class FileMergeDialog(wx.Dialog):
def __init__(self, parent, title=DEFAULT_TITLE):
wx.Dialog.__init__(self, parent, wx.ID_ANY, title)
self.Bind(wx.EVT_CLOSE, self.onClose)
self.modified = False
self.title = title
self.parent = parent
self.settings = self.parent.settings
self.images = self.parent.images
self.gCode = []
hsizer=wx.BoxSizer(wx.HORIZONTAL)
hsizer.AddSpacer(10)
vsizer = wx.BoxSizer(wx.VERTICAL)
vsizer.AddSpacer(10)
self.gcl = GCodeList(self)
vsizer.Add(self.gcl)
vsizer.AddSpacer(20)
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
self.bAdd = wx.BitmapButton(self, wx.ID_ANY, self.images.pngAdd, size=BTNDIM)
self.bAdd.SetToolTip("Add a file to the merge")
btnSizer.Add(self.bAdd)
self.Bind(wx.EVT_BUTTON, self.bAddPressed, self.bAdd)
btnSizer.AddSpacer(10)
self.bSave = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFilesaveas, size=BTNDIM)
self.bSave.SetToolTip("Save files merged thus far")
btnSizer.Add(self.bSave)
self.Bind(wx.EVT_BUTTON, self.bSavePressed, self.bSave)
self.bSave.Enable(False)
btnSizer.AddSpacer(10)
self.bView = wx.BitmapButton(self, wx.ID_ANY, self.images.pngView, size=BTNDIM)
self.bView.SetToolTip("View the merged data")
btnSizer.Add(self.bView)
self.Bind(wx.EVT_BUTTON, self.bViewPressed, self.bView)
self.bView.Enable(False)
btnSizer.AddSpacer(60)
self.bOK = wx.BitmapButton(self, wx.ID_ANY, self.images.pngExit, size=BTNDIM)
btnSizer.Add(self.bOK)
self.Bind(wx.EVT_BUTTON, self.bOKPressed, self.bOK)
vsizer.Add(btnSizer, 1, wx.ALIGN_CENTER_HORIZONTAL)
vsizer.AddSpacer(20)
hsizer.Add(vsizer)
hsizer.AddSpacer(10)
self.SetSizer(hsizer)
self.Layout()
self.Fit();
def setTitle(self):
t = self.title
if self.modified:
t += " *"
self.SetTitle(t)
def setModified(self, flag=True):
self.modified = flag
self.bSave.Enable(flag)
self.setTitle()
def bOKPressed(self, _):
self.cancelMerge()
def onClose(self, _):
self.cancelMerge()
def cancelMerge(self):
if self.modified:
dlg = wx.MessageDialog(self, 'Merged G Code not saved',
'Proceed?',
wx.YES_NO | wx.ICON_WARNING)
rc = dlg.ShowModal()
dlg.Destroy()
if rc == wx.ID_NO:
return
self.EndModal(wx.ID_CANCEL)
def bAddPressed(self, _):
dlg = AddToMergeDialog(self)
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
self.gCode.extend(dlg.getGCode())
dlg.Destroy()
self.gcl.updateList(self.gCode)
self.setModified()
self.bView.Enable(True)
def bViewPressed(self, _):
self.gcl.visualize("Merged files")
def bSavePressed(self, _):
if self.gcl.save(self.settings):
self.setModified(False)
def __init__(self, parent, title=DEFAULT_TITLE):
wx.Dialog.__init__(self, parent, wx.ID_ANY, title)
self.Bind(wx.EVT_CLOSE, self.onClose)
self.modified = False
self.title = title
self.parent = parent
self.settings = self.parent.settings
self.images = self.parent.images
self.gCode = []
hsizer=wx.BoxSizer(wx.HORIZONTAL)
hsizer.AddSpacer(10)
vsizer = wx.BoxSizer(wx.VERTICAL)
vsizer.AddSpacer(10)
self.gcl = GCodeList(self)
vsizer.Add(self.gcl)
vsizer.AddSpacer(20)
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
self.bAdd = wx.BitmapButton(self, wx.ID_ANY, self.images.pngAdd, size=BTNDIM)
self.bAdd.SetToolTip("Add a file to the merge")
btnSizer.Add(self.bAdd)
self.Bind(wx.EVT_BUTTON, self.bAddPressed, self.bAdd)
btnSizer.AddSpacer(10)
self.bSave = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFilesaveas, size=BTNDIM)
self.bSave.SetToolTip("Save files merged thus far")
btnSizer.Add(self.bSave)
self.Bind(wx.EVT_BUTTON, self.bSavePressed, self.bSave)
self.bSave.Enable(False)
btnSizer.AddSpacer(10)
self.bView = wx.BitmapButton(self, wx.ID_ANY, self.images.pngView, size=BTNDIM)
self.bView.SetToolTip("View the merged data")
btnSizer.Add(self.bView)
self.Bind(wx.EVT_BUTTON, self.bViewPressed, self.bView)
self.bView.Enable(False)
btnSizer.AddSpacer(60)
self.bOK = wx.BitmapButton(self, wx.ID_ANY, self.images.pngExit, size=BTNDIM)
btnSizer.Add(self.bOK)
self.Bind(wx.EVT_BUTTON, self.bOKPressed, self.bOK)
vsizer.Add(btnSizer, 1, wx.ALIGN_CENTER_HORIZONTAL)
vsizer.AddSpacer(20)
hsizer.Add(vsizer)
hsizer.AddSpacer(10)
self.SetSizer(hsizer)
self.Layout()
self.Fit();
class CirclePanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:circle")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Circle %d" % CirclePanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
CirclePanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Circle Diameter")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDiam = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teDiam, "circlediameter")
sizer.Add(self.teDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "centerx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Center Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "centery")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "centerz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G2/3)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getToolMovement(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
self.cbPocket = wx.CheckBox(self, wx.ID_ANY, "Pocket")
self.addWidget(self.cbPocket, "pocket")
sizer.Add(self.cbPocket,
pos=(ln, 0),
span=(1, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbPocket)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getToolMovement(self):
labels = ["On Circle", "Outside Circle", "Inside Circle"]
self.rbToolMove = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbToolMove.append(r)
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbCutDir.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Center X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Center Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Center Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG23 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
diam = float(self.teDiam.GetValue())
except:
errs.append("Diameter")
try:
depth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
stepover = float(self.teStepOver.GetValue())
except:
errs.append("Stepover")
if not ValidateNoEntryErrors(self, errs):
return
if not ValidateToolSize(self, tdiam, diam, "Circle Diameter"):
return
if not ValidateRange(self, stepover, 0.001, 1.0, "Stepover",
"0 < x <= 1.0"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, safez)
self.tDiam = tdiam
if self.settings.annotate:
self.gcode.append(
"(Circle center (%6.2f,%6.2f) radius %6.2f depth from %6.2f to %6.2f"
% (sx, sy, diam / 2, sz, depth))
tm = self.getChosen(self.rbToolMove)
if tm == "Inside Circle":
diam -= tdiam
elif tm == "Outside Circle":
diam += tdiam
cd = self.getChosen(self.rbCutDir)
if cd == "Clockwise":
cmd = "G2"
else:
cmd = "G3"
passes = int(math.ceil(depth / passdepth))
pkt = self.cbPocket.IsChecked()
if self.settings.annotate:
self.gcode.append("(Cutting direction: %s)" % cd)
self.gcode.append("(Tool movement: %s)" % tm)
self.gcode.append("(Pocket: %s)" % pkt)
if not pkt:
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (sx, sy - diam / 2))
cz = sz
for i in range(passes):
cz -= passdepth
if cz < -depth:
cz = -depth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
if pkt:
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (sx, sy))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
r = tdiam * stepover
while r < diam / 2:
self.gcode.append(
("G1 Y" + self.fmt +
self.speedTerm(addspeed, feedxyG23)) % (sy - r))
self.gcode.append(
(cmd + " J" + self.fmt + " X" + self.fmt + " Y" +
self.fmt + self.speedTerm(addspeed, feedxyG23)) %
(r, sx, sy - r))
r += tdiam * stepover
self.gcode.append(
("G1 Y" + self.fmt + self.speedTerm(addspeed, feedxyG23)) %
(sy - diam / 2))
else:
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
self.gcode.append(
(cmd + " J" + self.fmt + " X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG23)) %
(diam / 2, sx, sy - diam / 2))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) % (safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable(True)
self.bVisualize.Enable()
self.setState(False, True)
class RectanglePanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:rectangle")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Rectangle %d" % RectanglePanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
RectanglePanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Height")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teHeight = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teHeight, "height")
sizer.Add(self.teHeight, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Width")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teWidth = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teWidth, "width")
sizer.Add(self.teWidth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Rotation Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Starting Point")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getStartingPoints(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getToolMovement(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Pocket")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getPockets(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver,
pos=(ln, 3),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getStartingPoints(self):
labels = [
"Lower Left", "Upper Left", "Lower Right", "Upper Right", "Center"
]
self.rbStartPoints = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbStartPoints.append(r)
return sz
def getToolMovement(self):
labels = ["On Rectangle", "Outside Rectangle", "Inside Rectangle"]
self.rbToolMove = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbToolMove.append(r)
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbCutDir.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def getPockets(self):
labels = ["None", "Horizontal", "Vertical", "Centered"]
self.rbPkts = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbPkts.append(r)
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
height = float(self.teHeight.GetValue())
except:
errs.append("Height")
try:
width = float(self.teWidth.GetValue())
except:
errs.append("Width")
try:
depth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
stepover = float(self.teStepOver.GetValue())
except:
errs.append("Stepover")
try:
angle = float(self.teAngle.GetValue())
except:
errs.append("Angle")
if not ValidateNoEntryErrors(self, errs):
return
rot = Rotator(angle)
if not ValidateToolSize(self, tdiam, height, "Height"):
return
if not ValidateToolSize(self, tdiam, width, "Width"):
return
if not ValidateRange(self, stepover, 0.001, 1.0, "Stepover",
"0 < x <= 1.0"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, safez)
self.tDiam = tdiam
if self.settings.annotate:
if angle == 0:
self.gcode.append(
"(Rectangle (%6.2f,%6.2f) to (%6.2f,%6.2f) depth from %6.2f to %6.2f)"
% (sx, sy, width, height, sz, depth))
else:
rx1, ry1 = rot.rotate(sx, sy)
rx2, ry2 = rot.rotate(width + sx, height + sy)
self.gcode.append(
"(Rectangle (%6.2f,%6.2f) to (%6.2f,%6.2f) depth from %6.2f to %6.2f rotated %6.2f)"
% (rx1, ry1, rx2, ry2, sz, depth, angle))
points = [[sx, sy], [sx, sy + height], [sx + width, sy + height],
[sx + width, sy], [sx, sy]]
sp = self.getChosen(self.rbStartPoints)
adjx = 0
adjy = 0
if sp == "Upper Left":
adjy = -height
elif sp == "Upper Right":
adjy = -height
adjx = -width
elif sp == "Lower Right":
adjx = -width
elif sp == "Center":
adjx = -width / 2
adjy = -height / 2
for p in points:
p[0] += adjx
p[1] += adjy
tm = self.getChosen(self.rbToolMove)
rad = float(tdiam) / 2.0
if tm == "Inside Rectangle":
points[0][0] += rad
points[0][1] += rad
