def decode(cls, data, bytes_to_read=None):
"""Compressed messages should pass in bytes_to_read (via message size)
otherwise, we decode from data as Int32
"""
if isinstance(data, bytes):
data = io.BytesIO(data)
if bytes_to_read is None:
bytes_to_read = Int32.decode(data)
# if FetchRequest max_bytes is smaller than the available message set
# the server returns partial data for the final message
# So create an internal buffer to avoid over-reading
raw = io.BytesIO(data.read(bytes_to_read))
items = []
while bytes_to_read:
try:
offset = Int64.decode(raw)
msg_bytes = Bytes.decode(raw)
bytes_to_read -= 8 + 4 + len(msg_bytes)
items.append(
(offset, len(msg_bytes), Message.decode(msg_bytes)))
except ValueError:
# PartialMessage to signal that max_bytes may be too small
items.append((None, None, PartialMessage()))
break
return items
def decode(cls, data, bytes_to_read=None):
"""Compressed messages should pass in bytes_to_read (via message size)
otherwise, we decode from data as Int32
"""
if isinstance(data, bytes):
data = io.BytesIO(data)
if bytes_to_read is None:
bytes_to_read = Int32.decode(data)
# if FetchRequest max_bytes is smaller than the available message set
# the server returns partial data for the final message
# So create an internal buffer to avoid over-reading
raw = io.BytesIO(data.read(bytes_to_read))
items = []
while bytes_to_read:
try:
offset = Int64.decode(raw)
msg_bytes = Bytes.decode(raw)
bytes_to_read -= 8 + 4 + len(msg_bytes)
items.append((offset, len(msg_bytes), Message.decode(msg_bytes)))
except ValueError:
# PartialMessage to signal that max_bytes may be too small
items.append((None, None, PartialMessage()))
break
return items
def _process_response(self, read_buffer):
assert not self._processing, 'Recursion not supported'
self._processing = True
ifr = self.in_flight_requests.popleft()
# verify send/recv correlation ids match
recv_correlation_id = Int32.decode(read_buffer)
# 0.8.2 quirk
if (self.config['api_version'] == (0, 8, 2)
and ifr.response_type is GroupCoordinatorResponse[0]
and ifr.correlation_id != 0 and recv_correlation_id == 0):
log.warning('Kafka 0.8.2 quirk -- GroupCoordinatorResponse'
' coorelation id does not match request. This'
' should go away once at least one topic has been'
' initialized on the broker')
elif ifr.correlation_id != recv_correlation_id:
error = Errors.CorrelationIdError(
'%s: Correlation ids do not match: sent %d, recv %d' %
(str(self), ifr.correlation_id, recv_correlation_id))
ifr.future.failure(error)
self.close()
self._processing = False
return None
# decode response
response = ifr.response_type.decode(read_buffer)
log.debug('%s Response %d: %s', self, ifr.correlation_id, response)
ifr.future.success(response)
self._processing = False
return response
def _process_response(self, read_buffer):
assert not self._processing, 'Recursion not supported'
self._processing = True
ifr = self.in_flight_requests.popleft()
# verify send/recv correlation ids match
recv_correlation_id = Int32.decode(read_buffer)
# 0.8.2 quirk
if (self.config['api_version'] == (0, 8, 2) and
ifr.response_type is GroupCoordinatorResponse and
recv_correlation_id == 0):
raise Errors.KafkaError(
'Kafka 0.8.2 quirk -- try creating a topic first')
elif ifr.correlation_id != recv_correlation_id:
error = Errors.CorrelationIdError(
'Correlation ids do not match: sent %d, recv %d'
% (ifr.correlation_id, recv_correlation_id))
ifr.future.fail(error)
self.close()
self._processing = False
return None
# decode response
response = ifr.response_type.decode(read_buffer)
log.debug('%s Response %d: %s', self, ifr.correlation_id, response)
ifr.future.success(response)
self._processing = False
return response
def _process_response(self, read_buffer):
assert not self._processing, 'Recursion not supported'
self._processing = True
ifr = self.in_flight_requests.popleft()
# verify send/recv correlation ids match
recv_correlation_id = Int32.decode(read_buffer)
# 0.8.2 quirk
if (self.config['api_version'] == (0, 8, 2) and
ifr.response_type is GroupCoordinatorResponse and
