def main(cls):
""" Main fuzzing routine.
:return:
"""
args = cls.parse_args()
conf = cls.parse_config()
logger = cls.logger(levels[args.log_level], "tPortmapd.fuzz", "./session.log")
victim = args.target_addr
port = args.target_port
version = args.target_version
vmrun = conf.get("VMWARE", "vmrun")
vmx = conf.get("VMWARE", "vm_path")
snapshot_name = conf.get("VMWARE", "snapshot")
web_port = conf.getint("KITTY", "web_port")
to_log = "Started VxWorks {}.x fuzzing session\n".format(version)
to_log += "Target:\n\tip address: {}\n\tport: {}\n".format(victim, port)
to_log += "VM: {}\nsnapshot: {}\n".format(vmx, snapshot_name)
logger.info(to_log)
# Define target
target = TcpTarget("tPortmapd", logger=logger, host=victim, port=port, timeout=2)
# Define the controller
controller = VmWareController(name="VMWare Controller", logger=logger, vmrun_path=vmrun, vmx_path=vmx,
snap_name=snapshot_name, target_addr=victim, target_port=port)
target.set_controller(controller)
# Define the monitor
monitor = VxWorksProcessMonitor(name="VxWorks Process Monitor", logger=logger, target_addr=victim,
target_version=version)
target.add_monitor(monitor)
# Define the model
model = GraphModel()
model.connect(portmap_proc_null)
# Define the fuzzing session
fuzzer = ServerFuzzer(name="PortmapFuzzer", logger=logger)
fuzzer.set_interface(WebInterface(port=web_port))
fuzzer.set_model(model)
fuzzer.set_target(target)
fuzzer.set_delay_between_tests(0)
# Start!
try:
fuzzer.start()
except KeyboardInterrupt:
logger.info("Session interrupted by user...")
fuzzer.stop()
return 1
except Exception as exc:
logger.error(exc)
fuzzer.stop()
return -1
def mod(ics_ip):
print ">>>>> ICS FUZZING MODULE <<<<<\n"
# 定义目标Fuzz对象的IP地址
TARGET_IP = ics_ip
# 定义目标Fuzz对象的通讯端口
TARGET_PORT = 502
# 定义随机数种子
RANDSEED = int(RandShort())
# 根据ISF中Modbus-tcp协议的数据结构构造测试数据包,下面例子中将使用RandShort对请求的地址及bit位长度进行测试
write_coils_request_packet = ModbusHeaderRequest(
func_code=0x05) / WriteSingleCoilRequest(ReferenceNumber=RandShort(),
Value=RandShort())
# 使用ScapyField直接将Scapy的数据包结构应用于Kitty框架中
write_coils_request_packet_template = Template(
name='Write Coils Request',
fields=[
ScapyField(
write_coils_request_packet,
name='wrire_coils_request_packet', # 定义这个Field的名字，用于在报告中显示
fuzzable=True, # 定义这个Field是否需要Fuzz
seed=RANDSEED, # 定义用于变异的随机数
fuzz_count=2000 # 这个数据结构的fuzz次数
),
])
# 使用GraphModel进行Fuzz
model = GraphModel()
# 在使用GraphModel中注册第一个节点，由于Modbus的Read Coils请求是单次的请求/回答形式，因此这里只要注册简单的一个节点即可
model.connect(write_coils_request_packet_template)
# 定义一个目标Target, 设置IP、端口及连接超时时间
modbus_target = TcpTarget(name='modbus target',
host=TARGET_IP,
port=TARGET_PORT,
timeout=2)
# 定义是需要等待Target返回响应，如果设置为True Target不返回数据包则会被识别成异常进行记录。
modbus_target.set_expect_response(True)
# 定义使用ServerFuzzer的方式进行Fuzz测试
fuzzer = ServerFuzzer()
# 定义fuzzer使用的交互界面为web界面
fuzzer.set_interface(WebInterface(port=26001))
# 在fuzzer中定义使用GraphModel
fuzzer.set_model(model)
# 在fuzzer中定义target为modbus_target
fuzzer.set_target(modbus_target)
# 定义每个测试用例发送之间的延迟
fuzzer.set_delay_between_tests(0.1)
# 开始执行Fuzz
fuzzer.start()
def fuzzing(host, port, template):
# Define target
target = TcpTarget('HTTP', host, int(port), timeout=1)
target.set_expect_response(True)
# target.add_monitor(monitor)
# Define model
model = GraphModel()
model.connect(template)
# Define fuzzer
fuzzer = ServerFuzzer()
fuzzer.set_interface(WebInterface(port=4445))
fuzzer.set_delay_between_tests(0.2)
# Run fuzzer
session_name = '%s.sqlite' % time.ctime().replace(' ', '_')
sessions_dbs = os.path.join('/tmp', 'sessions', session_name)
fuzzer.set_session_file(sessions_dbs)
fuzzer.set_store_all_reports('reports')
fuzzer.set_target(target)
fuzzer.set_model(model)
fuzzer.start()
fuzzer.stop()
def fuzzing(host, port, template):
# Define target
monitor = GdbServerMonitor(
name='GdbServerMonitor', gdb_path='gdb-multiarch',
host=host, port=2222,
signals=[signal.SIGSEGV, signal.SIGILL, signal.SIGKILL, signal.SIGTERM]
)
target = TcpTarget('upnp', host, int(port), timeout=1)
target.set_expect_response(True)
target.add_monitor(monitor)
# Define model
model = GraphModel()
model.connect(template)
# Define fuzzer
fuzzer = ServerFuzzer()
fuzzer.set_interface(WebInterface(port=4445))
fuzzer.set_delay_between_tests(0.2)
# Run fuzzer
fuzzer.set_session_file('sessions/%s.sqlite' % time.ctime().replace(' ', '_'))
fuzzer.set_store_all_reports('reports')
fuzzer.set_target(target)
fuzzer.set_model(model)
fuzzer.start()
fuzzer.stop()
class TestServerFuzzer(unittest.TestCase):
def setUp(self):
self.logger = get_test_logger()
self.logger.debug('TESTING METHOD: %s', self._testMethodName)
self.t_str = Template(name='simple_str_template',
fields=[String(name='str1', value='kitty')])
self.t_int = Template(name='simple_int_template',
fields=[UInt32(name='int1', value=0x1234)])
self.fuzzer = None
self.prepare()
def tearDown(self):
if self.fuzzer:
self.fuzzer.stop()
if self.session_file_name:
if os.path.exists(self.session_file_name):
os.remove(self.session_file_name)
def new_model(self):
model = GraphModel()
model.logger = self.logger
model.connect(
Template(name='simple_str_template',
fields=[String(name='str1', value='kitty')]))
return model
def prepare(self):
self.start_index = 10
self.end_index = 20
self.delay_duration = 0
self.session_file_name = None
self.interface = EmptyInterface()
self.model = self.new_model()
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.fuzzer.set_delay_between_tests(self.delay_duration)
def testRaisesExceptionWhenStartedWithoutModel(self):
self.fuzzer.set_model(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testRaisesExceptionWhenStartedWithoutTarget(self):
self.fuzzer.set_target(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testRaisesExceptionWhenStartedWithoutInterface(self):
self.fuzzer.set_interface(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testCommandLineArgumentDelay(self):
self.delay_duration = 0.1
cmd_line = '--delay=%s' % self.delay_duration
self.fuzzer = ServerFuzzer(name="TestServerFuzzer",
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.assertEqual(self.delay_duration, self.fuzzer.config.delay_secs)
start_time = time.time()
self.fuzzer.start()
end_time = time.time()
expected_runtime = self.delay_duration * (self.end_index -
self.start_index + 1)
actual_runtime = end_time - start_time
self.assertAlmostEqual(int(actual_runtime), int(expected_runtime))
def testCommandLineArgumentSession(self):