points[1][0] += rad
points[1][1] -= rad
points[2][0] -= rad
points[2][1] -= rad
points[3][0] -= rad
points[3][1] += rad
points[4][0] += rad
points[4][1] += rad
elif tm == "Outside Rectangle":
points[0][0] -= rad
points[0][1] -= rad
points[1][0] -= rad
points[1][1] += rad
points[2][0] += rad
points[2][1] += rad
points[3][0] += rad
points[3][1] -= rad
points[4][0] -= rad
points[4][1] -= rad
cd = self.getChosen(self.rbCutDir)
if cd != "Clockwise":
np = points[::-1]
points = np
pkt = self.getChosen(self.rbPkts)
if self.settings.annotate:
self.gcode.append("(Start point: %s)" % sp)
self.gcode.append("(Cutting direction: %s)" % cd)
self.gcode.append("(Tool movement: %s)" % tm)
self.gcode.append("(Pocket: %s)" % pkt)
if pkt == "None":
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
rot.rotate(points[0][0], points[0][1]))
xmin = min(points[0][0], points[2][0]) + tdiam / 2
xmax = max(points[0][0], points[2][0]) - tdiam / 2
ymin = min(points[0][1], points[2][1]) + tdiam / 2
ymax = max(points[0][1], points[2][1]) - tdiam / 2
passes = int(math.ceil(depth / passdepth))
cz = sz
xlast = 0
ylast = 0
for i in range(passes):
cz -= passdepth
if cz < -depth:
cz = -depth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
if pkt == "Horizontal":
first = True
alt = True
y = ymin
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
rot.rotate(xmin, ymin))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
while y <= ymax:
if not first:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xlast, y))
if alt:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xmax, y))
xlast = xmax
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xmin, y))
xlast = xmin
y += tdiam * stepover
first = False
alt = not alt
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
rot.rotate(points[0][0], points[0][1]))
elif pkt == "Vertical":
first = True
alt = True
x = xmin
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
rot.rotate(xmin, ymin))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
while x <= xmax:
if not first:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(x, ylast))
if alt:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(x, ymax))
ylast = ymax
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(x, ymin))
ylast = ymin
x += tdiam * stepover
first = False
alt = not alt
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
rot.rotate(points[0][0], points[0][1]))
elif pkt == "Centered":
vertical = False
if (xmax - xmin) > (ymax - ymin):
ya = (ymax + ymin) / 2.0
yb = ya
d = ymax - ya
xa = xmin + d
xb = xmax - d
elif (xmax - xmin) < (ymax - ymin):
vertical = True
xa = (xmax + xmin) / 2.0
xb = xa
d = xmax - xa
ya = ymin + d
yb = ymax - d
else:
xa = (xmax + xmin) / 2.0
xb = xa
ya = (ymax + ymin) / 2.0
yb = ya
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % rot.rotate(xb, yb))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) % rot.rotate(xa, ya))
d = stepover * tdiam
while (xa - d) >= xmin:
if cd == "Clockwise":
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, ya - d))
if vertical:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, yb + d))
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, ya + d))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xb + d, yb + d))
if vertical:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xb + d, ya - d))
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xb + d, yb - d))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, ya - d))
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, ya - d))
if vertical:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xb + d, ya - d))
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xb + d, yb - d))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xb + d, yb + d))
if vertical:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, yb + d))
else:
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, ya + d))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(xa - d, ya - d))
d += stepover * tdiam
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
rot.rotate(points[0][0], points[0][1]))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) % (cz))
for p in points[1:]:
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
rot.rotate(p[0], p[1]))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) % (safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
class SlotPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:slot")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Rounded Slot %d" % SlotPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
SlotPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Length")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teLength = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teLength, "length")
sizer.Add(self.teLength, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Width")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teWidth = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teWidth, "width")
sizer.Add(self.teWidth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Rotation Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Starting Point")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getStartingPoints(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getToolMovement(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
self.cbPocket = wx.CheckBox(self, wx.ID_ANY, "Pocket")
self.addWidget(self.cbPocket, "pocket")
sizer.Add(self.cbPocket,
pos=(ln, 0),
span=(1, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbPocket)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver,
pos=(ln, 3),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getStartingPoints(self):
labels = [
"Lower Left", "Upper Left", "Lower Right", "Upper Right", "Center"
]
self.rbStartPoints = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbStartPoints.append(r)
return sz
def getToolMovement(self):
labels = ["On Perimeter", "Outside", "Inside"]
self.rbToolMove = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbToolMove.append(r)
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbCutDir.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
self.safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
self.addspeed = self.cbAddSpeed.IsChecked()
try:
self.feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
self.feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
self.feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
self.feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
length = float(self.teLength.GetValue())
except:
errs.append("Length")
try:
width = float(self.teWidth.GetValue())
except:
errs.append("Width")
try:
self.depth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
self.passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
stepover = float(self.teStepOver.GetValue())
except:
errs.append("Stepover")
try:
angle = float(self.teAngle.GetValue())
except:
errs.append("Angle")
if not ValidateNoEntryErrors(self, errs):
return
if not ValidateToolSize(self, tdiam, length, "Length"):
return
if not ValidateToolSize(self, tdiam, width, "Width"):
return
if not ValidateRange(self, stepover, 0.001, 1.0, "Stepover",
"0 < x <= 1.0"):
return
if not ValidateMinLength(self, length, width, "Length", "Width"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, self.safez)
self.tDiam = tdiam
if self.settings.annotate:
self.gcode.append(
"(Rounded slot start (%6.2f,%6.2f) length %6.2f width %6.2f depth from %6.2f to %6.2f)"
% (sx, sy, width, length, sz, self.depth))
length -= width
points = [[sx, sy], [sx, sy + width], [sx + length, sy + width],
[sx + length, sy]]
centers = [[sx, sy + width / 2], [sx + length, sy + width / 2]]
sp = self.getChosen(self.rbStartPoints)
adjx = 0
adjy = 0
if sp == "Upper Left":
adjy = -width
elif sp == "Upper Right":
adjy = -width
adjx = -length
elif sp == "Lower Right":
adjx = -length
elif sp == "Center":
adjx = -length / 2
adjy = -width / 2
for p in points:
p[0] += adjx
p[1] += adjy
for c in centers:
c[0] += adjx
c[1] += adjy
tm = self.getChosen(self.rbToolMove)
rad = float(tdiam) / 2.0
if tm == "Inside":
points[0][1] += rad
points[1][1] -= rad
points[2][1] -= rad
points[3][1] += rad
elif tm == "Outside":
points[0][1] -= rad
points[1][1] += rad
points[2][1] += rad
points[3][1] -= rad
np = []
nc = []
cosv = math.cos(math.radians(angle))
sinv = math.sin(math.radians(angle))
for p in points:
np.append([p[0] * cosv - p[1] * sinv, p[0] * sinv + p[1] * cosv])
for c in centers:
nc.append([c[0] * cosv - c[1] * sinv, c[0] * sinv + c[1] * cosv])
cd = self.getChosen(self.rbCutDir)
clockwise = True
if cd != "Clockwise":
clockwise = False
pkt = self.cbPocket.IsChecked()
if self.settings.annotate:
self.gcode.append("(Start point: %s)" % sp)
self.gcode.append("(Cutting direction: %s)" % cd)
self.gcode.append("(Tool movement: %s)" % tm)
self.gcode.append("(Pocket: %s)" % pkt)
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(self.addspeed, self.feedzG0)) %
(self.safez))
passes = int(math.ceil(self.depth / self.passdepth))
cz = sz
for i in range(passes):
cz -= self.passdepth
if cz < -self.depth:
cz = -self.depth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
if pkt:
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG0)) %
(nc[1][0], nc[1][1]))
self.gcode.append(
("G1 Z" + self.fmt +
self.speedTerm(self.addspeed, self.feedzG1)) % (cz))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(nc[0][0], nc[0][1]))
d = centers[0][1] - points[0][1]
cd = stepover * tdiam
while cd < d:
pc = [p for p in centers]
pp = [[pc[0][0], pc[0][1] - cd], [pc[0][0], pc[0][1] + cd],
[pc[1][0], pc[1][1] + cd], [pc[1][0], pc[1][1] - cd]]
npp = []
npc = []
for p in pp:
npp.append([
p[0] * cosv - p[1] * sinv,
p[0] * sinv + p[1] * cosv
])
for c in pc:
npc.append([
c[0] * cosv - c[1] * sinv,
c[0] * sinv + c[1] * cosv
])
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(npp[0][0], npp[0][1]))
self.loop(npp, npc, clockwise)
cd += stepover * tdiam
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(np[0][0], np[0][1]))
else:
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG0)) %
(np[0][0], np[0][1]))
self.gcode.append(
("G1 Z" + self.fmt +
self.speedTerm(self.addspeed, self.feedzG1)) % (cz))
self.loop(np, nc, clockwise)
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(self.addspeed, self.feedzG0)) %
(self.safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
def loop(self, points, centers, clockwise):
cmd = "G3"
if clockwise:
cmd = "G2"
if clockwise:
self.gcode.append(
(cmd + " I" + self.fmt + " J" + self.fmt + " X" + self.fmt +
" Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(centers[0][0] - points[0][0], centers[0][1] - points[0][1],
points[1][0], points[1][1]))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(points[2][0], points[2][1]))
self.gcode.append(
(cmd + " I" + self.fmt + " J" + self.fmt + " X" + self.fmt +
" Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(centers[1][0] - points[2][0], centers[1][1] - points[2][1],
points[3][0], points[3][1]))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(points[0][0], points[0][1]))
else:
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(points[3][0], points[3][1]))
self.gcode.append(
(cmd + " I" + self.fmt + " J" + self.fmt + " X" + self.fmt +
" Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(centers[1][0] - points[3][0], centers[1][1] - points[3][1],
points[2][0], points[2][1]))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(points[1][0], points[1][1]))
