def _pwrlevel_events_handler(self):
"""Handler function for GPU Pwr Level events"""
self._pwrlevel_intervals_by_device = defaultdict(IntervalList)
for device, events in self._pwrlevel_events_by_device.iteritems():
for pwr_a, pwr_b in zip(events, events[1:]):
interval = Interval(pwr_a.timestamp, pwr_b.timestamp)
freq_interval = FreqInterval(device=device,
frequency=pwr_a.data.freq,
pwrlevel=pwr_a.data.pwrlevel,
interval=interval,
)
self._pwrlevel_intervals_by_device[device].append(freq_interval)
# again, we need some closure.
if events:
self._pwrlevel_intervals_by_device[device].append(FreqInterval(
device=device,
frequency=pwr_b.data.freq,
pwrlevel=pwr_b.data.pwrlevel,
interval=Interval(
pwr_b.timestamp,
self._trace.duration
)
)
)
return self._pwrlevel_intervals_by_device
def _buslevel_events_handler(self):
"""Handler function for GPU Bus Level events"""
self._buslevel_intervals_by_device = defaultdict(IntervalList)
for device, events in self._buslevel_events_by_device.iteritems():
for bus_a, bus_b in zip(events, events[1:]):
interval = Interval(bus_a.timestamp, bus_b.timestamp)
bus_interval = BusLevelInterval(device=device,
pwrlevel=bus_a.data.pwrlevel,
bus=bus_a.data.bus,
interval=interval,
)
self._buslevel_intervals_by_device[device].append(bus_interval)
# again, we need some closure.
if events:
self._buslevel_intervals_by_device[device].append(BusLevelInterval(
device=device,
pwrlevel=bus_b.data.pwrlevel,
bus=bus_b.data.bus,
interval=Interval(
bus_b.timestamp,
self._trace.duration
)
)
)
return self._buslevel_intervals_by_device
def _pwrstate_events_handler(self):
"""Handler function for GPU Pwr State events"""
self._pwrstate_intervals_by_device = defaultdict(IntervalList)
for device, events in self._pwrstate_events_by_device.iteritems():
for pwr_a, pwr_b in zip(events, events[1:]):
interval = Interval(pwr_a.timestamp, pwr_b.timestamp)
state = BusyState.map(pwr_a.data.state) or BusyState.UNKNOWN
idle_interval = IdleInterval(device=device,
state=state,
interval=interval,
)
self._pwrstate_intervals_by_device[device].append(idle_interval)
# again, we need some closure.
if events:
state = BusyState.map(pwr_b.data.state) or BusyState.UNKNOWN
self._pwrstate_intervals_by_device[device].append(IdleInterval(
device=device,
state=state,
interval=Interval(
pwr_b.timestamp,
self._trace.duration
)
)
)
return self._pwrstate_intervals_by_device
def _clk_events_handler(self):
"""Handler function for clock enable/disable events"""
self._clk_intervals_by_clock = defaultdict(IntervalList)
for clock, events in self._clk_events_by_clock.iteritems():
last_timestamp = self._trace.interval.start
for clk_event in events:
# Yes, keep inverted as we track when change occurs
state = ClockState.DISABLED if \
clk_event.tracepoint == 'clk_disable' \
else ClockState.ENABLED
interval = Interval(last_timestamp, clk_event.timestamp)
clk_interval = ClkInterval(clock, state, interval)
self._clk_intervals_by_clock[clock].append(clk_interval)
last_timestamp = clk_event.timestamp
# again, we need some closure.
if events:
