class test_hsrp(TestCase):
def setUp(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
self.dev1 = Device(name='PE1', testbed=testbed, os='nxos')
# Interface
self.intf1 = Interface(name='Ethernet2/1', device=self.dev1)
self.intf1.enabled = True
self.intf1.switchport_enable = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet2/1',
' no shutdown',
' no switchport',
' exit',
]))
def test_cli_config1(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.bfd_enabled = True
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.use_bia = True
key.group_number = 1
key.authentication = 'cisco123'
key.primary_ipv4_address = '192.168.1.1/24'
key.secondary_ipv4_address = '192.168.1.2/24'
key.virtual_mac_address = 'dead.beef.dead'
key.session_name = 'gandalf'
key.preempt = True
key.priority = 110
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp bfd',
' hsrp version 2',
' hsrp delay minimum 5 reload 10',
' hsrp use-bia',
' hsrp 1',
' authentication cisco123',
' ip 192.168.1.1/24',
' ip 192.168.1.2/24 secondary',
' mac-address dead.beef.dead',
' name gandalf',
' preempt',
' priority 110',
' timers 1 3',
' track 1 decrement 20',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp bfd',
' no hsrp version 2',
' no hsrp delay minimum 5 reload 10',
' no hsrp use-bia',
' no hsrp 1',
' exit',
]))
def test_cli_config2(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.hello_msec_flag = True
key.hello_msec = 300
key.hold_msec_flag = True
key.hold_msec = 500
key.tracked_object = 1
key.authentication = 'cisco123'
key.follow = 'group10'
key.mac_refresh = 199
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5 reload 10',
' hsrp mac-refresh 199',
' hsrp 1',
' authentication cisco123',
' ip 192.168.1.1/24',
' follow group10',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' track 1',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5 reload 10',
' no hsrp mac-refresh 199',
' no hsrp 1',
' exit',
]))
def test_cli_config3(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.authentication = 'abc'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp version 2',
' hsrp delay minimum 5 reload 10',
' hsrp 1',
' authentication abc',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' timers 1 3',
' track 1 decrement 20',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp version 2',
' no hsrp delay minimum 5 reload 10',
' no hsrp 1',
' exit',
]))
def test_cli_config4(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.authentication = 'xyz'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp version 2',
' hsrp delay minimum 5 reload 10',
' hsrp 1',
' authentication xyz',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' timers 1 3',
' track 1 decrement 20',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp version 2',
' no hsrp delay minimum 5 reload 10',
' no hsrp 1',
' exit',
]))
def test_cli_config5(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.group_number = 9
key.primary_ipv4_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp version 2',
' hsrp delay minimum 5',
' hsrp 9',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp version 2',
' no hsrp delay minimum 5',
' no hsrp 9',
' exit',
]))
def test_cli_config6(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.group_number = 9
key.virtual_ip_learn = True
key.priority = 110
key.preempt = True
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 9',
' ip',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 9',
' exit',
]))
def test_cli_config_args(self):
# create Hsrp conf by taking args
hsrp1 = Hsrp(group_number=0, address_family='ipv6')
# Apply configuration
hsrp1.device_attr[self.dev1].enabled = True
key = hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.global_ipv6_address = '192:168::1:1:1/128'
key.link_local_ipv6_address = 'fe80::1'
key.hsrp_linklocal = 'auto'
key.priority = 110
key.preempt = True
# create Hsrp conf by taking args
hsrp2 = Hsrp(group_number=0)
# Apply configuration
hsrp2.device_attr[self.dev1].enabled = True
key = hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.primary_ipv4_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
# Build config
cfgs_1 = hsrp1.build_config(
apply=False) # Check config built correctly
self.assertMultiLineEqual(
str(cfgs_1[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 0 ipv6',
' ip 192:168::1:1:1/128',
' ip fe80::1',
' ip autoconfig',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs_1 = hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs_1[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 0 ipv6',
' exit',
]))
cfgs_2 = hsrp2.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs_2[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 0',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs_2 = hsrp2.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs_2[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 0',
' exit',
]))
def test_cli_config_args(self):
# create Hsrp conf by taking args
hsrp1 = Hsrp(group_number=0, address_family='ipv6')
# Apply configuration
hsrp1.device_attr[self.dev1].enabled = True
key = hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.global_ipv6_address = '192:168::1:1:1/128'
key.link_local_ipv6_address = 'fe80::1'
key.hsrp_linklocal = 'auto'
key.priority = 110
key.preempt = True
# create Hsrp conf by taking args
hsrp2 = Hsrp(group_number=0)
# Apply configuration
hsrp2.device_attr[self.dev1].enabled = True
key = hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.primary_ipv4_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
# Build config
cfgs_1 = hsrp1.build_config(
apply=False) # Check config built correctly
self.assertMultiLineEqual(
str(cfgs_1[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 0 ipv6',
' ip 192:168::1:1:1/128',
' ip fe80::1',
' ip autoconfig',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs_1 = hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs_1[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 0 ipv6',
' exit',
]))
cfgs_2 = hsrp2.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs_2[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 0',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs_2 = hsrp2.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs_2[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 0',
' exit',
]))
class test_hsrp(TestCase):
def setUp(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
self.dev1 = Device(name='PE1', testbed=testbed, os='iosxe')
# Interface
self.intf1 = Interface(name='GigabitEthernet1/0/1', device=self.dev1)
self.intf1.enabled = False
self.intf1.switchport = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface GigabitEthernet1/0/1',
' shutdown',
' no switchport',
' exit',
]))
def test_cli_config1(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.authentication = 'cisco123'
key.bfd_enabled = True
key.mac_refresh = 11
key.follow = 'test'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby bfd',
' standby delay minimum 5 reload 10',
' standby mac-refresh 11',
' standby 1 authentication cisco123',
' standby 1 follow test',
' standby 1 ip 192.168.1.254',
' standby 1 preempt',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby bfd',
' no standby delay minimum 5 reload 10',
' no standby mac-refresh 11',
' no standby 1 authentication cisco123',
' no standby 1 follow test',
' no standby 1 ip 192.168.1.254',
' no standby 1 preempt',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config2(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.254'
key.secondary_ipv4_address = '192.168.1.253'
key.priority = 110
key.preempt = True
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.authentication = 'cisco123'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby delay minimum 5 reload 10',
' standby 1 authentication cisco123',
' standby 1 ip 192.168.1.254',
' standby 1 ip 192.168.1.253 secondary',
' standby 1 preempt',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby delay minimum 5 reload 10',
' no standby 1 authentication cisco123',
' no standby 1 ip 192.168.1.254',
' no standby 1 ip 192.168.1.253 secondary',
' no standby 1 preempt',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config3(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.authentication = 'abc'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby delay minimum 5 reload 10',
' standby 1 authentication abc',
' standby 1 ip 192.168.1.254',
' standby 1 preempt',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby delay minimum 5 reload 10',
' no standby 1 authentication abc',
' no standby 1 ip 192.168.1.254',
' no standby 1 preempt',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config4(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.primary_ipv4_address = '192.168.1.254'
key.virtual_ip_learn = True
key.priority = 110
key.preempt = True
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.authentication = 'xyz'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby delay minimum 5 reload 10',
' standby 1 authentication xyz',
' standby 1 ip 192.168.1.254',
' standby 1 ip',
' standby 1 preempt',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby delay minimum 5 reload 10',
' no standby 1 authentication xyz',
' no standby 1 ip 192.168.1.254',
' no standby 1 ip',
' no standby 1 preempt',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config5(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.address_family = 'ipv6'
key.global_ipv6_address = '2001:db8::1/24'
key.link_local_ipv6_address = 'fe80::1'
key.hsrp_linklocal = 'auto'
key.minimum_delay = 5
key.group_number = 15
key.priority = 110
key.preempt = True
key.bfd_enabled = True
key.use_bia = True
key.hello_msec_flag = True
key.hello_msec = 55
key.hold_msec_flag = True
key.hold_msec = 100
key.tracked_object = 1
key.session_name = 'gandalf'
key.virtual_mac_address = 'dead.beef.dead'
key.redirects_disable = False
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby bfd',
' standby delay minimum 5',
' standby use-bia',
' standby redirect',
' standby 15 ipv6 2001:db8::1/24',
' standby 15 ipv6 fe80::1',
' standby 15 ipv6 autoconfig',
