def main():
logmgr = LogManager("mylog.dat", "w") # , comm=...
# set a run property
logmgr.set_constant("myconst", uniform(0, 1))
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
logmgr.add_quantity(vis_timer)
logmgr.add_quantity(Fifteen("fifteen"))
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
for istep in range(200):
logmgr.tick_before()
dt = uniform(0.01, 0.1)
set_dt(logmgr, dt)
sleep(dt)
# Illustrate custom timers
if istep % 10 == 0:
with vis_timer.start_sub_timer():
sleep(0.05)
# Illustrate warnings capture
if uniform(0, 1) < 0.05:
warn("Oof. Something went awry.")
logmgr.tick_after()
logmgr.close()
def initialize_logmgr(enable_logmgr: bool,
filename: str = None,
mode: str = "wu",
mpi_comm=None) -> LogManager:
"""Create and initialize a mirgecom-specific :class:`logpyle.LogManager`."""
if not enable_logmgr:
return None
logmgr = LogManager(filename=filename, mode=mode, mpi_comm=mpi_comm)
add_run_info(logmgr)
add_package_versions(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
try:
logmgr.add_quantity(PythonMemoryUsage())
except ImportError:
from warnings import warn
warn("psutil module not found, not tracking memory consumption."
"Install it with 'pip install psutil'")
return logmgr
def main(write_output=True, flux_type_arg="upwind"):
from grudge.tools import mem_checkpoint
from math import sin, cos, pi, sqrt
from math import floor
from grudge.backends import guess_run_context
rcon = guess_run_context()
def f(x):
return sin(pi*x)
def u_analytic(x, el, t):
return f((-numpy.dot(v, x)/norm_v+t*norm_v))
def boundary_tagger(vertices, el, face_nr, all_v):
if numpy.dot(el.face_normals[face_nr], v) < 0:
return ["inflow"]
else:
return ["outflow"]
dim = 2
if dim == 1:
v = numpy.array([1])
if rcon.is_head_rank:
from grudge.mesh.generator import make_uniform_1d_mesh
mesh = make_uniform_1d_mesh(0, 2, 10, periodic=True)
elif dim == 2:
v = numpy.array([2,0])
if rcon.is_head_rank:
from grudge.mesh.generator import make_disk_mesh
mesh = make_disk_mesh(boundary_tagger=boundary_tagger)
elif dim == 3:
v = numpy.array([0,0,1])
if rcon.is_head_rank:
from grudge.mesh.generator import make_cylinder_mesh, make_ball_mesh, make_box_mesh
mesh = make_cylinder_mesh(max_volume=0.04, height=2, boundary_tagger=boundary_tagger,
periodic=False, radial_subdivisions=32)
else:
raise RuntimeError("bad number of dimensions")
norm_v = la.norm(v)
if rcon.is_head_rank:
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
if dim != 1:
mesh_data = mesh_data.reordered_by("cuthill")
discr = rcon.make_discretization(mesh_data, order=4)
vis_discr = discr
from grudge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(vis_discr, rcon, "fld")
# operator setup ----------------------------------------------------------
from grudge.data import \
ConstantGivenFunction, \
TimeConstantGivenFunction, \
TimeDependentGivenFunction
from grudge.models.advection import StrongAdvectionOperator, WeakAdvectionOperator
op = WeakAdvectionOperator(v,
inflow_u=TimeDependentGivenFunction(u_analytic),
flux_type=flux_type_arg)
u = discr.interpolate_volume_function(lambda x, el: u_analytic(x, el, 0))
# timestep setup ----------------------------------------------------------
from grudge.timestep.runge_kutta import LSRK4TimeStepper
stepper = LSRK4TimeStepper()
if rcon.is_head_rank:
print("%d elements" % len(discr.mesh.elements))
# diagnostics setup -------------------------------------------------------
from logpyle import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "advection.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
from grudge.log import Integral, LpNorm
u_getter = lambda: u
logmgr.add_quantity(Integral(u_getter, discr, name="int_u"))
logmgr.add_quantity(LpNorm(u_getter, discr, p=1, name="l1_u"))
logmgr.add_quantity(LpNorm(u_getter, discr, name="l2_u"))
logmgr.add_watches(["step.max", "t_sim.max", "l2_u", "t_step.max"])
# timestep loop -----------------------------------------------------------
rhs = op.bind(discr)