# not a change, so leave as is.
state = ClockState.ENABLED if \
clk_event.tracepoint == 'clk_enable' \
else ClockState.DISABLED
end_interval = ClkInterval(
clock=clock,
state=state,
interval=Interval(clk_event.timestamp,
self._trace.duration
)
)
self._clk_intervals_by_clock[clock].append(end_interval)
return self._clk_intervals_by_clock
def _cluster_idle_events_handler(self):
"""Handler function for Cluster Idle events"""
self._cluster_idle_intervals_by_cluster = defaultdict(IntervalList)
for cluster, events in self._cluster_idle_events_by_cluster.iteritems(
):
last_event = None
for cluster_idle in events:
tp = cluster_idle.tracepoint
if tp == 'cluster_exit':
interval = Interval(
last_event.timestamp if last_event else
self._trace.interval.start, cluster_idle.timestamp)
idle_interval = IdleInterval(
cluster=cluster,
state=BusyState.IDLE,
idx=cluster_idle.data.idx,
interval=interval,
)
self._cluster_idle_intervals_by_cluster[cluster].append(
idle_interval)
elif tp == 'cluster_enter':
interval = Interval(
last_event.timestamp if last_event else
self._trace.interval.start, cluster_idle.timestamp)
idle_interval = IdleInterval(
cluster=cluster,
state=BusyState.BUSY,
idx=-1,
interval=interval,
)
self._cluster_idle_intervals_by_cluster[cluster].append(
idle_interval)
last_event = cluster_idle
# again, we need some closure.
if last_event:
if last_event.tracepoint == 'cluster_exit':
state = BusyState.BUSY
idx = -1
else:
state = BusyState.IDLE
idx = last_event.data.idx
self._cluster_idle_intervals_by_cluster[cluster].append(
IdleInterval(cluster=cluster,
state=state,
idx=idx,
interval=Interval(last_event.timestamp,
self._trace.duration)))
return self._cluster_idle_intervals_by_cluster
def _switch_device_latency_handler(self):
"""
Returns list of all input events
"""
self._switch_latencies = IntervalList()
deliver_inputs = self._trace.android.event_intervals(
"deliverInputEvent")
def _preview_intervals():
"""
Generator that yields intervals when still images are captured
"""
last_timestamp = self._trace.interval.start
sp_events = self._trace.android.event_intervals(
'doStopPreviewSync')
if not sp_events:
preview_events = self._trace.android.event_intervals(
'AndroidCamera.startPreview')
if preview_events:
camera_task = preview_events[0].event.task
sp_events = (context for context in \
self._trace.android.event_intervals('disconnect') \
if context.event.task.pid == camera_task.pid)
for sp_event in sp_events:
yield Interval(last_timestamp, sp_event.interval.start)
last_timestamp = sp_event.interval.start
for interval in _preview_intervals():
touch_events = deliver_inputs.slice(interval=interval,
trimmed=False)
if touch_events:
start_ts = touch_events[-1].interval.start
end_ts = start_ts
post_touch_interval = Interval(start_ts, self._trace.duration)
si_events = self._trace.android.event_intervals(
name='StartPreviewThread', interval=post_touch_interval)
if not si_events:
si_events = self._trace.android.event_intervals(
name='AndroidCamera.startPreview',
interval=post_touch_interval)
if si_events:
end_ts = si_events[0].interval.end
shutter_lag_interval = Interval(start=start_ts, end=end_ts)
self._switch_latencies.append(
CameraLatency("Camera Switch",
interval=shutter_lag_interval,
latency=shutter_lag_interval.duration))
return self._switch_latencies
def _async_event_handler(self):
"""
TODO: Track by cookie. This is rarely used!!!
