def test_simple_coinjoin(monkeypatch, tmpdir, setup_cj, wallet_cls):
def raise_exit(i):
raise Exception("sys.exit called")
monkeypatch.setattr(sys, 'exit', raise_exit)
set_commitment_file(str(tmpdir.join('commitments.json')))
MAKER_NUM = 3
wallets = make_wallets_to_list(make_wallets(
MAKER_NUM + 1, wallet_structures=[[4, 0, 0, 0, 0]] * (MAKER_NUM + 1),
mean_amt=1, wallet_cls=wallet_cls))
jm_single().bc_interface.tickchain()
sync_wallets(wallets)
makers = [YieldGeneratorBasic(
wallets[i],
[0, 2000, 0, 'swabsoffer', 10**7]) for i in range(MAKER_NUM)]
orderbook = create_orderbook(makers)
assert len(orderbook) == MAKER_NUM
cj_amount = int(1.1 * 10**8)
# mixdepth, amount, counterparties, dest_addr, waittime
schedule = [(0, cj_amount, MAKER_NUM, 'INTERNAL', 0)]
taker = create_taker(wallets[-1], schedule, monkeypatch)
active_orders, maker_data = init_coinjoin(taker, makers,
orderbook, cj_amount)
txdata = taker.receive_utxos(maker_data)
assert txdata[0], "taker.receive_utxos error"
taker_final_result = do_tx_signing(taker, makers, active_orders, txdata)
assert taker_final_result is not False
assert taker.on_finished_callback.status is not False
def test_coinjoin_mixdepth_wrap_taker(monkeypatch, tmpdir, setup_cj):
def raise_exit(i):
raise Exception("sys.exit called")
monkeypatch.setattr(sys, 'exit', raise_exit)
set_commitment_file(str(tmpdir.join('commitments.json')))
MAKER_NUM = 3
wallet_services = make_wallets_to_list(
make_wallets(MAKER_NUM + 1,
wallet_structures=[[4, 0, 0, 0, 0]] * MAKER_NUM +
[[0, 0, 0, 0, 3]],
mean_amt=1))
for wallet_service in wallet_services:
assert wallet_service.max_mixdepth == 4
jm_single().bc_interface.tickchain()
jm_single().bc_interface.tickchain()
sync_wallets(wallet_services)
cj_fee = 2000
makers = [
YieldGeneratorBasic(
wallet_services[i],
[0, cj_fee, 0, absoffer_type_map[SegwitWallet], 10**7])
for i in range(MAKER_NUM)
]
create_orders(makers)
orderbook = create_orderbook(makers)
assert len(orderbook) == MAKER_NUM
cj_amount = int(1.1 * 10**8)
# mixdepth, amount, counterparties, dest_addr, waittime, rounding
schedule = [(4, cj_amount, MAKER_NUM, 'INTERNAL', 0, NO_ROUNDING)]
taker = create_taker(wallet_services[-1], schedule, monkeypatch)
active_orders, maker_data = init_coinjoin(taker, makers, orderbook,
cj_amount)
txdata = taker.receive_utxos(maker_data)
assert txdata[0], "taker.receive_utxos error"
taker_final_result = do_tx_signing(taker, makers, active_orders, txdata)
assert taker_final_result is not False
tx = btc.CMutableTransaction.deserialize(hextobin(txdata[2]))
wallet_service = wallet_services[-1]
# TODO change for new tx monitoring:
wallet_service.remove_old_utxos(tx)
wallet_service.add_new_utxos(tx)
balances = wallet_service.get_balance_by_mixdepth()
assert balances[0] == cj_amount
# <= because of tx fee
assert balances[4] <= 3 * 10**8 - cj_amount - (cj_fee * MAKER_NUM)
def test_coinjoin_mixdepth_wrap_maker(monkeypatch, tmpdir, setup_cj):
def raise_exit(i):
raise Exception("sys.exit called")
monkeypatch.setattr(sys, 'exit', raise_exit)
set_commitment_file(str(tmpdir.join('commitments.json')))
MAKER_NUM = 2
wallet_services = make_wallets_to_list(
make_wallets(MAKER_NUM + 1,
wallet_structures=[[0, 0, 0, 0, 4]] * MAKER_NUM +
[[3, 0, 0, 0, 0]],
mean_amt=1))
for wallet_service in wallet_services:
assert wallet_service.max_mixdepth == 4
jm_single().bc_interface.tickchain()
jm_single().bc_interface.tickchain()
sync_wallets(wallet_services)
cj_fee = 2000
makers = [
YieldGeneratorBasic(wallet_services[i],
[0, cj_fee, 0, 'swabsoffer', 10**7])
for i in range(MAKER_NUM)
]
orderbook = create_orderbook(makers)
assert len(orderbook) == MAKER_NUM
cj_amount = int(1.1 * 10**8)
# mixdepth, amount, counterparties, dest_addr, waittime, rounding
schedule = [(0, cj_amount, MAKER_NUM, 'INTERNAL', 0, NO_ROUNDING)]
taker = create_taker(wallet_services[-1], schedule, monkeypatch)
active_orders, maker_data = init_coinjoin(taker, makers, orderbook,
cj_amount)
txdata = taker.receive_utxos(maker_data)
assert txdata[0], "taker.receive_utxos error"
taker_final_result = do_tx_signing(taker, makers, active_orders, txdata)
