class FEMB_TEST_SIMPLE(object):
def __init__(self,
datadir="data",
outlabel="simpleMeasurement",
wib=0,
fembNum=0):
#set internal variables
self.datadir = datadir
self.outlabel = outlabel + str("_femb_") + str(fembNum + 4 * wib)
self.outpathlabel = os.path.join(self.datadir, self.outlabel)
self.fembNum = int(fembNum)
print("Test type\t" + str(self.outlabel))
print("Data path\t" + str(datadir))
print("FEMB #\t" + str(self.fembNum))
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA(datadir)
#set appropriate packet size
self.write_data.femb.MAX_PACKET_SIZE = 9014
self.cppfr = CPP_FILE_RUNNER()
#set status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
#json output, note module version number defined here
self.jsondict = {'type': 'fembTest_simple'}
self.jsondict['version'] = '1.0'
self.jsondict['timestamp'] = str(self.write_data.date)
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("SIMPLE MEASUREMENT - CHECKING READOUT STATUS")
self.status_check_setup = 0
#make sure output directory exists
self.write_data.assure_filedir()
#check if register interface is working
print("Checking register interface")
regVal = self.femb_config.femb.read_reg(6)
if (regVal == None):
print(
"Error running test - FEMB register interface is not working.")
print(" Turn on or debug FEMB UDP readout.")
return
if (regVal < 0):
print(
"Error running test - FEMB register interface is not working.")
print(" Turn on or debug FEMB UDP readout.")
return
print("Read register 6, value = " + str(hex(regVal)))
#check that femb number is valid
if (int(self.fembNum) < 0) or (int(self.fembNum) >=
self.femb_config.NFEMBS):
print("Error running doFembTest - Invalid FEMB # specified.")
return
#DO NOT CONFIGURE, except to enable streaming
self.femb_config.wib_reg_enable()
self.femb_config.femb.write_reg(20, 3)
self.femb_config.femb.write_reg(20, 3)
time.sleep(0.001)
self.femb_config.femb.write_reg(20, 0)
self.femb_config.femb.write_reg(20, 0)
time.sleep(0.001)
# start streaming data from ASIC 0 in initialization
self.femb_config.femb.write_reg(7, 0x80000000)
self.femb_config.femb.write_reg(7, 0x80000000)
femb_asic = 0 & 0x0F
wib_asic = (((self.fembNum << 16) & 0x000F0000) +
((femb_asic << 8) & 0xFF00))
self.femb_config.femb.write_reg(7, wib_asic | 0x80000000)
self.femb_config.femb.write_reg(7, wib_asic | 0x80000000)
self.femb_config.femb.write_reg(7, wib_asic)
self.femb_config.femb.write_reg(7, wib_asic)
self.femb_config.selectFemb(self.fembNum)
#Enable Streaming
self.femb_config.femb.write_reg(9, 9)
self.femb_config.femb.write_reg(9, 9)
time.sleep(0.1)
#test firmware versions
if self.femb_config.checkFirmwareVersion() == False:
print(
'Error running doFembTest - Invalid firmware and/or register read error'
)
return
if self.femb_config.syncStatus != 0:
print('Error running doFembTest - ADC SYNC failed')
return
if self.femb_config.spiStatus != 0:
print('Error running doFembTest - ADC SPI failed')
return
#check if data streaming is working
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
if len(testData) == 0:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists(
'test_measurements/fembTest/code/parseBinaryFile'):
print('parseBinaryFile not found, run setup.sh')
return
print("SIMPLE MEASUREMENT - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print("Please run check_setup method before trying to take data")
return
if self.status_record_data == 1:
print(
"Data already recorded. Reset/restat GUI to begin a new measurement"
)
return
#MEASUREMENT SECTION
print("SIMPLE MEASUREMENT - RECORDING DATA")
#wait to make sure HS link is back on after check_setup
sleep(5)
self.femb_config.printParameters()
#setup output file and record data
self.write_data.filename = self.outlabel + ".bin"
print("Recording " + self.write_data.filename)
isOpen = self.write_data.open_file()
if isOpen == 0:
print(
"Error running doFembTest - Could not open output data file for writing, ending test"
)
subrun = 0
#record data
self.write_data.numpacketsrecord = 100
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
asicCh = 0
for asic in range(0, 8, 1):
self.femb_config.selectChannel(asic, asicCh)
self.write_data.record_data(subrun, asic, asicCh)
self.write_data.close_file()
print("SIMPLE MEASUREMENT - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Analysis already complete")
return
#ANALYSIS SECTION
print("SIMPLE MEASUREMENT - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run("test_measurements/fembTest/code/parseBinaryFile",
[self.write_data.data_file_path])
#run analysis program
parseBinaryFile = self.outpathlabel + "-parseBinaryFile.root"
call(["mv", "output_parseBinaryFile.root", parseBinaryFile])
self.cppfr.run(
"test_measurements/fembTest/code/processNtuple_simpleMeasurement",
[parseBinaryFile])
processNtupleFile = self.outpathlabel + "-processNtupleFile.root"
call([
"mv", "output_processNtuple_simpleMeasurement.root",
processNtupleFile
])
summaryPlot = self.outpathlabel + "-summaryPlot.png"
call(["mv", "summaryPlot_simpleMeasurement.png", summaryPlot])
print("SIMPLE MEASUREMENT - DONE ANALYZING AND SUMMARIZING DATA" +
"\n")
self.status_do_analysis = 1
def archive_results(self):
#if self.status_check_setup == 0 :
# print("Check setup status is 0, not archiving data")
# return
#if self.status_do_analysis == 0:
# print("Please analyze data before archiving results")
# return
if self.status_archive_results == 1:
print("Results already archived")
return
#ARCHIVE SECTION
print("SIMPLE MEASUREMENT - ARCHIVE")
#add summary variables to output
self.jsondict['femb'] = self.fembNum
self.jsondict['filedir'] = str(self.write_data.filedir)
self.jsondict['status_check_setup'] = str(self.status_check_setup)
self.jsondict['status_record_data'] = str(self.status_record_data)
self.jsondict['status_do_analysis'] = str(self.status_do_analysis)
self.jsondict['status_archive_results'] = str(1)
self.jsondict['syncStatus'] = str(self.femb_config.syncStatus)
#dump results into json
jsonFile = self.outpathlabel + "-results.json"
with open(jsonFile, 'w') as outfile:
json.dump(self.jsondict, outfile, indent=4)
print("SIMPLE MEASUREMENT - DONE ARCHIVING" + "\n")
self.status_archive_results = 1
class QUADADC_TEST_SIMPLE(object):
def __init__(self,
datadir="data",
outlabel="simpleMeasurement",
asicnum=0,
isCold=False):
#set internal variables
self.datadir = datadir
self.outlabel = outlabel + str("_asic_") + str(asicnum)
self.outpathlabel = os.path.join(self.datadir, self.outlabel)
self.asicnum = int(asicnum)
print("Test type\t" + str(self.outlabel))
print("Data path\t" + str(datadir))
print("ASIC socket #\t" + str(self.asicnum))
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA(datadir)
self.cppfr = CPP_FILE_RUNNER()
#set appropriate UDP packet size
self.write_data.femb.MAX_PACKET_SIZE = 8000 #should be larger than largest expected packet size
#set test module status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
self.isCold = isCold
#define json output
self.jsondict = {'type': 'quadAdcTest_simple'}
#self.jsondict['version'] = '1.0'
self.jsondict['timestamp'] = str(self.write_data.date)
self.jsondict['asicnum'] = str(self.asicnum)
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("SIMPLE MEASUREMENT - CHECKING READOUT STATUS")
self.status_check_setup = 0
#make sure output directory exists (should catch permissions issues etc)
isDir = self.write_data.assure_filedir()
if isDir == None:
print("Error running test - Output data directory note created.")