"""
last_timestamp = self._trace.interval.start
last_event = None
# Stack them like Jason (JSON) 'PID', then 'cookie'
counter_events_by_cookie = defaultdict(EventList)
counter_events_by_pid = defaultdict(lambda: counter_events_by_cookie)
try:
while True:
event = (yield)
pid, cookie = event.data.pid, event.data.cookie
tag = event.data.atrace_tag
event_list = counter_events_by_pid[pid][cookie]
if tag is AtraceTag.ASYNC_BEGIN:
event_list.append(event)
elif tag is AtraceTag.ASYNC_END and event_list:
last_event = event_list.pop()
last_timestamp = last_event.timestamp
interval = Interval(last_timestamp, event.timestamp)
context = Context(pid=pid,
name=last_event.data.section_name,
interval=interval,
event=last_event)
self._tmw_intervals_by_name[context.name].append(context)
else:
log.warn(
"Missing start marker {event}".format(event=event))
except GeneratorExit:
# close things off
for pid, by_name in counter_events_by_pid.iteritems():
for cookie, event_list in by_name.iteritems():
for event in event_list:
last_timestamp = event.timestamp
interval = Interval(last_timestamp,
self._trace.duration)
context = Context(pid=pid,
name=event.data.section_name,
interval=interval,
event=event)
self._tmw_intervals_by_name[context.name].append(
context)
def _still_capture_intervals():
"""
Generator that yields intervals when still images are captured
"""
last_timestamp = self._trace.interval.start
for tp_event in self._trace.android.event_intervals(
'doTakePictureAsync'):
yield Interval(last_timestamp, tp_event.interval.start)
last_timestamp = tp_event.interval.start
def _start_launch_time(self, launched_event):
"""
Start time estimated as first time we ever saw (i.e. scheduled on CPU)
the launched task.
"""
if launched_event:
interval = Interval(0, launched_event.timestamp)
return self._trace.cpu.task_intervals(
task=launched_event.task, interval=interval)[0].interval.start
def _counter_handler(self):
"""
"""
last_timestamp = self._trace.interval.start
last_value = -1.0
last_event = None
# Stack them like Jason (JSON) 'PID', then 'Counter name'
counter_events_by_name = defaultdict(EventList)
counter_events_by_pid = defaultdict(lambda: counter_events_by_name)
try:
while True:
event = (yield)
pid = event.data.pid
counter_name = event.data.counter_name
event_list = counter_events_by_pid[pid][counter_name]
if event_list:
last_event = event_list.pop()
last_timestamp = last_event.timestamp
last_value = last_event.data.value
event_list.append(event)
interval = Interval(last_timestamp, event.timestamp)
counter = Counter(pid=pid,
name=counter_name,
event=last_event,
value=last_value,
interval=interval)
self._tmw_intervals_by_name[counter.name].append(counter)
except GeneratorExit:
# close things off
for pid, by_name in counter_events_by_pid.iteritems():
for counter_name, event_list in by_name.iteritems():
for event in event_list:
last_timestamp = event.timestamp
last_value = event.data.value
interval = Interval(last_timestamp,
self._trace.duration)
counter = Counter(pid=pid,
name=counter_name,
event=event,
value=last_value,
interval=interval)
self._tmw_intervals_by_name[counter.name].append(
counter)
def _context_handler(self):
"""
"""
last_timestamp = self._trace.interval.start
last_event = None
counter_events_by_pid = defaultdict(EventList)
try:
while True:
event = (yield)
pid = event.task.pid
tag = event.data.atrace_tag
if tag is AtraceTag.CONTEXT_BEGIN:
counter_events_by_pid[pid].append(event)
elif tag is AtraceTag.CONTEXT_END and counter_events_by_pid[
pid]:
last_event = counter_events_by_pid[pid].pop()
last_timestamp = last_event.timestamp
last_pid, last_name = \
last_event.data.pid, last_event.data.section_name
interval = Interval(last_timestamp, event.timestamp)
context = Context(pid=last_pid,
name=last_name,
interval=interval,
event=last_event)
self._tmw_intervals_by_name[last_name].append(context)
else:
log.warn(
"Missing start marker {event}".format(event=event))
except GeneratorExit:
# close things off
for pid, event_list in counter_events_by_pid.iteritems():
for event in event_list:
last_timestamp = event.timestamp
interval = Interval(last_timestamp, self._trace.duration)
if event.data.atrace_tag is not AtraceTag.CONTEXT_END:
pid, name = event.data.pid, event.data.section_name
context = Context(pid=pid,
name=name,
interval=interval,
event=event)
self._tmw_intervals_by_name[name].append(context)
def _freq_events_handler(self):
"""Handler function for clock frequency events"""
self._freq_intervals_by_clock = defaultdict(IntervalList)
for clock, events in self._freq_events_by_clock.iteritems():
last_rate, last_timestamp = -1.0, self._trace.interval.start
for freq_event in events:
interval = Interval(last_timestamp, freq_event.timestamp)
freq_interval = FreqInterval(clock, last_rate, interval)
self._freq_intervals_by_clock[clock].append(freq_interval)
