def is_concurrent(*lines): """ Returns True if the set of linear entities are concurrent, False otherwise. Two or more linear entities are concurrent if they all intersect at a single point. Description of Method Used: =========================== Simply take the first two lines and find their intersection. If there is no intersection, then the first two lines were parallel and had no intersection so concurrency is impossible amongst the whole set. Otherwise, check to see if the intersection point of the first two lines is a member on the rest of the lines. If so, the lines are concurrent. """ _lines = lines lines = GeometryEntity.extract_entities(lines) # Concurrency requires intersection at a single point; One linear # entity cannot be concurrent. if len(lines) <= 1: return False try: # Get the intersection (if parallel) p = GeometryEntity.do_intersection(lines[0], lines[1]) if len(p) == 0: return False # Make sure the intersection is on every linear entity for line in lines[2:]: if p[0] not in line: return False return True except AttributeError: return False
def bisectors(self): """The angle bisectors of the triangle. An angle bisector of a triangle is a straight line through a vertex which cuts the corresponding angle in half. Returns ------- bisectors : dict Each key is a vertex (Point) and each value is the corresponding bisector (Segment). See Also -------- Point Segment Examples -------- >>> from sympy.geometry import Point, Triangle, Segment >>> p1, p2, p3 = Point(0, 0), Point(1, 0), Point(0, 1) >>> t = Triangle(p1, p2, p3) >>> from sympy import sqrt >>> t.bisectors[p2] == Segment(Point(0, sqrt(2) - 1), Point(1, 0)) True """ s = self.sides v = self.vertices c = self.incenter l1 = Segment(v[0], GeometryEntity.do_intersection(Line(v[0], c), s[1])[0]) l2 = Segment(v[1], GeometryEntity.do_intersection(Line(v[1], c), s[2])[0]) l3 = Segment(v[2], GeometryEntity.do_intersection(Line(v[2], c), s[0])[0]) return {v[0]: l1, v[1]: l2, v[2]: l3}
def bisectors(self): """ The angle bisectors of the triangle in a dictionary where the key is the vertex and the value is the bisector at that point. Example: ======== >>> from sympy.geometry import Point, Triangle, Segment >>> p1,p2,p3 = Point(0,0), Point(1,0), Point(0,1) >>> t = Triangle(p1, p2, p3) >>> from sympy import sqrt >>> t.bisectors[p2] == Segment(Point(0, sqrt(2)-1), Point(1, 0)) True """ s = self.sides v = self.vertices c = self.incenter l1 = Segment(v[0], GeometryEntity.do_intersection(Line(v[0], c), s[1])[0]) l2 = Segment(v[1], GeometryEntity.do_intersection(Line(v[1], c), s[2])[0]) l3 = Segment(v[2], GeometryEntity.do_intersection(Line(v[2], c), s[0])[0]) return {v[0]: l1, v[1]: l2, v[2]: l3}
def intersection(*entities): """The intersection of a collection of GeometryEntity instances. Parameters ---------- entities : sequence of GeometryEntity Returns ------- intersection : list of GeometryEntity Raises ------ NotImplementedError When unable to calculate intersection. Notes ----- The intersection of any geometrical entity with itself should return a list with one item: the entity in question. An intersection requires two or more entities. If only a single entity is given then the function will return an empty list. It is possible for `intersection` to miss intersections that one knows exists because the required quantities were not fully simplified internally. Reals should be converted to Rationals, e.g. Rational(str(real_num)) or else failures due to floating point issues may result. Examples -------- >>> from sympy.geometry import Point, Line, Circle, intersection >>> p1, p2, p3 = Point(0, 0), Point(1, 1), Point(-1, 5) >>> l1, l2 = Line(p1, p2), Line(p3, p2) >>> c = Circle(p2, 1) >>> intersection(l1, p2) [Point(1, 1)] >>> intersection(l1, l2) [Point(1, 1)] >>> intersection(c, p2) [] >>> intersection(c, Point(1, 0)) [Point(1, 0)] >>> intersection(c, l2) [Point(1 - 5**(1/2)/5, 1 + 2*5**(1/2)/5), Point(1 + 5**(1/2)/5, 1 - 2*5**(1/2)/5)] """ from entity import GeometryEntity entities = GeometryEntity.extract_entities(entities, False) if len(entities) <= 1: return [] res = GeometryEntity.do_intersection(entities[0], entities[1]) for entity in entities[2:]: newres = [] for x in res: newres.extend(GeometryEntity.do_intersection(x, entity)) res = newres return res