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=3, logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(discr,
stepper=stepper, t=t, fields=u))
for step, t, dt in step_it:
if step % 5 == 0 and write_output:
visf = vis.make_file("fld-%04d" % step)
vis.add_data(visf, [
("u", discr.convert_volume(u, kind="numpy")),
], time=t, step=step)
visf.close()
u = stepper(u, t, dt, rhs)
true_u = discr.interpolate_volume_function(lambda x, el: u_analytic(x, el, t))
print(discr.norm(u-true_u))
assert discr.norm(u-true_u) < 1e-2
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def simple_wave_entrypoint(dim=2, num_elems=256, order=4, num_steps=30,
log_filename="grudge.dat"):
cl_ctx = cl.create_some_context()
queue = cl.CommandQueue(cl_ctx)
from mpi4py import MPI
comm = MPI.COMM_WORLD
num_parts = comm.Get_size()
n = int(num_elems ** (1./dim))
from meshmode.distributed import MPIMeshDistributor
mesh_dist = MPIMeshDistributor(comm)
if mesh_dist.is_mananger_rank():
from meshmode.mesh.generation import generate_regular_rect_mesh
mesh = generate_regular_rect_mesh(a=(-0.5,)*dim,
b=(0.5,)*dim,
n=(n,)*dim)
from pymetis import part_graph
_, p = part_graph(num_parts,
xadj=mesh.nodal_adjacency.neighbors_starts.tolist(),
adjncy=mesh.nodal_adjacency.neighbors.tolist())
part_per_element = np.array(p)
local_mesh = mesh_dist.send_mesh_parts(mesh, part_per_element, num_parts)
else:
local_mesh = mesh_dist.receive_mesh_part()
vol_discr = DGDiscretizationWithBoundaries(cl_ctx, local_mesh, order=order,
mpi_communicator=comm)
source_center = np.array([0.1, 0.22, 0.33])[:local_mesh.dim]
source_width = 0.05
source_omega = 3
sym_x = sym.nodes(local_mesh.dim)
sym_source_center_dist = sym_x - source_center
sym_t = sym.ScalarVariable("t")
from grudge.models.wave import StrongWaveOperator
from meshmode.mesh import BTAG_ALL, BTAG_NONE
op = StrongWaveOperator(-0.1, vol_discr.dim,
source_f=(
sym.sin(source_omega*sym_t)
* sym.exp(
-np.dot(sym_source_center_dist, sym_source_center_dist)
/ source_width**2)),
dirichlet_tag=BTAG_NONE,
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_ALL,
flux_type="upwind")
from pytools.obj_array import join_fields
fields = join_fields(vol_discr.zeros(queue),
[vol_discr.zeros(queue) for i in range(vol_discr.dim)])
from logpyle import LogManager, \
add_general_quantities, \
add_run_info, \
IntervalTimer, EventCounter
# NOTE: LogManager hangs when using a file on a shared directory.
logmgr = LogManager(log_filename, "w", comm)
add_run_info(logmgr)
add_general_quantities(logmgr)
log_quantities =\
{"rank_data_swap_timer": IntervalTimer("rank_data_swap_timer",
"Time spent evaluating RankDataSwapAssign"),
"rank_data_swap_counter": EventCounter("rank_data_swap_counter",
"Number of RankDataSwapAssign instructions evaluated"),
"exec_timer": IntervalTimer("exec_timer",
"Total time spent executing instructions"),
"insn_eval_timer": IntervalTimer("insn_eval_timer",
"Time spend evaluating instructions"),
"future_eval_timer": IntervalTimer("future_eval_timer",
"Time spent evaluating futures"),
"busy_wait_timer": IntervalTimer("busy_wait_timer",
"Time wasted doing busy wait")}
for quantity in log_quantities.values():
logmgr.add_quantity(quantity)
bound_op = bind(vol_discr, op.sym_operator())
def rhs(t, w):
val, rhs.profile_data = bound_op(queue, profile_data=rhs.profile_data,
log_quantities=log_quantities,
t=t, w=w)
return val
rhs.profile_data = {}
dt = 0.04
dt_stepper = set_up_rk4("w", dt, fields, rhs)
logmgr.tick_before()
for event in dt_stepper.run(t_end=dt * num_steps):
if isinstance(event, dt_stepper.StateComputed):
logmgr.tick_after()
logmgr.tick_before()
logmgr.tick_after()
def print_profile_data(data):
print("""execute() for rank %d:
\tInstruction Evaluation: %f%%
\tFuture Evaluation: %f%%
\tBusy Wait: %f%%
\tTotal: %f seconds""" %
(comm.Get_rank(),
data['insn_eval_time'] / data['total_time'] * 100,
data['future_eval_time'] / data['total_time'] * 100,
data['busy_wait_time'] / data['total_time'] * 100,
data['total_time']))
print_profile_data(rhs.profile_data)
