def test_mini_world_geography_based_mock_data(self):
"""Testing on a simple mock data file, with mock covariate values"""
# GENERATING OBSERVATIONS
# Simulated locations: they will exactly sits on the grid points of the covariate datafile
locations = numpy.array([[0.0, 0.0], [0.0, 0.5], [0.05, 0.0]])
# Simulated measurements: simple linear relation of type: y = 2*x
measurement = numpy.array([2., 2., 2.])
# Simulated errors
uncorrelatederror = 0.1 * numpy.ones(measurement.shape)
# Simulated inputs
simulated_input_loader = SimulatedInputLoader(locations, measurement,
uncorrelatederror)
# Simulate evaluation of this time index
simulated_time_indices = [0]
# GENERATING THE MODEL
# Local component
geography_covariate_element = GeographyBasedElement(
self.covariate_file.name, 'lat', 'lon', 'covariate', 1.0)
geography_covariate_element.load()
geography_based_component = SpatialComponent(
ComponentStorage_InMemory(
geography_covariate_element,
CovariateHyperparameters(-0.5 * numpy.log(10.))),
SpatialComponentSolutionStorage_InMemory())
# GENERATING THE ANALYSIS
# Analysis system using the specified components, for the Tmean observable
analysis_system = AnalysisSystem([geography_based_component],
ObservationSource.TMEAN,
log=StringIO())
# Update with data
analysis_system.update([simulated_input_loader],
simulated_time_indices)
# Check state vector directly
statevector = analysis_system.components[
0].solutionstorage.partial_state_read(0).ravel()
# These are the nodes where observations were put (see SimulatedObservationSource above)
# - check they correspond to within 3 times the stated noise level
self.assertAlmostEqual(2., statevector[0], delta=0.3)
# Also check entire state vector within outer bounds set by obs
self.assertTrue(all(statevector < 2.0))
# And check output corresponds too
# (evaluate result on output structure same as input)
simulated_output_structure = SimulatedObservationStructure(
0, locations, None, None)
result = analysis_system.evaluate_expected_value(
'MAP', simulated_output_structure, flag='POINTWISE')
numpy.testing.assert_almost_equal(
statevector[0] * numpy.ones(len(measurement)), result)
def test_Altitude_Covariate(self):
altitude_element = GeographyBasedElement(self.altitude_datafile, 'lat',
'lon', 'dem', 1.0)
altitude_element.load()
numpy.testing.assert_array_equal(-89.875, altitude_element.latitude[0,
0])
numpy.testing.assert_array_equal(-84.875, altitude_element.latitude[20,
0])
numpy.testing.assert_array_equal(-89.875,
altitude_element.latitude[0, 10])
numpy.testing.assert_array_equal(-84.875,
altitude_element.latitude[20, 10])
numpy.testing.assert_array_equal(-179.875,
altitude_element.longitude[0, 0])
numpy.testing.assert_array_equal(-179.875,
altitude_element.longitude[20, 0])
numpy.testing.assert_array_equal(-177.375,
altitude_element.longitude[0, 10])
numpy.testing.assert_array_equal(-177.375,
altitude_element.longitude[20, 10])
numpy.testing.assert_array_equal(2779, altitude_element.covariate[0,
0])
numpy.testing.assert_array_equal(2861, altitude_element.covariate[1,
1])
design = altitude_element.element_design(
TestRealCovariate.SimulatedObservationStructureAltitude())
altitude_design = design.design_matrix()
numpy.testing.assert_almost_equal(
numpy.array([2779, 2861, 2820, 2860.344]).reshape(-1, 1),
altitude_design.todense())
def test_load(self):
a = GeographyBasedElement(self.covariate_file.name, 'lat', 'lon',
'covariate', 1.0)
a.load()
for original_array, file_array, name in zip(
[self.latitude, self.longitude, self.covariate],
[a.latitude, a.longitude, a.covariate],
['latitude', 'longitude', 'covariate']):
numpy.testing.assert_array_equal(original_array,
file_array,
err_msg="Testing vaues of " +
name + " array")
def test_element_design(self):
geography = GeographyBasedElement(self.covariate_file.name, 'lat',
'lon', 'covariate', 1.0)
geography.load()
design = geography.element_design(SimulatedObservationStructure())
self.assertTrue(isinstance(design, GeographyBasedElementDesign))
self.assertTrue(
isinstance(design.function_class, GeographyBasedCovariateFunction))
for original_array, file_array, name in zip(
[self.latitude, self.longitude, self.covariate], [
