예제 #1
0
def run():
    xall, yall = np.loadtxt(gpr.get_com_file(0), skiprows=1, usecols=(0, 1), unpack=True)  # 2*[Rscale]
    # calculate 2D radius on the skyplane
    R = np.sqrt(xall ** 2 + yall ** 2)  # [Rscale]
    # set number and size of (linearly spaced) bins
    Rmin = 0.0  # [Rscale]
    Rmax = max(r) if gpr.rprior < 0 else 1.0 * gpr.rprior  # [Rscale]
    print("Rmax [Rscale] = ", Rmax)
    R = R[(R < Rmax)]

    # determine radius once and for all
    # this must not be changed between readout and gravlite run
    # if you wish to change: set gp.getnewdata = True in gl_params.py
    if gp.lograd:
        print(gpr.nbins, " bins in log spacings")
        Binmin, Binmax, Rbin = bin_r_log(Rmax / gpr.nbins, Rmax, gpr.nbins)
    elif gp.consttr:
        print(len(R) / gpr.nbins, " particles per bin")
        Binmin, Binmax, Rbin = bin_r_const_tracers(R, len(R) / gpr.nbins)
    else:
        print(gpr.nbins, " bins in linear spacings")
        Binmin, Binmax, Rbin = bin_r_linear(Rmin, Rmax, gpr.nbins)

    # volume of a circular ring from binmin to binmax
    vol = np.zeros(gpr.nbins)
    for k in range(gpr.nbins):
        vol[k] = 4.0 * np.pi / 3.0 * (Binmax[k] ** 3 - Binmin[k] ** 3)  # [Rscale^3]

    for comp in range(gpr.ncomp):
        print("#######  working on component ", comp)
        print("input: ", gpr.get_com_file(comp) + "_3D")
        # start from data centered on COM already:
        if gfile.bufcount(gpr.get_com_file(comp) + "_3D") < 2:
            continue
        x, y, z, v = np.loadtxt(
            gpr.get_com_file(comp) + "_3D", skiprows=1, usecols=(0, 1, 2, 3), unpack=True
        )  # 3*[Rscale], [km/s]

        # calculate 2D radius on the skyplane
        r = np.sqrt(x ** 2 + y ** 2)  # [Rscale]

        # set maximum radius (if gpr.rprior is set)
        rmax = max(r) if gpr.rprior < 0 else 1.0 * gpr.rprior  # [Rscale]
        print("rmax [Rscale] = ", rmax)
        sel = r <= rmax
        x = x[sel]
        y = y[sel]
        z = z[sel]
        v = v[sel]
        r = r[sel]  # [Rscale]
        totmass = 1.0 * len(x)  # [munit], munit = 1/star

        rs = r  # + possible starting offset, [Rscale]
        vlos = v  # + possible starting offset, [km/s]

        print("output density: ")
        print(gpr.get_ntracer_file(comp) + "_3D")
        tr = open(gpr.get_ntracer_file(comp) + "_3D", "w")
        print(totmass, file=tr)
        tr.close()

        print(gpr.get_dens_file(comp) + "_3D")
        de = open(gpr.get_dens_file(comp) + "_3D", "w")
        print("rbin", "binmin", "binmax", "nu(r)/nu(0)", "error", file=de)

        print(gpr.get_enc_mass_file(comp) + "_3D")
        em = open(gpr.get_enc_mass_file(comp) + "_3D", "w")
        print("rbin", "binmin", "binmax", "M(<r)", "error", file=em)

        # gpr.n=30 iterations for getting random picked radius values
        density = np.zeros((gpr.nbins, gpr.n))
        a = np.zeros((gpr.nbins, gpr.n))  # shared by density, siglos, kappa calcs
        for k in range(gpr.n):
            rsi = gpr.Rerror * np.random.randn(len(rs)) + rs  # [Rscale]
            vlosi = gpr.vrerror * np.random.randn(len(vlos)) + vlos  # [km/s]
            for i in range(gpr.nbins):
                ind1 = np.argwhere(np.logical_and(rsi >= Binmin[i], rsi < Binmax[i])).flatten()  # [1]
                density[i][k] = (1.0 * len(ind1)) / vol[i] * totmass  # [munit/Rscale^2]
                vlos1 = vlosi[ind1]  # [km/s]
                a[i][k] = 1.0 * len(ind1)  # [1]