self.gcode.append(
(cmd + " I" + self.fmt + " J" + self.fmt + " X" + self.fmt +
" Y" + self.fmt +
self.speedTerm(self.addspeed, self.feedxyG1)) %
(centers[0][0] - points[1][0], centers[0][1] - points[1][1],
points[0][0], points[0][1]))
class LinDrillPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "drill:linear")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Linear Drill Pattern %d" % LinDrillPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
LinDrillPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safex")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "45", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Number of Holes")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teNHoles = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teNHoles, "numberholes")
sizer.Add(self.teNHoles, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Hole Spacing")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSpacing = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teSpacing, "spacing")
sizer.Add(self.teSpacing, pos=(ln, 1), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Hole Diameter")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teHoleDiam = wx.TextCtrl(self, wx.ID_ANY, "3", style=wx.TE_RIGHT)
self.addWidget(self.teHoleDiam, "holediameter")
sizer.Add(self.teHoleDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Step Over")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepover = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepover, "stepover")
sizer.Add(self.teStepover, pos=(ln, 1), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
self.cbRetract = wx.CheckBox(self, wx.ID_ANY, "Retract each pass")
self.addWidget(self.cbRetract, "retract")
sizer.Add(self.cbRetract,
pos=(ln, 2),
span=(1, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbRetract)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals,
pos=(ln, 1),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
sz.Add(r)
self.addWidget(r, labels[i])
self.rbCutDir.append(r)
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG23 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
totaldepth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
hdiam = float(self.teHoleDiam.GetValue())
except:
errs.append("Hole Diameter")
try:
spacing = float(self.teSpacing.GetValue())
except:
errs.append("Spacing")
try:
nholes = int(self.teNHoles.GetValue())
except:
errs.append("Number of Holes")
try:
angle = float(self.teAngle.GetValue())
except:
errs.append("Angle")
try:
stepover = float(self.teStepover.GetValue())
except:
errs.append("Stepover")
if not ValidateNoEntryErrors(self, errs):
return
if not ValidateToolSize(self, tdiam, hdiam, "Hole Diameter"):
return
if not ValidateMinLength(self, spacing, hdiam, "Hole Spacing",
"Hole Diameter"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, safez)
retract = self.cbRetract.IsChecked()
cd = self.getChosen(self.rbCutDir)
if cd == "Clockwise":
cmd = "G2"
else:
cmd = "G3"
dy = spacing * math.sin(math.radians(angle))
dx = spacing * math.cos(math.radians(angle))
if self.settings.annotate:
self.gcode.append(
"(Linear drill pattern start (%6.2f,%6.2f) Number of holes %d depth from %6.2f to %6.2f)"
% (sx, sy, nholes, sz, totaldepth))
self.gcode.append("(Cut Direction: %s)" % cd)
self.gcode.append("(Spacing: %6.2f)" % spacing)
self.gcode.append("(Angle: %6.2f)" % angle)
self.gcode.append("(Retract each pass: %s)" % str(retract))
self.gcode.append("(Hole diameter: %6.2f)" % hdiam)
self.gcode.append("(Calculated step x/y: %6.2f/%6.2f)" % (dx, dy))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) % (safez))
passes = int(math.ceil(totaldepth / passdepth))
for ix in range(nholes):
cx = sx + ix * dx
cy = sy + ix * dy
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (cx, cy))
cz = sz
for i in range(passes):
cz -= passdepth
if cz < -totaldepth:
cz = -totaldepth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
if hdiam > tdiam:
maxyoff = (hdiam - tdiam) / 2.0
yoff = stepover
while True:
if yoff > maxyoff:
yoff = maxyoff
self.gcode.append(
("G1 Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (cy - yoff))
self.gcode.append(
(cmd + " J" + self.fmt + " X" + self.fmt + " Y" +
self.fmt + self.speedTerm(addspeed, feedxyG23)) %
(yoff, cx, cy - yoff))
if yoff >= maxyoff:
break
yoff += stepover
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG23)) % (cx, cy))
if retract:
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0))
% (safez))
if not retract:
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
class PolyPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:polygon")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Regular Polygon %d" % PolyPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
PolyPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Side length")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSLength = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teSLength, "sidelength")
sizer.Add(self.teSLength, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Number of Sides")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSides = wx.TextCtrl(self, wx.ID_ANY, "6", style=wx.TE_RIGHT)
self.addWidget(self.teSides, "numbersides")
sizer.Add(self.teSides, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Rotation Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "centerx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Center Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "centery")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "centerz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getToolMovement(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
self.cbPocket = wx.CheckBox(self, wx.ID_ANY, "Pocket")
self.addWidget(self.cbPocket, "pocket")
sizer.Add(self.cbPocket,
pos=(ln, 0),
span=(1, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbPocket)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver,
pos=(ln, 3),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getToolMovement(self):
labels = ["On Polygon", "Outside Polygon", "Inside Polygon"]
self.rbToolMove = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbToolMove.append(r)
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbCutDir.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Center X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Center Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Center Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
length = float(self.teSLength.GetValue())
except:
errs.append("Side Length")
try:
angle = float(self.teAngle.GetValue())
except:
errs.append("Angle")
try:
depth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
stepover = float(self.teStepOver.GetValue())
except:
errs.append("Stepover")
try:
sides = int(self.teSides.GetValue())
except:
errs.append("Number of Sides")
if not ValidateNoEntryErrors(self, errs):
return
if not ValidateRange(self, stepover, 0.001, 1.0, "Stepover",
"0 < x <= 1.0"):
return
if not ValidateMinLength(self, sides, 3, "Mumber of Sides", "3"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, safez)
self.tDiam = tdiam
if self.settings.annotate:
self.gcode.append(
"(Regular Polygon center at (%6.2f,%6.2f) depth from %6.2f to %6.2f"
% (sx, sy, sz, depth))
step = 360.0 / sides
a = 0
angles = []
while a < 360:
angles.append(a + angle)
a += step
angles = angles[:
sides] #make sure we didn't get an extra one because of rounding
angles.append(angles[0])
cd = self.getChosen(self.rbCutDir)
if cd == "Clockwise":
na = angles[::-1]
angles = na
pkt = self.cbPocket.IsChecked()
tm = self.getChosen(self.rbToolMove)
if tm == "Inside Polygon":
length -= tdiam / 2.0
elif tm == "Outside Polygon":
length += tdiam / 2.0
passes = int(math.ceil(depth / passdepth))
if self.settings.annotate:
self.gcode.append("(Cutting direction: %s)" % cd)
self.gcode.append("(Tool movement: %s)" % tm)
self.gcode.append("(Pocket: %s)" % pkt)
cz = sz
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) % (safez))
if not pkt:
x = length * math.cos(math.radians(angles[0]))
y = length * math.sin(math.radians(angles[0]))
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (x + sx, y + sy))
for i in range(passes):
cz -= passdepth
if cz < -depth:
cz = -depth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
if pkt:
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (sx, sy))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
l = tdiam * stepover
while l < length:
self.gcode.append("(pocket pass at radius %f)" % l)
for a in angles:
x = l * math.cos(math.radians(a))
y = l * math.sin(math.radians(a))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(x + sx, y + sy))
l += tdiam * stepover
self.gcode.append("(final pass)")
for a in angles:
x = length * math.cos(math.radians(a))
y = length * math.sin(math.radians(a))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(x + sx, y + sy))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
else:
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(cz))
self.gcode.append("(contour only)")
for a in angles[1:]:
x = length * math.cos(math.radians(a))
y = length * math.sin(math.radians(a))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(x + sx, y + sy))
if not pkt:
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
class GridPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "carve:hatch")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Cross Hatch Pattern %d" % GridPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
GridPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Total X Size")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSizeX = wx.TextCtrl(self, wx.ID_ANY, "100", style=wx.TE_RIGHT)
self.addWidget(self.teSizeX, "sizex")
sizer.Add(self.teSizeX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Total Y Size")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSizeY = wx.TextCtrl(self, wx.ID_ANY, "100", style=wx.TE_RIGHT)
self.addWidget(self.teSizeY, "sizey")
sizer.Add(self.teSizeY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Perpendicular Gap")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teGap = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teGap, "gap")
sizer.Add(self.teGap, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiam")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "45", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Y Offset")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teYOffset = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teYOffset, "yoffset")
sizer.Add(self.teYOffset, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Starting Point")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getStartingPoints(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Add Border")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.cbBorder = wx.CheckBox(self, wx.ID_ANY)
self.addWidget(self.cbBorder, "border")
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbBorder)
sizer.Add(self.cbBorder,
pos=(ln, 1),
flag=wx.LEFT + wx.RIGHT + wx.ALIGN_CENTER_VERTICAL,
border=10)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getStartingPoints(self):
labels = [
"Lower Left", "Upper Left", "Lower Right", "Upper Right", "Center"
]
self.rbStartPoints = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbStartPoints.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
sz.Add(r)
self.addWidget(r, labels[i])
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