def is_concurrent(*lines): """Is a sequence of linear entities concurrent? Two or more linear entities are concurrent if they all intersect at a single point. Parameters ---------- lines : a sequence of linear entities. Returns ------- True if the set of linear entities are concurrent, False otherwise. Notes ----- Simply take the first two lines and find their intersection. If there is no intersection, then the first two lines were parallel and had no intersection so concurrency is impossible amongst the whole set. Otherwise, check to see if the intersection point of the first two lines is a member on the rest of the lines. If so, the lines are concurrent. Examples -------- >>> from sympy import Point, Line >>> p1, p2 = Point(0, 0), Point(3, 5) >>> p3, p4 = Point(-2, -2), Point(0, 2) >>> l1, l2, l3 = Line(p1, p2), Line(p1, p3), Line(p1, p4) >>> l1.is_concurrent(l2, l3) True >>> l4 = Line(p2, p3) >>> l4.is_concurrent(l2, l3) False """ _lines = lines lines = GeometryEntity.extract_entities(lines) # Concurrency requires intersection at a single point; One linear # entity cannot be concurrent. if len(lines) <= 1: return False try: # Get the intersection (if parallel) p = GeometryEntity.do_intersection(lines[0], lines[1]) if len(p) == 0: return False # Make sure the intersection is on every linear entity for line in lines[2:]: if p[0] not in line: return False return True except AttributeError: return False
def __new__(cls, *args, **kwargs): vertices = GeometryEntity.extract_entities(args, remove_duplicates=False) if len(vertices) != 3: raise GeometryError("Triangle.__new__ requires three points") for p in vertices: if not isinstance(p, Point): raise GeometryError("Triangle.__new__ requires three points") return GeometryEntity.__new__(cls, *vertices, **kwargs)
def intersection(self, o): res = [] for side in self.sides: inter = GeometryEntity.do_intersection(side, o) if inter is not None: res.extend(inter) return res
def is_collinear(*points): """Is a sequence of points collinear? Test whether or not a set of points are collinear. Returns True if the set of points are collinear, or False otherwise. Parameters ---------- points : sequence of Point Returns ------- is_collinear : boolean Notes -------------------------- Slope is preserved everywhere on a line, so the slope between any two points on the line should be the same. Take the first two points, p1 and p2, and create a translated point v1 with p1 as the origin. Now for every other point we create a translated point, vi with p1 also as the origin. Note that these translations preserve slope since everything is consistently translated to a new origin of p1. Since slope is preserved then we have the following equality: v1_slope = vi_slope => v1.y/v1.x = vi.y/vi.x (due to translation) => v1.y*vi.x = vi.y*v1.x => v1.y*vi.x - vi.y*v1.x = 0 (*) Hence, if we have a vi such that the equality in (*) is False then the points are not collinear. We do this test for every point in the list, and if all pass then they are collinear. Examples -------- >>> from sympy import Point >>> from sympy.abc import x >>> p1, p2 = Point(0, 0), Point(1, 1) >>> p3, p4, p5 = Point(2, 2), Point(x, x), Point(1, 2) >>> Point.is_collinear(p1, p2, p3, p4) True >>> Point.is_collinear(p1, p2, p3, p5) False """ points = GeometryEntity.extract_entities(points) if len(points) == 0: return False if len(points) <= 2: return True # two points always form a line # XXX Cross product is used now, but that only extends to three # dimensions. If the concept needs to extend to greater # dimensions then another method would have to be used p1 = points[0] p2 = points[1] v1 = p2 - p1 for p3 in points[2:]: v2 = p3 - p1 test = simplify(v1[0]*v2[1] - v1[1]*v2[0]) if simplify(test) != 0: return False return True