self.session_file_name = 'mysession.sqlite'
cmd_line = '--session=%s' % self.session_file_name
self.fuzzer = ServerFuzzer(name="TestServerFuzzer",
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_delay_between_tests(self.delay_duration)
self.fuzzer.set_range(self.start_index, self.end_index)
self.assertEqual(self.session_file_name,
self.fuzzer.config.session_file_name)
self.fuzzer.start()
def testCommandLineArgumentTestList(self):
cmd_line = '--test-list=%s' % (','.join(str(i) for i in [1, 3, 5, 7]))
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.start()
# check what tests were started by the fuzzer
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [-1, 1, 3, 5, 7])
def testCommandLineArgumentNoEnvTest(self):
cmd_line = '--test-list=%s' % (','.join(str(i) for i in [1, 3, 5, 7]))
cmd_line += ' --no-env-test'
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.start()
# check what tests were started by the fuzzer
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [1, 3, 5, 7])
def testMaxFailures(self):
target_config = {
'1': {
'send': {
"raise exception": True
}
},
'2': {
'send': {
"raise exception": True
}
},
'3': {
'send': {
"raise exception": True
}
},
}
self.target = ServerTargetMock(target_config, logger=self.logger)
cmd_line = '--test-list=0-10'
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_max_failures(3)
self.fuzzer.start()
# check what tests were started by the fuzzer
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [-1, 0, 1, 2, 3])
def testSessionResume(self):
session_file_name = 'testSessionResume.session'
try:
os.remove(session_file_name)
except:
pass
self.logger.info(
'Make the fuzzer stop after 2 tests by reaching max failures')
target_config = {
'1': {
'send': {
"raise exception": True
}
},
}
self.target = ServerTargetMock(target_config, logger=self.logger)
cmd_line = '--test-list=0-10 --session=%s' % (session_file_name)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.set_max_failures(1)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [-1, 0, 1])
self.fuzzer.stop()
self.logger.info(
'Now use the same session file to run from where we have stopped')
cmd_line = '--session=%s --no-env-test' % (session_file_name)
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, list(range(2, 11)))
os.remove(session_file_name)
def testRetest(self):
session_file_name = 'testSessionResume.session'
try:
os.remove(session_file_name)
except:
pass
self.logger.info(
'Make the fuzzer stop after 2 tests by reaching max failures')
target_config = {
'1': {
'send': {
"raise exception": True
}
},
'3': {
'send': {
"raise exception": True
}
},
'5': {
'send': {
"raise exception": True
}
},
}
self.target = ServerTargetMock(target_config, logger=self.logger)
cmd_line = '--test-list=0-10 --session=%s' % (session_file_name)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, list(range(-1, 11)))
self.fuzzer.stop()
self.logger.info('Now use the same session file to rerun failed tests')
cmd_line = '--retest=%s --no-env-test' % (session_file_name)
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer',
logger=self.logger,
option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [1, 3, 5])
os.remove(session_file_name)
def testVanilla(self):
self.fuzzer.start()
info = self.fuzzer._get_session_info()
# reports = self.fuzzer._get_reports_manager()
# self.assertEqual(len(reports), 0)
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, None)
# self.assertEqual(info.original_start_index, 10)
self.assertEqual(info.start_index, self.start_index)
self.assertEqual(info.end_index, self.end_index)
def testStartingFromStartIndex(self):
start_index = self.model.num_mutations() - 2
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.current_index, None)
self.assertEqual(info.end_index, self.model.last_index())
def testEndingAtEndIndex(self):
start_index = 0
end_index = 3
self.fuzzer.set_range(start_index, end_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, 3)
self.assertEqual(info.current_index, None)
def testFullMutationRange(self):
self.fuzzer.set_range()
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, self.model.last_index())
self.assertEqual(info.current_index, None)
def _MOVE_TO_TARGET_TESTS_test_send_failure(self):
config = {'12': {'send': {"raise exception": True}}}
send_error_target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(send_error_target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer._get_reports_manager()
self.assertEqual(len(reports), 1)
self.assertTrue(12 in reports)
self.assertEqual(info.failure_count, 1)
def testTestFailedWhenReportIsFailed(self):
config = {
'13': {
'report': {
'status': 'failed',
'reason': 'failure reason'
}
}
}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
self.assertEqual(reports, [int(x) for x in config.keys()])
self.assertEqual(info.failure_count, len(config))
def testAllFailedTestsHaveReports(self):
config = {
'10': {
'report': {
'status': 'failed',
'reason': 'failure reason'
}
},
'11': {
'report': {
'status': 'failed',
'reason': 'failure reason'
}
},
'12': {
'report': {
'status': 'failed',
'reason': 'failure reason'
}
},
'13': {
'report': {
'status': 'failed',
'reason': 'failure reason'
}
}
}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
self.assertEqual(reports, sorted([int(x) for x in config.keys()]))
self.assertEqual(info.failure_count, len(config))
def testStoringAllReportsWhenStoreAllReportsIsSetToTrue(self):
config = {}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_store_all_reports(True)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
expected_mutation_count = self.end_index - self.start_index + 1
expected_failure_count = 0
self.assertEqual(len(reports), expected_mutation_count)
self.assertEqual(info.failure_count, expected_failure_count)
def testOnlyTestsInSetRangeAreExecuted(self):
start_index = self.model.num_mutations() - 5
self.model.connect(self.t_str, self.t_int)
expected_end_index = self.model.last_index()
# expected_num_mutations = expected_end_index - start_index
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, None)
self.assertEqual(info.start_index, start_index)
self.assertEqual(info.end_index, expected_end_index)
def testCallbackIsCalledBetweenTwoNodes(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
self.cb_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations(), self.cb_call_count)