return
#check if register interface is working
print("Checking register interface")
regVal = self.femb_config.femb.read_reg(
self.femb_config.REG_FIRMWARE_VERSION)
if (regVal == None):
print("Error running test - register interface is not working.")
print(" Turn on or debug UDP readout.")
return
if (regVal < 0):
print("Error running test - register interface is not working.")
print(" Turn on or debug UDP readout.")
return
print("Read register 6, value = " + str(hex(regVal)))
#check for any problems in input variables
#check that input ASIC # is correct
if self.asicnum == None:
print(
"Error running test - Invalid ASIC socket # specified, ending test"
)
return
if (self.asicnum < 0) or (self.asicnum > self.femb_config.NASICS):
print(
"Error running test - Invalid ASIC socket # specified, ending test"
)
return
#initialize readout to known working state
#initialization may identify problem that cancels test
print("Initializing board")
initStatus = self.femb_config.initBoard()
if initStatus == False:
print(
"Error running test - Could not initialize board, ending test")
return
initStatus = self.femb_config.initAsic(self.asicnum)
if initStatus == False:
print(
"Error running test - Could not initialize ASIC, ending test")
return
#firmware version check should be done in initialize, otherwise do here
#if self.femb_config.checkFirmwareVersion() == False:
# print('Error running doFembTest - Invalid firmware and/or register read error')
# return
#check if data streaming is working, assume it's ON after board + ASIC initialize
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running test - board is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
if len(testData) == 0:
print("Error running test - board is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists(
'test_measurements/quadAdcTester/code/parseBinaryFile'):
print(
'Error running test - parseBinaryFile executable not found, run setup.sh'
)
return
if not self.cppfr.exists(
'test_measurements/quadAdcTester/code/processNtuple_simpleMeasurement'
):
print(
'Error running test - processNtuple_simpleMeasurement executable not found, run setup.sh'
)
return
#Setup is ok
print("SIMPLE MEASUREMENT - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print(
"Error running test - Please run check_setup method before trying to take data"
)
return
if self.status_record_data == 1:
print(
"Error running test - Data already recorded. Reset/restat GUI to begin a new measurement"
)
return
#MEASUREMENT SECTION
print("SIMPLE MEASUREMENT - RECORDING DATA")
#wait to make sure HS link is back on after check_setup function
sleep(1.)
#setup output file and record data
self.write_data.filename = self.outlabel + ".bin"
print("Recording " + self.write_data.filename)
isOpen = self.write_data.open_file()
if isOpen == 0:
print(
"Error running test - Could not open output data file for writing, ending test"
)
#record data
self.write_data.numpacketsrecord = 10
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
#loop over each ASIC, record some data
subrun = 0
asic = self.asicnum
asicCh = 0
self.femb_config.selectAsic(asic)
self.write_data.record_data(subrun, asic, asicCh)
self.write_data.close_file()
#Power off ASIC
#self.femb_config.turnOffAsics()
print("SIMPLE MEASUREMENT - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Error running test - Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Error running test - Analysis already complete")
return
#ANALYSIS SECTION
print("SIMPLE MEASUREMENT - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run("test_measurements/quadAdcTester/code/parseBinaryFile",
[self.write_data.data_file_path])
#check for parsed file here
if os.path.isfile("output_parseBinaryFile.root") == False:
print("Error running test - parsed data file not found.")
return
#run analysis program
parseBinaryFile = "output_parseBinaryFile.root"
self.cppfr.run(
"test_measurements/quadAdcTester/code/processNtuple_simpleMeasurement",
[parseBinaryFile])
#check for online analysis result files here
if os.path.isfile(
"output_processNtuple_simpleMeasurement.root") == False:
print("Error running test - parsed data file not found.")
