def to_code(config):
for spi_ in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
for dc in gpio_output_pin_expression(config[CONF_DC_PIN]):
yield
rhs = App.make_spi_ssd1306(spi_, cs, dc)
ssd = Pvariable(config[CONF_ID], rhs)
add(ssd.set_model(MODELS[config[CONF_MODEL]]))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(ssd.set_reset_pin(reset))
if CONF_EXTERNAL_VCC in config:
add(ssd.set_external_vcc(config[CONF_EXTERNAL_VCC]))
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(display.DisplayBufferRef, 'it')]):
yield
add(ssd.set_writer(lambda_))
display.setup_display(ssd, config)
setup_component(ssd, config)
def to_code(config):
for spi in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
for dc in gpio_output_pin_expression(config[CONF_DC_PIN]):
yield
model_type, model = MODELS[config[CONF_MODEL]]
if model_type == 'a':
rhs = App.make_waveshare_epaper_type_a(spi, cs, dc, model)
epaper = Pvariable(config[CONF_ID], rhs, type=WaveshareEPaperTypeA)
elif model_type == 'b':
rhs = App.make_waveshare_epaper_type_b(spi, cs, dc, model)
epaper = Pvariable(config[CONF_ID], rhs, type=WaveshareEPaper)
else:
raise NotImplementedError()
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(display.DisplayBufferRef, 'it')]):
yield
add(epaper.set_writer(lambda_))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(epaper.set_reset_pin(reset))
if CONF_BUSY_PIN in config:
for reset in gpio_input_pin_expression(config[CONF_BUSY_PIN]):
yield
add(epaper.set_busy_pin(reset))
if CONF_FULL_UPDATE_EVERY in config:
add(epaper.set_full_update_every(config[CONF_FULL_UPDATE_EVERY]))
display.setup_display(epaper, config)
def to_code(config):
rhs = App.make_gpio_lcd_display(config[CONF_DIMENSIONS][0], config[CONF_DIMENSIONS][1])
lcd = Pvariable(config[CONF_ID], rhs)
pins_ = []
for conf in config[CONF_DATA_PINS]:
for pin in gpio_output_pin_expression(conf):
yield
pins_.append(pin)
add(lcd.set_data_pins(*pins_))
for enable in gpio_output_pin_expression(config[CONF_ENABLE_PIN]):
yield
add(lcd.set_enable_pin(enable))
for rs in gpio_output_pin_expression(config[CONF_RS_PIN]):
yield
add(lcd.set_rs_pin(rs))
if CONF_RW_PIN in config:
for rw in gpio_output_pin_expression(config[CONF_RW_PIN]):
yield
add(lcd.set_rw_pin(rw))
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA], [(LCDDisplayRef, 'it')]):
yield
add(lcd.set_writer(lambda_))
display.setup_display(lcd, config)
def to_code(config):
pin_cs = gpio_output_pin_expression(config[CONF_PIN_CS])
pin_clock = gpio_output_pin_expression(config[CONF_PIN_CLOCK])
pin_miso = gpio_input_pin_expression(config[CONF_PIN_MISO])
rhs = App.make_max6675_sensor(config[CONF_NAME], pin_cs, pin_clock,
pin_miso, config.get(CONF_UPDATE_INTERVAL))
make = variable(MakeMAX6675Sensor, config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(make.Pmax6675, make.Pmqtt, config)
def to_code(config):
for step_pin in gpio_output_pin_expression(config[CONF_STEP_PIN]):
yield
for dir_pin in gpio_output_pin_expression(config[CONF_DIR_PIN]):
yield
rhs = App.make_a4988(step_pin, dir_pin)
a4988 = Pvariable(config[CONF_ID], rhs)
if CONF_SLEEP_PIN in config:
for sleep_pin in gpio_output_pin_expression(config[CONF_SLEEP_PIN]):
yield
add(a4988.set_sleep_pin(sleep_pin))
stepper.setup_stepper(a4988, config)
setup_component(a4988, config)
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_output(pin)
gpio = Pvariable(config[CONF_ID], rhs)
output.setup_output_platform(gpio, config)
setup_component(gpio, config)
def to_code(config):
for conf in config:
pin = None
for pin in gpio_output_pin_expression(conf[CONF_PIN]):
yield
rhs = App.make_ir_transmitter(pin, conf.get(CONF_CARRIER_DUTY_PERCENT))
Pvariable(conf[CONF_ID], rhs)
def to_code(config):
pin = None
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_switch(config[CONF_NAME], pin)
gpio = variable(config[CONF_MAKE_ID], rhs)
switch.setup_switch(gpio.Pswitch_, gpio.Pmqtt, config)
def to_code(config):
pin = None
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_esp8266_pwm_output(pin)
gpio = Pvariable(config[CONF_ID], rhs)
output.setup_output_platform(gpio, config)
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_status_led(pin)