def testCorrectCallbackIsCalledForEachEdge(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
template3 = Template(name='template3', fields=String('str3'))
self.cb2_call_count = 0
self.cb3_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb2_call_count += 1
def t1_t3_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template3)
self.cb3_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
model.connect(template1, template3, t1_t3_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations(), self.cb2_call_count)
self.assertEqual(template3.num_mutations(), self.cb3_call_count)
def testCorrectCallbackIsCalledForAllEdgesInPath(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
template3 = Template(name='template3', fields=String('str3'))
self.cb2_call_count = 0
self.cb3_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb2_call_count += 1
def t2_t3_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template2)
self.assertEqual(edge.dst, template3)
self.cb3_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
model.connect(template2, template3, t2_t3_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations() + template3.num_mutations(),
self.cb2_call_count)
self.assertEqual(template3.num_mutations(), self.cb3_call_count)
fuzzer.logger.info('session is: %s' % resp[1:3].encode('hex'))
fuzzer.target.session_data['session_id'] = resp[1:3]
# Define session target
target = TcpTarget(name='session_test_target',
host=target_ip,
port=target_port,
timeout=2)
# Make target expect response
target.set_expect_response(True)
# Define controller
controller = SessionServerController(name='ServerController',
host=target_ip,
port=target_port)
target.set_controller(controller)
# Define model
model = GraphModel()
model.connect(get_session)
model.connect(get_session, send_data, new_session_callback)
# Define fuzzer
fuzzer = ServerFuzzer()
fuzzer.set_interface(WebInterface(port=web_port))
fuzzer.set_model(model)
fuzzer.set_target(target)
fuzzer.set_delay_between_tests(0.2)
fuzzer.start()
class TestServerFuzzer(unittest.TestCase):
def setUp(self):
self.logger = get_test_logger()
self.logger.debug('TESTING METHOD: %s', self._testMethodName)
self.t_str = Template(name='simple_str_template', fields=[String(name='str1', value='kitty')])
self.t_int = Template(name='simple_int_template', fields=[UInt32(name='int1', value=0x1234)])
self.fuzzer = None
self.prepare()
def tearDown(self):
if self.fuzzer:
self.fuzzer.stop()
if self.session_file_name:
if os.path.exists(self.session_file_name):
os.remove(self.session_file_name)
def prepare(self):
self.start_index = 10
self.end_index = 20
self.delay_duration = 0
self.session_file_name = None
self.interface = EmptyInterface()
self.model = GraphModel()
self.model.logger = self.logger
self.model.connect(self.t_str)
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.fuzzer.set_delay_between_tests(self.delay_duration)
def testRaisesExceptionWhenStartedWithoutModel(self):
self.fuzzer.set_model(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testRaisesExceptionWhenStartedWithoutTarget(self):
self.fuzzer.set_target(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testRaisesExceptionWhenStartedWithoutInterface(self):
self.fuzzer.set_interface(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testCommandLineArgumentsStart(self):
self.start_index = 10
cmd_line = '--start=%d' % self.start_index
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_delay_between_tests(self.delay_duration)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.current_index, self.model.last_index())
self.assertEqual(info.start_index, self.start_index)
def testCommandLineArgumentsEnd(self):
self.end_index = 10
cmd_line = '--end=%d' % self.end_index
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_delay_between_tests(self.delay_duration)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, self.end_index)
self.assertEqual(info.current_index, self.end_index)
def testCommandLineArgumentDelay(self):
self.delay_duration = 0.1
cmd_line = '--delay=%s' % self.delay_duration
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.assertEqual(self.delay_duration, self.fuzzer.config.delay_secs)
start_time = time.time()
self.fuzzer.start()
end_time = time.time()
expected_runtime = self.delay_duration * (self.end_index - self.start_index + 1)
actual_runtime = end_time - start_time
self.assertAlmostEqual(int(actual_runtime), int(expected_runtime))
def testCommandLineArgumentSession(self):
self.session_file_name = 'mysession.sqlite'
cmd_line = '--session=%s' % self.session_file_name
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_delay_between_tests(self.delay_duration)
self.fuzzer.set_range(self.start_index, self.end_index)
self.assertEqual(self.session_file_name, self.fuzzer.config.session_file_name)
self.fuzzer.start()
def testVanilla(self):
self.fuzzer.start()
info = self.fuzzer._get_session_info()
# reports = self.fuzzer._get_reports_manager()
# self.assertEqual(len(reports), 0)
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, self.end_index)
# self.assertEqual(info.original_start_index, 10)
self.assertEqual(info.start_index, self.start_index)
self.assertEqual(info.end_index, self.end_index)
mutations_tested = info.current_index - info.start_index
self.assertEqual(mutations_tested, self.end_index - self.start_index)
def testStartingFromStartIndex(self):
start_index = self.model.num_mutations() - 2
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.current_index, self.model.last_index())
self.assertEqual(info.end_index, self.model.last_index())
def testEndingAtEndIndex(self):
start_index = 0
end_index = 3
self.fuzzer.set_range(start_index, end_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, 3)
self.assertEqual(info.current_index, 3)
def testFullMutationRange(self):
self.fuzzer.set_range()
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, self.model.last_index())
self.assertEqual(info.current_index, self.model.last_index())
def _MOVE_TO_TARGET_TESTS_test_send_failure(self):
config = {
'12': {
'send': {"raise exception": True}
}
}
send_error_target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(send_error_target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer._get_reports_manager()
self.assertEqual(len(reports), 1)
self.assertTrue(12 in reports)
self.assertEqual(info.failure_count, 1)