' standby 15 mac-address dead.beef.dead',
' standby 15 name gandalf',
' standby 15 preempt',
' standby 15 priority 110',
' standby 15 timers msec 55 msec 100',
' standby 15 track 1',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby bfd',
' no standby delay minimum 5',
' no standby use-bia',
' no standby redirect',
' no standby 15 ipv6 2001:db8::1/24',
' no standby 15 ipv6 fe80::1',
' no standby 15 ipv6 autoconfig',
' no standby 15 mac-address dead.beef.dead',
' no standby 15 name gandalf',
' no standby 15 preempt',
' no standby 15 priority 110',
' no standby 15 timers msec 55 msec 100',
' no standby 15 track 1',
' exit',
]))
def test_cli_config6(self):
# Hsrp object
self.hsrp1 = Hsrp()
# Apply configuration
key1 = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key1.version = 2
key1.group_number = 10
key1.priority = 110
key1.preempt = True
# Hsrp object
self.hsrp2 = Hsrp()
# Apply configuration
key2 = self.hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key2.group_number = 20
key2.priority = 120
key2.preempt = True
# Build config
cfgs1 = self.hsrp1.build_config(apply=False)
cfgs2 = self.hsrp2.build_config(apply=False)
cfgs = str(cfgs1[self.dev1.name]) + '\n' + str(cfgs2[self.dev1.name])
# Check config correctly unconfigured
self.assertMultiLineEqual(
cfgs, '\n'.join([
'interface GigabitEthernet1/0/1\n'
' standby version 2\n'
' standby 10 preempt\n'
' standby 10 priority 110\n'
' exit\n'
'interface GigabitEthernet1/0/1\n'
' standby 20 preempt\n'
' standby 20 priority 120\n'
' exit'
]))
class test_hsrp_old(TestCase):
def setUp(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
self.dev1 = Device(name='PE1', testbed=testbed, os='nxos')
# Interface
self.intf1 = Interface(name='Ethernet2/1', device=self.dev1)
self.intf1.enabled = True
self.intf1.switchport_enable = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet2/1',
' no shutdown',
' no switchport',
' exit',
]))
def test_cli_config1(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.bfd = True
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.use_bia = True
key.group_number = 1
key.authentication_word = 'cisco123'
key.ip_address = '192.168.1.1/24'
key.mac_address = 'dead.beef.dead'
key.group_name = 'gandalf'
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.preempt_sync_delay = 20
key.priority = 110
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp bfd',
' hsrp version 2',
' hsrp delay minimum 5 reload 10',
' hsrp use-bia',
' hsrp 1',
' authentication cisco123',
' ip 192.168.1.1/24',
' mac-address dead.beef.dead',
' name gandalf',
' preempt delay minimum 5 reload 10 sync 20',
' priority 110',
' timers 1 3',
' track 1 decrement 20',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp bfd',
' no hsrp version 2',
' no hsrp delay minimum 5 reload 10',
' no hsrp use-bia',
' no hsrp 1',
' exit',
]))
def test_cli_config2(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.hello_interval_msec = 300
key.holdtime_msec = 500
key.track_object = 1
key.authentication_text = 'cisco123'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5 reload 10',
' hsrp 1',
' authentication text cisco123',
' ip 192.168.1.1/24',
' preempt delay minimum 5 reload 10',
' priority 110',
' timers msec 300 msec 500',
' track 1',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5 reload 10',
' no hsrp 1',
' exit',
]))
def test_cli_config3(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_md5_keychain = 'abc'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp version 2',
' hsrp delay minimum 5 reload 10',
' hsrp 1',
' authentication md5 key-chain abc',
' ip 192.168.1.1/24',
' preempt delay minimum 5',
' priority 110',
' timers 1 3',
' track 1 decrement 20',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp version 2',
' no hsrp delay minimum 5 reload 10',
' no hsrp 1',
' exit',
]))
def test_cli_config4(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.preempt_reload_delay = 10
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_md5_keystring = 'xyz'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp version 2',
' hsrp delay minimum 5 reload 10',
' hsrp 1',
' authentication md5 key-string xyz',
' ip 192.168.1.1/24',
' preempt delay reload 10',
' priority 110',
' timers 1 3',
' track 1 decrement 20',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp version 2',
' no hsrp delay minimum 5 reload 10',
' no hsrp 1',
' exit',
]))
def test_cli_config5(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.group_number = 9
key.ip_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
key.preempt_sync_delay = 10
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp version 2',
' hsrp delay minimum 5',
' hsrp 9',
' ip 192.168.1.1/24',
' preempt delay sync 10',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp version 2',
' no hsrp delay minimum 5',
' no hsrp 9',
' exit',
]))
def test_cli_config6(self):
# Apply configuration
self.hsrp1.device_attr[self.dev1].enabled = True
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.group_number = 9
