def forward_a(testname):
    hs = TESTS[testname].host_s
    hr = TESTS[testname].host_r
    r_mac = info.get("router_mac", hs)
    target_ip = info.get("host_ip", hr)

    return [Ether(dst=r_mac) / IP(dst=target_ip)]
예제 #2
0
    def run_test(self, testname):
        log = os.path.join(info.LOGDIR, testname)
        Path(log).mkdir(parents=True, exist_ok=True)

        test = tests.TESTS[testname]
        for hp in range(len(self.hosts)):
            lout = os.path.join(log, info.get("output_file", hp))
            lerr = os.path.join(log, info.get("error_file", hp))
            cmd = "checker/checker.py \
                    --passive \
                    --testname={} \
                    --host={} \
                    > {} \
                    2> {} &".format(testname, hp, lout, lerr)
            self.hosts[hp].cmd(cmd)

        time.sleep(info.TIMEOUT / 2)
        cmd = "checker/checker.py \
                --active \
                --testname={} \
                --host={} &".format(testname, test.host_s)
        self.hosts[test.host_s].cmd(cmd)

        results = {}
        time.sleep(info.TIMEOUT)
        for hp in range(len(self.hosts)):
            lout = os.path.join(log, info.get("output_file", hp))
            with open(lout, "r") as fin:
                results[hp] = fin.read().strip("\r\n")

        return results
예제 #3
0
    def setup_ifaces(self):
        for i in range(len(self.hosts)):
            host_ip = info.get("host_ip", i)
            router_ip = info.get("router_ip", i)

            self.router.setIP(router_ip, prefixLen=24, intf="r-{}".format(i))
            self.hosts[i].setIP(host_ip, prefixLen=24, intf="h-{}".format(i))
예제 #4
0
    def disable_unneeded(self):
        def disable_ipv6(host):
            host.cmd('sysctl -w net.ipv6.conf.all.disable_ipv6=1')
            host.cmd('sysctl -w net.ipv6.conf.default.disable_ipv6=1')

        def disable_nic_checksum(host, iface):
            host.cmd('ethtool iface {} --offload rx off tx off'.format(iface))
            host.cmd('ethtool -K {} tx-checksum-ip-generic off'.format(iface))

        def disable_arp(host, iface):
            host.cmd("ip link set dev {} arp off".format(iface))

        for i, (router, hosts) in enumerate(self.routers):
            disable_ipv6(router)
            for j, host in enumerate(hosts):
                disable_ipv6(host)
                hidx = i * len(hosts) + j
                h_if = info.get("host_if_name", hidx)
                disable_nic_checksum(host, h_if)

            # we want complete control over these actions
            router.cmd('echo "0" > /proc/sys/net/ipv4/ip_forward')
            router.cmd('echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_all')
            if not static_arp():
                for (i, (router, hosts)) in enumerate(self.routers):
                    for j in range(len(hosts)):
                        hidx = i * len(hosts) + j
                        ifn = info.get("router_if_name", hidx)
                        disable_arp(router, ifn)
def icmp_timeout_a(testname):
    hs = TESTS[testname].host_s
    hr = TESTS[testname].host_r
    r_mac = info.get("router_mac", hs)
    target_ip = info.get("host_ip", hr)

    return [Ether(dst=r_mac) / IP(dst=target_ip, ttl=1)]
    def run_test(self, testname):
        test = tests.TESTS[testname]
        for hp in test.hosts_p:
            h = self.net.get(info.get("host_name", hp))
            cmd = "python ./checker.py \
                    --passive \
                    --testname={} \
                    --host={}".format(testname, hp)
            self.hosts[hp].sendCmd(cmd)

        for ha in test.hosts_a:
            cmd = "python ./checker.py \
                    --active \
                    --testname={} \
                    --host={} &".format(testname, ha)
            self.hosts[ha].cmd(cmd)

        results = {}
        passed = True
        # XXX will this loop necessarily end?
        for hp in test.hosts_p:
            h = self.net.get(info.get("host_name", hp))
            # Somehow, somewhere, a newline is converted to a CRLF...
            results[h.name] = h.waitOutput().strip("\r\n")
            passed = passed and (results[h.name] == "PASS")

