def test_ns_mmq_2site_korzhnev_2005_15n_dq_data_complex128(self):
"""Test the matrix_exponential() function for higher dimensional data, and compare to matrix_exponential. This uses the data from systemtest Relax_disp.test_korzhnev_2005_15n_dq_data.
This test does the matrix exponential in complex128."""
fname = self.data + sep+ "test_korzhnev_2005_15n_dq_data"
M0, R20A, R20B, pA, dw, dwH, kex, inv_tcpmg, tcp, num_points, power, back_calc, pB, k_BA, k_AB = self.return_data_mmq_2site(fname)
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NS, NM, NO = num_points.shape
# Populate the m1 and m2 matrices (only once per function call for speed).
m1_mat = rmmq_2site_rankN(R20A=R20A, R20B=R20B, dw=dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
m2_mat = rmmq_2site_rankN(R20A=R20A, R20B=R20B, dw=-dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# The A+/- matrices.
A_pos_mat = matrix_exponential(m1_mat)
A_neg_mat = matrix_exponential(m2_mat)
# Loop over spins.
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Loop over offsets:
for oi in range(NO):
# Extract number of points.
num_points_i = num_points[si, mi, oi]
# Loop over the time points, back calculating the R2eff values.
for i in range(num_points_i):
# Test the two different methods.
# The A+/- matrices.
A_pos_i = A_pos_mat[si, mi, oi, i]
A_neg_i = A_neg_mat[si, mi, oi, i]
# The lower dimensional matrix exponential.
A_pos = np_matrix_exponential(m1_mat[si, mi, oi, i])
A_neg = np_matrix_exponential(m2_mat[si, mi, oi, i])
# Calculate differences
diff_A_pos_real = A_pos_i.real - A_pos.real
diff_A_pos_real_sum = sum(diff_A_pos_real)
diff_A_pos_imag = A_pos_i.imag - A_pos.imag
diff_A_pos_imag_sum = sum(diff_A_pos_imag)
diff_A_neg_real = A_neg_i.real - A_neg.real
diff_A_neg_real_sum = sum(diff_A_neg_real)
diff_A_neg_imag = A_neg_i.imag - A_neg.imag
diff_A_neg_imag_sum = sum(diff_A_neg_imag)
# Test that the sum difference is zero.
self.assertAlmostEqual(diff_A_pos_real_sum, 0.0)
self.assertAlmostEqual(diff_A_pos_imag_sum, 0.0)
self.assertAlmostEqual(diff_A_neg_real_sum, 0.0)
self.assertAlmostEqual(diff_A_neg_imag_sum, 0.0)
def test_ns_cpmg_2site_3d_hansen_cpmg_data(self):
"""Test the matrix_exponential() function for higher dimensional data, and compare to matrix_exponential. This uses the data from systemtest Relax_disp.test_hansen_cpmg_data_to_ns_cpmg_2site_3D."""
fname = self.data + sep + "test_hansen_cpmg_data_to_ns_cpmg_2site_3D"
r180x, M0, r10a, r10b, r20a, r20b, pA, dw, dw_orig, kex, inv_tcpmg, tcp, num_points, power, back_calc, pB, k_BA, k_AB = self.return_data_ns_cpmg_2site_3d(
fname)
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NE, NS, NM, NO, ND = back_calc.shape
# The matrix R that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat = rcpmg_3d_rankN(R1A=r10a,
R1B=r10b,
R2A=r20a,
R2B=r20b,
pA=pA,
pB=pB,
dw=dw,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
Rexpo_mat = matrix_exponential(R_mat)
# Loop over the spins
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Extract number of points.
num_points_si_mi = int(num_points[0, si, mi, 0])
# Loop over the time points, back calculating the R2eff values.
for di in range(num_points_si_mi):
# Test the two different methods.
R_mat_i = R_mat[0, si, mi, 0, di]
# The lower dimensional matrix exponential.
Rexpo = np_matrix_exponential(R_mat_i)
# The higher dimensional matrix exponential.
Rexpo_mat_i = Rexpo_mat[0, si, mi, 0, di]
diff = Rexpo - Rexpo_mat_i
diff_sum = sum(diff)
# Test that the sum difference is zero.
self.assertAlmostEqual(diff_sum, 0.0)
def test_ns_cpmg_2site_3d_hansen_cpmg_data(self):
"""Test the matrix_exponential() function for higher dimensional data, and compare to matrix_exponential. This uses the data from systemtest Relax_disp.test_hansen_cpmg_data_to_ns_cpmg_2site_3D."""
fname = self.data + sep+ "test_hansen_cpmg_data_to_ns_cpmg_2site_3D"
r180x, M0, r10a, r10b, r20a, r20b, pA, dw, dw_orig, kex, inv_tcpmg, tcp, num_points, power, back_calc, pB, k_BA, k_AB = self.return_data_ns_cpmg_2site_3d(fname)
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NE, NS, NM, NO, ND = back_calc.shape
# The matrix R that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat = rcpmg_3d_rankN(R1A=r10a, R1B=r10b, R2A=r20a, R2B=r20b, pA=pA, pB=pB, dw=dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
Rexpo_mat = matrix_exponential(R_mat)
# Loop over the spins
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Extract number of points.
num_points_si_mi = int(num_points[0, si, mi, 0])
# Loop over the time points, back calculating the R2eff values.
for di in range(num_points_si_mi):
# Test the two different methods.
R_mat_i = R_mat[0, si, mi, 0, di]
# The lower dimensional matrix exponential.
Rexpo = np_matrix_exponential(R_mat_i)
# The higher dimensional matrix exponential.
Rexpo_mat_i = Rexpo_mat[0, si, mi, 0, di]
diff = Rexpo - Rexpo_mat_i
diff_sum = sum(diff)
# Test that the sum difference is zero.
self.assertAlmostEqual(diff_sum, 0.0)
def r2eff_ns_mmq_2site_sq_dq_zq(M0=None,
F_vector=array([1, 0], float64),
R20A=None,
R20B=None,
pA=None,
dw=None,
dwH=None,
kex=None,
inv_tcpmg=None,
tcp=None,
back_calc=None,
num_points=None,
power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation for SQ, ZQ, and DQ data.
The notation used here comes from:
- Dmitry M. Korzhnev, Philipp Neudecker, Anthony Mittermaier, Vladislav Yu. Orekhov, and Lewis E. Kay (2005). Multiple-site exchange in proteins studied with a suite of six NMR relaxation dispersion experiments: An application to the folding of a Fyn SH3 domain mutant. J. Am. Chem. Soc., 127, 15602-15611. (doi: http://dx.doi.org/10.1021/ja054550e).
This function calculates and stores the R2eff values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float64, rank-1, 7D array
@keyword F_vector: The observable magnitisation vector. This defaults to [1, 0] for X observable magnitisation.
@type F_vector: numpy rank-1, 2D float64 array
@keyword R20A: The transverse, spin-spin relaxation rate for state A.