return
#update output file names
parseBinaryFile = self.outpathlabel + "-parseBinaryFile.root"
call(["mv", "output_parseBinaryFile.root", parseBinaryFile])
processNtupleFile = self.outpathlabel + "-processNtupleFile.root"
call([
"mv", "output_processNtuple_simpleMeasurement.root",
processNtupleFile
])
summaryPlot = self.outpathlabel + "-summaryPlot.png"
call(["mv", "summaryPlot_simpleMeasurement.png", summaryPlot])
print("SIMPLE MEASUREMENT - DONE ANALYZING AND SUMMARIZING DATA" +
"\n")
self.status_do_analysis = 1
def archive_results(self):
#NOTE: GENERALLY ALLOW ARCHIVE PROCESS TO RUN EVEN IF OTHER STEPS FAIL
#if self.status_check_setup == 0 :
# print("Check setup status is 0, not archiving data")
# return
#if self.status_do_analysis == 0:
# print("Please analyze data before archiving results")
# return
if self.status_archive_results == 1:
print("Error running test - Results already archived")
return
#ARCHIVE SECTION
print("SIMPLE MEASUREMENT - ARCHIVE")
#add summary variables to output
self.jsondict['filedir'] = str(self.write_data.filedir)
self.jsondict['status_check_setup'] = str(self.status_check_setup)
self.jsondict['status_record_data'] = str(self.status_record_data)
self.jsondict['status_do_analysis'] = str(self.status_do_analysis)
self.jsondict['status_archive_results'] = str(1)
#dump results into json
jsonFile = self.outpathlabel + "-results.json"
with open(jsonFile, 'w') as outfile:
json.dump(self.jsondict, outfile, indent=4)
print("SIMPLE MEASUREMENT - DONE ARCHIVING" + "\n")
self.status_archive_results = 1
class FEMB_TEST_SIMPLE(object):
def __init__(self, datadir="data"):
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA(datadir)
#set appropriate packet size
self.write_data.femb.MAX_PACKET_SIZE = 8000
#set status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
self.cppfr = CPP_FILE_RUNNER()
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("SIMPLE MEASUREMENT - CHECKING READOUT STATUS")
self.status_check_setup = 0
self.write_data.assure_filedir()
#create data-taking directory
#print("doFembTest - creating data-taking directory : " + str( self.write_data.filedir ) )
#os.makedirs( str( self.write_data.filedir ) )
#if os.path.isdir( str( self.write_data.filedir ) ) == False:
# print("Error creating data-taking directory.")
# return
#check if register interface is working
print("Checking register interface")
regVal = self.femb_config.femb.read_reg(6)
if (regVal == None) or (regVal == -1):
print("Error running doFembTest - FEMB register interface is not working.")
print(" Turn on or debug FEMB UDP readout.")
return
print("Read register 6, value = " + str( hex( regVal ) ) )
#initialize FEMB to known state
print("Initializing board")
self.femb_config.initBoard()
#check if data streaming is working
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
#print(" This script will exit now")
#sys.exit(0)
return
if len(testData) == 0:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
#print(" This script will exit now")
#sys.exit(0)
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists('test_measurements/example_femb_test/parseBinaryFile'):
print('parseBinaryFile not found, run setup.sh')
#sys.exit(0)
return
print("SIMPLE MEASUREMENT - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print("Please run check_setup method before trying to take data")
return
if self.status_record_data == 1:
print("Data already recorded. Reset/restat GUI to begin a new measurement")
return
#MEASUREMENT SECTION
print("SIMPLE MEASUREMENT - RECORDING DATA")
#initialize FEMB configuration to known state
self.femb_config.feasicGain = 1 #4.7,7.8,14,25
self.femb_config.feasicShape = 2 #0.5,1,2,3
self.femb_config.feasicBaseline = 1 #0 = 200mV, 1 = 900mV
self.femb_config.feasicLeakage = 0 #0 = 500pA, 1 = 100pA
self.femb_config.feasicLeakagex10 = 1 #0 = x1, 1 = x10
self.femb_config.feasicBuf = 1 #0 = OFF, 1 = ON
self.femb_config.feasicAcdc = 0 #AC = 0, DC = 1
self.femb_config.feasicEnableTestInput = 1 #OFF = 0, ON = 1
self.femb_config.configFeAsic()
#disable pulser
self.femb_config.setDacPulser(0,0x0)
self.femb_config.setFpgaPulser(0,0x0)
self.femb_config.setExternalFpgaPulser(0,0x0)
self.femb_config.setInternalPulser(1,0x5)
#wait to make sure HS link is back on
#sleep(0.5)
#set output file
self.write_data.filename = "rawdata_simpleMeasurement_" + str(self.write_data.date) + ".bin"
print("Recording " + self.write_data.filename )
self.write_data.numpacketsrecord = 10
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
#setup output file and record data
isOpen = self.write_data.open_file()
if isOpen == 0 :
print( "Error running doFembTest - Could not open output data file for writing, ending test" )
subrun = 0
asicCh = 0
for asic in range(0,4,1):
for asicCh in range(0,16,1):
self.femb_config.selectChannel(asic,asicCh)
self.write_data.record_data(subrun, asic, asicCh)
self.write_data.close_file()
#turn off ASICs
self.femb_config.turnOffAsics()
print("SIMPLE MEASUREMENT - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Analysis already complete")
return
#ANALYSIS SECTION
print("SIMPLE MEASUREMENT - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run("test_measurements/feAsicTest/parseBinaryFile", [self.write_data.data_file_path])
#run analysis program
newName = "output_parseBinaryFile_" + self.write_data.filename + ".root"
newPath = os.path.join(self.write_data.filedir, newName)
call(["mv", "output_parseBinaryFile.root" , newPath])
self.cppfr.run("test_measurements/feAsicTest/processNtuple_simpleMeasurement", [newPath])
#move result to data directory
newName = "output_processNtuple_simpleMeasurement_" + self.write_data.filename + ".root"
newPath = os.path.join(self.write_data.filedir, newName)
call(["mv", "output_processNtuple_simpleMeasurement.root" , newPath ])
newName = "summaryPlot_" + self.write_data.filename + ".png"
newPath = os.path.join(self.write_data.filedir, newName)
call(["mv", "summaryPlot_simpleMeasurement.png" , newPath])
#summary plot
#print("SIMPLE MEASUREMENT - DISPLAYING SUMMARY PLOT, CLOSE PLOT TO CONTINUE")
call(["display",str( newPath ) ])
print("SIMPLE MEASUREMENT - DONE ANALYZING AND SUMMARIZING DATA" + "\n")
self.status_do_analysis = 1
def archive_results(self):
if self.status_do_analysis == 0:
print("Please analyze data before archiving results")
return
if self.status_archive_results == 1:
print("Results already archived")
return
#ARCHIVE SECTION
print("SIMPLE MEASUREMENT - STORE RESULTS IN DATABASE")
#placeholder
print("SIMPLE MEASUREMENT - DONE STORING RESULTS IN DATABASE" + "\n")
self.status_archive_results = 1
class FEMB_TEST_GAIN_FPGADAC(object):
def __init__(self, datadir="data", outlabel="gainMeasurement"):
self.outpathlabel = os.path.join(datadir, outlabel)
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA(datadir)
#set appropriate packet size
self.write_data.femb.MAX_PACKET_SIZE = 8000
#set status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
self.cppfr = CPP_FILE_RUNNER()
#misc variables
self.gain = 0
self.shape = 0
self.base = 0
#json output, note module version number defined here
self.jsondict = {'type':'quadFeAsic_gain_fpgadac'}
self.jsondict['version'] = '1.0'
self.jsondict['timestamp'] = str(self.write_data.date)
def reset(self):
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("GAIN MEASUREMENT FPGA DAC - CHECKING READOUT STATUS")
self.status_check_setup = 0
self.write_data.assure_filedir()
#check if register interface is working
print("Checking register interface")
regVal = self.write_data.femb.read_reg(5)
if (regVal == None) or (regVal == -1):
print("Error running doFembTest - FEMB register interface is not working.")