        return passed
예제 #7
0
def router_arp_reply_a(testname):
    """Test the router responds to an ARP request"""
    hs = TESTS[testname].host_s
    r_ip = info.get("router_ip", hs)
    s_mac = info.get("host_mac", hs)
    s_ip = info.get("host_ip", hs)
    return [Ether(src=s_mac, dst=ETHER_BROADCAST) / ARP(psrc=s_ip, pdst=r_ip)]
예제 #8
0
 def build(self, n=2):
     switch = self.addHost('router')
     # Python's range(N) generates 0..N-1
     for h in range(n):
         host = self.addHost(info.get("host_name", h))
         i1 = info.get("host_if_name", h)
         i2 = info.get("router_if_name", h)
         self.addLink(host, switch, intfName1=i1, intfName2=i2)
예제 #9
0
def router_icmp_a(testname):
    hs = TESTS[testname].host_s
    router = TESTS[testname].router
    r_mac = info.get("router_mac", router, hs)
    r_ip = info.get("router_ip", hs)
    s_mac = info.get("host_mac", hs)
    s_ip = info.get("host_ip", hs)
    return [Ether(src=s_mac, dst=r_mac) / IP(src=s_ip, dst=r_ip) / ICMP()]
예제 #10
0
    def setup_macs(self):
        for i, host in enumerate(self.hosts):
            h_mac = info.get("host_mac", i)
            h_if = info.get("host_if_name", i)
            host.cmd("ifconfig {} hw ether {}".format(h_if, h_mac))

            r_mac = info.get("router_mac", i)
            r_if = info.get("router_if_name", i)
            self.router.cmd("ifconfig {} hw ether {}".format(r_if, r_mac))
def forward_no_arp_a(testname):
    """Send two packets; there should be at most just one! ARP request"""
    hs = TESTS[testname].host_s
    hr = TESTS[testname].host_r
    r_mac = info.get("router_mac", hs)
    target_ip = info.get("host_ip", hr)

    packet = Ether(dst=r_mac) / IP(dst=target_ip)
    return [packet, packet]
예제 #12
0
def host_unreachable_a(testname):
    target_ip = "10.0.0.1"
    hs = TESTS[testname].host_s
    router = TESTS[testname].router
    s_mac = info.get("host_mac", hs)
    s_ip = info.get("host_ip", hs)
    r_mac = info.get("router_mac", hs, router)

    return [Ether(src=s_mac, dst=r_mac) / IP(src=s_ip, dst=target_ip)]
예제 #13
0
def icmp_timeout_a(testname):
    hr = TESTS[testname].host_r
    hs = TESTS[testname].host_s
    router = TESTS[testname].router
    target_ip = info.get("host_ip", hr)
    s_mac = info.get("host_mac", hs)
    s_ip = info.get("host_ip", hs)
    r_mac = info.get("router_mac", hs, router)

    return [Ether(src=s_mac, dst=r_mac) / IP(src=s_ip, dst=target_ip, ttl=1)]
예제 #14
0
def forward_a(testname):
    hs = TESTS[testname].host_s
    hr = TESTS[testname].host_r
    router = TESTS[testname].router
    r_mac = info.get("router_mac", hs, router)
    s_mac = info.get("host_mac", hs)
    s_ip = info.get("host_ip", hs)
    target_ip = info.get("host_ip", hr)

    return [Ether(src=s_mac, dst=r_mac) / IP(src=s_ip, dst=target_ip)]
예제 #15
0
def wrong_checksum_a(testname):
    hs = TESTS[testname].host_s
    hr = TESTS[testname].host_r
    r_mac = info.get("router_mac", hs)
    target_ip = info.get("host_ip", hr)

    i = IP(dst=target_ip)
    chk = checksum(bytes(i))
    chk = (chk + 1) % (2**16)
    i.chksum = chk