def testTestFailedWhenReportIsFailed(self):
config = {
'13': {
'report': {
'status': 'failed', 'reason': 'failure reason'
}
}
}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
self.assertEqual(reports, [int(x) for x in config.keys()])
self.assertEqual(info.failure_count, len(config))
def testAllFailedTestsHaveReports(self):
config = {
'10': {'report': {'status': 'failed', 'reason': 'failure reason'}},
'11': {'report': {'status': 'failed', 'reason': 'failure reason'}},
'12': {'report': {'status': 'failed', 'reason': 'failure reason'}},
'13': {'report': {'status': 'failed', 'reason': 'failure reason'}}
}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
self.assertEqual(reports, sorted([int(x) for x in config.keys()]))
self.assertEqual(info.failure_count, len(config))
def testStoringAllReportsWhenStoreAllReportsIsSetToTrue(self):
config = {}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_store_all_reports(True)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
expected_mutation_count = self.end_index - self.start_index + 1
expected_failure_count = 0
self.assertEqual(len(reports), expected_mutation_count)
self.assertEqual(info.failure_count, expected_failure_count)
def testOnlyTestsInSetRangeAreExecuted(self):
start_index = self.model.num_mutations() - 5
self.model.connect(self.t_str, self.t_int)
expected_end_index = self.model.last_index()
expected_num_mutations = expected_end_index - start_index
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, expected_end_index)
mutations_tested = info.current_index - info.start_index
self.assertEqual(mutations_tested, expected_num_mutations)
self.assertEqual(info.start_index, start_index)
self.assertEqual(info.end_index, expected_end_index)
def testCallbackIsCalledBetweenTwoNodes(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
self.cb_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations(), self.cb_call_count)
def testCorrectCallbackIsCalledForEachEdge(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
template3 = Template(name='template3', fields=String('str3'))
self.cb2_call_count = 0
self.cb3_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb2_call_count += 1
def t1_t3_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template3)
self.cb3_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
model.connect(template1, template3, t1_t3_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations(), self.cb2_call_count)
self.assertEqual(template3.num_mutations(), self.cb3_call_count)
def testCorrectCallbackIsCalledForAllEdgesInPath(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
template3 = Template(name='template3', fields=String('str3'))
self.cb2_call_count = 0
self.cb3_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb2_call_count += 1
def t2_t3_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template2)
self.assertEqual(edge.dst, template3)
self.cb3_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
model.connect(template2, template3, t2_t3_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations() + template3.num_mutations(), self.cb2_call_count)
self.assertEqual(template3.num_mutations(), self.cb3_call_count)
edge.src is the get_session template
edge.dst is the send_data template
:param resp: the response from the target
"""
fuzzer.logger.info("session is: %s" % resp[1:3].encode("hex"))
fuzzer.target.session_data["session_id"] = resp[1:3]
# Define session target
target = TcpTarget(name="session_test_target", host=target_ip, port=target_port, timeout=2)
# Make target expect response
target.set_expect_response(True)
# Define controller
controller = SessionServerController(name="ServerController", host=target_ip, port=target_port)
target.set_controller(controller)
# Define model
model = GraphModel()
model.connect(get_session)
model.connect(get_session, send_data, new_session_callback)
# Define fuzzer
fuzzer = ServerFuzzer()
fuzzer.set_interface(WebInterface(port=web_port))
fuzzer.set_model(model)
fuzzer.set_target(target)
fuzzer.set_delay_between_tests(0.2)
fuzzer.start()
def s7(ics_ip):
print ">>>>> ICS FUZZING MODULE <<<<<\n"
# snap7 server 配置信息
TARGET_IP = ics_ip
TARGET_PORT = 102
RANDSEED = int(RandShort())
SRC_TSAP = "0100".encode('hex')
DST_TSAP = "0103".encode('hex')
# 定义COTP CR建立连接数据包
COTP_CR_PACKET = TPKT() / COTPCR()
COTP_CR_PACKET.Parameters = [COTPOption() for i in range(3)]
COTP_CR_PACKET.PDUType = "CR"
COTP_CR_PACKET.Parameters[0].ParameterCode = "tpdu-size"
COTP_CR_PACKET.Parameters[0].Parameter = "\x0a"
COTP_CR_PACKET.Parameters[1].ParameterCode = "src-tsap"
COTP_CR_PACKET.Parameters[2].ParameterCode = "dst-tsap"
COTP_CR_PACKET.Parameters[1].Parameter = SRC_TSAP
COTP_CR_PACKET.Parameters[2].Parameter = DST_TSAP
# 因为是建立连接使用，因此fuzzable参数需要设置为False避免数据包被变异破坏
COTP_CR_TEMPLATE = Template(name='cotp cr template',
fields=[
ScapyField(COTP_CR_PACKET,
name='cotp cr',
fuzzable=False),
])
# 定义通讯参数配置数据结构
SETUP_COMM_PARAMETER_PACKET = TPKT() / COTPDT(EOT=1) / S7Header(
ROSCTR="Job", Parameters=S7SetConParameter())
SETUP_COMM_PARAMETER_TEMPLATE = Template(
name='setup comm template',
fields=[
ScapyField(SETUP_COMM_PARAMETER_PACKET,
name='setup comm',
fuzzable=False),
])
# 定义需要Fuzzing的数据包结构, 下面例子中将使用RandShort对请求的SZLId及SZLIndex值进行变异测试
READ_SZL_PACKET = TPKT() / COTPDT(EOT=1) / S7Header(
ROSCTR="UserData",
Parameters=S7ReadSZLParameterReq(),
Data=S7ReadSZLDataReq(SZLId=RandShort(), SZLIndex=RandShort()))
# 定义READ_SZL_TEMPLATE为可以进行变异的结构，fuzzing的次数为1000次
READ_SZL_TEMPLATE = Template(name='read szl template',
fields=[
ScapyField(READ_SZL_PACKET,
name='read szl',
fuzzable=True,
fuzz_count=1000),
])
# 使用GraphModel进行Fuzz
model = GraphModel()
# 在使用GraphModel中注册第一个节点, 首先发送COTP_CR请求。
model.connect(COTP_CR_TEMPLATE)
# 在使用GraphModel中注册第二个节点, 在发送完COTP_CR后发送SETUP_COMM_PARAMETER请求
model.connect(COTP_CR_TEMPLATE, SETUP_COMM_PARAMETER_TEMPLATE)
# 在使用GraphModel中注册第三个节点, 在发送完SETUP_COMM_PARAMETER后发送READ_SZL请求
model.connect(SETUP_COMM_PARAMETER_TEMPLATE, READ_SZL_TEMPLATE)
# define target
s7comm_target = TcpTarget(name='s7comm target',
host=TARGET_IP,
port=TARGET_PORT,
timeout=2)
# 定义是需要等待Target返回响应，如果设置为True Target不返回数据包则会被识别成异常进行记录
s7comm_target.set_expect_response(True)
# 定义使用基础的ServerFuzzer进行Fuzz测试
fuzzer = ServerFuzzer()
# 定义fuzzer使用的交互界面为web界面
fuzzer.set_interface(WebInterface(port=26001))
# 在fuzzer中定义使用GraphModel
fuzzer.set_model(model)
