def envelope ():
# draw stacked layers using same location and scale
g.setoption("stacklayers", 1)
g.show("Hit escape key to stop script...")
while True:
g.run(1)
if g.empty():
g.show("Pattern died out.")
break
# copy current pattern to envelope layer;
# we temporarily disable event checking so thumb scrolling
# and other mouse events won't cause confusing changes
currpatt = g.getcells(g.getrect())
g.check(0)
g.setlayer(envindex)
g.putcells(currpatt)
g.setlayer(currindex)
g.check(1)
step = 1
exp = g.getstep()
if exp > 0:
step = g.getbase()**exp
if int(g.getgen()) % step == 0:
# display all 3 layers (envelope, start, current)
g.update()
def envelope():
# draw stacked layers using same location and scale
g.setoption("stacklayers", 1)
g.show("Hit escape key to stop script...")
while True:
g.run(1)
if g.empty():
g.show("Pattern died out.")
break
# copy current pattern to envelope layer;
# we temporarily disable event checking so thumb scrolling
# and other mouse events won't cause confusing changes
currpatt = g.getcells(g.getrect())
g.check(0)
g.setlayer(envindex)
g.putcells(currpatt)
g.setlayer(currindex)
g.check(1)
step = 1
exp = g.getstep()
if exp > 0:
step = g.getbase()**exp
if int(g.getgen()) % step == 0:
# display all 3 layers (envelope, start, current)
g.update()
def burp():
test_signal=pattern("""
40bo$41bo$39b3o17$40bo4bo4bo4bo4bo$41bo4bo4bo4bo4bo$39b3o2b3o2b3o2b3o
2b3o3$40bo4bo4bo4bo4bo$41bo4bo4bo4bo4bo$39b3o2b3o2b3o2b3o2b3o3$40bo4bo
4bo4bo4bo$41bo4bo4bo4bo4bo$39b3o2b3o2b3o2b3o2b3o3$40bo4bo4bo4bo4bo$41b
o4bo4bo4bo4bo$39b3o2b3o2b3o2b3o2b3o3$bo38bo4bo4bo4bo4bo18bo$2bo38bo4bo
4bo4bo4bo18bo$3o36b3o2b3o2b3o2b3o2b3o16b3o37$40bo$41bo$39b3o!""")
prepare_burp()
ticks=0
tickstep=5
last_signal=-99999
viewport_speed=16
sel_speed=0.0
delta_sel=0.0
delay=-1.0
run_flag=False
ch=""
selx=600.0
sely=365.0
place_signal=3
helpstring="""Use ENTER and SPACE to run or halt the pattern;
use + and - to change the step size or delay value;
use arrow keys and mouse tools to pan and zoom in any pane;
T toggles between a tiled view and a single-pane view;
S creates another signal fleet near the detection mechanism;
R resets the Heisenburp device to its initial state;
Q quits out of the script and restores original settings."""
instr="Press H for help. "
g.show(instr + str(tickstep))
g.select([selx,sely,50,50])
# keyboard handling
while ch<>"q":
if place_signal>0:
if ticks-last_signal>1846:
test_signal.put(-150,60)
last_signal=ticks
place_signal-=1
if place_signal>0 and run_flag==True:
show_status_text("Next signal placement in " \
+ str(1847 - ticks + last_signal) + " ticks. " + instr, delay, tickstep)
else:
show_status_text(instr,delay,tickstep)
event = g.getevent()
if event.startswith("key"):
evt, ch, mods = event.split()
else:
ch = ""
if ch=="r":
prepare_burp()
ticks=0
last_signal=-99999
viewport_speed=16
sel_speed=0
run_flag=False
selx=600.0
sely=365.0
place_signal=3
g.select([selx,sely,50,50])
elif ch=="h":
g.note(helpstring)
elif ch=="t":
g.setoption("tilelayers",1-g.getoption("tilelayers"))
elif ch=="=" or ch=="+":
if delay>.01:
delay/=2
elif delay==.01:
delay=-1
else:
if tickstep==1:
tickstep=3
elif tickstep<250:
tickstep=(tickstep-1)*2+1
elif ch=="-" or ch=="_":
if delay==-1:
if tickstep==1:
delay=.01
else:
if tickstep==3:
tickstep=1
else:
tickstep=(tickstep-1)/2+1
else:
if delay<1:
delay*=2
elif ch=="space":
run_flag=False
elif ch=="return":
run_flag=not run_flag
elif ch=="s":
place_signal+=1
else:
# just pass any other keyboard/mouse event through to Golly
g.doevent(event)
# generation and selection speed handling
if ch=="space" or run_flag==True:
g.run(tickstep)
currlayer = g.getlayer()
if currlayer != 4:
# user has switched layer so temporarily change it back
# so we only change location of bottom right layer
g.check(False)
g.setlayer(4)
x, y = getposint()
oldticks=ticks
ticks+=tickstep
delta_view=int(ticks/viewport_speed) - int(oldticks/viewport_speed)
if delta_view <> 0: # assumes diagonal motion for now
setposint(x + delta_view, y + delta_view)
sel = g.getselrect()
if len(sel)<>0:
x, y, w, h = sel
if int(selx)<>x: # user changed selection
# prepare to move new selection instead (!?!)
# -- use floating-point selx, sely to account for fractional speeds
selx=x
sely=y
else:
selx+=sel_speed*tickstep
sely+=sel_speed*tickstep
g.select([selx, sely, w, h])
else:
g.select([selx, sely, 50, 50])
if currlayer != 4:
g.setlayer(currlayer)
g.check(True)
# change viewport speed at appropriate times to follow the action
if oldticks<4570 and ticks>=4570:
sel_speed=.666667
# one-time correction to catch up with the signal at high sim speeds
g.select([600+(ticks-4570)*1.5, 365+(ticks-4570)*1.5, w, h])
if selx>2125:
sel_speed=0
g.select([2125, sely+2125-selx, w, h])
if oldticks<4750 and ticks>=4750: viewport_speed=1.5
if oldticks<6125 and ticks>=6125: viewport_speed=16
if oldticks>=11995: viewport_speed=99999.9
# stop automatically after the last signal passes through the device
if oldticks - last_signal<8705 and ticks - last_signal>=8705:
run_flag=False
if run_flag==True and delay>0:
sleep(delay)
g.update()
def burp():
test_signal=pattern("""
40bo$41bo$39b3o17$40bo4bo4bo4bo4bo$41bo4bo4bo4bo4bo$39b3o2b3o2b3o2b3o
2b3o3$40bo4bo4bo4bo4bo$41bo4bo4bo4bo4bo$39b3o2b3o2b3o2b3o2b3o3$40bo4bo
4bo4bo4bo$41bo4bo4bo4bo4bo$39b3o2b3o2b3o2b3o2b3o3$40bo4bo4bo4bo4bo$41b
o4bo4bo4bo4bo$39b3o2b3o2b3o2b3o2b3o3$bo38bo4bo4bo4bo4bo18bo$2bo38bo4bo
4bo4bo4bo18bo$3o36b3o2b3o2b3o2b3o2b3o16b3o37$40bo$41bo$39b3o!""")
prepare_burp()
ticks=0
tickstep=5
last_signal=-99999
viewport_speed=16
sel_speed=0.0
delta_sel=0.0
delay=-1.0
run_flag=False
ch=""
selx=600.0
sely=365.0
place_signal=3
helpstring="""Use ENTER and SPACE to run or halt the pattern;
use + and - to change the step size or delay value;
use arrow keys and mouse tools to pan and zoom in any pane;
T toggles between a tiled view and a single-pane view;
S creates another signal fleet near the detection mechanism;
R resets the Heisenburp device to its initial state;
Q quits out of the script and restores original settings."""