@type R20A: numpy float array of rank [NS][NM][NO][ND]
@keyword R20B: The transverse, spin-spin relaxation rate for state B.
@type R20B: numpy float array of rank [NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The combined chemical exchange difference between states A and B in rad/s. It should be set to dwH for 1H SQ data, dw for heteronuclear SQ data, dwH-dw for ZQ data, and dwH+dw for DQ data.
@type dw: numpy float array of rank [NS][NM][NO][ND]
@keyword dwH: Unused - this is simply to match the r2eff_ns_mmq_2site_mq() function arguments.
@type dwH: numpy float array of rank [NS][NM][NO][ND]
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NS][NM][NO][ND]
"""
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0[0] = pA
M0[1] = pB
# Extract shape of experiment.
NS, NM, NO = num_points.shape
# Populate the m1 and m2 matrices (only once per function call for speed).
m1_mat = rmmq_2site_rankN(R20A=R20A,
R20B=R20B,
dw=dw,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
m2_mat = rmmq_2site_rankN(R20A=R20A,
R20B=R20B,
dw=-dw,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
# The A+/- matrices.
A_pos_mat = matrix_exponential(m1_mat, dtype=complex128)
A_neg_mat = matrix_exponential(m2_mat, dtype=complex128)
# The evolution for one n.
evol_block_mat = einsum('...ij, ...jk', A_neg_mat, A_pos_mat)
evol_block_mat = einsum('...ij, ...jk', A_neg_mat, evol_block_mat)
evol_block_mat = einsum('...ij, ...jk', A_pos_mat, evol_block_mat)
# Loop over spins.
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Loop over offsets:
for oi in range(NO):
# Extract number of points.
num_points_i = num_points[si, mi, oi]
# Loop over the time points, back calculating the R2eff values.
for i in range(num_points_i):
# Extract data from array.
power_i = int(power[si, mi, oi, i])
evol_block_i = evol_block_mat[si, mi, oi, i]
# The full evolution.
evol = matrix_power(evol_block_i, power_i)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
Mx = dot(F_vector, dot(evol, M0))
Mx = Mx.real
if Mx <= 0.0 or isNaN(Mx):
back_calc[si, mi, oi, i] = 1e99
else:
back_calc[si, mi, oi,
i] = -inv_tcpmg[si, mi, oi, i] * log(Mx / pA)
def r2eff_ns_mmq_2site_mq(M0=None,
F_vector=array([1, 0], float64),
R20A=None,
R20B=None,
pA=None,
dw=None,
dwH=None,
kex=None,
inv_tcpmg=None,
tcp=None,
back_calc=None,
num_points=None,
power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation for MQ data.
The notation used here comes from:
- Dmitry M. Korzhnev, Philipp Neudecker, Anthony Mittermaier, Vladislav Yu. Orekhov, and Lewis E. Kay (2005). Multiple-site exchange in proteins studied with a suite of six NMR relaxation dispersion experiments: An application to the folding of a Fyn SH3 domain mutant. J. Am. Chem. Soc., 127, 15602-15611. (doi: http://dx.doi.org/10.1021/ja054550e).
and:
- Dmitry M. Korzhnev, Philipp Neudecker, Anthony Mittermaier, Vladislav Yu. Orekhov, and Lewis E. Kay (2005). Multiple-site exchange in proteins studied with a suite of six NMR relaxation dispersion experiments: An application to the folding of a Fyn SH3 domain mutant. J. Am. Chem. Soc., 127, 15602-15611. (doi: http://dx.doi.org/10.1021/ja054550e).
This function calculates and stores the R2eff values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float64, rank-1, 7D array
@keyword F_vector: The observable magnitisation vector. This defaults to [1, 0] for X observable magnitisation.
@type F_vector: numpy rank-1, 2D float64 array
@keyword R20A: The transverse, spin-spin relaxation rate for state A.
@type R20A: numpy float array of rank [NS][NM][NO][ND]
@keyword R20B: The transverse, spin-spin relaxation rate for state B.
@type R20B: numpy float array of rank [NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NS][NM][NO][ND]
@keyword dwH: The proton chemical exchange difference between states A and B in rad/s.
@type dwH: numpy float array of rank [NS][NM][NO][ND]
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NS][NM][NO][ND]
"""
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0[0] = pA
M0[1] = pB
# Extract shape of experiment.
NS, NM, NO = num_points.shape
# Populate the m1 and m2 matrices (only once per function call for speed).
# D+ matrix component.
m1_mat = rmmq_2site_rankN(R20A=R20A,
R20B=R20B,
dw=-dw - dwH,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
# Z- matrix component.
m2_mat = rmmq_2site_rankN(R20A=R20A,
R20B=R20B,
dw=dw - dwH,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
# The M1 and M2 matrices.
# Equivalent to D+.
M1_mat = matrix_exponential(m1_mat, dtype=complex128)
# Equivalent to Z-.
M2_mat = matrix_exponential(m2_mat, dtype=complex128)
# The complex conjugates M1* and M2*
# Equivalent to D+*.
M1_star_mat = conj(M1_mat)
# Equivalent to Z-*.
M2_star_mat = conj(M2_mat)
# Repetitive dot products (minimised for speed).
M1_M2_mat = einsum('...ij, ...jk', M1_mat, M2_mat)
M2_M1_mat = einsum('...ij, ...jk', M2_mat, M1_mat)
M1_M2_M2_M1_mat = einsum('...ij, ...jk', M1_M2_mat, M2_M1_mat)
M2_M1_M1_M2_mat = einsum('...ij, ...jk', M2_M1_mat, M1_M2_mat)
M1_M2_star_mat = einsum('...ij, ...jk', M1_star_mat, M2_star_mat)
M2_M1_star_mat = einsum('...ij, ...jk', M2_star_mat, M1_star_mat)
M1_M2_M2_M1_star_mat = einsum('...ij, ...jk', M1_M2_star_mat,
M2_M1_star_mat)
M2_M1_M1_M2_star_mat = einsum('...ij, ...jk', M2_M1_star_mat,
M1_M2_star_mat)
# Loop over spins.
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Loop over offsets:
for oi in range(NO):
num_points_i = num_points[si, mi, oi]
# Loop over the time points, back calculating the R2eff values.
for i in range(num_points_i):
# Extract data from array.
power_i = int(power[si, mi, oi, i])
M1_M2_i = M1_M2_mat[si, mi, oi, i]
M1_M2_star_i = M1_M2_star_mat[si, mi, oi, i]
M2_M1_i = M2_M1_mat[si, mi, oi, i]
M2_M1_star_i = M2_M1_star_mat[si, mi, oi, i]
M1_M2_M2_M1_i = M1_M2_M2_M1_mat[si, mi, oi, i]
M2_M1_M1_M2_star_i = M2_M1_M1_M2_star_mat[si, mi, oi, i]
M2_M1_M1_M2_i = M2_M1_M1_M2_mat[si, mi, oi, i]
M1_M2_M2_M1_star_i = M1_M2_M2_M1_star_mat[si, mi, oi, i]
# Special case of 1 CPMG block - the power is zero.
if power_i == 1:
# M1.M2.
A = M1_M2_i
# M1*.M2*.
B = M1_M2_star_i
# M2.M1.
C = M2_M1_i
# M2*.M1*.
D = M2_M1_star_i
# Matrices for even number of CPMG blocks.
elif power_i % 2 == 0:
# The power factor (only calculate once).
fact = int(floor(power_i / 2))
# (M1.M2.M2.M1)^(n/2).
A = matrix_power(M1_M2_M2_M1_i, fact)
# (M2*.M1*.M1*.M2*)^(n/2).
B = matrix_power(M2_M1_M1_M2_star_i, fact)
# (M2.M1.M1.M2)^(n/2).
C = matrix_power(M2_M1_M1_M2_i, fact)
# (M1*.M2*.M2*.M1*)^(n/2).
D = matrix_power(M1_M2_M2_M1_star_i, fact)
# Matrices for odd number of CPMG blocks.
else:
# The power factor (only calculate once).
fact = int(floor((power_i - 1) / 2))
# (M1.M2.M2.M1)^((n-1)/2).M1.M2.
A = matrix_power(M1_M2_M2_M1_i, fact)
A = dot(A, M1_M2_i)
# (M1*.M2*.M2*.M1*)^((n-1)/2).M1*.M2*.
B = matrix_power(M1_M2_M2_M1_star_i, fact)
B = dot(B, M1_M2_star_i)
# (M2.M1.M1.M2)^((n-1)/2).M2.M1.
C = matrix_power(M2_M1_M1_M2_i, fact)
C = dot(C, M2_M1_i)
# (M2*.M1*.M1*.M2*)^((n-1)/2).M2*.M1*.
D = matrix_power(M2_M1_M1_M2_star_i, fact)
D = dot(D, M2_M1_star_i)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
A_B = dot(A, B)
C_D = dot(C, D)
Mx = dot(dot(F_vector, (A_B + C_D)), M0)
Mx = Mx.real / 2.0
if Mx <= 0.0 or isNaN(Mx):
back_calc[si, mi, oi, i] = 1e99
else:
back_calc[si, mi, oi,
i] = -inv_tcpmg[si, mi, oi, i] * log(Mx / pA)
def ns_r1rho_2site(M0=None, M0_T=None, r1rho_prime=None, omega=None, offset=None, r1=0.0, pA=None, dw=None, kex=None, spin_lock_fields=None, relax_time=None, inv_relax_time=None, back_calc=None):
"""The 2-site numerical solution to the Bloch-McConnell equation for R1rho data.
This function calculates and stores the R1rho values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float array of rank [NE][NS][NM][NO][ND][6][1]
@keyword M0_T: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations, where the outer two axis has been swapped for efficient dot operations.
@type M0_T: numpy float array of rank [NE][NS][NM][NO][ND][1][6]
@keyword r1rho_prime: The R1rho_prime parameter value (R1rho with no exchange).
@type r1rho_prime: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword omega: The chemical shift for the spin in rad/s.
@type omega: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword offset: The spin-lock offsets for the data.
@type offset: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword r1: The R1 relaxation rate.
@type r1: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword spin_lock_fields: The R1rho spin-lock field strengths (in rad.s^-1).
@type spin_lock_fields: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword relax_time: The total relaxation time period for each spin-lock field strength (in seconds).
@type relax_time: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword inv_relax_time: The inverse of the relaxation time period for each spin-lock field strength (in inverse seconds). This is used for faster calculations.
@type inv_relax_time: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NE][NS][NM][NO][ND]
"""
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# The matrix that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat = rr1rho_3d_2site_rankN(R1=r1, r1rho_prime=r1rho_prime, dw=dw, omega=omega, offset=offset, w1=spin_lock_fields, k_AB=k_AB, k_BA=k_BA, relax_time=relax_time)
# This matrix is a propagator that will evolve the magnetization with the matrix R.
Rexpo_mat = matrix_exponential(R_mat)
# Magnetization evolution.
Rexpo_M0_mat = einsum('...ij, ...jk', Rexpo_mat, M0)
# Magnetization evolution, which include all dimensions.
MA_mat = einsum('...ij, ...jk', M0_T, Rexpo_M0_mat)[:, :, :, :, :, 0, 0]
# Insert safe checks.
if min(MA_mat) < 0.0:
mask_min_MA_mat = masked_less(MA_mat, 0.0)
# Fill with high values.
MA_mat[mask_min_MA_mat.mask] = 1e100
# Do back calculation.
back_calc[:] = -inv_relax_time * log(MA_mat)
# Catch errors, taking a sum over array is the fastest way to check for
# +/- inf (infinity) and nan (not a number).
if not isfinite(sum(back_calc)):
# Replaces nan, inf, etc. with fill value.
fix_invalid(back_calc, copy=False, fill_value=1e100)
def r2eff_ns_cpmg_2site_star(M0=None, r20a=None, r20b=None, pA=None, dw=None, dw_orig=None, kex=None, inv_tcpmg=None, tcp=None, back_calc=None, num_points=None, power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation using complex conjugate matrices.
This function calculates and stores the R2eff values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float64, rank-1, 2D array
@keyword r20a: The R2 value for state A in the absence of exchange.
@type r20a: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword r20b: The R2 value for state B in the absence of exchange.
@type r20b: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword dw_orig: The chemical exchange difference between states A and B in ppm. This is only for faster checking of zero value, which result in no exchange.
@type dw_orig: numpy float array of rank-1
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NE][NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NE][NS][NM][NO][ND]
"""
# Flag to tell if values should be replaced if math function is violated.
t_dw_zero = False
# Catch parameter values that will result in no exchange, returning flat R2eff = R20 lines (when kex = 0.0, k_AB = 0.0).
if pA == 1.0 or kex == 0.0:
back_calc[:] = r20a
return
# Test if dw is zero. Create a mask for the affected spins to replace these with R20 at the end of the calculationWait for replacement, since this is spin specific.
if min(fabs(dw_orig)) == 0.0:
t_dw_zero = True
mask_dw_zero = masked_where(dw == 0.0, dw)
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0[0] = pA
M0[1] = pB
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NE, NS, NM, NO, ND = back_calc.shape
# The matrix R that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat, cR2_mat, Rr_mat, Rex_mat, RCS_mat = rcpmg_star_rankN(R2A=r20a, R2B=r20b, dw=dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# The the essential evolution matrix.
