def write_fb_target_abinitio(self, records):
""" Write a list of {'energy': xxx, 'molecule': xxx, 'name': xxx} records into a new target folder """
# prepare folder for writing
target_name = 'abinitio_bond_angles'
target_folder = os.path.join(self.out_folder, target_name)
os.mkdir(target_folder)
os.chdir(target_folder)
# load data into a fb Molecule
out_m = Molecule()
out_m.elem = self.m.elem.copy()
out_m.xyzs = []
out_m.qm_energies = []
out_m.comms = []
for record in records:
qcmol = record['molecule']
energy = record['energy']
name = record.get('name', 'created by FBTargetBuilder')
m = self.qc_molecule_to_fb_molecule(qcmol)
assert m.elem == out_m.elem, 'Elements list of resulting qcmol is not consistent with self.m'
# append geometry
out_m.xyzs.append(m.xyzs[0])
# append energy
out_m.qm_energies.append(energy)
# append name
out_m.comms.append(name)
# write output
print(
f"Writing {len(records)} frames into targets/abinitio_bond_angles/traj.xyz"
)
out_m.write('traj.xyz')
print(
f"Writing {len(records)} frames into targets/abinitio_bond_angles/qdata.txt"
)
out_m.write('qdata.txt')
def read_quantum():
Result = None
os.chdir('calcs')
for i in range(M.ns):
dnm = eval(formstr % i)
print("\rNow in directory %i" % i, end=' ')
if os.path.exists(dnm):
os.chdir(dnm)
if os.path.exists('qchem.out'):
Output = Molecule('qchem.out')
if os.path.exists('plot.esp'):
ESP = Molecule('plot.esp')
#print ESP.Data.keys()
Output.qm_espxyzs = list(ESP.qm_espxyzs)
Output.qm_espvals = list(ESP.qm_espvals)
#Output += Molecule('plot.esp')
if Result == None:
Result = Output
else:
Result += Output
else:
raise Exception("The output file %s doesn't exist." % os.path.abspath('qchem.out'))
os.chdir('..')
else:
raise Exception("The subdirectory %s doesn't exist." % os.path.abspath(dnm))
os.chdir('..')
return Result
def QChem_Dielectric_Energy(fnm,wq):
QCIn = Molecule(fnm)
for i in range(QCIn.na):
# Q-Chem crashes if it doesn't recognize the chemical element
if QCIn.Data['elem'][i] in ['M','L']:
QCIn.Data['elem'][i] = 'He'
CalcDir=os.path.splitext(fnm)[0]+".d"
GoInto(CalcDir)
digits = len(str(QCIn.ns))
for i in range(QCIn.ns):
sdir = "%%0%ii" % digits % i
GoInto(sdir)
QCIn.write("qchem.in",select=i)
queue_up(wq,"qchem40 qchem.in qchem.out",input_files=["qchem.in"],output_files=["qchem.out"],verbose=False)
Leave(sdir)
wq_wait(wq,verbose=False)
PCM_Energies = []
for i in range(QCIn.ns):
sdir = "%%0%ii" % digits % i
GoInto(sdir)
for line in open("qchem.out"):
if "PCM electrostatic energy" in line:
PCM_Energies.append(float(line.split()[-2]))
Leave(sdir)
Leave(CalcDir)
return np.array(PCM_Energies) * 2625.5
def QChem_Dielectric_Energy(fnm,wq):
QCIn = Molecule(fnm)
for i in range(QCIn.na):
# Q-Chem crashes if it doesn't recognize the chemical element
if QCIn.Data['elem'][i] in ['M','L']:
QCIn.Data['elem'][i] = 'He'
CalcDir=os.path.splitext(fnm)[0]+".d"
GoInto(CalcDir)
digits = len(str(QCIn.ns))
for i in range(QCIn.ns):
sdir = "%%0%ii" % digits % i
GoInto(sdir)
QCIn.write("qchem.in",select=i)
queue_up(wq,"qchem40 qchem.in qchem.out",input_files=["qchem.in"],output_files=["qchem.out"],verbose=False)
Leave(sdir)
wq_wait(wq,verbose=False)
PCM_Energies = []
for i in range(QCIn.ns):
sdir = "%%0%ii" % digits % i
GoInto(sdir)
for line in open("qchem.out"):
if "PCM electrostatic energy" in line:
PCM_Energies.append(float(line.split()[-2]))
Leave(sdir)
Leave(CalcDir)
return np.array(PCM_Energies) * 2625.5
def validate_qdata_file(self, filename):
os.chdir(self._folder)
self.qdata_filename = filename
if self.qdata_filename != 'qdata.txt':
return {'success': False, 'error': 'Only qdata.txt is recognized by ForceBalance. Please rename file to qdata.txt'}
assert hasattr(self, 'coords_filename'), 'self.coords_filename does not exist, validate coords file first'
try:
m = Molecule(self.coords_filename)
m1 = Molecule(self.qdata_filename)
if len(m1) != len(m):
ret = {'success': False, 'error': f'Number of frames {len(m1)} does not match coords file ({len(m)})'}
elif m1.na != m.na:
ret = {'success': False, 'error': f'Number of atoms ({m1.na}) does not match coords file ({m.na})'}
elif len(m1.qm_energies) != len(m):
ret = {'success': False, 'error': f'Number of qm eneriges ({len(m1.qm_energies)}) does not match number of frames ({len(m)})'}
ret = {
'success': True,
'n_energies': len(m1.qm_energies),
}
# gradiants are optional
if hasattr(m1, 'qm_grads'):
if len(m1.qm_grads) != len(m):
ret = {'success': False, 'error': f'Number of qm gradiants ({len(m1.qm_energies)}) does not match number of frames ({len(m)})'}
else:
ret['n_grads'] = len(m1.qm_grads)
except Exception as e:
print(e)
ret = {'success': False, 'error': str(e)}
return ret
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.leapcmd = onefile(kwargs.get('leapcmd'), 'leap', err=True)
self.absleap = os.path.abspath(self.leapcmd)
# Name of the molecule, currently just call it a default name.
self.mname = 'molecule'
if 'mol' in kwargs:
self.mol = kwargs['mol']
elif 'coords' in kwargs:
crdfile = onefile(kwargs.get('coords'), None, err=True)
self.mol = Molecule(crdfile, build_topology=False)
# AMBER has certain PDB requirements, so we will absolutely require one.
needpdb = True
# if hasattr(self, 'mol') and all([i in self.mol.Data.keys() for i in ["chain", "atomname", "resid", "resname", "elem"]]):
# needpdb = False
# Determine the PDB file name.
# If 'pdb' is provided to Engine initialization, it will be used to
# copy over topology information (chain, atomname etc.). If mol/coords
# is not provided, then it will also provide the coordinates.
pdbfnm = onefile(kwargs.get('pdb'),
'pdb' if needpdb else None,
err=needpdb)
if pdbfnm != None:
mpdb = Molecule(pdbfnm, build_topology=False)
if hasattr(self, 'mol'):
for i in ["chain", "atomname", "resid", "resname", "elem"]:
self.mol.Data[i] = mpdb.Data[i]
else:
self.mol = copy.deepcopy(mpdb)
self.abspdb = os.path.abspath(pdbfnm)
def main():
M = Molecule(argv[1])
tempfnm = argv[3] if len(argv) >= 4 else None
if tempfnm != None:
M.add_quantum(tempfnm)
print M.Data.keys()
M.write(argv[2])
def check_connectivity(bond_set, filename):
""" Check if the connectivity in the molecule file is consistent with geometry
Using force balance Molecule.build_bonds() for this first draft
This can be improved by OpenEye or other methods
"""
fbmol = Molecule(filename)
fbmol.build_bonds()
new_bonds = set(fbmol.bonds)
return bond_set == new_bonds
def __init__(self, molecule=None):
# molecule.py can not parse psi4 input yet, so we use self.load_psi4_input() as a walk around
if molecule is None:
# create a fake molecule
molecule = Molecule()
molecule.elem = ['H']
molecule.xyzs = [[[0, 0, 0]]]
super(Psi4, self).__init__(molecule)
self.threads = None
def __init__(self,options,tgt_opts,forcefield):
super(BindingEnergy,self).__init__(options,tgt_opts,forcefield)
self.set_option(None, None, 'inter_txt', os.path.join(self.tgtdir,tgt_opts['inter_txt']))
self.global_opts, self.sys_opts, self.inter_opts = parse_interactions(self.inter_txt)
# If the global option doesn't exist in the system / interaction, then it is copied over.
for opt in self.global_opts:
for sys in self.sys_opts:
if opt not in self.sys_opts[sys]:
self.sys_opts[sys][opt] = self.global_opts[opt]
for inter in self.inter_opts:
if opt not in self.inter_opts[inter]:
self.inter_opts[inter][opt] = self.global_opts[opt]
for inter in self.inter_opts:
if 'energy_unit' in self.inter_opts[inter] and self.inter_opts[inter]['energy_unit'].lower() not in ['kilocalorie_per_mole', 'kilocalories_per_mole']:
logger.error('Usage of physical units is has been removed, please provide all binding energies in kcal/mole\n')
raise RuntimeError
self.inter_opts[inter]['reference_physical'] = self.inter_opts[inter]['energy']
if tgt_opts['energy_denom'] == 0.0:
self.set_option(None, None, 'energy_denom', val=np.std(np.array([val['reference_physical'] for val in self.inter_opts.values()])))
else:
self.set_option(None, None, 'energy_denom', val=tgt_opts['energy_denom'])
self.set_option(None, None, 'rmsd_denom', val=tgt_opts['rmsd_denom'])
self.set_option(tgt_opts,'cauchy')
self.set_option(tgt_opts,'attenuate')
## LPW 2018-02-11: This is set to True if the target calculates
## a single-point property over several existing snapshots.
self.loop_over_snapshots = False
logger.info("The energy denominator is: %s\n" % str(self.energy_denom))
logger.info("The RMSD denominator is: %s\n" % str(self.rmsd_denom))
if self.cauchy:
logger.info("Each contribution to the interaction energy objective function will be scaled by 1.0 / ( denom**2 + reference**2 )\n")
if self.attenuate:
logger.error('attenuate and cauchy are mutually exclusive\n')
raise RuntimeError
elif self.attenuate:
logger.info("Repulsive interactions beyond energy_denom will be scaled by 1.0 / ( denom**2 + (reference-denom)**2 )\n")
## Build keyword dictionaries to pass to engine.
engine_args = OrderedDict(list(self.OptionDict.items()) + list(options.items()))
del engine_args['name']
## Create engine objects.
self.engines = OrderedDict()
for sysname,sysopt in self.sys_opts.items():
M = Molecule(os.path.join(self.root, self.tgtdir, sysopt['geometry']))
if 'select' in sysopt:
atomselect = np.array(uncommadash(sysopt['select']))
M = M.atom_select(atomselect)
if self.FF.rigid_water: M.rigid_water()
self.engines[sysname] = self.engine_(target=self, mol=M, name=sysname, tinker_key=os.path.join(sysopt['keyfile']), **engine_args)
def __init__(self, mol2_file, client_conf_file, scan_conf_file=None):
self.m = Molecule(mol2_file)
self.qc_mol = self.fb_molecule_to_qc_molecule(self.m)
# create a client from config file
self.client = ptl.FractalClient.from_file(client_conf_file)
# load scan config from scan_conf_file
self.scan_conf = self.load_scan_conf(scan_conf_file)
# create output folder
self.out_folder = os.path.realpath('targets')
if os.path.exists('targets'):
raise OSError(
"Folder targets/ already exist. Please delete the prevous one")
os.mkdir(self.out_folder)
def optimize(self, shot=0, method="newton", crit=1e-4):
""" Optimize the geometry and align the optimized geometry to the starting geometry. """
if os.path.exists("%s.xyz_2" % self.name):
os.unlink("%s.xyz_2" % self.name)
self.mol[shot].write("%s.xyz" % self.name, ftype="tinker")
if method == "newton":
if self.rigid:
optprog = "optrigid"
else:
optprog = "optimize"
elif method == "bfgs":
if self.rigid:
optprog = "minrigid"
else:
optprog = "minimize"
o = self.calltinker("%s %s.xyz %f" % (optprog, self.name, crit))
# Silently align the optimized geometry.
M12 = Molecule("%s.xyz" % self.name, ftype="tinker") + Molecule("%s.xyz_2" % self.name, ftype="tinker")
if not self.pbc:
M12.align(center=False)
M12[1].write("%s.xyz_2" % self.name, ftype="tinker")
rmsd = M12.ref_rmsd(0)[1]
cnvgd = 0
mode = 0
for line in o:
s = line.split()
if len(s) == 0:
continue
if "Optimally Conditioned Variable Metric Optimization" in line:
mode = 1
if "Limited Memory BFGS Quasi-Newton Optimization" in line:
mode = 1
if mode == 1 and isint(s[0]):
mode = 2
if mode == 2:
if isint(s[0]):
E = float(s[1])
else:
mode = 0
if "Normal Termination" in line:
cnvgd = 1
if not cnvgd:
for line in o:
logger.info(str(line) + "\n")
logger.info("The minimization did not converge in the geometry optimization - printout is above.\n")
return E, rmsd
def Energy_RMSD(systems):
tinkerhome = os.environ["TINKERPATH"]
f1 = open("runAna.sh", "w")
f2 = open("runMin.sh", "w")
i = 0
for sys_ in systems:
opts = systems[sys_]
optimize = (opts['optimize'] if 'optimize' in opts else False)
if not optimize:
if (i+1)%24 == 0:
cmd = "rm -f %s.out\n%s/analyze %s.xyz -k %s.key E > %s.out \n"%(sys_, os.environ["TINKERPATH"], sys_, sys_, sys_)
i += 1
else:
cmd = "rm -f %s.out\n%s/analyze %s.xyz -k %s.key E > %s.out & \n"%(sys_, os.environ["TINKERPATH"], sys_, sys_, sys_)
i += 1
f1.write(cmd)
else:
if (i+1)%24 == 0:
cmd = "rm -f %s.xyz_2 %s.out \n%s/optimize %s.xyz -k %s.key 0.0001 > %s.out \n"%(sys_, sys_, os.environ["TINKERPATH"], sys_, sys_, sys_)
i += 1
else:
cmd = "rm -f %s.xyz_2 %s.out \n%s/optimize %s.xyz -k %s.key 0.0001 > %s.out & \n"%(sys_, sys_, os.environ["TINKERPATH"], sys_, sys_, sys_)
i += 1
f2.write(cmd)
f1.write("wait\n")
f2.write("wait\n")
f1.close()
f2.close()
os.system("sh runAna.sh")
os.system("sh runMin.sh")
for sys_ in systems:
while not os.path.isfile(os.path.join(os.getcwd(), sys_ + ".out")):
time.sleep(1.0)
Es = {}
RMSDs = {}
for sys_ in systems:
energ = 0.0
rmsd = 0.0
for line in open("%s.out"%sys_).readlines():
if "Total Potential Energy" in line:
energ = float(line.split()[-2].replace('D','e'))
Es[sys_] = energ
RMSDs[sys_] = 0.0
if "Final Function Value :" in line:
energ = float(line.split()[-1].replace('D','e'))
Es[sys_] = energ
M1 = Molecule("%s.xyz" % sys_, ftype="tinker")
M2 = Molecule("%s.xyz_2" % sys_, ftype="tinker")
M1 += M2
RMSDs[sys_] = M1.ref_rmsd(0)[1]
return Es,RMSDs
def __init__(self,options,tgt_opts,forcefield):
super(BindingEnergy,self).__init__(options,tgt_opts,forcefield)
self.set_option(None, None, 'inter_txt', os.path.join(self.tgtdir,tgt_opts['inter_txt']))
self.global_opts, self.sys_opts, self.inter_opts = parse_interactions(self.inter_txt)
# If the global option doesn't exist in the system / interaction, then it is copied over.
for opt in self.global_opts:
for sys in self.sys_opts:
if opt not in self.sys_opts[sys]:
self.sys_opts[sys][opt] = self.global_opts[opt]
for inter in self.inter_opts:
if opt not in self.inter_opts[inter]:
self.inter_opts[inter][opt] = self.global_opts[opt]
for inter in self.inter_opts:
if 'energy_unit' in self.inter_opts[inter] and self.inter_opts[inter]['energy_unit'].lower() not in ['kilocalorie_per_mole', 'kilocalories_per_mole']:
logger.error('Usage of physical units is has been removed, please provide all binding energies in kcal/mole\n')
raise RuntimeError
self.inter_opts[inter]['reference_physical'] = self.inter_opts[inter]['energy']
if tgt_opts['energy_denom'] == 0.0:
self.set_option(None, None, 'energy_denom', val=np.std(np.array([val['reference_physical'] for val in self.inter_opts.values()])))
else:
self.set_option(None, None, 'energy_denom', val=tgt_opts['energy_denom'])
self.set_option(None, None, 'rmsd_denom', val=tgt_opts['rmsd_denom'])
self.set_option(tgt_opts,'cauchy')
self.set_option(tgt_opts,'attenuate')
logger.info("The energy denominator is: %s\n" % str(self.energy_denom))
logger.info("The RMSD denominator is: %s\n" % str(self.rmsd_denom))
if self.cauchy:
logger.info("Each contribution to the interaction energy objective function will be scaled by 1.0 / ( denom**2 + reference**2 )\n")
if self.attenuate:
logger.error('attenuate and cauchy are mutually exclusive\n')
raise RuntimeError
elif self.attenuate:
logger.info("Repulsive interactions beyond energy_denom will be scaled by 1.0 / ( denom**2 + (reference-denom)**2 )\n")
## Build keyword dictionaries to pass to engine.
engine_args = OrderedDict(self.OptionDict.items() + options.items())
del engine_args['name']
## Create engine objects.
self.engines = OrderedDict()
for sysname,sysopt in self.sys_opts.items():
M = Molecule(os.path.join(self.root, self.tgtdir, sysopt['geometry']))
if 'select' in sysopt:
atomselect = np.array(uncommadash(sysopt['select']))
M = M.atom_select(atomselect)
if self.FF.rigid_water: M.rigid_water()
self.engines[sysname] = self.engine_(target=self, mol=M, name=sysname, tinker_key=os.path.join(sysopt['keyfile']), **engine_args)
def main():
M = Molecule(opts.coords)
if len(M.molecules) != 1:
raise RuntimeError(
'Input coordinates must be a single contiguous molecule')
if opts.phi1 == None:
raise RuntimeError(
'phi1 (the first quartet of atoms) must be provided')
xyzout = []
commout = []
xyzcsh = []
commcsh = []
if opts.phi2 != None: # Two dimensional scan
for inc1 in range(0, 360, opts.scan):
for inc2 in range(0, 360, opts.scan):
xyzrot, clash = get_rotated_xyz(M, [opts.phi1, opts.phi2],
[inc1, inc2])
print(inc1, inc2, "Clash" if clash else "Ok")
comm = "Dihedrals %s, %s set to %i, %i" % (str(
opts.phi1), str(opts.phi2), inc1, inc2)
if clash:
xyzcsh.append(xyzrot.copy())
commcsh.append(comm)
else:
xyzout.append(xyzrot.copy())
commout.append(comm)
else: # One dimensional scan
for inc1 in range(0, 360, opts.scan):
xyzrot, clash = get_rotated_xyz(M, [opts.phi1], [inc1])
print(inc1, "Clash" if clash else "Ok")
comm = "Dihedral %s set to %i" % (str(opts.phi1), inc1)
if clash:
xyzcsh.append(xyzrot.copy())
commcsh.append(comm)
else:
xyzout.append(xyzrot.copy())
commout.append(comm)
if len(xyzout) > 0:
M.xyzs = xyzout
M.comms = commout
M.write(
os.path.splitext(opts.coords)[0] + "_out" +
os.path.splitext(opts.coords)[1])
if len(xyzcsh) > 0:
M.xyzs = xyzcsh
M.comms = commcsh
M.write(
os.path.splitext(opts.coords)[0] + "_clash" +
os.path.splitext(opts.coords)[1])
def calc_new(self, coords, dirname):
if not os.path.exists(dirname): os.makedirs(dirname)
Gro = Molecule("conf.gro")
Gro.xyzs[0] = coords.reshape(-1, 3) * 0.529
cwd = os.getcwd()
shutil.copy2("topol.top", dirname)
shutil.copy2("shot.mdp", dirname)
os.chdir(dirname)
Gro.write("coords.gro")
G = GMX(coords="coords.gro", gmx_top="topol.top", gmx_mdp="shot.mdp")
EF = G.energy_force()
Energy = EF[0, 0] / eqcgmx
Gradient = EF[0, 1:] / fqcgmx
os.chdir(cwd)
return Energy, Gradient
def __init__(self,options,tgt_opts,forcefield):
super(BindingEnergy,self).__init__(options,tgt_opts,forcefield)
self.set_option(None, None, 'inter_txt', os.path.join(self.tgtdir,tgt_opts['inter_txt']))
self.global_opts, self.sys_opts, self.inter_opts = parse_interactions(self.inter_txt)