        # output density
        dens0 = np.sum(density[0]) / (1.0 * gpr.n)  # [munit/Rscale^3]
        print("dens0 = ", dens0, " [munit/Rscale^3]")
        crscale = open(gpr.get_params_file(comp) + "_3D", "r")
        Rscale = np.loadtxt(crscale, comments="#", skiprows=1, unpack=False)
        crscale.close()

        cdens = open(gpr.get_params_file(comp) + "_3D", "a")
        print(dens0, file=cdens)  # [munit/Rscale^3]
        print(dens0 / Rscale ** 3, file=cdens)  # [munit/pc^3]
        print(totmass, file=cdens)  # [munit]
        cdens.close()

        ab0 = np.sum(a[0]) / (1.0 * gpr.n)  # [1]
        denserr0 = dens0 / np.sqrt(ab0)  # [munit/Rscale^3]
        p_dens = np.zeros(gpr.nbins)
        p_edens = np.zeros(gpr.nbins)
        for b in range(gpr.nbins):
            dens = np.sum(density[b]) / (1.0 * gpr.n)  # [munit/Rscale^3]
            ab = np.sum(a[b]) / (1.0 * gpr.n)  # [1]
            denserr = dens / np.sqrt(ab)  # [munit/Rscale^3]
            denserror = np.sqrt((denserr / dens0) ** 2 + (dens * denserr0 / (dens0 ** 2)) ** 2)  # [1]
            if math.isnan(denserror):
                denserror = 0.0  # [1]
                p_dens[b] = p_dens[b - 1]  # [1]
                p_edens[b] = p_edens[b - 1]  # [1]
            else:
                p_dens[b] = dens / dens0  # [1]
                p_edens[b] = denserror  # [1] #100/rbin would be artificial guess

            print(Rbin[b], Binmin[b], Binmax[b], p_dens[b], p_edens[b], file=de)  # [Rscale], 2*[dens0]
            indr = r < Binmax[b]
            menclosed = 1.0 * np.sum(indr) / totmass  # for normalization to 1  # [totmass]
            merror = menclosed / np.sqrt(ab)  # artificial menclosed/10 # [totmass]
            print(Rbin[b], Binmin[b], Binmax[b], menclosed, merror, file=em)  # [rscale], 2*[totmass]
            # TODO: check: take rbinmax for MCMC?
        de.close()
        em.close()

        if not gpr.showplots:
            continue
        # plot density
        ion()
        subplot(111)
        print("rbin = ", Rbin)
        print("p_dens = ", p_dens)
        print("p_edens = ", p_edens)

        plot(Rbin, p_dens, "b", lw=1)
        lbound = p_dens - p_edens
        lbound[lbound < 1e-6] = 1e-6
        ubound = p_dens + p_edens
        fill_between(Rbin, lbound, ubound, alpha=0.5, color="r")
        yscale("log")
        xlim([0, gpr.rprior])
        ylim([np.min(lbound), np.max(ubound)])
        xlabel(r"$r [r_c]$")
        ylabel(r"$\nu(r)/\nu(0)$")
        savefig(gpr.get_dens_png(i) + "_3D.png")
        ioff()
        show()
        clf()
예제 #2
0
def run():
    Rscale = []; Dens0Rscale = []; Dens0pc = []; Totmass = []; Maxvlos = []
    rscale = []; dens0Rscale = []; dens0pc = []; totmass = []; maxvlos = []

    for comp in range(3):
        A = np.loadtxt(gp.files.get_scale_file(comp), unpack=False, skiprows=1)
        Rscale.append(A[0])
        Dens0Rscale.append(A[1])
        Dens0pc.append(A[2])
        Totmass.append(A[3])
        
        B = np.loadtxt(gp.files.get_scale_file(comp)+'_3D', unpack=False, skiprows=1)
        rscale.append(B[0])
        dens0Rscale.append(B[1])
        dens0pc.append(B[2])
        totmass.append(B[3])
        
        print('#######  working on component ',comp)
        print('input: ',gpr.get_com_file(comp)+'_3D')
        # start from data centered on COM already:
        if gfile.bufcount(gpr.get_com_file(comp)+'_3D')<2: continue
        
        
        