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
eR_mat = matrix_exponential(R_mat)
ecR2_mat = matrix_exponential(cR2_mat)
# Preform the matrix.
# This is the propagator for an element of [delay tcp; 180 deg pulse; 2 times delay tcp; 180 deg pulse; delay tau], i.e. for 2 times tau-180-tau.
prop_2_mat = evolution_matrix_mat = einsum('...ij, ...jk', eR_mat, ecR2_mat)
prop_2_mat = evolution_matrix_mat = einsum('...ij, ...jk', prop_2_mat, eR_mat)
# Loop over the spins
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Extract the values from the higher dimensional arrays.
num_points_si_mi = int(num_points[0, si, mi, 0])
# Loop over the time points, back calculating the R2eff values.
for di in range(num_points_si_mi):
# Extract the values from the higher dimensional arrays.
power_si_mi_di = int(power[0, si, mi, 0, di])
# This is the propagator for an element of [delay tcp; 180 deg pulse; 2 times delay tcp; 180 deg pulse; delay tau], i.e. for 2 times tau-180-tau.
prop_2_i = prop_2_mat[0, si, mi, 0, di]
# Now create the total propagator that will evolve the magnetization under the CPMG train, i.e. it applies the above tau-180-tau-tau-180-tau so many times as required for the CPMG frequency under consideration.
prop_total = matrix_power(prop_2_i, power_si_mi_di)
# Now we apply the above propagator to the initial magnetization vector - resulting in the magnetization that remains after the full CPMG pulse train. It is called M of t (t is the time after the CPMG train).
Moft = dot(prop_total, M0)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
Mx = Moft[0].real / M0[0]
if Mx <= 0.0 or isNaN(Mx):
back_calc[0, si, mi, 0, di] = 1e99
else:
back_calc[0, si, mi, 0, di]= -inv_tcpmg[0, si, mi, 0, di] * log(Mx)
# Replace data in array.
# If dw is zero.
if t_dw_zero:
back_calc[mask_dw_zero.mask] = r20a[mask_dw_zero.mask]
# Catch errors, taking a sum over array is the fastest way to check for
# +/- inf (infinity) and nan (not a number).
if not isfinite(sum(back_calc)):
# Replaces nan, inf, etc. with fill value.
fix_invalid(back_calc, copy=False, fill_value=1e100)
def ns_r1rho_3site(M0=None, M0_T=None, r1rho_prime=None, omega=None, offset=None, r1=0.0, pA=None, pB=None, dw_AB=None, dw_BC=None, kex_AB=None, kex_BC=None, kex_AC=None, spin_lock_fields=None, relax_time=None, inv_relax_time=None, back_calc=None, num_points=None):
"""The 3-site numerical solution to the Bloch-McConnell equation for R1rho data.
This function calculates and stores the R1rho values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float array of rank [NE][NS][NM][NO][ND][9][1]
@keyword M0_T: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations, where the outer two axis has been swapped for efficient dot operations.
@keyword r1rho_prime: The R1rho_prime parameter value (R1rho with no exchange).
@type r1rho_prime: numpy float array of rank [NE][NS][NM][NO][ND][1][9]
@keyword omega: The chemical shift for the spin in rad/s.
@type omega: numpy float array of rank [NS][NM][NO][ND]
@keyword offset: The spin-lock offsets for the data.
@type offset: numpy float array of rank [NS][NM][NO][ND]
@keyword r1: The R1 relaxation rate.
@type r1: numpy float array of rank [NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword pB: The population of state B.
@type pB: float
@keyword dw_AB: The chemical exchange difference between states A and B in rad/s.
@type dw_AB: numpy float array of rank [NS][NM][NO][ND]
@keyword dw_BC: The chemical exchange difference between states B and C in rad/s.
@type dw_BC: numpy float array of rank [NS][NM][NO][ND]
@keyword kex_AB: The exchange rate between sites A and B for 3-site exchange with kex_AB = k_AB + k_BA (rad.s^-1)
@type kex_AB: float
@keyword kex_BC: The exchange rate between sites A and C for 3-site exchange with kex_AC = k_AC + k_CA (rad.s^-1)
@type kex_BC: float
@keyword kex_AC: The exchange rate between sites B and C for 3-site exchange with kex_BC = k_BC + k_CB (rad.s^-1)
@type kex_AC: float
@keyword spin_lock_fields: The R1rho spin-lock field strengths (in rad.s^-1).
@type spin_lock_fields: numpy float array of rank [NS][NM][NO][ND]
@keyword relax_time: The total relaxation time period for each spin-lock field strength (in seconds).
@type relax_time: numpy float array of rank [NS][NM][NO][ND]
@keyword inv_relax_time: The inverse of the relaxation time period for each spin-lock field strength (in inverse seconds). This is used for faster calculations.
@type inv_relax_time: numpy float array of rank [NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NS][NM][NO]
"""
# Once off parameter conversions.
dw_AC = dw_AB + dw_BC
pC = 1.0 - pA - pB
pA_pB = pA + pB
pA_pC = pA + pC
pB_pC = pB + pC
k_BA = pA * kex_AB / pA_pB
k_AB = pB * kex_AB / pA_pB
k_CB = pB * kex_BC / pB_pC
k_BC = pC * kex_BC / pB_pC
k_CA = pA * kex_AC / pA_pC
k_AC = pC * kex_AC / pA_pC
# Extract shape of experiment.
NE, NS, NM, NO = num_points.shape
# The matrix that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat = rr1rho_3d_3site_rankN(R1=r1, r1rho_prime=r1rho_prime, omega=omega, offset=offset, dw_AB=dw_AB, dw_AC=dw_AC, w1=spin_lock_fields, k_AB=k_AB, k_BA=k_BA, k_BC=k_BC, k_CB=k_CB, k_AC=k_AC, k_CA=k_CA, relax_time=relax_time)
# This matrix is a propagator that will evolve the magnetization with the matrix R.
Rexpo_mat = matrix_exponential(R_mat)
# Magnetization evolution.
Rexpo_M0_mat = einsum('...ij, ...jk', Rexpo_mat, M0)
# Magnetization evolution, which include all dimensions.
MA_mat = einsum('...ij, ...jk', M0_T, Rexpo_M0_mat)[:, :, :, :, :, 0, 0]
# Insert safe checks.
if min(MA_mat) < 0.0:
mask_min_MA_mat = masked_less(MA_mat, 0.0)
# Fill with high values.
MA_mat[mask_min_MA_mat.mask] = 1e100
# Do back calculation.
back_calc[:] = -inv_relax_time * log(MA_mat)
# Catch errors, taking a sum over array is the fastest way to check for
# +/- inf (infinity) and nan (not a number).
if not isfinite(sum(back_calc)):
# Replaces nan, inf, etc. with fill value.
fix_invalid(back_calc, copy=False, fill_value=1e100)
def r2eff_ns_mmq_2site_sq_dq_zq(M0=None, F_vector=array([1, 0], float64), R20A=None, R20B=None, pA=None, dw=None, dwH=None, kex=None, inv_tcpmg=None, tcp=None, back_calc=None, num_points=None, power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation for SQ, ZQ, and DQ data.
The notation used here comes from:
- Dmitry M. Korzhnev, Philipp Neudecker, Anthony Mittermaier, Vladislav Yu. Orekhov, and Lewis E. Kay (2005). Multiple-site exchange in proteins studied with a suite of six NMR relaxation dispersion experiments: An application to the folding of a Fyn SH3 domain mutant. J. Am. Chem. Soc., 127, 15602-15611. (doi: http://dx.doi.org/10.1021/ja054550e).