    return Ether(dst=r_mac) / i
def validate_all_from_host_or_replies(host, packets):
    """True if all packets are sent from host (an eventual replies)"""
    for ps, pr in zip(packets[::2], packets[1::2]):
        if Ether not in ps or Ether not in pr:
            return False

        if ps[Ether].src != info.get("host_mac", host):
            return False

        if pr[Ether].dst != info.get("host_mac", host):
            return False

    return True
예제 #17
0
    def __init__(self, net, n_routers, n_hosts):
        self.net = net
        self.hosts = []
        self.routers = []
        self.n_hosts = n_hosts
        for i in range(n_routers):
            r = self.net.get(info.get("router_name", i))
            hosts = []
            for j in range(n_hosts):
                hidx = i * n_hosts + j
                h = self.net.get(info.get("host_name", hidx))
                hosts.append(h)
                self.hosts.append(h)

            self.routers.append((r, hosts))
예제 #18
0
 def __init__(self, net, n_hosts):
     self.net = net
     self.router = self.net.get("router")
     self.hosts = []
     for i in range(n_hosts):
         h = self.net.get(info.get("host_name", i))
         self.hosts.append(h)
예제 #19
0
 def add_hosts_entries(self):
     for i, (router, hosts) in enumerate(self.routers):
         for j, host in enumerate(hosts):
             for h in range(len(self.hosts)):
                 ip = info.get("host_ip", h)
                 # FIXME entries should be added only if they aren't there.
                 host.cmd("echo '{} h{}' >> /etc/hosts".format(ip, h))
def validate_all_from_host(host, packets):
    """True if all packets are sent from host (an eventual replies)"""
    for packet in packets:
        if Ether not in packet:
            return False

        if packet[Ether].src != info.get("host_mac", host):
            return False

    return True
def router_arp_request_p(testname, packets):
    # at this point we're not interested in whether the router actually
    # delivered the packet, just the arp request.
    hr = TESTS[testname].host_r

    assert len(packets) >= 1, "No packet received!"

    assert ARP in packets[0], "No ARP request!"
    a = packets[0][ARP]
    if a.get_field("op").i2repr(a, a.op) != "who-has":
        error("Wrong ARP type")

    if a.pdst != info.get("host_ip", hr):
        error("Wrong ARP address request")
        error("Expected {}".format(info.get("host_ip", hr)))
        error("Got {}".format(a.pdst))
        return False

    return True
예제 #22
0
    def start_routers(self):
        ifaces = ""
        for i in range(len(self.routers)):
            for j in range(i + 1, len(self.routers)):
                ifaces += "{} ".format(info.get("r2r_if_name", i, j))

        for i in range(self.n_hosts):
            ifaces += "{} ".format(info.get("router_if_name", i))

        for i, (router, _) in enumerate(self.routers):
            out = info.get("out_file", i)
            err = info.get("err_file", i)
            rtable = info.get("rtable", i)
            rname = "router{}".format(i)
            router.cmd("ln -s router {}".format(rname))
            if not len(router.cmd("pgrep {}".format(rname))):
                cmd = "./{} {} {} > {} 2> {} &".format(rname, rtable, ifaces,
                                                       out, err)
                router.cmd(cmd)
                time.sleep(info.TIMEOUT / 2)
예제 #23
0
    def build(self, nr=2, nh=2):
        routers = []
        for i in range(nr):
            routers.append(self.addHost(info.get("router_name", i)))

        for i in range(nr):
            for j in range(i + 1, nr):
                ifn = info.get("r2r_if_name", i, j)
                self.addLink(routers[i],
                             routers[j],
                             intfName1=ifn,
                             intfName2=ifn)

        for i in range(nr):
            for j in range(nh):
                hidx = i * nh + j

                host = self.addHost(info.get("host_name", hidx))
                i1 = info.get("host_if_name", hidx)
                i2 = info.get("router_if_name", j)
                self.addLink(host, routers[i], intfName1=i1, intfName2=i2)
def router_arp_reply_p(testname, packets):
    hr = TESTS[testname].host_r
    if len(packets) < 2:
        error("No reply received")
        return False