totalx = float(self.teSizeX.GetValue())
except:
errs.append("Size X")
try:
totaly = float(self.teSizeY.GetValue())
except:
errs.append("Size Y")
try:
totaldepth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
angle = float(self.teAngle.GetValue())
except:
errs.append("Angle")
try:
gap = float(self.teGap.GetValue())
except:
errs.append("Perpendicular Gap")
try:
yoffset = float(self.teYOffset.GetValue())
except:
errs.append("Y Offset")
try:
self.tDiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
if not ValidateNoEntryErrors(self, errs):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), self.tDiam,
self.toolInfo, safez)
border = self.cbBorder.IsChecked()
addspeed = self.cbAddSpeed.IsChecked()
plist = hatch(angle, sx, sy, sx + totalx, sy + totaly, gap, yoffset)
sp = self.getChosen(self.rbStartPoints)
adjx = 0
adjy = 0
if sp == "Upper Left":
adjy = -totaly
elif sp == "Upper Right":
adjy = -totaly
adjx = -totalx
elif sp == "Lower Right":
adjx = -totalx
elif sp == "Center":
adjx = -totalx / 2
adjy = -totaly / 2
points = [[[p[0][0] + adjx, p[0][1] + adjy],
[p[1][0] + adjx, p[1][1] + adjy]] for p in plist]
corners = [[sx + adjx, sy + adjy], [sx + adjx, sy + totaly + adjy],
[sx + totalx + adjx, sy + totaly + adjy],
[sx + totalx + adjx, sy + adjy]]
passes = int(math.ceil(float(totaldepth) / float(passdepth)))
if self.settings.annotate:
self.gcode.append(
"(Cross Hatch pattern start (%6.2f,%6.2f) width %6.2f height %6.2f depth from %6.2f to %6.2f)"
% (sx, sy, totalx, totaly, sz, totaldepth))
self.gcode.append("(Start point: %s)" % sp)
self.gcode.append("(Y offset: %6.2f)" % yoffset)
self.gcode.append("(Cut border: %s)" % str(border))
self.gcode.append("(Gap: %6.2f)" % gap)
self.gcode.append("(Angle: %6.2f)" % angle)
depth = 0
flag = True
for i in range(passes):
depth += passdepth
if depth > totaldepth: depth = totaldepth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, depth))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
safez)
for p in points:
if flag:
xa = p[0][0]
ya = p[0][1]
xb = p[1][0]
yb = p[1][1]
else:
xa = p[1][0]
ya = p[1][1]
xb = p[0][0]
yb = p[0][1]
flag = not flag
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (xa, ya))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(sz - depth))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) % (xb, yb))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
if border:
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
(corners[0][0], corners[0][1]))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(sz - depth))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(corners[1][0], corners[1][1]))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(corners[2][0], corners[2][1]))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(corners[3][0], corners[3][1]))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) %
(corners[0][0], corners[0][1]))
self.gcode.append(
("G0 Z" + self.fmt + "" +
self.speedTerm(addspeed, feedzG0) + "\n") % (safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (sx, sy))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
class PolyPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:polyline")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Polyline %d" % PolyPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
PolyPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Point List")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.tePoints = wx.TextCtrl(self, wx.ID_ANY, "", style=wx.TE_RIGHT + wx.TE_READONLY)
self.addWidget(self.tePoints, "pointlist")
sizer.Add(self.tePoints, pos=(ln, 1), span=(1,2), flag=wx.EXPAND, border=10)
self.bEditPoints = wx.Button(self, wx.ID_ANY, "...", size=(30, 20))
self.bEditPoints.SetToolTip("Edit Point List")
bsz = wx.BoxSizer(wx.HORIZONTAL)
bsz.AddSpacer(20)
bsz.Add(self.bEditPoints)
sizer.Add(bsz, pos=(ln, 3))
self.Bind(wx.EVT_BUTTON, self.bEditPointsPressed, self.bEditPoints)
ln += 1
self.cbClosePath = wx.CheckBox(self, wx.ID_ANY, "Close Path")
self.addWidget(self.cbClosePath, "closepath")
sizer.Add(self.cbClosePath, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbClosePath)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teTotalDepth = wx.TextCtrl(self, wx.ID_ANY, "1", style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "totaldepth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
sizer.Add(self.getToolMovement(), pos=(ln, 1), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tracks")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.scTracks = wx.SpinCtrl(self, wx.ID_ANY, "", size=(50, -1), style=wx.ALIGN_RIGHT)
self.addWidget(self.scTracks, "tracks")
self.scTracks.SetRange(1,20)
self.scTracks.SetValue(1)
self.Bind(wx.EVT_SPINCTRL, self.onTracks, self.scTracks)
sz = wx.BoxSizer(wx.HORIZONTAL)
sz.AddSpacer(30)
sz.Add(self.scTracks)
sizer.Add(sz, pos=(ln, 3), border=5, flag=wx.LEFT+wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver, pos=(ln, 3), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
sizer.Add(self.getMeasurementSystem(), pos=(ln, 1), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl, pos=(ln, 0), span=(1, 4), flag=wx.LEFT+wx.EXPAND, border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit();
def getToolMovement(self):
labels = ["On Polyline", "Left of Forward", "Right of Forward"]
self.rbToolMove = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbToolMove.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def onTracks(self, _):
self.setState(True, False)
def bEditPointsPressed(self, _):
try:
data = eval(self.tePoints.GetValue())
except:
data = None
minVal = 2
if self.cbClosePath.IsChecked():
minVal = 3
dlg = PointListEditDialog(self, data, minVal)
rc = dlg.ShowModal()
if rc == wx.ID_OK:
self.tePoints.SetValue(str(dlg.getValues()))
self.setState(True, False)
dlg.Destroy()
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
data = eval(self.tePoints.GetValue())
except:
errs.append("Point List")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
closePath = self.cbClosePath.IsChecked()
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
depth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
stepover = float(self.teStepOver.GetValue())
except:
errs.append("Stepover")
if not ValidateNoEntryErrors(self, errs):
return
if closePath and len(data) < 3:
ValidateTrue(self, False, "Need >2 points for a closed path")
return
if not ValidateRange(self, stepover, 0.001, 1.0, "Stepover", "0 < x <= 1.0"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam, self.toolInfo, safez)
self.tDiam = tdiam
if self.settings.annotate:
self.gcode.append("(Polyline depth from %6.2f to %6.2f" % (sz, depth))
tracks = self.scTracks.GetValue()
tm = self.getChosen(self.rbToolMove)
passes = int(math.ceil(depth/passdepth))
if tm == "Left of Forward":
offset = tdiam/2.0
offset2 = stepover
elif tm == "Right of Forward":
offset = -tdiam/2.0
offset2 = -stepover
else:
offset = 0
offset2 = 0
if tracks != 1:
dlg = wx.MessageDialog(self, "Cannot have more than 1 track when tool movement is \"On Polyline\".\nAssuming a value of 1.",
'Only 1 Track permitted', wx.OK | wx.ICON_WARNING)
dlg.ShowModal()
dlg.Destroy()
tracks = 1
if offset != 0:
data = offsetPath(data, offset, closePath)
if data is None:
ValidateTrue(self, False, "Unable to calculate offset path for track 0")
return
if self.settings.annotate:
self.gcode.append("(Tool movement: %s)" % tm)
self.gcode.append("(Tracks: %d)" % tracks)
cz = sz - passdepth
if cz < -depth:
cz = -depth
self.gcode.append(("G0 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG0)) % (data[0][0], data[0][1]))
saveData = [x for x in data]
for p in range(passes):
if self.settings.annotate:
self.gcode.append("(pass %d at depth %6.2f)" % (p, cz))
self.gcode.append(("G1 Z"+self.fmt+self.speedTerm(addspeed, feedzG1)) % (cz))
for trk in range(tracks):
for pt in data[1:]:
self.gcode.append(("G1 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG1)) % (pt[0], pt[1]))
if closePath:
self.gcode.append(("G1 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG1)) % (data[0][0], data[0][1]))
else:
self.gcode.append(("G0 Z"+self.fmt+self.speedTerm(addspeed, feedzG0)) % (safez))
self.gcode.append(("G0 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG1)) % (data[0][0], data[0][1]))
self.gcode.append(("G1 Z"+self.fmt+self.speedTerm(addspeed, feedzG1)) % (cz))
if trk+1 < tracks: # if not last track
data = offsetPath(data, offset2, closePath)
if data is None:
ValidateTrue(self, False, "Unable to calculate offset path for track %d" % (trk+1))
return
self.gcode.append(("G1 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG1)) % (data[0][0], data[0][1]))
data = [x for x in saveData]
self.gcode.append(("G1 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG1)) % (data[0][0], data[0][1]))
cz -= passdepth
if cz < -depth:
cz = -depth
self.gcode.append(("G0 Z"+self.fmt+self.speedTerm(addspeed, feedzG0)) % (safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:polyline")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Polyline %d" % PolyPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
PolyPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Point List")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.tePoints = wx.TextCtrl(self, wx.ID_ANY, "", style=wx.TE_RIGHT + wx.TE_READONLY)
self.addWidget(self.tePoints, "pointlist")
sizer.Add(self.tePoints, pos=(ln, 1), span=(1,2), flag=wx.EXPAND, border=10)
self.bEditPoints = wx.Button(self, wx.ID_ANY, "...", size=(30, 20))
self.bEditPoints.SetToolTip("Edit Point List")
bsz = wx.BoxSizer(wx.HORIZONTAL)
bsz.AddSpacer(20)
bsz.Add(self.bEditPoints)
sizer.Add(bsz, pos=(ln, 3))
self.Bind(wx.EVT_BUTTON, self.bEditPointsPressed, self.bEditPoints)
ln += 1
self.cbClosePath = wx.CheckBox(self, wx.ID_ANY, "Close Path")
self.addWidget(self.cbClosePath, "closepath")
sizer.Add(self.cbClosePath, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbClosePath)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teTotalDepth = wx.TextCtrl(self, wx.ID_ANY, "1", style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "totaldepth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
sizer.Add(self.getToolMovement(), pos=(ln, 1), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tracks")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.scTracks = wx.SpinCtrl(self, wx.ID_ANY, "", size=(50, -1), style=wx.ALIGN_RIGHT)
self.addWidget(self.scTracks, "tracks")
self.scTracks.SetRange(1,20)
self.scTracks.SetValue(1)
self.Bind(wx.EVT_SPINCTRL, self.onTracks, self.scTracks)
sz = wx.BoxSizer(wx.HORIZONTAL)
sz.AddSpacer(30)
sz.Add(self.scTracks)
sizer.Add(sz, pos=(ln, 3), border=5, flag=wx.LEFT+wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver, pos=(ln, 3), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
sizer.Add(self.getMeasurementSystem(), pos=(ln, 1), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl, pos=(ln, 0), span=(1, 4), flag=wx.LEFT+wx.EXPAND, border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit();
class GridPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "carve:grid")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Grid Pattern %d" % GridPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
GridPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Total X Size")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSizeX = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teSizeX, "sizex")