This function calculates and stores the R2eff values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float64, rank-1, 7D array
@keyword F_vector: The observable magnitisation vector. This defaults to [1, 0] for X observable magnitisation.
@type F_vector: numpy rank-1, 2D float64 array
@keyword R20A: The transverse, spin-spin relaxation rate for state A.
@type R20A: numpy float array of rank [NS][NM][NO][ND]
@keyword R20B: The transverse, spin-spin relaxation rate for state B.
@type R20B: numpy float array of rank [NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The combined chemical exchange difference between states A and B in rad/s. It should be set to dwH for 1H SQ data, dw for heteronuclear SQ data, dwH-dw for ZQ data, and dwH+dw for DQ data.
@type dw: numpy float array of rank [NS][NM][NO][ND]
@keyword dwH: Unused - this is simply to match the r2eff_ns_mmq_2site_mq() function arguments.
@type dwH: numpy float array of rank [NS][NM][NO][ND]
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NS][NM][NO][ND]
"""
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0[0] = pA
M0[1] = pB
# Extract shape of experiment.
NS, NM, NO = num_points.shape
# Populate the m1 and m2 matrices (only once per function call for speed).
m1_mat = rmmq_2site_rankN(R20A=R20A, R20B=R20B, dw=dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
m2_mat = rmmq_2site_rankN(R20A=R20A, R20B=R20B, dw=-dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# The A+/- matrices.
A_pos_mat = matrix_exponential(m1_mat, dtype=complex128)
A_neg_mat = matrix_exponential(m2_mat, dtype=complex128)
# The evolution for one n.
evol_block_mat = einsum('...ij, ...jk', A_neg_mat, A_pos_mat)
evol_block_mat = einsum('...ij, ...jk', A_neg_mat, evol_block_mat)
evol_block_mat = einsum('...ij, ...jk', A_pos_mat, evol_block_mat)
# Loop over spins.
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Loop over offsets:
for oi in range(NO):
# Extract number of points.
num_points_i = num_points[si, mi, oi]
# Loop over the time points, back calculating the R2eff values.
for i in range(num_points_i):
# Extract data from array.
power_i = int(power[si, mi, oi, i])
evol_block_i = evol_block_mat[si, mi, oi, i]
# The full evolution.
evol = matrix_power(evol_block_i, power_i)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
Mx = dot(F_vector, dot(evol, M0))
Mx = Mx.real
if Mx <= 0.0 or isNaN(Mx):
back_calc[si, mi, oi, i] = 1e99
else:
back_calc[si, mi, oi, i] = -inv_tcpmg[si, mi, oi, i] * log(Mx / pA)
def r2eff_ns_mmq_2site_mq(M0=None, F_vector=array([1, 0], float64), R20A=None, R20B=None, pA=None, dw=None, dwH=None, kex=None, inv_tcpmg=None, tcp=None, back_calc=None, num_points=None, power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation for MQ data.
The notation used here comes from:
- Dmitry M. Korzhnev, Philipp Neudecker, Anthony Mittermaier, Vladislav Yu. Orekhov, and Lewis E. Kay (2005). Multiple-site exchange in proteins studied with a suite of six NMR relaxation dispersion experiments: An application to the folding of a Fyn SH3 domain mutant. J. Am. Chem. Soc., 127, 15602-15611. (doi: http://dx.doi.org/10.1021/ja054550e).
and:
- Dmitry M. Korzhnev, Philipp Neudecker, Anthony Mittermaier, Vladislav Yu. Orekhov, and Lewis E. Kay (2005). Multiple-site exchange in proteins studied with a suite of six NMR relaxation dispersion experiments: An application to the folding of a Fyn SH3 domain mutant. J. Am. Chem. Soc., 127, 15602-15611. (doi: http://dx.doi.org/10.1021/ja054550e).
This function calculates and stores the R2eff values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float64, rank-1, 7D array
@keyword F_vector: The observable magnitisation vector. This defaults to [1, 0] for X observable magnitisation.
@type F_vector: numpy rank-1, 2D float64 array
@keyword R20A: The transverse, spin-spin relaxation rate for state A.
@type R20A: numpy float array of rank [NS][NM][NO][ND]
@keyword R20B: The transverse, spin-spin relaxation rate for state B.
@type R20B: numpy float array of rank [NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NS][NM][NO][ND]
@keyword dwH: The proton chemical exchange difference between states A and B in rad/s.
@type dwH: numpy float array of rank [NS][NM][NO][ND]
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NS][NM][NO][ND]
"""
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0[0] = pA
M0[1] = pB
# Extract shape of experiment.
NS, NM, NO = num_points.shape
# Populate the m1 and m2 matrices (only once per function call for speed).
# D+ matrix component.
m1_mat = rmmq_2site_rankN(R20A=R20A, R20B=R20B, dw=-dw - dwH, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# Z- matrix component.
m2_mat = rmmq_2site_rankN(R20A=R20A, R20B=R20B, dw=dw - dwH, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# The M1 and M2 matrices.
# Equivalent to D+.
M1_mat = matrix_exponential(m1_mat, dtype=complex128)
# Equivalent to Z-.
M2_mat = matrix_exponential(m2_mat, dtype=complex128)
# The complex conjugates M1* and M2*
# Equivalent to D+*.
M1_star_mat = conj(M1_mat)
# Equivalent to Z-*.
M2_star_mat = conj(M2_mat)
# Repetitive dot products (minimised for speed).
M1_M2_mat = einsum('...ij, ...jk', M1_mat, M2_mat)
M2_M1_mat = einsum('...ij, ...jk', M2_mat, M1_mat)
M1_M2_M2_M1_mat = einsum('...ij, ...jk', M1_M2_mat, M2_M1_mat)
M2_M1_M1_M2_mat = einsum('...ij, ...jk', M2_M1_mat, M1_M2_mat)
M1_M2_star_mat = einsum('...ij, ...jk', M1_star_mat, M2_star_mat)
M2_M1_star_mat = einsum('...ij, ...jk', M2_star_mat, M1_star_mat)
M1_M2_M2_M1_star_mat = einsum('...ij, ...jk', M1_M2_star_mat, M2_M1_star_mat)
M2_M1_M1_M2_star_mat = einsum('...ij, ...jk', M2_M1_star_mat, M1_M2_star_mat)
# Loop over spins.
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Loop over offsets:
for oi in range(NO):
num_points_i = num_points[si, mi, oi]
# Loop over the time points, back calculating the R2eff values.
for i in range(num_points_i):
# Extract data from array.
power_i = int(power[si, mi, oi, i])
M1_M2_i = M1_M2_mat[si, mi, oi, i]
M1_M2_star_i = M1_M2_star_mat[si, mi, oi, i]
M2_M1_i = M2_M1_mat[si, mi, oi, i]
M2_M1_star_i = M2_M1_star_mat[si, mi, oi, i]
M1_M2_M2_M1_i = M1_M2_M2_M1_mat[si, mi, oi, i]
M2_M1_M1_M2_star_i = M2_M1_M1_M2_star_mat[si, mi, oi, i]
M2_M1_M1_M2_i = M2_M1_M1_M2_mat[si, mi, oi, i]
M1_M2_M2_M1_star_i = M1_M2_M2_M1_star_mat[si, mi, oi, i]
# Special case of 1 CPMG block - the power is zero.
if power_i == 1:
# M1.M2.
A = M1_M2_i
# M1*.M2*.
B = M1_M2_star_i
# M2.M1.
C = M2_M1_i
# M2*.M1*.
D = M2_M1_star_i
# Matrices for even number of CPMG blocks.
elif power_i % 2 == 0:
# The power factor (only calculate once).
fact = int(floor(power_i / 2))
# (M1.M2.M2.M1)^(n/2).
A = matrix_power(M1_M2_M2_M1_i, fact)
# (M2*.M1*.M1*.M2*)^(n/2).
B = matrix_power(M2_M1_M1_M2_star_i, fact)
# (M2.M1.M1.M2)^(n/2).
C = matrix_power(M2_M1_M1_M2_i, fact)
# (M1*.M2*.M2*.M1*)^(n/2).
D = matrix_power(M1_M2_M2_M1_star_i, fact)
# Matrices for odd number of CPMG blocks.
else:
# The power factor (only calculate once).
fact = int(floor((power_i - 1) / 2))
# (M1.M2.M2.M1)^((n-1)/2).M1.M2.
A = matrix_power(M1_M2_M2_M1_i, fact)
A = dot(A, M1_M2_i)
# (M1*.M2*.M2*.M1*)^((n-1)/2).M1*.M2*.
B = matrix_power(M1_M2_M2_M1_star_i, fact)
B = dot(B, M1_M2_star_i)
# (M2.M1.M1.M2)^((n-1)/2).M2.M1.
C = matrix_power(M2_M1_M1_M2_i, fact)
C = dot(C, M2_M1_i)
# (M2*.M1*.M1*.M2*)^((n-1)/2).M2*.M1*.
D = matrix_power(M2_M1_M1_M2_star_i, fact)
D = dot(D, M2_M1_star_i)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
A_B = dot(A, B)
C_D = dot(C, D)
Mx = dot(dot(F_vector, (A_B + C_D)), M0)
Mx = Mx.real / 2.0
if Mx <= 0.0 or isNaN(Mx):
back_calc[si, mi, oi, i] = 1e99
else:
back_calc[si, mi, oi, i]= -inv_tcpmg[si, mi, oi, i] * log(Mx / pA)
def r2eff_ns_cpmg_2site_3D(r180x=None, M0=None, M0_T=None, r10a=0.0, r10b=0.0, r20a=None, r20b=None, pA=None, dw=None, dw_orig=None, kex=None, inv_tcpmg=None, tcp=None, back_calc=None, num_points=None, power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation.
This function calculates and stores the R2eff values.
@keyword r180x: The X-axis pi-pulse propagator.
@type r180x: numpy float64, rank-2, 7D array
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float array of rank [NE][NS][NM][NO][ND][7][1]
@keyword M0_T: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations, where the outer two axis has been swapped for efficient dot operations.
@type M0_T: numpy float array of rank [NE][NS][NM][NO][ND][1][7]
@keyword r10a: The R1 value for state A.
@type r10a: float
@keyword r10b: The R1 value for state B.
@type r10b: float
@keyword r20a: The R2 value for state A in the absence of exchange.
@type r20a: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword r20b: The R2 value for state B in the absence of exchange.
@type r20b: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword dw_orig: The chemical exchange difference between states A and B in ppm. This is only for faster checking of zero value, which result in no exchange.
@type dw_orig: numpy float array of rank-1
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NE][NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NE][NS][NM][NO][ND]
"""
# Flag to tell if values should be replaced if math function is violated.
t_dw_zero = False
# Catch parameter values that will result in no exchange, returning flat R2eff = R20 lines (when kex = 0.0, k_AB = 0.0).
if pA == 1.0 or kex == 0.0:
back_calc[:] = r20a
return
# Test if dw is zero. Create a mask for the affected spins to replace these with R20 at the end of the calculationWait for replacement, since this is spin specific.
if min(fabs(dw_orig)) == 0.0:
t_dw_zero = True
mask_dw_zero = masked_where(dw == 0.0, dw)
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0_T[:, :, :, :, :, 0, 1] = pA
M0_T[:, :, :, :, :, 0, 4] = pB
M0[:, :, :, :, :, 1, 0] = pA
M0[:, :, :, :, :, 4, 0] = pB
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NE, NS, NM, NO, ND = back_calc.shape
# The matrix R that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat = rcpmg_3d_rankN(R1A=r10a, R1B=r10b, R2A=r20a, R2B=r20b, pA=pA, pB=pB, dw=dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
Rexpo_mat = matrix_exponential(R_mat)
# The the essential evolution matrix.
# This is a dot product of the outer [7][7] matrix of the Rexpo_mat and r180x matrixes, which
# have the shape [NE][NS][NM][NO][ND][7][7] and [7][7].
# This can be achieved by using numpy einsum, and where ellipsis notation will use the last axis.
evolution_matrix_mat = einsum('...ij,...jk', Rexpo_mat, r180x)
evolution_matrix_mat = einsum('...ij,...jk', evolution_matrix_mat, Rexpo_mat)
evolution_matrix_mat = einsum('...ij,...jk', evolution_matrix_mat, evolution_matrix_mat)
# Roll axis around.
evolution_matrix_T_mat = rollaxis(evolution_matrix_mat, 6, 5)
# Preform the initial magnetisation.
evolution_matrix_T_M0_mat = einsum('...ij,...jk', M0_T, evolution_matrix_T_mat)
# Loop over the spins
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Extract number of points.
num_points_si_mi = int(num_points[0, si, mi, 0])
# Loop over the time points, back calculating the R2eff values.
for di in range(num_points_si_mi):
# Extract the values from the higher dimensional arrays.
inv_tcpmg_si_mi_di = inv_tcpmg[0, si, mi, 0, di]
power_si_mi_di = int(power[0, si, mi, 0, di])
r20a_si_mi_di = r20a[0, si, mi, 0, di]
# Initial magnetisation.
Mint_T_i = evolution_matrix_T_M0_mat[0, si, mi, 0, di]
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
evolution_matrix_T_i = evolution_matrix_T_mat[0, si, mi, 0, di]
# Get which power to raise the matrix to.
l = int(power_si_mi_di-1)
# Raise the square evolution matrix to the power l.
evolution_matrix_T_power_i = matrix_power(evolution_matrix_T_i, l)
# Evolve the magnetisation.
Mint_T_i = dot(Mint_T_i, evolution_matrix_T_power_i)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
Mx = Mint_T_i[0][1] / pA
if Mx <= 0.0 or isNaN(Mx):
back_calc[0, si, mi, 0, di] = r20a_si_mi_di
else:
back_calc[0, si, mi, 0, di] = - inv_tcpmg_si_mi_di * log(Mx)
# Replace data in array.
# If dw is zero.
if t_dw_zero:
back_calc[mask_dw_zero.mask] = r20a[mask_dw_zero.mask]
# Catch errors, taking a sum over array is the fastest way to check for
# +/- inf (infinity) and nan (not a number).
if not isfinite(sum(back_calc)):
# Replaces nan, inf, etc. with fill value.
fix_invalid(back_calc, copy=False, fill_value=1e100)
def test_ns_mmq_2site_korzhnev_2005_15n_dq_data_complex128(self):
"""Test the matrix_exponential() function for higher dimensional data, and compare to matrix_exponential. This uses the data from systemtest Relax_disp.test_korzhnev_2005_15n_dq_data.