    assert Ether in packets[1], "Packet not of Ethernet type"
    e = packets[1][Ether]
    if e.src != info.get("router_mac", hr):
        error("Wrong source address")
        error("Expected: {}".format(info.get("router_mac", hr)))
        error("Got: {}".format(e.src))
        return False

    if e.dst != info.get("host_mac", hr):
        error("Wrong destination address")
        error("Expected: {}".format(info.get("host_mac", hr)))
        error("Got: {}".format(e.dst))
        return False

    assert ARP in packets[0], "Packet not of ARP type"
    a = packets[1][ARP]

    if a.get_field("op").i2repr(a, a.op) != "is-at":
        error("Wrong ARP type")
        return False

    if a[ARP].hwdst != info.get("host_mac", hr):
        error("Wrong destination in ARP reply")
        error("Expected: {}".format(info.get("host_mac", hr)))
        error("Got: {}".format(a[ARP].hwdst))
        return False

    return True
예제 #25
0
    def setup_ifaces(self):
        for i, (router, hosts) in enumerate(self.routers):
            for j, host in enumerate(hosts):
                hidx = i * len(hosts) + j
                host_ip = info.get("host_ip", hidx)
                router_ip = info.get("router_ip", hidx)
                host_if = info.get("host_if_name", hidx)
                router_if = info.get("router_if_name", j)

                router.setIP(router_ip, prefixLen=24, intf=router_if)
                host.setIP(host_ip, prefixLen=24, intf=host_if)

        nr = len(self.routers)
        for i in range(nr):
            for j in range(i + 1, nr):
                ri_if = info.get("r2r_if_name", i, j)
                rj_if = info.get("r2r_if_name", i, j)
                ri_ip = info.get("r2r_ip1", i, j)
                rj_ip = info.get("r2r_ip2", i, j)
                self.routers[i][0].setIP(ri_ip, prefixLen=24, intf=ri_if)
                self.routers[j][0].setIP(rj_ip, prefixLen=24, intf=rj_if)
    def disable_unneeded(self):
        def disable_ipv6(host):
            host.cmd('sysctl -w net.ipv6.conf.all.disable_ipv6=1')
            host.cmd('sysctl -w net.ipv6.conf.default.disable_ipv6=1')

        def disable_nic_checksum(host, iface):
            host.cmd('ethtool iface {} --offload rx off tx off'.format(iface))
            host.cmd('ethtool -K {} tx-checksum-ip-generic off'.format(iface))

        def disable_arp(host, iface):
            host.cmd("ip link set dev {} arp off".format(iface))

        disable_ipv6(self.router)
        for i, host in enumerate(self.hosts):
            disable_ipv6(host)
            h_if = info.get("host_if_name", i)
            disable_nic_checksum(host, h_if)

        # we want complete control over these actions
        self.router.cmd('echo "0" > /proc/sys/net/ipv4/ip_forward')
        self.router.cmd('echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_all')
예제 #27
0
    def setup_macs(self):
        for i, (router, hosts) in enumerate(self.routers):
            for j, host in enumerate(hosts):
                hidx = i * len(hosts) + j
                h_mac = info.get("host_mac", hidx)
                h_if = info.get("host_if_name", hidx)
                host.cmd("ifconfig {} hw ether {}".format(h_if, h_mac))

                r_mac = info.get("router_mac", hidx, i)
                r_if = info.get("router_if_name", j)
                router.cmd("ifconfig {} hw ether {}".format(r_if, r_mac))

        nr = len(self.routers)
        for i in range(nr):
            for j in range(i + 1, nr):
                ri_mac = info.get("r2r_mac", i, j)
                rj_mac = info.get("r2r_mac", j, i)
                ri_if = info.get("r2r_if_name", i, j)
                rj_if = info.get("r2r_if_name", i, j)
                self.routers[i][0].cmd("ifconfig {} hw ether {}".format(
                    ri_if, ri_mac))
                self.routers[j][0].cmd("ifconfig {} hw ether {}".format(
                    rj_if, rj_mac))
예제 #28
0
def passive(host, testname):
    iface = info.get("host_if_name", host)
    packets = capture(iface)