# 在fuzzer中定义target为s7comm_target
fuzzer.set_target(s7comm_target)
# 定义每个测试用例发送之间的延迟
fuzzer.set_delay_between_tests(0.1)
# 开始执行Fuzz
fuzzer.start()
class TestServerFuzzer(unittest.TestCase):
def setUp(self):
self.logger = get_test_logger()
self.logger.debug('TESTING METHOD: %s', self._testMethodName)
self.t_str = Template(name='simple_str_template', fields=[String(name='str1', value='kitty')])
self.t_int = Template(name='simple_int_template', fields=[UInt32(name='int1', value=0x1234)])
self.fuzzer = None
self.prepare()
def tearDown(self):
if self.fuzzer:
self.fuzzer.stop()
if self.session_file_name:
if os.path.exists(self.session_file_name):
os.remove(self.session_file_name)
def new_model(self):
model = GraphModel()
model.logger = self.logger
model.connect(
Template(name='simple_str_template', fields=[String(name='str1', value='kitty')])
)
return model
def prepare(self):
self.start_index = 10
self.end_index = 20
self.delay_duration = 0
self.session_file_name = None
self.interface = EmptyInterface()
self.model = self.new_model()
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.fuzzer.set_delay_between_tests(self.delay_duration)
def testRaisesExceptionWhenStartedWithoutModel(self):
self.fuzzer.set_model(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testRaisesExceptionWhenStartedWithoutTarget(self):
self.fuzzer.set_target(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testRaisesExceptionWhenStartedWithoutInterface(self):
self.fuzzer.set_interface(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def testCommandLineArgumentDelay(self):
self.delay_duration = 0.1
cmd_line = '--delay=%s' % self.delay_duration
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.assertEqual(self.delay_duration, self.fuzzer.config.delay_secs)
start_time = time.time()
self.fuzzer.start()
end_time = time.time()
expected_runtime = self.delay_duration * (self.end_index - self.start_index + 1)
actual_runtime = end_time - start_time
self.assertAlmostEqual(int(actual_runtime), int(expected_runtime))
def testCommandLineArgumentSession(self):
self.session_file_name = 'mysession.sqlite'
cmd_line = '--session=%s' % self.session_file_name
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_delay_between_tests(self.delay_duration)
self.fuzzer.set_range(self.start_index, self.end_index)
self.assertEqual(self.session_file_name, self.fuzzer.config.session_file_name)
self.fuzzer.start()
def testCommandLineArgumentTestList(self):
cmd_line = '--test-list=%s' % (','.join(str(i) for i in [1, 3, 5, 7]))
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.start()
# check what tests were started by the fuzzer
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [-1, 1, 3, 5, 7])
def testCommandLineArgumentNoEnvTest(self):
cmd_line = '--test-list=%s' % (','.join(str(i) for i in [1, 3, 5, 7]))
cmd_line += ' --no-env-test'
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.start()
# check what tests were started by the fuzzer
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [1, 3, 5, 7])
def testMaxFailures(self):
target_config = {
'1': {'send': {"raise exception": True}},
'2': {'send': {"raise exception": True}},
'3': {'send': {"raise exception": True}},
}
self.target = ServerTargetMock(target_config, logger=self.logger)
cmd_line = '--test-list=0-10'
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.model)
self.fuzzer.set_target(self.target)
self.fuzzer.set_max_failures(3)
self.fuzzer.start()
# check what tests were started by the fuzzer
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [-1, 0, 1, 2, 3])
def testSessionResume(self):
session_file_name = 'testSessionResume.session'
try:
os.remove(session_file_name)
except:
pass
self.logger.info('Make the fuzzer stop after 2 tests by reaching max failures')
target_config = {
'1': {'send': {"raise exception": True}},
}
self.target = ServerTargetMock(target_config, logger=self.logger)
cmd_line = '--test-list=0-10 --session=%s' % (session_file_name)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.set_max_failures(1)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [-1, 0, 1])
self.fuzzer.stop()
self.logger.info('Now use the same session file to run from where we have stopped')
cmd_line = '--session=%s --no-env-test' % (session_file_name)
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, range(2, 11))
os.remove(session_file_name)
def testRetest(self):
session_file_name = 'testSessionResume.session'
try:
os.remove(session_file_name)
except:
pass
self.logger.info('Make the fuzzer stop after 2 tests by reaching max failures')
target_config = {
'1': {'send': {"raise exception": True}},
'3': {'send': {"raise exception": True}},
'5': {'send': {"raise exception": True}},
}
self.target = ServerTargetMock(target_config, logger=self.logger)
cmd_line = '--test-list=0-10 --session=%s' % (session_file_name)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, range(-1, 11))
self.fuzzer.stop()
self.logger.info('Now use the same session file to rerun failed tests')
cmd_line = '--retest=%s --no-env-test' % (session_file_name)
self.target = ServerTargetMock({}, logger=self.logger)
self.fuzzer = ServerFuzzer(name='TestServerFuzzer', logger=self.logger, option_line=cmd_line)
self.fuzzer.set_interface(self.interface)
self.fuzzer.set_model(self.new_model())
self.fuzzer.set_target(self.target)
self.fuzzer.start()
pre_test_list = self.target.instrument.list_get('pre_test')
self.assertListEqual(pre_test_list, [1, 3, 5])
os.remove(session_file_name)
def testVanilla(self):
self.fuzzer.start()
info = self.fuzzer._get_session_info()
# reports = self.fuzzer._get_reports_manager()
# self.assertEqual(len(reports), 0)
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, None)
# self.assertEqual(info.original_start_index, 10)
self.assertEqual(info.start_index, self.start_index)
self.assertEqual(info.end_index, self.end_index)
def testStartingFromStartIndex(self):
start_index = self.model.num_mutations() - 2
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.current_index, None)
self.assertEqual(info.end_index, self.model.last_index())
def testEndingAtEndIndex(self):
start_index = 0
end_index = 3
self.fuzzer.set_range(start_index, end_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, 3)
self.assertEqual(info.current_index, None)
def testFullMutationRange(self):
self.fuzzer.set_range()
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, self.model.last_index())