recv_correlation_id == 0):
raise Errors.KafkaError(
'Kafka 0.8.2 quirk -- try creating a topic first')
elif ifr.correlation_id != recv_correlation_id:
error = Errors.CorrelationIdError(
'Correlation ids do not match: sent %d, recv %d'
% (ifr.correlation_id, recv_correlation_id))
ifr.future.fail(error)
self.close()
self._processing = False
return None
# decode response
response = ifr.response_type.decode(read_buffer)
log.debug('%s Response %d: %s', self, ifr.correlation_id, response)
ifr.future.success(response)
self._processing = False
return response
def _process_response(self, read_buffer):
assert not self._processing, 'Recursion not supported'
self._processing = True
ifr = self.in_flight_requests.popleft()
# verify send/recv correlation ids match
recv_correlation_id = Int32.decode(read_buffer)
# 0.8.2 quirk
if (self.config['api_version'] == (0, 8, 2) and
ifr.response_type is GroupCoordinatorResponse[0] and
ifr.correlation_id != 0 and
recv_correlation_id == 0):
log.warning('Kafka 0.8.2 quirk -- GroupCoordinatorResponse'
' coorelation id does not match request. This'
' should go away once at least one topic has been'
' initialized on the broker')
elif ifr.correlation_id != recv_correlation_id:
error = Errors.CorrelationIdError(
'%s: Correlation ids do not match: sent %d, recv %d'
% (str(self), ifr.correlation_id, recv_correlation_id))
ifr.future.failure(error)
self.close()
self._processing = False
return None
# decode response
response = ifr.response_type.decode(read_buffer)
log.debug('%s Response %d: %s', self, ifr.correlation_id, response)
ifr.future.success(response)
self._processing = False
return response
def server_thread():
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as ss:
ss.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
ss.bind(('127.0.0.1', PORT))
ss.listen(1)
event.set()
(cs, _) = ss.accept()
with cs:
size = Int32.decode(BytesIO(cs.recv(4, socket.MSG_WAITALL)))
id = Int32.decode(BytesIO(cs.recv(4, socket.MSG_WAITALL)))
cs.recv(size - 4, socket.MSG_WAITALL)
if need_response:
message = b''.join([Int32.encode(id), response.encode()])
cs.send(Int32.encode(len(message)) + message)
event.set()
def receive_bytes(self, data):
"""Process bytes received from the network.
Arguments:
data (bytes): any length bytes received from a network connection
to a kafka broker.
Returns:
responses (list of (correlation_id, response)): any/all completed
responses, decoded from bytes to python objects.
Raises:
KafkaProtocolError: if the bytes received could not be decoded.
CorrelationIdError: if the response does not match the request
correlation id.
"""
i = 0
n = len(data)
responses = []
while i < n:
# Not receiving is the state of reading the payload header
if not self._receiving:
bytes_to_read = min(4 - self._header.tell(), n - i)
self._header.write(data[i:i + bytes_to_read])
i += bytes_to_read
if self._header.tell() == 4:
self._header.seek(0)
nbytes = Int32.decode(self._header)
# reset buffer and switch state to receiving payload bytes
self._rbuffer = KafkaBytes(nbytes)
self._receiving = True
elif self._header.tell() > 4:
raise Errors.KafkaError(
"this should not happen - are you threading?")
if self._receiving:
total_bytes = len(self._rbuffer)
staged_bytes = self._rbuffer.tell()
bytes_to_read = min(total_bytes - staged_bytes, n - i)
self._rbuffer.write(data[i:i + bytes_to_read])
i += bytes_to_read
staged_bytes = self._rbuffer.tell()
if staged_bytes > total_bytes:
raise Errors.KafkaError(
"Receive buffer has more bytes than expected?")
if staged_bytes != total_bytes:
break
self._receiving = False
self._rbuffer.seek(0)
resp = self._process_response(self._rbuffer)
responses.append(resp)
self._reset_buffer()
return responses
def receive_bytes(self, data):
"""Process bytes received from the network.
Arguments:
data (bytes): any length bytes received from a network connection
to a kafka broker.
Returns:
responses (list of (correlation_id, response)): any/all completed
responses, decoded from bytes to python objects.
