def _create_dac_gain_helper(self, vbox, i_or_q):
d = {"1/1": 0xC0, "1/2": 0x40, "1/11": 0x00}
def doit(kv):
dac_gain = kv['dac_gain']
coarse_s = kv['coarse']
print "dac_gain[%d] = %4d" % (i_or_q, dac_gain)
print "coarse = ", coarse_s
return self._set_dac_fine_gain(i_or_q, dac_gain, d[coarse_s])
myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
vbox.Add(hbox, 0, wx.EXPAND)
myform['coarse'] = form.radiobox_field(
parent=self.panel,
sizer=hbox,
callback=myform.check_input_and_call(doit),
choices=['1/11', '1/2', '1/1'],
weight=1,
value='1/1')
myform['dac_gain'] = form.slider_field(
parent=self.panel,
sizer=hbox,
callback=myform.check_input_and_call(doit),
min=-32,
max=31,
value=0,
weight=4)
def _build_gui(self, vbox):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
vbox.Add(self.scope.win, 1, wx.EXPAND) # Proportion used to be 10
# add control area at the bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL) # Create row sizer
hbox.Add((5,0), 0, 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Center freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
myform['antenna'] = form.radiobox_field(parent=self.panel, sizer=hbox, label="Antenna",
value=None, callback=self.set_antenna_callback,
choices=["TX/RX", "RX2", "RXA", "RXB", "RXAB"],major_dimension=5, weight=3)
hbox.Add((5,0), 0, 0)
g = self.subdev.gain_range()
myform['gain'] = form.slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=6, # 3
min=int(g[0]), max=int(g[1]),
callback=self.set_gain)
hbox.Add((5,0), 0, 0)
vbox.Add(hbox, 0, wx.EXPAND)
self._build_subpanel(vbox)
def _create_dac_gain_helper(self, vbox, i_or_q):
d = { "1/1" : 0xC0,
"1/2" : 0x40,
"1/11" : 0x00 }
def doit(kv):
dac_gain = kv['dac_gain']
coarse_s = kv['coarse']
print "dac_gain[%d] = %4d" % (i_or_q, dac_gain)
print "coarse = ", coarse_s
return self._set_dac_fine_gain(i_or_q, dac_gain, d[coarse_s])
myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
vbox.Add(hbox, 0, wx.EXPAND)
myform['coarse'] = form.radiobox_field(parent=self.panel, sizer=hbox,
callback=myform.check_input_and_call(doit),
choices=['1/11', '1/2', '1/1'],
weight=1, value='1/1')
myform['dac_gain'] = form.slider_field(parent=self.panel, sizer=hbox,
callback=myform.check_input_and_call(doit),
min=-32, max=31, value=0,
weight=4)
def build_gui(self):
self.myform = myform = form.form()
# Baseband controls
bb_sbox = wx.StaticBox(parent=self.panel, label="Baseband Modulation")
bb_vbox = wx.StaticBoxSizer(
bb_sbox, wx.VERTICAL) # Holds all baseband controls as unit
# First row of baseband controls (modulation type)
mod_hbox = wx.BoxSizer(wx.HORIZONTAL)
mod_hbox.Add((10, 0), 0, 0)
myform['type'] = form.radiobox_field(
parent=self.panel,
label="Type",
sizer=mod_hbox,
value=None,
callback=self.evt_set_waveform_type,
weight=1,
major_dimension=0,
choices=usrp2_siggen.waveforms.values())
bb_vbox.Add((0, 10), 0, 0)
bb_vbox.Add(mod_hbox, 0, wx.EXPAND)
# Second row of baseband controls (frequencies)
bbf_hbox = wx.BoxSizer(wx.HORIZONTAL)
bbf_hbox.Add((10, 0), 0, 0)
myform['w1freq'] = form.float_field(
parent=self.panel,
sizer=bbf_hbox,
label="Frequency 1 (Hz)",
weight=1,
callback=myform.check_input_and_call(self.evt_set_freq1,
self.evt_set_status_msg))
bbf_hbox.Add((10, 0), 0, 0)
myform['w2freq'] = form.float_field(
parent=self.panel,
sizer=bbf_hbox,
label="Frequency 2 (Hz)",
weight=1,
callback=myform.check_input_and_call(self.evt_set_freq2,
self.evt_set_status_msg))
bbf_hbox.Add((10, 0), 0, 0)
bb_vbox.Add((0, 10), 0, 0)
bb_vbox.Add(bbf_hbox, 0, wx.EXPAND)