# If the global option doesn't exist in the system / interaction, then it is copied over.
for opt in self.global_opts:
for sys in self.sys_opts:
if opt not in self.sys_opts[sys]:
self.sys_opts[sys][opt] = self.global_opts[opt]
for inter in self.inter_opts:
if opt not in self.inter_opts[inter]:
self.inter_opts[inter][opt] = self.global_opts[opt]
for inter in self.inter_opts:
if 'energy_unit' in self.inter_opts[inter] and self.inter_opts[inter]['energy_unit'].lower() not in ['kilocalorie_per_mole', 'kilocalories_per_mole']:
logger.error('Usage of physical units is has been removed, please provide all binding energies in kcal/mole\n')
raise RuntimeError
self.inter_opts[inter]['reference_physical'] = self.inter_opts[inter]['energy']
if tgt_opts['energy_denom'] == 0.0:
self.set_option(None, None, 'energy_denom', val=np.std(np.array([val['reference_physical'] for val in self.inter_opts.values()])))
else:
self.set_option(None, None, 'energy_denom', val=tgt_opts['energy_denom'])
self.set_option(None, None, 'rmsd_denom', val=tgt_opts['rmsd_denom'])
self.set_option(tgt_opts,'attenuate')
## LPW 2018-02-11: This is set to True if the target calculates
## a single-point property over several existing snapshots.
self.loop_over_snapshots = False
logger.info("The energy denominator is: %s\n" % str(self.energy_denom))
logger.info("The RMSD denominator is: %s\n" % str(self.rmsd_denom))
if self.attenuate:
denom = self.energy_denom
logger.info("Interaction energies more positive than %.1f will have reduced weight going as: 1.0 / (%.1f^2 + (energy-%.1f)^2)\n" % (denom, denom, denom))
## Build keyword dictionaries to pass to engine.
engine_args = OrderedDict(list(self.OptionDict.items()) + list(options.items()))
engine_args.pop('name', None)
## Create engine objects.
self.engines = OrderedDict()
for sysname,sysopt in self.sys_opts.items():
M = Molecule(os.path.join(self.root, self.tgtdir, sysopt['geometry']))
if 'select' in sysopt:
atomselect = np.array(uncommadash(sysopt['select']))
M = M.atom_select(atomselect)
if self.FF.rigid_water: M.rigid_water()
self.engines[sysname] = self.engine_(target=self, mol=M, name=sysname, tinker_key=os.path.join(sysopt['keyfile']), **engine_args)
def check_connectivity(filename):
""" Check if the connectivity in the molecule file is consistent with geometry
Using force balance Molecule.build_bonds() for this first draft
This can be improved by OpenEye or other methods
"""
fbmol = Molecule(filename)
orig_bonds = set(fbmol.bonds)
# for b1, b2 in fbmol.bonds:
# bond = (b1, b2) if b1 < b2 else (b2, b1)
# orig_bonds.add(bond)
fbmol.build_bonds()
new_bonds = set(fbmol.bonds)
# for b1, b2 in fbmol.bonds:
# bond = (b1, b2) if b1 < b2 else (b2, b1)
# new_bonds.add(bond)
return orig_bonds == new_bonds
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.leapcmd = onefile(kwargs.get('leapcmd'), 'leap', err=True)
self.absleap = os.path.abspath(self.leapcmd)
# Name of the molecule, currently just call it a default name.
self.mname = 'molecule'
if 'mol' in kwargs:
self.mol = kwargs['mol']
elif 'coords' in kwargs:
crdfile = onefile(kwargs.get('coords'), None, err=True)
self.mol = Molecule(crdfile, build_topology=False)
# AMBER has certain PDB requirements, so we will absolutely require one.
needpdb = True
# if hasattr(self, 'mol') and all([i in self.mol.Data.keys() for i in ["chain", "atomname", "resid", "resname", "elem"]]):
# needpdb = False
# Determine the PDB file name.
# If 'pdb' is provided to Engine initialization, it will be used to
# copy over topology information (chain, atomname etc.). If mol/coords
# is not provided, then it will also provide the coordinates.
pdbfnm = onefile(kwargs.get('pdb'), 'pdb' if needpdb else None, err=needpdb)
if pdbfnm != None:
mpdb = Molecule(pdbfnm, build_topology=False)
if hasattr(self, 'mol'):
for i in ["chain", "atomname", "resid", "resname", "elem"]:
self.mol.Data[i] = mpdb.Data[i]
else:
self.mol = copy.deepcopy(mpdb)
self.abspdb = os.path.abspath(pdbfnm)
def _build_internal_coordinates(self):
from geometric.internal import PrimitiveInternalCoordinates
m = Molecule(os.path.join(self.tgtdir, "input.mol2"))
IC = PrimitiveInternalCoordinates(m)
self.IC = IC
def load_psi4_input(self, psi4in):
""" Psi4 input file parser, only support xyz coordinates for now """
coords = []
elems = []
found_molecule, found_geo, found_gradient = False, False, False
psi4_temp = [
] # store a template of the input file for generating new ones
for line in open(psi4in):
if 'molecule' in line:
found_molecule = True
psi4_temp.append(line)
elif found_molecule is True:
ls = line.split()
if len(ls) == 4:
if found_geo == False:
found_geo = True
psi4_temp.append("$!geometry@here")
# parse the xyz format
elems.append(ls[0])
coords.append(ls[1:4])
else:
psi4_temp.append(line)
if '}' in line:
found_molecule = False
else:
psi4_temp.append(line)
if "gradient(" in line:
found_gradient = True
if found_gradient == False:
raise RuntimeError(
"Psi4 inputfile %s should have gradient() command." % psi4in)
self.M = Molecule()
self.M.elem = elems
self.M.xyzs = [np.array(coords, dtype=np.float64)]
self.psi4_temp = psi4_temp
def read_molecules_from_optgeo_target(target_fol):
# read all molecules from an optgeo target folder
res = {}
with open(os.path.join(target_fol, 'notes.txt')) as fnote:
for line in fnote:
ls = line.split()
if len(ls) == 7 and ls[-1] == 'SUCCESS':
assert ls[3] == 'molecule_id'
mol_id = ls[4]
fnm_pre = ls[0]
# read content of mol2 file
mol2_fnm = fnm_pre + '.mol2'
with open(os.path.join(target_fol, mol2_fnm)) as fmol2:
mol2_str = fmol2.read()
# read content of pdb file
pdb_fnm = fnm_pre + '.pdb'
with open(os.path.join(target_fol, pdb_fnm)) as f:
pdb_str = f.read()
# read QM geometry from xyz file
xyz_fnm = fnm_pre + '.xyz'
m = Molecule(os.path.join(target_fol, xyz_fnm))
data = {
'mol2_str': mol2_str,
'pdb_str': pdb_str,
'qm_geo': m.xyzs[0]
}
res[mol_id] = data
return res
def validate_gro_file(self, filename):
""" Validate gro file, this is the first step and we save the molecule object """
os.chdir(self._folder)
self.gro_filename = filename
try:
m = Molecule(self.gro_filename)
pdb_string = '\n'.join(m.write_pdb(range(m.na)))
ret = {
'success': True,
'n_shots': len(m),
'n_atoms': m.na,
'pdbString': pdb_string,
}
except Exception as e:
print(e)
ret = {'success': False, 'error': str(e)}
return ret
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.key = onefile('key', kwargs['tinker_key'] if 'tinker_key' in kwargs else None)
self.prm = onefile('prm', kwargs['tinker_prm'] if 'tinker_prm' in kwargs else None)
if 'mol' in kwargs:
self.mol = kwargs['mol']
elif 'coords' in kwargs:
if kwargs['coords'].endswith('.xyz'):
self.mol = Molecule(kwargs['coords'], ftype="tinker")
else:
self.mol = Molecule(kwargs['coords'])
else:
arcfile = onefile('arc')
if not arcfile: raise RuntimeError('Cannot determine which .arc file to use')
self.mol = Molecule(arcfile)
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.key = onefile("key", kwargs["tinker_key"] if "tinker_key" in kwargs else None)
self.prm = onefile("prm", kwargs["tinker_prm"] if "tinker_prm" in kwargs else None)
if "mol" in kwargs:
self.mol = kwargs["mol"]
elif "coords" in kwargs:
if kwargs["coords"].endswith(".xyz"):
self.mol = Molecule(kwargs["coords"], ftype="tinker")
else:
self.mol = Molecule(kwargs["coords"])
else:
arcfile = onefile("arc")
if not arcfile:
raise RuntimeError("Cannot determine which .arc file to use")
self.mol = Molecule(arcfile)
def gather_generations():
shots = Molecule('shots.gro')
qdata = Molecule('qdata.txt')
A1 = np.array(shots.xyzs)
A2 = np.array(qdata.xyzs)
if A1.shape != A2.shape:
raise Exception('shots.gro and qdata.txt appear to contain different data')
elif np.max(np.abs((A1 - A2).flatten())) > 1e-4:
raise Exception('shots.gro and qdata.txt appear to contain different xyz coordinates')
shots.qm_energies = qdata.qm_energies
shots.qm_forces = qdata.qm_forces
shots.qm_espxyzs = qdata.qm_espxyzs
shots.qm_espvals = qdata.qm_espvals
First = True
if First:
All = shots
else:
All += shots
return All
def validate_pdb_file(self, filename):
os.chdir(self._folder)
self.pdb_filename = filename
try:
m = Molecule(self.pdb_filename)
ret = {'success': True }
except Exception as e:
print(e)
ret = {'success': False, 'error': str(e)}
return ret
def _build_internal_coordinates(self):
"Build internal coordinates system with geometric.internal.PrimitiveInternalCoordinates"
# geometric module is imported to build internal coordinates
# importing here will avoid import error for calculations not using this target
from geometric.internal import PrimitiveInternalCoordinates, Distance, Angle, Dihedral, OutOfPlane
self.internal_coordinates = OrderedDict()
for sysname, sysopt in self.sys_opts.items():
geofile = os.path.join(self.root, self.tgtdir, sysopt['geometry'])
topfile = os.path.join(self.root, self.tgtdir, sysopt['topology'])
# logger.info("Building internal coordinates from file: %s\n" % topfile)
m0 = Molecule(geofile)
m = Molecule(topfile)
p_IC = PrimitiveInternalCoordinates(m)
# here we explicitly pick the bonds, angles and dihedrals to evaluate
ic_bonds, ic_angles, ic_dihedrals, ic_impropers = [], [], [], []
for ic in p_IC.Internals:
if isinstance(ic, Distance):
ic_bonds.append(ic)
elif isinstance(ic, Angle):
ic_angles.append(ic)
elif isinstance(ic, Dihedral):
ic_dihedrals.append(ic)
elif isinstance(ic, OutOfPlane):
ic_impropers.append(ic)
# compute and store reference values
pos_ref = m0.xyzs[0]
vref_bonds = np.array([ic.value(pos_ref) for ic in ic_bonds])
vref_angles = np.array(
[ic.value(pos_ref) * RADIAN_2_DEGREE for ic in ic_angles])
vref_dihedrals = np.array(
[ic.value(pos_ref) * RADIAN_2_DEGREE for ic in ic_dihedrals])
vref_impropers = np.array(
[ic.value(pos_ref) * RADIAN_2_DEGREE for ic in ic_impropers])
self.internal_coordinates[sysname] = {
'ic_bonds': ic_bonds,
'ic_angles': ic_angles,
'ic_dihedrals': ic_dihedrals,
'ic_impropers': ic_impropers,
'vref_bonds': vref_bonds,
'vref_angles': vref_angles,
'vref_dihedrals': vref_dihedrals,
'vref_impropers': vref_impropers,
}
def __init__(self, options, tgt_opts, forcefield):
super(TorsionProfileTarget, self).__init__(options, tgt_opts,
forcefield)
if not os.path.exists(os.path.join(self.tgtdir, 'metadata.json')):
raise RuntimeError(
'TorsionProfileTarget needs torsion drive metadata.json file')
with open(os.path.join(self.tgtdir, 'metadata.json')) as f:
self.metadata = json.load(f)
self.ndim = len(self.metadata['dihedrals'])
self.freeze_atoms = sorted(
set(itertools.chain(*self.metadata['dihedrals'])))
## Read in the coordinate files and get topology information from PDB
if hasattr(self, 'pdb') and self.pdb is not None:
self.mol = Molecule(os.path.join(self.root, self.tgtdir,
self.coords),
top=(os.path.join(self.root, self.tgtdir,
self.pdb)))
else:
self.mol = Molecule(
os.path.join(self.root, self.tgtdir, self.coords))
## Number of snapshots.
self.ns = len(self.mol)
## Option for how much data to write to disk.
self.set_option(tgt_opts, 'writelevel', 'writelevel')
## Harmonic restraint for non-torsion atoms in kcal/mol.
self.set_option(tgt_opts, 'restrain_k', 'restrain_k')
## Attenuate the weights as a function of energy
self.set_option(tgt_opts, 'attenuate', 'attenuate')
## Energy denominator for objective function
self.set_option(tgt_opts, 'energy_denom', 'energy_denom')
## Set upper cutoff energy
self.set_option(tgt_opts, 'energy_upper', 'energy_upper')
## Read in the reference data.
self.read_reference_data()
## Build keyword dictionaries to pass to engine.
engine_args = OrderedDict(
list(self.OptionDict.items()) + list(options.items()))
engine_args.pop('name', None)
## Create engine object.
engine_args['freeze_atoms'] = self.freeze_atoms
self.engine = self.engine_(target=self, mol=self.mol, **engine_args)
def prepare_temp_directory(self, options, tgt_opts):
abstempdir = os.path.join(self.root,self.tempdir)
if self.FF.rigid_water:
self.optprog = "optrigid"
#LinkFile(os.path.join(self.root,self.tgtdir,"rigid.key"),os.path.join(abstempdir,"rigid.key"))
else:
self.optprog = "optimize"
# Link the necessary programs into the temporary directory
LinkFile(os.path.join(options['tinkerpath'],"analyze"),os.path.join(abstempdir,"analyze"))
LinkFile(os.path.join(options['tinkerpath'],self.optprog),os.path.join(abstempdir,self.optprog))
LinkFile(os.path.join(options['tinkerpath'],"superpose"),os.path.join(abstempdir,"superpose"))
# Link the run parameter file
# The master file might be unneeded??
for sysname,sysopt in self.sys_opts.items():
if self.FF.rigid_water:
# Make every water molecule rigid
# WARNING: Hard coded values here!
M = Molecule(os.path.join(self.root, self.tgtdir, sysopt['geometry']),ftype="tinker")
for a in range(0, len(M.xyzs[0]), 3):
flex = M.xyzs[0]
wat = flex[a:a+3]
com = wat.mean(0)
wat -= com
o = wat[0]
h1 = wat[1]
h2 = wat[2]
r1 = h1 - o
r2 = h2 - o
r1 /= Np.linalg.norm(r1)
r2 /= Np.linalg.norm(r2)
# Obtain unit vectors.
ex = r1 + r2
ey = r1 - r2
ex /= Np.linalg.norm(ex)
ey /= Np.linalg.norm(ey)
Bond = 0.9572
Ang = Np.pi * 104.52 / 2 / 180
cosx = Np.cos(Ang)
cosy = Np.sin(Ang)
h1 = o + Bond*ex*cosx + Bond*ey*cosy
h2 = o + Bond*ex*cosx - Bond*ey*cosy
rig = Np.array([o, h1, h2]) + com
M.xyzs[0][a:a+3] = rig
M.write(os.path.join(abstempdir,sysopt['geometry']),ftype="tinker")
else:
M = Molecule(os.path.join(self.root, self.tgtdir, sysopt['geometry']),ftype="tinker")
if 'select' in sysopt:
atomselect = Np.array(uncommadash(sysopt['select']))
#atomselect = eval("Np.arange(M.na)"+sysopt['select'])
M = M.atom_select(atomselect)
M.write(os.path.join(abstempdir,sysname+".xyz"),ftype="tinker")
write_key_with_prm(os.path.join(self.root,self.tgtdir,sysopt['keyfile']),os.path.join(abstempdir,sysname+".key"),ffobj=self.FF)
def get_target_objective_data(self, target_name, opt_iter):
""" Read objective data for a target and an optimization iteration from the tmp folder """
res = {}
target_options = self.input_options['tgt_opts'].get(target_name, None)
if target_options is None:
res['error'] = f"target {target_name} not found"
print(f"get_target_objective_data: {res['error']}")
return res
# check the tmp folder for this target
folder = os.path.join(self.tmp_folder, target_name,
f'iter_{opt_iter:04d}')
if not os.path.isdir(folder):
res['error'] = f"tmp folder {folder} not found"
print(f"get_target_objective_data: {res['error']}")
return res
# get target type specific objective information
target_type = target_options['type']
if target_type.lower().startswith('abinitio'):
# read energy compare data
energy_compare_file = os.path.join(folder, 'EnergyCompare.txt')
if not os.path.isfile(energy_compare_file):
res['error'] = f"file {energy_compare_file} not found"
print(f"get_target_objective_data: {res['error']}")
return res
energy_compare_data = np.loadtxt(energy_compare_file)
res['qm_energies'] = energy_compare_data[:, 0].tolist()
res['mm_energies'] = energy_compare_data[:, 1].tolist()
res['diff'] = energy_compare_data[:, 2].tolist()
res['weights'] = energy_compare_data[:, 3].tolist()
# read molecule geometry
mol_file = os.path.join(folder, 'coords.xyz')
m = Molecule(mol_file)
# generate pdb string
if 'resname' not in m.Data:
m.Data['resname'] = ['MOL'] * m.na
m.Data['resid'] = [1] * m.na
res['pdbString'] = '\n'.join(m.write_pdb(range(m.na)))
else:
res['error'] = f"get objective data for target type {target_type} not implemented"
print(f"get_target_objective_data: {res['error']}")
return res
return res
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.key = onefile(kwargs.get('tinker_key'), 'key')
self.prm = onefile(kwargs.get('tinker_prm'), 'prm')
if 'mol' in kwargs:
self.mol = kwargs['mol']
else:
crdfile = onefile(kwargs.get('coords'), 'arc', err=True)
self.mol = Molecule(crdfile)
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.key = onefile(kwargs.get("tinker_key"), "key")
self.prm = onefile(kwargs.get("tinker_prm"), "prm")
if "mol" in kwargs:
self.mol = kwargs["mol"]
else:
crdfile = onefile(kwargs.get("coords"), "arc", err=True)
self.mol = Molecule(crdfile)
def validate_coords_file(self, filename):
""" Validate coords xyz file, this is the first step and we save the molecule object """
os.chdir(self._folder)
self.coords_filename = filename
try:
m = Molecule(self.coords_filename)
# generate pdb string
if 'resname' not in m.Data:
m.Data['resname'] = ['MOL'] * m.na
m.Data['resid'] = [1] * m.na
pdb_string = '\n'.join(m.write_pdb(range(m.na)))
ret = {
'success': True,
'n_shots': len(m),
'n_atoms': m.na,
'pdbString': pdb_string,
}
except Exception as e:
print(e)
ret = {'success': False, 'error': str(e)}
return ret
def main():
M = Molecule(argv[1])
tempfnm = argv[3] if len(argv) >= 4 else None
if tempfnm != None:
M.add_quantum(tempfnm)
print M.Data.keys()
M.write(argv[2])
def write_torsion_target(procedure, target_name, removing_unreal=False):
"""
Fetch data from a QCArchive procedure and write as a ForceBalance Target folder
Input:
------
procedure: qcfractal.interface.orm.torsiondrive_orm.TorsionDriveORM
An object that represents a computation
target_name: string
Folder name to write the ForceBalance target
removing_unreal: bool, default False
If true, remove the atoms that are not "real"
"""
# check if the target folder name exists
if os.path.exists(target_name):
raise RuntimeError(f"Target folder {target_name} already exists")
# form a Molecule object from the first torsion grid data
grid_molecules = procedure.final_molecules()
grid_energies = procedure.final_energies()
data = next(iter(grid_molecules.values()))
elem = data['symbols']
bonds = [(b[0], b[1]) for b in data['connectivity']]
# remove the "unreal" atoms?
removing_unreal = removing_unreal and (not all(data['real']))
if removing_unreal:
elem = [e for e, f in zip(elem, data['real']) if f is True]
bonds = [(b[0], b[1]) for b in bonds
if data['real'][b[0]] and data['real'][b[1]]]
# form the Molecule object
m = Molecule()
m.Data = {
'elem': elem,
'bonds': bonds,
'name': data['name'],
'xyzs': [],
'qm_energies': [],
'comms': []
}
# load all frames
for grid_id, data in grid_molecules.items():
geo = np.array(data['geometry']).reshape(-1, 3) * bohr2ang
if removing_unreal:
geo = geo[data['real']]
m.Data['xyzs'].append(geo)
energy = grid_energies[grid_id]
m.Data['qm_energies'].append(energy)
m.Data['comms'].append(f'{data["name"]} at torsion grid {grid_id}')
# write the data
os.mkdir(target_name)
os.chdir(target_name)
m.write('qdata.txt')
m.write('geo.xyz')
os.chdir('..')