key.ip_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 9',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 9',
' exit',
]))
def test_cli_config_args(self):
# create Hsrp conf by taking args
hsrp1 = Hsrp(group_number=0, address_family='ipv6')
# Apply configuration
hsrp1.device_attr[self.dev1].enabled = True
key = hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.ip_address = '192:168::1:1:1/128'
key.priority = 110
key.preempt = True
# create Hsrp conf by taking args
hsrp2 = Hsrp(group_number=0)
# Apply configuration
hsrp2.device_attr[self.dev1].enabled = True
key = hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.ip_address = '192.168.1.1/24'
key.priority = 110
key.preempt = True
# Build config
cfgs_1 = hsrp1.build_config(
apply=False) # Check config built correctly
self.assertMultiLineEqual(
str(cfgs_1[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 0 ipv6',
' ipv6 192:168::1:1:1/128',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs_1 = hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs_1[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 0 ipv6',
' exit',
]))
cfgs_2 = hsrp2.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs_2[self.dev1.name]), '\n'.join([
'feature hsrp',
'interface Ethernet2/1',
' hsrp delay minimum 5',
' hsrp 0',
' ip 192.168.1.1/24',
' preempt',
' priority 110',
' exit',
' exit',
]))
# Build unconfig
cfgs_2 = hsrp2.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs_2[self.dev1.name]), '\n'.join([
'no feature hsrp',
'interface Ethernet2/1',
' no hsrp delay minimum 5',
' no hsrp 0',
' exit',
]))
class test_hsrp_old(TestCase):
def setUp(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
self.dev1 = Device(name='PE1', testbed=testbed, os='iosxe')
# Interface
self.intf1 = Interface(name='GigabitEthernet1/0/1', device=self.dev1)
self.intf1.shutdown = False
self.intf1.switchport = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface GigabitEthernet1/0/1',
' no shutdown',
' no switchport',
' exit',
]))
def test_cli_config1(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.preempt_sync_delay = 20
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_word = 'cisco123'
key.bfd = True
key.mac_refresh = 11
key.follow = 'test'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby bfd',
' standby delay minimum 5 reload 10',
' standby mac-refresh 11',
' standby 1 authentication cisco123',
' standby 1 follow test',
' standby 1 ip 192.168.1.254',
' standby 1 preempt delay minimum 5 reload 10 sync 20',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby bfd',
' no standby delay minimum 5 reload 10',
' no standby mac-refresh 11',
' no standby 1 authentication cisco123',
' no standby 1 follow test',
' no standby 1 ip 192.168.1.254',
' no standby 1 preempt delay minimum 5 reload 10 sync 20',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config2(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_text = 'cisco123'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby delay minimum 5 reload 10',
' standby 1 authentication text cisco123',
' standby 1 ip 192.168.1.254',
' standby 1 preempt delay minimum 5 reload 10',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby delay minimum 5 reload 10',
' no standby 1 authentication text cisco123',
' no standby 1 ip 192.168.1.254',
' no standby 1 preempt delay minimum 5 reload 10',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config3(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_md5_keychain = 'abc'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby delay minimum 5 reload 10',
' standby 1 authentication md5 key-chain abc',
' standby 1 ip 192.168.1.254',
' standby 1 preempt delay minimum 5',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby delay minimum 5 reload 10',
' no standby 1 authentication md5 key-chain abc',
' no standby 1 ip 192.168.1.254',
' no standby 1 preempt delay minimum 5',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config4(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 1
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_md5_keystring = 'xyz'
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby delay minimum 5 reload 10',
' standby 1 authentication md5 key-string xyz',
' standby 1 ip 192.168.1.254',
' standby 1 preempt delay minimum 5 reload 10',
' standby 1 priority 110',
' standby 1 timers 1 3',
' standby 1 track 1 decrement 20',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby delay minimum 5 reload 10',
' no standby 1 authentication md5 key-string xyz',
' no standby 1 ip 192.168.1.254',
' no standby 1 preempt delay minimum 5 reload 10',
' no standby 1 priority 110',
' no standby 1 timers 1 3',
' no standby 1 track 1 decrement 20',
' exit',
]))
def test_cli_config5(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.group_number = 15
key.priority = 110
key.preempt = True
key.bfd = True
key.use_bia = True
key.hello_interval_msec = 55
key.holdtime_msec = 100
key.track_object = 1
key.track_shutdown = True
key.group_name = 'gandalf'
key.mac_address = 'dead.beef.dead'
key.redirect = True