print(" Turn on or debug FEMB UDP readout.")
return
print("Read register 5, value = " + str( hex( regVal ) ) )
#initialize FEMB to known state
print("Initializing board")
self.femb_config.initBoard()
#check if data streaming is working
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
#print(" This script will exit now")
#sys.exit(0)
return
if len(testData) == 0:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
#print(" This script will exit now")
#sys.exit(0)
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists('test_measurements/example_femb_test/parseBinaryFile'):
print('parseBinaryFile not found, run setup.sh')
#sys.exit(0)
return
print("GAIN MEASUREMENT FPGA DAC - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print("Please run check_setup method before trying to take data")
return
if self.status_record_data == 1:
print("Data already recorded. Reset/restat GUI to begin a new measurement")
return
#MEASUREMENT SECTION
print("GAIN MEASUREMENT FPGA DAC - RECORDING DATA")
#initialize FEMB configuration to known state
print("FE ASIC Settings: Gain " + str(self.gain) + ", Shaping Time " + str(self.shape) + ", Baseline " + str(self.base) )
self.femb_config.feasicGain = self.gain
self.femb_config.feasicShape = self.shape
self.femb_config.feasicBaseline = self.base
self.femb_config.configFeAsic()
#disable pulser
self.femb_config.setInternalPulser(0,0x0)
self.femb_config.setDacPulser(0,0x0)
self.femb_config.setFpgaPulser(0,0x0)
#setup output file and record data
self.write_data.filename = self.outpathlabel+".bin"
print("Recording " + self.write_data.filename )
self.write_data.numpacketsrecord = 50
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
self.write_data.open_file()
#take initial noise data run
subrun = 0
for asic in range(0,4,1):
self.femb_config.turnOffAsics()
self.femb_config.turnOnAsic(asic)
time.sleep(5) # wait extra for power to settle
for asicCh in range(0,16,1):
self.femb_config.selectChannel(asic,asicCh)
self.write_data.record_data(subrun, asic, asicCh)
#turn ASICs back on, start pulser section
self.femb_config.feasicEnableTestInput = 1
self.femb_config.turnOnAsics()
subrun = 1
#loop over pulser configurations, each configuration is it's own subrun
#for p in range(1,2,1):
for p in range(1,0x3F,1):
pVal = int(p)
self.femb_config.setFpgaPulser(1,pVal)
print("Pulse amplitude " + str(pVal) )
#loop over channels
for asic in range(0,4,1):
for asicCh in range(0,16,1):
self.femb_config.selectChannel(asic,asicCh)
self.write_data.record_data(subrun, asic, asicCh)
#increment subrun, important
subrun = subrun + 1
#close file
self.write_data.close_file()
#turn off pulser
self.femb_config.setFpgaPulser(0,0)
#turn off ASICs
self.femb_config.turnOffAsics()
print("GAIN MEASUREMENT FPGA DAC - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Analysis already complete")
return
#ANALYSIS SECTION
print("GAIN MEASUREMENT FPGA DAC - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run("test_measurements/feAsicTest/parseBinaryFile", [self.write_data.data_file_path])
#run analysis program
parseBinaryFile = self.outpathlabel + "-parseBinaryFile.root"
call(["mv", "output_parseBinaryFile.root" , parseBinaryFile])
self.cppfr.run("test_measurements/feAsicTest/processNtuple_gainMeasurement_fpgadac", [parseBinaryFile])
processNtupleFile = self.outpathlabel + "-processNtupleFile.root"
call(["mv", "output_processNtuple_gainMeasurement_fpgadac.root" , processNtupleFile])
summaryPlot = self.outpathlabel + "-summaryPlot.png"
call(["mv", "summaryPlot_gainMeasurement_fpgadac.png" , summaryPlot])
resultsFile = self.outpathlabel + "-results.list"
call(["mv", "output_processNtuple_gainMeasurement_fpgadac.list" , resultsFile])
#summary plot
#print("GAIN MEASUREMENT - DISPLAYING SUMMARY PLOT, CLOSE PLOT TO CONTINUE")
#call(["display", newPath])
print("GAIN MEASUREMENT FPGA DAC - DONE ANALYZING AND SUMMARIZING DATA" + "\n")
self.status_do_analysis = 1
def archive_results(self):
#if self.status_do_analysis == 0:
# print("Please analyze data before archiving results")
# return
#if self.status_archive_results == 1:
# print("Results already archived")
# return
#ARCHIVE SECTION
print("GAIN MEASUREMENT FPGA DAC - ARCHIVE")
#add summary variables to output
self.jsondict['status_check_setup'] = str( self.status_check_setup )
self.jsondict['status_record_data'] = str( self.status_record_data )
self.jsondict['status_do_analysis'] = str( self.status_do_analysis )
self.jsondict['filedir'] = str( self.write_data.filedir )
self.jsondict['config_gain'] = str( self.gain )
self.jsondict['config_shape'] = str( self.shape )
self.jsondict['config_base'] = str( self.base )
if self.status_do_analysis == 1:
#parse the output results, kind of messy
listFile = self.outpathlabel + "-results.list"
lines = []
with open( listFile ) as infile:
for line in infile:
line = line.strip('\n')
line = line.split(',') #measurements separated by commas
parseline = {}
for n in range(0,len(line),1):
word = line[n].split(' ')
if( len(word) != 2 ):
continue
parseline[ str(word[0]) ] = str(word[1])
lines.append(parseline)
self.jsondict['results'] = lines
#dump results into json
jsonFile = self.outpathlabel + "-results.json"
with open( jsonFile , 'w') as outfile:
json.dump( self.jsondict, outfile, indent=4)
#get required results from dict to propagate to GUI
"""
asicStatus = []
if "results" in self.jsondict:
results = self.jsondict["results"]
for d in results:
if "asic" in d:
asicNum = d["asic"]
fail = d["fail"]
asicStatus.append( [asicNum,fail] )
"""
print("GAIN MEASUREMENT - DONE ARCHIVING" + "\n")
self.status_archive_results = 1
class FEMB_TEST(object):
def __init__(self):
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA()
#set appropriate packet size
self.write_data.femb.MAX_PACKET_SIZE = 8000
#set status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
self.fembNum = 0
self.cppfr = CPP_FILE_RUNNER()
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("SIMPLE MEASUREMENT - CHECKING READOUT STATUS")
self.status_check_setup = 0
#check local directory structure, available space
if os.path.isdir("./data") == False:
print("Error running doFembTest - data directory not found.")