logmgr.close()
def mpi_communication_entrypoint():
cl_ctx = cl.create_some_context()
queue = cl.CommandQueue(cl_ctx)
actx = PyOpenCLArrayContext(queue)
from mpi4py import MPI
comm = MPI.COMM_WORLD
i_local_rank = comm.Get_rank()
num_parts = comm.Get_size()
from meshmode.distributed import MPIMeshDistributor, get_partition_by_pymetis
mesh_dist = MPIMeshDistributor(comm)
dim = 2
dt = 0.04
order = 4
if mesh_dist.is_mananger_rank():
from meshmode.mesh.generation import generate_regular_rect_mesh
mesh = generate_regular_rect_mesh(a=(-0.5, ) * dim,
b=(0.5, ) * dim,
nelements_per_axis=(16, ) * dim)
part_per_element = get_partition_by_pymetis(mesh, num_parts)
local_mesh = mesh_dist.send_mesh_parts(mesh, part_per_element,
num_parts)
else:
local_mesh = mesh_dist.receive_mesh_part()
vol_discr = DiscretizationCollection(actx,
local_mesh,
order=order,
mpi_communicator=comm)
source_center = np.array([0.1, 0.22, 0.33])[:local_mesh.dim]
source_width = 0.05
source_omega = 3
sym_x = sym.nodes(local_mesh.dim)
sym_source_center_dist = sym_x - source_center
sym_t = sym.ScalarVariable("t")
from grudge.models.wave import WeakWaveOperator
from meshmode.mesh import BTAG_ALL, BTAG_NONE
op = WeakWaveOperator(
0.1,
vol_discr.dim,
source_f=(
sym.sin(source_omega * sym_t) *
sym.exp(-np.dot(sym_source_center_dist, sym_source_center_dist) /
source_width**2)),
dirichlet_tag=BTAG_NONE,
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_ALL,
flux_type="upwind")
from pytools.obj_array import flat_obj_array
fields = flat_obj_array(
vol_discr.zeros(actx),
[vol_discr.zeros(actx) for i in range(vol_discr.dim)])
# FIXME
# dt = op.estimate_rk4_timestep(vol_discr, fields=fields)
# FIXME: Should meshmode consider BTAG_PARTITION to be a boundary?
# Fails because: "found faces without boundary conditions"
# op.check_bc_coverage(local_mesh)
from logpyle import LogManager, \
add_general_quantities, \
add_run_info, \
IntervalTimer, EventCounter
log_filename = None
# NOTE: LogManager hangs when using a file on a shared directory.
# log_filename = "grudge_log.dat"
logmgr = LogManager(log_filename, "w", comm)
add_run_info(logmgr)
add_general_quantities(logmgr)
log_quantities =\
{"rank_data_swap_timer": IntervalTimer("rank_data_swap_timer",
"Time spent evaluating RankDataSwapAssign"),
"rank_data_swap_counter": EventCounter("rank_data_swap_counter",
"Number of RankDataSwapAssign instructions evaluated"),
"exec_timer": IntervalTimer("exec_timer",
"Total time spent executing instructions"),
"insn_eval_timer": IntervalTimer("insn_eval_timer",
"Time spend evaluating instructions"),
"future_eval_timer": IntervalTimer("future_eval_timer",
"Time spent evaluating futures"),
"busy_wait_timer": IntervalTimer("busy_wait_timer",
"Time wasted doing busy wait")}
for quantity in log_quantities.values():
logmgr.add_quantity(quantity)
logger.debug("\n%s", sym.pretty(op.sym_operator()))
bound_op = bind(vol_discr, op.sym_operator())
def rhs(t, w):
val, rhs.profile_data = bound_op(profile_data=rhs.profile_data,
log_quantities=log_quantities,
t=t,
w=w)
return val
rhs.profile_data = {}
dt_stepper = set_up_rk4("w", dt, fields, rhs)
final_t = 4
nsteps = int(final_t / dt)
logger.info("[%04d] dt %.5e nsteps %4d", i_local_rank, dt, nsteps)
# from grudge.shortcuts import make_visualizer
# vis = make_visualizer(vol_discr, vis_order=order)
step = 0
norm = bind(vol_discr, sym.norm(2, sym.var("u")))
from time import time
t_last_step = time()
logmgr.tick_before()
for event in dt_stepper.run(t_end=final_t):
if isinstance(event, dt_stepper.StateComputed):
assert event.component_id == "w"
step += 1
logger.debug("[%04d] t = %.5e |u| = %.5e ellapsed %.5e", step,
event.t, norm(u=event.state_component[0]),
time() - t_last_step)
# if step % 10 == 0:
# vis.write_vtk_file("rank%d-fld-%04d.vtu" % (i_local_rank, step),
# [("u", event.state_component[0]),
# ("v", event.state_component[1:])])
t_last_step = time()
logmgr.tick_after()
logmgr.tick_before()
logmgr.tick_after()
def print_profile_data(data):