# Add baseband controls to top window sizer
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(bb_vbox, 0, wx.EXPAND)
# Frequency controls
fc_sbox = wx.StaticBox(parent=self.panel, label="Center Frequency")
fc_vbox = wx.StaticBoxSizer(
fc_sbox, wx.VERTICAL) # Holds all frequency controls as unit
# First row of frequency controls (center frequency)
freq_hbox = wx.BoxSizer(wx.HORIZONTAL)
freq_hbox.Add((10, 0), 0, 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=freq_hbox,
label=None,
weight=1,
callback=myform.check_input_and_call(
self.evt_set_freq,
self.evt_set_status_msg))
freq_hbox.Add((10, 0), 0, 0)
myform['freq_slider'] = form.quantized_slider_field(
parent=self.panel,
sizer=freq_hbox,
label="Min-Max",
weight=4,
range=(self.min_freq, self.max_freq, self.freq_step),
callback=self.evt_set_freq)
freq_hbox.Add((10, 0), 0, 0)
fc_vbox.Add((10, 0), 0, 0)
fc_vbox.Add(freq_hbox, 0, wx.EXPAND)
# Second row of frequency controls (results)
tr_hbox = wx.BoxSizer(wx.HORIZONTAL)
tr_hbox.Add((10, 0), 0, 0)
myform['analog'] = form.static_float_field(parent=self.panel,
sizer=tr_hbox,
label="Daughterboard: (Hz)",
weight=1)
tr_hbox.Add((10, 0), 0, 0)
myform['DDC'] = form.static_float_field(parent=self.panel,
sizer=tr_hbox,
label="USRP2 DDC (Hz)",
weight=1)
tr_hbox.Add((10, 0), 0, 0)
fc_vbox.Add(tr_hbox, 0, wx.EXPAND)
# Add frequency controls to top window sizer
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(fc_vbox, 0, wx.EXPAND)
# Amplitude row
amp_sbox = wx.StaticBox(parent=self.panel, label="Amplitude")
amp_hbox = wx.StaticBoxSizer(amp_sbox, wx.HORIZONTAL)
amp_hbox.Add((10, 0), 0, 0)
myform['amp'] = form.float_field(parent=self.panel,
sizer=amp_hbox,
label="Linear\n(0.0-1.0)",
weight=1,
callback=myform.check_input_and_call(
self.evt_set_amplitude,
self.evt_set_status_msg))
amp_hbox.Add((10, 0), 0, 0)
myform['amp_slider'] = form.quantized_slider_field(
parent=self.panel,
sizer=amp_hbox,
label="dB Full Scale\n(-100-0)",
weight=4,
range=(-100.0, 0.0, 1),
callback=self.evt_set_amplitude)
amp_hbox.Add((10, 0), 0, 0)
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(amp_hbox, 0, wx.EXPAND)
# Sample rate row
sam_sbox = wx.StaticBox(parent=self.panel, label="Sample Rate")
sam_hbox = wx.StaticBoxSizer(sam_sbox, wx.HORIZONTAL)
sam_hbox.Add((10, 0), 0, 0)
myform['interp'] = form.int_field(parent=self.panel,
sizer=sam_hbox,
label="Interpolation",
weight=1,
callback=self.evt_set_interp)
sam_hbox.Add((10, 0), 0, 0)
myform['eth'] = form.static_float_field(parent=self.panel,
sizer=sam_hbox,
label="Sample Rate (sps)",
weight=1)
sam_hbox.Add((10, 0), 0, 0)
myform['gbe'] = form.static_float_field(parent=self.panel,
sizer=sam_hbox,
label="GbE Rate (bits/sec)",
weight=1)
sam_hbox.Add((10, 0), 0, 0)
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(sam_hbox, 0, wx.EXPAND)
# USRP2 row
u2_sbox = wx.StaticBox(parent=self.panel, label="USRP2 Hardware")
u2_hbox = wx.StaticBoxSizer(u2_sbox, wx.HORIZONTAL)
u2_hbox.Add((10, 0), 0, 0)
myform['ifc'] = form.static_text_field(parent=self.panel,
sizer=u2_hbox,
label="Interface",
weight=2)
u2_hbox.Add((10, 0), 0, 0)
myform['mac'] = form.static_text_field(parent=self.panel,
sizer=u2_hbox,
label="MAC Address",
weight=2)
u2_hbox.Add((10, 0), 0, 0)
myform['dbid'] = form.static_text_field(parent=self.panel,
sizer=u2_hbox,
label="Daughterboard ID",
weight=1)
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(u2_hbox, 0, wx.EXPAND)
self.vbox.Add((0, 20), 0, 0)
def build_gui(self):
self.myform = myform = form.form()
# Baseband controls
bb_sbox = wx.StaticBox(parent=self.panel, label="Baseband Modulation")