design.function_class.latitude,
design.function_class.longitude,
design.function_class.covariate
], ['latitude', 'longitude', 'covariate']):
numpy.testing.assert_array_equal(original_array,
file_array,
err_msg="Testing vaues of " +
name + " array")
self.assertEqual(design.design_number_of_state_parameters(),
GeographyBasedElement.NUMBER_OF_STATE_PARAMETERS)
def test_CoastalInfluence_Covariate(self):
coastalinfluence_element = GeographyBasedElement(
self.coastal_influence_datafile, 'lat', 'lon', 'coastal_influence',
1.0)
coastalinfluence_element.load()
numpy.testing.assert_array_equal(
-89.875, coastalinfluence_element.latitude[0, 0])
numpy.testing.assert_array_equal(
-84.875, coastalinfluence_element.latitude[20, 0])
numpy.testing.assert_array_equal(
-89.875, coastalinfluence_element.latitude[0, 10])
numpy.testing.assert_array_equal(
-84.875, coastalinfluence_element.latitude[20, 10])
numpy.testing.assert_array_equal(
-179.875, coastalinfluence_element.longitude[0, 0])
numpy.testing.assert_array_equal(
-179.875, coastalinfluence_element.longitude[20, 0])
numpy.testing.assert_array_equal(
-177.375, coastalinfluence_element.longitude[0, 10])
numpy.testing.assert_array_equal(
-177.375, coastalinfluence_element.longitude[20, 10])
numpy.testing.assert_array_almost_equal(
2.6666667, coastalinfluence_element.covariate[19, 82])
numpy.testing.assert_array_almost_equal(
100.0, coastalinfluence_element.covariate[20, 83])
design = coastalinfluence_element.element_design(
TestRealCovariate.SimulatedObservationStructureCoastalInfluence())
coastalinfluence_design = design.design_matrix()
numpy.testing.assert_almost_equal(
numpy.array([2.6666667, 14.9382706, 100.0,
55.604321]).reshape(-1, 1),
coastalinfluence_design.todense())
def test_mini_world_altitude_with_latitude(self):
"""Testing using altitude as a covariate"""
# GENERATING OBSERVATIONS
# Simulated locations: they will exactly sits on the grid points of the covariate datafile
DEM = Dataset(self.altitude_datafile)
latitude = DEM.variables['lat'][:]
longitude = DEM.variables['lon'][:]
altitude = DEM.variables['dem'][:]
indices = numpy.stack(
(numpy.array([1, 3, 5, 7, 8, 9, 10, 11
]), numpy.array([0, 0, 0, 0, 0, 0, 0, 0])),
axis=1)
selected_location = []
altitude_observations = []
for couple in indices:
selected_location.append([
latitude[couple[0], couple[1]], longitude[couple[0], couple[1]]
])
altitude_observations.append(altitude[couple[0], couple[1]])
DEM.close()
locations = numpy.array(selected_location)
# Simulated model is y = z + a*cos(2x) + c*cos(4*x) + b*sin(2x) + d*sin(4*x), with z = altitude, x = latitude, a=b=c=d=0
slope = 1e-3
measurement = slope * numpy.array(altitude_observations)
# Simulated errors
uncorrelatederror = 0.1 * numpy.ones(measurement.shape)
# Simulated inputs
simulated_input_loader = SimulatedInputLoader(locations, measurement,
uncorrelatederror)
# Simulate evaluation of this time index
simulated_time_indices = [0]
# GENERATING THE MODEL
# Local component
geography_covariate_element = GeographyBasedElement(
self.altitude_datafile, 'lat', 'lon', 'dem', 1.0)
geography_covariate_element.load()
combined_element = CombinationElement(
[geography_covariate_element,
LatitudeHarmonicsElement()])
combined_hyperparamters = CombinationHyperparameters([
CovariateHyperparameters(-0.5 * numpy.log(10.)),
CombinationHyperparameters([
CovariateHyperparameters(-0.5 * numpy.log(p))
for p in [10.0, 10.0, 10.0, 10.0]
])
])
combined_component = SpatialComponent(
ComponentStorage_InMemory(combined_element,
combined_hyperparamters),
SpatialComponentSolutionStorage_InMemory())
# GENERATING THE ANALYSIS
# Analysis system using the specified components, for the Tmean observable
analysis_system = AnalysisSystem([combined_component],
ObservationSource.TMEAN,
log=StringIO())
# Update with data
analysis_system.update([simulated_input_loader],
simulated_time_indices)
# Check state vector directly
statevector = analysis_system.components[
0].solutionstorage.partial_state_read(0).ravel()
# These are the nodes where observations were put (see SimulatedObservationSource above)
# - check they correspond to within 3 times the stated noise level
self.assertAlmostEqual(slope, statevector[0], delta=0.3)