print(
" Please check that femb_python package directory structure is intact."
)
return
#select femb
self.femb_config.selectFemb(self.fembNum)
#check if register interface is working
print("Checking register interface")
regVal = self.femb_config.femb.read_reg(5)
if (regVal == None) or (regVal == -1):
print(
"Error running doFembTest - FEMB register interface is not working."
)
print(" Turn on or debug FEMB UDP readout.")
return
print("Read register 5, value = " + str(hex(regVal)))
#for regNum in range (0,1024,1):
# regVal = self.femb_config.femb.read_reg(regNum)
# print(str(regNum) + "\t" + str( hex( regVal ) ) )
#initialize FEMB to known state
print("Initializing board")
self.femb_config.initFemb(self.fembNum)
#check if data streaming is working
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
#print(" This script will exit now")
#sys.exit(0)
return
if len(testData) == 0:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
#print(" This script will exit now")
#sys.exit(0)
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists(
'test_measurements/wibTestStand/parseBinaryFile'):
print('parseBinaryFile not found, run setup.sh')
#sys.exit(0)
return
print("SIMPLE MEASUREMENT - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print("Please run check_setup method before trying to take data")
return
if self.status_record_data == 1:
print(
"Data already recorded. Reset/restat GUI to begin a new measurement"
)
return
#MEASUREMENT SECTION
print("SIMPLE MEASUREMENT - RECORDING DATA")
#initialize FEMB configuration to known state
#self.femb_config.configFeAsic(0,0,0)
#wait to make sure HS link is back on
sleep(0.5)
#set output file
self.write_data.filedir = "data/"
self.write_data.filename = "rawdata_simpleMeasurement_" + str(
self.write_data.date) + ".bin"
print("Recording " + self.write_data.filename)
self.write_data.numpacketsrecord = 100
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
#setup output file and record data
self.write_data.open_file()
subrun = 0
asicCh = 0
for asic in range(0, 8, 1):
self.femb_config.selectChannel(asic, asicCh)
self.write_data.record_data(subrun, asic, asicCh)
self.write_data.close_file()
#reset configuration to known state
#self.femb_config.configFeAsic(0,0,0)
print("SIMPLE MEASUREMENT - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Analysis already complete")
return
#ANALYSIS SECTION
print("SIMPLE MEASUREMENT - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run(
'test_measurements/wibTestStand/parseBinaryFile',
[str(self.write_data.filedir) + str(self.write_data.filename)])
#run analysis program
newName = "output_parseBinaryFile_" + self.write_data.filename + ".root"
call([
"mv", "output_parseBinaryFile.root",
str(self.write_data.filedir) + str(newName)
])
self.cppfr.run(
"test_measurements/wibTestStand/processNtuple_simpleMeasurement",
[str(self.write_data.filedir) + str(newName)])
#move result to data directory
newName = "output_processNtuple_simpleMeasurement_" + self.write_data.filename + ".root"
call([
"mv", "output_processNtuple_simpleMeasurement.root",
str(self.write_data.filedir) + str(newName)
])
newName = "summaryPlot_" + self.write_data.filename + ".png"
call([
"mv", "summaryPlot_simpleMeasurement.png",
str(self.write_data.filedir) + str(newName)
])
#summary plot
print(
"SIMPLE MEASUREMENT - DISPLAYING SUMMARY PLOT, CLOSE PLOT TO CONTINUE"
)
call(["display", str(self.write_data.filedir) + str(newName)])
print("SIMPLE MEASUREMENT - DONE ANALYZING AND SUMMARIZING DATA" +
"\n")
self.status_do_analysis = 1
def archive_results(self):
if self.status_do_analysis == 0:
print("Please analyze data before archiving results")
return
if self.status_archive_results == 1:
print("Results already archived")
return
#ARCHIVE SECTION
print("SIMPLE MEASUREMENT - STORE RESULTS IN DATABASE")
#placeholder
print("SIMPLE MEASUREMENT - DONE STORING RESULTS IN DATABASE" + "\n")
self.status_archive_results = 1
class FEMB_TEST_GAIN(object):
def __init__(self, datadir="data", outlabel="gainMeasurement",fembNum=0):
#set internal variables
self.datadir = datadir
self.outlabel = outlabel + str("_femb_") + str(fembNum)
self.outpathlabel = os.path.join(self.datadir, self.outlabel)
self.fembNum = int(fembNum)
print( "FEMB # " + str(fembNum) )
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA(self.datadir)
#set appropriate packet size
self.write_data.femb.MAX_PACKET_SIZE = 8000
self.cppfr = CPP_FILE_RUNNER()
#set status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
#misc variables
self.gain = 0
self.shape = 0
self.base = 0
self.leakage = 0
self.leakagex10 = 0
self.buffer = 0
self.acdc = 0
self.useInternalPulser = False
self.useExtAdcClock = False
self.isRoomTemp = False
#json output, note module version number defined here
self.jsondict = {'type':'fembTest_gain'}
self.jsondict['version'] = '1.0'
self.jsondict['timestamp'] = str(self.write_data.date)
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("GAIN MEASUREMENT - CHECKING READOUT STATUS")
self.status_check_setup = 0
#make sure output directory exists
self.write_data.assure_filedir()
#check if register interface is working
print("Checking register interface")
regVal = self.femb_config.femb.read_reg(6)
if (regVal == None):
print("Error running doFembTest - FEMB register interface is not working.")