bb_vbox = wx.StaticBoxSizer(bb_sbox, wx.VERTICAL) # Holds all baseband controls as unit
# First row of baseband controls (modulation type)
mod_hbox = wx.BoxSizer(wx.HORIZONTAL)
mod_hbox.Add((10,0), 0, 0)
myform['type'] = form.radiobox_field(
parent=self.panel, label="Type", sizer=mod_hbox, value=None,
callback=self.evt_set_waveform_type, weight=1, major_dimension=0,
choices=usrp2_siggen.waveforms.values() )
bb_vbox.Add((0,10), 0, 0)
bb_vbox.Add(mod_hbox, 0, wx.EXPAND)
# Second row of baseband controls (frequencies)
bbf_hbox = wx.BoxSizer(wx.HORIZONTAL)
bbf_hbox.Add((10,0), 0, 0)
myform['w1freq'] = form.float_field(
parent=self.panel, sizer=bbf_hbox, label="Frequency 1 (Hz)", weight=1,
callback=myform.check_input_and_call(self.evt_set_freq1, self.evt_set_status_msg) )
bbf_hbox.Add((10,0), 0, 0)
myform['w2freq'] = form.float_field(
parent=self.panel, sizer=bbf_hbox, label="Frequency 2 (Hz)", weight=1,
callback=myform.check_input_and_call(self.evt_set_freq2, self.evt_set_status_msg) )
bbf_hbox.Add((10,0), 0, 0)
bb_vbox.Add((0,10), 0, 0)
bb_vbox.Add(bbf_hbox, 0, wx.EXPAND)
# Add baseband controls to top window sizer
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(bb_vbox, 0, wx.EXPAND)
# Frequency controls
fc_sbox = wx.StaticBox(parent=self.panel, label="Center Frequency")
fc_vbox = wx.StaticBoxSizer(fc_sbox, wx.VERTICAL) # Holds all frequency controls as unit
# First row of frequency controls (center frequency)
freq_hbox = wx.BoxSizer(wx.HORIZONTAL)
freq_hbox.Add((10,0), 0, 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=freq_hbox, label=None, weight=1,
callback=myform.check_input_and_call(self.evt_set_freq, self.evt_set_status_msg) )
freq_hbox.Add((10,0), 0, 0)
myform['freq_slider'] = form.quantized_slider_field(
parent=self.panel, sizer=freq_hbox, label="Min-Max", weight=4,
range = (self.min_freq, self.max_freq, self.freq_step),
callback=self.evt_set_freq)
freq_hbox.Add((10,0), 0, 0)
fc_vbox.Add((10,0), 0, 0)
fc_vbox.Add(freq_hbox, 0, wx.EXPAND)
# Second row of frequency controls (results)
tr_hbox = wx.BoxSizer(wx.HORIZONTAL)
tr_hbox.Add((10,0), 0, 0)
myform['analog'] = form.static_float_field(
parent=self.panel, sizer=tr_hbox, label="Daughterboard: (Hz)", weight=1)
tr_hbox.Add((10,0), 0, 0)
myform['DDC'] = form.static_float_field(
parent=self.panel, sizer=tr_hbox, label="USRP2 DDC (Hz)", weight=1)
tr_hbox.Add((10,0), 0, 0)
fc_vbox.Add(tr_hbox, 0, wx.EXPAND)
# Add frequency controls to top window sizer
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(fc_vbox, 0, wx.EXPAND)
# Amplitude row
amp_sbox = wx.StaticBox(parent=self.panel, label="Amplitude")
amp_hbox = wx.StaticBoxSizer(amp_sbox, wx.HORIZONTAL)
amp_hbox.Add((10,0), 0, 0)
myform['amp'] = form.float_field(
parent=self.panel, sizer=amp_hbox, label="Linear\n(0.0-1.0)", weight=1,
callback=myform.check_input_and_call(self.evt_set_amplitude, self.evt_set_status_msg) )
amp_hbox.Add((10,0), 0, 0)
myform['amp_slider'] = form.quantized_slider_field(
parent=self.panel, sizer=amp_hbox, label="dB Full Scale\n(-100-0)", weight=4,
range=(-100.0, 0.0, 1), callback=self.evt_set_amplitude)
amp_hbox.Add((10,0), 0, 0)
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(amp_hbox, 0, wx.EXPAND)
# Sample rate row
sam_sbox = wx.StaticBox(parent=self.panel, label="Sample Rate")
sam_hbox = wx.StaticBoxSizer(sam_sbox, wx.HORIZONTAL)
sam_hbox.Add((10,0), 0, 0)
myform['interp'] = form.int_field(
parent=self.panel, sizer=sam_hbox, label="Interpolation", weight=1,
callback=self.evt_set_interp)
sam_hbox.Add((10,0), 0, 0)
myform['eth'] = form.static_float_field(