self.assertEqual(info.current_index, None)
def _MOVE_TO_TARGET_TESTS_test_send_failure(self):
config = {
'12': {
'send': {"raise exception": True}
}
}
send_error_target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(send_error_target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer._get_reports_manager()
self.assertEqual(len(reports), 1)
self.assertTrue(12 in reports)
self.assertEqual(info.failure_count, 1)
def testTestFailedWhenReportIsFailed(self):
config = {
'13': {
'report': {
'status': 'failed', 'reason': 'failure reason'
}
}
}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
self.assertEqual(reports, [int(x) for x in config.keys()])
self.assertEqual(info.failure_count, len(config))
def testAllFailedTestsHaveReports(self):
config = {
'10': {'report': {'status': 'failed', 'reason': 'failure reason'}},
'11': {'report': {'status': 'failed', 'reason': 'failure reason'}},
'12': {'report': {'status': 'failed', 'reason': 'failure reason'}},
'13': {'report': {'status': 'failed', 'reason': 'failure reason'}}
}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
self.assertEqual(reports, sorted([int(x) for x in config.keys()]))
self.assertEqual(info.failure_count, len(config))
def testStoringAllReportsWhenStoreAllReportsIsSetToTrue(self):
config = {}
target = ServerTargetMock(config, logger=self.logger)
self.fuzzer.set_store_all_reports(True)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer.dataman.get_report_test_ids()
expected_mutation_count = self.end_index - self.start_index + 1
expected_failure_count = 0
self.assertEqual(len(reports), expected_mutation_count)
self.assertEqual(info.failure_count, expected_failure_count)
def testOnlyTestsInSetRangeAreExecuted(self):
start_index = self.model.num_mutations() - 5
self.model.connect(self.t_str, self.t_int)
expected_end_index = self.model.last_index()
expected_num_mutations = expected_end_index - start_index
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, None)
self.assertEqual(info.start_index, start_index)
self.assertEqual(info.end_index, expected_end_index)
def testCallbackIsCalledBetweenTwoNodes(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
self.cb_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations(), self.cb_call_count)
def testCorrectCallbackIsCalledForEachEdge(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
template3 = Template(name='template3', fields=String('str3'))
self.cb2_call_count = 0
self.cb3_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb2_call_count += 1
def t1_t3_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template3)
self.cb3_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
model.connect(template1, template3, t1_t3_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations(), self.cb2_call_count)
self.assertEqual(template3.num_mutations(), self.cb3_call_count)
def testCorrectCallbackIsCalledForAllEdgesInPath(self):
template1 = Template(name='template1', fields=String('str1'))
template2 = Template(name='template2', fields=String('str2'))
template3 = Template(name='template3', fields=String('str3'))
self.cb2_call_count = 0
self.cb3_call_count = 0
def t1_t2_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template1)
self.assertEqual(edge.dst, template2)
self.cb2_call_count += 1
def t2_t3_cb(fuzzer, edge, response):
self.assertEqual(fuzzer, self.fuzzer)
self.assertEqual(edge.src, template2)
self.assertEqual(edge.dst, template3)
self.cb3_call_count += 1
model = GraphModel()
model.logger = self.logger
model.connect(template1)
model.connect(template1, template2, t1_t2_cb)
model.connect(template2, template3, t2_t3_cb)
self.model = model
self.fuzzer.set_model(model)
self.fuzzer.set_range()
self.fuzzer.start()
self.assertEqual(template2.num_mutations() + template3.num_mutations(), self.cb2_call_count)
self.assertEqual(template3.num_mutations(), self.cb3_call_count)
def run_http(self) -> None:
"""
This method provides the HTTP GET, POST, ... , templating for the HTTP header
as fields, data provided by the config, explained in the User Documentation.
kitty low level field model
https://kitty.readthedocs.io/en/latest/kitty.model.low_level.field.html
:returns: None
:rtype: None
"""
http_template = None
# HTTP GET TEMPLATE
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Initiate template for HTTP GET ..."
)
if self.http_get:
http_template = Template(
name='HTTP_GET',
fields=[
# GET / HTTP/1.1
String('GET', name='method', fuzzable=False),
Delimiter(' ', name='delimiter-1', fuzzable=False),
String(self.http_path, name='path'),
Delimiter(' ',
name='delimiter-2',
fuzzable=self.http_fuzz_protocol),
String('HTTP',
name='protocol name',
fuzzable=self.http_fuzz_protocol),
Delimiter('/',
name='fws-1',
fuzzable=self.http_fuzz_protocol),
Dword(1,
name='major version',
encoder=ENC_INT_DEC,
fuzzable=self.http_fuzz_protocol),
Delimiter('.',
name='dot-1',
fuzzable=self.http_fuzz_protocol),
Dword(1,
name='minor version',
encoder=ENC_INT_DEC,
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-1'),
# User agent
String('User-Agent:',
name='user_agent_field',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-3',
fuzzable=self.http_fuzz_protocol),
String('Fuzzer',
name='user-agent_name',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-2'),
# Token generated by framework to support following the session if necessary.
String('Fuzzer-Token:',
name='fuzzer_token',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-4',
fuzzable=self.http_fuzz_protocol),
String(str(self.gen_uuid),
name='fuzzer_token_type',
fuzzable=False), # do not fuzz token
Static('\r\n', name='EOL-3'),
# Accept
String('Accept:',
name='accept',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-5',
fuzzable=self.http_fuzz_protocol),
String('*/*',
name='accept_type_',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-4'),
# Cache-control no-cache by default
String('Cache-Control:',
name='cache-control',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-6',
fuzzable=self.http_fuzz_protocol),
String('no-cache',
name='cache_control_type',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-5'),
# Host, the target host
String('Host:',
name='host_name',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-7',
fuzzable=self.http_fuzz_protocol),
String(self.target_host,
name='target_host',
fuzzable=False), # do not fuzz target host address!
