def WriteActions(self, actions, extra_sources, extra_outputs):
"""Write Makefile code for any 'actions' from the gyp input.
extra_sources: a list that will be filled in with newly generated source
files, if any
extra_outputs: a list that will be filled in with any outputs of these
actions (used to make other pieces dependent on these
actions)
"""
for action in actions:
name = make.StringToMakefileVariable(
'%s_%s' % (self.relative_target, action['action_name']))
self.WriteLn('### Rules for action "%s":' % action['action_name'])
inputs = action['inputs']
outputs = action['outputs']
# Build up a list of outputs.
# Collect the output dirs we'll need.
dirs = set()
for out in outputs:
if not out.startswith('$'):
print(
'WARNING: Action for target "%s" writes output to local path '
'"%s".' % (self.target, out))
dir = os.path.split(out)[0]
if dir:
dirs.add(dir)
if int(action.get('process_outputs_as_sources', False)):
extra_sources += outputs
# Prepare the actual command.
command = gyp.common.EncodePOSIXShellList(action['action'])
if 'message' in action:
quiet_cmd = 'Gyp action: %s ($@)' % action['message']
else:
quiet_cmd = 'Gyp action: %s ($@)' % name
if len(dirs) > 0:
command = 'mkdir -p %s' % ' '.join(dirs) + '; ' + command
cd_action = 'cd $(gyp_local_path)/%s; ' % self.path
command = cd_action + command
# The makefile rules are all relative to the top dir, but the gyp actions
# are defined relative to their containing dir. This replaces the gyp_*
# variables for the action rule with an absolute version so that the
# output goes in the right place.
# Only write the gyp_* rules for the "primary" output (:1);
# it's superfluous for the "extra outputs", and this avoids accidentally
# writing duplicate dummy rules for those outputs.
main_output = make.QuoteSpaces(self.LocalPathify(outputs[0]))
self.WriteLn('%s: gyp_local_path := $(LOCAL_PATH)' % main_output)
self.WriteLn('%s: gyp_intermediate_dir := '
'$(abspath $(gyp_intermediate_dir))' % main_output)
self.WriteLn('%s: gyp_shared_intermediate_dir := '
'$(abspath $(gyp_shared_intermediate_dir))' %
main_output)
# Android's envsetup.sh adds a number of directories to the path including
# the built host binary directory. This causes actions/rules invoked by
# gyp to sometimes use these instead of system versions, e.g. bison.
# The built host binaries may not be suitable, and can cause errors.
# So, we remove them from the PATH using the ANDROID_BUILD_PATHS variable
# set by envsetup.
self.WriteLn(
'%s: export PATH := $(subst $(ANDROID_BUILD_PATHS),,$(PATH))' %
main_output)
for input in inputs:
assert ' ' not in input, (
"Spaces in action input filenames not supported (%s)" %
input)
for output in outputs:
assert ' ' not in output, (
"Spaces in action output filenames not supported (%s)" %
output)
self.WriteLn(
'%s: %s $(GYP_TARGET_DEPENDENCIES)' %
(main_output, ' '.join(map(self.LocalPathify, inputs))))
self.WriteLn('\t@echo "%s"' % quiet_cmd)
self.WriteLn('\t$(hide)%s\n' % command)
for output in outputs[1:]:
# Make each output depend on the main output, with an empty command
# to force make to notice that the mtime has changed.
self.WriteLn('%s: %s ;' %
(self.LocalPathify(output), main_output))
extra_outputs += outputs
self.WriteLn()
self.WriteLn()
def WriteActions(self, actions, extra_sources, extra_outputs):
"""Write Makefile code for any 'actions' from the gyp input.
extra_sources: a list that will be filled in with newly generated source
files, if any
extra_outputs: a list that will be filled in with any outputs of these
actions (used to make other pieces dependent on these
actions)
"""
for action in actions:
name = make.StringToMakefileVariable(
"%s_%s" % (self.relative_target, action["action_name"])
)
self.WriteLn('### Rules for action "%s":' % action["action_name"])
inputs = action["inputs"]
outputs = action["outputs"]
# Build up a list of outputs.
# Collect the output dirs we'll need.
dirs = set()
for out in outputs:
if not out.startswith("$"):
print(
'WARNING: Action for target "%s" writes output to local path '
'"%s".' % (self.target, out)
)
dir = os.path.split(out)[0]
if dir:
dirs.add(dir)
if int(action.get("process_outputs_as_sources", False)):
extra_sources += outputs
# Prepare the actual command.
command = gyp.common.EncodePOSIXShellList(action["action"])
if "message" in action:
quiet_cmd = "Gyp action: %s ($@)" % action["message"]
else:
quiet_cmd = "Gyp action: %s ($@)" % name
if len(dirs) > 0:
command = "mkdir -p %s" % " ".join(dirs) + "; " + command
cd_action = "cd $(gyp_local_path)/%s; " % self.path
command = cd_action + command
# The makefile rules are all relative to the top dir, but the gyp actions
# are defined relative to their containing dir. This replaces the gyp_*
# variables for the action rule with an absolute version so that the
# output goes in the right place.
# Only write the gyp_* rules for the "primary" output (:1);
# it's superfluous for the "extra outputs", and this avoids accidentally
# writing duplicate dummy rules for those outputs.
main_output = make.QuoteSpaces(self.LocalPathify(outputs[0]))
self.WriteLn("%s: gyp_local_path := $(LOCAL_PATH)" % main_output)
self.WriteLn("%s: gyp_var_prefix := $(GYP_VAR_PREFIX)" % main_output)
self.WriteLn(
"%s: gyp_intermediate_dir := "
"$(abspath $(gyp_intermediate_dir))" % main_output
)
self.WriteLn(
"%s: gyp_shared_intermediate_dir := "
"$(abspath $(gyp_shared_intermediate_dir))" % main_output
)
# Android's envsetup.sh adds a number of directories to the path including
# the built host binary directory. This causes actions/rules invoked by
# gyp to sometimes use these instead of system versions, e.g. bison.
# The built host binaries may not be suitable, and can cause errors.
# So, we remove them from the PATH using the ANDROID_BUILD_PATHS variable
# set by envsetup.
self.WriteLn(
"%s: export PATH := $(subst $(ANDROID_BUILD_PATHS),,$(PATH))"
% main_output
)
# Don't allow spaces in input/output filenames, but make an exception for
# filenames which start with '$(' since it's okay for there to be spaces
# inside of make function/macro invocations.
for input in inputs:
if not input.startswith("$(") and " " in input:
raise gyp.common.GypError(
'Action input filename "%s" in target %s contains a space'
% (input, self.target)
)
for output in outputs:
if not output.startswith("$(") and " " in output:
raise gyp.common.GypError(
'Action output filename "%s" in target %s contains a space'
% (output, self.target)
)
self.WriteLn(
"%s: %s $(GYP_TARGET_DEPENDENCIES)"
% (main_output, " ".join(map(self.LocalPathify, inputs)))
)
self.WriteLn('\t@echo "%s"' % quiet_cmd)
self.WriteLn("\t$(hide)%s\n" % command)
for output in outputs[1:]:
# Make each output depend on the main output, with an empty command
# to force make to notice that the mtime has changed.
self.WriteLn("%s: %s ;" % (self.LocalPathify(output), main_output))
extra_outputs += outputs
self.WriteLn()
self.WriteLn()
