsi = infra.set_sink(pos=(9, 5), transmit_power_dbm=12, name="nsi")
nso = infra.add_source(pos=(8, 3), transmit_power_dbm=3, name="nso")
overlay = OverlayNetwork()
bsi = overlay.set_sink(name="bsi")
bso = overlay.add_source(name="bso")
bfaraway_1 = overlay.add_source(name="bfaraway_1")
bfaraway_2 = overlay.add_intermediate(name="bfaraway_2", datarate=0)
overlay.add_link(bso, bsi)
overlay.add_link(bfaraway_1, bfaraway_2)
# just to make it correct
overlay.add_link(bfaraway_2, bsi)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(bso, nso), (bfaraway_1, nfaraway_1)]
)
esi = ENode(bsi, nsi)
eso = ENode(bso, nso)
efaraway_1 = ENode(bfaraway_1, nfaraway_1)
efaraway_2 = ENode(bfaraway_2, nfaraway_2)
# make sure a second timeslot is created
assert embedding.take_action(efaraway_1, efaraway_2, 0)
# make sure embedding is possible in ts1
assert (eso, esi, 1) in embedding.possibilities()
# embed the link in ts 0
assert embedding.take_action(eso, esi, 0)
# now no embedding in another timeslot should be possible anymore
possible_outlinks_from_eso = [
pos for pos in embedding.possibilities() if pos[0] == eso
]
assert len(possible_outlinks_from_eso) == 0
def test_broadcast_possible():
"""Tests that broadcast is possible despite SINR constraints"""
infra = InfrastructureNetwork()
# One source, one sink, one intermediate
nsource = infra.add_source(pos=(0, 0), transmit_power_dbm=30)
ninterm = infra.add_intermediate(pos=(1, 2), transmit_power_dbm=30)
nsink = infra.set_sink(pos=(2, 0), transmit_power_dbm=30)
overlay = OverlayNetwork()
esource = ENode(overlay.add_source(), nsource)
einterm = ENode(overlay.add_intermediate(), ninterm)
esink = ENode(overlay.set_sink(), nsink)
# fork
overlay.add_link(esource.block, einterm.block)
overlay.add_link(esource.block, esink.block)
# make complete
overlay.add_link(einterm.block, esink.block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(esource.block, esource.node)]
)
# Broadcast from source to sink and intermediate
sinr_before = embedding.known_sinr(esource.node, esink.node, timeslot=0)
assert embedding.take_action(esource, esink, 0)
# Easiest way to test this, easy to change if internals change.
# pylint: disable=protected-access
power_at_sink = embedding.infra.power_at_node(
esink.node, frozenset(embedding._nodes_sending_in[0])
)
assert embedding.take_action(esource, einterm, 0)
# Make sure the broadcasting isn't counted twice
new_power = embedding.infra.power_at_node(
esink.node, frozenset(embedding._nodes_sending_in[0])
)
assert new_power == power_at_sink
# Make sure the broadcasts do not interfere with each other
assert sinr_before == embedding.known_sinr(
esource.node, esink.node, timeslot=0
)
def act(emb: PartialEmbedding, randomness, rand):
"""Take a semi-greedy action"""
min_ts_actions = None
possible_actions = sorted(emb.possibilities())
min_ts = inf
for (u, v, t) in possible_actions:
if t < min_ts:
min_ts = t
min_ts_actions = []
if t == min_ts:
min_ts_actions.append((u, v, t))
preferred_actions = min_ts_actions
not_relay_actions = []
for (u, v, t) in preferred_actions:
if not v.relay:
not_relay_actions.append((u, v, t))
if len(not_relay_actions) > 0:
preferred_actions = not_relay_actions
same_node_options = []
for (u, v, t) in preferred_actions:
if u.node == v.node:
same_node_options.append((u, v, t))
if len(same_node_options) > 0:
preferred_actions = same_node_options
# break out of reset loops by acting random every once in a while
if rand.rand() < randomness:
preferred_actions = possible_actions
choice_idx = rand.choice(range(len(preferred_actions)))
return preferred_actions[choice_idx]
def test_count_timeslots_multiple_sources():
"""Tests correct counting behaviour with multiple sources"""
infra = InfrastructureNetwork()
nsource1 = infra.add_source(pos=(0, -1), transmit_power_dbm=30)
nsource2 = infra.add_source(pos=(0, 1), transmit_power_dbm=30)
nsink = infra.set_sink(pos=(1, 0), transmit_power_dbm=30)
overlay = OverlayNetwork()
esource1 = ENode(overlay.add_source(), nsource1)
esource2 = ENode(overlay.add_source(), nsource2)
esink = ENode(overlay.set_sink(), nsink)
overlay.add_link(esource1.block, esink.block)
overlay.add_link(esource2.block, esink.block)
embedding = PartialEmbedding(
infra,
overlay,
source_mapping=[
(esource1.block, esource1.node),
(esource2.block, esource2.node),
],
)
assert not embedding.is_complete()
assert embedding.used_timeslots == 0
assert embedding.take_action(esource1, esink, 0)
assert not embedding.is_complete()
assert embedding.used_timeslots == 1
assert embedding.take_action(esource2, esink, 1)
assert embedding.is_complete()
assert embedding.used_timeslots == 2
def test_no_unnecessary_options():
"""
Tests that no unnecessary connections are offered.
"""
infra = InfrastructureNetwork()
# Two sources, one sink. Equal distance from both sources to sink.
# One source with moderate transmit power (but enough to cover the
# distance, one source with excessive transmit power.
# transmit_power_dbm
# power of 30dBm (similar to a regular router) which should easily
# cover the distance of 1m without any noise.
source_node = infra.add_source(
pos=(0, 0), transmit_power_dbm=30, name="Source"
)
sink_node = infra.set_sink(pos=(1, 3), transmit_power_dbm=0, name="Sink")
overlay = OverlayNetwork()
esource = ENode(overlay.add_source(), source_node)
esink = ENode(overlay.set_sink(), sink_node)
overlay.add_link(esource.block, esink.block)
embedding = PartialEmbedding(
infra, overlay, source_mapping=[(esource.block, esource.node)]
)
assert len(embedding.possibilities()) == 1
# embed the sink
embedding.take_action(esource, esink, 0)
# Now it would still be *feasible* according to add a connection to
# the relay in the other timeslot. It shouldn't be possible however,
# since all outgoing connections are already embedded.
assert len(embedding.possibilities()) == 0