assert taker_final_result is not False
tx = btc.deserialize(txdata[2])
binarize_tx(tx)
for i in range(MAKER_NUM):
wallet_service = wallet_services[i]
# TODO as above re: monitoring
wallet_service.remove_old_utxos_(tx)
wallet_service.add_new_utxos_(tx, b'\x00' * 32) # fake txid
balances = wallet_service.get_balance_by_mixdepth()
assert balances[0] == cj_amount
assert balances[4] == 4 * 10**8 - cj_amount + cj_fee
def load_program_config(config_path=None, bs=None):
global_singleton.config.readfp(io.BytesIO(defaultconfig))
if not config_path:
config_path = os.getcwd()
global_singleton.config_location = os.path.join(
config_path, global_singleton.config_location)
loadedFiles = global_singleton.config.read(
[global_singleton.config_location])
#Hack required for electrum; must be able to enforce a different
#blockchain interface even in default/new load.
if bs:
global_singleton.config.set("BLOCKCHAIN", "blockchain_source", bs)
# Create default config file if not found
if len(loadedFiles) != 1:
with open(global_singleton.config_location, "w") as configfile:
configfile.write(defaultconfig)
# check for sections
#These are left as sanity checks but currently impossible
#since any edits are overlays to the default, these sections/options will
#always exist.
for s in required_options: #pragma: no cover
if s not in global_singleton.config.sections():
raise Exception(
"Config file does not contain the required section: " + s)
# then check for specific options
for k, v in required_options.iteritems(): #pragma: no cover
for o in v:
if o not in global_singleton.config.options(k):
raise Exception(
"Config file does not contain the required option: " + o)
loglevel = global_singleton.config.get("LOGGING", "console_log_level")
try:
set_logging_level(loglevel)
except:
print(
"Failed to set logging level, must be DEBUG, INFO, WARNING, ERROR")
try:
global_singleton.maker_timeout_sec = global_singleton.config.getint(
'TIMEOUT', 'maker_timeout_sec')
except NoOptionError: #pragma: no cover
log.debug('TIMEOUT/maker_timeout_sec not found in .cfg file, '
'using default value')
# configure the interface to the blockchain on startup
global_singleton.bc_interface = get_blockchain_interface_instance(
global_singleton.config)
#set the location of the commitments file
try:
global_singleton.commit_file_location = global_singleton.config.get(
"POLICY", "commit_file_location")
except NoOptionError: #pragma: no cover
log.debug("No commitment file location in config, using default "
"location cmtdata/commitments.json")
set_commitment_file(
os.path.join(config_path, global_singleton.commit_file_location))
def test_coinjoin_mixed_maker_addresses(monkeypatch, tmpdir, setup_cj,
wallet_cls, wallet_cls_sec):
set_commitment_file(str(tmpdir.join('commitments.json')))
MAKER_NUM = 2
wallet_services = make_wallets_to_list(
make_wallets(MAKER_NUM + 1,
wallet_structures=[[1, 0, 0, 0, 0]] * MAKER_NUM +
[[3, 0, 0, 0, 0]],
mean_amt=1,
wallet_cls=wallet_cls))
wallet_services_sec = make_wallets_to_list(
make_wallets(MAKER_NUM,
wallet_structures=[[1, 0, 0, 0, 0]] * MAKER_NUM,
mean_amt=1,
wallet_cls=wallet_cls_sec))
for i in range(MAKER_NUM):
wif = wallet_services_sec[i].get_wif(0, False, 0)
wallet_services[i].wallet.import_private_key(
0, wif, key_type=wallet_services_sec[i].wallet.TYPE)
jm_single().bc_interface.tickchain()
jm_single().bc_interface.tickchain()
sync_wallets(wallet_services, fast=False)
makers = [
YieldGeneratorBasic(wallet_services[i],
[0, 2000, 0, 'swabsoffer', 10**7])
for i in range(MAKER_NUM)
]
orderbook = create_orderbook(makers)
cj_amount = int(1.1 * 10**8)
# mixdepth, amount, counterparties, dest_addr, waittime, rounding
schedule = [(0, cj_amount, MAKER_NUM, 'INTERNAL', 0, NO_ROUNDING)]
taker = create_taker(wallet_services[-1], schedule, monkeypatch)
active_orders, maker_data = init_coinjoin(taker, makers, orderbook,
cj_amount)
txdata = taker.receive_utxos(maker_data)
assert txdata[0], "taker.receive_utxos error"
taker_final_result = do_tx_signing(taker, makers, active_orders, txdata)
assert taker_final_result is not False
assert taker.on_finished_callback.status is not False