        Rbin,Binmin,Binmax,Dens,Denserr = np.loadtxt(gpr.get_dens_file(comp),\
                                                     skiprows=1,usecols=(0,1,2,3,4),\
                                                     unpack=True) # 3*[Rscale], [km/s]
        Rbin*=Rscale[comp]; Binmin*=Rscale[comp]; Binmax*=Rscale[comp]; Dens*=Dens0pc[comp]; Denserr*=Dens0pc[comp]
        
        
        
        rbin,binmin,binmax,dens,denserr = np.loadtxt(gpr.get_dens_file(comp)+'_3D',\
                                                     skiprows=1,usecols=(0,1,2,3,4),\
                                                     unpack=True) # 3*[Rscale], [km/s]
        rbin*=rscale[comp]; binmin*=rscale[comp]; binmax*=rscale[comp]; dens*=dens0pc[comp]; denserr*=dens0pc[comp]
        
        
        ion()
        f=figure(figsize=(6,3))
        ax1 = f.add_subplot(121)                         # Nu
        ax2 = f.add_subplot(122, sharex=ax1)             # nu
        
        ax1.plot(Rbin, Dens,'b',lw=1)
        lbound = Dens-Denserr; lbound[lbound<1e-6] = 1e-6
        ubound = Dens+Denserr; 
        ax1.fill_between(Rbin,lbound,ubound,alpha=0.5,color='r')
        ax1.set_yscale('log')
        ax1.set_xlim([0,np.max(Binmax)])
        ax1.set_ylim([np.min(lbound),np.max(ubound)])
        ax1.set_xlabel(r'$R [R_c]$')
        ax1.set_ylabel(r'$\nu_{2D}(R)/\nu_{2D}(0)$')
        
        try:
            ax1.plot(Rbin,rho_INT_Rho(Rbin,dens,denserr))
            ax1.plot(Rbin,rho_INT_Rho(Rbin,Rho_INT_rho(Rbin,Dens,Denserr),denserr))
        except Exception as detail:
            print('rho_INT_Rho giving NaN in plotting')
        draw()
        
        
        ax2.plot(rbin, dens,'b',lw=1)
        lbound = dens-denserr; lbound[lbound<1e-6] = 1e-6
        ubound = dens+denserr;
        ax2.fill_between(rbin,lbound,ubound,alpha=0.5,color='r')
        
        ax2.set_yscale('log')
        ax2.set_xlim([0,np.max(binmax)])
        ax2.set_ylim([np.min(lbound),np.max(ubound)])
        ax2.set_xlabel(r'$r [R_c]$')
        ax2.set_ylabel(r'$\nu(r)/\nu(0)$')
        ax2.yaxis.tick_right()
        ax2.yaxis.set_label_position("right")
        draw()
        
        # projNu = rho_INT_Rho(rbin, dens) # TODO: do not forget try
        # projNu = test(rbin, binmin, binmax, dens)
        # ax1.plot(rbin, projNu)
        
        ax2.plot(rbin,Rho_INT_rho(Rbin,Dens,Denserr),color='green')
        draw()
        
        pdb.set_trace()
        ioff(); show()
예제 #3
0
def run():
    xall,yall = np.loadtxt(gpr.get_com_file(0),skiprows=1,usecols=(0,1),unpack=True) # 2*[rcore]
    # calculate 2D radius on the skyplane
    r = np.sqrt(xall**2+yall**2) #[rcore]
    # set number and size of (linearly spaced) bins
    rmin = 0. #[rcore]
    rmax = max(r) if gpr.rprior<0 else 1.0*gpr.rprior #[rcore]
    print 'rmax [rcore] = ', rmax
    r = r[(r<rmax)]

    # determine radius once and for all
    if gp.lograd:
        print gpr.nbins,' bins in log spacings'
        binmin, binmax, rbin = bin_r_log(rmax/gpr.nbins, rmax, gpr.nbins)
    elif gp.consttr:
        print len(r)/gpr.nbins,' particles per bin'
        binmin, binmax, rbin = bin_r_const_tracers(r, len(r)/gpr.nbins)
    else:
        print gpr.nbins, ' bins in linear spacings'
        binmin, binmax, rbin = bin_r_linear(rmin, rmax, gpr.nbins)