print(" Turn on or debug FEMB UDP readout.")
return
if ( regVal < 0 ):
print("Error running doFembTest - FEMB register interface is not working.")
print(" Turn on or debug FEMB UDP readout.")
return
print("Read register 6, value = " + str( hex( regVal ) ) )
#check that femb number is valid
if ( int(self.fembNum) < 0 ) or ( int( self.fembNum) >= self.femb_config.NFEMBS ):
print("Error running doFembTest - Invalid FEMB # specified.")
return
#assign FEMB # to test
self.femb_config.selectFemb(self.fembNum)
#initialize FEMB to known state
print("Initializing board")
self.femb_config.feasicGain = self.gain
self.femb_config.feasicShape = self.shape
self.femb_config.feasicBaseline = self.base
self.femb_config.feasicLeakageVal = self.leakage
self.femb_config.feasicLeakagex10Val = self.leakagex10
self.femb_config.bufVal = self.buffer
self.femb_config.acdcVal = self.acdc
self.femb_config.feasicEnableTestInput = 0 #important
self.femb_config.useExtAdcClock = self.useExtAdcClock
self.femb_config.isRoomTemp = self.isRoomTemp
#self.femb_config.printParameters()
self.femb_config.initFemb()
#test firmware versions
if self.femb_config.checkFirmwareVersion() == False:
print('Error running doFembTest - Invalid firmware and/or register read error')
return
#check if data streaming is working
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
if len(testData) == 0:
print("Error running doFembTest - FEMB is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists('test_measurements/fembTest/code/parseBinaryFile'):
print('parseBinaryFile not found, run setup.sh')
return
print("GAIN MEASUREMENT - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print("Please run check_setup method before trying to take data")
return
if self.status_record_data == 1:
print("Data already recorded. Reset/restat GUI to begin a new measurement")
return
#MEASUREMENT SECTION
print("GAIN MEASUREMENT - RECORDING DATA")
#wait to make sure HS link is back on after check_setup
sleep(5)
#setup output file
self.write_data.filename = self.outlabel+".bin"
print("Recording " + self.write_data.filename )
isOpen = self.write_data.open_file()
if isOpen == 0 :
print( "Error running doFembTest - Could not open output data file for writing, ending test" )
subrun = 0
#config FE ASICs
print("FE ASIC Settings: Gain " + str(self.gain) + ", Shaping Time " + str(self.shape) + ", Baseline " + str(self.base) )
print("FE ASIC Settings: Leakage Current " + str(self.leakage) + ", Leakage x10 " + str(self.leakagex10) )
print("FE ASIC Settings: Output Buffer " + str(self.buffer) + ", AC/DC " + str(self.acdc) )
self.femb_config.feasicGain = self.gain
self.femb_config.feasicShape = self.shape
self.femb_config.feasicBaseline = self.base
self.femb_config.feasicLeakageVal = self.leakage
self.femb_config.feasicLeakagex10Val = self.leakagex10
self.femb_config.bufVal = self.buffer
self.femb_config.acdcVal = self.acdc
self.femb_config.feasicEnableTestInput = 0 #important
self.femb_config.useExtAdcClock = self.useExtAdcClock
self.femb_config.isRoomTemp = self.isRoomTemp
self.femb_config.configFeAsic()
#disable pulsers
self.femb_config.setInternalPulser(0,0x0)
self.femb_config.setFpgaPulser(0,0x0)
self.femb_config.printParameters()
#record data
self.write_data.numpacketsrecord = 500
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
#take initial noise data run
subrun = 0
asicCh = 0
for asic in range(0,self.femb_config.NASICS,1):
self.femb_config.selectChannel(asic,asicCh)
self.write_data.record_data(subrun, asic, asicCh)
#turn ASIC test input on, start pulser section
self.femb_config.feasicEnableTestInput = 1
self.femb_config.configFeAsic()
if self.useInternalPulser == False :
self.femb_config.setFpgaPulser(1,0)
else:
self.femb_config.setInternalPulser(1,0)
subrun = 1
#loop over pulser configurations, each configuration is it's own subrun
for p in range(0,10,1):
pVal = int(p)
if self.useInternalPulser == False :
self.femb_config.setFpgaPulser(1,pVal)
else:
self.femb_config.setInternalPulser(1,pVal)
print("Pulse amplitude " + str(pVal) )
#loop over channels
for asic in range(0,8,1):
self.femb_config.selectChannel(asic,asicCh)
self.write_data.record_data(subrun, asic, asicCh)
#increment subrun, important
subrun = subrun + 1
#close file
self.write_data.close_file()
#turn off FEMB
self.femb_config.powerOffFemb(self.fembNum)
print("GAIN MEASUREMENT - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Analysis already complete")
return
#ANALYSIS SECTION
print("GAIN MEASUREMENT - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run("test_measurements/fembTest/code/parseBinaryFile", [self.write_data.data_file_path])
#run analysis program
parseBinaryFile = self.outpathlabel + "-parseBinaryFile.root"
call(["mv", "output_parseBinaryFile.root" , parseBinaryFile])
if self.useInternalPulser == False :
self.cppfr.run("test_measurements/fembTest/code/processNtuple_gainMeasurement", [parseBinaryFile])
else :
self.cppfr.run("test_measurements/fembTest/code/processNtuple_gainMeasurement", [parseBinaryFile,"1"])
processNtupleFile = self.outpathlabel + "-processNtupleFile.root"
call(["mv", "output_processNtuple_gainMeasurement.root" , processNtupleFile])
summaryPlot = self.outpathlabel + "-summaryPlot.png"
call(["mv", "summaryPlot_gainMeasurement.png" , summaryPlot])
resultsFile = self.outpathlabel + "-results.list"
call(["mv", "output_processNtuple_gainMeasurement.list" , resultsFile])
print("GAIN MEASUREMENT - DONE ANALYZING AND SUMMARIZING DATA" + "\n")
self.status_do_analysis = 1
def archive_results(self):
#if self.status_check_setup == 0 :
# print("Check setup status is 0, not archiving data")
# return
#if self.status_do_analysis == 0:
# print("Please analyze data before archiving results")
# return
if self.status_archive_results == 1:
print("Results already archived")
return
#ARCHIVE SECTION
print("GAIN MEASUREMENT - ARCHIVE")
#add summary variables to output
self.jsondict['status_check_setup'] = str(self.status_check_setup)
self.jsondict['status_record_data'] = str(self.status_record_data)
self.jsondict['status_do_analysis'] = str(self.status_do_analysis)
self.jsondict['status_archive_results'] = str(1)