def write_molecule_files(molecule, name, test_ff=None):
qcjson_mol = molecule.dict(encoding='json')
oemol = cmiles.utils.load_molecule(qcjson_mol)
# write the mol2 file and xyz file
for ext in ['xyz', 'mol2']:
ofs.open(f'{name}.{ext}')
oechem.OEWriteMolecule(ofs, oemol)
ofs.close()
success = True
err_msg = ""
# test if bonds changed
bond_set = {(a, b) for a, b, v in molecule.connectivity}
if not check_connectivity(bond_set, f'{name}.mol2'):
success = False
err_msg = "Bonds changed after rebuild"
if not os.path.exists('../err_bonds_changed'):
os.mkdir('../err_bonds_changed')
shutil.move(f'{name}.mol2', f'../err_bonds_changed/{name}.mol2')
os.remove(f'{name}.xyz')
# test if can be created by the test_ff
if success == True and test_ff != None:
from openforcefield.topology import Molecule as Off_Molecule
from openforcefield.topology import Topology as Off_Topology
try:
off_molecule = Off_Molecule.from_file(f'{name}.mol2')
off_topology = Off_Topology.from_molecules(off_molecule)
test_ff.create_openmm_system(off_topology)
except Exception as e:
success = False
err_msg = str(e)
if not os.path.exists('../error_mol2s'):
os.mkdir('../error_mol2s')
shutil.move(f'{name}.mol2', f'../error_mol2s/{name}.mol2')
os.remove(f'{name}.xyz')
if success == True:
# use ForceBalance Molecule to generate pdb file
# because the oechem.OEWriteMolecule will mess up with atom indices
fbmol = Molecule(f'{name}.mol2')
fbmol.write(f'{name}.pdb')
return success, err_msg
def qc_molecule_to_fb_molecule(self, qc_molecule):
""" Convert an qcportal.Molecule object to a forcebalance.molecule.Molecule object"""
m = Molecule()
m.elem = [Elements[i] for i in qc_molecule.atomic_numbers]
m.xyzs = [qc_molecule.geometry * bohr2ang]
m.molecular_charge = qc_molecule.molecular_charge
m.mult = qc_molecule.molecular_multiplicity
return m
def main():
import argparse
parser = argparse.ArgumentParser()
parser.add_argument("infile", help='Input mol2 file for a single molecule')
parser.add_argument("-o", "--outfile", default='dihedral_list.json', help='Output json file containing definition of dihedrals')
args = parser.parse_args()
molecule = Molecule(args.infile)
selector = DihedralSelector(molecule)
dihedral_list = selector.find_dihedrals()
print(f"Found {len(dihedral_list)} dihedrals")
for d in dihedral_list:
print(d)
selector.write_dihedrals(dihedral_list, args.outfile)
def main():
M = Molecule(opts.coords)
if len(M.molecules) != 1:
raise RuntimeError('Input coordinates must be a single contiguous molecule')
if opts.phi1 == None:
raise RuntimeError('phi1 (the first quartet of atoms) must be provided')
xyzout = []
commout = []
xyzcsh = []
commcsh = []
if opts.phi2 != None: # Two dimensional scan
for inc1 in range(0, 360, opts.scan):
for inc2 in range(0, 360, opts.scan):
xyzrot, clash = get_rotated_xyz(M, [opts.phi1, opts.phi2], [inc1, inc2])
print(inc1, inc2, "Clash" if clash else "Ok")
comm = "Dihedrals %s, %s set to %i, %i" % (str(opts.phi1), str(opts.phi2), inc1, inc2)
if clash:
xyzcsh.append(xyzrot.copy())
commcsh.append(comm)
else:
xyzout.append(xyzrot.copy())
commout.append(comm)
else: # One dimensional scan
for inc1 in range(0, 360, opts.scan):
xyzrot, clash = get_rotated_xyz(M, [opts.phi1], [inc1])
print(inc1, "Clash" if clash else "Ok")
comm = "Dihedral %s set to %i" % (str(opts.phi1), inc1)
if clash:
xyzcsh.append(xyzrot.copy())
commcsh.append(comm)
else:
xyzout.append(xyzrot.copy())
commout.append(comm)
if len(xyzout) > 0:
M.xyzs = xyzout
M.comms = commout
M.write(os.path.splitext(opts.coords)[0]+"_out"+os.path.splitext(opts.coords)[1])
if len(xyzcsh) > 0:
M.xyzs = xyzcsh
M.comms = commcsh
M.write(os.path.splitext(opts.coords)[0]+"_clash"+os.path.splitext(opts.coords)[1])
def main():
M = Molecule(sys.argv[1])
MyG = build_graph(M)
QMat, Suffix = get_equivalent_atoms(MyG)
M2 = Mol2.mol2_set(sys.argv[1]).compounds.items()[0][1]
NewQ = charge_as_array(M2, QMat)
update_mol2(M2, NewQ, Suffix)
if len(sys.argv) >= 3:
with open(sys.argv[2], 'w') as f:
print >> f, M2
print >> f, Ending
else:
print M2
print Ending
def read_sdf_to_fb_mol(filename):
""" read sdf file and return ForceBalance.molecule.Molecule object """
from forcebalance.molecule import Molecule, Elements
import numpy as np
mol_list = read_split_mols(filename)
assert len(mol_list) == 1, 'file contains multiple molecules'
oe_mol = mol_list[0]
# create a new molecule
fb_mol = Molecule()
# load elems
fb_mol.elem = [Elements[a.GetAtomicNum()] for a in oe_mol.GetAtoms()]
noa = len(fb_mol.elem)
# load coordinates
coords_dict = oe_mol.GetCoords()
fb_mol.xyzs = [np.array([coords_dict[i] for i in range(noa)])]
# load bonds
bonds, bond_orders = [], []
for oe_bond in oe_mol.GetBonds():
idx_a = oe_bond.GetBgnIdx()
idx_b = oe_bond.GetEndIdx()
bond = (idx_a, idx_b) if idx_a <= idx_b else (idx_b, idx_a)
bonds.append(bond)
bond_orders.append(oe_bond.GetOrder())
fb_mol.bonds = bonds
fb_mol.bond_orders = bond_orders
# load atomic formal charges
atomic_formal_charges = [a.GetFormalCharge() for a in oe_mol.GetAtoms()]
molecular_charge = sum(atomic_formal_charges)
fb_mol.Data['molecular_charge'] = molecular_charge
fb_mol.Data['atomic_formal_charges'] = atomic_formal_charges
# set the oe_mol as one attribute
fb_mol.oe_mol = oe_mol
# set the cmiles id
mapped_smiles = cmiles.utils.mol_to_smiles(oe_mol)
fb_mol.Data['cmiles_id'] = cmiles.generator.get_molecule_ids(mapped_smiles)
return fb_mol
def main():
# create molecule
m = Molecule(opts.xyz_file)
# write to pdb
m.write(tf)
# read into mdtraj
p = mdtraj.load(tf)
# get list of hydrogens to remove
c_ndx = [i.index for i in p.topology.atoms if i.name in c_strip]
tail_atms = [y for (x, y) in m.Data['bonds'] if x in c_ndx]
tail_h = [i for i in tail_atms if i not in c_ndx]
# throw out some hydrogens
atoms_to_keep = [b.index for b in p.topology.atoms if b.index not in tail_h]
p.restrict_atoms(atoms_to_keep)
p.save(op)
# hella circular
x = Molecule(op)
x.write(opts.out_gro)
import numpy as np
from forcebalance.molecule import Molecule
from forcebalance.readfrq import read_frq_gen
# Frequency output file.
fout = sys.argv[1]
# Mode number, starting from 1.
modenum = int(sys.argv[2])
if modenum == 0:
raise RuntimeError("Start mode number from one, please")
frqs, modes, intens, elem, xyz = read_frq_gen(fout)
M = Molecule()
M.elem = elem[:]
M.xyzs = []
xmode = modes[modenum - 1]
xmode /= (np.linalg.norm(xmode)/np.sqrt(M.na))
xmode *= 0.3 # Reasonable vibrational amplitude
spac = np.linspace(0, 1, 101)
disp = np.concatenate((spac, spac[::-1][1:], -1*spac[1:], -1*spac[::-1][1:-1]))
for i in disp:
M.xyzs.append(xyz+i*xmode.reshape(-1,3))
M.comms = ['Vibrational Mode %i Frequency %.3f Displacement %.3f' % (modenum, frqs[modenum-1], disp[i]*(np.linalg.norm(xmode)/np.sqrt(M.na))) for i in range(len(M))]
class AMBER(Engine):
""" Engine for carrying out general purpose AMBER calculations. """
def __init__(self, name="amber", **kwargs):
## Keyword args that aren't in this list are filtered out.
self.valkwd = ['amberhome', 'pdb', 'mol2', 'frcmod', 'leapcmd']
super(AMBER,self).__init__(name=name, **kwargs)
def setopts(self, **kwargs):
""" Called by __init__ ; Set AMBER-specific options. """
## The directory containing TINKER executables (e.g. dynamic)
if 'amberhome' in kwargs:
self.amberhome = kwargs['amberhome']
if not os.path.exists(os.path.join(self.amberhome,"sander")):
warn_press_key("The 'sander' executable indicated by %s doesn't exist! (Check amberhome)" \
% os.path.join(self.amberhome,"sander"))
else:
warn_once("The 'amberhome' option was not specified; using default.")
if which('sander') == '':
warn_press_key("Please add AMBER executables to the PATH or specify amberhome.")
self.amberhome = os.path.split(which('sander'))[0]
with wopen('.quit.leap') as f:
print >> f, 'quit'
# AMBER search path
self.spath = []
for line in self.callamber('tleap -f .quit.leap'):
if 'Adding' in line and 'to search path' in line:
self.spath.append(line.split('Adding')[1].split()[0])
os.remove('.quit.leap')
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.leapcmd = onefile(kwargs.get('leapcmd'), 'leap', err=True)
self.absleap = os.path.abspath(self.leapcmd)
# Name of the molecule, currently just call it a default name.
self.mname = 'molecule'
if 'mol' in kwargs:
self.mol = kwargs['mol']
elif 'coords' in kwargs:
crdfile = onefile(kwargs.get('coords'), None, err=True)
self.mol = Molecule(crdfile, build_topology=False)
# AMBER has certain PDB requirements, so we will absolutely require one.
needpdb = True
# if hasattr(self, 'mol') and all([i in self.mol.Data.keys() for i in ["chain", "atomname", "resid", "resname", "elem"]]):
# needpdb = False
# Determine the PDB file name.
# If 'pdb' is provided to Engine initialization, it will be used to
# copy over topology information (chain, atomname etc.). If mol/coords
# is not provided, then it will also provide the coordinates.
pdbfnm = onefile(kwargs.get('pdb'), 'pdb' if needpdb else None, err=needpdb)
if pdbfnm != None:
mpdb = Molecule(pdbfnm, build_topology=False)
if hasattr(self, 'mol'):
for i in ["chain", "atomname", "resid", "resname", "elem"]:
self.mol.Data[i] = mpdb.Data[i]
else:
self.mol = copy.deepcopy(mpdb)
self.abspdb = os.path.abspath(pdbfnm)
# Write the PDB that AMBER is going to read in.
# This may or may not be identical to the one used to initialize the engine.
# self.mol.write('%s.pdb' % self.name)
# self.abspdb = os.path.abspath('%s.pdb' % self.name)
def callamber(self, command, stdin=None, print_to_screen=False, print_command=False, **kwargs):
""" Call TINKER; prepend the amberhome to calling the TINKER program. """
csplit = command.split()
# Sometimes the engine changes dirs and the inpcrd/prmtop go missing, so we link it.
# Prepend the AMBER path to the program call.
prog = os.path.join(self.amberhome, "bin", csplit[0])
csplit[0] = prog
# No need to catch exceptions since failed AMBER calculations will return nonzero exit status.
o = _exec(' '.join(csplit), stdin=stdin, print_to_screen=print_to_screen, print_command=print_command, rbytes=1024, **kwargs)
return o
def leap(self, name=None, delcheck=False):
if not os.path.exists(self.leapcmd):
LinkFile(self.absleap, self.leapcmd)
pdb = os.path.basename(self.abspdb)
if not os.path.exists(pdb):
LinkFile(self.abspdb, pdb)
if name == None: name = self.name
write_leap(self.leapcmd, mol2=self.mol2, frcmod=self.frcmod, pdb=pdb, prefix=name, spath=self.spath, delcheck=delcheck)
self.callamber("tleap -f %s_" % self.leapcmd)
def prepare(self, pbc=False, **kwargs):
""" Called by __init__ ; prepare the temp directory and figure out the topology. """
if hasattr(self,'FF'):
if not (os.path.exists(self.FF.amber_frcmod) and os.path.exists(self.FF.amber_mol2)):
# If the parameter files don't already exist, create them for the purpose of
# preparing the engine, but then delete them afterward.
prmtmp = True
self.FF.make(np.zeros(self.FF.np))
# Currently force field object only allows one mol2 and frcmod file although this can be lifted.
self.mol2 = [self.FF.amber_mol2]
self.frcmod = [self.FF.amber_frcmod]
if 'mol2' in kwargs:
logger.error("FF object is provided, which overrides mol2 keyword argument")
raise RuntimeError
if 'frcmod' in kwargs:
logger.error("FF object is provided, which overrides frcmod keyword argument")
raise RuntimeError
else:
prmtmp = False
self.mol2 = listfiles(kwargs.get('mol2'), 'mol2', err=True)
self.frcmod = listfiles(kwargs.get('frcmod'), 'frcmod', err=True)
# Figure out the topology information.
self.leap()
o = self.callamber("rdparm %s.prmtop" % self.name,
stdin="printAtoms\nprintBonds\nexit\n",
persist=True, print_error=False)
# Once we do this, we don't need the prmtop and inpcrd anymore
os.unlink("%s.inpcrd" % self.name)
os.unlink("%s.prmtop" % self.name)
os.unlink("leap.log")
mode = 'None'
self.AtomLists = defaultdict(list)
G = nx.Graph()
for line in o:
s = line.split()
if 'Atom' in line:
mode = 'Atom'
elif 'Bond' in line:
mode = 'Bond'
elif 'RDPARM MENU' in line:
continue
elif 'EXITING' in line:
break
elif len(s) == 0:
continue
elif mode == 'Atom':
# Based on parsing lines like these:
"""
327: HA -0.01462 1.0 ( 23:HIP ) H1 E
328: CB -0.33212 12.0 ( 23:HIP ) CT 3
329: HB2 0.10773 1.0 ( 23:HIP ) HC E
330: HB3 0.10773 1.0 ( 23:HIP ) HC E
331: CG 0.18240 12.0 ( 23:HIP ) CC B
"""
# Based on variable width fields.
atom_number = int(line.split(':')[0])
atom_name = line.split()[1]
atom_charge = float(line.split()[2])
atom_mass = float(line.split()[3])
rnn = line.split('(')[1].split(')')[0].split(':')
residue_number = int(rnn[0])
residue_name = rnn[1]
atom_type = line.split(')')[1].split()[0]
self.AtomLists['Name'].append(atom_name)
self.AtomLists['Charge'].append(atom_charge)
self.AtomLists['Mass'].append(atom_mass)
self.AtomLists['ResidueNumber'].append(residue_number)
self.AtomLists['ResidueName'].append(residue_name)
# Not sure if this works
G.add_node(atom_number)
elif mode == 'Bond':
a, b = (int(i) for i in (line.split('(')[1].split(')')[0].split(',')))
G.add_edge(a, b)
self.AtomMask = [a == 'A' for a in self.AtomLists['ParticleType']]
# Use networkx to figure out a list of molecule numbers.
# gs = nx.connected_component_subgraphs(G)
# tmols = [gs[i] for i in np.argsort(np.array([min(g.nodes()) for g in gs]))]
# mnodes = [m.nodes() for m in tmols]
# self.AtomLists['MoleculeNumber'] = [[i+1 in m for m in mnodes].index(1) for i in range(self.mol.na)]
## Write out the trajectory coordinates to a .mdcrd file.
# I also need to write the trajectory
if 'boxes' in self.mol.Data.keys():
warn_press_key("Writing %s-all.crd file with no periodic box information" % self.name)
del self.mol.Data['boxes']
if hasattr(self, 'target') and hasattr(self.target,'shots'):
self.qmatoms = target.qmatoms
self.mol.write("%s-all.crd" % self.name, select=range(self.target.shots), ftype="mdcrd")
else:
self.qmatoms = self.mol.na
self.mol.write("%s-all.crd" % self.name, ftype="mdcrd")
if prmtmp:
for f in self.FF.fnms:
os.unlink(f)
def evaluate_(self, crdin, force=False):
"""
Utility function for computing energy and forces using AMBER.
Inputs:
crdin: AMBER .mdcrd file name.
force: Switch for parsing the force. (Currently it always calculates the forces.)
Outputs:
Result: Dictionary containing energies (and optionally) forces.