def __new__(cls, function, limits): fun = sympify(function) if not ordered_iter(fun) or len(fun) != 2: raise ValueError("Function argument should be (x(t), y(t)) but got %s" % str(function)) if not ordered_iter(limits) or len(limits) != 3: raise ValueError("Limit argument should be (t, tmin, tmax) but got %s" % str(limits)) return GeometryEntity.__new__(cls, tuple(sympify(fun)), tuple(sympify(limits)))
def __new__(cls, p1, p2, **kwargs): if not isinstance(p1, Point) or not isinstance(p2, Point): raise TypeError("%s.__new__ requires Point instances" % cls.__name__) if p1 == p2: raise RuntimeError("%s.__new__ requires two distinct points" % cls.__name__) return GeometryEntity.__new__(cls, p1, p2, **kwargs)
def perpendicular_segment(self, p): """Create a perpendicular line segment from `p` to this line. Parameters ---------- p : Point Returns ------- segment : Segment Notes ----- Returns `p` itself if `p` is on this linear entity. Examples -------- >>> from sympy import Point, Line >>> p1, p2, p3 = Point(0, 0), Point(1, 1), Point(0, 2) >>> l1 = Line(p1, p2) >>> s1 = l1.perpendicular_segment(p3) >>> l1.is_perpendicular(s1) True >>> p3 in s1 True """ if p in self: return p pl = self.perpendicular_line(p) p2 = GeometryEntity.do_intersection(self, pl)[0] return Segment(p, p2)
def __new__(cls, center=None, hradius=None, vradius=None, eccentricity=None, **kwargs): hradius = sympify(hradius) vradius = sympify(vradius) eccentricity = sympify(eccentricity) if len(filter(None, (hradius, vradius, eccentricity))) != 2: raise ValueError, 'Exactly two arguments between "hradius", '\ '"vradius", and "eccentricity" must be not None."' if eccentricity is not None: if hradius is None: hradius = vradius / sqrt(1 - eccentricity**2) elif vradius is None: vradius = hradius * sqrt(1 - eccentricity**2) else: if hradius is None and vradius is None: raise ValueError("At least two arguments between hradius, " "vradius and eccentricity must not be none.") if center is None: center = Point(0, 0) if not isinstance(center, Point): raise TypeError("center must be a Point") if hradius == vradius: return Circle(center, hradius, **kwargs) return GeometryEntity.__new__(cls, center, hradius, vradius, **kwargs)
def __new__(cls, function, limits): fun = sympify(function) if not fun: raise GeometryError("%s.__new__ don't know how to handle" % cls.__name__); if not isinstance(limits, (list, tuple)) or len(limits) != 3: raise ValueError("Limits argument has wrong syntax"); return GeometryEntity.__new__(cls, fun, limits)
def __new__(cls, *args, **kwargs): if len(args) != 3: raise GeometryError("Triangle.__new__ requires three points") vertices = [Point(a) for a in args] # remove consecutive duplicates nodup = [] for p in vertices: if nodup and p == nodup[-1]: continue nodup.append(p) if len(nodup) > 1 and nodup[-1] == nodup[0]: nodup.pop() # last point was same as first # remove collinear points i = -3 while i < len(nodup) - 3 and len(nodup) > 2: a, b, c = sorted([nodup[i], nodup[i + 1], nodup[i + 2]]) if Point.is_collinear(a, b, c): nodup[i] = a nodup[i + 1] = None nodup.pop(i + 1) i += 1 vertices = filter(lambda x: x is not None, nodup) if len(vertices) == 3: return GeometryEntity.__new__(cls, *vertices, **kwargs) elif len(vertices) == 2: return Segment(*vertices, **kwargs) else: return Point(*vertices, **kwargs)
def __new__( cls, center=None, hradius=None, vradius=None, eccentricity=None, **kwargs): hradius = sympify(hradius) vradius = sympify(vradius) eccentricity = sympify(eccentricity) if center is None: center = Point(0, 0) else: center = Point(center) if len(filter(None, (hradius, vradius, eccentricity))) != 2: raise ValueError('Exactly two arguments of "hradius", ' '"vradius", and "eccentricity" must not be None."') if eccentricity is not None: if hradius is None: hradius = vradius / sqrt(1 - eccentricity**2) elif vradius is None: vradius = hradius * sqrt(1 - eccentricity**2) if hradius == vradius: return Circle(center, hradius, **kwargs) return GeometryEntity.__new__(cls, center, hradius, vradius, **kwargs)