var = Pvariable(config[CONF_ID], rhs)
setup_component(var, config)
def to_code(config):
for conf in config:
rhs = App.make_power_supply(gpio_output_pin_expression(conf[CONF_PIN]))
psu = Pvariable(PowerSupplyComponent, conf[CONF_ID], rhs)
if CONF_ENABLE_TIME in conf:
add(psu.set_enable_time(conf[CONF_ENABLE_TIME]))
if CONF_KEEP_ON_TIME in conf:
add(psu.set_keep_on_time(conf[CONF_KEEP_ON_TIME]))
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_switch(config[CONF_NAME], pin)
make = variable(config[CONF_MAKE_ID], rhs)
gpio = make.Pswitch_
switch.setup_switch(gpio, make.Pmqtt, config)
setup_component(gpio, config)
def to_code(config):
for conf in config:
di = None
for di in gpio_output_pin_expression(conf[CONF_DATA_PIN]):
yield
dcki = None
for dcki in gpio_output_pin_expression(conf[CONF_CLOCK_PIN]):
yield
rhs = App.make_my9231_component(di, dcki)
my9231 = Pvariable(conf[CONF_ID], rhs)
if CONF_NUM_CHANNELS in conf:
add(my9231.set_num_channels(conf[CONF_NUM_CHANNELS]))
if CONF_NUM_CHIPS in conf:
add(my9231.set_num_chips(conf[CONF_NUM_CHIPS]))
if CONF_BIT_DEPTH in conf:
add(my9231.set_bit_depth(conf[CONF_BIT_DEPTH]))
if CONF_UPDATE_ON_BOOT in conf:
add(my9231.set_update(conf[CONF_UPDATE_ON_BOOT]))
setup_component(my9231, conf)
def to_code(config):
for conf in config:
pin = None
for pin in gpio_output_pin_expression(conf[CONF_PIN]):
yield
rhs = App.make_power_supply(pin)
psu = Pvariable(conf[CONF_ID], rhs)
if CONF_ENABLE_TIME in conf:
add(psu.set_enable_time(conf[CONF_ENABLE_TIME]))
if CONF_KEEP_ON_TIME in conf:
add(psu.set_keep_on_time(conf[CONF_KEEP_ON_TIME]))
def to_code(config):
for spi_ in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
rhs = App.make_max6675_sensor(config[CONF_NAME], spi_, cs,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
max6675 = make.Pmax6675
sensor.setup_sensor(max6675, make.Pmqtt, config)
setup_component(max6675, config)
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_esp8266_pwm_output(pin)
gpio = Pvariable(config[CONF_ID], rhs)
if CONF_FREQUENCY in config:
add(gpio.set_frequency(config[CONF_FREQUENCY]))
output.setup_output_platform(gpio, config)
setup_component(gpio, config)
def to_code(config):
pin = None
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_switch(config[CONF_NAME], pin)
gpio = variable(config[CONF_MAKE_ID], rhs)
if CONF_POWER_ON_VALUE in config:
add(gpio.Pswitch_.set_power_on_value(config[CONF_POWER_ON_VALUE]))
switch.setup_switch(gpio.Pswitch_, gpio.Pmqtt, config)
def to_code(config):
for conf in config:
pin = None
for pin in gpio_output_pin_expression(conf[CONF_PIN]):
yield
rhs = App.make_remote_transmitter_component(pin)
transmitter = Pvariable(conf[CONF_ID], rhs)
if CONF_CARRIER_DUTY_PERCENT in conf:
add(
transmitter.set_carrier_duty_percent(
conf[CONF_CARRIER_DUTY_PERCENT]))
def to_code(config):
for spi in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
for dc in gpio_output_pin_expression(config[CONF_DC_PIN]):
yield
rhs = App.make_spi_ssd1306(spi, cs, dc)
ssd = Pvariable(config[CONF_ID], rhs)
add(ssd.set_model(MODELS[config[CONF_MODEL]]))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(ssd.set_reset_pin(reset))
if CONF_EXTERNAL_VCC in config:
add(ssd.set_external_vcc(config[CONF_EXTERNAL_VCC]))
display.setup_display(ssd, config)
def to_code(config):
trigger = gpio_output_pin_expression(config[CONF_TRIGGER_PIN])
echo = gpio_input_pin_expression(config[CONF_ECHO_PIN])
rhs = App.make_ultrasonic_sensor(config[CONF_NAME], trigger, echo,
config.get(CONF_UPDATE_INTERVAL))
make = variable(MakeUltrasonicSensor, config[CONF_MAKE_ID], rhs)
ultrasonic = make.Pultrasonic
if CONF_TIMEOUT_TIME in config:
add(ultrasonic.set_timeout_us(config[CONF_TIMEOUT_TIME]))
elif CONF_TIMEOUT_METER in config:
add(ultrasonic.set_timeout_m(config[CONF_TIMEOUT_METER]))
sensor.setup_sensor(ultrasonic, make.Pmqtt, config)
def to_code(config):
ssd = Pvariable(config[CONF_ID], App.make_i2c_ssd1306())
add(ssd.set_model(ssd1306_spi.MODELS[config[CONF_MODEL]]))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(ssd.set_reset_pin(reset))
if CONF_EXTERNAL_VCC in config:
add(ssd.set_external_vcc(config[CONF_EXTERNAL_VCC]))