"""
force_mdin="""Loop over conformations and compute energy and force (use ioutfnm=1 for netcdf, ntb=0 for no box)
&cntrl
imin = 5, ntb = 0, cut=9, nstlim = 0, nsnb = 0
/
&debugf
do_debugf = 1, dumpfrc = 1
/
"""
with wopen("%s-force.mdin" % self.name) as f:
print >> f, force_mdin
## This line actually runs AMBER.
self.leap(delcheck=True)
self.callamber("sander -i %s-force.mdin -o %s-force.mdout -p %s.prmtop -c %s.inpcrd -y %s -O" %
(self.name, self.name, self.name, self.name, crdin))
ParseMode = 0
Result = {}
Energies = []
Forces = []
Force = []
for line in open('forcedump.dat'):
line = line.strip()
sline = line.split()
if ParseMode == 1:
if len(sline) == 1 and isfloat(sline[0]):
Energies.append(float(sline[0]) * 4.184)
ParseMode = 0
if ParseMode == 2:
if len(sline) == 3 and all(isfloat(sline[i]) for i in range(3)):
Force += [float(sline[i]) * 4.184 * 10 for i in range(3)]
if len(Force) == 3*self.qmatoms:
Forces.append(np.array(Force))
Force = []
ParseMode = 0
if line == '0 START of Energies':
ParseMode = 1
elif line == '1 Total Force':
ParseMode = 2
Result["Energy"] = np.array(Energies[1:])
Result["Force"] = np.array(Forces[1:])
return Result
def energy_force_one(self, shot):
""" Computes the energy and force using TINKER for one snapshot. """
self.mol[shot].write("%s.xyz" % self.name, ftype="tinker")
Result = self.evaluate_("%s.xyz" % self.name, force=True)
return np.hstack((Result["Energy"].reshape(-1,1), Result["Force"]))
def energy(self):
""" Computes the energy using TINKER over a trajectory. """
if hasattr(self, 'md_trajectory') :
x = self.md_trajectory
else:
x = "%s-all.crd" % self.name
self.mol.write(x, ftype="tinker")
return self.evaluate_(x)["Energy"]
def energy_force(self):
""" Computes the energy and force using AMBER over a trajectory. """
if hasattr(self, 'md_trajectory') :
x = self.md_trajectory
else:
x = "%s-all.crd" % self.name
Result = self.evaluate_(x, force=True)
return np.hstack((Result["Energy"].reshape(-1,1), Result["Force"]))
def energy_dipole(self):
""" Computes the energy and dipole using TINKER over a trajectory. """
logger.error('Dipole moments are not yet implemented in AMBER interface')
raise NotImplementedError
if hasattr(self, 'md_trajectory') :
x = self.md_trajectory
else:
x = "%s.xyz" % self.name
self.mol.write(x, ftype="tinker")
Result = self.evaluate_(x, dipole=True)
return np.hstack((Result["Energy"].reshape(-1,1), Result["Dipole"]))
def optimize(self, shot=0, method="newton", crit=1e-4):
""" Optimize the geometry and align the optimized geometry to the starting geometry. """
logger.error('Geometry optimizations are not yet implemented in AMBER interface')
raise NotImplementedError
# Code from tinkerio.py
if os.path.exists('%s.xyz_2' % self.name):
os.unlink('%s.xyz_2' % self.name)
self.mol[shot].write('%s.xyz' % self.name, ftype="tinker")
if method == "newton":
if self.rigid: optprog = "optrigid"
else: optprog = "optimize"
elif method == "bfgs":
if self.rigid: optprog = "minrigid"
else: optprog = "minimize"
o = self.calltinker("%s %s.xyz %f" % (optprog, self.name, crit))
# Silently align the optimized geometry.
M12 = Molecule("%s.xyz" % self.name, ftype="tinker") + Molecule("%s.xyz_2" % self.name, ftype="tinker")
if not self.pbc:
M12.align(center=False)
M12[1].write("%s.xyz_2" % self.name, ftype="tinker")
rmsd = M12.ref_rmsd(0)[1]
cnvgd = 0
mode = 0
for line in o:
s = line.split()
if len(s) == 0: continue
if "Optimally Conditioned Variable Metric Optimization" in line: mode = 1
if "Limited Memory BFGS Quasi-Newton Optimization" in line: mode = 1
if mode == 1 and isint(s[0]): mode = 2
if mode == 2:
if isint(s[0]): E = float(s[1])
else: mode = 0
if "Normal Termination" in line:
cnvgd = 1
if not cnvgd:
for line in o:
logger.info(str(line) + '\n')
logger.info("The minimization did not converge in the geometry optimization - printout is above.\n")
return E, rmsd
def normal_modes(self, shot=0, optimize=True):
logger.error('Normal modes are not yet implemented in AMBER interface')
raise NotImplementedError
# Copied from tinkerio.py
if optimize:
self.optimize(shot, crit=1e-6)
o = self.calltinker("vibrate %s.xyz_2 a" % (self.name))
else:
warn_once("Asking for normal modes without geometry optimization?")
self.mol[shot].write('%s.xyz' % self.name, ftype="tinker")
o = self.calltinker("vibrate %s.xyz a" % (self.name))
# Read the TINKER output. The vibrational frequencies are ordered.
# The six modes with frequencies closest to zero are ignored
readev = False
calc_eigvals = []
calc_eigvecs = []
for line in o:
s = line.split()
if "Vibrational Normal Mode" in line:
freq = float(s[-2])
readev = False
calc_eigvals.append(freq)
calc_eigvecs.append([])
elif "Atom" in line and "Delta X" in line:
readev = True
elif readev and len(s) == 4 and all([isint(s[0]), isfloat(s[1]), isfloat(s[2]), isfloat(s[3])]):
calc_eigvecs[-1].append([float(i) for i in s[1:]])
calc_eigvals = np.array(calc_eigvals)
calc_eigvecs = np.array(calc_eigvecs)
# Sort by frequency absolute value and discard the six that are closest to zero
calc_eigvecs = calc_eigvecs[np.argsort(np.abs(calc_eigvals))][6:]
calc_eigvals = calc_eigvals[np.argsort(np.abs(calc_eigvals))][6:]
# Sort again by frequency
calc_eigvecs = calc_eigvecs[np.argsort(calc_eigvals)]
calc_eigvals = calc_eigvals[np.argsort(calc_eigvals)]
os.system("rm -rf *.xyz_* *.[0-9][0-9][0-9]")
return calc_eigvals, calc_eigvecs
def multipole_moments(self, shot=0, optimize=True, polarizability=False):
logger.error('Multipole moments are not yet implemented in AMBER interface')
raise NotImplementedError
""" Return the multipole moments of the 1st snapshot in Debye and Buckingham units. """
# This line actually runs TINKER
if optimize:
self.optimize(shot, crit=1e-6)
o = self.calltinker("analyze %s.xyz_2 M" % (self.name))
else:
self.mol[shot].write('%s.xyz' % self.name, ftype="tinker")
o = self.calltinker("analyze %s.xyz M" % (self.name))
# Read the TINKER output.
qn = -1
ln = 0
for line in o:
s = line.split()
if "Dipole X,Y,Z-Components" in line:
dipole_dict = OrderedDict(zip(['x','y','z'], [float(i) for i in s[-3:]]))
elif "Quadrupole Moment Tensor" in line:
qn = ln
quadrupole_dict = OrderedDict([('xx',float(s[-3]))])
elif qn > 0 and ln == qn + 1:
quadrupole_dict['xy'] = float(s[-3])
quadrupole_dict['yy'] = float(s[-2])
elif qn > 0 and ln == qn + 2:
quadrupole_dict['xz'] = float(s[-3])
quadrupole_dict['yz'] = float(s[-2])
quadrupole_dict['zz'] = float(s[-1])
ln += 1
calc_moments = OrderedDict([('dipole', dipole_dict), ('quadrupole', quadrupole_dict)])
if polarizability:
if optimize:
o = self.calltinker("polarize %s.xyz_2" % (self.name))
else:
o = self.calltinker("polarize %s.xyz" % (self.name))
# Read the TINKER output.
pn = -1
ln = 0
polarizability_dict = OrderedDict()
for line in o:
s = line.split()
if "Total Polarizability Tensor" in line:
pn = ln
elif pn > 0 and ln == pn + 2:
polarizability_dict['xx'] = float(s[-3])
polarizability_dict['yx'] = float(s[-2])
polarizability_dict['zx'] = float(s[-1])
elif pn > 0 and ln == pn + 3:
polarizability_dict['xy'] = float(s[-3])
polarizability_dict['yy'] = float(s[-2])
polarizability_dict['zy'] = float(s[-1])
elif pn > 0 and ln == pn + 4:
polarizability_dict['xz'] = float(s[-3])
polarizability_dict['yz'] = float(s[-2])
polarizability_dict['zz'] = float(s[-1])
ln += 1
calc_moments['polarizability'] = polarizability_dict
os.system("rm -rf *.xyz_* *.[0-9][0-9][0-9]")
return calc_moments
def energy_rmsd(self, shot=0, optimize=True):
""" Calculate energy of the selected structure (optionally minimize and return the minimized energy and RMSD). In kcal/mol. """
logger.error('Geometry optimization is not yet implemented in AMBER interface')
raise NotImplementedError
rmsd = 0.0
# This line actually runs TINKER
# xyzfnm = sysname+".xyz"
if optimize:
E_, rmsd = self.optimize(shot)
o = self.calltinker("analyze %s.xyz_2 E" % self.name)
#----
# Two equivalent ways to get the RMSD, here for reference.
#----
# M1 = Molecule("%s.xyz" % self.name, ftype="tinker")
# M2 = Molecule("%s.xyz_2" % self.name, ftype="tinker")
# M1 += M2
# rmsd = M1.ref_rmsd(0)[1]
#----
# oo = self.calltinker("superpose %s.xyz %s.xyz_2 1 y u n 0" % (self.name, self.name))
# for line in oo:
# if "Root Mean Square Distance" in line:
# rmsd = float(line.split()[-1])
#----
os.system("rm %s.xyz_2" % self.name)
else:
o = self.calltinker("analyze %s.xyz E" % self.name)
# Read the TINKER output.
E = None
for line in o:
if "Total Potential Energy" in line:
E = float(line.split()[-2].replace('D','e'))
if E == None:
logger.error("Total potential energy wasn't encountered when calling analyze!\n")
raise RuntimeError
if optimize and abs(E-E_) > 0.1:
warn_press_key("Energy from optimize and analyze aren't the same (%.3f vs. %.3f)" % (E, E_))
return E, rmsd
def interaction_energy(self, fraga, fragb):
""" Calculate the interaction energy for two fragments. """
logger.error('Interaction energy is not yet implemented in AMBER interface')
raise NotImplementedError
self.A = TINKER(name="A", mol=self.mol.atom_select(fraga), tinker_key="%s.key" % self.name, tinkerpath=self.tinkerpath)
self.B = TINKER(name="B", mol=self.mol.atom_select(fragb), tinker_key="%s.key" % self.name, tinkerpath=self.tinkerpath)
# Interaction energy needs to be in kcal/mol.
return (self.energy() - self.A.energy() - self.B.energy()) / 4.184
def molecular_dynamics(self, nsteps, timestep, temperature=None, pressure=None, nequil=0, nsave=1000, minimize=True, anisotropic=False, threads=1, verbose=False, **kwargs):
"""
Method for running a molecular dynamics simulation.
Required arguments:
nsteps = (int) Number of total time steps
timestep = (float) Time step in FEMTOSECONDS
temperature = (float) Temperature control (Kelvin)
pressure = (float) Pressure control (atmospheres)
nequil = (int) Number of additional time steps at the beginning for equilibration
nsave = (int) Step interval for saving and printing data
minimize = (bool) Perform an energy minimization prior to dynamics
threads = (int) Specify how many OpenMP threads to use
Returns simulation data:
Rhos = (array) Density in kilogram m^-3
Potentials = (array) Potential energies
Kinetics = (array) Kinetic energies
Volumes = (array) Box volumes
Dips = (3xN array) Dipole moments
EComps = (dict) Energy components
"""
logger.error('Molecular dynamics not yet implemented in AMBER interface')
raise NotImplementedError
md_defs = OrderedDict()
md_opts = OrderedDict()
# Print out averages only at the end.
md_opts["printout"] = nsave
md_opts["openmp-threads"] = threads
# Langevin dynamics for temperature control.
if temperature != None:
md_defs["integrator"] = "stochastic"
else:
md_defs["integrator"] = "beeman"
md_opts["thermostat"] = None
# Periodic boundary conditions.
if self.pbc:
md_opts["vdw-correction"] = ''
if temperature != None and pressure != None:
md_defs["integrator"] = "beeman"
md_defs["thermostat"] = "bussi"
md_defs["barostat"] = "montecarlo"
if anisotropic:
md_opts["aniso-pressure"] = ''
elif pressure != None:
warn_once("Pressure is ignored because temperature is turned off.")
else:
if pressure != None:
warn_once("Pressure is ignored because pbc is set to False.")
# Use stochastic dynamics for the gas phase molecule.
# If we use the regular integrators it may miss
# six degrees of freedom in calculating the kinetic energy.
md_opts["barostat"] = None
eq_opts = deepcopy(md_opts)
if self.pbc and temperature != None and pressure != None:
eq_opts["integrator"] = "beeman"
eq_opts["thermostat"] = "bussi"
eq_opts["barostat"] = "berendsen"
if minimize:
if verbose: logger.info("Minimizing the energy...")
self.optimize(method="bfgs", crit=1)
os.system("mv %s.xyz_2 %s.xyz" % (self.name, self.name))
if verbose: logger.info("Done\n")
# Run equilibration.
if nequil > 0:
write_key("%s-eq.key" % self.name, eq_opts, "%s.key" % self.name, md_defs)
if verbose: printcool("Running equilibration dynamics", color=0)
if self.pbc and pressure != None:
self.calltinker("dynamic %s -k %s-eq %i %f %f 4 %f %f" % (self.name, self.name, nequil, timestep, float(nsave*timestep)/1000,
temperature, pressure), print_to_screen=verbose)
else:
self.calltinker("dynamic %s -k %s-eq %i %f %f 2 %f" % (self.name, self.name, nequil, timestep, float(nsave*timestep)/1000,
temperature), print_to_screen=verbose)
os.system("rm -f %s.arc" % (self.name))
# Run production.
if verbose: printcool("Running production dynamics", color=0)
write_key("%s-md.key" % self.name, md_opts, "%s.key" % self.name, md_defs)
if self.pbc and pressure != None:
odyn = self.calltinker("dynamic %s -k %s-md %i %f %f 4 %f %f" % (self.name, self.name, nsteps, timestep, float(nsave*timestep/1000),
temperature, pressure), print_to_screen=verbose)
else:
odyn = self.calltinker("dynamic %s -k %s-md %i %f %f 2 %f" % (self.name, self.name, nsteps, timestep, float(nsave*timestep/1000),
temperature), print_to_screen=verbose)
# Gather information.
os.system("mv %s.arc %s-md.arc" % (self.name, self.name))
self.md_trajectory = "%s-md.arc" % self.name
edyn = []
kdyn = []
temps = []
for line in odyn:
s = line.split()
if 'Current Potential' in line:
edyn.append(float(s[2]))
if 'Current Kinetic' in line:
kdyn.append(float(s[2]))
if len(s) > 0 and s[0] == 'Temperature' and s[2] == 'Kelvin':
temps.append(float(s[1]))
# Potential and kinetic energies converted to kJ/mol.
edyn = np.array(edyn) * 4.184
kdyn = np.array(kdyn) * 4.184
temps = np.array(temps)
if verbose: logger.info("Post-processing to get the dipole moments\n")
oanl = self.calltinker("analyze %s-md.arc" % self.name, stdin="G,E,M", print_to_screen=False)
# Read potential energy and dipole from file.
eanl = []
dip = []
mass = 0.0
ecomp = OrderedDict()
havekeys = set()
first_shot = True
for ln, line in enumerate(oanl):
strip = line.strip()
s = line.split()
if 'Total System Mass' in line:
mass = float(s[-1])
if 'Total Potential Energy : ' in line:
eanl.append(float(s[4]))
if 'Dipole X,Y,Z-Components :' in line:
dip.append([float(s[i]) for i in range(-3,0)])
if first_shot:
for key in eckeys:
if strip.startswith(key):
if key in ecomp:
ecomp[key].append(float(s[-2])*4.184)
else:
ecomp[key] = [float(s[-2])*4.184]
if key in havekeys:
first_shot = False
havekeys.add(key)
else:
for key in havekeys:
if strip.startswith(key):
if key in ecomp:
ecomp[key].append(float(s[-2])*4.184)
else:
ecomp[key] = [float(s[-2])*4.184]
for key in ecomp:
ecomp[key] = np.array(ecomp[key])
ecomp["Potential Energy"] = edyn
ecomp["Kinetic Energy"] = kdyn
ecomp["Temperature"] = temps
ecomp["Total Energy"] = edyn+kdyn
# Energies in kilojoules per mole
eanl = np.array(eanl) * 4.184
# Dipole moments in debye
dip = np.array(dip)
# Volume of simulation boxes in cubic nanometers
# Conversion factor derived from the following:
# In [22]: 1.0 * gram / mole / (1.0 * nanometer)**3 / AVOGADRO_CONSTANT_NA / (kilogram/meter**3)
# Out[22]: 1.6605387831627252
conv = 1.6605387831627252
if self.pbc:
vol = np.array([BuildLatticeFromLengthsAngles(*[float(j) for j in line.split()]).V \
for line in open("%s-md.arc" % self.name).readlines() \
if (len(line.split()) == 6 and isfloat(line.split()[1]) \
and all([isfloat(i) for i in line.split()[:6]]))]) / 1000
rho = conv * mass / vol
else:
vol = None
rho = None
prop_return = OrderedDict()
prop_return.update({'Rhos': rho, 'Potentials': edyn, 'Kinetics': kdyn, 'Volumes': vol, 'Dips': dip, 'Ecomps': ecomp})
return prop_return
class Lipid(Target):
""" Subclass of Target for lipid property matching."""
def __init__(self,options,tgt_opts,forcefield):
# Initialize base class
super(Lipid,self).__init__(options,tgt_opts,forcefield)
# Weight of the density
self.set_option(tgt_opts,'w_rho',forceprint=True)
# Weight of the thermal expansion coefficient
self.set_option(tgt_opts,'w_alpha',forceprint=True)
# Weight of the isothermal compressibility
self.set_option(tgt_opts,'w_kappa',forceprint=True)
# Weight of the isobaric heat capacity
self.set_option(tgt_opts,'w_cp',forceprint=True)
# Weight of the dielectric constant
self.set_option(tgt_opts,'w_eps0',forceprint=True)
# Weight of the area per lipid
self.set_option(tgt_opts,'w_al',forceprint=True)
# Weight of the bilayer isothermal compressibility
self.set_option(tgt_opts,'w_lkappa',forceprint=True)
# Weight of the deuterium order parameter
self.set_option(tgt_opts,'w_scd',forceprint=True)
# Normalize the property contributions to the objective function
self.set_option(tgt_opts,'w_normalize',forceprint=True)
# Optionally pause on the zeroth step
self.set_option(tgt_opts,'manual')
# Number of time steps in the lipid "equilibration" run
self.set_option(tgt_opts,'lipid_eq_steps',forceprint=True)
# Number of time steps in the lipid "production" run
self.set_option(tgt_opts,'lipid_md_steps',forceprint=True)
# Number of time steps in the gas "equilibration" run
self.set_option(tgt_opts,'gas_eq_steps',forceprint=False)
# Number of time steps in the gas "production" run
self.set_option(tgt_opts,'gas_md_steps',forceprint=False)
# Cutoff for nonbonded interactions in the liquid
if tgt_opts['nonbonded_cutoff'] is not None:
self.set_option(tgt_opts,'nonbonded_cutoff')
# Cutoff for vdW interactions if different from other nonbonded interactions
if tgt_opts['vdw_cutoff'] is not None:
self.set_option(tgt_opts,'vdw_cutoff')
# Time step length (in fs) for the lipid production run
self.set_option(tgt_opts,'lipid_timestep',forceprint=True)
# Time interval (in ps) for writing coordinates
self.set_option(tgt_opts,'lipid_interval',forceprint=True)
# Time step length (in fs) for the gas production run
self.set_option(tgt_opts,'gas_timestep',forceprint=True)
# Time interval (in ps) for writing coordinates
self.set_option(tgt_opts,'gas_interval',forceprint=True)
# Minimize the energy prior to running any dynamics
self.set_option(tgt_opts,'minimize_energy',forceprint=True)
# Isolated dipole (debye) for analytic self-polarization correction.
self.set_option(tgt_opts,'self_pol_mu0',forceprint=True)
# Molecular polarizability (ang**3) for analytic self-polarization correction.
self.set_option(tgt_opts,'self_pol_alpha',forceprint=True)
# Set up the simulation object for self-polarization correction.
self.do_self_pol = (self.self_pol_mu0 > 0.0 and self.self_pol_alpha > 0.0)
# Enable anisotropic periodic box
self.set_option(tgt_opts,'anisotropic_box',forceprint=True)
# Whether to save trajectories (0 = never, 1 = delete after good step, 2 = keep all)
self.set_option(tgt_opts,'save_traj')