last_rate = freq_event.data.state
last_timestamp = freq_event.timestamp
# again, we need some closure.
end_interval = FreqInterval(clock=clock,
frequency=last_rate,
interval=Interval(
last_timestamp,
self._trace.duration))
self._freq_intervals_by_clock[clock].append(end_interval)
return self._freq_intervals_by_clock
def rendering_intervals(self, interval=None):
"""
"""
frames = self.frame_intervals(interval=interval)
rendering_intervals = IntervalList()
slice_start = frames[0].interval.start
for i, j in zip(frames[:-1], frames[1:]):
if j.interval.start - i.interval.end > 2 * VSYNC:
# new group of frames.
ri = Rendering(interval=Interval(slice_start, i.interval.end))
rendering_intervals.append(ri)
slice_start = j.interval.start
return rendering_intervals
def _shutter_lag_latency_handler(self):
"""
Returns list of all input events
"""
self._shutter_lag_latencies = IntervalList()
deliver_inputs = self._trace.android.event_intervals(
"deliverInputEvent")
def _still_capture_intervals():
"""
Generator that yields intervals when still images are captured
"""
last_timestamp = self._trace.interval.start
for tp_event in self._trace.android.event_intervals(
'doTakePictureAsync'):
yield Interval(last_timestamp, tp_event.interval.start)
last_timestamp = tp_event.interval.start
for interval in _still_capture_intervals():
touch_events = deliver_inputs.slice(interval=interval,
trimmed=False)
# Necessary as we may be interested in different IRQ name
if touch_events:
# Use last input event within this interval
start_ts = touch_events[-1].interval.start
end_ts = start_ts
post_touch_interval = Interval(interval.end,
self._trace.duration)
si_events = self._trace.android.event_intervals(
name='storeImage', interval=post_touch_interval)
if si_events:
end_ts = si_events[0].interval.end
shutter_lag_interval = Interval(start=start_ts, end=end_ts)
self._shutter_lag_latencies.append(
CameraLatency("Shutter Lag",
interval=shutter_lag_interval,
latency=shutter_lag_interval.duration))
return self._shutter_lag_latencies
def _bur_events_handler(self):
"""Handler function for bus update request events"""
self._bur_intervals_by_dev = defaultdict(IntervalList)
for device, events in self._bur_events_by_dev.iteritems():
last_event = None
for bur_event in events:
try:
interval = \
Interval(last_event.timestamp if last_event else self._trace.interval.start, bur_event.timestamp)
except ValueError, e:
raise e
state = \
BusState.BUSY if (bur_event.data.active or \
bur_event.data.ib != 0) else BusState.IDLE
bur_interval = BusRequestInterval(
device=device,
state=state,
master_slave=(bur_event.data.src, bur_event.data.dest),
average_bw_GBps=(bur_event.data.ab / 1e9),
instantaneous_bw_GBps=(bur_event.data.ib / 1e9),
interval=interval,
)
self._bur_intervals_by_dev[device].append(bur_interval)