if CONF_ADDRESS in config:
add(ssd.set_address(config[CONF_ADDRESS]))
display.setup_display(ssd, config)
def to_code(config):
for conf in config:
spi = None
for spi in get_variable(conf[CONF_SPI_ID]):
yield
cs = None
for cs in gpio_output_pin_expression(conf[CONF_CS_PIN]):
yield
rhs = App.make_pn532_component(spi, cs, conf.get(CONF_UPDATE_INTERVAL))
pn532 = Pvariable(conf[CONF_ID], rhs)
for conf_ in conf.get(CONF_ON_TAG, []):
trigger = Pvariable(conf_[CONF_TRIGGER_ID], pn532.make_trigger())
automation.build_automation(trigger, std_string, conf_)
def to_code(config):
pin = gpio_output_pin_expression(config[CONF_PIN])
rhs = App.make_dht_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
dht = variable(MakeDHTSensor, config[CONF_MAKE_ID], rhs)
if CONF_MODEL in config:
constant = DHT_MODELS[config[CONF_MODEL]]
add(dht.Pdht.set_dht_model(constant))
sensor.setup_sensor(dht.Pdht.Pget_temperature_sensor(),
dht.Pmqtt_temperature, config[CONF_TEMPERATURE])
sensor.setup_sensor(dht.Pdht.Pget_humidity_sensor(), dht.Pmqtt_humidity,
config[CONF_HUMIDITY])
def to_code(config):
for conf in config:
clk = None
for clk in gpio_output_pin_expression(conf[CONF_CLK_PIN]):
yield
rhs = App.init_spi(clk)
spi = Pvariable(conf[CONF_ID], rhs)
if CONF_MISO_PIN in conf:
for miso in gpio_input_pin_expression(conf[CONF_MISO_PIN]):
yield
add(spi.set_miso(miso))
if CONF_MOSI_PIN in conf:
for mosi in gpio_input_pin_expression(conf[CONF_MOSI_PIN]):
yield
add(spi.set_mosi(mosi))
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_dht_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
dht = make.Pdht
Pvariable(config[CONF_ID], dht)
if CONF_MODEL in config:
constant = DHT_MODELS[config[CONF_MODEL]]
add(dht.set_dht_model(constant))
sensor.setup_sensor(dht.Pget_temperature_sensor(), make.Pmqtt_temperature,
config[CONF_TEMPERATURE])
sensor.setup_sensor(dht.Pget_humidity_sensor(), make.Pmqtt_humidity,
config[CONF_HUMIDITY])
setup_component(dht, config)
def to_code(config):
ssd = Pvariable(config[CONF_ID], App.make_i2c_ssd1306())
add(ssd.set_model(ssd1306_spi.MODELS[config[CONF_MODEL]]))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(ssd.set_reset_pin(reset))
if CONF_EXTERNAL_VCC in config:
add(ssd.set_external_vcc(config[CONF_EXTERNAL_VCC]))
if CONF_ADDRESS in config:
add(ssd.set_address(config[CONF_ADDRESS]))
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(display.DisplayBufferRef, 'it')]):
yield
add(ssd.set_writer(lambda_))
display.setup_display(ssd, config)
def to_code(config):
for spi in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
rhs = App.make_max7219(spi, cs)
max7219 = Pvariable(config[CONF_ID], rhs)
if CONF_NUM_CHIPS in config:
add(max7219.set_num_chips(config[CONF_NUM_CHIPS]))
if CONF_INTENSITY in config:
add(max7219.set_intensity(config[CONF_INTENSITY]))
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(MAX7219ComponentRef, 'it')]):
yield
add(max7219.set_writer(lambda_))
display.setup_display(max7219, config)
def to_code(config):
sel = None
for sel in gpio_output_pin_expression(config[CONF_SEL_PIN]):
yield
rhs = App.make_hlw8012(sel, config[CONF_CF_PIN], config[CONF_CF1_PIN],
config.get(CONF_UPDATE_INTERVAL))
hlw = Pvariable(config[CONF_ID], rhs)
if CONF_VOLTAGE in config:
conf = config[CONF_VOLTAGE]
sensor.register_sensor(hlw.make_voltage_sensor(conf[CONF_NAME]), conf)
if CONF_CURRENT in config:
conf = config[CONF_CURRENT]
sensor.register_sensor(hlw.make_current_sensor(conf[CONF_NAME]), conf)
if CONF_POWER in config:
conf = config[CONF_POWER]
sensor.register_sensor(hlw.make_power_sensor(conf[CONF_NAME]), conf)
if CONF_CURRENT_RESISTOR in config:
add(hlw.set_current_resistor(config[CONF_CURRENT_RESISTOR]))
if CONF_CHANGE_MODE_EVERY in config:
add(hlw.set_change_mode_every(config[CONF_CHANGE_MODE_EVERY]))
def to_code(config):
pin = gpio_output_pin_expression(config[CONF_PIN])
rhs = App.make_gpio_output(pin)
gpio = Pvariable(GPIOBinaryOutputComponent, config[CONF_ID], rhs)
output.setup_output_platform(gpio, config)
def to_code(config):
pin = None
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_status_led(pin)
Pvariable(config[CONF_ID], rhs)