#======================================#
# Variables which are set here #
#======================================#
## LPW 2018-02-11: This is set to True if the target calculates
## a single-point property over several existing snapshots.
self.loop_over_snapshots = False
# List of trajectory files that may be deleted if self.save_traj == 1.
self.last_traj = []
# Extra files to be copied back at the end of a run.
self.extra_output = []
# Read the reference data
self.read_data()
# Read in lipid starting coordinates.
if 'n_ic' in self.RefData:
# Linked IC folder into the temp-directory.
self.nptfiles += ["IC"]
# Store IC frames in a dictionary.
self.lipid_mols = OrderedDict()
self.lipid_mols_new = OrderedDict()
for pt in self.PhasePoints:
pt_label = "IC/%sK-%s%s" % (pt[0], pt[1], pt[2])
if not os.path.exists(os.path.join(self.root, self.tgtdir, pt_label, self.lipid_coords)):
raise RuntimeError("Initial condition files don't exist; please provide IC directory")
# Create molecule object for each IC.
all_ic = Molecule(os.path.join(self.root, self.tgtdir, pt_label, self.lipid_coords))
self.lipid_mols[pt] = []
n_uniq_ic = int(self.RefData['n_ic'][pt])
if n_uniq_ic > len(all_ic):
raise RuntimeError("Number of frames in initial conditions .gro file is less than the number of parallel simulations requested in data.csv")
# Index ICs by pressure and temperature in a dictionary.
for ic in range(n_uniq_ic):
self.lipid_mols[pt].append(all_ic[ic])
else:
# Read in lipid starting coordinates.
if not os.path.exists(os.path.join(self.root, self.tgtdir, self.lipid_coords)):
logger.error("%s doesn't exist; please provide lipid_coords option\n" % self.lipid_coords)
raise RuntimeError
self.lipid_mol = Molecule(os.path.join(self.root, self.tgtdir, self.lipid_coords), toppbc=True)
# Extra files to be linked into the temp-directory.
self.nptfiles += [self.lipid_coords]
# Scripts to be copied from the ForceBalance installation directory.
self.scripts += ['npt_lipid.py']
# Prepare the temporary directory.
self.prepare_temp_directory()
# Build keyword dictionary to pass to engine.
if self.do_self_pol:
self.gas_engine_args.update(self.OptionDict)
self.gas_engine_args.update(options)
del self.gas_engine_args['name']
# Create engine object for gas molecule to do the polarization correction.
self.gas_engine = self.engine_(target=self, mol=self.gas_mol, name="selfpol", **self.gas_engine_args)
# Don't read indicate.log when calling meta_indicate()
self.read_indicate = False
self.write_indicate = False
# Don't read objective.p when calling meta_get()
self.read_objective = False
#======================================#
# UNDER DEVELOPMENT #
#======================================#
# Put stuff here that I'm not sure about. :)
np.set_printoptions(precision=4, linewidth=100)
np.seterr(under='ignore')
## Saved force field mvals for all iterations
self.SavedMVal = {}
## Saved trajectories for all iterations and all temperatures
self.SavedTraj = defaultdict(dict)
## Evaluated energies for all trajectories (i.e. all iterations and all temperatures), using all mvals
self.MBarEnergy = defaultdict(lambda:defaultdict(dict))
def prepare_temp_directory(self):
""" Prepare the temporary directory by copying in important files. """
abstempdir = os.path.join(self.root,self.tempdir)
for f in self.nptfiles:
LinkFile(os.path.join(self.root, self.tgtdir, f), os.path.join(abstempdir, f))
for f in self.scripts:
LinkFile(os.path.join(os.path.split(__file__)[0],"data",f),os.path.join(abstempdir,f))
def read_data(self):
# Read the 'data.csv' file. The file should contain guidelines.
with open(os.path.join(self.tgtdir,'data.csv'),'rU') as f: R0 = list(csv.reader(f))
# All comments are erased.
R1 = [[sub('#.*$','',word) for word in line] for line in R0 if len(line[0]) > 0 and line[0][0] != "#"]
# All empty lines are deleted and words are converted to lowercase.
R = [[wrd.lower() for wrd in line] for line in R1 if any([len(wrd) for wrd in line]) > 0]
global_opts = OrderedDict()
found_headings = False
known_vars = ['mbar','rho','hvap','alpha','kappa','cp','eps0','cvib_intra',
'cvib_inter','cni','devib_intra','devib_inter', 'al', 'scd', 'n_ic', 'lkappa']
self.RefData = OrderedDict()
for line in R:
if line[0] == "global":
# Global options are mainly denominators for the different observables.
if isfloat(line[2]):
global_opts[line[1]] = float(line[2])
elif line[2].lower() == 'false':
global_opts[line[1]] = False
elif line[2].lower() == 'true':
global_opts[line[1]] = True
elif not found_headings:
found_headings = True
headings = line
if len(set(headings)) != len(headings):
logger.error('Column headings in data.csv must be unique\n')
raise RuntimeError
if 'p' not in headings:
logger.error('There must be a pressure column heading labeled by "p" in data.csv\n')
raise RuntimeError
if 't' not in headings:
logger.error('There must be a temperature column heading labeled by "t" in data.csv\n')
raise RuntimeError
elif found_headings:
try:
# Temperatures are in kelvin.
t = [float(val) for head, val in zip(headings,line) if head == 't'][0]
# For convenience, users may input the pressure in atmosphere or bar.
pval = [float(val.split()[0]) for head, val in zip(headings,line) if head == 'p'][0]
punit = [val.split()[1] if len(val.split()) >= 1 else "atm" for head, val in zip(headings,line) if head == 'p'][0]
unrec = set([punit]).difference(['atm','bar'])
if len(unrec) > 0:
logger.error('The pressure unit %s is not recognized, please use bar or atm\n' % unrec[0])
raise RuntimeError
# This line actually reads the reference data and inserts it into the RefData dictionary of dictionaries.
for head, val in zip(headings,line):
if head == 't' or head == 'p' : continue
if isfloat(val):
self.RefData.setdefault(head,OrderedDict([]))[(t,pval,punit)] = float(val.strip())
elif val.lower() == 'true':
self.RefData.setdefault(head,OrderedDict([]))[(t,pval,punit)] = True
elif val.lower() == 'false':
self.RefData.setdefault(head,OrderedDict([]))[(t,pval,punit)] = False
elif head == 'scd':
self.RefData.setdefault(head,OrderedDict([]))[(t,pval,punit)] = np.array(list(map(float, val.split())))
except:
logger.error(line + '\n')
logger.error('Encountered an error reading this line!\n')
raise RuntimeError
else:
logger.error(line + '\n')
logger.error('I did not recognize this line!\n')
raise RuntimeError
# Check the reference data table for validity.
default_denoms = defaultdict(int)
PhasePoints = None
RefData_copy = copy.deepcopy(self.RefData)
for head in self.RefData:
if head == 'n_ic':
continue
if head not in known_vars+[i+"_wt" for i in known_vars]:
# Only hard-coded properties may be recognized.
logger.error("The column heading %s is not recognized in data.csv\n" % head)
raise RuntimeError
if head in known_vars:
if head+"_wt" not in self.RefData:
# If the phase-point weights are not specified in the reference data file, initialize them all to one.
RefData_copy[head+"_wt"] = OrderedDict([(key, 1.0) for key in self.RefData[head]])
wts = np.array(list(RefData_copy[head+"_wt"].values()))
dat = np.array(list(self.RefData[head].values()))
# S_cd specifies an array of averages (one for each tail node). Find avg over axis 0.
avg = np.average(dat, weights=wts, axis=0)
if len(wts) > 1:
# If there is more than one data point, then the default denominator is the
# standard deviation of the experimental values.
if head == 'scd':
default_denoms[head+"_denom"] = np.average(np.sqrt(np.dot(wts, (dat-avg)**2)/wts.sum()))
else:
default_denoms[head+"_denom"] = np.sqrt(np.dot(wts, (dat-avg)**2)/wts.sum())
else:
# If there is only one data point, then the denominator is just the single
# data point itself.
if head == 'scd':
default_denoms[head+"_denom"] = np.average(np.sqrt(np.abs(dat[0])))
else:
default_denoms[head+"_denom"] = np.sqrt(np.abs(dat[0]))
self.PhasePoints = list(self.RefData[head].keys())
# This prints out all of the reference data.
# printcool_dictionary(self.RefData[head],head)
self.RefData = RefData_copy
# Create labels for the directories.
self.Labels = ["%.2fK-%.1f%s" % i for i in self.PhasePoints]
logger.debug("global_opts:\n%s\n" % str(global_opts))
logger.debug("default_denoms:\n%s\n" % str(default_denoms))
for opt in global_opts:
if "_denom" in opt:
# Record entries from the global_opts dictionary so they can be retrieved from other methods.
self.set_option(global_opts,opt,default=default_denoms[opt])
else:
self.set_option(global_opts,opt)
def check_files(self, there):
there = os.path.abspath(there)
havepts = 0
if all([i in os.listdir(there) for i in self.Labels]):
for d in os.listdir(there):
if d in self.Labels:
if os.path.exists(os.path.join(there, d, 'npt_result.p')):
havepts += 1
if (float(havepts)/len(self.Labels)) > 0.75:
return 1
else:
return 0
def npt_simulation(self, temperature, pressure, simnum):
""" Submit a NPT simulation to the Work Queue. """
wq = getWorkQueue()
if not os.path.exists('npt_result.p'):
link_dir_contents(os.path.join(self.root,self.rundir),os.getcwd())
self.last_traj += [os.path.join(os.getcwd(), i) for i in self.extra_output]
self.lipid_mol[simnum%len(self.lipid_mol)].write(self.lipid_coords, ftype='tinker' if self.engname == 'tinker' else None)
cmdstr = '%s python npt_lipid.py %s %.3f %.3f' % (self.nptpfx, self.engname, temperature, pressure)
if wq is None:
logger.info("Running condensed phase simulation locally.\n")
logger.info("You may tail -f %s/npt.out in another terminal window\n" % os.getcwd())
_exec(cmdstr, copy_stderr=True, outfnm='npt.out')
else:
queue_up(wq, command = cmdstr+' &> npt.out',
input_files = self.nptfiles + self.scripts + ['forcebalance.p'],
output_files = ['npt_result.p', 'npt.out'] + self.extra_output, tgt=self)
def polarization_correction(self,mvals):
d = self.gas_engine.get_multipole_moments(optimize=True)['dipole']
if not in_fd():
logger.info("The molecular dipole moment is % .3f debye\n" % np.linalg.norm(d))
# Taken from the original OpenMM interface code, this is how we calculate the conversion factor.
# dd2 = ((np.linalg.norm(d)-self.self_pol_mu0)*debye)**2
# eps0 = 8.854187817620e-12 * coulomb**2 / newton / meter**2
# epol = 0.5*dd2/(self.self_pol_alpha*angstrom**3*4*np.pi*eps0)/(kilojoule_per_mole/AVOGADRO_CONSTANT_NA)
# In [2]: eps0 = 8.854187817620e-12 * coulomb**2 / newton / meter**2
# In [7]: 1.0 * debye ** 2 / (1.0 * angstrom**3*4*np.pi*eps0) / (kilojoule_per_mole/AVOGADRO_CONSTANT_NA)
# Out[7]: 60.240179789402056
convert = 60.240179789402056
dd2 = (np.linalg.norm(d)-self.self_pol_mu0)**2
epol = 0.5*convert*dd2/self.self_pol_alpha
return epol
def indicate(self):
AGrad = hasattr(self, 'Gp')
PrintDict = OrderedDict()
def print_item(key, heading, physunit):
if self.Xp[key] > 0:
printcool_dictionary(self.Pp[key], title='%s %s%s\nTemperature Pressure Reference Calculated +- Stdev Delta Weight Term ' %
(self.name, heading, " (%s) " % physunit if physunit else ""), bold=True, color=4, keywidth=15)
bar = printcool("%s objective function: % .3f%s" % (heading, self.Xp[key], ", Derivative:" if AGrad else ""))
if AGrad:
self.FF.print_map(vals=self.Gp[key])
logger.info(bar)
PrintDict[heading] = "% 10.5f % 8.3f % 14.5e" % (self.Xp[key], self.Wp[key], self.Xp[key]*self.Wp[key])
print_item("Rho", "Density", "kg m^-3")
print_item("Alpha", "Thermal Expansion Coefficient", "10^-4 K^-1")
print_item("Kappa", "Isothermal Compressibility", "10^-6 bar^-1")
print_item("Cp", "Isobaric Heat Capacity", "cal mol^-1 K^-1")
print_item("Eps0", "Dielectric Constant", None)
print_item("Al", "Average Area per Lipid", "nm^2")
print_item("Scd", "Deuterium Order Parameter", None)
print_item("LKappa", "Bilayer Isothermal Compressibility", "mN/m")
PrintDict['Total'] = "% 10s % 8s % 14.5e" % ("","",self.Objective)
Title = "%s Condensed Phase Properties:\n %-20s %40s" % (self.name, "Property Name", "Residual x Weight = Contribution")
printcool_dictionary(PrintDict,color=4,title=Title,keywidth=31)
return
def objective_term(self, points, expname, calc, err, grad, name="Quantity", SubAverage=False):
if expname in self.RefData:
exp = self.RefData[expname]
Weights = self.RefData[expname+"_wt"]
Denom = getattr(self,expname+"_denom")
else:
# If the reference data doesn't exist then return nothing.
return 0.0, np.zeros(self.FF.np), np.zeros((self.FF.np,self.FF.np)), None
Sum = sum(Weights.values())
for i in Weights:
Weights[i] /= Sum
logger.info("Weights have been renormalized to " + str(sum(Weights.values())) + "\n")
# Use least-squares or hyperbolic (experimental) objective.
LeastSquares = True
logger.info("Physical quantity %s uses denominator = % .4f\n" % (name, Denom))
if not LeastSquares:
# If using a hyperbolic functional form
# we still want the contribution to the
# objective function to be the same when
# Delta = Denom.
Denom /= 3 ** 0.5
Objective = 0.0
Gradient = np.zeros(self.FF.np)
Hessian = np.zeros((self.FF.np,self.FF.np))
Objs = {}
GradMap = []
avgCalc = 0.0
avgExp = 0.0
avgGrad = np.zeros(self.FF.np)
for i, PT in enumerate(points):
avgCalc += Weights[PT]*calc[PT]
avgExp += Weights[PT]*exp[PT]
avgGrad += Weights[PT]*grad[PT]
for i, PT in enumerate(points):
if SubAverage:
G = grad[PT]-avgGrad
Delta = calc[PT] - exp[PT] - avgCalc + avgExp
else:
G = grad[PT]
Delta = calc[PT] - exp[PT]
if hasattr(Delta, "__len__"):
Delta = np.average(Delta)
if LeastSquares:
# Least-squares objective function.
ThisObj = Weights[PT] * Delta ** 2 / Denom**2
Objs[PT] = ThisObj
ThisGrad = 2.0 * Weights[PT] * Delta * G / Denom**2
GradMap.append(G)
Objective += ThisObj
Gradient += ThisGrad
# Gauss-Newton approximation to the Hessian.
Hessian += 2.0 * Weights[PT] * (np.outer(G, G)) / Denom**2
else:
# L1-like objective function.
D = Denom
S = Delta**2 + D**2
ThisObj = Weights[PT] * (S**0.5-D) / Denom
ThisGrad = Weights[PT] * (Delta/S**0.5) * G / Denom
ThisHess = Weights[PT] * (1/S**0.5-Delta**2/S**1.5) * np.outer(G,G) / Denom
Objs[PT] = ThisObj
GradMap.append(G)
Objective += ThisObj
Gradient += ThisGrad
Hessian += ThisHess
GradMapPrint = [["#PhasePoint"] + self.FF.plist]
for PT, g in zip(points,GradMap):
GradMapPrint.append([' %8.2f %8.1f %3s' % PT] + ["% 9.3e" % i for i in g])
o = wopen('gradient_%s.dat' % name)
for line in GradMapPrint:
print(' '.join(line), file=o)
o.close()
Delta = np.array([calc[PT] - exp[PT] for PT in points])
delt = {PT : r for PT, r in zip(points,Delta)}
if expname == 'scd':
print_out = OrderedDict([(' %8.2f %8.1f %3s' % PT, '\n %s' % (' '.join('\t \t \t %9.6f %9.6f +- %-7.6f % 7.6f \n' % F for F in zip(exp[PT], calc[PT], flat(err[PT]), delt[PT])))) for PT in calc])
else:
print_out = OrderedDict([(' %8.2f %8.1f %3s' % PT, "%9.3f %9.3f +- %-7.3f % 7.3f % 9.5f % 9.5f" % (exp[PT],calc[PT],err[PT],delt[PT],Weights[PT],Objs[PT])) for PT in calc])
return Objective, Gradient, Hessian, print_out
def submit_jobs(self, mvals, AGrad=True, AHess=True):
# This routine is called by Objective.stage() will run before "get".
# It submits the jobs to the Work Queue and the stage() function will wait for jobs to complete.
#
# First dump the force field to a pickle file
lp_dump((self.FF,mvals,self.OptionDict,AGrad),'forcebalance.p')
# Give the user an opportunity to copy over data from a previous (perhaps failed) run.
if (not self.evaluated) and self.manual:
warn_press_key("Now's our chance to fill the temp directory up with data!\n(Considering using 'read' or 'continue' for better checkpointing)", timeout=7200)
# If self.save_traj == 1, delete the trajectory files from a previous good optimization step.
if self.evaluated and self.goodstep and self.save_traj < 2:
for fn in self.last_traj:
if os.path.exists(fn):
os.remove(fn)
self.last_traj = []
# Set up and run the NPT simulations.
snum = 0
for label, pt in zip(self.Labels, self.PhasePoints):
T = pt[0]
P = pt[1]
Punit = pt[2]
if Punit == 'bar':
P *= 1.0 / 1.01325
if not os.path.exists(label):
os.makedirs(label)
os.chdir(label)
if 'n_ic' in self.RefData:
n_uniq_ic = int(self.RefData['n_ic'][pt])
# Loop over parallel trajectories.
for trj in range(n_uniq_ic):
rel_trj = "trj_%i" % trj
# Create directories for each parallel simulation.
if not os.path.exists(rel_trj):
os.makedirs(rel_trj)
os.chdir(rel_trj)
# Pull each simulation molecule from the lipid_mols dictionary.
# lipid_mols is a dictionary of paths to either the initial
# geometry files, or the geometries from the final frame of the
# previous iteration.
self.lipid_mol = self.lipid_mols[pt][trj]
self.lipid_mol.write(self.lipid_coords)
if not self.lipid_coords in self.nptfiles:
self.nptfiles += [self.lipid_coords]
self.npt_simulation(T,P,snum)
os.chdir('..')
else:
self.npt_simulation(T,P,snum)
os.chdir('..')
snum += 1
def get(self, mvals, AGrad=True, AHess=True):
"""
Fitting of lipid bulk properties. This is the current major
direction of development for ForceBalance. Basically, fitting
the QM energies / forces alone does not always give us the
best simulation behavior. In many cases it makes more sense
to try and reproduce some experimentally known data as well.
In order to reproduce experimentally known data, we need to
run a simulation and compare the simulation result to
experiment. The main challenge here is that the simulations
are computationally intensive (i.e. they require energy and
force evaluations), and furthermore the results are noisy. We
need to run the simulations automatically and remotely
(i.e. on clusters) and a good way to calculate the derivatives
of the simulation results with respect to the parameter values.
This function contains some experimentally known values of the
density and enthalpy of vaporization (Hvap) of lipid water.
It launches the density and Hvap calculations on the cluster,
and gathers the results / derivatives. The actual calculation
of results / derivatives is done in a separate file.
After the results come back, they are gathered together to form
an objective function.
@param[in] mvals Mathematical parameter values
@param[in] AGrad Switch to turn on analytic gradient
@param[in] AHess Switch to turn on analytic Hessian
@return Answer Contribution to the objective function
"""
mbar_verbose = False
Answer = {}
Results = {}
Points = [] # These are the phase points for which data exists.