sizer.Add(self.teSizeX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Total Y Size")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSizeY = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teSizeY, "sizey")
sizer.Add(self.teSizeY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "X Segments")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teXSegments = wx.TextCtrl(self,
wx.ID_ANY,
"10",
style=wx.TE_RIGHT)
self.addWidget(self.teXSegments, "xsegments")
sizer.Add(self.teXSegments, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Y Segments")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teYSegments = wx.TextCtrl(self,
wx.ID_ANY,
"10",
style=wx.TE_RIGHT)
self.addWidget(self.teYSegments, "ysegments")
sizer.Add(self.teYSegments, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Starting Point")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getStartingPoints(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getStartingPoints(self):
labels = [
"Lower Left", "Upper Left", "Lower Right", "Upper Right", "Center"
]
self.rbStartPoints = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbStartPoints.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
sz.Add(r)
self.addWidget(r, labels[i])
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
sizex = float(self.teSizeX.GetValue())
except:
errs.append("Size X")
try:
sizey = float(self.teSizeY.GetValue())
except:
errs.append("Size Y")
try:
totaldepth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
segmentx = int(self.teXSegments.GetValue())
except:
errs.append("X Segments")
try:
segmenty = int(self.teYSegments.GetValue())
except:
errs.append("Y Segments")
try:
self.tDiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
if not ValidateNoEntryErrors(self, errs):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), self.tDiam,
self.toolInfo, safez)
addspeed = self.cbAddSpeed.IsChecked()
segszx = sizex / segmentx
segszy = sizey / segmenty
sp = self.getChosen(self.rbStartPoints)
adjx = 0
adjy = 0
if sp == "Upper Left":
adjy = -sizey
elif sp == "Upper Right":
adjy = -sizey
adjx = -sizex
elif sp == "Lower Right":
adjx = -sizex
elif sp == "Center":
adjx = -sizex / 2
adjy = -sizey / 2
xvals = [sx + i * segszx + adjx for i in range(segmentx + 1)]
yvals = [sy + i * segszy + adjy for i in range(segmenty + 1)]
points = []
flag = False
for i in range(0, segmentx + 1):
if not flag:
points.append([xvals[i], yvals[0], xvals[i], yvals[-1]])
else:
points.append([xvals[i], yvals[-1], xvals[i], yvals[0]])
flag = not flag
flag = False
for i in range(0, segmenty + 1):
if not flag:
points.append([xvals[0], yvals[i], xvals[-1], yvals[i]])
else:
points.append([xvals[-1], yvals[i], xvals[0], yvals[i]])
flag = not flag
passes = int(math.ceil(float(totaldepth) / float(passdepth)))
if self.settings.annotate:
self.gcode.append(
"(Grid pattern start (%6.2f,%6.2f) width %6.2f height %6.2f segments %d,%d depth from %6.2f to %6.2f)"
% (sx, sy, sizex, sizey, segmentx, segmenty, sz, totaldepth))
self.gcode.append("(Start point: %s)" % sp)
depth = 0
for i in range(passes):
depth += passdepth
if depth > totaldepth: depth = totaldepth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, depth))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
safez)
for p in points:
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (p[0], p[1]))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) %
(sz - depth))
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) % (p[2], p[3]))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (sx, sy))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
def __init__(self, parent, title=DEFAULT_TITLE):
wx.Dialog.__init__(self, parent, wx.ID_ANY, title)
self.Bind(wx.EVT_CLOSE, self.onClose)
self.modified = False
self.title = title
self.parent = parent
self.settings = self.parent.settings
self.images = self.parent.images
self.gCode = []
hsizer=wx.BoxSizer(wx.HORIZONTAL)
hsizer.AddSpacer(10)
vsizer = wx.BoxSizer(wx.VERTICAL)
vsizer.AddSpacer(10)
self.gcl = GCodeList(self)
vsizer.Add(self.gcl)
vsizer.AddSpacer(20)
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
self.bAdd = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFileopen, size=BTNDIM)
self.bAdd.SetToolTip("Choose a file to add")
btnSizer.Add(self.bAdd)
self.Bind(wx.EVT_BUTTON, self.bAddPressed, self.bAdd)
btnSizer.AddSpacer(10)
self.bEdit = wx.BitmapButton(self, wx.ID_ANY, self.images.pngEdit, size=BTNDIM)
self.bEdit.SetToolTip("Modify file before merging")
btnSizer.Add(self.bEdit)
self.Bind(wx.EVT_BUTTON, self.bEditPressed, self.bEdit)
self.bEdit.Enable(False)
btnSizer.AddSpacer(10)
self.bView = wx.BitmapButton(self, wx.ID_ANY, self.images.pngView, size=BTNDIM)
self.bView.SetToolTip("Examine file and applied edits before merge")
btnSizer.Add(self.bView)
self.Bind(wx.EVT_BUTTON, self.bViewPressed, self.bView)
self.bView.Enable(False)
btnSizer.AddSpacer(10)
self.bOK = wx.BitmapButton(self, wx.ID_ANY, self.images.pngMerge, size=BTNDIM)
self.bOK.SetToolTip("Commit this file to the merge")
btnSizer.Add(self.bOK)
self.Bind(wx.EVT_BUTTON, self.bOKPressed, self.bOK)
self.bOK.Enable(False)
btnSizer.AddSpacer(20)
self.bCancel = wx.BitmapButton(self, wx.ID_ANY, self.images.pngCancel, size=BTNDIM)
self.bCancel.SetToolTip("Cancel without adding this file to the merge")
btnSizer.Add(self.bCancel)
self.Bind(wx.EVT_BUTTON, self.bCancelPressed, self.bCancel)
vsizer.Add(btnSizer, 1, wx.ALIGN_CENTER_HORIZONTAL)
vsizer.AddSpacer(20)
hsizer.Add(vsizer)
hsizer.AddSpacer(10)
self.SetSizer(hsizer)
self.Layout()
self.Fit();
class AddToMergeDialog(wx.Dialog):
def __init__(self, parent, title=DEFAULT_TITLE):
wx.Dialog.__init__(self, parent, wx.ID_ANY, title)
self.Bind(wx.EVT_CLOSE, self.onClose)
self.modified = False
self.title = title
self.parent = parent
self.settings = self.parent.settings
self.images = self.parent.images
self.gCode = []
hsizer=wx.BoxSizer(wx.HORIZONTAL)
hsizer.AddSpacer(10)
vsizer = wx.BoxSizer(wx.VERTICAL)
vsizer.AddSpacer(10)
self.gcl = GCodeList(self)
vsizer.Add(self.gcl)
vsizer.AddSpacer(20)
btnSizer = wx.BoxSizer(wx.HORIZONTAL)
self.bAdd = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFileopen, size=BTNDIM)
self.bAdd.SetToolTip("Choose a file to add")
btnSizer.Add(self.bAdd)
self.Bind(wx.EVT_BUTTON, self.bAddPressed, self.bAdd)
btnSizer.AddSpacer(10)
self.bEdit = wx.BitmapButton(self, wx.ID_ANY, self.images.pngEdit, size=BTNDIM)
self.bEdit.SetToolTip("Modify file before merging")
btnSizer.Add(self.bEdit)
self.Bind(wx.EVT_BUTTON, self.bEditPressed, self.bEdit)
self.bEdit.Enable(False)
btnSizer.AddSpacer(10)
self.bView = wx.BitmapButton(self, wx.ID_ANY, self.images.pngView, size=BTNDIM)
self.bView.SetToolTip("Examine file and applied edits before merge")
btnSizer.Add(self.bView)
self.Bind(wx.EVT_BUTTON, self.bViewPressed, self.bView)
self.bView.Enable(False)
btnSizer.AddSpacer(10)
self.bOK = wx.BitmapButton(self, wx.ID_ANY, self.images.pngMerge, size=BTNDIM)
self.bOK.SetToolTip("Commit this file to the merge")
btnSizer.Add(self.bOK)
self.Bind(wx.EVT_BUTTON, self.bOKPressed, self.bOK)
self.bOK.Enable(False)
btnSizer.AddSpacer(20)
self.bCancel = wx.BitmapButton(self, wx.ID_ANY, self.images.pngCancel, size=BTNDIM)
self.bCancel.SetToolTip("Cancel without adding this file to the merge")
btnSizer.Add(self.bCancel)
self.Bind(wx.EVT_BUTTON, self.bCancelPressed, self.bCancel)
vsizer.Add(btnSizer, 1, wx.ALIGN_CENTER_HORIZONTAL)
vsizer.AddSpacer(20)
hsizer.Add(vsizer)
hsizer.AddSpacer(10)
self.SetSizer(hsizer)
self.Layout()
self.Fit();
def setTitle(self):
self.SetTitle(self.title)
def setModified(self, flag=True):
self.modified = flag
self.setTitle()
def bOKPressed(self, _):
self.EndModal(wx.ID_OK)
def bCancelPressed(self, _):
self.doCancel()
def onClose(self, _):
self.doCancel()
def doCancel(self):
if self.modified:
dlg = wx.MessageDialog(self, 'File will not be added to merge',
'Proceed?',
wx.YES_NO | wx.ICON_WARNING)
rc = dlg.ShowModal()
dlg.Destroy()
if rc == wx.ID_NO:
return
self.EndModal(wx.ID_CANCEL)
def bAddPressed(self, _):
if self.modified:
dlg = wx.MessageDialog(self, "File \"%s\" has not been added to merge" % self.title,
'Proceed?',
wx.YES_NO | wx.ICON_WARNING)
rc = dlg.ShowModal()
dlg.Destroy()
if rc == wx.ID_NO:
return
dlg = wx.FileDialog(
self, message="Choose a file",
defaultDir=self.settings.lastloaddir,
defaultFile="",
wildcard=wildcard,
style=wx.FD_OPEN | wx.FD_FILE_MUST_EXIST | wx.FD_PREVIEW)
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
path = dlg.GetPath()
dlg.Destroy()
pdir, self.title = os.path.split(path)
if pdir != self.settings.lastloaddir:
self.settings.lastloaddir = pdir
self.settings.setModified()
with open(path, "r") as fp:
self.gCode = fp.readlines()
self.gcl.updateList(self.gCode)
self.setModified()
self.bView.Enable()
self.bEdit.Enable()
self.bOK.Enable()
def bEditPressed(self, _):
dlg = editModel(self)
rc = dlg.ShowModal()
if rc != wx.ID_OK:
dlg.Destroy()
return
dx, dy, mx, my = dlg.getEditValues()
dlg.Destroy()
if mx:
mir = gMirror()
self.gCode = [mir.mirrorX(x) for x in self.gCode]
self.gcl.updateList(self.gCode)
elif my:
mir = gMirror()
self.gCode = [mir.mirrorY(x) for x in self.gCode]
self.gcl.updateList(self.gCode)
else:
shft = gShifter(dx, dy)
self.gCode = [shft.shift(x) for x in self.gCode]
self.gcl.updateList(self.gCode)
self.setModified()
def getGCode(self):
return self.gCode
def bViewPressed(self, _):
self.gcl.visualize(title=self.title)
class CirDrillPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "drill:circle")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Circular Drill Pattern %d" % CirDrillPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
CirDrillPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Diameter")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teDiameter = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teDiameter, "diameter")
sizer.Add(self.teDiameter, pos=(ln, 1), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Hole Diameter")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teHoleDiam = wx.TextCtrl(self, wx.ID_ANY, "3", style=wx.TE_RIGHT)
self.addWidget(self.teHoleDiam, "holediameter")
sizer.Add(self.teHoleDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStepover = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepover, "stepover")
sizer.Add(self.teStepover, pos=(ln, 1), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Minimum space between")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teSpacing = wx.TextCtrl(self, wx.ID_ANY, "2", style=wx.TE_RIGHT)
self.addWidget(self.teSpacing, "spacing")
sizer.Add(self.teSpacing, pos=(ln, 3), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10)
ln += 1
szOpts = wx.BoxSizer(wx.VERTICAL)
self.cbInside = wx.CheckBox(self, wx.ID_ANY, "Inside Circle")
self.addWidget(self.cbInside, "inside")
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbInside)
szOpts.Add(self.cbInside)
szOpts.AddSpacer(10)
self.cbStagger = wx.CheckBox(self, wx.ID_ANY, "Staggered rows")
self.addWidget(self.cbStagger, "stagger")
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbStagger)
szOpts.Add(self.cbStagger)
szOpts2 = wx.BoxSizer(wx.HORIZONTAL)
szOpts2.AddSpacer(80)
szOpts2.Add(szOpts)
sizer.Add(szOpts2, pos=(ln, 0), span=(1, 2), border=5, flag=wx.TOP+wx.BOTTOM+wx.LEFT+wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
sizer.Add(self.getCuttingDirection(), pos=(ln, 3), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Depth of Cut")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teDepth = wx.TextCtrl(self, wx.ID_ANY, "1", style=wx.TE_RIGHT)