last_event = bur_event
# again, we need some closure.
if last_event:
state = BusState.BUSY if last_event.data.active else BusState.IDLE
self._bur_intervals_by_dev[device].append(
BusRequestInterval(
device=device,
state=state,
master_slave=(last_event.data.src,
last_event.data.dest),
average_bw_GBps=(last_event.data.ib / 1e9),
instantaneous_bw_GBps=(last_event.data.ib / 1e9),
interval=Interval(last_event.timestamp,
self._trace.duration)))
def _thermal_events_handler(self):
"""Handler function for thermal events"""
self._thermal_intervals_by_tsens = defaultdict(IntervalList)
for tsens, events in self._thermal_events_by_tsens.iteritems():
last_temp, last_timestamp, last_threshold = -1.0, 0.0, False
current_threshold = False
for thermal_event in events:
current_temp, tracepoint = thermal_event.data.temp, \
thermal_event.tracepoint
if tracepoint == 'tsens_threshold_hit':
current_threshold = True
elif tracepoint == 'tsens_threshold_clear':
current_threshold = False
# update when temperature or threshold state changes.
if current_temp != last_temp or \
current_threshold != last_threshold:
interval = Interval(last_timestamp,
thermal_event.timestamp)
thermal_interval = ThermalInterval(tsens, last_temp,
interval,
last_threshold)
self._thermal_intervals_by_tsens[tsens].append(
thermal_interval)
last_temp = current_temp
last_timestamp = thermal_event.timestamp
last_threshold = current_threshold
# again, we need some closure.
end_interval = ThermalInterval(
tsens=tsens,
temp=last_temp,
interval=Interval(last_timestamp, self._trace.duration),
mitigated=last_threshold,
)
self._thermal_intervals_by_tsens[tsens].append(end_interval)
return self._thermal_intervals_by_tsens
def _end_launch_time(self, launched_event, next_launched_event=None):
"""
End time estimated as last `performTraversals`(screen update) that caused
a `setTransactionState`.
setTransactionState() is invoked to inform SurfaceFlinger state of changes
of the surface; changes can be layer_state_t and Display_state
(see native/include/private/gui/LayerState.h).
layer_state_t indicates changes in position/color/depth/size/alpha/crop etc
Display_state indicates changes in orientation, etc
"""
end_time = None
max_end_time = self._start_launch_time(next_launched_event) \
if next_launched_event else self._trace.duration
# after launch
pl_interval = Interval(launched_event.timestamp, max_end_time)
performTraversals = self.event_intervals(name=UI_THREAD_DRAW_NAMES,
task=launched_event.task,
interval=pl_interval,
match_exact=False)
last_end = max_end_time
for pt_event in reversed(performTraversals):
sts_interval = Interval(pt_event.interval.start, last_end)
sts_events = self.event_intervals(name='setTransactionState',
interval=sts_interval)
# ignore 'setTransactionState' due to app close/focus switch
# by checking 'wmUpdateFocus'
wmuf_events = self.event_intervals(name='wmUpdateFocus',
interval=sts_interval)
if sts_events and not wmuf_events and sts_interval.end != max_end_time:
end_time = sts_interval.end
break
last_end = pt_event.interval.start
return end_time
def closure(dict_to_use, dest_dict):
for sector, event_list in dict_to_use.iteritems():
for event in event_list:
last_timestamp = event.timestamp
io_type=event.data.rwbs.io_type
device = (event.data.dev_major, event.data.dev_minor)
interval = Interval(last_timestamp, self._trace.duration)
block_io = IOInterval(io_type=io_type,
task=event.task,
device=device,
sector=sector,
errors=event.data.errors,
numSectors=event.data.nr_sector,
interval=interval,
commands=event.data.rwbs.commands)
dest_dict[io_type].append(block_io)
def _preview_intervals():
"""
Generator that yields intervals when still images are captured
"""
last_timestamp = self._trace.interval.start
sp_events = self._trace.android.event_intervals(
'doStopPreviewSync')
if not sp_events:
preview_events = self._trace.android.event_intervals(
'AndroidCamera.startPreview')
if preview_events:
camera_task = preview_events[0].event.task
sp_events = (context for context in \
self._trace.android.event_intervals('disconnect') \
if context.event.task.pid == camera_task.pid)
for sp_event in sp_events:
yield Interval(last_timestamp, sp_event.interval.start)
last_timestamp = sp_event.interval.start
def app_launch_latencies(self, task=None):
"""Return launch latency seen in trace"""
launch_latencies = []
launched_events = list(self.launched_app_events())
launched_events.append(None)
for curr_app_event, next_app_event in zip(launched_events,
launched_events[1:]):
event = curr_app_event.event
next_event = next_app_event.event if next_app_event else None
if task and event.task != task:
continue
start_time, end_time = \
self._start_launch_time(event), self._end_launch_time(event, next_event)
if (start_time and end_time) is not None:
launch_interval = Interval(start_time, end_time)
launch_latencies.append(
LaunchLatency(task=event.task,
interval=launch_interval,
latency=launch_interval.duration))
return launch_latencies
def _input_intervals():
"""
Generator that yields intervals when discrete input event(s)
are read & decoded by Android `Input Reader`.