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' standby version 2',
' standby bfd',
' standby delay minimum 5',
' standby use-bia',
' standby redirect',
' standby 15 mac-address dead.beef.dead',
' standby 15 name gandalf',
' standby 15 preempt',
' standby 15 priority 110',
' standby 15 timers msec 55 msec 100',
' standby 15 track 1 shutdown',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1/0/1',
' no standby version 2',
' no standby bfd',
' no standby delay minimum 5',
' no standby use-bia',
' no standby redirect',
' no standby 15 mac-address dead.beef.dead',
' no standby 15 name gandalf',
' no standby 15 preempt',
' no standby 15 priority 110',
' no standby 15 timers msec 55 msec 100',
' no standby 15 track 1 shutdown',
' exit',
]))
def test_cli_config6(self):
# Hsrp object
self.hsrp1 = Hsrp()
# Apply configuration
key1 = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key1.version = 2
key1.group_number = 10
key1.priority = 110
key1.preempt = True
key1.preempt_reload_delay = 30
# Hsrp object
self.hsrp2 = Hsrp()
# Apply configuration
key2 = self.hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key2.group_number = 20
key2.priority = 120
key2.preempt = True
key2.preempt_sync_delay = 60
# Build config
cfgs1 = self.hsrp1.build_config(apply=False)
cfgs2 = self.hsrp2.build_config(apply=False)
cfgs = str(cfgs1[self.dev1.name]) + '\n' + str(cfgs2[self.dev1.name])
# Check config correctly unconfigured
self.assertMultiLineEqual(
cfgs, '\n'.join([
'interface GigabitEthernet1/0/1\n'
' standby version 2\n'
' standby 10 preempt delay reload 30\n'
' standby 10 priority 110\n'
' exit\n'
'interface GigabitEthernet1/0/1\n'
' standby 20 preempt delay sync 60\n'
' standby 20 priority 120\n'
' exit'
]))
def test_cli_config_args(self):
# create Hsrp conf by taking args
hsrp1 = Hsrp(group_number=5, address_family='ipv6')
# Apply configuration
key = hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.hsrp_linklocal = 'auto'
key.priority = 110
key.preempt = True
key.virtual_ip_learn = True
key.hello_msec_flag = True
key.hello_msec = 300
key.hold_msec_flag = True
key.hold_msec = 500
# Build config
cfgs = hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv6',
' hsrp 5',
' address learn',
' address linklocal autoconfig',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv6',
' exit',
]))
# create Ipv4 Hsrp conf by taking args
hsrp2 = Hsrp(group_number=5)
# Apply configuration
key = hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key.priority = 110
key.preempt = True
key.hello_msec_flag = True
key.hello_msec = 400
key.hold_msec_flag = True
key.hold_msec = 500
key.follow = 'group10'
# Build config
cfgs = hsrp2.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv4',
' hsrp 5',
' slave follow group10',
' preempt',
' priority 110',
' timers msec 400 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = hsrp2.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv4',
' exit',
]))
class test_hsrp(TestCase):
def setUp(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
self.dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
# Interface
self.intf1 = Interface(name='GigabitEthernet0/0/0/1', device=self.dev1)
self.intf1.shutdown = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface GigabitEthernet0/0/0/1',
' no shutdown',
' exit',
]))
def test_cli_config1(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.bfd_interval = 30
key.bfd_detection_multiplier = 50
key.bfd_address = '192.168.1.2'
key.bfd_interface_name = 'GigabitEthernet0/0/0/1'
key.minimum_delay = 5
key.reload_delay = 10
key.mac_refresh = 20
key.use_bia = True
key.redirects_disable = True
key.address_family = 'ipv4'
key.version = 2
key.group_number = 30
key.primary_ipv4_address = '192.168.1.254'
key.secondary_ipv4_address = '192.168.1.253'
key.authentication = 'cisco123'
key.bfd_enabled = True
key.virtual_mac_address = 'dead.beef.dead'
key.session_name = 'gandalf'
key.preempt = True
key.priority = 110
key.hello_sec = 1
key.hold_sec = 3
key.tracked_object = 1
key.tracked_object_priority_decrement = 20
key.state_change_disable = True
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'message state disable',
'interface GigabitEthernet0/0/0/1',
' hsrp bfd minimum-interval 30',
' hsrp bfd multiplier 50',
' hsrp delay minimum 5 reload 10',
' hsrp use-bia',
' hsrp redirect disable',
' hsrp mac-refresh 20',
' address-family ipv4',
' hsrp version 2',
' hsrp bfd fast-detect peer 192.168.1.2 GigabitEthernet0/0/0/1',
' hsrp 30',
' address 192.168.1.254',
' address 192.168.1.253 secondary',
' authentication cisco123',
' bfd fast-detect',
' mac-address dead.beef.dead',
' name gandalf',
' preempt',
' priority 110',
' timers 1 3',
' track object 1 20',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'no message state disable',
'interface GigabitEthernet0/0/0/1',
' no hsrp bfd minimum-interval 30',
' no hsrp bfd multiplier 50',
' no hsrp delay minimum 5 reload 10',
' no hsrp use-bia',
' no hsrp redirect disable',
' no hsrp mac-refresh 20',
' no address-family ipv4',
' exit',
]))