Static('\r\n', name='EOL-6'),
# Connection close, do not use keep-alive it results only one mutation, than the
# fuzzer will hang.
String('Connection:',
name='accept_encoding',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-8',
fuzzable=self.http_fuzz_protocol),
String('close',
name='accept_encoding_types',
fuzzable=False), # do not fuzz this field!
Static('\r\n', name='EOM-7'),
# Content-type from config.
String('Content-Type:',
name='Content-Type',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-9',
fuzzable=self.http_fuzz_protocol),
String(self.http_content_type,
name='content_type_',
fuzzable=self.http_fuzz_protocol),
Static('\r\n\r\n', name='EOM-8')
])
if self.http_post_put:
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Initiate template for HTTP POST ..."
)
http_template = Template(
name='HTTP_POST',
fields=[
# POST / HTTP/1.1
String('POST', name='method', fuzzable=False),
Delimiter(' ', name='delimiter-1', fuzzable=False),
String(self.http_path, name='path'),
Delimiter(' ',
name='delimiter-2',
fuzzable=self.http_fuzz_protocol),
String('HTTP',
name='protocol name',
fuzzable=self.http_fuzz_protocol),
Delimiter('/',
name='fws-1',
fuzzable=self.http_fuzz_protocol),
Dword(1,
name='major version',
encoder=ENC_INT_DEC,
fuzzable=self.http_fuzz_protocol),
Delimiter('.',
name='dot-1',
fuzzable=self.http_fuzz_protocol),
Dword(1,
name='minor version',
encoder=ENC_INT_DEC,
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-1'),
# User agent
String('User-Agent:',
name='user_agent_field',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-3',
fuzzable=self.http_fuzz_protocol),
String('Fuzzer',
name='user-agent_name',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-2'),
# Token generated by framework to support following the session if necessary.
String('Fuzzer-Token:',
name='fuzzer_token',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-4',
fuzzable=self.http_fuzz_protocol),
String(str(self.gen_uuid),
name='fuzzer_token_type',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-3'),
# Accept
String('Accept:',
name='accept',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-5',
fuzzable=self.http_fuzz_protocol),
String('*/*',
name='accept_type_',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-4'),
# Cache-control no-cache by default
String('Cache-Control:',
name='cache-control',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-6',
fuzzable=self.http_fuzz_protocol),
String('no-cache',
name='cache_control_type',
fuzzable=self.http_fuzz_protocol),
Static('\r\n', name='EOL-5'),
# Host, the target host
String('Host:',
name='host_name',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-7',
fuzzable=self.http_fuzz_protocol),
String(self.target_host,
name='target_host',
fuzzable=False), # do not fuzz target host address!
Static('\r\n', name='EOL-6'),
# Content length: obvious payload lenght.
String('Content-Length:',
name='content_length',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-9',
fuzzable=self.http_fuzz_protocol),
String(str(len(self.http_payload)),
name='content_length_len',
fuzzable=False),
Static('\r\n', name='EOM-8'),
# Connection close, do not use keep-alive it results only one mutation, than the
# fuzzer will hang.
String('Connection:',
name='accept_encoding',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-8',
fuzzable=self.http_fuzz_protocol),
String('close',
name='accept_encoding_types',
fuzzable=False), # do not fuzz this field!
Static('\r\n', name='EOM-7'),
# Content type
String('Content-Type:',
name='Content-Type',
fuzzable=self.http_fuzz_protocol),
Delimiter(' ',
name='delimiter-10',
fuzzable=self.http_fuzz_protocol),
String(self.http_content_type,
name='content_type_',
fuzzable=self.http_fuzz_protocol),
Static('\n\r\n', name='EOM-9'),
# Payload
String(self.http_payload, name='payload'),
Static('\r\n\r\n', name='EOM-10')
])
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Prepare HttpTarget ...")
target = HttpTarget(name='HttpTarget',
host=self.target_host,
port=self.target_port,
max_retries=10,
timeout=None)
target.set_expect_response('true')
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Prepare HttpController ...")
controller = HttpGetController('HttpGetController',
host=self.target_host,
port=self.target_port)
target.set_controller(controller)
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Defining GraphModel...")
model = GraphModel()
model.connect(http_template)
fuzzer = ServerFuzzer()
fuzzer.set_interface(WebInterface(port=26001))
fuzzer.set_model(model)
fuzzer.set_target(target)
fuzzer.set_delay_between_tests(1)
self.logger.info(f"[{time.strftime('%H:%M:%S')}] Start Fuzzer...")
self.logger.info(
f"[Further info are in the related Kitty log output!]")