self.jsondict['filedir'] = str(self.write_data.filedir )
self.jsondict['config_gain'] = str(self.gain)
self.jsondict['config_shape'] = str(self.shape)
self.jsondict['config_base'] = str(self.base)
self.jsondict['useInternalPulser'] = str(self.useInternalPulser)
self.jsondict['syncStatus'] = str(self.femb_config.syncStatus)
if self.status_do_analysis == 1:
#parse the output results, kind of messy
listFile = self.outpathlabel + "-results.list"
lines = []
with open( listFile ) as infile:
for line in infile:
line = line.strip('\n')
line = line.split(',') #measurements separated by commas
parseline = {}
for n in range(0,len(line),1):
word = line[n].split(' ')
if( len(word) != 2 ):
continue
parseline[ str(word[0]) ] = str(word[1])
lines.append(parseline)
self.jsondict['results'] = lines
#dump results into json
jsonFile = self.outpathlabel + "-results.json"
with open( jsonFile , 'w') as outfile:
json.dump( self.jsondict, outfile, indent=4)
print("GAIN MEASUREMENT - DONE STORING RESULTS IN DATABASE" + "\n")
self.status_archive_results = 1
class QUADADC_TEST_FUNCGEN(object):
def __init__(self,
datadir="data",
outlabel="funcgenMeasurement",
asicnum=0,
doReconfig=True,
isExternalClock=True,
is1MHzSAMPLERATE=True,
isCold=False):
#set internal variables
self.datadir = datadir
self.outlabel = outlabel + str("_asic_") + str(asicnum)
self.outpathlabel = os.path.join(self.datadir, self.outlabel)
self.asicnum = int(asicnum)
print("Test type\t" + str(self.outlabel))
print("Data path\t" + str(datadir))
print("ASIC socket #\t" + str(self.asicnum))
#import femb_udp modules from femb_udp package
self.femb_config = CONFIG()
self.write_data = WRITE_DATA(datadir)
self.cppfr = CPP_FILE_RUNNER()
self.funcgen = Keysight_33600A("/dev/usbtmc0",
1) #hardcoded to usbtmc0
#set appropriate UDP packet size
self.write_data.femb.MAX_PACKET_SIZE = 8000 #should be larger than largest expected packet size
#set test module status variables
self.status_check_setup = 0
self.status_record_data = 0
self.status_do_analysis = 0
self.status_archive_results = 0
#assign input to test and config module internal variables
self.doReconfig = doReconfig
self.isExternalClock = isExternalClock
self.is1MHzSAMPLERATE = is1MHzSAMPLERATE
self.isCold = isCold
self.femb_config.isExternalClock = self.isExternalClock #False = internal monostable, True = external
self.femb_config.is1MHzSAMPLERATE = self.is1MHzSAMPLERATE #False = 1MHz, True = 2MHz
self.femb_config.COLD = self.isCold
#define json output
self.jsondict = {'type': 'quadAdcTest_funcgen'}
#self.jsondict['version'] = '1.0'
self.jsondict['timestamp'] = str(self.write_data.date)
self.jsondict['asicnum'] = str(self.asicnum)
self.jsondict['doreconfig'] = str(self.doReconfig)
self.jsondict['extclock'] = str(self.isExternalClock)
self.jsondict['is1MHz'] = str(self.is1MHzSAMPLERATE)
self.jsondict['iscold'] = str(self.isCold)
def check_setup(self):
#CHECK STATUS AND INITIALIZATION
print("FUNCTION GENERATOR MEASUREMENT - CHECKING READOUT STATUS")
self.status_check_setup = 0
#make sure output directory exists (should catch permissions issues etc)
isDir = self.write_data.assure_filedir()
if isDir == None:
print("Error running test - Output data directory note created.")
return
#check if register interface is working
print("Checking register interface")
regVal = self.femb_config.femb.read_reg(
self.femb_config.REG_FIRMWARE_VERSION)
if (regVal == None):
print("Error running test - register interface is not working.")
print(" Turn on or debug UDP readout.")
return
if (regVal < 0):
print("Error running test - register interface is not working.")
print(" Turn on or debug UDP readout.")
return
print("Read register 6, value = " + str(hex(regVal)))
#check for any problems in input variables
#check that input ASIC # is correct
if self.asicnum == None:
print(
"Error running test - Invalid ASIC socket # specified, ending test"
)
return
if (self.asicnum < 0) or (self.asicnum > self.femb_config.NASICS):
print(
"Error running test - Invalid ASIC socket # specified, ending test"
)
return
#initialize readout to known working state
#initialization may identify problem that cancels test
if self.doReconfig == True:
print("Initializing board")
initStatus = self.femb_config.initBoard()
if initStatus == False:
print(
"Error running test - Could not initialize board, ending test"
)
return
initStatus = self.femb_config.initAsic(self.asicnum)
if initStatus == False:
print(
"Error running test - Could not initialize ASIC, ending test"
)
return
#firmware version check should be done in initialize, otherwise do here
#if self.femb_config.checkFirmwareVersion() == False:
# print('Error running doFembTest - Invalid firmware and/or register read error')
# return
#check if data streaming is working, assume it's ON after board + ASIC initialize
print("Checking data streaming")
testData = self.write_data.femb.get_data_packets(1)
if testData == None:
print("Error running test - board is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
if len(testData) == 0:
print("Error running test - board is not streaming data.")
print(" Turn on and initialize FEMB UDP readout.")
return
print("Received data packet " + str(len(testData[0])) + " bytes long")
#check for analysis executables
if not self.cppfr.exists(
'test_measurements/quadAdcTester/code/parseBinaryFile'):
print(
'Error running test - parseBinaryFile executable not found, run setup.sh'
)
return
#if not self.cppfr.exists('test_measurements/quadAdcTester/code/processNtuple_funcgenMeasurement'):
# print('Error running test - processNtuple_funcgenMeasurement executable not found, run setup.sh')
# return
#Setup is ok
print("FUNCTION GENERATOR MEASUREMENT - READOUT STATUS OK" + "\n")
self.status_check_setup = 1
def record_data(self):
if self.status_check_setup == 0:
print(
"Error running test - Please run check_setup method before trying to take data"
)
return
if self.status_record_data == 1:
print(
"Error running test - Data already recorded. Reset/restat GUI to begin a new measurement"
)
return
#MEASUREMENT SECTION
print("FUNCTION GENERATOR MEASUREMENT - RECORDING DATA")
#wait to make sure HS link is back on after check_setup function
sleep(1.)