def test_cli_config2(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.address_family = 'ipv6'
key.global_ipv6_address = '2001:db8:1:1::254/64'
key.link_local_ipv6_address = 'fe80::205:73ff:fea0:19'
key.group_number = 5
key.priority = 110
key.preempt = True
key.hello_msec_flag = True
key.hello_msec = 300
key.hold_msec_flag = True
key.hold_msec = 500
key.tracked_interface = 'GigabitEthernet0/0/0/0'
key.tracked_intf_priority_decrement = 20
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv6',
' hsrp 5',
' address global 2001:db8:1:1::254/64',
' address linklocal fe80::205:73ff:fea0:19',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' track GigabitEthernet0/0/0/0 20',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv6',
' exit',
]))
def test_cli_config_args(self):
# create Hsrp conf by taking args
hsrp1 = Hsrp(group_number=5, address_family='ipv6')
# Apply configuration
key = hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.hsrp_linklocal = 'auto'
key.priority = 110
key.preempt = True
key.virtual_ip_learn = True
key.hello_msec_flag = True
key.hello_msec = 300
key.hold_msec_flag = True
key.hold_msec = 500
# Build config
cfgs = hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv6',
' hsrp 5',
' address learn',
' address linklocal autoconfig',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv6',
' exit',
]))
# create Ipv4 Hsrp conf by taking args
hsrp2 = Hsrp(group_number=5)
# Apply configuration
key = hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key.priority = 110
key.preempt = True
key.hello_msec_flag = True
key.hello_msec = 400
key.hold_msec_flag = True
key.hold_msec = 500
key.follow = 'group10'
# Build config
cfgs = hsrp2.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv4',
' hsrp 5',
' slave follow group10',
' preempt',
' priority 110',
' timers msec 400 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = hsrp2.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv4',
' exit',
]))
class test_hsrp_old(TestCase):
def setUp(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
self.dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
# Interface
self.intf1 = Interface(name='GigabitEthernet0/0/0/1', device=self.dev1)
self.intf1.shutdown = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface GigabitEthernet0/0/0/1',
' no shutdown',
' exit',
]))
def test_cli_config1(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.bfd_min_interval = 30
key.bfd_multiplier = 50
key.minimum_delay = 5
key.reload_delay = 10
key.mac_refresh = 20
key.use_bia = True
key.redirect = True
key.address_family = 'ipv4'
key.version = 2
key.group_number = 30
key.ip_address = '192.168.1.254'
key.authentication_word = 'cisco123'
key.bfd_fast_detect = True
key.mac_address = 'dead.beef.dead'
key.group_name = 'gandalf'
key.preempt = True
key.preempt_minimum_delay = 5
key.priority = 110
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' hsrp bfd minimum-interval 30',
' hsrp bfd multiplier 50',
' hsrp delay minimum 5 reload 10',
' hsrp use-bia',
' hsrp redirect disable',
' hsrp mac-refresh 20',
' address-family ipv4',
' hsrp version 2',
' hsrp 30',
' address 192.168.1.254',
' authentication cisco123',
' bfd fast-detect',
' mac-address dead.beef.dead',
' name gandalf',
' preempt delay 5',
' priority 110',
' timers 1 3',
' track object 1 20',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no hsrp bfd minimum-interval 30',
' no hsrp bfd multiplier 50',
' no hsrp delay minimum 5 reload 10',
' no hsrp use-bia',
' no hsrp redirect disable',
' no hsrp mac-refresh 20',
' no address-family ipv4',
' exit',
]))
def test_cli_config2(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.address_family = 'ipv6'
key.group_number = 5
key.priority = 110
key.preempt = True
key.hello_interval_msec = 300
key.holdtime_msec = 500
# Build config
cfgs = self.hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv6',
' hsrp 5',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = self.hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv6',
' exit',
]))
def test_cli_config_args(self):
# create Hsrp conf by taking args
hsrp1 = Hsrp(group_number=5, address_family='ipv6')
# Apply configuration
key = hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.priority = 110
key.preempt = True
key.hello_interval_msec = 300
key.holdtime_msec = 500
# Build config
cfgs = hsrp1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv6',
' hsrp 5',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = hsrp1.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv6',
' exit',
]))
# create Ipv4 Hsrp conf by taking args
hsrp2 = Hsrp(group_number=5)
# Apply configuration
key = hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key.priority = 110
key.preempt = True
key.hello_interval_msec = 300
key.holdtime_msec = 500
# Build config
cfgs = hsrp2.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'router hsrp',
'interface GigabitEthernet0/0/0/1',
' address-family ipv4',
' hsrp 5',
' preempt',
' priority 110',
' timers msec 300 msec 500',
' exit',
' exit',
' exit',
]))