Raises:
KafkaProtocolError: if the bytes received could not be decoded.
CorrelationIdError: if the response does not match the request
correlation id.
"""
i = 0
n = len(data)
responses = []
while i < n:
# Not receiving is the state of reading the payload header
if not self._receiving:
bytes_to_read = min(4 - self._header.tell(), n - i)
self._header.write(data[i:i+bytes_to_read])
i += bytes_to_read
if self._header.tell() == 4:
self._header.seek(0)
nbytes = Int32.decode(self._header)
# reset buffer and switch state to receiving payload bytes
self._rbuffer = KafkaBytes(nbytes)
self._receiving = True
elif self._header.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
total_bytes = len(self._rbuffer)
staged_bytes = self._rbuffer.tell()
bytes_to_read = min(total_bytes - staged_bytes, n - i)
self._rbuffer.write(data[i:i+bytes_to_read])
i += bytes_to_read
staged_bytes = self._rbuffer.tell()
if staged_bytes > total_bytes:
raise Errors.KafkaError('Receive buffer has more bytes than expected?')
if staged_bytes != total_bytes:
break
self._receiving = False
self._rbuffer.seek(0)
resp = self._process_response(self._rbuffer)
responses.append(resp)
self._reset_buffer()
return responses
def _process_response(self, read_buffer):
assert not self._processing, 'Recursion not supported'
self._processing = True
ifr = self.in_flight_requests.popleft()
if self._sensors:
self._sensors.request_time.record(
(time.time() - ifr.timestamp) * 1000)
# verify send/recv correlation ids match
recv_correlation_id = Int32.decode(read_buffer)
# 0.8.2 quirk
if (self.config['api_version'] == (0, 8, 2)
and ifr.response_type is GroupCoordinatorResponse[0]
and ifr.correlation_id != 0 and recv_correlation_id == 0):
log.warning('Kafka 0.8.2 quirk -- GroupCoordinatorResponse'
' Correlation ID does not match request. This'
' should go away once at least one topic has been'
' initialized on the broker.')
elif ifr.correlation_id != recv_correlation_id:
error = Errors.CorrelationIdError(
'%s: Correlation IDs do not match: sent %d, recv %d' %
(self, ifr.correlation_id, recv_correlation_id))
ifr.future.failure(error)
self.close(error)
self._processing = False
return None
# decode response
try:
response = ifr.response_type.decode(read_buffer)
except ValueError:
read_buffer.seek(0)
buf = read_buffer.read()
log.error(
'%s Response %d [ResponseType: %s Request: %s]:'
' Unable to decode %d-byte buffer: %r',
self, ifr.correlation_id, ifr.response_type, ifr.request,
len(buf), buf)
error = Errors.UnknownError('Unable to decode response')
ifr.future.failure(error)
self.close(error)
self._processing = False
return None
log.debug('%s Response %d: %s', self, ifr.correlation_id, response)
ifr.future.success(response)
self._processing = False
return response
def _process_response(self, read_buffer):
assert not self._processing, 'Recursion not supported'
self._processing = True
ifr = self.in_flight_requests.popleft()
if self._sensors:
self._sensors.request_time.record((time.time() - ifr.timestamp) * 1000)
# verify send/recv correlation ids match
recv_correlation_id = Int32.decode(read_buffer)
# 0.8.2 quirk
if (self.config['api_version'] == (0, 8, 2) and
ifr.response_type is GroupCoordinatorResponse[0] and
ifr.correlation_id != 0 and
recv_correlation_id == 0):
log.warning('Kafka 0.8.2 quirk -- GroupCoordinatorResponse'
' coorelation id does not match request. This'
' should go away once at least one topic has been'
' initialized on the broker')
elif ifr.correlation_id != recv_correlation_id:
error = Errors.CorrelationIdError(
'%s: Correlation ids do not match: sent %d, recv %d'
% (str(self), ifr.correlation_id, recv_correlation_id))
ifr.future.failure(error)
self.close()
self._processing = False
return None
# decode response
try:
response = ifr.response_type.decode(read_buffer)
except ValueError:
read_buffer.seek(0)
buf = read_buffer.read()
log.error('%s Response %d [ResponseType: %s Request: %s]:'
' Unable to decode %d-byte buffer: %r', self,
ifr.correlation_id, ifr.response_type,
ifr.request, len(buf), buf)
ifr.future.failure(Errors.UnknownError('Unable to decode response'))
self.close()
self._processing = False
return None
log.debug('%s Response %d: %s', self, ifr.correlation_id, response)
ifr.future.success(response)
self._processing = False
return response
def _process_response(self, read_buffer):
recv_correlation_id = Int32.decode(read_buffer)
log.debug("Received correlation id: %d", recv_correlation_id)
if not self.in_flight_requests:
raise Errors.CorrelationIdError(
"No in-flight-request found for server response"
" with correlation ID %d" % (recv_correlation_id, ))
(correlation_id, request) = self.in_flight_requests.popleft()
# 0.8.2 quirk
if (recv_correlation_id == 0 and correlation_id != 0
and request.RESPONSE_TYPE is GroupCoordinatorResponse[0] and
(self._api_version == (0, 8, 2) or self._api_version is None)):
log.warning("Kafka 0.8.2 quirk -- GroupCoordinatorResponse"
" Correlation ID does not match request. This"
" should go away once at least one topic has been"
" initialized on the broker.")