    test = tests.TESTS[testname]
    if host == test.host_r:
        fn = test.passive_fn
    elif host == test.host_s:
        fn = tests.sender_default
    else:
        fn = tests.check_nothing

    try:
        status = fn(testname, packets)
    except AssertionError as e:
        traceback.print_tb(e.__traceback__)
        status = False

    if (status):
        print("PASS")
    else:
        print("FAIL")
예제 #29
0
 def add_default_routes(self):
     for i, host in enumerate(self.hosts):
         ip = info.get("router_ip", i)
         host.cmd("ip route add default via {}".format(ip))
예제 #30
0
def get_info(pe, filename):
    show_info = json.loads(info.get(pe, filename))
    return show_info
예제 #31
0
파일: bpch.py 프로젝트: ZorroF/gchem
    def fromfile(cls, filename, mode='rb', endian='>', skip_values=False):
        """\
        Creates a binary punch file from a given filename.

        Arguments:
        - filename
        - mode (default 'rb')
        - endian (default '>')
        - skip values: If True only datablock headers will be read into
          memory and the values will read on request. Default: False.
        """
        cls = cls()

        cls.name = filename
        cls.mode = mode
        cls.datablocks = list()

        # read file header
        cls.size = os.path.getsize(filename)
        cls.endian = endian
        cls._file = uff.FortranFile(filename, mode, endian)
        cls.filetype = cls._file.readline().strip()
        cls.title = cls._file.readline().strip()

        while cls._file.tell() < cls.size:

            # read first and second header line
            line = cls._file.readline('20sffii')
            modelname, res0, res1, halfpolar, center180 = line
            line = cls._file.readline('40si40sdd40s7i')
            category, number, unit, tau0, tau1, reserved = line[:6]
            dim0, dim1, dim2, dim3, dim4, dim5, skip = line[6:]

            # skip datablock (read datablock if accessing value)
            position = cls._file.tell()
            if skip_values:
                cls._file.skipline()
                values = None
            else:
                values = numpy.array(cls._file.readline('*f'))
                values = values.reshape((dim0,dim1,dim2), order='F')

            # get addtional information
            offset = CATEGORY2OFFSET.get(category.strip(), None)
            if offset is None:
                info = {}
            else:
                info = TRACER2INFO.get(number+offset, {})

            # create DataBlock
            datablock = DataBlock(
                category = category.strip(),
                center180 = bool(center180),
                halfpolar = bool(halfpolar),
                modelname = modelname.strip(),
                number = number,
                origin = (dim3, dim4, dim5),
                resolution = (res0, res1),
                shape = (dim0, dim1, dim2),
                times = (misc.tau2time(tau0), misc.tau2time(tau1)),
                unit = unit.strip(),
                name = info.get('name', None),
                fullname = info.get('full_name', None),
                carbon_weight = info.get('c_weight', None),
                molecular_weight = info.get('molecular_weight', None),
                position = position,
                values = values,
                file = cls._file
            )

            cls.append(datablock)

        return cls
예제 #32
0
 def add_hosts_entries(self):
     for host in self.hosts:
         for j in range(len(self.hosts)):
             ip = info.get("host_ip", j)
             host.cmd("echo '{} h{}' >> /etc/hosts".format(ip, j))
예제 #33
0
def get_info(pe, filename):
	show_info = json.loads(info.get(pe, filename))
	return json.dumps({"Short Info": show_info}, indent=4, separators=(',', ': '))
예제 #34
0
파일: switch.py 프로젝트: f3l/shareacc
#!/usr/bin/python2

import yaml
import info
import cgi
import time

print "Status: 302 Found\r\nLocation: /\r\n\r\n"

accounts = yaml.load(open('accounts.yaml').read())
form = cgi.FieldStorage()

for account in accounts:
	ainfo = info.get(account['num'])
	ainfo.update({ 'used': int(time.time()) if (form.getvalue("u%s" % account['num'], 'off') == 'on') else False })
	info.set(account['num'], ainfo)