def add_depend_reverse(head1, head2):
"""
利用链表翻转实现链表节点值相加
:type head1:Node
:type head2:Node
:param head1:
:param head2:
:return:
"""
head1_reverse = head1.reverse()
head2_reverse = head2.reverse()
carry = 0
result = None
while head1_reverse or head2_reverse:
h1 = head1_reverse.value if head1_reverse else 0
h2 = head2_reverse.value if head2_reverse else 0
sun = carry + h1 + h2
carry = math.floor(sun / 10)
node = result
result = Node(sun % 10)
result.next = node
head1_reverse = head1_reverse.next if head1_reverse else None
head2_reverse = head2_reverse.next if head2_reverse else None
# 最后可能有进位
if carry:
node = result
result = Node(1)
result.next = node
return result
def test_property_setter_next(self):
next_node = Node(2)
node = Node(1)
node.next = next_node
self.assertEqual(id(node.next), id(next_node))
with self.assertRaises(TypeError):
node.next = 1
def test_for_multiple_nodes(self):
node2 = Node(2)
node1 = Node(1, node2)
self.assertIsNone(node2.next())
node1.append(3)
self.assertIsNotNone(node2.next(), None)
self.assertEqual(node2.next().value(), 3)
def add_depend_list(head1, head2):
"""
利用列表(栈)实现链表节点值相加
:type head1:Node
:type head2:Node
:param head1:
:param head2:
:return:
"""
head1_list = []
head2_list = []
while head1:
head1_list.append(head1.value)
head1 = head1.next
while head2:
head2_list.append(head2.value)
head2 = head2.next
carry = 0
result = None
while head1_list or head2_list:
h1 = head1_list.pop() if head1_list else 0
h2 = head2_list.pop() if head2_list else 0
sun = h1 + h2 + carry
node = result
result = Node(sun % 10)
result.next = node
carry = math.floor(sun / 10)
# 最后可能有进位
if carry:
node = result
result = Node(1)
result.next = node
return result
def test_add_last_in_list(self):
head = Node(123)
to_be_last_node = Node(555)
head.next = to_be_last_node
to_be_last_node.next = Node(7656)
self.linked_list.head = head
self.helper.helper_add_last_in_list(self.linked_list, to_be_last_node)
def test_delete_node_after_head(self):
head = Node(6)
after_node = Node(100)
node_to_delete = Node(8528)
head.next = node_to_delete
node_to_delete.next = after_node
self.helper.helper_delete_node_after_head(self.linked_list, head, node_to_delete)
def test_linking_nodes(self):
node1 = Node('A')
node2 = Node('B')
node3 = Node('C')
# Link nodes together
node1.next = node2
node2.next = node3
# Node links should be transitive
assert node1.next is node2 # One link
assert node1.next.next is node3 # Two links
def ll_1():
el1 = Node(3)
el2 = Node(4)
el3 = Node(5)
el4 = Node(8)
el1.next = el2
el2.next = el3
el3.next = el4
el4.next = None
return LinkedList(el1)
def insert_before(self, index, value):
newnode = Node(value)
if index == 0:
newnode.next = self.head_node
if self.head_node == None: # insert_before(0,*) should still work on an empty list
self.tail_node = newnode
self.head_node = newnode
else:
node = self.get_node_by_index(index - 1)
newnode.next = node.next
node.next = newnode
self.list_length += 1
def ll_cycle():
el1 = Node(2)
el2 = Node(4)
el3 = Node(8)
el4 = Node(11)
el1.next = el2
el2.next = el3
el3.next = el4
el4.next = el2
return LinkedList(el1)
def insert_before(self, index, value):
newnode = Node(value)
if index == 0:
newnode.next = self.head_node
if self.head_node == None: # insert_before(0,*) should still work on an empty list
self.tail_node = newnode
self.head_node = newnode
else:
node = self.get_node_by_index(index - 1)
newnode.next = node.next
node.next = newnode
self.list_length += 1
def test_delete_node_after_head(self):
head = Node(6)
after_node = Node(100)
node_to_delete = Node(8528)
head.next = node_to_delete
node_to_delete.prev = head
node_to_delete.next = after_node
after_node.prev = node_to_delete
self.helper.helper_delete_node_after_head(self.linked_list, head, node_to_delete)
self.assertEqual(after_node.prev, head)
def testNext(self):
node = Node(data="data",next=None)
first_node = Node(data="first",next=node)
self.assertEqual(first_node.next,node)
third = Node(data="third",next=None)
node.next = third
self.assertEqual(node.next,third)
def insert(self, item_new, pos):
"""given an item and a position, this method insert an item at the position required"""
actual_position = 0
previous_position = None
current = self.head
new_node = Node(None, item_new)
while actual_position != pos and current is not None:
previous_position = current
current = current.next
actual_position += 1
if actual_position != pos:
raise ValueError("Invalid Position %d" % pos)
previous_position.next = new_node
new_node.next = current
new_node.previous = previous_position
if current is None:
self.tail = new_node
else:
current.previous = new_node
return self
def add_numbers(node_1, node_2):
"""Recursive math is delightful."""