This test does the matrix exponential in complex128."""
fname = self.data + sep + "test_korzhnev_2005_15n_dq_data"
M0, R20A, R20B, pA, dw, dwH, kex, inv_tcpmg, tcp, num_points, power, back_calc, pB, k_BA, k_AB = self.return_data_mmq_2site(
fname)
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NS, NM, NO = num_points.shape
# Populate the m1 and m2 matrices (only once per function call for speed).
m1_mat = rmmq_2site_rankN(R20A=R20A,
R20B=R20B,
dw=dw,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
m2_mat = rmmq_2site_rankN(R20A=R20A,
R20B=R20B,
dw=-dw,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
# The A+/- matrices.
A_pos_mat = matrix_exponential(m1_mat)
A_neg_mat = matrix_exponential(m2_mat)
# Loop over spins.
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Loop over offsets:
for oi in range(NO):
# Extract number of points.
num_points_i = num_points[si, mi, oi]
# Loop over the time points, back calculating the R2eff values.
for i in range(num_points_i):
# Test the two different methods.
# The A+/- matrices.
A_pos_i = A_pos_mat[si, mi, oi, i]
A_neg_i = A_neg_mat[si, mi, oi, i]
# The lower dimensional matrix exponential.
A_pos = np_matrix_exponential(m1_mat[si, mi, oi, i])
A_neg = np_matrix_exponential(m2_mat[si, mi, oi, i])
# Calculate differences
diff_A_pos_real = A_pos_i.real - A_pos.real
diff_A_pos_real_sum = sum(diff_A_pos_real)
diff_A_pos_imag = A_pos_i.imag - A_pos.imag
diff_A_pos_imag_sum = sum(diff_A_pos_imag)
diff_A_neg_real = A_neg_i.real - A_neg.real
diff_A_neg_real_sum = sum(diff_A_neg_real)
diff_A_neg_imag = A_neg_i.imag - A_neg.imag
diff_A_neg_imag_sum = sum(diff_A_neg_imag)
# Test that the sum difference is zero.
self.assertAlmostEqual(diff_A_pos_real_sum, 0.0)
self.assertAlmostEqual(diff_A_pos_imag_sum, 0.0)
self.assertAlmostEqual(diff_A_neg_real_sum, 0.0)
self.assertAlmostEqual(diff_A_neg_imag_sum, 0.0)
def r2eff_ns_cpmg_2site_3D(r180x=None,
M0=None,
M0_T=None,
r10a=0.0,
r10b=0.0,
r20a=None,
r20b=None,
pA=None,
dw=None,
dw_orig=None,
kex=None,
inv_tcpmg=None,
tcp=None,
back_calc=None,
num_points=None,
power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation.
This function calculates and stores the R2eff values.
@keyword r180x: The X-axis pi-pulse propagator.
@type r180x: numpy float64, rank-2, 7D array
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float array of rank [NE][NS][NM][NO][ND][7][1]
@keyword M0_T: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations, where the outer two axis has been swapped for efficient dot operations.
@type M0_T: numpy float array of rank [NE][NS][NM][NO][ND][1][7]
@keyword r10a: The R1 value for state A.
@type r10a: float
@keyword r10b: The R1 value for state B.
@type r10b: float
@keyword r20a: The R2 value for state A in the absence of exchange.
@type r20a: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword r20b: The R2 value for state B in the absence of exchange.
@type r20b: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword dw_orig: The chemical exchange difference between states A and B in ppm. This is only for faster checking of zero value, which result in no exchange.
@type dw_orig: numpy float array of rank-1
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NE][NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NE][NS][NM][NO][ND]
"""
# Flag to tell if values should be replaced if math function is violated.
t_dw_zero = False
# Catch parameter values that will result in no exchange, returning flat R2eff = R20 lines (when kex = 0.0, k_AB = 0.0).
if pA == 1.0 or kex == 0.0:
back_calc[:] = r20a
return
# Test if dw is zero. Create a mask for the affected spins to replace these with R20 at the end of the calculationWait for replacement, since this is spin specific.
if min(fabs(dw_orig)) == 0.0:
t_dw_zero = True
mask_dw_zero = masked_where(dw == 0.0, dw)
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0_T[:, :, :, :, :, 0, 1] = pA
M0_T[:, :, :, :, :, 0, 4] = pB
M0[:, :, :, :, :, 1, 0] = pA
M0[:, :, :, :, :, 4, 0] = pB
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NE, NS, NM, NO, ND = back_calc.shape
# The matrix R that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat = rcpmg_3d_rankN(R1A=r10a,
R1B=r10b,
R2A=r20a,
R2B=r20b,
pA=pA,
pB=pB,
dw=dw,
k_AB=k_AB,
k_BA=k_BA,
tcp=tcp)
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
Rexpo_mat = matrix_exponential(R_mat)
# The the essential evolution matrix.
# This is a dot product of the outer [7][7] matrix of the Rexpo_mat and r180x matrixes, which
# have the shape [NE][NS][NM][NO][ND][7][7] and [7][7].
# This can be achieved by using numpy einsum, and where ellipsis notation will use the last axis.
evolution_matrix_mat = einsum('...ij,...jk', Rexpo_mat, r180x)
evolution_matrix_mat = einsum('...ij,...jk', evolution_matrix_mat,
Rexpo_mat)
evolution_matrix_mat = einsum('...ij,...jk', evolution_matrix_mat,
evolution_matrix_mat)
# Roll axis around.
evolution_matrix_T_mat = rollaxis(evolution_matrix_mat, 6, 5)
# Preform the initial magnetisation.
evolution_matrix_T_M0_mat = einsum('...ij,...jk', M0_T,
evolution_matrix_T_mat)
# Loop over the spins
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Extract number of points.