self.addWidget(self.teDepth, "depth")
sizer.Add(self.teDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbRetract = wx.CheckBox(self, wx.ID_ANY, "Retract each pass")
self.addWidget(self.cbRetract, "retract")
sizer.Add(self.cbRetract, pos=(ln, 2), span=(1,2),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbRetract)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center X")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "centerx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Center Y")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "centery")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center Z")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 1), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20)
sizer.Add(self.getMeasurementSystem(), pos=(ln, 3), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz, pos=(ln, 0), span=(1,4),
flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl, pos=(ln, 0), span=(1, 4), flag=wx.LEFT+wx.EXPAND, border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit();
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
sz.Add(r)
self.addWidget(r, labels[i])
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbCutDir.append(r)
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Center X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Center Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Center Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG23 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
cdiam = float(self.teDiameter.GetValue())
except:
errs.append("Overall Diameter")
try:
depth = float(self.teDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
hdiam = float(self.teHoleDiam.GetValue())
except:
errs.append("Hole Diameter")
try:
spacing = float(self.teSpacing.GetValue())
except:
errs.append("Spacing")
try:
stepover = float(self.teStepover.GetValue())
except:
errs.append("Stepover")
if not ValidateNoEntryErrors(self, errs):
return
inside = self.cbInside.IsChecked()
stagger = self.cbStagger.IsChecked()
retract = self.cbRetract.IsChecked()
if not ValidateToolSize(self, tdiam, hdiam, "Hole Diameter"):
return
if not ValidateMinLength(self, cdiam, hdiam + spacing, "Overall diameter", "Hole diameter + spacing"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam, self.toolInfo, safez)
if inside:
radlimit = cdiam/2 - hdiam/2
else:
radlimit = cdiam/2
minx = sx - cdiam/2
maxx = sx + cdiam/2
miny = sy - cdiam/2
maxy = sy + cdiam/2
cd = self.getChosen(self.rbCutDir)
if cd == "Clockwise":
cmd = "G2"
else:
cmd = "G3"
nrows = int((maxy - miny)/(hdiam+spacing))
ncols = int((maxx - minx)/(hdiam+spacing))
if not ValidateNonZero(self, ncols, "Number of calculated columns"):
return
if not ValidateNonZero(self, nrows, "Number of calculated rows"):
return
xstep = (maxx - minx) / float(ncols)
ystep = (maxy - miny) / float(nrows)
if stagger:
ystep *= 0.866
nrows = int((nrows/0.866)+0.5)
if self.settings.annotate:
self.gcode.append("(Circular drill pattern center (%6.2f,%6.2f) diameter %6.2f depth from %6.2f to %6.2f)" % (sx, sy, cdiam, sz, depth))
self.gcode.append("(Cut Direction: %s)" % cd)
self.gcode.append("(Inside Circle: %s)" % str(inside))
self.gcode.append("(Retract each pass: %s)" % str(retract))
self.gcode.append("(Hole diameter: %6.2f)" % hdiam)
self.gcode.append("(Stagger rows: %s)" % str(stagger))
self.gcode.append("(Calculated step x/y: %6.2f/%6.2f)" % (xstep, ystep))
self.gcode.append(("G0 Z"+self.fmt+self.speedTerm(addspeed, feedzG0)) % (safez))
points = [(sx, sy)]
ix = 1
while sx + ix*xstep <= maxx:
if ix*xstep <= radlimit:
points = [(sx - ix*xstep, sy)] + points + [(sx + ix*xstep, sy)]
ix += 1
iy = 1
while sy + iy*ystep <= maxy:
rowu = []
rowd = []
ix = 0
if stagger and iy%2 != 0:
bx = xstep/2
else:
bx = 0
while sx + ix*xstep + bx <= maxx:
r = triangulate((0,0), (ix*xstep+bx, iy*ystep))
if r <= radlimit:
if bx == 0 and ix == 0:
rowu.append((sx + ix*xstep + bx, sy + iy*ystep))
rowd.append((sx + ix*xstep + bx, sy - iy*ystep))
else:
rowu = [(sx - ix*xstep - bx, sy + iy*ystep)] + rowu + [(sx + ix*xstep + bx, sy + iy*ystep)]
rowd = [(sx - ix*xstep - bx, sy - iy*ystep)] + rowd + [(sx + ix*xstep + bx, sy - iy*ystep)]
ix += 1
points = rowu + points + rowd
iy += 1
passes = int(math.ceil(depth/passdepth))
for p in points:
self.gcode.append(("G0 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG0)) % (p[0], p[1]))
cz = sz
for i in range(passes):
cz -= passdepth
if cz < -depth:
cz = -depth
self.gcode.append(("G1 Z"+self.fmt+self.speedTerm(addspeed, feedzG1)) % (cz))
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
if hdiam > tdiam:
maxyoff = (hdiam-tdiam)/2.0
yoff = stepover
while True:
if yoff > maxyoff:
yoff = maxyoff
self.gcode.append(("G1 Y"+self.fmt+self.speedTerm(addspeed, feedxyG0)) % (p[1]-yoff))
self.gcode.append((cmd+" J"+self.fmt+" X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG23)) % (yoff, p[0], p[1]-yoff))
if yoff >= maxyoff:
break
yoff += stepover
self.gcode.append(("G1 X"+self.fmt+" Y"+self.fmt+self.speedTerm(addspeed, feedxyG23)) % (p[0], p[1]))
if retract:
self.gcode.append(("G0 Z"+self.fmt+self.speedTerm(addspeed, feedzG0)) % (safez))
if not retract:
self.gcode.append(("G0 Z"+self.fmt+self.speedTerm(addspeed, feedzG0)) % (safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:polygon")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Regular Polygon %d" % PolyPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
PolyPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Side length")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSLength = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teSLength, "sidelength")
sizer.Add(self.teSLength, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Number of Sides")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSides = wx.TextCtrl(self, wx.ID_ANY, "6", style=wx.TE_RIGHT)
self.addWidget(self.teSides, "numbersides")
sizer.Add(self.teSides, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Rotation Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "centerx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Center Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "centery")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Center Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "centerz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getToolMovement(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
self.cbPocket = wx.CheckBox(self, wx.ID_ANY, "Pocket")
self.addWidget(self.cbPocket, "pocket")
sizer.Add(self.cbPocket,
pos=(ln, 0),
span=(1, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbPocket)
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepOver = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepOver, "stepover")
sizer.Add(self.teStepOver,
pos=(ln, 3),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def __init__(self, toolInfo, speedInfo, parent): CNCObject.__init__(self, parent, "drill:circle") self.toolInfo = toolInfo self.modified = False self.unsaved = False self.viewTitle = "Circular Drill Pattern %d" % CirDrillPanel.seqNo self.titleText = "G Code Generator: %s" % self.viewTitle CirDrillPanel.seqNo += 1 wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL) self.Bind(wx.EVT_CLOSE, self.onClose) sizer = wx.GridBagSizer(wx.HORIZONTAL) sizer.Add(10, 10, wx.GBPosition(0, 4)) ln = 1 self.setTitleFlag() t = wx.StaticText(self, wx.ID_ANY, "Diameter") sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teDiameter = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT) self.addWidget(self.teDiameter, "diameter") sizer.Add(self.teDiameter, pos=(ln, 1), flag=wx.LEFT, border=10) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter") td = "%6.3f" % toolInfo["diameter"] sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT) self.addWidget(self.teToolDiam, "tooldiameter") sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10) t = wx.StaticText(self, wx.ID_ANY, "Hole Diameter") sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teHoleDiam = wx.TextCtrl(self, wx.ID_ANY, "3", style=wx.TE_RIGHT) self.addWidget(self.teHoleDiam, "holediameter") sizer.Add(self.teHoleDiam, pos=(ln, 3), flag=wx.LEFT, border=10) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Stepover") so = "%6.3f" % speedInfo["stepover"] sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teStepover = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT) self.addWidget(self.teStepover, "stepover") sizer.Add(self.teStepover, pos=(ln, 1), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10) t = wx.StaticText(self, wx.ID_ANY, "Minimum space between") sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teSpacing = wx.TextCtrl(self, wx.ID_ANY, "2", style=wx.TE_RIGHT) self.addWidget(self.teSpacing, "spacing") sizer.Add(self.teSpacing, pos=(ln, 3), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10) ln += 1 szOpts = wx.BoxSizer(wx.VERTICAL) self.cbInside = wx.CheckBox(self, wx.ID_ANY, "Inside Circle") self.addWidget(self.cbInside, "inside") self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbInside) szOpts.Add(self.cbInside) szOpts.AddSpacer(10) self.cbStagger = wx.CheckBox(self, wx.ID_ANY, "Staggered rows") self.addWidget(self.cbStagger, "stagger") self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbStagger) szOpts.Add(self.cbStagger) szOpts2 = wx.BoxSizer(wx.HORIZONTAL) szOpts2.AddSpacer(80) szOpts2.Add(szOpts) sizer.Add(szOpts2, pos=(ln, 0), span=(1, 2), border=5, flag=wx.TOP+wx.BOTTOM+wx.LEFT+wx.ALIGN_CENTER_VERTICAL) t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction") sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) sizer.Add(self.getCuttingDirection(), pos=(ln, 3), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Depth of Cut") sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teDepth = wx.TextCtrl(self, wx.ID_ANY, "1", style=wx.TE_RIGHT) self.addWidget(self.teDepth, "depth") sizer.Add(self.teDepth, pos=(ln, 1), flag=wx.LEFT, border=10) t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass") dpp = "%6.3f" % speedInfo["depthperpass"] sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT) self.addWidget(self.tePassDepth, "passdepth") sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10) ln += 1 self.cbRetract = wx.CheckBox(self, wx.ID_ANY, "Retract each pass") self.addWidget(self.cbRetract, "retract") sizer.Add(self.cbRetract, pos=(ln, 2), span=(1,2), flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5) self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbRetract) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Center X") sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT) self.addWidget(self.teStartX, "centerx") sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10) t = wx.StaticText(self, wx.ID_ANY, "Center Y") sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT) self.addWidget(self.teStartY, "centery") sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Center Z") sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT) self.addWidget(self.teStartZ, "startz") sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10) t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface") sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT) self.addWidget(self.teSafeZ, "safez") sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10) ln += 1 