instr="Press H for help. "
g.show(instr + str(tickstep))
g.select([selx,sely,50,50])
# keyboard handling
while ch<>"q":
if place_signal>0:
if ticks-last_signal>1846:
test_signal.put(-150,60)
last_signal=ticks
place_signal-=1
if place_signal>0 and run_flag==True:
show_status_text("Next signal placement in " \
+ str(1847 - ticks + last_signal) + " ticks. " + instr, delay, tickstep)
else:
show_status_text(instr,delay,tickstep)
event = g.getevent()
if event.startswith("key"):
evt, ch, mods = event.split()
else:
ch = ""
if ch=="r":
prepare_burp()
ticks=0
last_signal=-99999
viewport_speed=16
sel_speed=0
run_flag=False
selx=600.0
sely=365.0
place_signal=3
g.select([selx,sely,50,50])
elif ch=="h":
g.note(helpstring)
elif ch=="t":
g.setoption("tilelayers",1-g.getoption("tilelayers"))
elif ch=="=" or ch=="+":
if delay>.01:
delay/=2
elif delay==.01:
delay=-1
else:
if tickstep==1:
tickstep=3
elif tickstep<250:
tickstep=(tickstep-1)*2+1
elif ch=="-" or ch=="_":
if delay==-1:
if tickstep==1:
delay=.01
else:
if tickstep==3:
tickstep=1
else:
tickstep=(tickstep-1)/2+1
else:
if delay<1:
delay*=2
elif ch=="space":
run_flag=False
elif ch=="return":
run_flag=not run_flag
elif ch=="s":
place_signal+=1
else:
# just pass any other keyboard/mouse event through to Golly
g.doevent(event)
# generation and selection speed handling
if ch=="space" or run_flag==True:
g.run(tickstep)
currlayer = g.getlayer()
if currlayer != 4:
# user has switched layer so temporarily change it back
# so we only change location of bottom right layer
g.check(False)
g.setlayer(4)
x, y = getposint()
oldticks=ticks
ticks+=tickstep
delta_view=int(ticks/viewport_speed) - int(oldticks/viewport_speed)
if delta_view <> 0: # assumes diagonal motion for now
setposint(x + delta_view, y + delta_view)
sel = g.getselrect()
if len(sel)<>0:
x, y, w, h = sel
if int(selx)<>x: # user changed selection
# prepare to move new selection instead (!?!)
# -- use floating-point selx, sely to account for fractional speeds
selx=x
sely=y
else:
selx+=sel_speed*tickstep
sely+=sel_speed*tickstep
g.select([selx, sely, w, h])
else:
g.select([selx, sely, 50, 50])
if currlayer != 4:
g.setlayer(currlayer)
g.check(True)
# change viewport speed at appropriate times to follow the action
if oldticks<4570 and ticks>=4570:
sel_speed=.666667
# one-time correction to catch up with the signal at high sim speeds
g.select([600+(ticks-4570)*1.5, 365+(ticks-4570)*1.5, w, h])
if selx>2125:
sel_speed=0
g.select([2125, sely+2125-selx, w, h])
if oldticks<4750 and ticks>=4750: viewport_speed=1.5
if oldticks<6125 and ticks>=6125: viewport_speed=16
if oldticks>=11995: viewport_speed=99999.9
# stop automatically after the last signal passes through the device
if oldticks - last_signal<8705 and ticks - last_signal>=8705:
run_flag=False
if run_flag==True and delay>0:
sleep(delay)
g.update()
def main ():
g.update ()
g.check (False)
path = g.getstring ("Output directory:")
files = glob.glob (os.path.join (path, "*.out"))
mingls = g.getstring ("Min number of gliders at accept:")
if mingls == "":
mingl = 0
minpop = 0
maxpop = 1024
else:
mingl = int (mingls)
minpops = g.getstring ("Min population except catalyzers:")
if minpops == "":
minpop = 0
maxpop = 1024
else:
minpop = int (minpops)
maxpop = int (g.getstring ("Max population except catalyzers:"))
if g.getname () != "catbellman_temp":
g.addlayer ()
hashdir = {}
catlist = []
catix = 0
g.new ("catbellman_temp")
g.setrule ("LifeBellman")
for fix, filename in enumerate (files):
patt = g.getrect ()
if patt != []:
g.select (patt)
g.clear (0)
g.setgen ("0")
with open(filename, 'r') as f:
filetext = f.read ()
if fix % 16 == 0:
g.show ("Analysing " + str (fix) + "/" + str (len (files)))
(gogen, glcnt) = convbellman (filetext, 0, 0)
if gogen == -1:
gogen = 128
(use, hash) = analyse (gogen, glcnt, minpop, maxpop, mingl)
if use:
if not hash in hashdir:
catlist.append ([])
hashdir [hash] = catix
catix += 1
cat = hashdir [hash]
catlist [cat].append (filetext)
g.new ("catbellman_temp")
g.setrule ("LifeBellman")
fix = 0
y = 0
for cat in catlist:
x = 96 * (len (cat) - 1)
for filetext in cat:
convbellman (filetext, x, y)
x -= 96
fix += 1
if fix % 32 == 0:
g.show ("Rendering " + str (fix) + "/" + str (len (files)))
g.fit ()
g.check (True)
g.update ()
g.check (False)
y += 96
g.show ("Done")
g.fit ()
g.setstep (-1)
g.check (True)