def load_program_config(config_path=None, bs=None):
global_singleton.config.readfp(io.StringIO(defaultconfig))
remove_unwanted_default_settings(global_singleton.config)
if not config_path:
config_path = os.getcwd()
global_singleton.config_location = os.path.join(
config_path, global_singleton.config_location)
loadedFiles = global_singleton.config.read(
[global_singleton.config_location])
#Hack required for electrum; must be able to enforce a different
#blockchain interface even in default/new load.
if bs:
global_singleton.config.set("BLOCKCHAIN", "blockchain_source", bs)
# Create default config file if not found
if len(loadedFiles) != 1:
with open(global_singleton.config_location, "w") as configfile:
configfile.write(defaultconfig)
jmprint(
"Created a new `joinmarket.cfg`. Please review and adopt the "
"settings and restart joinmarket.", "info")
exit(1)
#These are left as sanity checks but currently impossible
#since any edits are overlays to the default, these sections/options will
#always exist.
# FIXME: This check is a best-effort attempt. Certain incorrect section
# names can pass and so can non-first invalid sections.
for s in required_options: #pragma: no cover
# check for sections
avail = None
if not global_singleton.config.has_section(s):
for avail in global_singleton.config.sections():
if avail.startswith(s):
break
else:
raise Exception(
"Config file does not contain the required section: " + s)
# then check for specific options
k = avail or s
for o in required_options[s]:
if not global_singleton.config.has_option(k, o):
raise Exception("Config file does not contain the required "
"option '{}' in section '{}'.".format(o, k))
loglevel = global_singleton.config.get("LOGGING", "console_log_level")
try:
set_logging_level(loglevel)
except:
jmprint(
"Failed to set logging level, must be DEBUG, INFO, WARNING, ERROR",
"error")
# Logs to the console are color-coded if user chooses (file is unaffected)
if global_singleton.config.get("LOGGING", "color") == "true":
set_logging_color(True)
else:
set_logging_color(False)
try:
global_singleton.maker_timeout_sec = global_singleton.config.getint(
'TIMEOUT', 'maker_timeout_sec')
except NoOptionError: #pragma: no cover
log.debug('TIMEOUT/maker_timeout_sec not found in .cfg file, '
'using default value')
# configure the interface to the blockchain on startup
global_singleton.bc_interface = get_blockchain_interface_instance(
global_singleton.config)
#set the location of the commitments file
try:
global_singleton.commit_file_location = global_singleton.config.get(
"POLICY", "commit_file_location")
except NoOptionError: #pragma: no cover
log.debug("No commitment file location in config, using default "
"location cmtdata/commitments.json")
set_commitment_file(
os.path.join(config_path, global_singleton.commit_file_location))
def load_program_config(config_path="", bs=None, plugin_services=[]):
global_singleton.config.readfp(io.StringIO(defaultconfig))
if not config_path:
config_path = lookup_appdata_folder(global_singleton.APPNAME)
# we set the global home directory, but keep the config_path variable
# for callers of this function:
global_singleton.datadir = config_path
jmprint("User data location: " + global_singleton.datadir, "info")
if not os.path.exists(global_singleton.datadir):
os.makedirs(global_singleton.datadir)
# prepare folders for wallets and logs
if not os.path.exists(os.path.join(global_singleton.datadir, "wallets")):
os.makedirs(os.path.join(global_singleton.datadir, "wallets"))
if not os.path.exists(os.path.join(global_singleton.datadir, "logs")):
os.makedirs(os.path.join(global_singleton.datadir, "logs"))
if not os.path.exists(os.path.join(global_singleton.datadir, "cmtdata")):
os.makedirs(os.path.join(global_singleton.datadir, "cmtdata"))
global_singleton.config_location = os.path.join(
global_singleton.datadir, global_singleton.config_location)
remove_unwanted_default_settings(global_singleton.config)
loadedFiles = global_singleton.config.read([global_singleton.config_location
])
#Hack required for electrum; must be able to enforce a different
#blockchain interface even in default/new load.