BPoints = [] # These are the phase points for which we are doing MBAR for the condensed phase.
tt = 0
for label, PT in zip(self.Labels, self.PhasePoints):
if 'n_ic' in self.RefData:
self.lipid_mols[PT] = [Molecule(last_frame) for last_frame in self.lipid_mols[PT]]
n_uniq_ic = int(self.RefData['n_ic'][PT])
for ic in range(n_uniq_ic):
if os.path.exists('./%s/trj_%s/npt_result.p' % (label, ic)):
# Read in each each parallel simulation's data, and concatenate each property time series.
ts = lp_load('./%s/trj_%s/npt_result.p' % (label, ic))
if ic == 0:
ts_concat = list(ts)
else:
for d_arr in range(len(ts)):
if isinstance(ts[d_arr], np.ndarray):
# Gradients need a unique append format.
if d_arr == 5:
ts_concat[d_arr] = np.append(ts_concat[d_arr], ts[d_arr], axis = 1)
else:
ts_concat[d_arr] = np.append(ts_concat[d_arr], ts[d_arr], axis = 0)
if isinstance(ts_concat[d_arr], list):
ts_concat[d_arr] = [np.append(ts_concat[d_arr][i], ts[d_arr][i], axis = 1) for i in range(len(ts_concat[d_arr]))]
# Write concatenated time series to a pickle file.
if ic == (int(n_uniq_ic) - 1):
lp_dump((ts_concat), './%s/npt_result.p' % label)
if os.path.exists('./%s/npt_result.p' % label):
logger.info('Reading information from ./%s/npt_result.p\n' % label)
Points.append(PT)
Results[tt] = lp_load('./%s/npt_result.p' % label)
tt += 1
else:
logger.warning('The file ./%s/npt_result.p does not exist so we cannot read it\n' % label)
pass
# for obs in self.RefData:
# del self.RefData[obs][PT]
if len(Points) == 0:
logger.error('The lipid simulations have terminated with \x1b[1;91mno readable data\x1b[0m - this is a problem!\n')
raise RuntimeError
# Assign variable names to all the stuff in npt_result.p
Rhos, Vols, Potentials, Energies, Dips, Grads, GDips, \
Rho_errs, Alpha_errs, Kappa_errs, Cp_errs, Eps0_errs, NMols, Als, Al_errs, Scds, Scd_errs, LKappa_errs = ([Results[t][i] for t in range(len(Points))] for i in range(18))
# Determine the number of molecules
if len(set(NMols)) != 1:
logger.error(str(NMols))
logger.error('The above list should only contain one number - the number of molecules\n')
raise RuntimeError
else:
NMol = list(set(NMols))[0]
R = np.array(list(itertools.chain(*list(Rhos))))
V = np.array(list(itertools.chain(*list(Vols))))
E = np.array(list(itertools.chain(*list(Energies))))
Dx = np.array(list(itertools.chain(*list(d[:,0] for d in Dips))))
Dy = np.array(list(itertools.chain(*list(d[:,1] for d in Dips))))
Dz = np.array(list(itertools.chain(*list(d[:,2] for d in Dips))))
G = np.hstack(tuple(Grads))
GDx = np.hstack(tuple(gd[0] for gd in GDips))
GDy = np.hstack(tuple(gd[1] for gd in GDips))
GDz = np.hstack(tuple(gd[2] for gd in GDips))
A = np.array(list(itertools.chain(*list(Als))))
S = np.array(list(itertools.chain(*list(Scds))))
Rho_calc = OrderedDict([])
Rho_grad = OrderedDict([])
Rho_std = OrderedDict([])
Alpha_calc = OrderedDict([])
Alpha_grad = OrderedDict([])
Alpha_std = OrderedDict([])
Kappa_calc = OrderedDict([])
Kappa_grad = OrderedDict([])
Kappa_std = OrderedDict([])
Cp_calc = OrderedDict([])
Cp_grad = OrderedDict([])
Cp_std = OrderedDict([])
Eps0_calc = OrderedDict([])
Eps0_grad = OrderedDict([])
Eps0_std = OrderedDict([])
Al_calc = OrderedDict([])
Al_grad = OrderedDict([])
Al_std = OrderedDict([])
LKappa_calc = OrderedDict([])
LKappa_grad = OrderedDict([])
LKappa_std = OrderedDict([])
Scd_calc = OrderedDict([])
Scd_grad = OrderedDict([])
Scd_std = OrderedDict([])
# The unit that converts atmospheres * nm**3 into kj/mol :)
pvkj=0.061019351687175
# Run MBAR using the total energies. Required for estimates that use the kinetic energy.
BSims = len(BPoints)
Shots = len(Energies[0])
Shots_m = [len(i) for i in Energies]
N_k = np.ones(BSims)*Shots
# Use the value of the energy for snapshot t from simulation k at potential m
U_kln = np.zeros([BSims,BSims,Shots])
for m, PT in enumerate(BPoints):
T = PT[0]
P = PT[1] / 1.01325 if PT[2] == 'bar' else PT[1]
beta = 1. / (kb * T)
for k in range(BSims):
# The correct Boltzmann factors include PV.
# Note that because the Boltzmann factors are computed from the conditions at simulation "m",
# the pV terms must be rescaled to the pressure at simulation "m".
kk = Points.index(BPoints[k])
U_kln[k, m, :] = Energies[kk] + P*Vols[kk]*pvkj
U_kln[k, m, :] *= beta
W1 = None
if len(BPoints) > 1:
logger.info("Running MBAR analysis on %i states...\n" % len(BPoints))
mbar = pymbar.MBAR(U_kln, N_k, verbose=mbar_verbose, relative_tolerance=5.0e-8)
W1 = mbar.getWeights()
logger.info("Done\n")
elif len(BPoints) == 1:
W1 = np.ones((BPoints*Shots,BPoints))
W1 /= BPoints*Shots
def fill_weights(weights, phase_points, mbar_points, snapshots):
""" Fill in the weight matrix with MBAR weights where MBAR was run,
and equal weights otherwise. """
new_weights = np.zeros([len(phase_points)*snapshots,len(phase_points)])
for m, PT in enumerate(phase_points):
if PT in mbar_points:
mm = mbar_points.index(PT)
for kk, PT1 in enumerate(mbar_points):
k = phase_points.index(PT1)
logger.debug("Will fill W2[%i:%i,%i] with W1[%i:%i,%i]\n" % (k*snapshots,k*snapshots+snapshots,m,kk*snapshots,kk*snapshots+snapshots,mm))
new_weights[k*snapshots:(k+1)*snapshots,m] = weights[kk*snapshots:(kk+1)*snapshots,mm]
else:
logger.debug("Will fill W2[%i:%i,%i] with equal weights\n" % (m*snapshots,(m+1)*snapshots,m))
new_weights[m*snapshots:(m+1)*snapshots,m] = 1.0/snapshots
return new_weights
W2 = fill_weights(W1, Points, BPoints, Shots)
if self.do_self_pol:
EPol = self.polarization_correction(mvals)
GEPol = np.array([(f12d3p(fdwrap(self.polarization_correction, mvals, p), h = self.h, f0 = EPol)[0] if p in self.pgrad else 0.0) for p in range(self.FF.np)])
bar = printcool("Self-polarization correction to \nenthalpy of vaporization is % .3f kJ/mol%s" % (EPol, ", Derivative:" if AGrad else ""))
if AGrad:
self.FF.print_map(vals=GEPol)
logger.info(bar)
for i, PT in enumerate(Points):
T = PT[0]
P = PT[1] / 1.01325 if PT[2] == 'bar' else PT[1]
PV = P*V*pvkj
H = E + PV
# The weights that we want are the last ones.
W = flat(W2[:,i])
C = weight_info(W, PT, np.ones(len(Points), dtype=int)*Shots, verbose=mbar_verbose)
Gbar = flat(np.dot(G,col(W)))
mBeta = -1/kb/T
Beta = 1/kb/T
kT = kb*T
# Define some things to make the analytic derivatives easier.
def avg(vec):
return np.dot(W,vec)
def covde(vec):
return flat(np.dot(G,col(W*vec))) - avg(vec)*Gbar
def deprod(vec):
return flat(np.dot(G,col(W*vec)))
## Density.
Rho_calc[PT] = np.dot(W,R)
Rho_grad[PT] = mBeta*(flat(np.dot(G,col(W*R))) - np.dot(W,R)*Gbar)
## Ignore enthalpy.
## Thermal expansion coefficient.
Alpha_calc[PT] = 1e4 * (avg(H*V)-avg(H)*avg(V))/avg(V)/(kT*T)
GAlpha1 = -1 * Beta * deprod(H*V) * avg(V) / avg(V)**2
GAlpha2 = +1 * Beta * avg(H*V) * deprod(V) / avg(V)**2
GAlpha3 = deprod(V)/avg(V) - Gbar
GAlpha4 = Beta * covde(H)
Alpha_grad[PT] = 1e4 * (GAlpha1 + GAlpha2 + GAlpha3 + GAlpha4)/(kT*T)
## Isothermal compressibility.
bar_unit = 0.06022141793 * 1e6
Kappa_calc[PT] = bar_unit / kT * (avg(V**2)-avg(V)**2)/avg(V)
GKappa1 = +1 * Beta**2 * avg(V**2) * deprod(V) / avg(V)**2
GKappa2 = -1 * Beta**2 * avg(V) * deprod(V**2) / avg(V)**2
GKappa3 = +1 * Beta**2 * covde(V)
Kappa_grad[PT] = bar_unit*(GKappa1 + GKappa2 + GKappa3)
## Isobaric heat capacity.
Cp_calc[PT] = 1000/(4.184*NMol*kT*T) * (avg(H**2) - avg(H)**2)
if hasattr(self,'use_cvib_intra') and self.use_cvib_intra:
logger.debug("Adding " + str(self.RefData['devib_intra'][PT]) + " to the heat capacity\n")
Cp_calc[PT] += self.RefData['devib_intra'][PT]
if hasattr(self,'use_cvib_inter') and self.use_cvib_inter:
logger.debug("Adding " + str(self.RefData['devib_inter'][PT]) + " to the heat capacity\n")
Cp_calc[PT] += self.RefData['devib_inter'][PT]
GCp1 = 2*covde(H) * 1000 / 4.184 / (NMol*kT*T)
GCp2 = mBeta*covde(H**2) * 1000 / 4.184 / (NMol*kT*T)
GCp3 = 2*Beta*avg(H)*covde(H) * 1000 / 4.184 / (NMol*kT*T)
Cp_grad[PT] = GCp1 + GCp2 + GCp3
## Static dielectric constant.
prefactor = 30.348705333964077
D2 = avg(Dx**2)+avg(Dy**2)+avg(Dz**2)-avg(Dx)**2-avg(Dy)**2-avg(Dz)**2
Eps0_calc[PT] = 1.0 + prefactor*(D2/avg(V))/T
GD2 = 2*(flat(np.dot(GDx,col(W*Dx))) - avg(Dx)*flat(np.dot(GDx,col(W)))) - Beta*(covde(Dx**2) - 2*avg(Dx)*covde(Dx))
GD2 += 2*(flat(np.dot(GDy,col(W*Dy))) - avg(Dy)*flat(np.dot(GDy,col(W)))) - Beta*(covde(Dy**2) - 2*avg(Dy)*covde(Dy))
GD2 += 2*(flat(np.dot(GDz,col(W*Dz))) - avg(Dz)*flat(np.dot(GDz,col(W)))) - Beta*(covde(Dz**2) - 2*avg(Dz)*covde(Dz))
Eps0_grad[PT] = prefactor*(GD2/avg(V) - mBeta*covde(V)*D2/avg(V)**2)/T
## Average area per lipid
Al_calc[PT] = np.dot(W,A)
Al_grad[PT] = mBeta*(flat(np.dot(G,col(W*A))) - np.dot(W,A)*Gbar)
## Bilayer Isothermal compressibility.
A_m2 = A * 1e-18
kbT = 1.3806488e-23 * T
LKappa_calc[PT] = (1e3 * 2 * kbT / 128) * (avg(A_m2) / (avg(A_m2**2)-avg(A_m2)**2))
al_avg = avg(A_m2)
al_sq_avg = avg(A_m2**2)
al_avg_sq = al_avg**2
al_var = al_sq_avg - al_avg_sq
GLKappa1 = covde(A_m2) / al_var
GLKappa2 = (al_avg / al_var**2) * (covde(A_m2**2) - (2 * al_avg * covde(A)))
LKappa_grad[PT] = (1e3 * 2 * kbT / 128) * (GLKappa1 - GLKappa2)
## Deuterium order parameter
Scd_calc[PT] = np.dot(W,S)
# LPW: In case I did not do the conversion correctly, the line of code previously here was:
# Scd_grad[PT] = mBeta * (flat(np.average(np.mat(G) * (S * W[:, np.newaxis]), axis = 1)) - np.average(np.average(S * W[:, np.newaxis], axis = 0), axis = 0) * Gbar)
Scd_grad[PT] = mBeta * (flat(np.average(np.dot(G, (S * W[:, np.newaxis])), axis = 1)) - np.average(np.average(S * W[:, np.newaxis], axis = 0), axis = 0) * Gbar)
## Estimation of errors.
Rho_std[PT] = np.sqrt(sum(C**2 * np.array(Rho_errs)**2))
Alpha_std[PT] = np.sqrt(sum(C**2 * np.array(Alpha_errs)**2)) * 1e4
Kappa_std[PT] = np.sqrt(sum(C**2 * np.array(Kappa_errs)**2)) * 1e6
Cp_std[PT] = np.sqrt(sum(C**2 * np.array(Cp_errs)**2))
Eps0_std[PT] = np.sqrt(sum(C**2 * np.array(Eps0_errs)**2))
Al_std[PT] = np.sqrt(sum(C**2 * np.array(Al_errs)**2))
# LPW: In case I did not do the conversion correctly, the line of code previously here was:
# Scd_std[PT] = np.sqrt(sum(np.mat(C**2) * np.array(Scd_errs)**2))
Scd_std[PT] = np.sqrt(sum(np.dot(row(C**2), np.array(Scd_errs)**2)))
LKappa_std[PT] = np.sqrt(sum(C**2 * np.array(LKappa_errs)**2)) * 1e6
# Get contributions to the objective function
X_Rho, G_Rho, H_Rho, RhoPrint = self.objective_term(Points, 'rho', Rho_calc, Rho_std, Rho_grad, name="Density")
X_Alpha, G_Alpha, H_Alpha, AlphaPrint = self.objective_term(Points, 'alpha', Alpha_calc, Alpha_std, Alpha_grad, name="Thermal Expansion")
X_Kappa, G_Kappa, H_Kappa, KappaPrint = self.objective_term(Points, 'kappa', Kappa_calc, Kappa_std, Kappa_grad, name="Compressibility")
X_Cp, G_Cp, H_Cp, CpPrint = self.objective_term(Points, 'cp', Cp_calc, Cp_std, Cp_grad, name="Heat Capacity")
X_Eps0, G_Eps0, H_Eps0, Eps0Print = self.objective_term(Points, 'eps0', Eps0_calc, Eps0_std, Eps0_grad, name="Dielectric Constant")
X_Al, G_Al, H_Al, AlPrint = self.objective_term(Points, 'al', Al_calc, Al_std, Al_grad, name="Avg Area per Lipid")
X_Scd, G_Scd, H_Scd, ScdPrint = self.objective_term(Points, 'scd', Scd_calc, Scd_std, Scd_grad, name="Deuterium Order Parameter")
X_LKappa, G_LKappa, H_LKappa, LKappaPrint = self.objective_term(Points, 'lkappa', LKappa_calc, LKappa_std, LKappa_grad, name="Bilayer Compressibility")
Gradient = np.zeros(self.FF.np)
Hessian = np.zeros((self.FF.np,self.FF.np))
if X_Rho == 0: self.w_rho = 0.0
if X_Alpha == 0: self.w_alpha = 0.0
if X_Kappa == 0: self.w_kappa = 0.0
if X_Cp == 0: self.w_cp = 0.0
if X_Eps0 == 0: self.w_eps0 = 0.0
if X_Al == 0: self.w_al = 0.0
if X_Scd == 0: self.w_scd = 0.0
if X_LKappa == 0: self.w_lkappa = 0.0
if self.w_normalize:
w_tot = self.w_rho + self.w_alpha + self.w_kappa + self.w_cp + self.w_eps0 + self.w_al + self.w_scd + self.w_lkappa
else:
w_tot = 1.0
w_1 = self.w_rho / w_tot
w_3 = self.w_alpha / w_tot
w_4 = self.w_kappa / w_tot
w_5 = self.w_cp / w_tot
w_6 = self.w_eps0 / w_tot
w_7 = self.w_al / w_tot
w_8 = self.w_scd / w_tot
w_9 = self.w_lkappa / w_tot
Objective = w_1 * X_Rho + w_3 * X_Alpha + w_4 * X_Kappa + w_5 * X_Cp + w_6 * X_Eps0 + w_7 * X_Al + w_8 * X_Scd + w_9 * X_LKappa
if AGrad:
Gradient = w_1 * G_Rho + w_3 * G_Alpha + w_4 * G_Kappa + w_5 * G_Cp + w_6 * G_Eps0 + w_7 * G_Al + w_8 * G_Scd + w_9 * G_LKappa
if AHess:
Hessian = w_1 * H_Rho + w_3 * H_Alpha + w_4 * H_Kappa + w_5 * H_Cp + w_6 * H_Eps0 + w_7 * H_Al + w_8 * H_Scd + w_9 * H_LKappa
if not in_fd():
self.Xp = {"Rho" : X_Rho, "Alpha" : X_Alpha,
"Kappa" : X_Kappa, "Cp" : X_Cp, "Eps0" : X_Eps0, "Al" : X_Al, "Scd" : X_Scd, "LKappa" : X_LKappa}
self.Wp = {"Rho" : w_1, "Alpha" : w_3,
"Kappa" : w_4, "Cp" : w_5, "Eps0" : w_6, "Al" : w_7, "Scd" : w_8, "LKappa" : w_9}
self.Pp = {"Rho" : RhoPrint, "Alpha" : AlphaPrint,
"Kappa" : KappaPrint, "Cp" : CpPrint, "Eps0" : Eps0Print, "Al" : AlPrint, "Scd" : ScdPrint, "LKappa": LKappaPrint}
if AGrad:
self.Gp = {"Rho" : G_Rho, "Alpha" : G_Alpha,
"Kappa" : G_Kappa, "Cp" : G_Cp, "Eps0" : G_Eps0, "Al" : G_Al, "Scd" : G_Scd, "LKappa" : G_LKappa}
self.Objective = Objective
Answer = {'X':Objective, 'G':Gradient, 'H':Hessian}
return Answer
def is_backbone(dac):
return dac[1:3] in [["N", "CT"], ["CT", "C"], ["C", "N"], ["CT", "N"], ["C", "CT"], ["N", "C"]]
print AACodes
allbac = []
allaac = []
alldac = []
aadac = {}
for iAA, AA in enumerate(AACodes):
print "Detecting parameters for", AA
anac = build_atomname_to_atomclass(AA)
anac.update(build_atomname_to_atomclass("ACE"))
anac.update(build_atomname_to_atomclass("NME"))
M = Molecule(os.path.join(AADirs[iAA], "all.gro"))
aadac[AA] = []
for i in M.atomname:
if i not in anac.keys():
print "%s not in list of atom names" % i
for d in M.find_dihedrals():
if all([M.atomname[i] in anac for i in d]):
dac = [anac[M.atomname[i]] for i in d]
if not is_backbone(dac):
for mult in range(1, 7):
dstr = "#define torsion_%s_%s_%s_%s_%s_mult%i 0.0 0.0 %i" % (
AA,
dac[0],
dac[1],
dac[2],
dac[3],
#!/usr/bin/env python
from forcebalance.molecule import Molecule
from forcebalance.nifty import _exec
import os
np=""
if "CORES_PER_WORKER" in os.environ and int(os.environ["CORES_PER_WORKER"]) > 1:
np=" -np %i" % int(os.environ["CORES_PER_WORKER"])
_exec("touch opt.xyz")
_exec("touch energy.txt")
_exec("rm -f qchem.out.prev")
_exec("touch qchem.out.prev")
qcin = Molecule("qchem.in", ftype="qcin")
qcin.edit_qcrems({'geom_opt_max_cycles':'100'})
qcin.write("qchem.in")
_exec("qchem42 %s qchem.in qchem.out &> qchem.err" % np)
def special_criterion():
mk = 0
mx = 0
Cnvgd = {}
for ln, line in enumerate(open("qchem.out").readlines()):
if "Maximum optimization cycles reached" in line:
mx = 1
if "Maximum Tolerance Cnvgd?" in line:
mk = ln
if mk > 0 and ln > mk and ln <= mk+3:
s = line.split()
try:
class TINKER(Engine):
""" Engine for carrying out general purpose TINKER calculations. """
def __init__(self, name="tinker", **kwargs):
## Keyword args that aren't in this list are filtered out.
self.valkwd = ['tinker_key', 'tinkerpath', 'tinker_prm']
self.warn_vn = False
super(TINKER,self).__init__(name=name, **kwargs)
def setopts(self, **kwargs):
""" Called by __init__ ; Set TINKER-specific options. """
## The directory containing TINKER executables (e.g. dynamic)
if 'tinkerpath' in kwargs:
self.tinkerpath = kwargs['tinkerpath']
if not os.path.exists(os.path.join(self.tinkerpath,"dynamic")):
warn_press_key("The 'dynamic' executable indicated by %s doesn't exist! (Check tinkerpath)" \
% os.path.join(self.tinkerpath,"dynamic"))
else:
warn_once("The 'tinkerpath' option was not specified; using default.")