    # volume of a circular ring from binmin to binmax
    vol = np.zeros(gpr.nbins)
    for k in range(gpr.nbins):
        vol[k] = np.pi*(binmax[k]**2-binmin[k]**2) # [rcore^2]


    for comp in range(gpr.ncomp):
        print 'comp = ',comp
        print 'input: ',gpr.get_com_file(comp)
        # start from data centered on COM already:
        if gfile.bufcount(gpr.get_com_file(comp))<2: continue
        x,y,vlos = np.loadtxt(gpr.get_com_file(comp),\
                              skiprows=1,usecols=(0,1,2),unpack=True) #[rcore], [rcore], [km/s]

        # calculate 2D radius on the skyplane
        r = np.sqrt(x**2+y**2) #[rcore]
        
        # set maximum radius (if gpr.rprior is set)
        rmax = max(r) if gpr.rprior<0 else 1.0*gpr.rprior #[rcore]
        print 'rmax [rcore] = ', rmax
        sel = (r<=rmax)
        x = x[sel]; y = y[sel]; vlos = vlos[sel]; r = r[sel] #[rcore]
        totmass = 1.*len(x) #[munit], munit = 1/star

        rs = r
        # no offset from the start!
        # rs = gpr.rerror*np.random.randn(len(r))+r #[rcore]
        # vlos = gpr.vrerror*np.random.randn(len(vlos))+vlos #[km/s]



        print 'output: ',gpr.get_siglos_file(comp)
        vfil = open(gpr.get_siglos_file(comp),'w')
        print >> vfil,'r','sigma_r(r)','error'

        # 30 iterations for drawing a given radius in bin
        dispvelocity = np.zeros((gpr.nbins,gpr.n))
        a = np.zeros((gpr.nbins,gpr.n))
        p_dvlos = np.zeros(gpr.nbins)
        p_edvlos = np.zeros(gpr.nbins)

        for k in range(gpr.n):
            rsi = gpr.rerror*np.random.randn(len(rs))+rs #[rcore]
            vlosi = gpr.vrerror*np.random.randn(len(vlos))+vlos #[km/s]
            for i in range(gpr.nbins):
                ind1 = np.argwhere(np.logical_and(rsi>binmin[i],rsi<binmax[i])).flatten()
                a[i][k] = len(ind1) #[1]
                vlos1 = vlosi[ind1] #[km/s]
                if(len(ind1)<=1):
                    dispvelocity[i][k] = dispvelocity[i-1][k]
                    # attention! should be 0, uses last value
                else:
                    dispvelocity[i][k] = meanbiweight(vlos1,ci_perc=68.4,\
                                                      ci_mean=True,ci_std=True)[1]
                    # [km/s], see BiWeight.py

        for i in range(gpr.nbins):
            dispvel = np.sum(dispvelocity[i])/gpr.n #[km/s]
            ab = np.sum(a[i])/(1.*gpr.n) #[1]
            if ab == 0:
                dispvelerror = p_edvlos[i-1] #[km/s]
                # attention! uses last error
            else:
                dispvelerror = dispvel/np.sqrt(ab) #[km/s]
            p_dvlos[i] = dispvel      #[km/s]
            p_edvlos[i]= dispvelerror #[km/s]

        maxvlos = max(p_dvlos) #[km/s]
        print 'maxvlos = ',maxvlos,'[km/s]'
        fpars = open(gpr.get_params_file(comp),'a')
        print >> fpars,maxvlos          #[km/s]
        fpars.close()

        for i in range(gpr.nbins):
            #             [rcore]  [maxvlos]                  [maxvlos]
            print >> vfil,rbin[i], np.abs(p_dvlos[i]/maxvlos),np.abs(p_edvlos[i]/maxvlos) #/np.sqrt(n))
        vfil.close()

        if not gp.testplot_read: continue

        ion(); subplot(111)
        print 'rbin = ',rbin,' rcore'
        print 'p_dvlos = ',p_dvlos,' km/s'
        print 'p_edvlos = ',p_edvlos, 'km/s'
        plot(rbin,p_dvlos,'b',lw=1)
        fill_between(rbin,p_dvlos-p_edvlos,p_dvlos+p_edvlos,alpha=0.5,color='r') #[rcore],[km/s],[km/s]