parent=self.panel, sizer=sam_hbox, label="Sample Rate (sps)", weight=1)
sam_hbox.Add((10,0), 0, 0)
myform['gbe'] = form.static_float_field(
parent=self.panel, sizer=sam_hbox, label="GbE Rate (bits/sec)", weight=1)
sam_hbox.Add((10,0), 0, 0)
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(sam_hbox, 0, wx.EXPAND)
# USRP2 row
u2_sbox = wx.StaticBox(parent=self.panel, label="USRP2 Hardware")
u2_hbox = wx.StaticBoxSizer(u2_sbox, wx.HORIZONTAL)
u2_hbox.Add((10,0), 0, 0)
myform['ifc'] = form.static_text_field(parent=self.panel, sizer=u2_hbox,
label="Interface", weight=2)
u2_hbox.Add((10,0), 0, 0)
myform['mac'] = form.static_text_field(parent=self.panel, sizer=u2_hbox,
label="MAC Address", weight=2)
u2_hbox.Add((10,0), 0, 0)
myform['dbid'] = form.static_text_field(parent=self.panel, sizer=u2_hbox,
label="Daughterboard ID", weight=1)
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(u2_hbox, 0, wx.EXPAND)
self.vbox.Add((0,20), 0, 0)
def make_control(self):
bspace = 10
PyHydra.control.make_control(self)
self.AddLocalMacAddress()
""" Create MCS choicebox_field """
box = wx.BoxSizer(wx.HORIZONTAL)
self.make_label("MCS", box, 35)
self.mcsfield = PyHydra.choicebox_field(self, box, \
value="Auto", callback = self.SetMCS, \
choices = MimoControl.MCS_CHOICES)
self.mcsfield.f.SetToolTipString("Select Modulation and Coding Scheme")
self.AddParam('rate', self.SetMCS)
self.AddParam('mcs', self.SetMCS)
if self.options.rate<0: self.SetParam('mcs', "Auto")
else: self.SetParam('mcs', self.options.rate)
self.cbox.Add (box, 0, wx.ALIGN_LEFT|wx.ALL, border = bspace)
## Create divider
divider = PyHydra.Divider(self)
divider.SetBackgroundColour(wx.Colour(200,200,200) )
self.cbox.AddSpacer((10,10))
self.cbox.Add(divider, 0, wx.EXPAND|wx.GROW)
self.cbox.AddSpacer((10,10))
""" Packet Detector Threshold """
box = wx.BoxSizer(wx.VERTICAL)
self.pd_threshold = form.slider_field(self, box, \
"Packet Detector Threshold (%)", value=self.options.pd_threshold,
callback=self.SetPacketDetectorThreshold, min=20, max=100)
self.AddParam('pd_threshold', self.SetPacketDetectorThreshold)
self.SetParam('pd_threshold', self.options.pd_threshold)
self.cbox.Add(box, 0, wx.ALIGN_LEFT|wx.ALL, border=bspace)
""" Enable Beamforming """
box = wx.BoxSizer(wx.HORIZONTAL)
self.make_label("Enable Beamforming: ", box, 20)
self.enable_beamforming = form.radiobox_field(self, box, label="", \
value = MimoControl.ENABLE_CHOICES[self.options.enable_beamforming], \
callback=self.SetEnableBeamforming, \
choices = MimoControl.ENABLE_CHOICES, major_dimension=0)
#box.Hide(1, recursive=True), box.Remove(1) # Remove default form label
self.enable_beamforming.f.SetLabel("")
self.AddParam('enable_beamforming', self.SetEnableBeamforming)
self.SetParam('enable_beamforming', self.options.enable_beamforming)
self.cbox.Add(box, 0, wx.ALIGN_LEFT|wx.ALL, border=bspace)
""" MAC Monitor Address """
vbox = wx.BoxSizer(wx.VERTICAL)
self.monitor = MimoControl.BROADCAST_ADDR
f = form.static_text_field(self, vbox, value="Monitoring MAC Address: ")
vbox.AddSpacer((10,10) )
box = wx.BoxSizer(wx.HORIZONTAL)
self.fmonitor = form.text_field(self, box, \
value="FF:"*(mimo.mac_monitor.MAC_ADDR_SIZE-1)+"FF", \
callback=self.SetMonitor, weight=1)
self.AddParam('mac_monitor', self.SetMonitor)
box.AddSpacer((10,10) )
self.enable_monitor = form.checkbox_field(self, box, "monitor?", \
value=False, callback=self.SetEnableMonitor, \
weight=0)
box.AddSpacer((100,10) )
vbox.Add(box, 0, wx.EXPAND)
self.cbox.Add(vbox, 1, wx.EXPAND|wx.ALIGN_LEFT|wx.ALL, border=bspace)
self.Fit()
