" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print(
" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" %
(new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1022)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" % (hex(eth_type), vlan_id,
input_port))
print (" Action: Push VLAN (Ethernet Type=%s)"
% hex(push_eth_type))
print (" Set Field (VLAN ID=%s)" % push_vlan_id)
print (" Output (to Physical Port Number %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name = "Push VLAN")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 22
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1013)
flow_entry.set_flow_cookie(cookie = 407)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
flow_entry.set_flow_hard_timeout(hard_timeout = 3400)
flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
# --- Instruction: 'Apply-actions'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
instruction = Instruction(instruction_order = 0)
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IP DSCP (%s)\n"
" UDP Source Port (%s)\n"
" UDP Destination Port (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst, ip_dscp, udp_src_port,
udp_dst_port))
print(" Action: Output (to %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="demo17.py")
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(flow_priority=1015)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
" IPv4 Destination Address (%s)" %
(match_in_port,
hex(match_ip_eth_type),
match_ipv4_dst))
print (" Action: Set IPv4 ToS (tos %s)\n"
" Output (Port number %s)" %
(mod_nw_tos, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetNwTosAction(action_order)
action.set_tos(mod_nw_tos)
instruction.add_apply_action(action)
action_order += 1
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" % (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)" % (hex(eth_type), ipv6_src, ipv6_dst))
print (" Action: Output (to %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name = "match=ipv6_src,ipv6_dst;actions=output:Controller")
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1014)
flow_entry.set_flow_cookie(cookie = 408)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
flow_entry.set_flow_hard_timeout(hard_timeout = 3400)
flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = output_port)
instruction.add_apply_action(action)
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IPv6 Flow Label (%s)\n"
" IP DSCP (%s)\n"
" TCP Source Port (%s)\n"
" TCP Destination Port (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst, ipv6_flabel,
ip_dscp, tcp_src_port, tcp_dst_port))
print (" Action: Output (to %s)" % (output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="demo19.py")
table_id = 0
flow_id = 25
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1018)
flow_entry.set_flow_cookie(cookie=23)
flow_entry.set_flow_hard_timeout(hard_timeout=1200)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry .add_instruction(instruction)
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)"% (hex(eth_type), in_port, mpls_label))
print (" Action: Pop MPLS (Ethernet Type %s)\n"
" Output (Physical Port number %s)" % (pop_ether_type, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 30
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name = "Strip MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout = 0)
flow_entry.set_flow_idle_timeout(idle_timeout = 0)
flow_entry.set_flow_priority(flow_priority = 1023)
flow_entry.set_flow_cookie(cookie = 889)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
# --- Instruction: 'Apply-actions'
# Actions: 'Pop MPLS Header'
# 'Output'
instruction = Instruction(instruction_order = 0)
action = PopMplsHeaderAction(order = 0)
action.set_eth_type(pop_ether_type)
instruction.add_apply_action(action)
action = OutputAction(order = 1, port = output_port)
instruction.add_apply_action(action)
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print (" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" %
(new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1022)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" IPv4 Destination Address (%s)" %
(hex(eth_type), in_port, ipv4_dst))
print (" Action: Push MPLS Header (Ethernet Type %s)\n"
" Set Field (MPLS label %s)\n"
" Output (Physical Port number %s)" %
(hex(push_ether_type), mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 28
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name="Push MPLS Label")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1021)
flow_entry.set_flow_cookie(cookie=654)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Push MPLS Header'
# 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushMplsHeaderAction(order=0)
action.set_eth_type(push_ether_type)
instruction.add_apply_action(action)
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" Input Port (%s)" %
(hex(eth_type), eth_src, eth_dst, input_port))
print(" Action: Push VLAN (Ethernet Type=%s)" % hex(push_eth_type))
print(" Set Field (VLAN ID=%s)" % push_vlan_id)
print(" Output (to Physical Port Number %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="Push VLAN 100")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 21
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1012)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=1200)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
instruction = Instruction(instruction_order=0)
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst))
print(" Action: Output (to %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(
flow_name="match=ipv6_src,ipv6_dst;actions=output:Controller")
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1014)
flow_entry.set_flow_cookie(cookie=408)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
% (match_in_port,
hex(match_ip_eth_type),
match_ipv4_dst))
print (" Action: Set IPv4 ToS (tos %s)\n"
" Output (Port number %s)"
% (mod_nw_tos,
act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order = 0)
action_order = 0
action = SetNwTosAction(action_order)
action.set_tos(mod_nw_tos)
instruction.add_apply_action(action)
action_order += 1
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst))
print (" Action: Output (to %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
fname = "match=ipv6_src,ipv6_dst;actions=output:Controller"
flow_entry.set_flow_name(flow_name=fname)
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1014)
flow_entry.set_flow_cookie(cookie=408)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print(
" Action: Pop MPLS (Ethernet Type %s)\n"
" Output (Physical Port number %s)" %
(pop_ether_type, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 30
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Strip MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1023)
flow_entry.set_flow_cookie(cookie=889)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Pop MPLS Header'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PopMplsHeaderAction(order=0)
action.set_eth_type(pop_ether_type)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=output_port)
instruction.add_apply_action(action)
" VLAN ID (%s)\n"
" Input Port (%s)" % (hex(arp_eth_type), customer_vlan_id, customer_port))
print (" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" % (hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name = "[MLX1-A] Test flow (match:inport=110,arp;actions:push-QINQ-tag,mod_vlan=100,push-DOT1Q-tag,mod_vlan=998,output:111)")
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout = 600)
flow_entry1.set_flow_idle_timeout(idle_timeout = 300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order = 0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" %
(hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,arp;" + \
"actions:push-QINQ-tag,mod_vlan=100," + \
"push-DOT1Q-tag,mod_vlan=998,output:111)"
flow_entry1.set_flow_name(flow_name=fname)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout=600)
flow_entry1.set_flow_idle_timeout(idle_timeout=300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1