        xlabel(r'$r [\mathrm{rcore}]$')
        ylabel(r'$\langle\sigma_{\mathrm{LOS}}\rangle [\mathrm{km/s}]$')
        ylim([-5,30])
        # xscale('log')
        xlim([np.min(rbin),np.max(rbin)])
        #plt.legend(['\rho','\rho'],'lower left'); #title(dwarf)
        savefig(gpr.get_siglos_png(comp))
        if gpr.showplots:
            ioff();show();clf()
예제 #4
0
def run():
    # determine radius once and for all from all tracers
    R, Phi, vzall = np.loadtxt(gpr.fileposspherical[0],
                               comments='#',unpack=True) # 2*[Rscale], [km/s]
    # set number and size of (linearly spaced) bins
    Rmin = 0.                                         # [Rscale]
    Rmax = max(R) if gpr.rprior<0 else 1.0*gpr.rprior # [Rscale]
    print('Rmax [Rscale] = ', Rmax)                   # [Rscale]
    R = R[(R<=Rmax)]                                  # [Rscale]

    # this must not be changed between readout and gravlite run
    # if you wish to change: set gp.getnewdata = True in gl_params.py
    if gp.lograd:
        Binmin, Binmax, Rbin = bin_r_log(Rmax/gpr.nbins, Rmax, gpr.nbins)
        print(gpr.nbins,' bins in log spacings')
    elif gp.consttr:
        Binmin, Binmax, Rbin = bin_r_const_tracers(R, len(R)/gpr.nbins)
        print(len(R)/gpr.nbins,' particles per bin')
    else:
        Binmin, Binmax, Rbin = bin_r_linear(Rmin, Rmax, gpr.nbins)
        print(gpr.nbins, ' bins in linear spacings')


    # volume of a circular ring from binmin to binmax
    Vol = np.zeros(gpr.nbins)
    for k in range(gpr.nbins):
        Vol[k] = np.pi*(Binmax[k]**2-Binmin[k]**2) # [Rscale^2]


    for comp in range(gpr.ncomp):
        print('#######  working on component ',comp)
        print('grh_MCMCbin: input: ',gpr.fileposspherical[comp])
        # start from data centered on COM already:
        if gfile.bufcount(gpr.fileposspherical[comp])<2: continue
        R, Phi, v = np.loadtxt(gpr.fileposspherical[comp],\
                               comments='#',unpack=True)
                               # [Rscale], [1], [km/s]
        
        # set maximum radius (if gpr.rprior is set)
        Rmax = max(R) if gpr.rprior<0 else 1.0*gpr.rprior # [Rscale]
        print('Rmax [Rscale] = ', Rmax)
        sel = (R<=Rmax)
        R = R[sel]; v = v[sel] # [Rscale], [km/s]
        totmass = 1.*len(R) # [munit], munit = 1/star
            
        Rs = R                   # + possible starting offset, [Rscale]
        vlos = v                 # + possible starting offset, [km/s]
        
        print('grh_MCMCbin: output density: ')
        print(gpr.get_ntracer_file(comp))
        tr = open(gpr.get_ntracer_file(comp),'w')
        print(totmass, file=tr)
        tr.close()

        print(gpr.filedenfalloff[comp])
        de = open(gpr.filedenfalloff[comp],'w')
        print('Rbin [Rscale]','Binmin [Rscale]','Binmax [Rscale]',\
              'Nu(R)/Nu(0) [1]','error [1]', file=de)

        print(gpr.filemass[comp])
        em = open(gpr.filemass[comp],'w')
        print('R [Rscale]','Binmin [Rscale]','Binmax [Rscale]',\
              'M(<Binmax) [Msun]','error [Msun]', file=em)


        print('grh_MCMCbin: output siglos: ',gpr.filesig[comp])
        sigfil = open(gpr.filesig[comp],'w')
        print('R [Rscale]','Binmin [Rscale]','Binmax [Rscale]',\
              'sigma_r(R) [km/s]','error [km/s]', file=sigfil)


        print('grh_MCMCbin: output kurtosis: ',gpr.filekappa[comp])
        kappafil = open(gpr.filekappa[comp],'w')
        print('R [Rscale]','Binmin [Rscale]','Binmax [Rscale]',\
              'kappa_los(R) [1]','error [1]', file=kappafil)