def intersection(self, o): """The intersection of two polygons. The intersection may be empty and can contain individual Points and complete Line Segments. Parameters ---------- other: Polygon Returns ------- intersection : list The list of Segments and Points Examples -------- >>> from sympy import Point, Polygon >>> p1, p2, p3, p4 = map(Point, [(0, 0), (1, 0), (5, 1), (0, 1)]) >>> poly1 = Polygon(p1, p2, p3, p4) >>> p5, p6, p7, p8 = map(Point, [(3, 2), (1, -1), (0, 2), (-2, 1)]) >>> poly2 = Polygon(p5, p6, p7, p8) >>> poly1.intersection(poly2) [Point(2/3, 0), Point(9/5, 1/5), Point(7/3, 1), Point(1/3, 1)] """ res = [] for side in self.sides: inter = GeometryEntity.do_intersection(side, o) if inter is not None: res.extend(inter) return res
def __new__(cls, center=None, hradius=None, vradius=None, eccentricity=None, **kwargs): hradius = sympify(hradius) vradius = sympify(vradius) eccentricity = sympify(eccentricity) if center is None: center = Point(0, 0) else: center = Point(center) if len(filter(None, (hradius, vradius, eccentricity))) != 2: raise ValueError('Exactly two arguments of "hradius", '\ '"vradius", and "eccentricity" must not be None."') if eccentricity is not None: if hradius is None: hradius = vradius / sqrt(1 - eccentricity**2) elif vradius is None: vradius = hradius * sqrt(1 - eccentricity**2) if hradius == vradius: return Circle(center, hradius, **kwargs) return GeometryEntity.__new__(cls, center, hradius, vradius, **kwargs)
def __new__(cls, p1, p2, **kwargs): p1 = Point(p1) p2 = Point(p2) if p1 == p2: # Rolygon returns lower priority classes...should LinearEntity, too? return p1 # raise ValueError("%s.__new__ requires two unique Points." % cls.__name__) return GeometryEntity.__new__(cls, p1, p2, **kwargs)
def intersection(*entities): """ Finds the intersection between a list GeometryEntity instances. Returns a list of all the intersections, Will raise a NotImplementedError exception if unable to calculate the intersection. Examples: ========= >>> from sympy.geometry import * >>> p1,p2,p3 = Point(0,0), Point(1,1), Point(-1, 5) >>> l1, l2 = Line(p1, p2), Line(p3, p2) >>> c = Circle(p2, 1) >>> intersection(l1, p2) [Point(1, 1)] >>> intersection(l1, l2) [Point(1, 1)] >>> intersection(c, p2) [] >>> intersection(c, Point(1, 0)) [Point(1, 0)] >>> intersection(c, l2) [Point(1 - 5**(1/2)/5, 1 + 2*5**(1/2)/5), Point(1 + 5**(1/2)/5, 1 - 2*5**(1/2)/5)] Notes: ====== - The intersection of any geometrical entity with itself should return a list with one item: the entity in question. - An intersection requires two or more entities. If only a single entity is given then one will receive an empty intersection list. - It is possible for intersection() to miss intersections that one knows exists because the required quantities were not fully simplified internally. """ from entity import GeometryEntity entities = GeometryEntity.extract_entities(entities, False) if len(entities) <= 1: return [] res = GeometryEntity.do_intersection(entities[0], entities[1]) for entity in entities[2:]: newres = [] for x in res: newres.extend( GeometryEntity.do_intersection(x, entity) ) res = newres return res
def intersection(*entities): """ Finds the intersection between a list GeometryEntity instances. Returns a list of all the intersections, Will raise a NotImplementedError exception if unable to calculate the intersection. Examples: ========= >>> from sympy.geometry import * >>> p1,p2,p3 = Point(0,0), Point(1,1), Point(-1, 5) >>> l1, l2 = Line(p1, p2), Line(p3, p2) >>> c = Circle(p2, 1) >>> intersection(l1, p2) [Point(1, 1)] >>> intersection(l1, l2) [Point(1, 1)] >>> intersection(c, p2) [] >>> intersection(c, Point(1, 0)) [Point(1, 0)] >>> intersection(c, l2) [Point(1 - 1/5*5**(1/2), 1 + 2*5**(1/2)/5), Point(1 + 1/5*5**(1/2), 1 - 2*5**(1/2)/5)] Notes: ====== - The intersection of any geometrical entity with itself should return a list with one item: the entity in question. - An intersection requires two or more entities. If only a single entity is given then one will receive an empty intersection list. - It is possible for intersection() to miss intersections that one knows exists because the required quantities were not fully simplified internally. """ from entity import GeometryEntity entities = GeometryEntity.extract_entities(entities, False) if len(entities) <= 1: return [] res = GeometryEntity.do_intersection(entities[0], entities[1]) for entity in entities[2:]: newres = [] for x in res: newres.extend( GeometryEntity.do_intersection(x, entity) ) res = newres return res