self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter") self.addWidget(self.cbAddSpeed, "addspeed") sizer.Add(self.cbAddSpeed, pos=(ln, 0), span=(1,4), flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5) self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed) self.cbAddSpeed.SetValue(self.settings.addspeed) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)") g0xy = "%7.2f" % speedInfo["G0XY"] sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT) self.addWidget(self.teFeedXYG0, "feedXYG0") sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10) t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)") g1xy = "%7.2f" % speedInfo["G1XY"] sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT) self.addWidget(self.teFeedXYG1, "feedXYG1") sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)") g0z = "%7.2f" % speedInfo["G0Z"] sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT) self.addWidget(self.teFeedZG0, "feedZG0") sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10) t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)") g1z = "%7.2f" % speedInfo["G1Z"] sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT) self.addWidget(self.teFeedZG1, "feedZG1") sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10) self.teFeedXYG0.Enable(self.settings.addspeed) self.teFeedXYG1.Enable(self.settings.addspeed) self.teFeedZG0.Enable(self.settings.addspeed) self.teFeedZG1.Enable(self.settings.addspeed) ln += 1 t = wx.StaticText(self, wx.ID_ANY, "Decimal Places") sizer.Add(t, pos=(ln, 0), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT) self.addWidget(self.teDecimals, "decimals") sizer.Add(self.teDecimals, pos=(ln, 1), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=10) t = wx.StaticText(self, wx.ID_ANY, "Measurement System") sizer.Add(t, pos=(ln, 2), flag=wx.LEFT+wx.ALIGN_CENTER_VERTICAL, border=20) sizer.Add(self.getMeasurementSystem(), pos=(ln, 3), border=5, flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_VERTICAL) ln += 1 sizer.Add(20, 20, wx.GBPosition(ln, 0)) ln += 1 bsz = self.buttons() sizer.Add(bsz, pos=(ln, 0), span=(1,4), flag=wx.TOP+wx.BOTTOM+wx.ALIGN_CENTER_HORIZONTAL, border=5) ln += 1 sizer.Add(10, 10, wx.GBPosition(ln, 0)) ln += 1 self.gcl = GCodeList(self) sizer.Add(self.gcl, pos=(ln, 0), span=(1, 4), flag=wx.LEFT+wx.EXPAND, border=10) ln += 1 sizer.Add(10, 10, wx.GBPosition(ln, 0)) self.Bind(wx.EVT_TEXT, self.onChange) self.Bind(wx.EVT_RADIOBUTTON, self.onChange) self.SetSizer(sizer) self.Layout() self.Fit();
class RecDrillPanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "drill:rectangle")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Rectangular Drill Pattern %d" % RecDrillPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
RecDrillPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Height")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teHeight = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teHeight, "height")
sizer.Add(self.teHeight, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Width")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teWidth = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teWidth, "width")
sizer.Add(self.teWidth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Angle")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle,
pos=(ln, 3),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Hole Diameter")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teHoleDiam = wx.TextCtrl(self, wx.ID_ANY, "3", style=wx.TE_RIGHT)
self.addWidget(self.teHoleDiam, "holediameter")
sizer.Add(self.teHoleDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Minimum space between")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSpacing = wx.TextCtrl(self, wx.ID_ANY, "2", style=wx.TE_RIGHT)
self.addWidget(self.teSpacing, "spacing")
sizer.Add(self.teSpacing,
pos=(ln, 3),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
szOpts = wx.BoxSizer(wx.VERTICAL)
self.cbInside = wx.CheckBox(self, wx.ID_ANY, "Inside Rectangle")
self.addWidget(self.cbInside, "inside")
szOpts.AddSpacer(20)
szOpts.Add(self.cbInside)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbInside)
self.cbPerimeter = wx.CheckBox(self, wx.ID_ANY, "Perimeter Only")
self.addWidget(self.cbPerimeter, "perimeter")
szOpts.AddSpacer(10)
szOpts.Add(self.cbPerimeter)
self.Bind(wx.EVT_CHECKBOX, self.onCbPerimeter, self.cbPerimeter)
self.cbStagger = wx.CheckBox(self, wx.ID_ANY, "Staggered rows")
self.addWidget(self.cbStagger, "stagger")
szOpts.AddSpacer(10)
szOpts.Add(self.cbStagger)
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbStagger)
sizer.Add(szOpts,
pos=(ln, 0),
span=(2, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
t = wx.StaticText(self, wx.ID_ANY, "Cutting Direction")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getCuttingDirection(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Starting Point")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getStartingPoints(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Depth of Cut")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDepth = wx.TextCtrl(self, wx.ID_ANY, "1", style=wx.TE_RIGHT)
self.addWidget(self.teDepth, "depth")
sizer.Add(self.teDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbRetract = wx.CheckBox(self, wx.ID_ANY,
"Retract after each pass")
self.addWidget(self.cbRetract, "retract")
sizer.Add(self.cbRetract,
pos=(ln, 2),
span=(1, 2),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbRetract)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Stepover")
so = "%6.3f" % speedInfo["stepover"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStepover = wx.TextCtrl(self, wx.ID_ANY, so, style=wx.TE_RIGHT)
self.addWidget(self.teStepover, "stepover")
sizer.Add(self.teStepover,
pos=(ln, 1),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals,
pos=(ln, 1),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=10)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getStartingPoints(self):
labels = [
"Lower Left", "Upper Left", "Lower Right", "Upper Right", "Center"
]
self.rbStartPoints = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
sz.Add(r)
self.addWidget(r, labels[i])
self.rbStartPoints.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
sz.Add(r)
self.addWidget(r, labels[i])
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def getCuttingDirection(self):
labels = ["Clockwise", "Counter Clockwise"]
self.rbCutDir = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbCutDir.append(r)
return sz
def onCbPerimeter(self, _):
self.setState(True, False)
flag = self.cbPerimeter.IsChecked()
self.cbStagger.Enable(not flag)
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bVisualize.Enable(False)
self.bSave.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
angle = float(self.teAngle.GetValue())
except:
errs.append("Angle")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG23 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
height = float(self.teHeight.GetValue())
except:
errs.append("Height")
try:
width = float(self.teWidth.GetValue())
except:
errs.append("Width")
try:
depth = float(self.teDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
stepover = float(self.teStepover.GetValue())
except:
errs.append("Stepover")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
try:
hdiam = float(self.teHoleDiam.GetValue())
except:
errs.append("Hole Diameter")
try:
spacing = float(self.teSpacing.GetValue())
except:
errs.append("Spacing")
if not ValidateNoEntryErrors(self, errs):
return
if not ValidateToolSize(self, tdiam, hdiam, "Hole Diameter"):
return
if not ValidateMinLength(self, height, hdiam + spacing, "Height",
"Hole Diameter + Spacing"):
return
if not ValidateMinLength(self, width, hdiam + spacing, "Width",
"Hole Diameter + Spacing"):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, safez)
sp = self.getChosen(self.rbStartPoints)
if sp == "Upper Left":
sy -= height
elif sp == "Upper Right":
sy -= height
sx -= width
elif sp == "Lower Right":
sx -= width
elif sp == "Center":
sx -= width / 2
sy -= height / 2
perimeteronly = self.cbPerimeter.IsChecked()
inside = self.cbInside.IsChecked()
if perimeteronly:
stagger = False
else:
stagger = self.cbStagger.IsChecked()
retract = self.cbRetract.IsChecked()
if inside:
minx = sx + hdiam / 2
maxx = sx + width - hdiam / 2
miny = sy + hdiam / 2
maxy = sy + height - hdiam / 2
else:
minx = sx
maxx = sx + width
miny = sy
maxy = sy + height
cd = self.getChosen(self.rbCutDir)
if cd == "Clockwise":
cmd = "G2"
else:
cmd = "G3"
nrows = int((maxy - miny) / (hdiam + spacing))
ncols = int((maxx - minx) / (hdiam + spacing))
xstep = (maxx - minx) / float(ncols)
ystep = (maxy - miny) / float(nrows)
if stagger:
ystep *= 0.866
nrows = int((nrows / 0.866) + 0.5)
cx = minx
cy = miny
rot = None
if angle != 0:
rot = Rotator(angle)
if self.settings.annotate:
self.gcode.append(
"(Rectangular drill pattern start (%6.2f,%6.2f) height %6.2f width %6.2f depth from %6.2f to %6.2f)"
% (sx, sy, height, width, sz, depth))
self.gcode.append("(Starting point: %s)" % sp)
self.gcode.append("(Cut Direction: %s)" % cd)
self.gcode.append("(Inside Circle: %s)" % str(inside))
self.gcode.append("(Perimeter Only: %s)" % str(perimeteronly))
self.gcode.append("(Retract each pass: %s)" % str(retract))
self.gcode.append("(Hole diameter: %6.2f)" % hdiam)
self.gcode.append("(Stagger rows: %s)" % str(stagger))
self.gcode.append("(Calculated step x/y: %6.2f/%6.2f)" %
(xstep, ystep))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) % (safez))
passes = int(math.ceil(depth / passdepth))
maxyoff = hdiam / 2 - tdiam / 2
for iy in range(nrows + 1):
for ix in range(ncols + 1):
includeHole = False
if not perimeteronly:
if cx <= maxx and cy <= maxy:
includeHole = True
else:
if ix == 0 or ix == ncols or iy == 0 or iy == nrows:
includeHole = True
if includeHole:
if rot is None:
nx = cx
ny = cy
else:
nx, ny = rot.rotate(cx, cy)
self.gcode.append(
("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (nx, ny))
cz = sz
for i in range(passes):
cz -= passdepth
if cz < -depth:
cz = -depth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" %
(i, cz))
self.gcode.append(
("G1 Z" + self.fmt +
self.speedTerm(addspeed, feedzG1)) % (cz))
if hdiam > tdiam:
maxyoff = (hdiam - tdiam) / 2.0
yoff = stepover
while True:
if yoff > maxyoff:
yoff = maxyoff
self.gcode.append(
("G1 Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) %
(ny - yoff))
self.gcode.append(
(cmd + " J" + self.fmt + " X" + self.fmt +
" Y" + self.fmt +
self.speedTerm(addspeed, feedxyG23)) %
(yoff, nx, ny - yoff))
if yoff >= maxyoff:
break
yoff += stepover
self.gcode.append(
("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG23)) %
(nx, ny))
if retract:
self.gcode.append(
("G0 Z" + self.fmt +
self.speedTerm(addspeed, feedzG0)) % (safez))
if not retract:
self.gcode.append(
("G0 Z" + self.fmt +
self.speedTerm(addspeed, feedzG0)) % (safez))
cx += xstep
cy += ystep
if stagger and iy % 2 == 0:
cx = minx + xstep / 2
else:
cx = minx
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.setState(False, True)
self.bVisualize.Enable()
self.bSave.Enable()
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "carve:hatch")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Cross Hatch Pattern %d" % GridPanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
GridPanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
self.Bind(wx.EVT_CLOSE, self.onClose)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