        # gpr.n=30 iterations for getting random picked radius values
        Density = np.zeros((gpr.nbins,gpr.n))
        dispvelocity = np.zeros((gpr.nbins,gpr.n))
        mom4         = np.zeros((gpr.nbins,gpr.n))
        a            = np.zeros((gpr.nbins,gpr.n))
        # 'a' shared by density, siglos, kappa calcs
        for k in range(gpr.n):
            Rsi = gpr.Rerror * np.random.randn(len(Rs)) + Rs # [Rscale]
            vlosi = gpr.vrerror * np.random.randn(len(vlos)) + vlos # [km/s]
            for i in range(gpr.nbins):
                ind1 = np.argwhere(np.logical_and(Rsi >= Binmin[i],Rsi<Binmax[i])).flatten() # [1]
                Density[i][k] = (1.*len(ind1))/Vol[i]*totmass # [munit/rscale**2]
                vlos1 = vlosi[ind1] # [km/s]

                if(len(ind1)<=1):
                    dispvelocity[i][k] = dispvelocity[i-1][k]
                    mom4[i][k] = mom4[i-1][k]
                    # attention! should be 0, uses last value
                else:
                    dispvelocity[i][k] = meanbiweight(vlos1,ci_perc=68.4,ci_mean=True,ci_std=True)[1]
                                        # [km/s], see BiWeight.py
                    mom4[i][k] = kurtosis(vlos1, axis=0, fisher=False, bias=False) # [1]
                a[i][k] = 1.*len(ind1) #[1]

        # output density
        Dens0 = np.sum(Density[0])/(1.*gpr.n) # [munit/Rscale^2]
        print('Dens0 = ',Dens0,'[munit/Rscale^2]')
        crscale = open(gpr.get_params_file(comp),'r')
        Rscale = np.loadtxt(crscale, comments='#', unpack=False) # [pc]
        crscale.close()

        cdens = open(gpr.get_params_file(comp),'a')
        print(Dens0, file=cdens)               # [munit/Rscale^2]
        print(Dens0*Rscale**2, file=cdens)     # [munit/pc^2]
        print(totmass, file=cdens)             # [munit]
        cdens.close()

        ab0   = np.sum(a[0])/(1.*gpr.n)     # [1]
        Denserr0 = Dens0/np.sqrt(ab0)       # [munit/Rscale^2]
        P_dens  = np.zeros(gpr.nbins);  P_edens = np.zeros(gpr.nbins)
        for b in range(gpr.nbins):
            Dens = np.sum(Density[b])/(1.*gpr.n) # [munit/Rscale^2]
            ab   = np.sum(a[b])/(1.*gpr.n)       # [1]
            Denserr = Dens/np.sqrt(ab)       # [munit/Rscale^2]
            Denserror = np.sqrt((Denserr/Dens0)**2+(Dens*Denserr0/(Dens0**2))**2) # [1]
            if(math.isnan(Denserror)):
                Denserror = 0. # [1]
                P_dens[b] = P_dens[b-1]  # [1]
                P_edens[b]= P_edens[b-1] # [1]
            else:
                P_dens[b] = Dens/Dens0   # [1]
                P_edens[b]= Denserror    # [1] #100/rbin would be artificial guess

            print(Rbin[b],Binmin[b],Binmax[b],P_dens[b],P_edens[b], file=de)
            # [Rscale], [dens0], [dens0]
            indr = (R<Binmax[b])
            Menclosed = 1.0*np.sum(indr)/totmass # for normalization to 1  # [totmass]
            Merror = Menclosed/np.sqrt(ab) # or artificial Menclosed/10 # [totmass]
            print(Rbin[b], Binmin[b], Binmax[b], Menclosed, Merror, file=em)
            # [Rscale], 2* [totmass]
        de.close()
        em.close()


        # output siglos
        p_dvlos = np.zeros(gpr.nbins);        p_edvlos = np.zeros(gpr.nbins)
        for b in range(gpr.nbins):
            dispvel = np.sum(dispvelocity[b])/gpr.n # [km/s]
            ab = np.sum(a[b])/(1.*gpr.n)            # [1]
            if ab == 0:
                dispvelerror = p_edvlos[b-1] # [km/s]
                # attention! uses last error
            else:
                dispvelerror = dispvel/np.sqrt(ab) # [km/s]
            p_dvlos[b] = dispvel                   # [km/s]
            p_edvlos[b]= dispvelerror              # [km/s]

        maxvlos = max(p_dvlos)          # [km/s]
        print('maxvlos = ',maxvlos,'[km/s]')
        fpars = open(gpr.get_params_file(comp),'a')
        print(maxvlos, file=fpars)      # [km/s]
        fpars.close()
        
        for b in range(gpr.nbins):
            #     [Rscale] [Rscale]  [Rscale]   [maxvlos]                  [maxvlos]
            print(Rbin[b],Binmin[b],Binmax[b], np.abs(p_dvlos[b]/maxvlos),np.abs(p_edvlos[b]/maxvlos), file=sigfil)
            # TODO: check uncommented /np.sqrt(n))
        sigfil.close()