if bs:
global_singleton.config.set("BLOCKCHAIN", "blockchain_source", bs)
# Create default config file if not found
if len(loadedFiles) != 1:
with open(global_singleton.config_location, "w") as configfile:
configfile.write(defaultconfig)
jmprint("Created a new `joinmarket.cfg`. Please review and adopt the "
"settings and restart joinmarket.", "info")
sys.exit(EXIT_FAILURE)
#These are left as sanity checks but currently impossible
#since any edits are overlays to the default, these sections/options will
#always exist.
# FIXME: This check is a best-effort attempt. Certain incorrect section
# names can pass and so can non-first invalid sections.
for s in required_options: #pragma: no cover
# check for sections
avail = None
if not global_singleton.config.has_section(s):
for avail in global_singleton.config.sections():
if avail.startswith(s):
break
else:
raise Exception(
"Config file does not contain the required section: " + s)
# then check for specific options
k = avail or s
for o in required_options[s]:
if not global_singleton.config.has_option(k, o):
raise Exception("Config file does not contain the required "
"option '{}' in section '{}'.".format(o, k))
loglevel = global_singleton.config.get("LOGGING", "console_log_level")
try:
set_logging_level(loglevel)
except:
jmprint("Failed to set logging level, must be DEBUG, INFO, WARNING, ERROR",
"error")
# Logs to the console are color-coded if user chooses (file is unaffected)
if global_singleton.config.get("LOGGING", "color") == "true":
set_logging_color(True)
else:
set_logging_color(False)
try:
global_singleton.maker_timeout_sec = global_singleton.config.getint(
'TIMEOUT', 'maker_timeout_sec')
except NoOptionError: #pragma: no cover
log.debug('TIMEOUT/maker_timeout_sec not found in .cfg file, '
'using default value')
# configure the interface to the blockchain on startup
global_singleton.bc_interface = get_blockchain_interface_instance(
global_singleton.config)
# set the location of the commitments file; for non-mainnet a different
# file is used to avoid conflict
try:
global_singleton.commit_file_location = global_singleton.config.get(
"POLICY", "commit_file_location")
except NoOptionError: #pragma: no cover
if get_network() == "mainnet":
log.debug("No commitment file location in config, using default "
"location cmtdata/commitments.json")
if get_network() != "mainnet":
# no need to be flexible for tests; note this is used
# for regtest, signet and testnet3
global_singleton.commit_file_location = "cmtdata/" + get_network() + \
"_commitments.json"
set_commitment_file(os.path.join(config_path,
global_singleton.commit_file_location))
for p in plugin_services:
# for now, at this config level, the only significance
# of a "plugin" is that it keeps its own separate log.
# We require that a section exists in the config file,
# and that it has enabled=true:
assert isinstance(p, JMPluginService)
if not (global_singleton.config.has_section(p.name) and \
global_singleton.config.has_option(p.name, "enabled") and \
global_singleton.config.get(p.name, "enabled") == "true"):
break
if p.requires_logging:
# make sure the environment can accept a logfile by
# creating the directory in the correct place,
# and setting that in the plugin object; the plugin
# itself will switch on its own logging when ready,
# attaching a filehandler to the global log.
plogsdir = os.path.join(os.path.dirname(
global_singleton.config_location), "logs", p.name)
if not os.path.exists(plogsdir):
os.makedirs(plogsdir)
p.set_log_dir(plogsdir)