def __new__(cls, center, hradius, vradius, **kwargs): hradius = sympify(hradius) vradius = sympify(vradius) if not isinstance(center, Point): raise TypeError("center must be be a Point") if hradius == vradius: return Circle(center, hradius, **kwargs) return GeometryEntity.__new__(cls, center, hradius, vradius, **kwargs)
def __new__(cls, *args, **kwargs): if isinstance(args[0], (tuple, list, set)): coords = tuple([sympify(x) for x in args[0]]) else: coords = tuple([sympify(x) for x in args]) if len(coords) != 2: raise NotImplementedError("Only two dimensional points currently supported") return GeometryEntity.__new__(cls, *coords)
def __new__(self, c, r, n, **kwargs): r = sympify(r) if not isinstance(c, Point): raise GeometryError("RegularPolygon.__new__ requires c to be a Point instance") if not isinstance(r, Basic): raise GeometryError("RegularPolygon.__new__ requires r to be a number or Basic instance") if n < 3: raise GeometryError("RegularPolygon.__new__ requires n >= 3") obj = GeometryEntity.__new__(self, c, r, n, **kwargs) return obj
def perpendicular_segment(self, p): """ Returns a new Segment which connects p to a point on this linear entity and is also perpendicular to this line. Returns p itself if p is on this linear entity. """ if p in self: return p pl = self.perpendicular_line(p) p2 = GeometryEntity.do_intersection(self, pl)[0] return Segment(p, p2)
def is_concyclic(*points): """Is a sequence of points concyclic? Test whether or not a sequence of points are concyclic (i.e., they lie on a circle). Parameters ---------- points : sequence of Points Returns ------- is_concyclic : boolean True if points are concyclic, False otherwise. Notes ----- No points are not considered to be concyclic. One or two points are definitely concyclic and three points are conyclic iff they are not collinear. For more than three points, create a circle from the first three points. If the circle cannot be created (i.e., they are collinear) then all of the points cannot be concyclic. If the circle is created successfully then simply check the remaining points for containment in the circle. Examples -------- >>> from sympy.geometry import Point >>> p1, p2 = Point(-1, 0), Point(1, 0) >>> p3, p4 = Point(0, 1), Point(-1, 2) >>> Point.is_concyclic(p1, p2, p3) True >>> Point.is_concyclic(p1, p2, p3, p4) False """ points = GeometryEntity.extract_entities(points) if len(points) == 0: return False if len(points) <= 2: return True if len(points) == 3: return not Point.is_collinear(*points) try: from ellipse import Circle c = Circle(points[0], points[1], points[2]) for point in points[3:]: if point not in c: return False return True except GeometryError, e: # Circle could not be created, because of collinearity of the # three points passed in, hence they are not concyclic. return False
def bisectors(self): """ The angle bisectors of the triangle in a dictionary where the key is the vertex and the value is the bisector at that point. Example: ======== >>> p1,p2,p3 = Point(0,0), Point(1,0), Point(0,1) >>> t = Triangle(p1, p2, p3) >>> t.bisectors[p2] Segment(Point(0, (-1) + 2**(1/2)), Point(1, 0)) """ s = self.sides v = self.vertices c = self.incenter l1 = Segment(v[0], GeometryEntity.do_intersection(Line(v[0], c), s[1])[0]) l2 = Segment(v[1], GeometryEntity.do_intersection(Line(v[1], c), s[2])[0]) l3 = Segment(v[2], GeometryEntity.do_intersection(Line(v[2], c), s[0])[0]) return {v[0]: l1, v[1]: l2, v[2]: l3}
def __new__(cls, *args, **kwargs): if iterable(args[0]): coords = Tuple(*args[0]) elif isinstance(args[0], Point): coords = args[0].args else: coords = Tuple(*args) if len(coords) != 2: raise NotImplementedError("Only two dimensional points currently supported") return GeometryEntity.__new__(cls, *coords)