        # output kurtosis kappa
        p_kappa = np.zeros(gpr.nbins) # needed for plotting later
        p_ekappa = np.zeros(gpr.nbins)
        for b in range(gpr.nbins):
            kappavel = np.sum(mom4[b])/gpr.n # [1]
            ab = np.sum(a[b])/(1.*gpr.n)     # [1]
            if ab == 0:
                kappavelerror = p_edvlos[b-1] # [1]
                # attention! uses last error
            else:
                kappavelerror = np.abs(kappavel/np.sqrt(ab)) # [1]
            p_kappa[b] = kappavel
            p_ekappa[b] = kappavelerror
            
            print(Rbin[b],Binmin[b],Binmax[b],\
                  kappavel, kappavelerror, file=kappafil) # 3*[Rscale], 2*[1]
            # TODO: /np.sqrt(n))
        kappafil.close()


    


        if not gpr.showplots: continue
        # plot density
        ion(); subplot(111)
        print('Rbin = ',Rbin)
        print('P_dens = ',P_dens)
        print('P_edens = ',P_edens)


        plot(Rbin,P_dens,'b',lw=1)
        lbound = P_dens-P_edens; lbound[lbound<1e-6] = 1e-6
        ubound = P_dens+P_edens; 
        fill_between(Rbin, lbound, ubound, alpha=0.5, color='r')
        yscale('log')
        xlim([0,3.])
        ylim([np.min(lbound), np.max(ubound)])
        xlabel(r'$R [R_c]$')
        ylabel(r'$\nu_{2D}(R)/\nu_{2D}(0)$')
        savefig(gpr.get_dens_png(comp))
        # from gl_analytic import Sigma_anf
        # plot(Rbin, Sigma_anf(Rbin*Rscale))  # Sigma_anf argument in [pc] !

        ioff(); show(); clf()

        # plot siglos
        ion(); subplot(111)
        print('Rbin = ',Rbin,' Rscale')
        print('p_dvlos = ',p_dvlos,' km/s')
        print('p_edvlos = ',p_edvlos, 'km/s')
        plot(Rbin,p_dvlos,'b',lw=1)
        fill_between(Rbin,p_dvlos-p_edvlos,p_dvlos+p_edvlos,alpha=0.5,color='r') #[rscale],2*[km/s]

        xlabel(r'$R [\mathrm{Rscale}]$')
        ylabel(r'$\langle\sigma_{\mathrm{LOS}}\rangle [\mathrm{km/s}]$')
        ylim([0.,1.5*max(p_dvlos)])
        xlim([0,3])
        savefig(gpr.get_siglos_png(comp))
        # from gl_analytic import sig_los_anf
        # plot(Rbin,sig_los_anf(Rbin*Rscale)) # argument must be [pc] !

        ioff();show();clf()

        # plot kappa
        ion(); subplot(111)
        print('Rbin = ',Rbin,' Rscale')
        print('p_kappa = ',p_kappa)
        print('p_ekappa = ',p_ekappa)
        plot(Rbin,p_kappa,'b',lw=1)
        fill_between(Rbin,p_kappa-p_ekappa,p_kappa+p_ekappa,alpha=0.5,color='r') #[rscale],2*[1]
        xlabel(r'$R [\mathrm{Rscale}]$')
        ylabel(r'$\langle\kappa_{\mathrm{LOS}}\rangle [1]$')
        ylim([0,5])
        xlim([0,3])
        savefig(gpr.get_kurtosis_png(comp))
        ioff();show();clf()
예제 #5
0
def run():
    # get radius, used for all binning
    print('input:')
    print(gpr.get_com_file(0))
    if gfile.bufcount(gpr.get_com_file(0))<2: return
    x,y,vlos = np.loadtxt(gpr.get_com_file(0), skiprows=1, unpack=True) #2*[rscale], [km/s]
    totmass = 1.*len(x)  # [munit], [Msun], where each star is weighted with the same mass
    r = np.sqrt(x*x+y*y) # [rscale]
    