if which('mdrun') == '':
warn_press_key("Please add TINKER executables to the PATH or specify tinkerpath.")
self.tinkerpath = which('dynamic')
def readsrc(self, **kwargs):
""" Called by __init__ ; read files from the source directory. """
self.key = onefile(kwargs.get('tinker_key'), 'key')
self.prm = onefile(kwargs.get('tinker_prm'), 'prm')
if 'mol' in kwargs:
self.mol = kwargs['mol']
else:
crdfile = onefile(kwargs.get('coords'), 'arc', err=True)
self.mol = Molecule(crdfile)
def calltinker(self, command, stdin=None, print_to_screen=False, print_command=False, **kwargs):
""" Call TINKER; prepend the tinkerpath to calling the TINKER program. """
csplit = command.split()
# Sometimes the engine changes dirs and the key goes missing, so we link it.
if "%s.key" % self.name in csplit and not os.path.exists("%s.key" % self.name):
LinkFile(self.abskey, "%s.key" % self.name)
prog = os.path.join(self.tinkerpath, csplit[0])
csplit[0] = prog
o = _exec(' '.join(csplit), stdin=stdin, print_to_screen=print_to_screen, print_command=print_command, rbytes=1024, **kwargs)
# Determine the TINKER version number.
for line in o[:10]:
if "Version" in line:
vw = line.split()[2]
if len(vw.split('.')) <= 2:
vn = float(vw)
else:
vn = float(vw.split('.')[:2])
vn_need = 6.3
try:
if vn < vn_need:
if self.warn_vn:
warn_press_key("ForceBalance requires TINKER %.1f - unexpected behavior with older versions!" % vn_need)
self.warn_vn = True
except:
logger.error("Unable to determine TINKER version number!\n")
raise RuntimeError
for line in o[-10:]:
# Catch exceptions since TINKER does not have exit status.
if "TINKER is Unable to Continue" in line:
for l in o:
logger.error("%s\n" % l)
time.sleep(1)
logger.error("TINKER may have crashed! (See above output)\nThe command was: %s\nThe directory was: %s\n" % (' '.join(csplit), os.getcwd()))
raise RuntimeError
break
for line in o:
if 'D+' in line:
logger.info(line+'\n')
warn_press_key("TINKER returned a very large floating point number! (See above line; will give error on parse)")
return o
def prepare(self, pbc=False, **kwargs):
""" Called by __init__ ; prepare the temp directory and figure out the topology. """
# Call TINKER but do nothing to figure out the version number.
o = self.calltinker("dynamic", persist=1, print_error=False)
self.rigid = False
## Attempt to set some TINKER options.
tk_chk = []
tk_opts = OrderedDict([("digits", "10"), ("archive", "")])
tk_defs = OrderedDict()
prmtmp = False
if hasattr(self,'FF'):
if not os.path.exists(self.FF.tinkerprm):
# If the parameter files don't already exist, create them for the purpose of
# preparing the engine, but then delete them afterward.
prmtmp = True
self.FF.make(np.zeros(self.FF.np))
if self.FF.rigid_water:
tk_opts["rattle"] = "water"
self.rigid = True
if self.FF.amoeba_pol == 'mutual':
tk_opts['polarization'] = 'mutual'
if self.FF.amoeba_eps != None:
tk_opts['polar-eps'] = str(self.FF.amoeba_eps)
else:
tk_defs['polar-eps'] = '1e-6'
elif self.FF.amoeba_pol == 'direct':
tk_opts['polarization'] = 'direct'
else:
warn_press_key("Using TINKER without explicitly specifying AMOEBA settings. Are you sure?")
self.prm = self.FF.tinkerprm
prmfnm = self.FF.tinkerprm
elif self.prm:
prmfnm = self.prm
else:
prmfnm = None
# Periodic boundary conditions may come from the TINKER .key file.
keypbc = False
minbox = 1e10
if self.key:
for line in open(os.path.join(self.srcdir, self.key)).readlines():
s = line.split()
if len(s) > 0 and s[0].lower() == 'a-axis':
keypbc = True
minbox = float(s[1])
if len(s) > 0 and s[0].lower() == 'b-axis' and float(s[1]) < minbox:
minbox = float(s[1])
if len(s) > 0 and s[0].lower() == 'c-axis' and float(s[1]) < minbox:
minbox = float(s[1])
if keypbc and (not pbc):
warn_once("Deleting PBC options from the .key file.")
tk_opts['a-axis'] = None
tk_opts['b-axis'] = None
tk_opts['c-axis'] = None
tk_opts['alpha'] = None
tk_opts['beta'] = None
tk_opts['gamma'] = None
if pbc:
if (not keypbc) and 'boxes' not in self.mol.Data:
logger.error("Periodic boundary conditions require either (1) a-axis to be in the .key file or (b) boxes to be in the coordinate file.\n")
raise RuntimeError
self.pbc = pbc
if pbc:
tk_opts['ewald'] = ''
if minbox <= 10:
warn_press_key("Periodic box is set to less than 10 Angstroms across")
# TINKER likes to use up to 7.0 Angstrom for PME cutoffs
rpme = 0.05*(float(int(minbox - 1))) if minbox <= 15 else 7.0
tk_defs['ewald-cutoff'] = "%f" % rpme
# TINKER likes to use up to 9.0 Angstrom for vdW cutoffs
rvdw = 0.05*(float(int(minbox - 1))) if minbox <= 19 else 9.0
tk_defs['vdw-cutoff'] = "%f" % rvdw
if (minbox*0.5 - rpme) > 2.5 and (minbox*0.5 - rvdw) > 2.5:
tk_defs['neighbor-list'] = ''
elif (minbox*0.5 - rpme) > 2.5:
tk_defs['mpole-list'] = ''
else:
tk_opts['ewald'] = None
tk_opts['ewald-cutoff'] = None
tk_opts['vdw-cutoff'] = None
# This seems to have no effect on the kinetic energy.
# tk_opts['remove-inertia'] = '0'
write_key("%s.key" % self.name, tk_opts, os.path.join(self.srcdir, self.key) if self.key else None, tk_defs, verbose=False, prmfnm=prmfnm)
self.abskey = os.path.abspath("%s.key")
self.mol[0].write(os.path.join("%s.xyz" % self.name), ftype="tinker")
## If the coordinates do not come with TINKER suffixes then throw an error.
self.mol.require('tinkersuf')
## Call analyze to read information needed to build the atom lists.
o = self.calltinker("analyze %s.xyz P,C" % (self.name), stdin="ALL")
## Parse the output of analyze.
mode = 0
self.AtomMask = []
self.AtomLists = defaultdict(list)
ptype_dict = {'atom': 'A', 'vsite': 'D'}
G = nx.Graph()
for line in o:
s = line.split()
if len(s) == 0: continue
if "Atom Type Definition Parameters" in line:
mode = 1
if mode == 1:
if isint(s[0]): mode = 2
if mode == 2:
if isint(s[0]):
mass = float(s[5])
self.AtomLists['Mass'].append(mass)
if mass < 1.0:
# Particles with mass less than one count as virtual sites.
self.AtomLists['ParticleType'].append('D')
else:
self.AtomLists['ParticleType'].append('A')
self.AtomMask.append(mass >= 1.0)
else:
mode = 0
if "List of 1-2 Connected Atomic Interactions" in line:
mode = 3
if mode == 3:
if isint(s[0]): mode = 4
if mode == 4:
if isint(s[0]):
a = int(s[0])
b = int(s[1])
G.add_node(a)
G.add_node(b)
G.add_edge(a, b)
else: mode = 0
# Use networkx to figure out a list of molecule numbers.
if len(G.nodes()) > 0:
# The following code only works in TINKER 6.2
gs = nx.connected_component_subgraphs(G)
tmols = [gs[i] for i in np.argsort(np.array([min(g.nodes()) for g in gs]))]
mnodes = [m.nodes() for m in tmols]
self.AtomLists['MoleculeNumber'] = [[i+1 in m for m in mnodes].index(1) for i in range(self.mol.na)]
else:
grouped = [i.L() for i in self.mol.molecules]
self.AtomLists['MoleculeNumber'] = [[i in g for g in grouped].index(1) for i in range(self.mol.na)]
if prmtmp:
for f in self.FF.fnms:
os.unlink(f)
def optimize(self, shot=0, method="newton", crit=1e-4):
""" Optimize the geometry and align the optimized geometry to the starting geometry. """
if os.path.exists('%s.xyz_2' % self.name):
os.unlink('%s.xyz_2' % self.name)
self.mol[shot].write('%s.xyz' % self.name, ftype="tinker")
if method == "newton":
if self.rigid: optprog = "optrigid"
else: optprog = "optimize"
elif method == "bfgs":
if self.rigid: optprog = "minrigid"
else: optprog = "minimize"
o = self.calltinker("%s %s.xyz %f" % (optprog, self.name, crit))
# Silently align the optimized geometry.
M12 = Molecule("%s.xyz" % self.name, ftype="tinker") + Molecule("%s.xyz_2" % self.name, ftype="tinker")
if not self.pbc:
M12.align(center=False)
M12[1].write("%s.xyz_2" % self.name, ftype="tinker")
rmsd = M12.ref_rmsd(0)[1]
cnvgd = 0
mode = 0
for line in o:
s = line.split()
if len(s) == 0: continue
if "Optimally Conditioned Variable Metric Optimization" in line: mode = 1
if "Limited Memory BFGS Quasi-Newton Optimization" in line: mode = 1
if mode == 1 and isint(s[0]): mode = 2
if mode == 2:
if isint(s[0]): E = float(s[1])
else: mode = 0
if "Normal Termination" in line:
cnvgd = 1
if not cnvgd:
for line in o:
logger.info(str(line) + '\n')
logger.info("The minimization did not converge in the geometry optimization - printout is above.\n")
return E, rmsd
def evaluate_(self, xyzin, force=False, dipole=False):
"""
Utility function for computing energy, and (optionally) forces and dipoles using TINKER.
Inputs:
xyzin: TINKER .xyz file name.
force: Switch for calculating the force.
dipole: Switch for calculating the dipole.
Outputs:
Result: Dictionary containing energies, forces and/or dipoles.
"""
Result = OrderedDict()
# If we want the dipoles (or just energies), analyze is the way to go.
if dipole or (not force):
oanl = self.calltinker("analyze %s -k %s" % (xyzin, self.name), stdin="G,E,M", print_to_screen=False)
# Read potential energy and dipole from file.
eanl = []
dip = []
for line in oanl:
s = line.split()
if 'Total Potential Energy : ' in line:
eanl.append(float(s[4]) * 4.184)
if dipole:
if 'Dipole X,Y,Z-Components :' in line:
dip.append([float(s[i]) for i in range(-3,0)])
Result["Energy"] = np.array(eanl)
Result["Dipole"] = np.array(dip)
# If we want forces, then we need to call testgrad.
if force:
E = []
F = []
Fi = []
o = self.calltinker("testgrad %s -k %s y n n" % (xyzin, self.name))
i = 0
ReadFrc = 0
for line in o:
s = line.split()
if "Total Potential Energy" in line:
E.append(float(s[4]) * 4.184)
if "Cartesian Gradient Breakdown over Individual Atoms" in line:
ReadFrc = 1
if ReadFrc and len(s) == 6 and all([s[0] == 'Anlyt',isint(s[1]),isfloat(s[2]),isfloat(s[3]),isfloat(s[4]),isfloat(s[5])]):
ReadFrc = 2
if self.AtomMask[i]:
Fi += [-1 * float(j) * 4.184 * 10 for j in s[2:5]]
i += 1
if ReadFrc == 2 and len(s) < 6:
ReadFrc = 0
F.append(Fi)
Fi = []
i = 0
Result["Energy"] = np.array(E)
Result["Force"] = np.array(F)
return Result
def energy_force_one(self, shot):
""" Computes the energy and force using TINKER for one snapshot. """
self.mol[shot].write("%s.xyz" % self.name, ftype="tinker")
Result = self.evaluate_("%s.xyz" % self.name, force=True)
return np.hstack((Result["Energy"].reshape(-1,1), Result["Force"]))
def energy(self):
""" Computes the energy using TINKER over a trajectory. """
if hasattr(self, 'md_trajectory') :
x = self.md_trajectory
else:
x = "%s.xyz" % self.name
self.mol.write(x, ftype="tinker")
return self.evaluate_(x)["Energy"]
def energy_force(self):
""" Computes the energy and force using TINKER over a trajectory. """
if hasattr(self, 'md_trajectory') :
x = self.md_trajectory
else:
x = "%s.xyz" % self.name
self.mol.write(x, ftype="tinker")
Result = self.evaluate_(x, force=True)
return np.hstack((Result["Energy"].reshape(-1,1), Result["Force"]))
def energy_dipole(self):
""" Computes the energy and dipole using TINKER over a trajectory. """
if hasattr(self, 'md_trajectory') :
x = self.md_trajectory
else:
x = "%s.xyz" % self.name
self.mol.write(x, ftype="tinker")
Result = self.evaluate_(x, dipole=True)
return np.hstack((Result["Energy"].reshape(-1,1), Result["Dipole"]))
def normal_modes(self, shot=0, optimize=True):
# This line actually runs TINKER
if optimize:
self.optimize(shot, crit=1e-6)
o = self.calltinker("vibrate %s.xyz_2 a" % (self.name))
else:
warn_once("Asking for normal modes without geometry optimization?")
self.mol[shot].write('%s.xyz' % self.name, ftype="tinker")
o = self.calltinker("vibrate %s.xyz a" % (self.name))
# Read the TINKER output. The vibrational frequencies are ordered.
# The six modes with frequencies closest to zero are ignored
readev = False
calc_eigvals = []
calc_eigvecs = []
for line in o:
s = line.split()
if "Vibrational Normal Mode" in line:
freq = float(s[-2])
readev = False
calc_eigvals.append(freq)
calc_eigvecs.append([])
elif "Atom" in line and "Delta X" in line:
readev = True
elif readev and len(s) == 4 and all([isint(s[0]), isfloat(s[1]), isfloat(s[2]), isfloat(s[3])]):
calc_eigvecs[-1].append([float(i) for i in s[1:]])
calc_eigvals = np.array(calc_eigvals)
calc_eigvecs = np.array(calc_eigvecs)
# Sort by frequency absolute value and discard the six that are closest to zero
calc_eigvecs = calc_eigvecs[np.argsort(np.abs(calc_eigvals))][6:]
calc_eigvals = calc_eigvals[np.argsort(np.abs(calc_eigvals))][6:]
# Sort again by frequency
calc_eigvecs = calc_eigvecs[np.argsort(calc_eigvals)]
calc_eigvals = calc_eigvals[np.argsort(calc_eigvals)]
os.system("rm -rf *.xyz_* *.[0-9][0-9][0-9]")
return calc_eigvals, calc_eigvecs
def multipole_moments(self, shot=0, optimize=True, polarizability=False):
""" Return the multipole moments of the 1st snapshot in Debye and Buckingham units. """
# This line actually runs TINKER
if optimize:
self.optimize(shot, crit=1e-6)
o = self.calltinker("analyze %s.xyz_2 M" % (self.name))
else:
self.mol[shot].write('%s.xyz' % self.name, ftype="tinker")
o = self.calltinker("analyze %s.xyz M" % (self.name))
# Read the TINKER output.
qn = -1
ln = 0
for line in o:
s = line.split()
if "Dipole X,Y,Z-Components" in line:
dipole_dict = OrderedDict(zip(['x','y','z'], [float(i) for i in s[-3:]]))
elif "Quadrupole Moment Tensor" in line:
qn = ln
quadrupole_dict = OrderedDict([('xx',float(s[-3]))])
elif qn > 0 and ln == qn + 1:
quadrupole_dict['xy'] = float(s[-3])
quadrupole_dict['yy'] = float(s[-2])
elif qn > 0 and ln == qn + 2:
quadrupole_dict['xz'] = float(s[-3])
quadrupole_dict['yz'] = float(s[-2])
quadrupole_dict['zz'] = float(s[-1])
ln += 1
calc_moments = OrderedDict([('dipole', dipole_dict), ('quadrupole', quadrupole_dict)])
if polarizability:
if optimize:
o = self.calltinker("polarize %s.xyz_2" % (self.name))
else:
o = self.calltinker("polarize %s.xyz" % (self.name))
# Read the TINKER output.
pn = -1
ln = 0
polarizability_dict = OrderedDict()
for line in o:
s = line.split()
if "Molecular Polarizability Tensor" in line:
pn = ln
elif pn > 0 and ln == pn + 2:
polarizability_dict['xx'] = float(s[-3])
polarizability_dict['yx'] = float(s[-2])
polarizability_dict['zx'] = float(s[-1])
elif pn > 0 and ln == pn + 3:
polarizability_dict['xy'] = float(s[-3])
polarizability_dict['yy'] = float(s[-2])
polarizability_dict['zy'] = float(s[-1])
elif pn > 0 and ln == pn + 4:
polarizability_dict['xz'] = float(s[-3])
polarizability_dict['yz'] = float(s[-2])
polarizability_dict['zz'] = float(s[-1])
ln += 1
calc_moments['polarizability'] = polarizability_dict
os.system("rm -rf *.xyz_* *.[0-9][0-9][0-9]")
print polarizability
print calc_moments
return calc_moments
def energy_rmsd(self, shot=0, optimize=True):
""" Calculate energy of the selected structure (optionally minimize and return the minimized energy and RMSD). In kcal/mol. """
rmsd = 0.0
# This line actually runs TINKER
# xyzfnm = sysname+".xyz"
if optimize:
E_, rmsd = self.optimize(shot)
o = self.calltinker("analyze %s.xyz_2 E" % self.name)
#----
# Two equivalent ways to get the RMSD, here for reference.
#----
# M1 = Molecule("%s.xyz" % self.name, ftype="tinker")
# M2 = Molecule("%s.xyz_2" % self.name, ftype="tinker")
# M1 += M2
# rmsd = M1.ref_rmsd(0)[1]
#----
# oo = self.calltinker("superpose %s.xyz %s.xyz_2 1 y u n 0" % (self.name, self.name))
# for line in oo:
# if "Root Mean Square Distance" in line:
# rmsd = float(line.split()[-1])
#----
os.system("rm %s.xyz_2" % self.name)
else:
o = self.calltinker("analyze %s.xyz E" % self.name)
# Read the TINKER output.
E = None
for line in o:
if "Total Potential Energy" in line:
E = float(line.split()[-2].replace('D','e'))
if E == None:
logger.error("Total potential energy wasn't encountered when calling analyze!\n")
raise RuntimeError
if optimize and abs(E-E_) > 0.1:
warn_press_key("Energy from optimize and analyze aren't the same (%.3f vs. %.3f)" % (E, E_))
return E, rmsd
def interaction_energy(self, fraga, fragb):
""" Calculate the interaction energy for two fragments. """
self.A = TINKER(name="A", mol=self.mol.atom_select(fraga), tinker_key="%s.key" % self.name, tinkerpath=self.tinkerpath)
self.B = TINKER(name="B", mol=self.mol.atom_select(fragb), tinker_key="%s.key" % self.name, tinkerpath=self.tinkerpath)
# Interaction energy needs to be in kcal/mol.
return (self.energy() - self.A.energy() - self.B.energy()) / 4.184
def molecular_dynamics(self, nsteps, timestep, temperature=None, pressure=None, nequil=0, nsave=1000, minimize=True, anisotropic=False, threads=1, verbose=False, **kwargs):
"""
Method for running a molecular dynamics simulation.