# First, get the next nodes for node_1 and node_2
if node_1 is not None:
next_1 = node_1.next
next_2 = node_2.next
# Computer the value for the next step to build up
result_node, carryover = add_numbers(next_1, next_2)
# Sum the two values and the carryover
sum_value = node_1.data + node_2.data + carryover
# Take the modulo 10 number and assign it to digit
digit = sum_value % 10
# Flat divide by ten and assign that to carryover
carryover = sum_value // 10
# Create our new node with the digit
new_node = Node(digit)
# Assign the result of the next step as the next node
new_node.next = result_node
return (new_node, carryover)
# End of the list, recursion stops
else:
return (None, 0)
def test_find_loop_start(self):
print('Test: Empty list')
linked_list = MyLinkedList()
assert_equal(linked_list.find_loop_start(), None)
print('Test: Not a circular linked list: One element')
head = Node(1)
linked_list = MyLinkedList(head)
assert_equal(linked_list.find_loop_start(), None)
print('Test: Not a circular linked list: Two elements')
linked_list.append(2)
assert_equal(linked_list.find_loop_start(), None)
print('Test: Not a circular linked list: Three or more elements')
linked_list.append(3)
assert_equal(linked_list.find_loop_start(), None)
print('Test: General case: Circular linked list')
node10 = Node(10)
node9 = Node(9, node10)
node8 = Node(8, node9)
node7 = Node(7, node8)
node6 = Node(6, node7)
node5 = Node(5, node6)
node4 = Node(4, node5)
node3 = Node(3, node4)
node2 = Node(2, node3)
node1 = Node(1, node2)
node0 = Node(0, node1)
node10.next = node3
linked_list = MyLinkedList(node0)
assert_equal(linked_list.find_loop_start(), node3)
print('Success: test_find_loop_start')
def test_node_set_next():
first_node = Node(4)
second_node = Node(5)
first_node.next = second_node
assert first_node.next.data == 5
def testNext(self):
node = Node(data="data", next=None)
first_node = Node(data="first", next=node)
self.assertEqual(first_node.next, node)
third = Node(data="third", next=None)
node.next = third
self.assertEqual(node.next, third)
def add_forward(node1, node2):
if not node1 and not node2:
return (None, 0)
next, carry = add_forward(node1.next, node2.next)
q, r = divmod(node1.value + node2.value + carry, 10)
node = Node(r)
node.next = next
return (node, q)
def insert_after(self, index, value):
node = self.get_node_by_index(index)
newnode = Node(value)
newnode.next = node.next
node.next = newnode
if newnode.next == None:
self.tail_node = newnode
self.list_length += 1
def add_forward(node1, node2):
if not node1 and not node2:
return (None, 0)
next, carry = add_forward(node1.next, node2.next)
q, r = divmod(node1.value + node2.value + carry, 10)
node = Node(r)
node.next = next
return (node, q)
def reverse_and_clone(node):
head = None
while node != None:
new_node = Node(node.data)
new_node.next = head
head = new_node
node = node.next
return head
def insert_after(self, index, value):
node = self.get_node_by_index(index)
newnode = Node(value)
newnode.next = node.next
node.next = newnode
if newnode.next == None:
self.tail_node = newnode
self.list_length += 1
def push(self, data):
node = Node(data)
if self.top is None:
self.top = node
self.size = self.size + 1
else:
node.next = self.top
self.top = node
self.size = self.size + 1
def push(self, data):
node = Node(data)
if not self._head:
self._head = node
else:
node.next = self._head
self._head = node
self._size += 1
def linked_list_intro_play(self):
""" Linked List | Set 1 (Introduction)"""
# Steps are:
# 1. Create an empty list
# 2. Create nodes
# 3. Link the nodes.
# Start with the empty list
llist = LinkedList()
llist.head = Node(1)
second = Node(2)
third = Node(3)
'''
Three nodes have been created.
We have references to these three blocks as first,
second and third
llist.head second third
| | |
| | |
+----+------+ +----+------+ +----+------+
| 1 | None | | 2 | None | | 3 | None |
+----+------+ +----+------+ +----+------+
'''
llist.head.next = second # Link first node with second
'''
Now next of first Node refers to second. So they
both are linked.
llist.head second third
| | |
| | |
+----+------+ +----+------+ +----+------+
| 1 | o-------->| 2 | null | | 3 | null |
+----+------+ +----+------+ +----+------+
'''
second.next = third # Link second node with the third node
'''
Now next of second Node refers to third. So all three
nodes are linked.
llist.head second third
| | |
| | |
+----+------+ +----+------+ +----+------+
| 1 | o-------->| 2 | o-------->| 3 | null |
+----+------+ +----+------+ +----+------+
'''
# traversing the entire linked list and printing
llist.print_list()
def delete_node(node: Node) -> None:
'''
Overwrite each value of a linked list, starting from the node we are given to delete.