#enable external signal input
self.femb_config.setFPGADac(0, 1, 0, 0) # write regs 4 and 5
#print config parameters just before data taking
self.femb_config.printParameters()
#data recording parameters
self.write_data.run = 0
self.write_data.runtype = 0
self.write_data.runversion = 0
#setup output file and record data
self.write_data.filename = self.outlabel + ".bin"
print("Recording " + self.write_data.filename)
isOpen = self.write_data.open_file()
if isOpen == 0:
print(
"Error running test - Could not open output data file for writing, ending test"
)
#speicify ASIC
asic = self.asicnum
asicCh = 0
self.femb_config.selectAsic(asic)
#initialize function generator parameters
xLow = -0.3
xHigh = 1.7
offsetV = (xLow + xHigh) * 0.5
amplitudeV = (xHigh - xLow) * 0.5
settlingTime = 0.1
#take a bunch of function generator data in sequence and stick it all in the same output file
#long ramp
subrun = 0
freq = 4
self.funcgen.startRamp(freq, xLow, xHigh)
sleep(settlingTime)
self.write_data.numpacketsrecord = 20000 #long
self.write_data.record_data(subrun, asic, asicCh)
#short ramp
subrun = subrun + 1
freq = 734
self.funcgen.startRamp(freq, xLow, xHigh)
sleep(settlingTime)
self.write_data.numpacketsrecord = 1600
self.write_data.record_data(subrun, asic, asicCh)
#DC [0.2,0.5,1.,1.6]
for dc in [0.2, 0.5, 1., 1.6]:
subrun = subrun + 1
self.funcgen.startDC(dc)
sleep(settlingTime)
self.write_data.numpacketsrecord = 160
self.write_data.record_data(subrun, asic, asicCh)
#SINE [6.2365e4,4.83587e5,9.515125e5]
for freq in [6.2365e4, 4.83587e5, 9.515125e5]:
subrun = subrun + 1
self.funcgen.startSin(freq, amplitudeV, offsetV)
sleep(settlingTime)
self.write_data.numpacketsrecord = 1600
self.write_data.record_data(subrun, asic, asicCh)
#done taking data
self.write_data.close_file()
#Power off ASIC
#self.femb_config.turnOffAsics()
#disable external signal input
self.femb_config.setFPGADac(0, 0, 0, 0) # write regs 4 and 5
#turn off function generator
sleep(1)
self.funcgen.stop()
sleep(1)
print("FUNCTION GENERATOR MEASUREMENT - DONE RECORDING DATA" + "\n")
self.status_record_data = 1
def do_analysis(self):
if self.status_record_data == 0:
print("Error running test - Please record data before analysis")
return
if self.status_do_analysis == 1:
print("Error running test - Analysis already complete")
return
#ANALYSIS SECTION
print(
"FUNCTION GENERATOR MEASUREMENT - ANALYZING AND SUMMARIZING DATA")
#parse binary
self.cppfr.run("test_measurements/quadAdcTester/code/parseBinaryFile",
[self.write_data.data_file_path])
#check for parsed file here
if os.path.isfile("output_parseBinaryFile.root") == False:
print("Error running test - parsed data file not found.")
return
#run analysis program
parseBinaryFile = "output_parseBinaryFile.root"
#self.cppfr.run("test_measurements/quadAdcTester/code/processNtuple_funcgenMeasurement", [parseBinaryFile])
#check for online analysis result files here
#if os.path.isfile( "output_processNtuple_funcgenMeasurement.root" ) == False:
# print("Error running test - parsed data file not found.")
# return
#update output file names
parseBinaryFile = self.outpathlabel + "-parseBinaryFile.root"
call(["mv", "output_parseBinaryFile.root", parseBinaryFile])
#processNtupleFile = self.outpathlabel + "-processNtupleFile.root"
#call(["mv", "output_processNtuple_funcgenMeasurement.root" , processNtupleFile])
#summaryPlot = self.outpathlabel + "-summaryPlot.png"
#call(["mv", "summaryPlot_funcgenMeasurement.png" , summaryPlot])
print(
"FUNCTION GENERATOR MEASUREMENT - DONE ANALYZING AND SUMMARIZING DATA"
+ "\n")
self.status_do_analysis = 1
def archive_results(self):
#NOTE: GENERALLY ALLOW ARCHIVE PROCESS TO RUN EVEN IF OTHER STEPS FAIL
#if self.status_check_setup == 0 :
# print("Check setup status is 0, not archiving data")
# return
#if self.status_do_analysis == 0:
# print("Please analyze data before archiving results")
# return
if self.status_archive_results == 1:
print("Error running test - Results already archived")
return
#ARCHIVE SECTION
print("FUNCTION GENERATOR MEASUREMENT - ARCHIVE")
#add summary variables to output
self.jsondict['filedir'] = str(self.write_data.filedir)
self.jsondict['status_check_setup'] = str(self.status_check_setup)
self.jsondict['status_record_data'] = str(self.status_record_data)
self.jsondict['status_do_analysis'] = str(self.status_do_analysis)
self.jsondict['status_archive_results'] = str(1)
#dump results into json
jsonFile = self.outpathlabel + "-results.json"
with open(jsonFile, 'w') as outfile:
json.dump(self.jsondict, outfile, indent=4)
print("FUNCTION GENERATOR MEASUREMENT - DONE ARCHIVING" + "\n")
self.status_archive_results = 1