    #set binning
    #gpr.nbins = (max - min)*N^(1/3)/(2*(Q3-Q1)) #(method of wand)
    rmin = 0.                                       # [rscale]
    rmax = max(r) if gpr.rprior<0 else 1.0*gpr.rprior # [rscale]
    
    if gp.lograd:
        # space logarithmically in radius
        binmin, binmax, rbin = bin_r_log(rmax/gpr.nbins, rmax, gpr.nbins)
    elif gp.consttr:
        binmin, binmax, rbin = bin_r_const_tracers(r, len(r)/gpr.nbins)
    else:
        binmin, binmax, rbin = bin_r_linear(rmin, rmax, gpr.nbins)
        
    # offset from the start!
    rs = gpr.rerror*np.random.randn(len(r))+r #[rscale]
    vlos = gpr.vrerror*np.random.randn(len(vlos))+vlos #[km/s]
    print('output: ',gpr.get_siglos_file(0))
    vfil = open(gpr.get_siglos_file(0),'w')
    print('r','sigma_r(r)','error', file=vfil)

    # 30 iterations for drawing a given radius in bin
    dispvelocity = np.zeros((gpr.nbins,gpr.n))
    a = np.zeros((gpr.nbins,gpr.n))
    p_dvlos = np.zeros(gpr.nbins)
    p_edvlos = np.zeros(gpr.nbins)
    
    for k in range(gpr.n):
        rsi = gpr.rerror*np.random.randn(len(rs))+rs #[rscale]
        vlosi = gpr.vrerror*np.random.randn(len(vlos))+vlos #[km/s]
        for i in range(gpr.nbins):
            ind1 = np.argwhere(np.logical_and(rsi>binmin[i],rsi<binmax[i])).flatten()
            a[i][k] = len(ind1) #[1]
            vlos1 = vlosi[ind1] #[km/s]
            if(len(ind1)<=1):
                dispvelocity[i][k] = dispvelocity[i-1][k]
                # attention! should be 0, uses last value
            else:
                dispvelocity[i][k] = meanbiweight(vlos1,ci_perc=68.4,\
                                                  ci_mean=True,ci_std=True)[1]
                # [km/s], see BiWeight.py
                
    for i in range(gpr.nbins):
        dispvel = np.sum(dispvelocity[i])/gpr.n #[km/s]
        ab = np.sum(a[i])/(1.*gpr.n) #[1]
        if ab == 0:
            dispvelerror = p_edvlos[i-1] #[km/s]
            # attention! uses last error
        else:
            dispvelerror = dispvel/np.sqrt(ab) #[km/s]
        p_dvlos[i] = dispvel      #[km/s]
        p_edvlos[i]= dispvelerror #[km/s]

    maxvlos = max(p_dvlos) #[km/s]
    print('maxvlos = ',maxvlos,'[km/s]')
    fpars = open(gpr.get_params_file(0),'a')
    print(maxvlos, file=fpars)          #[km/s]
    fpars.close()
    import shutil
    shutil.copy2(gpr.get_params_file(0), gpr.get_params_file(1))


    for i in range(gpr.nbins):
        #             [rscale]  [maxvlos]                  [maxvlos]
        print(rbin[i], np.abs(p_dvlos[i]/maxvlos),np.abs(p_edvlos[i]/maxvlos), file=vfil) #/np.sqrt(n))
    vfil.close()

    if not gpr.showplots: return

    ion(); subplot(111)
    print('rbin = ',rbin,' rscale')
    print('p_dvlos = ',p_dvlos,' km/s')
    print('p_edvlos = ',p_edvlos, 'km/s')
    plot(rbin,p_dvlos,'b',linewidth=3)
    fill_between(rbin,p_dvlos-p_edvlos,p_dvlos+p_edvlos,alpha=0.5,color='r') #[rscale],[km/s],[km/s]

    xlabel(r'$r [rscale]$')
    ylabel(r'$\langle\sigma_{LOS}\rangle [km/s]$')
    ylim([-5,30])
    # xscale('log')
    xlim([np.min(rbin),np.max(rbin)])
    #plt.legend(['\rho','\rho'],'lower left'); #title(dwarf)
    savefig(gpr.get_siglos_png(0))
    if gpr.showplots:
        ioff();show();clf()