'''
while node.next != None:
node.val = node.next.val
if node.next.next == None:
node.next = None
else:
node = node.next
def reverseList(head: Node) -> Node:
if head == None or head.next == None:
return head
# reversed_list = 뒤집어진 리스트의 Head node
reversed_list = reverseList(head.next)
head.next.next = head
head.next = None
return reversed_list
def insert_in_sorted_list(node, item):
previous = None
current = node.head
stop = False
while current != None and not stop:
if current.data > item:
stop = True
else:
previous = current
current = current.next
temp = Node(item)
if previous == None:
temp.next = node.head
node.head = temp
else:
temp.next = current
previous.next = temp
def insert_at_middle(head, data, position):
temp = head
pos = 0
while temp.next:
old_node = temp
new_node = temp.next
temp = temp.next
pos += 1
if position == pos:
node_to_insert = Node(data)
old_node.next = node_to_insert
node_to_insert.next = new_node
def test_llist_init_str_repr(llist):
first_node = Node(1)
second_node = Node('a')
assert str(llist) == 'None'
assert repr(llist) == 'LinkedList()'
llist.head = first_node
first_node.next = second_node
assert str(llist) == '1 -> a -> None'
assert repr(llist) == 'LinkedList(1, a)'
llist = LinkedList([2, 'b'])
assert str(llist) == '2 -> b -> None'
assert repr(llist) == 'LinkedList(2, b)'
def reverse(linked_list):
# HINT: Create New Nodes
pre_node = None
reversed_linked_list = LinkedList()
for value in linked_list:
new_node = Node(value)
new_node.next = pre_node
pre_node = new_node
reversed_linked_list.head = pre_node
return reversed_linked_list
def add_reversed(node1, node2, carry):
if not node1 and not node2 and carry == 0:
return
sum = carry
if node1:
sum += node1.value
if node2:
sum += node2.value
q, r = divmod(sum, 10)
node = Node(r)
node.next = add_reversed(node1.next if node1 else None,
node2.next if node2 else None, q)
return node
def delete_n_th_reversed(head: Node, n: int):
sentinel = Node(0)
sentinel.next = head
p = sentinel
q = sentinel
for _ in range(n + 1):
p = p.next
while p:
p = p.next
q = q.next
q.next = q.next.next
return sentinel.next
def reverse_2(head: Node):
"""
递归
:param head:
:return:
"""
# 找到最后一个节点
if head.next is None or head is None:
return head
new_head = reverse_2(head.next)
head.next.next = head
head.next = None
return new_head
def add_reversed(node1, node2, carry):
if not node1 and not node2 and carry == 0:
return
sum = carry
if node1:
sum += node1.value
if node2:
sum += node2.value
q, r = divmod(sum, 10)
node = Node(r)
node.next = add_reversed(node1.next if node1 else None,
node2.next if node2 else None,
q)
return node
def solution2(head1, head2):
# If linked lists have different lengths, pad with 0s
len1, len2 = length(head1), length(head2)
if len1 < len2:
head1 = pad_with_zeros(head1, len2-len1)
elif len1 > len2:
head2 = pad_with_zeros(head2, len1-len2)
# Now that the linked lists are of equal size, add them
head, carry = add_forward(head1, head2)
if carry != 0:
node = Node(carry)
node.next, head = head, node # insert at front
return head
def pad_with_zeros(head, count):
for i in range(count):
node = Node(0)
node.next, head = head, node # insert at front
return head
def test_node_str_representation_with_next(self):
n = Node(9)
n.next = Node('X')
self.assertEqual(str(n), "Node(9) > Node(X)")
if length == 1:
return node.next
if length == 2:
if node.value == node.next.value:
return node.next.next
else:
return -1
last_node = visit(node.next, length-2)
if last_node != -1:
if node.value == last_node.value:
return last_node.next
return -1
def palindrome(head):
length = 0
node = head
while node:
length += 1
node = node.next
print visit(head, length)
head = Node('r')
head.next = Node('a')
head.next.next = Node('d')
head.next.next.next = Node('a')
head.next.next.next.next = Node('r')
palindrome(head) # None if palindrome, -1 otherwise
prev= None current = n1 while current!=None: right = current.next current.next = prev prev = current current = right return prev def printList(n): while n!= None: print n.value n = n.next n1 = Node(1) n2 = Node(2) n3 = Node(3) n4 = Node(4) n5 = Node(5) n1.next = n2 n2.next = n3 n3.next = n4 n4.next = n5 n5.next = None printList(n1) nret = reverse(n1) print nret.value printList(nret)
from linked_list import Node
acyclic = Node(1, Node(2, Node(3)))
cyclic = Node(1)
cyclic.next = Node(2, Node(3, Node(4, cyclic)))
def node_generator(node):
while node:
yield node
node=node.next
def is_cyclic(node):
faster_generator = node_generator(node)
slower_generator = node_generator(node)
try:
next(faster_generator)
for item in slower_generator: #item = 3
item0 = next(faster_generator) # item0 = 2
item1 = next(faster_generator) # item1 = 3
if id(item) == id(item0) or id(item) == id(item1):
return True
except StopIteration:
pass
return False
print(is_cyclic(acyclic))
print(is_cyclic(cyclic))