def __new__(cls, function, limits): fun = sympify(function) if not is_sequence(fun) or len(fun) != 2: raise ValueError( "Function argument should be (x(t), y(t)) but got %s" % str(function)) if not is_sequence(limits) or len(limits) != 3: raise ValueError( "Limit argument should be (t, tmin, tmax) but got %s" % str(limits)) return GeometryEntity.__new__(cls, tuple(sympify(fun)), tuple(sympify(limits)))
def __new__(cls, *args, **kwargs): if iterable(args[0]): coords = Tuple(*args[0]) elif isinstance(args[0], Point): coords = args[0].args else: coords = Tuple(*args) if len(coords) != 2: raise NotImplementedError( "Only two dimensional points currently supported") return GeometryEntity.__new__(cls, *coords)
def __new__(self, c, r, n, rot=0, **kwargs): r, n, rot = sympify([r, n, rot]) c = Point(c) if not isinstance(r, Basic): raise GeometryError("RegularPolygon.__new__ requires r to be a number or Basic instance") if n < 3: raise GeometryError("RegularPolygon.__new__ requires n >= 3") obj = GeometryEntity.__new__(self, c, r, n, **kwargs) obj._n = n obj._center = c obj._radius = r obj._rot = rot return obj
def __new__(cls, *args, **kwargs): if iterable(args[0]): coords = Tuple(*args[0]) elif isinstance(args[0], Point): coords = args[0].args else: coords = Tuple(*args) if len(coords) != 2: raise NotImplementedError("Only two dimensional points currently supported") if kwargs.get('evaluate', True): coords = [nsimplify(c) for c in coords] return GeometryEntity.__new__(cls, *coords)
def rotate(self, angle, pt=None): """Override GeometryEntity.rotate to first rotate the RegularPolygon about its center. >>> from sympy import Point, RegularPolygon, Polygon, pi >>> t = RegularPolygon(Point(1, 0), 1, 3) >>> t[0] # vertex on x-axis Point(2, 0) >>> t.rotate(pi/2).vertices[0] # vertex on y axis now Point(0, 2) """ r = type(self)(*self.args) # need a copy or else changes are in-place r._rot += angle return GeometryEntity.rotate(r, angle, pt)
def __new__(cls, *args, **kwargs): if iterable(args[0]): coords = Tuple(*args[0]) elif isinstance(args[0], Point): coords = args[0].args else: coords = Tuple(*args) if len(coords) != 2: raise NotImplementedError( "Only two dimensional points currently supported") if kwargs.get('evaluate', True): coords = [simplify(nsimplify(c, rational=True)) for c in coords] return GeometryEntity.__new__(cls, *coords)
def __new__(self, c, r, n, rot=0, **kwargs): r, n, rot = sympify([r, n, rot]) c = Point(c) if not isinstance(r, Basic): raise GeometryError( "RegularPolygon.__new__ requires r to be a number or Basic instance" ) if n < 3: raise GeometryError("RegularPolygon.__new__ requires n >= 3") obj = GeometryEntity.__new__(self, c, r, n, **kwargs) obj._n = n obj._center = c obj._radius = r obj._rot = rot return obj
def __new__(cls, *args, **kwargs): c, r = None, None if len(args) == 3 and isinstance(args[0], Point): from polygon import Triangle t = Triangle(args[0], args[1], args[2]) if t.area == 0: raise GeometryError("Cannot construct a circle from three collinear points") c = t.circumcenter r = t.circumradius elif len(args) == 2: # Assume (center, radius) pair c = args[0] r = sympify(args[1]) if not (c is None or r is None): return GeometryEntity.__new__(cls, c, r, **kwargs) raise GeometryError("Circle.__new__ received unknown arguments")
def is_concyclic(*points): """ Test whether or not a set of points are concyclic (i.e., on the same circle). Returns True if they are concyclic, or False otherwise. Example: ======== >>> from sympy.geometry import Point >>> p1,p2 = Point(-1, 0), Point(1, 0) >>> p3,p4 = Point(0, 1), Point(-1, 2) >>> Point.is_concyclic(p1, p2, p3) True >>> Point.is_concyclic(p1, p2, p3, p4) False Description of method used: =========================== No points are not considered to be concyclic. One or two points are definitely concyclic and three points are conyclic iff they are not collinear. For more than three points, we pick the first three points and attempt to create a circle. If the circle cannot be created (i.e., they are collinear) then all of the points cannot be concyclic. If the circle is created successfully then simply check all of the other points for containment in the circle. """ points = GeometryEntity.extract_entities(points) if len(points) == 0: return False if len(points) <= 2: return True if len(points) == 3: return (not Point.is_collinear(*points)) try: from ellipse import Circle c = Circle(points[0], points[1], points[2]) for point in points[3:]: if point not in c: return False return True except GeometryError, e: # Circle could not be created, because of collinearity of the # three points passed in, hence they are not concyclic. return False