Required arguments:
nsteps = (int) Number of total time steps
timestep = (float) Time step in FEMTOSECONDS
temperature = (float) Temperature control (Kelvin)
pressure = (float) Pressure control (atmospheres)
nequil = (int) Number of additional time steps at the beginning for equilibration
nsave = (int) Step interval for saving and printing data
minimize = (bool) Perform an energy minimization prior to dynamics
threads = (int) Specify how many OpenMP threads to use
Returns simulation data:
Rhos = (array) Density in kilogram m^-3
Potentials = (array) Potential energies
Kinetics = (array) Kinetic energies
Volumes = (array) Box volumes
Dips = (3xN array) Dipole moments
EComps = (dict) Energy components
"""
md_defs = OrderedDict()
md_opts = OrderedDict()
# Print out averages only at the end.
md_opts["printout"] = nsave
md_opts["openmp-threads"] = threads
# Langevin dynamics for temperature control.
if temperature != None:
md_defs["integrator"] = "stochastic"
else:
md_defs["integrator"] = "beeman"
md_opts["thermostat"] = None
# Periodic boundary conditions.
if self.pbc:
md_opts["vdw-correction"] = ''
if temperature != None and pressure != None:
md_defs["integrator"] = "beeman"
md_defs["thermostat"] = "bussi"
md_defs["barostat"] = "montecarlo"
if anisotropic:
md_opts["aniso-pressure"] = ''
elif pressure != None:
warn_once("Pressure is ignored because temperature is turned off.")
else:
if pressure != None:
warn_once("Pressure is ignored because pbc is set to False.")
# Use stochastic dynamics for the gas phase molecule.
# If we use the regular integrators it may miss
# six degrees of freedom in calculating the kinetic energy.
md_opts["barostat"] = None
eq_opts = deepcopy(md_opts)
if self.pbc and temperature != None and pressure != None:
eq_opts["integrator"] = "beeman"
eq_opts["thermostat"] = "bussi"
eq_opts["barostat"] = "berendsen"
if minimize:
if verbose: logger.info("Minimizing the energy...")
self.optimize(method="bfgs", crit=1)
os.system("mv %s.xyz_2 %s.xyz" % (self.name, self.name))
if verbose: logger.info("Done\n")
# Run equilibration.
if nequil > 0:
write_key("%s-eq.key" % self.name, eq_opts, "%s.key" % self.name, md_defs)
if verbose: printcool("Running equilibration dynamics", color=0)
if self.pbc and pressure != None:
self.calltinker("dynamic %s -k %s-eq %i %f %f 4 %f %f" % (self.name, self.name, nequil, timestep, float(nsave*timestep)/1000,
temperature, pressure), print_to_screen=verbose)
else:
self.calltinker("dynamic %s -k %s-eq %i %f %f 2 %f" % (self.name, self.name, nequil, timestep, float(nsave*timestep)/1000,
temperature), print_to_screen=verbose)
os.system("rm -f %s.arc" % (self.name))
# Run production.
if verbose: printcool("Running production dynamics", color=0)
write_key("%s-md.key" % self.name, md_opts, "%s.key" % self.name, md_defs)
if self.pbc and pressure != None:
odyn = self.calltinker("dynamic %s -k %s-md %i %f %f 4 %f %f" % (self.name, self.name, nsteps, timestep, float(nsave*timestep/1000),
temperature, pressure), print_to_screen=verbose)
else:
odyn = self.calltinker("dynamic %s -k %s-md %i %f %f 2 %f" % (self.name, self.name, nsteps, timestep, float(nsave*timestep/1000),
temperature), print_to_screen=verbose)
# Gather information.
os.system("mv %s.arc %s-md.arc" % (self.name, self.name))
self.md_trajectory = "%s-md.arc" % self.name
edyn = []
kdyn = []
temps = []
for line in odyn:
s = line.split()
if 'Current Potential' in line:
edyn.append(float(s[2]))
if 'Current Kinetic' in line:
kdyn.append(float(s[2]))
if len(s) > 0 and s[0] == 'Temperature' and s[2] == 'Kelvin':
temps.append(float(s[1]))
# Potential and kinetic energies converted to kJ/mol.
edyn = np.array(edyn) * 4.184
kdyn = np.array(kdyn) * 4.184
temps = np.array(temps)
if verbose: logger.info("Post-processing to get the dipole moments\n")
oanl = self.calltinker("analyze %s-md.arc" % self.name, stdin="G,E,M", print_to_screen=False)
# Read potential energy and dipole from file.
eanl = []
dip = []
mass = 0.0
ecomp = OrderedDict()
havekeys = set()
first_shot = True
for ln, line in enumerate(oanl):
strip = line.strip()
s = line.split()
if 'Total System Mass' in line:
mass = float(s[-1])
if 'Total Potential Energy : ' in line:
eanl.append(float(s[4]))
if 'Dipole X,Y,Z-Components :' in line:
dip.append([float(s[i]) for i in range(-3,0)])
if first_shot:
for key in eckeys:
if strip.startswith(key):
if key in ecomp:
ecomp[key].append(float(s[-2])*4.184)
else:
ecomp[key] = [float(s[-2])*4.184]
if key in havekeys:
first_shot = False
havekeys.add(key)
else:
for key in havekeys:
if strip.startswith(key):
if key in ecomp:
ecomp[key].append(float(s[-2])*4.184)
else:
ecomp[key] = [float(s[-2])*4.184]
for key in ecomp:
ecomp[key] = np.array(ecomp[key])
ecomp["Potential Energy"] = edyn
ecomp["Kinetic Energy"] = kdyn
ecomp["Temperature"] = temps
ecomp["Total Energy"] = edyn+kdyn
# Energies in kilojoules per mole
eanl = np.array(eanl) * 4.184
# Dipole moments in debye
dip = np.array(dip)
# Volume of simulation boxes in cubic nanometers
# Conversion factor derived from the following:
# In [22]: 1.0 * gram / mole / (1.0 * nanometer)**3 / AVOGADRO_CONSTANT_NA / (kilogram/meter**3)
# Out[22]: 1.6605387831627252
conv = 1.6605387831627252
if self.pbc:
vol = np.array([BuildLatticeFromLengthsAngles(*[float(j) for j in line.split()]).V \
for line in open("%s-md.arc" % self.name).readlines() \
if (len(line.split()) == 6 and isfloat(line.split()[1]) \
and all([isfloat(i) for i in line.split()[:6]]))]) / 1000
rho = conv * mass / vol
else:
vol = None
rho = None
prop_return = OrderedDict()
prop_return.update({'Rhos': rho, 'Potentials': edyn, 'Kinetics': kdyn, 'Volumes': vol, 'Dips': dip, 'Ecomps': ecomp})
return prop_return
def cand(dih):
# Make sure two center atoms aren't out of order
if (dih[1] > dih[2]):
return (dih[3], dih[2], dih[1], dih[0])
# Two center atoms are equal but 1st and 4th are out of order
elif dih[1] == dih[2] and dih[0] > dih[3]:
return (dih[3], dih[2], dih[1], dih[0])
else:
return dih
hilite = set()
for dnm in os.listdir("../targets"):
if 'SER' not in dnm: continue
if 'chi1chi2' in dnm: continue
print dnm
M = Molecule(os.path.join("../targets", dnm, 'all.arc'))
atomtypes = [int(suf.split()[0]) for suf in M.tinkersuf]
# for ia, a in enumerate(atomtypes):
# print ia, acdict[a], acnames[acdict[a]]
set_dclass = set()
for dih in M.find_dihedrals():
dclass = cand(tuple(acdict[atomtypes[i]] for i in dih))
# Do not highlight backbone torsions.
if dclass[1] in exc_mid and dclass[2] in exc_mid: continue
# Do not highlight methyl hydrogens.
if dclass[0] in exc_end or dclass[3] in exc_end: continue
hilite.add(tdict[dclass])
tatoms[tdict[dclass]].append(dih)
set_dclass.add(dclass)
for d in sorted(list(set_dclass)):
print d
def do_quantum(wq_port):
M = Molecule('shots.gro')
M.add_quantum('../settings/qchem.in')
# Special hack to add TIP3P waters.
if os.path.exists('waters.gro'):
print("Found waters.gro, loading as external waters and adding SPC charges.")
Mext = Molecule('waters.gro')
Q = col([-0.82 if (i%3==0) else 0.41 for i in range(Mext.na)])
Qext = [np.hstack((xyz, Q)) for xyz in Mext.xyzs]
M.qm_extchgs = Qext
# End special hack.
digits = len(str(len(M)-1))
formstr = '\"%%0%ii\"' % digits
def read_quantum():
Result = None
os.chdir('calcs')
for i in range(M.ns):
dnm = eval(formstr % i)
print("\rNow in directory %i" % i, end=' ')
if os.path.exists(dnm):
os.chdir(dnm)
if os.path.exists('qchem.out'):
Output = Molecule('qchem.out')
if os.path.exists('plot.esp'):
ESP = Molecule('plot.esp')
#print ESP.Data.keys()
Output.qm_espxyzs = list(ESP.qm_espxyzs)
Output.qm_espvals = list(ESP.qm_espvals)
#Output += Molecule('plot.esp')
if Result == None:
Result = Output
else:
Result += Output
else:
raise Exception("The output file %s doesn't exist." % os.path.abspath('qchem.out'))
os.chdir('..')
else:
raise Exception("The subdirectory %s doesn't exist." % os.path.abspath(dnm))
os.chdir('..')
return Result
def run_quantum():
ESP = create_esp_surfaces(M)
work_queue.set_debug_flag('all')
wq = work_queue.WorkQueue(wq_port, exclusive=False, shutdown=False)
wq.specify_name('forcebalance')
os.makedirs('calcs')
os.chdir('calcs')
for i in range(M.ns):
dnm = eval(formstr % i)
os.makedirs(dnm)
os.chdir(dnm)
M.edit_qcrems({'igdesp':len(ESP[i])})
M.write("qchem.in", select=i)
ESPBohr = np.array(ESP[i]) / bohr2ang
np.savetxt('ESPGrid',ESPBohr)
print("Queueing up job", dnm)
queue_up(wq, command = 'qchem40 qchem.in qchem.out',
input_files = ["qchem.in", "ESPGrid"],
output_files = ["qchem.out", "plot.esp", "efield.dat"], verbose=False)
os.chdir('..')
for i in range(M.ns):
wq_wait(wq)
os.chdir('..')
if os.path.exists('calcs'):
print("calcs directory exists. Reading calculation results.")
Result = read_quantum()
else:
print("calcs directory doesn't exist. Setting up and running calculations.")
run_quantum()
print("Now reading calculation results.")
Result = read_quantum()
print("Writing results to qdata.txt.")
Result.write('qdata.txt')
return Result
#!/usr/bin/env python
from builtins import range
from forcebalance.molecule import Molecule
import os, sys
# Load in the Gromacs .gro file to be converted to TINKER format.
M = Molecule(sys.argv[1])
# Build the line suffix for the TINKER format.
tinkersuf = []
for i in range(M.na):
if i%3==0:
tinkersuf.append("%5i %5i %5i" % (1, i+2, i+3))
else:
tinkersuf.append("%5i %5i" % (2, i-i%3+1))
M.tinkersuf = tinkersuf
# Delete the periodic box.
del M.Data['boxes']
# Write the TINKER output format.
M.write(os.path.splitext(sys.argv[1])[0]+'.xyz', ftype='tinker')
def __init__(self,options,tgt_opts,forcefield):
# Initialize base class
super(Lipid,self).__init__(options,tgt_opts,forcefield)
# Weight of the density
self.set_option(tgt_opts,'w_rho',forceprint=True)
# Weight of the thermal expansion coefficient
self.set_option(tgt_opts,'w_alpha',forceprint=True)
# Weight of the isothermal compressibility
self.set_option(tgt_opts,'w_kappa',forceprint=True)
# Weight of the isobaric heat capacity
self.set_option(tgt_opts,'w_cp',forceprint=True)
# Weight of the dielectric constant
self.set_option(tgt_opts,'w_eps0',forceprint=True)
# Weight of the area per lipid
self.set_option(tgt_opts,'w_al',forceprint=True)
# Weight of the bilayer isothermal compressibility
self.set_option(tgt_opts,'w_lkappa',forceprint=True)
# Weight of the deuterium order parameter
self.set_option(tgt_opts,'w_scd',forceprint=True)
# Normalize the property contributions to the objective function
self.set_option(tgt_opts,'w_normalize',forceprint=True)
# Optionally pause on the zeroth step
self.set_option(tgt_opts,'manual')
# Number of time steps in the lipid "equilibration" run
self.set_option(tgt_opts,'lipid_eq_steps',forceprint=True)
# Number of time steps in the lipid "production" run
self.set_option(tgt_opts,'lipid_md_steps',forceprint=True)
# Number of time steps in the gas "equilibration" run
self.set_option(tgt_opts,'gas_eq_steps',forceprint=False)
# Number of time steps in the gas "production" run
self.set_option(tgt_opts,'gas_md_steps',forceprint=False)
# Cutoff for nonbonded interactions in the liquid
if tgt_opts['nonbonded_cutoff'] is not None:
self.set_option(tgt_opts,'nonbonded_cutoff')
# Cutoff for vdW interactions if different from other nonbonded interactions
if tgt_opts['vdw_cutoff'] is not None:
self.set_option(tgt_opts,'vdw_cutoff')
# Time step length (in fs) for the lipid production run
self.set_option(tgt_opts,'lipid_timestep',forceprint=True)
# Time interval (in ps) for writing coordinates
self.set_option(tgt_opts,'lipid_interval',forceprint=True)
# Time step length (in fs) for the gas production run
self.set_option(tgt_opts,'gas_timestep',forceprint=True)
# Time interval (in ps) for writing coordinates
self.set_option(tgt_opts,'gas_interval',forceprint=True)
# Minimize the energy prior to running any dynamics
self.set_option(tgt_opts,'minimize_energy',forceprint=True)
# Isolated dipole (debye) for analytic self-polarization correction.
self.set_option(tgt_opts,'self_pol_mu0',forceprint=True)
# Molecular polarizability (ang**3) for analytic self-polarization correction.
self.set_option(tgt_opts,'self_pol_alpha',forceprint=True)
# Set up the simulation object for self-polarization correction.
self.do_self_pol = (self.self_pol_mu0 > 0.0 and self.self_pol_alpha > 0.0)
# Enable anisotropic periodic box
self.set_option(tgt_opts,'anisotropic_box',forceprint=True)
# Whether to save trajectories (0 = never, 1 = delete after good step, 2 = keep all)
self.set_option(tgt_opts,'save_traj')
#======================================#
# Variables which are set here #
#======================================#
## LPW 2018-02-11: This is set to True if the target calculates
## a single-point property over several existing snapshots.
self.loop_over_snapshots = False
# List of trajectory files that may be deleted if self.save_traj == 1.
self.last_traj = []
# Extra files to be copied back at the end of a run.
self.extra_output = []
# Read the reference data
self.read_data()
# Read in lipid starting coordinates.
if 'n_ic' in self.RefData:
# Linked IC folder into the temp-directory.
self.nptfiles += ["IC"]
# Store IC frames in a dictionary.
self.lipid_mols = OrderedDict()
self.lipid_mols_new = OrderedDict()
for pt in self.PhasePoints:
pt_label = "IC/%sK-%s%s" % (pt[0], pt[1], pt[2])
if not os.path.exists(os.path.join(self.root, self.tgtdir, pt_label, self.lipid_coords)):
raise RuntimeError("Initial condition files don't exist; please provide IC directory")
# Create molecule object for each IC.
all_ic = Molecule(os.path.join(self.root, self.tgtdir, pt_label, self.lipid_coords))
self.lipid_mols[pt] = []
n_uniq_ic = int(self.RefData['n_ic'][pt])
if n_uniq_ic > len(all_ic):
raise RuntimeError("Number of frames in initial conditions .gro file is less than the number of parallel simulations requested in data.csv")
# Index ICs by pressure and temperature in a dictionary.
for ic in range(n_uniq_ic):
self.lipid_mols[pt].append(all_ic[ic])
else:
# Read in lipid starting coordinates.
if not os.path.exists(os.path.join(self.root, self.tgtdir, self.lipid_coords)):
logger.error("%s doesn't exist; please provide lipid_coords option\n" % self.lipid_coords)
raise RuntimeError
self.lipid_mol = Molecule(os.path.join(self.root, self.tgtdir, self.lipid_coords), toppbc=True)
# Extra files to be linked into the temp-directory.
self.nptfiles += [self.lipid_coords]
# Scripts to be copied from the ForceBalance installation directory.
self.scripts += ['npt_lipid.py']
# Prepare the temporary directory.
self.prepare_temp_directory()
# Build keyword dictionary to pass to engine.
if self.do_self_pol:
self.gas_engine_args.update(self.OptionDict)
self.gas_engine_args.update(options)
del self.gas_engine_args['name']
# Create engine object for gas molecule to do the polarization correction.
self.gas_engine = self.engine_(target=self, mol=self.gas_mol, name="selfpol", **self.gas_engine_args)
# Don't read indicate.log when calling meta_indicate()
self.read_indicate = False
self.write_indicate = False
# Don't read objective.p when calling meta_get()
self.read_objective = False
#======================================#
# UNDER DEVELOPMENT #
#======================================#
# Put stuff here that I'm not sure about. :)
np.set_printoptions(precision=4, linewidth=100)
np.seterr(under='ignore')
## Saved force field mvals for all iterations
self.SavedMVal = {}
## Saved trajectories for all iterations and all temperatures
self.SavedTraj = defaultdict(dict)
## Evaluated energies for all trajectories (i.e. all iterations and all temperatures), using all mvals
self.MBarEnergy = defaultdict(lambda:defaultdict(dict))
espval.append(float(s[3]))
elif len(espxyz) > 0:
# After reading in a block of ESPs, don't read any more.
ESPMode = -1
if line.strip().startswith("Geometry (in Angstrom)"):
XMode = 1
EMode = len(elem) == 0
if 'Electrostatic Potential' in line.strip() and ESPMode == 0:
ESPMode = 1
if len(xyzs) == 0:
raise Exception('%s has length zero' % psiout)
return xyzs, elem, espxyz, espval
xyzs, elem, espxyz, espval = read_psi_xyzesp(sys.argv[1])
M = Molecule()
M.xyzs = xyzs
M.elem = elem
M.write('%s.xyz' % os.path.splitext(sys.argv[1])[0])
EM = Molecule()
EM.xyzs = [np.array(espxyz) * 0.52917721092]
EM.elem = ['H' for i in range(len(espxyz))]
EM.write('%s.espx' % os.path.splitext(sys.argv[1])[0], ftype="xyz")
M.qm_espxyzs = EM.xyzs
M.qm_espvals = [np.array(espval)]
M.write("qdata.txt")
np.savetxt('%s.esp' % os.path.splitext(sys.argv[1])[0], espval)
def main():
topfnm = argv[3] if len(argv) >= 4 else None
M = Molecule(argv[1], top=topfnm)
M.write(argv[2])