self.setTitleFlag()
t = wx.StaticText(self, wx.ID_ANY, "Total X Size")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSizeX = wx.TextCtrl(self, wx.ID_ANY, "100", style=wx.TE_RIGHT)
self.addWidget(self.teSizeX, "sizex")
sizer.Add(self.teSizeX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Total Y Size")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSizeY = wx.TextCtrl(self, wx.ID_ANY, "100", style=wx.TE_RIGHT)
self.addWidget(self.teSizeY, "sizey")
sizer.Add(self.teSizeY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Perpendicular Gap")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teGap = wx.TextCtrl(self, wx.ID_ANY, "10", style=wx.TE_RIGHT)
self.addWidget(self.teGap, "gap")
sizer.Add(self.teGap, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiam")
sizer.Add(self.teToolDiam, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Angle")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teAngle = wx.TextCtrl(self, wx.ID_ANY, "45", style=wx.TE_RIGHT)
self.addWidget(self.teAngle, "angle")
sizer.Add(self.teAngle, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Y Offset")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teYOffset = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teYOffset, "yoffset")
sizer.Add(self.teYOffset, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Starting Point")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getStartingPoints(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Add Border")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.cbBorder = wx.CheckBox(self, wx.ID_ANY)
self.addWidget(self.cbBorder, "border")
self.Bind(wx.EVT_CHECKBOX, self.onChange, self.cbBorder)
sizer.Add(self.cbBorder,
pos=(ln, 1),
flag=wx.LEFT + wx.RIGHT + wx.ALIGN_CENTER_VERTICAL,
border=10)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
class LinePanel(wx.Panel, CNCObject):
seqNo = 1
def __init__(self, toolInfo, speedInfo, parent):
CNCObject.__init__(self, parent, "contour:line")
self.toolInfo = toolInfo
self.modified = False
self.unsaved = False
self.viewTitle = "Line %d" % LinePanel.seqNo
self.titleText = "G Code Generator: %s" % self.viewTitle
self.setTitleFlag()
LinePanel.seqNo += 1
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.TAB_TRAVERSAL)
sizer = wx.GridBagSizer(wx.HORIZONTAL)
sizer.Add(10, 10, wx.GBPosition(0, 4))
ln = 1
t = wx.StaticText(self, wx.ID_ANY, "Start X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartX = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartX, "startx")
sizer.Add(self.teStartX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Start Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartY = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartY, "starty")
sizer.Add(self.teStartY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "End X")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teEndX = wx.TextCtrl(self, wx.ID_ANY, "100", style=wx.TE_RIGHT)
self.addWidget(self.teEndX, "endx")
sizer.Add(self.teEndX, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "End Y")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teEndY = wx.TextCtrl(self, wx.ID_ANY, "100", style=wx.TE_RIGHT)
self.addWidget(self.teEndY, "endy")
sizer.Add(self.teEndY, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Start Z")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teStartZ = wx.TextCtrl(self, wx.ID_ANY, "0", style=wx.TE_RIGHT)
self.addWidget(self.teStartZ, "startz")
sizer.Add(self.teStartZ, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Safe Z above surface")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teSafeZ = wx.TextCtrl(self, wx.ID_ANY, "0.5", style=wx.TE_RIGHT)
self.addWidget(self.teSafeZ, "safez")
sizer.Add(self.teSafeZ, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Total Depth")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teTotalDepth = wx.TextCtrl(self,
wx.ID_ANY,
"1",
style=wx.TE_RIGHT)
self.addWidget(self.teTotalDepth, "depth")
sizer.Add(self.teTotalDepth, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Depth/Pass")
dpp = "%6.3f" % speedInfo["depthperpass"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.tePassDepth = wx.TextCtrl(self, wx.ID_ANY, dpp, style=wx.TE_RIGHT)
self.addWidget(self.tePassDepth, "passdepth")
sizer.Add(self.tePassDepth, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
self.cbAddSpeed = wx.CheckBox(self, wx.ID_ANY, "Add Speed Parameter")
self.addWidget(self.cbAddSpeed, "addspeed")
sizer.Add(self.cbAddSpeed,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
self.Bind(wx.EVT_CHECKBOX, self.onCbAddSpeed, self.cbAddSpeed)
self.cbAddSpeed.SetValue(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G0)")
g0xy = "%7.2f" % speedInfo["G0XY"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG0 = wx.TextCtrl(self, wx.ID_ANY, g0xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG0, "feedXYG0")
sizer.Add(self.teFeedXYG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate XY (G1)")
g1xy = "%7.2f" % speedInfo["G1XY"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedXYG1 = wx.TextCtrl(self, wx.ID_ANY, g1xy, style=wx.TE_RIGHT)
self.addWidget(self.teFeedXYG1, "feedXYG1")
sizer.Add(self.teFeedXYG1, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G0)")
g0z = "%7.2f" % speedInfo["G0Z"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG0 = wx.TextCtrl(self, wx.ID_ANY, g0z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG0, "feedZG0")
sizer.Add(self.teFeedZG0, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Feed Rate Z (G1)")
g1z = "%7.2f" % speedInfo["G1Z"]
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teFeedZG1 = wx.TextCtrl(self, wx.ID_ANY, g1z, style=wx.TE_RIGHT)
self.addWidget(self.teFeedZG1, "feedZG1")
sizer.Add(self.teFeedZG1, pos=(ln, 3), flag=wx.LEFT, border=10)
self.teFeedXYG0.Enable(self.settings.addspeed)
self.teFeedXYG1.Enable(self.settings.addspeed)
self.teFeedZG0.Enable(self.settings.addspeed)
self.teFeedZG1.Enable(self.settings.addspeed)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Diameter")
td = "%6.3f" % toolInfo["diameter"]
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teToolDiam = wx.TextCtrl(self, wx.ID_ANY, td, style=wx.TE_RIGHT)
self.addWidget(self.teToolDiam, "tooldiameter")
sizer.Add(self.teToolDiam, pos=(ln, 1), flag=wx.LEFT, border=10)
t = wx.StaticText(self, wx.ID_ANY, "Decimal Places")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
self.teDecimals = wx.TextCtrl(self, wx.ID_ANY, "4", style=wx.TE_RIGHT)
self.addWidget(self.teDecimals, "decimals")
sizer.Add(self.teDecimals, pos=(ln, 3), flag=wx.LEFT, border=10)
ln += 1
t = wx.StaticText(self, wx.ID_ANY, "Tool Movement")
sizer.Add(t,
pos=(ln, 0),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getToolMovement(),
pos=(ln, 1),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
t = wx.StaticText(self, wx.ID_ANY, "Measurement System")
sizer.Add(t,
pos=(ln, 2),
flag=wx.LEFT + wx.ALIGN_CENTER_VERTICAL,
border=20)
sizer.Add(self.getMeasurementSystem(),
pos=(ln, 3),
border=5,
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_VERTICAL)
ln += 1
sizer.Add(20, 20, wx.GBPosition(ln, 0))
ln += 1
bsz = self.buttons()
sizer.Add(bsz,
pos=(ln, 0),
span=(1, 4),
flag=wx.TOP + wx.BOTTOM + wx.ALIGN_CENTER_HORIZONTAL,
border=5)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
ln += 1
self.gcl = GCodeList(self)
sizer.Add(self.gcl,
pos=(ln, 0),
span=(1, 4),
flag=wx.LEFT + wx.EXPAND,
border=10)
ln += 1
sizer.Add(10, 10, wx.GBPosition(ln, 0))
self.Bind(wx.EVT_TEXT, self.onChange)
self.Bind(wx.EVT_RADIOBUTTON, self.onChange)
self.SetSizer(sizer)
self.Layout()
self.Fit()
def getToolMovement(self):
labels = [
"Centered", "Left of forward motion", "Right of forward motion"
]
self.rbToolMove = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbToolMove.append(r)
return sz
def getMeasurementSystem(self):
labels = ["Metric", "Imperial"]
self.rbMeas = []
sz = wx.BoxSizer(wx.VERTICAL)
for i in range(len(labels)):
if i == 0:
style = wx.RB_GROUP
else:
style = 0
r = wx.RadioButton(self, wx.ID_ANY, labels[i], style=style)
self.addWidget(r, labels[i])
sz.Add(r)
self.rbMeas.append(r)
if self.settings.metric:
self.setChosen(self.rbMeas, "Metric")
else:
self.setChosen(self.rbMeas, "Imperial")
return sz
def onCbAddSpeed(self, _):
self.setState(True, False)
flag = self.cbAddSpeed.IsChecked()
self.teFeedXYG0.Enable(flag)
self.teFeedXYG1.Enable(flag)
self.teFeedZG0.Enable(flag)
self.teFeedZG1.Enable(flag)
def bGeneratePressed(self, _):
self.bSave.Enable(False)
self.bVisualize.Enable(False)
self.gcl.clear()
self.gcode = []
errs = []
try:
dec = int(self.teDecimals.GetValue())
self.fmt = "%0." + str(dec) + "f"
except:
errs.append("Decimal Places")
try:
sx = float(self.teStartX.GetValue())
except:
errs.append("Start X")
try:
sy = float(self.teStartY.GetValue())
except:
errs.append("Start Y")
try:
ex = float(self.teEndX.GetValue())
except:
errs.append("End X")
try:
ey = float(self.teEndY.GetValue())
except:
errs.append("End Y")
try:
sz = float(self.teStartZ.GetValue())
except:
errs.append("Start Z")
try:
safez = float(self.teSafeZ.GetValue())
except:
errs.append("Safe Z")
addspeed = self.cbAddSpeed.IsChecked()
try:
feedzG0 = float(self.teFeedZG0.GetValue())
except:
errs.append("Z G0 Speed")
try:
feedzG1 = float(self.teFeedZG1.GetValue())
except:
errs.append("Z G1 Speed")
try:
feedxyG0 = float(self.teFeedXYG0.GetValue())
except:
errs.append("XY G0 Speed")
try:
feedxyG1 = float(self.teFeedXYG1.GetValue())
except:
errs.append("XY G1 Speed")
try:
depth = float(self.teTotalDepth.GetValue())
except:
errs.append("Depth")
try:
passdepth = float(self.tePassDepth.GetValue())
except:
errs.append("Depth per Pass")
try:
tdiam = float(self.teToolDiam.GetValue())
except:
errs.append("Tool Diameter")
if not ValidateNoEntryErrors(self, errs):
return
self.gcode = self.preamble(self.getChosen(self.rbMeas), tdiam,
self.toolInfo, safez)
self.tDiam = tdiam
rise = float(ey) - float(sy)
run = float(ex) - float(sx)
sign = 1
if run < 0:
sign = -1
if run == 0:
trise = 0
if rise > 0:
trun = -tdiam / 2
else:
trun = tdiam / 2
else:
angler = math.atan(rise / run)
trise = sign * math.cos(angler) * tdiam / 2
trun = sign * (-(math.sin(angler) * tdiam / 2))
tm = self.getChosen(self.rbToolMove)
if tm == "Left of forward motion":
sx += trun
ex += trun
sy += trise
ey += trise
elif tm == "Right of forward motion":
sx -= trun
ex -= trun
sy -= trise
ey -= trise
if self.settings.annotate:
self.gcode.append("(Tool movement: %s)" % tm)
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) % (safez))
passes = int(math.ceil(depth / passdepth))
if self.settings.annotate:
self.gcode.append(
"(Line (%6.2f,%6.2f) to (%6.2f,%6.2f) depth from %6.2f to %6.2f)"
% (sx, sy, ex, ey, sz, depth))
cz = sz
for i in range(passes):
cz -= passdepth
if cz < -depth:
cz = -depth
if self.settings.annotate:
self.gcode.append("(Pass number %d at depth %f)" % (i, cz))
self.gcode.append(("G0 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG0)) % (sx, sy))
self.gcode.append(
("G1 Z" + self.fmt + self.speedTerm(addspeed, feedzG1)) % (cz))
self.gcode.append(("G1 X" + self.fmt + " Y" + self.fmt +
self.speedTerm(addspeed, feedxyG1)) % (ex, ey))
self.gcode.append(
("G0 Z" + self.fmt + self.speedTerm(addspeed, feedzG0)) %
(safez))
if self.settings.annotate:
self.gcode.append("(End object %s)" % self.viewTitle)
self.gcl.updateList(self.gcode)
self.bSave.Enable()
self.bVisualize.Enable()
self.setState(False, True)