def projection(self, o): """ Project a point, line, ray, or segment onto this linear entity. If projection cannot be performed then a GeometryError is raised. Notes: ====== - A projection involves taking the two points that define the linear entity and projecting those points onto a Line and then reforming the linear entity using these projections. - A point P is projected onto a line L by finding the point on L that is closest to P. This is done by creating a perpendicular line through P and L and finding its intersection with L. """ tline = Line(self.p1, self.p2) def project(p): """Project a point onto the line representing self.""" if p in tline: return p l1 = tline.perpendicular_line(p) return tline.intersection(l1)[0] projected = None if isinstance(o, Point): return project(o) elif isinstance(o, LinearEntity): n_p1 = project(o.p1) n_p2 = project(o.p2) if n_p1 == n_p2: projected = n_p1 else: projected = o.__class__(n_p1, n_p2) # Didn't know how to project so raise an error if projected is None: n1 = self.__class__.__name__ n2 = o.__class__.__name__ raise GeometryError("Do not know how to project %s onto %s" % (n2, n1)) return GeometryEntity.do_intersection(self, projected)[0]
def is_concyclic(*points): """ Test whether or not a set of points are concyclic (i.e., on the same circle). Returns True if they are concyclic, or False otherwise. Example: ======== >>> from sympy.geometry import Point >>> p1,p2 = Point(-1, 0), Point(1, 0) >>> p3,p4 = Point(0, 1), Point(-1, 2) >>> Point.is_concyclic(p1, p2, p3) True >>> Point.is_concyclic(p1, p2, p3, p4) False Description of method used: =========================== No points are not considered to be concyclic. One or two points are definitely concyclic and three points are conyclic iff they are not collinear. For more than three points, we pick the first three points and attempt to create a circle. If the circle cannot be created (i.e., they are collinear) then all of the points cannot be concyclic. If the circle is created successfully then simply check all of the other points for containment in the circle. """ points = GeometryEntity.extract_entities(points) if len(points) == 0: return False if len(points) <= 2: return True if len(points) == 3: return (not Point.is_collinear(*points)) try: from ellipse import Circle c = Circle(points[0], points[1], points[2]) for point in points[3:]: if point not in c: return False return True except GeometryError,e: # Circle could not be created, because of collinearity of the # three points passed in, hence they are not concyclic. return False
def __new__(cls, *args, **kwargs): c, r = None, None if len(args) == 3: args = [Point(a) for a in args] if Point.is_collinear(*args): raise GeometryError("Cannot construct a circle from three collinear points") from polygon import Triangle t = Triangle(*args) c = t.circumcenter r = t.circumradius elif len(args) == 2: # Assume (center, radius) pair c = Point(args[0]) r = sympify(args[1]) if not (c is None or r is None): return GeometryEntity.__new__(cls, c, r, **kwargs) raise GeometryError("Circle.__new__ received unknown arguments")
def orthocenter(self): """The orthocenter of the triangle. The orthocenter is the intersection of the altitudes of a triangle. Returns ------- orthocenter : Point See Also -------- Point Examples -------- >>> from sympy.geometry import Point, Triangle >>> p1, p2, p3 = Point(0, 0), Point(1, 0), Point(0, 1) >>> t = Triangle(p1, p2, p3) """ a = self.altitudes return GeometryEntity.intersect(a[1], a[2])[0]