fuzzer.start()
self.logger.info(f"[{time.strftime('%H:%M:%S')}] End Fuzzer Session")
fuzzer.stop()
class TestServerFuzzer(unittest.TestCase):
def setUp(self):
self.logger = get_test_logger()
self.logger.debug('TESTING METHOD: %s', self._testMethodName)
self.t_str = Template(name='simple_str_template', fields=[String(name='str1', value='kitty')])
self.t_int = Template(name='simple_int_template', fields=[UInt32(name='int1', value=0x1234)])
self.fuzzer = None
self.prepare()
def tearDown(self):
if self.fuzzer:
self.fuzzer.stop()
def prepare(self):
self.start_index = 10
self.end_index = 20
self.delay_duration = 0
self.fuzzer = ServerFuzzer(name="TestServerFuzzer", logger=self.logger)
self.interface = EmptyInterface()
self.fuzzer.set_interface(self.interface)
self.model = GraphModel()
self.model.connect(self.t_str)
self.fuzzer.set_model(self.model)
self.target = TargetMock({})
self.fuzzer.set_target(self.target)
self.fuzzer.set_range(self.start_index, self.end_index)
self.fuzzer.set_delay_between_tests(self.delay_duration)
def test_start_without_session(self):
self.fuzzer.set_model(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def test_start_without_target(self):
self.fuzzer.set_target(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def test_start_without_interface(self):
self.fuzzer.set_interface(None)
self.assertRaises(AssertionError, self.fuzzer.start)
self.fuzzer = None
def test_vanilla(self):
self.fuzzer.start()
info = self.fuzzer._get_session_info()
# reports = self.fuzzer._get_reports_manager()
# self.assertEqual(len(reports), 0)
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, self.end_index)
# self.assertEqual(info.original_start_index, 10)
self.assertEqual(info.start_index, self.start_index)
self.assertEqual(info.end_index, self.end_index)
mutations_tested = info.current_index - info.start_index
self.assertEqual(mutations_tested, self.end_index - self.start_index)
def test_start_index(self):
start_index = self.model.num_mutations() - 2
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.current_index, self.model.last_index())
self.assertEqual(info.end_index, self.model.last_index())
def test_end_index(self):
start_index = 0
end_index = 3
self.fuzzer.set_range(start_index, end_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, 3)
self.assertEqual(info.current_index, 3)
def test_full_range(self):
self.fuzzer.set_range()
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.start_index, 0)
self.assertEqual(info.end_index, self.model.last_index())
self.assertEqual(info.current_index, self.model.last_index())
def _MOVE_TO_TARGET_TESTS_test_send_failure(self):
config = {
'12': {
'send': ["raise exception"]
}
}
send_error_target = TargetMock(config)
self.fuzzer.set_target(send_error_target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer._get_reports_manager()
self.assertEqual(len(reports), 1)
self.assertTrue(12 in reports)
self.assertEqual(info.failure_count, 1)
def ___test_target_failed_is_true(self):
config = {
'12': {
'report': {
'failed': False
}
},
'13': {
'report': {
'failed': True
}
}
}
target = TargetMock(config)
self.fuzzer.set_target(target)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
reports = self.fuzzer._get_reports_manager()
self.assertEqual(len(reports), 1)
self.assertTrue(13 in reports)
self.assertEqual(info.failure_count, 1)
def test_set_range(self):
start_index = self.model.num_mutations() - 5
self.model.connect(self.t_str, self.t_int)
expected_end_index = self.model.last_index()
expected_num_mutations = expected_end_index - start_index
self.fuzzer.set_range(start_index)
self.fuzzer.start()
info = self.fuzzer._get_session_info()
self.assertEqual(info.failure_count, 0)
self.assertEqual(info.current_index, expected_end_index)
mutations_tested = info.current_index - info.start_index
self.assertEqual(mutations_tested, expected_num_mutations)
self.assertEqual(info.start_index, start_index)
self.assertEqual(info.end_index, expected_end_index)
def main(cls):
""" Main fuzzing routine.
:return:
"""
args = cls.parse_args()
conf = cls.parse_config()
logger = cls.logger(levels[args.log_level], "tPortmapd.fuzz",
"./session.log")
victim = args.target_addr
port = args.target_port
version = args.target_version
vmrun = conf.get("VMWARE", "vmrun")
vmx = conf.get("VMWARE", "vm_path")
snapshot_name = conf.get("VMWARE", "snapshot")
web_port = conf.getint("KITTY", "web_port")
to_log = "Started VxWorks {}.x fuzzing session\n".format(version)
to_log += "Target:\n\tip address: {}\n\tport: {}\n".format(
victim, port)
to_log += "VM: {}\nsnapshot: {}\n".format(vmx, snapshot_name)
logger.info(to_log)
# Define target
target = TcpTarget("tPortmapd",
logger=logger,
host=victim,
port=port,
timeout=2)
# Define the controller
controller = VmWareController(name="VMWare Controller",
logger=logger,
vmrun_path=vmrun,
vmx_path=vmx,
snap_name=snapshot_name,
target_addr=victim,
target_port=port)
target.set_controller(controller)
# Define the monitor
monitor = VxWorksProcessMonitor(name="VxWorks Process Monitor",
logger=logger,
target_addr=victim,
target_version=version)
target.add_monitor(monitor)
# Define the model
model = GraphModel()
model.connect(portmap_proc_null)
# Define the fuzzing session
fuzzer = ServerFuzzer(name="PortmapFuzzer", logger=logger)
fuzzer.set_interface(WebInterface(port=web_port))
fuzzer.set_model(model)
fuzzer.set_target(target)
fuzzer.set_delay_between_tests(0)
# Start!
try:
fuzzer.start()
except KeyboardInterrupt:
logger.info("Session interrupted by user...")
fuzzer.stop()
return 1
except Exception as exc:
logger.error(exc)
fuzzer.stop()
return -1
def run_dns(self):
"""
kitty low level field model
https://kitty.readthedocs.io/en/latest/kitty.model.low_level.field.html
"""
fields = []
counter = 0
dns_label_length = len(self.default_labels.split('.'))
dns_label_list = self.default_labels.split('.')
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Initiate template for DNS ...")
while counter < dns_label_length:
fields.append(
String(dns_label_list[counter],
name='sub_domain_' + str(counter),
max_size=10))
fields.append(Delimiter('.', name='delimiter_' + str(counter)))
counter += 1
fields.append(String(self.tld, name='tld', fuzzable=False))
dns_query = Template(name='DNS_QUERY', fields=fields)
"""
dns_query = Template(name='DNS_QUERY', fields=[
String('r', name='sub_domain', max_size=10),
Delimiter('.', name='space1"),
String('rf', name='sub_domain2', max_size=10),
Delimiter('.', name='space2"),
String(self.tld, name='tld', fuzzable=False),
])
"""
# define target, in this case this is SslTarget because of HTTPS
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Prepare DnsTarget ...")
target = DnsTarget(name='DnsTarget',
host=self.target_host,
port=self.target_port,
timeout=self.timeout)
target.set_expect_response('true')
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Prepare DnsController ...")
controller = DnsController('DnsController',
host=self.target_host,
port=self.target_port)
target.set_controller(controller)
# Define model
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Defining GraphModel...")
model = GraphModel()
model.connect(dns_query)
self.logger.info(
f"[{time.strftime('%H:%M:%S')}] Prepare Server Fuzzer ...")
fuzzer = ServerFuzzer()
fuzzer.set_interface(WebInterface(port=26001))
fuzzer.set_model(model)
fuzzer.set_target(target)
fuzzer.set_delay_between_tests(1)
self.logger.info(f"[{time.strftime('%H:%M:%S')}] Start Fuzzer...")
self.logger.info(
f"[Further info are in the related Kitty log output!]")
fuzzer.start()
self.logger.info(f"[{time.strftime('%H:%M:%S')}] End Fuzzer Session")
fuzzer.stop()