elif correlation_id != recv_correlation_id:
# return or raise?
raise Errors.CorrelationIdError(
"Correlation IDs do not match: sent %d, recv %d" %
(correlation_id, recv_correlation_id))
# decode response
log.debug("Processing response %s", request.RESPONSE_TYPE.__name__)
try:
response = request.RESPONSE_TYPE.decode(read_buffer)
except ValueError:
read_buffer.seek(0)
buf = read_buffer.read()
log.error(
"Response %d [ResponseType: %s Request: %s]:"
" Unable to decode %d-byte buffer: %r",
correlation_id,
request.RESPONSE_TYPE,
request,
len(buf),
buf,
)
raise Errors.KafkaProtocolError("Unable to decode response")
return (correlation_id, response)
def encode(cls, items, prepend_size=True):
# RecordAccumulator encodes messagesets internally
if isinstance(items, (io.BytesIO, KafkaBytes)):
size = Int32.decode(items)
if prepend_size:
# rewind and return all the bytes
items.seek(items.tell() - 4)
size += 4
return items.read(size)
encoded_values = []
for (offset, message) in items:
encoded_values.append(Int64.encode(offset))
encoded_values.append(Bytes.encode(message))
encoded = b''.join(encoded_values)
if prepend_size:
return Bytes.encode(encoded)
else:
return encoded
def encode(cls, items, prepend_size=True):
# RecordAccumulator encodes messagesets internally
if isinstance(items, (io.BytesIO, KafkaBytes)):
size = Int32.decode(items)
if prepend_size:
# rewind and return all the bytes
items.seek(items.tell() - 4)
size += 4
return items.read(size)
encoded_values = []
for (offset, message) in items:
encoded_values.append(Int64.encode(offset))
encoded_values.append(Bytes.encode(message))
encoded = b''.join(encoded_values)
if prepend_size:
return Bytes.encode(encoded)
else:
return encoded
def _process_response(self, read_buffer):
recv_correlation_id = Int32.decode(read_buffer)
log.debug('Received correlation id: %d', recv_correlation_id)
if not self.in_flight_requests:
raise Errors.CorrelationIdError(
'No in-flight-request found for server response'
' with correlation ID %d'
% recv_correlation_id)
(correlation_id, request) = self.in_flight_requests.popleft()
# 0.8.2 quirk
if (self._api_version == (0, 8, 2) and
request.RESPONSE_TYPE is GroupCoordinatorResponse[0] and
correlation_id != 0 and
recv_correlation_id == 0):
log.warning('Kafka 0.8.2 quirk -- GroupCoordinatorResponse'
' Correlation ID does not match request. This'
' should go away once at least one topic has been'
' initialized on the broker.')