self.assertAlmostEqual(0., statevector[1], delta=0.3)
self.assertAlmostEqual(0., statevector[2], delta=0.3)
self.assertAlmostEqual(0., statevector[3], delta=0.3)
self.assertAlmostEqual(0., statevector[4], delta=0.3)
# And check output corresponds too
# (evaluate result on output structure same as input)
simulated_output_structure = SimulatedObservationStructure(
0, locations, None, None)
result = analysis_system.evaluate_expected_value(
'MAP', simulated_output_structure, flag='POINTWISE')
expected = statevector[0]*numpy.array(altitude_observations)\
+ statevector[1]*LatitudeFunction(numpy.cos, 2.0).compute(locations[:,0]).ravel()\
+ statevector[2]*LatitudeFunction(numpy.sin, 2.0).compute(locations[:,0]).ravel()\
+ statevector[3]*LatitudeFunction(numpy.cos, 4.0).compute(locations[:,0]).ravel()\
+ statevector[4]*LatitudeFunction(numpy.sin, 2.0).compute(locations[:,0]).ravel()
numpy.testing.assert_almost_equal(expected, result)
# test output gridding, pointwise limit
outputstructure = OutputRectilinearGridStructure(
2,
epoch_plus_days(2),
latitudes=numpy.linspace(-60., 60., num=5),
longitudes=numpy.linspace(-90., 90, num=10))
pointwise_result = analysis_system.evaluate_expected_value(
'MAP', outputstructure, 'POINTWISE')
pointwise_limit_result = analysis_system.evaluate_expected_value(
'MAP', outputstructure, 'GRID_CELL_AREA_AVERAGE', [1, 1], 10)
numpy.testing.assert_array_almost_equal(pointwise_result,
pointwise_limit_result)
def test_mini_world_altitude(self):
"""Testing using altitude as a covariate"""
# GENERATING OBSERVATIONS
# Simulated locations: they will exactly sits on the grid points of the covariate datafile
DEM = Dataset(self.altitude_datafile)
latitude = DEM.variables['lat'][:]
longitude = DEM.variables['lon'][:]
altitude = DEM.variables['dem'][:]
indices = numpy.stack(
(numpy.array([1, 3, 267, 80, 10, 215, 17, 120]),
numpy.array([2, 256, 9, 110, 290, 154, 34, 151])),
axis=1)
selected_location = []
altitude_observations = []
for couple in indices:
selected_location.append([
latitude[couple[0], couple[1]], longitude[couple[0], couple[1]]
])
altitude_observations.append(altitude[couple[0], couple[1]])
DEM.close()
locations = numpy.array(selected_location)
# Simulated measurements: simple linear relation of type: y = PI*x
measurement = numpy.pi * numpy.array(altitude_observations)
# Simulated errors
uncorrelatederror = 0.1 * numpy.ones(measurement.shape)
# Simulated inputs
simulated_input_loader = SimulatedInputLoader(locations, measurement,
uncorrelatederror)
# Simulate evaluation of this time index
simulated_time_indices = [0]
# GENERATING THE MODEL
# Local component
geography_covariate_element = GeographyBasedElement(
self.altitude_datafile, 'lat', 'lon', 'dem', 1.0)
geography_covariate_element.load()
geography_based_component = SpatialComponent(
ComponentStorage_InMemory(
geography_covariate_element,
CovariateHyperparameters(-0.5 * numpy.log(10.))),
SpatialComponentSolutionStorage_InMemory())
# GENERATING THE ANALYSIS
# Analysis system using the specified components, for the Tmean observable
analysis_system = AnalysisSystem([geography_based_component],
ObservationSource.TMEAN,
log=StringIO())
# Update with data
analysis_system.update([simulated_input_loader],
simulated_time_indices)
# Check state vector directly
statevector = analysis_system.components[
0].solutionstorage.partial_state_read(0).ravel()
# These are the nodes where observations were put (see SimulatedObservationSource above)
# - check they correspond to within 3 times the stated noise level
self.assertAlmostEqual(numpy.pi, statevector[0], delta=0.3)
# Also check entire state vector within outer bounds set by obs
self.assertTrue(all(statevector < numpy.pi))
# And check output corresponds too
# (evaluate result on output structure same as input)
simulated_output_structure = SimulatedObservationStructure(
0, locations, None, None)
result = analysis_system.evaluate_expected_value(
'MAP', simulated_output_structure, flag='POINTWISE')
numpy.testing.assert_almost_equal(
statevector[0] * numpy.array(altitude_observations), result)