x__x__x____IR___ID_ID_ID___DI_SU__DI_SU__DI_SU______
x = multiple input IRQs (multi-touch translated by Android Input Framework)
IR = Input Reader [read/decodes multiple events @ once]
ID = Input Dispatch [dispatches each input event]
DI = Deliver Input [ appropriate window consumes input event ]
SU = SurfaceFlinger Screen Update due to window handling input event
Please note InputReader 'iq' will be set to 1 whenever InputReader
had event to process. This could be disabled in some systems.
"""
last_timestamp = self._trace.interval.start
for ir_event in filter_by_task(all_tasks, 'name', 'InputReader',
'any'):
yield Interval(last_timestamp, ir_event.interval.end)
last_timestamp = ir_event.interval.end
def _block_handler(self):
"""
"""
last_timestamp = self._trace.interval.start
last_event = None
block_issue_events_by_sector = defaultdict(list)
block_insert_events_by_sector = defaultdict(list)
try:
while True:
event = (yield)
tracepoint = event.tracepoint
sector = event.data.sector
if tracepoint == 'block_rq_issue':
block_issue_events_by_sector[sector].append(event)
elif tracepoint == 'block_rq_insert':
block_insert_events_by_sector[sector].append(event)
elif tracepoint == 'block_rq_complete':
# TODO: [CHUK] validate this, currently assuming
# each block i/o request per sector is serially queued.
# This is true for simple trace I have but maynot always hold.
if block_issue_events_by_sector[sector]:
last_event = block_issue_events_by_sector[sector].pop()
last_timestamp = last_event.timestamp
io_type=event.data.rwbs.io_type
device = (event.data.dev_major, event.data.dev_minor)
interval = Interval(last_timestamp, event.timestamp)
block_io = IOInterval(io_type=io_type,
task=last_event.task,
device=device,
sector=sector,
errors=event.data.errors,
numSectors=event.data.nr_sector,
interval=interval,
commands=event.data.rwbs.commands)
self._io_issue_intervals_by_op[io_type].append(block_io)
if block_insert_events_by_sector[sector]:
last_event = block_insert_events_by_sector[sector].pop()
last_timestamp = last_event.timestamp
io_type=event.data.rwbs.io_type
device = (event.data.dev_major, event.data.dev_minor)
interval = Interval(last_timestamp, event.timestamp)
block_io = IOInterval(io_type=io_type,
task=last_event.task,
device=device,
sector=sector,
errors=event.data.errors,
numSectors=event.data.nr_sector,
interval=interval,
commands=event.data.rwbs.commands)
self._io_insert_intervals_by_op[io_type].append(block_io)
else:
log.warn("Missing issue marker {event}".format(event=event))
except GeneratorExit:
# close things off
def closure(dict_to_use, dest_dict):
for sector, event_list in dict_to_use.iteritems():
for event in event_list:
last_timestamp = event.timestamp
io_type=event.data.rwbs.io_type
device = (event.data.dev_major, event.data.dev_minor)
interval = Interval(last_timestamp, self._trace.duration)
block_io = IOInterval(io_type=io_type,
task=event.task,
device=device,
sector=sector,
errors=event.data.errors,
numSectors=event.data.nr_sector,
interval=interval,
commands=event.data.rwbs.commands)
dest_dict[io_type].append(block_io)
closure(block_issue_events_by_sector, self._io_issue_intervals_by_op)
closure(block_insert_events_by_sector, self._io_insert_intervals_by_op)
def _input_latency_handler(self, irq_name):
"""
Returns list of all input events
"""
self._input_latencies = IntervalList()
all_tasks = self._trace.cpu.task_intervals()
all_aq_events = self.input_events()
touch_irqs = IntervalList(
filter_by_task(all_tasks, 'name', irq_name, 'any'))
def _input_intervals():
"""
Generator that yields intervals when discrete input event(s)
are read & decoded by Android `Input Reader`.