elif correlation_id != recv_correlation_id:
# return or raise?
raise Errors.CorrelationIdError(
'Correlation IDs do not match: sent %d, recv %d'
% (correlation_id, recv_correlation_id))
# decode response
log.debug('Processing response %s', request.RESPONSE_TYPE.__name__)
try:
response = request.RESPONSE_TYPE.decode(read_buffer)
except ValueError:
read_buffer.seek(0)
buf = read_buffer.read()
log.error('Response %d [ResponseType: %s Request: %s]:'
' Unable to decode %d-byte buffer: %r',
correlation_id, request.RESPONSE_TYPE,
request, len(buf), buf)
raise Errors.KafkaProtocolError('Unable to decode response')
return (correlation_id, response)
def send(request, wait_response=True):
global correlation_id
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.connect(('127.0.0.1', PORT))
header = RequestHeader(
request=request,
correlation_id=correlation_id,
client_id='test'
)
correlation_id += 1
message = b''.join([header.encode(), request.encode()])
size = Int32.encode(len(message))
s.send(size)
s.send(message)
if wait_response:
size = s.recv(4, socket.MSG_WAITALL)
size = Int32.decode(BytesIO(size))
s.recv(size, socket.MSG_WAITALL)
def recv(self):
"""Non-blocking network receive.
Return response if available
"""
assert not self._processing, 'Recursion not supported'
if not self.connected():
log.warning('%s cannot recv: socket not connected', self)
# If requests are pending, we should close the socket and
# fail all the pending request futures
if self.in_flight_requests:
self.close()
return None
elif not self.in_flight_requests:
log.warning('%s: No in-flight-requests to recv', self)
return None
elif self._requests_timed_out():
log.warning('%s timed out after %s ms. Closing connection.',
self, self.config['request_timeout_ms'])
self.close(error=Errors.RequestTimedOutError(
'Request timed out after %s ms' %
self.config['request_timeout_ms']))
return None
# Not receiving is the state of reading the payload header
if not self._receiving:
try:
bytes_to_read = 4 - self._rbuffer.tell()
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error receiving 4-byte payload header -'
' closing socket', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
if self._rbuffer.tell() == 4:
self._rbuffer.seek(0)
self._next_payload_bytes = Int32.decode(self._rbuffer)
# reset buffer and switch state to receiving payload bytes
self._rbuffer.seek(0)
self._rbuffer.truncate()
self._receiving = True
elif self._rbuffer.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
staged_bytes = self._rbuffer.tell()
try:
bytes_to_read = self._next_payload_bytes - staged_bytes
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
# Extremely small chance that we have exactly 4 bytes for a
# header, but nothing to read in the body yet
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error in recv', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
staged_bytes = self._rbuffer.tell()
if staged_bytes > self._next_payload_bytes:
self.close(error=Errors.KafkaError('Receive buffer has more bytes than expected?'))
if staged_bytes != self._next_payload_bytes:
return None
self._receiving = False
self._next_payload_bytes = 0
self._rbuffer.seek(0)
response = self._process_response(self._rbuffer)
self._rbuffer.seek(0)
self._rbuffer.truncate()
return response
def _recv(self):
# Not receiving is the state of reading the payload header
if not self._receiving:
try:
bytes_to_read = 4 - self._rbuffer.tell()
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error receiving 4-byte payload header -'
' closing socket', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
if self._rbuffer.tell() == 4:
self._rbuffer.seek(0)
self._next_payload_bytes = Int32.decode(self._rbuffer)
# reset buffer and switch state to receiving payload bytes
self._rbuffer.seek(0)
self._rbuffer.truncate()
self._receiving = True
elif self._rbuffer.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
staged_bytes = self._rbuffer.tell()
try:
bytes_to_read = self._next_payload_bytes - staged_bytes
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if bytes_to_read and not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
# Extremely small chance that we have exactly 4 bytes for a
# header, but nothing to read in the body yet
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error in recv', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
staged_bytes = self._rbuffer.tell()
if staged_bytes > self._next_payload_bytes:
self.close(error=Errors.KafkaError('Receive buffer has more bytes than expected?'))