# Build unconfig
cfgs = hsrp2.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no router hsrp',
'interface GigabitEthernet0/0/0/1',
' no address-family ipv4',
' exit',
]))
class test_hsrp(TestCase):
def setUp(self):
# Set Genie Tb
self.testbed = Testbed()
Genie.testbed = self.testbed
# Device
self.dev1 = Device(name='PE1',
testbed=self.testbed,
os='iosxe',
context='yang')
# Interface
self.intf1 = Interface(name='GigabitEthernet1/0/1', device=self.dev1)
self.intf1.shutdown = False
self.intf1.switchport = False
# Hsrp object
self.hsrp1 = Hsrp()
# Build config
cfgs = self.intf1.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface GigabitEthernet1/0/1',
' no shutdown',
' no switchport',
' exit',
]))
def test_yang_config1(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 25
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.preempt_sync_delay = 20
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_word = 'cisco123'
key.bfd = True
key.mac_refresh = 11
key.follow = 'test'
for dev in self.testbed.devices:
dev.connections = Mock()
dev.connections = {'netconf': NetconfConnectionInfo()}
# Build config
build_cfgs = self.hsrp1.build_config(apply=False)
compare1 = ""
for i in build_cfgs['PE1']:
compare1 += str(i)
self.assertMultiLineEqual(
compare1, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <bfd></bfd>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <mac-refresh>11</mac-refresh>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <word>cisco123</word>\n'
' </authentication>\n'
' <follow>test</follow>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' <sync>20</sync>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
# Build config
build_uncfgs = self.hsrp1.build_unconfig(apply=False)
compare2 = ""
for i in build_uncfgs['PE1']:
compare2 += str(i)
self.assertMultiLineEqual(
compare2, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <bfd></bfd>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <mac-refresh>11</mac-refresh>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <word>cisco123</word>\n'
' </authentication>\n'
' <follow>test</follow>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' <sync>20</sync>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_yang_config2(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 25
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_text = 'cisco123'
# Build config
build_cfgs = self.hsrp1.build_config(apply=False)
compare1 = ""
for i in build_cfgs['PE1']:
compare1 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare1, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <word>cisco123</word>\n'
' </authentication>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>1</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
# Build unconfig
build_uncfgs = self.hsrp1.build_unconfig(apply=False)
compare2 = ""
for i in build_uncfgs['PE1']:
compare2 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare2, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <word>cisco123</word>\n'
' </authentication>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>1</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_yang_config3(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 25
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_md5_keychain = 'abc'
# Build config
build_cfgs = self.hsrp1.build_config(apply=False)
compare1 = ""
for i in build_cfgs['PE1']:
compare1 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare1, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <md5>\n'
' <key-chain>abc</key-chain>\n'
' </md5>\n'
' </authentication>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
# Build unconfig
build_uncfgs = self.hsrp1.build_unconfig(apply=False)
compare2 = ""
for i in build_uncfgs['PE1']:
compare2 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare2, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <md5>\n'
' <key-chain>abc</key-chain>\n'
' </md5>\n'
' </authentication>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_yang_config4(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 1
key.minimum_delay = 5
key.reload_delay = 10
key.group_number = 25
key.ip_address = '192.168.1.254'
key.priority = 110
key.preempt = True
key.preempt_minimum_delay = 5
key.preempt_reload_delay = 10
key.hello_interval_seconds = 1
key.holdtime_seconds = 3
key.track_object = 1
key.priority_decrement = 20
key.authentication_md5_keystring = 'xyz'
# Build config
build_cfgs = self.hsrp1.build_config(apply=False)
compare1 = ""
for i in build_cfgs['PE1']:
compare1 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare1, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <md5>\n'
' <key-string>\n'
' <string>xyz</string>\n'
' </key-string>\n'
' </md5>\n'
' </authentication>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>1</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
# Build unconfig
build_uncfgs = self.hsrp1.build_unconfig(apply=False)
compare2 = ""
for i in build_uncfgs['PE1']:
compare2 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare2, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <authentication>\n'