x__x__x____IR___ID_ID_ID___DI_SU__DI_SU__DI_SU______
x = multiple input IRQs (multi-touch translated by Android Input Framework)
IR = Input Reader [read/decodes multiple events @ once]
ID = Input Dispatch [dispatches each input event]
DI = Deliver Input [ appropriate window consumes input event ]
SU = SurfaceFlinger Screen Update due to window handling input event
Please note InputReader 'iq' will be set to 1 whenever InputReader
had event to process. This could be disabled in some systems.
"""
last_timestamp = self._trace.interval.start
for ir_event in filter_by_task(all_tasks, 'name', 'InputReader',
'any'):
yield Interval(last_timestamp, ir_event.interval.end)
last_timestamp = ir_event.interval.end
for interval in _input_intervals():
irqs = touch_irqs.slice(interval=interval, trimmed=False)
# Necessary as we may be interested in different IRQ name
if irqs:
# Use longest IRQ
start_ts = max(
irqs, key=lambda x: x.interval.duration).interval.start
end_ts = start_ts
post_ir_interval = Interval(start_ts, self._trace.duration)
di_events = self.event_intervals(
name=['deliverInputEvent', 'input'],
interval=post_ir_interval)
if di_events:
# IMPORTANT: If InputDispatcher sythesizes multiple
# events to same application, we ignore consequent event
# and only parse 1st event. This is because we heuristically
# can't determine start of next input event to differentiate.
di_event = di_events[0]
# necessary in case a synthetic events is cancelled
# canceled appropriately when the events are no longer
# being resynthesized (because the application or IME is
# already handling them or dropping them entirely)
# This is done by checking for dumping input latencies when
# active input event queue length (aq) is > 1 for same task.
# For more details, see
# https://android.googlesource.com/platform/frameworks/base.git/+
# /f9e989d5f09e72f5c9a59d713521f37d3fdd93dd%5E!/
# This returns first interval when aq has pending event(s)
di_event_name = getattr(di_event, 'name', None)
if di_event_name and di_event_name == 'input':
pfb_events = self.event_intervals(
name='doComposition', interval=post_ir_interval)
else:
aq_event = filter_by_task(
all_aq_events.slice(interval=post_ir_interval),
'pid', di_event.event.task.pid)
if aq_event and aq_event.value > 0:
post_di_start = aq_event.interval.start
else:
if aq_event:
continue # if AQ event exists.
post_di_start = di_events[0].interval.start
post_di_interval = Interval(post_di_start,
self._trace.duration)
pfb_events = self.event_intervals(
name='doComposition', interval=post_di_interval)
if pfb_events:
end_ts = pfb_events[0].interval.end
if start_ts != end_ts and end_ts > start_ts and start_ts not in self._input_latencies._start_timestamps:
input_interval = Interval(start=start_ts, end=end_ts)
self._input_latencies.append(
InputLatency(interval=input_interval,
latency=input_interval.duration))
return self._input_latencies