if staged_bytes != self._next_payload_bytes:
return None
self._receiving = False
self._next_payload_bytes = 0
if self._sensors:
self._sensors.bytes_received.record(4 + self._rbuffer.tell())
self._rbuffer.seek(0)
response = self._process_response(self._rbuffer)
self._rbuffer.seek(0)
self._rbuffer.truncate()
return response
def _recv(self):
# Not receiving is the state of reading the payload header
if not self._receiving:
try:
bytes_to_read = 4 - self._rbuffer.tell()
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error receiving 4-byte payload header -'
' closing socket', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
if self._rbuffer.tell() == 4:
self._rbuffer.seek(0)
self._next_payload_bytes = Int32.decode(self._rbuffer)
# reset buffer and switch state to receiving payload bytes
self._rbuffer.seek(0)
self._rbuffer.truncate()
self._receiving = True
elif self._rbuffer.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
staged_bytes = self._rbuffer.tell()
try:
bytes_to_read = self._next_payload_bytes - staged_bytes
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if bytes_to_read and not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
# Extremely small chance that we have exactly 4 bytes for a
# header, but nothing to read in the body yet
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error in recv', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
staged_bytes = self._rbuffer.tell()
if staged_bytes > self._next_payload_bytes:
self.close(error=Errors.KafkaError('Receive buffer has more bytes than expected?'))
if staged_bytes != self._next_payload_bytes:
return None
self._receiving = False
self._next_payload_bytes = 0
if self._sensors:
self._sensors.bytes_received.record(4 + self._rbuffer.tell())
self._rbuffer.seek(0)
response = self._process_response(self._rbuffer)
self._rbuffer.seek(0)
self._rbuffer.truncate()
return response
def recv(self, timeout=0):
"""Non-blocking network receive.
Return response if available
"""
assert not self._processing, 'Recursion not supported'
if not self.connected():
log.warning('%s cannot recv: socket not connected', self)
# If requests are pending, we should close the socket and
# fail all the pending request futures
if self.in_flight_requests:
self.close()
return None
elif not self.in_flight_requests:
log.warning('%s: No in-flight-requests to recv', self)
return None
elif self._requests_timed_out():
log.warning('%s timed out after %s ms. Closing connection.',
self, self.config['request_timeout_ms'])
self.close(error=Errors.RequestTimedOutError(
'Request timed out after %s ms' %
self.config['request_timeout_ms']))
return None
readable, _, _ = select([self._sock], [], [], timeout)
if not readable:
return None
# Not receiving is the state of reading the payload header
if not self._receiving:
try:
# An extremely small, but non-zero, probability that there are
# more than 0 but not yet 4 bytes available to read
self._rbuffer.write(self._sock.recv(4 - self._rbuffer.tell()))
except ConnectionError as e:
if six.PY2 and e.errno == errno.EWOULDBLOCK:
# This shouldn't happen after selecting above
# but just in case
return None
log.exception('%s: Error receiving 4-byte payload header -'
' closing socket', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
if self._rbuffer.tell() == 4:
self._rbuffer.seek(0)
self._next_payload_bytes = Int32.decode(self._rbuffer)
# reset buffer and switch state to receiving payload bytes
self._rbuffer.seek(0)
self._rbuffer.truncate()
self._receiving = True
elif self._rbuffer.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
staged_bytes = self._rbuffer.tell()
try:
self._rbuffer.write(self._sock.recv(self._next_payload_bytes - staged_bytes))
except ConnectionError as e:
# Extremely small chance that we have exactly 4 bytes for a
# header, but nothing to read in the body yet
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error in recv', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
staged_bytes = self._rbuffer.tell()
if staged_bytes > self._next_payload_bytes:
self.close(error=Errors.KafkaError('Receive buffer has more bytes than expected?'))
if staged_bytes != self._next_payload_bytes:
return None
self._receiving = False
self._next_payload_bytes = 0
self._rbuffer.seek(0)
response = self._process_response(self._rbuffer)
self._rbuffer.seek(0)
self._rbuffer.truncate()
return response
def recv(self):
"""Non-blocking network receive.