num_points_si_mi = int(num_points[0, si, mi, 0])
# Loop over the time points, back calculating the R2eff values.
for di in range(num_points_si_mi):
# Extract the values from the higher dimensional arrays.
inv_tcpmg_si_mi_di = inv_tcpmg[0, si, mi, 0, di]
power_si_mi_di = int(power[0, si, mi, 0, di])
r20a_si_mi_di = r20a[0, si, mi, 0, di]
# Initial magnetisation.
Mint_T_i = evolution_matrix_T_M0_mat[0, si, mi, 0, di]
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
evolution_matrix_T_i = evolution_matrix_T_mat[0, si, mi, 0, di]
# Get which power to raise the matrix to.
l = int(power_si_mi_di - 1)
# Raise the square evolution matrix to the power l.
evolution_matrix_T_power_i = matrix_power(
evolution_matrix_T_i, l)
# Evolve the magnetisation.
Mint_T_i = dot(Mint_T_i, evolution_matrix_T_power_i)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
Mx = Mint_T_i[0][1] / pA
if Mx <= 0.0 or isNaN(Mx):
back_calc[0, si, mi, 0, di] = r20a_si_mi_di
else:
back_calc[0, si, mi, 0, di] = -inv_tcpmg_si_mi_di * log(Mx)
# Replace data in array.
# If dw is zero.
if t_dw_zero:
back_calc[mask_dw_zero.mask] = r20a[mask_dw_zero.mask]
# Catch errors, taking a sum over array is the fastest way to check for
# +/- inf (infinity) and nan (not a number).
if not isfinite(sum(back_calc)):
# Replaces nan, inf, etc. with fill value.
fix_invalid(back_calc, copy=False, fill_value=1e100)
def r2eff_ns_cpmg_2site_star(M0=None, r20a=None, r20b=None, pA=None, dw=None, dw_orig=None, kex=None, inv_tcpmg=None, tcp=None, back_calc=None, num_points=None, power=None):
"""The 2-site numerical solution to the Bloch-McConnell equation using complex conjugate matrices.
This function calculates and stores the R2eff values.
@keyword M0: This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
@type M0: numpy float64, rank-1, 2D array
@keyword r20a: The R2 value for state A in the absence of exchange.
@type r20a: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword r20b: The R2 value for state B in the absence of exchange.
@type r20b: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword pA: The population of state A.
@type pA: float
@keyword dw: The chemical exchange difference between states A and B in rad/s.
@type dw: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword dw_orig: The chemical exchange difference between states A and B in ppm. This is only for faster checking of zero value, which result in no exchange.
@type dw_orig: numpy float array of rank-1
@keyword kex: The kex parameter value (the exchange rate in rad/s).
@type kex: float
@keyword inv_tcpmg: The inverse of the total duration of the CPMG element (in inverse seconds).
@type inv_tcpmg: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword tcp: The tau_CPMG times (1 / 4.nu1).
@type tcp: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword back_calc: The array for holding the back calculated R2eff values. Each element corresponds to one of the CPMG nu1 frequencies.
@type back_calc: numpy float array of rank [NE][NS][NM][NO][ND]
@keyword num_points: The number of points on the dispersion curve, equal to the length of the tcp and back_calc arguments.
@type num_points: numpy int array of rank [NE][NS][NM][NO]
@keyword power: The matrix exponential power array.
@type power: numpy int array of rank [NE][NS][NM][NO][ND]
"""
# Flag to tell if values should be replaced if math function is violated.
t_dw_zero = False
# Catch parameter values that will result in no exchange, returning flat R2eff = R20 lines (when kex = 0.0, k_AB = 0.0).
if pA == 1.0 or kex == 0.0:
back_calc[:] = r20a
return
# Test if dw is zero. Create a mask for the affected spins to replace these with R20 at the end of the calculationWait for replacement, since this is spin specific.
if min(fabs(dw_orig)) == 0.0:
t_dw_zero = True
mask_dw_zero = masked_where(dw == 0.0, dw)
# Once off parameter conversions.
pB = 1.0 - pA
k_BA = pA * kex
k_AB = pB * kex
# This is a vector that contains the initial magnetizations corresponding to the A and B state transverse magnetizations.
M0[0] = pA
M0[1] = pB
# Extract the total numbers of experiments, number of spins, number of magnetic field strength, number of offsets, maximum number of dispersion point.
NE, NS, NM, NO, ND = back_calc.shape
# The matrix R that contains all the contributions to the evolution, i.e. relaxation, exchange and chemical shift evolution.
R_mat, cR2_mat, Rr_mat, Rex_mat, RCS_mat = rcpmg_star_rankN(R2A=r20a, R2B=r20b, dw=dw, k_AB=k_AB, k_BA=k_BA, tcp=tcp)
# The the essential evolution matrix.
# This matrix is a propagator that will evolve the magnetization with the matrix R for a delay tcp.
eR_mat = matrix_exponential(R_mat)
ecR2_mat = matrix_exponential(cR2_mat)
# Preform the matrix.
# This is the propagator for an element of [delay tcp; 180 deg pulse; 2 times delay tcp; 180 deg pulse; delay tau], i.e. for 2 times tau-180-tau.
prop_2_mat = evolution_matrix_mat = einsum('...ij, ...jk', eR_mat, ecR2_mat)
prop_2_mat = evolution_matrix_mat = einsum('...ij, ...jk', prop_2_mat, eR_mat)
# Loop over the spins
for si in range(NS):
# Loop over the spectrometer frequencies.
for mi in range(NM):
# Extract the values from the higher dimensional arrays.
num_points_si_mi = int(num_points[0, si, mi, 0])
# Loop over the time points, back calculating the R2eff values.
for di in range(num_points_si_mi):
# Extract the values from the higher dimensional arrays.
power_si_mi_di = int(power[0, si, mi, 0, di])
# This is the propagator for an element of [delay tcp; 180 deg pulse; 2 times delay tcp; 180 deg pulse; delay tau], i.e. for 2 times tau-180-tau.
prop_2_i = prop_2_mat[0, si, mi, 0, di]
# Now create the total propagator that will evolve the magnetization under the CPMG train, i.e. it applies the above tau-180-tau-tau-180-tau so many times as required for the CPMG frequency under consideration.
prop_total = matrix_power(prop_2_i, power_si_mi_di)
# Now we apply the above propagator to the initial magnetization vector - resulting in the magnetization that remains after the full CPMG pulse train. It is called M of t (t is the time after the CPMG train).
Moft = dot(prop_total, M0)
# The next lines calculate the R2eff using a two-point approximation, i.e. assuming that the decay is mono-exponential.
Mx = Moft[0].real / M0[0]
if Mx <= 0.0 or isNaN(Mx):
back_calc[0, si, mi, 0, di] = 1e99
else:
back_calc[0, si, mi, 0, di]= -inv_tcpmg[0, si, mi, 0, di] * log(Mx)
# Replace data in array.
# If dw is zero.
if t_dw_zero:
back_calc[mask_dw_zero.mask] = r20a[mask_dw_zero.mask]
# Catch errors, taking a sum over array is the fastest way to check for
# +/- inf (infinity) and nan (not a number).
if not isfinite(sum(back_calc)):
# Replaces nan, inf, etc. with fill value.
fix_invalid(back_calc, copy=False, fill_value=1e100)