' <md5>\n'
' <key-string>\n'
' <string>xyz</string>\n'
' </key-string>\n'
' </md5>\n'
' </authentication>\n'
' <ip>\n'
' <address>192.168.1.254</address>\n'
' </ip>\n'
' <preempt>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' <reload>10</reload>\n'
' </delay>\n'
' </preempt>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <seconds>1</seconds>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <seconds>3</seconds>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <decrement>20</decrement>\n'
' </track>\n'
' </standby-list>\n'
' <version>1</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_yang_config5(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.group_number = 25
key.priority = 110
key.preempt = True
key.bfd = True
key.use_bia = True
key.hello_interval_msec = 55
key.holdtime_msec = 100
key.track_object = 1
key.track_shutdown = True
key.group_name = 'gandalf'
key.mac_address = 'dead.beef.dead'
# Build config
build_cfgs = self.hsrp1.build_config(apply=False)
compare1 = ""
for i in build_cfgs['PE1']:
compare1 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare1, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <bfd></bfd>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <mac-address>dead.beef.dead</mac-address>\n'
' <name>gandalf</name>\n'
' <preempt/>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <msec>55</msec>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <msec>100</msec>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <shutdown></shutdown>\n'
' </track>\n'
' </standby-list>\n'
' <use-bia>\n'
' <scope>\n'
' <interface></interface>\n'
' </scope>\n'
' </use-bia>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
# Build unconfig
build_uncfgs = self.hsrp1.build_unconfig(apply=False)
compare2 = ""
for i in build_uncfgs['PE1']:
compare2 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare2, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <bfd></bfd>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <mac-address>dead.beef.dead</mac-address>\n'
' <name>gandalf</name>\n'
' <preempt/>\n'
' <priority>110</priority>\n'
' <timers>\n'
' <hello-interval>\n'
' <msec>55</msec>\n'
' </hello-interval>\n'
' <hold-time>\n'
' <msec>100</msec>\n'
' </hold-time>\n'
' </timers>\n'
' <track>\n'
' <number>1</number>\n'
' <shutdown></shutdown>\n'
' </track>\n'
' </standby-list>\n'
' <use-bia>\n'
' <scope>\n'
' <interface></interface>\n'
' </scope>\n'
' </use-bia>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_yang_config6(self):
# Apply configuration
key = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key.version = 2
key.minimum_delay = 5
key.group_number = 25
key.priority = 110
key.preempt = True
key.ipv6_address = 'autoconfig'
# Build config
build_cfgs = self.hsrp1.build_config(apply=False)
compare1 = ""
for i in build_cfgs['PE1']:
compare1 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare1, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <ipv6>autoconfig</ipv6>\n'
' <preempt/>\n'
' <priority>110</priority>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
# Build unconfig
build_uncfgs = self.hsrp1.build_unconfig(apply=False)
compare2 = ""
for i in build_uncfgs['PE1']:
compare2 += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare2, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <delay>\n'
' <minimum>5</minimum>\n'
' </delay>\n'
' <standby-list>\n'
' <group-number>25</group-number>\n'
' <ipv6>autoconfig</ipv6>\n'
' <preempt/>\n'
' <priority>110</priority>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))
def test_yang_config7(self):
# Hsrp object
self.hsrp1 = Hsrp()
# Apply configuration
key1 = self.hsrp1.device_attr[self.dev1].interface_attr[self.intf1]
key1.version = 2
key1.group_number = 10
key1.priority = 110
key1.preempt = True
key1.preempt_reload_delay = 30
# Hsrp object
self.hsrp2 = Hsrp()
# Apply configuration
key2 = self.hsrp2.device_attr[self.dev1].interface_attr[self.intf1]
key2.group_number = 20
key2.priority = 120
key2.preempt = True
key2.preempt_sync_delay = 60
# Build config
cfgs1 = self.hsrp1.build_config(apply=False)
cfgs2 = self.hsrp2.build_config(apply=False)
compare = ""
for i in cfgs1['PE1']:
compare += str(i)
for i in cfgs2['PE1']:
compare += str(i)
# Check config built correctly
self.assertMultiLineEqual(
compare, '\n'.join([
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <standby-list>\n'
' <group-number>10</group-number>\n'
' <preempt/>\n'
' <priority>110</priority>\n'
' </standby-list>\n'
' <version>2</version>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
'<edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">\n'
' <target>\n'
' <running></running>\n'
' </target>\n'
' <config>\n'
' <GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">\n'
' <name></name>\n'
' <standby>\n'
' <standby-list>\n'
' <group-number>20</group-number>\n'
' <preempt/>\n'
' <priority>120</priority>\n'
' </standby-list>\n'
' </standby>\n'
' </GigabitEthernet>\n'
' </config>\n'
'</edit-config>\n'
]))