Return response if available
"""
assert not self._processing, 'Recursion not supported'
if not self.connected():
log.warning('%s cannot recv: socket not connected', self)
# If requests are pending, we should close the socket and
# fail all the pending request futures
if self.in_flight_requests:
self.close()
return None
elif not self.in_flight_requests:
log.warning('%s: No in-flight-requests to recv', self)
return None
elif self._requests_timed_out():
log.warning('%s timed out after %s ms. Closing connection.',
self, self.config['request_timeout_ms'])
self.close(error=Errors.RequestTimedOutError(
'Request timed out after %s ms' %
self.config['request_timeout_ms']))
return None
# Not receiving is the state of reading the payload header
if not self._receiving:
try:
bytes_to_read = 4 - self._rbuffer.tell()
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error receiving 4-byte payload header -'
' closing socket', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
if self._rbuffer.tell() == 4:
self._rbuffer.seek(0)
self._next_payload_bytes = Int32.decode(self._rbuffer)
# reset buffer and switch state to receiving payload bytes
self._rbuffer.seek(0)
self._rbuffer.truncate()
self._receiving = True
elif self._rbuffer.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
staged_bytes = self._rbuffer.tell()
try:
bytes_to_read = self._next_payload_bytes - staged_bytes
data = self._sock.recv(bytes_to_read)
# We expect socket.recv to raise an exception if there is not
# enough data to read the full bytes_to_read
# but if the socket is disconnected, we will get empty data
# without an exception raised
if not data:
log.error('%s: socket disconnected', self)
self.close(error=Errors.ConnectionError('socket disconnected'))
return None
self._rbuffer.write(data)
except ssl.SSLWantReadError:
return None
except ConnectionError as e:
# Extremely small chance that we have exactly 4 bytes for a
# header, but nothing to read in the body yet
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error in recv', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
staged_bytes = self._rbuffer.tell()
if staged_bytes > self._next_payload_bytes:
self.close(error=Errors.KafkaError('Receive buffer has more bytes than expected?'))
if staged_bytes != self._next_payload_bytes:
return None
self._receiving = False
self._next_payload_bytes = 0
self._rbuffer.seek(0)
response = self._process_response(self._rbuffer)
self._rbuffer.seek(0)
self._rbuffer.truncate()
return response
def recv(self, timeout=0):
"""Non-blocking network receive.
Return response if available
"""
assert not self._processing, 'Recursion not supported'
if not self.connected():
log.warning('%s cannot recv: socket not connected', self)
# If requests are pending, we should close the socket and
# fail all the pending request futures
if self.in_flight_requests:
self.close()
return None
elif not self.in_flight_requests:
log.warning('%s: No in-flight-requests to recv', self)
return None
elif self._requests_timed_out():
log.warning('%s timed out after %s ms. Closing connection.',
self, self.config['request_timeout_ms'])
self.close(error=Errors.RequestTimedOutError(
'Request timed out after %s ms' %
self.config['request_timeout_ms']))
return None
readable, _, _ = select([self._sock], [], [], timeout)
if not readable:
return None
# Not receiving is the state of reading the payload header
if not self._receiving:
try:
# An extremely small, but non-zero, probability that there are
# more than 0 but not yet 4 bytes available to read
self._rbuffer.write(self._sock.recv(4 - self._rbuffer.tell()))
except ConnectionError as e:
if six.PY2 and e.errno == errno.EWOULDBLOCK:
# This shouldn't happen after selecting above
# but just in case
return None
log.exception('%s: Error receiving 4-byte payload header -'
' closing socket', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
if self._rbuffer.tell() == 4:
self._rbuffer.seek(0)
self._next_payload_bytes = Int32.decode(self._rbuffer)
# reset buffer and switch state to receiving payload bytes
self._rbuffer.seek(0)
self._rbuffer.truncate()
self._receiving = True
elif self._rbuffer.tell() > 4:
raise Errors.KafkaError('this should not happen - are you threading?')
if self._receiving:
staged_bytes = self._rbuffer.tell()
try:
self._rbuffer.write(self._sock.recv(self._next_payload_bytes - staged_bytes))
except ConnectionError as e:
# Extremely small chance that we have exactly 4 bytes for a
# header, but nothing to read in the body yet
if six.PY2 and e.errno == errno.EWOULDBLOCK:
return None
log.exception('%s: Error in recv', self)
self.close(error=Errors.ConnectionError(e))
return None
except BlockingIOError:
if six.PY3:
return None
raise
staged_bytes = self._rbuffer.tell()
if staged_bytes > self._next_payload_bytes:
self.close(error=Errors.KafkaError('Receive buffer has more bytes than expected?'))
if staged_bytes != self._next_payload_bytes:
return None
self._receiving = False
self._next_payload_bytes = 0
self._rbuffer.seek(0)
response = self._process_response(self._rbuffer)
self._rbuffer.seek(0)
self._rbuffer.truncate()
return response