logger.info(
"""execute() for rank %d:\n
\tInstruction Evaluation: %g\n
\tFuture Evaluation: %g\n
\tBusy Wait: %g\n
\tTotal: %g seconds""", i_local_rank,
data["insn_eval_time"] / data["total_time"] * 100,
data["future_eval_time"] / data["total_time"] * 100,
data["busy_wait_time"] / data["total_time"] * 100,
data["total_time"])
print_profile_data(rhs.profile_data)
logmgr.close()
logger.info("Rank %d exiting", i_local_rank)
def mpi_communication_entrypoint():
cl_ctx = cl.create_some_context()
queue = cl.CommandQueue(cl_ctx)
actx = PyOpenCLArrayContext(queue, force_device_scalars=True)
from mpi4py import MPI
comm = MPI.COMM_WORLD
i_local_rank = comm.Get_rank()
num_parts = comm.Get_size()
from meshmode.distributed import MPIMeshDistributor, get_partition_by_pymetis
mesh_dist = MPIMeshDistributor(comm)
dim = 2
order = 4
if mesh_dist.is_mananger_rank():
from meshmode.mesh.generation import generate_regular_rect_mesh
mesh = generate_regular_rect_mesh(a=(-0.5,)*dim,
b=(0.5,)*dim,
nelements_per_axis=(16,)*dim)
part_per_element = get_partition_by_pymetis(mesh, num_parts)
local_mesh = mesh_dist.send_mesh_parts(mesh, part_per_element, num_parts)
del mesh
else:
local_mesh = mesh_dist.receive_mesh_part()
dcoll = DiscretizationCollection(actx, local_mesh, order=order,
mpi_communicator=comm)
def source_f(actx, dcoll, t=0):
source_center = np.array([0.1, 0.22, 0.33])[:dcoll.dim]
source_width = 0.05
source_omega = 3
nodes = thaw(dcoll.nodes(), actx)
source_center_dist = flat_obj_array(
[nodes[i] - source_center[i] for i in range(dcoll.dim)]
)
return (
np.sin(source_omega*t)
* actx.np.exp(
-np.dot(source_center_dist, source_center_dist)
/ source_width**2
)
)
from grudge.models.wave import WeakWaveOperator
from meshmode.mesh import BTAG_ALL, BTAG_NONE
wave_op = WeakWaveOperator(
dcoll,
0.1,
source_f=source_f,
dirichlet_tag=BTAG_NONE,
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_ALL,
flux_type="upwind"
)
fields = flat_obj_array(
dcoll.zeros(actx),
[dcoll.zeros(actx) for i in range(dcoll.dim)]
)
dt = actx.to_numpy(
2/3 * wave_op.estimate_rk4_timestep(actx, dcoll, fields=fields))
wave_op.check_bc_coverage(local_mesh)
from logpyle import LogManager, \
add_general_quantities, \
add_run_info
log_filename = None
# NOTE: LogManager hangs when using a file on a shared directory.
# log_filename = "grudge_log.dat"
logmgr = LogManager(log_filename, "w", comm)
add_run_info(logmgr)
add_general_quantities(logmgr)
def rhs(t, w):
return wave_op.operator(t, w)
dt_stepper = set_up_rk4("w", dt, fields, rhs)
final_t = 4
nsteps = int(final_t/dt)
logger.info("[%04d] dt %.5e nsteps %4d", i_local_rank, dt, nsteps)
step = 0
def norm(u):
return op.norm(dcoll, u, 2)
from time import time
t_last_step = time()
logmgr.tick_before()
for event in dt_stepper.run(t_end=final_t):
if isinstance(event, dt_stepper.StateComputed):
assert event.component_id == "w"
step += 1
logger.info("[%04d] t = %.5e |u| = %.5e ellapsed %.5e",
step, event.t,
norm(u=event.state_component[0]),
time() - t_last_step)
t_last_step = time()
logmgr.tick_after()
logmgr.tick_before()
logmgr.tick_after()
logmgr.close()
logger.info("Rank %d exiting", i_local_rank)
def main():
from grudge.backends import guess_run_context
rcon = guess_run_context(["cuda", "mpi"])
if rcon.is_head_rank:
mesh = make_wingmesh()
#from grudge.mesh import make_rect_mesh
#mesh = make_rect_mesh(
# boundary_tagger=lambda fvi, el, fn, all_v: ["inflow"])
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [3]:
from pytools import add_python_path_relative_to_script
add_python_path_relative_to_script("..")
from gas_dynamics_initials import UniformMachFlow
wing = UniformMachFlow(angle_of_attack=0)
from grudge.models.gas_dynamics import GasDynamicsOperator
op = GasDynamicsOperator(dimensions=3,
gamma=wing.gamma,
mu=wing.mu,
prandtl=wing.prandtl,
spec_gas_const=wing.spec_gas_const,
bc_inflow=wing,
bc_outflow=wing,
bc_noslip=wing,
inflow_tag="inflow",
outflow_tag="outflow",
noslip_tag="noslip")
discr = rcon.make_discretization(
mesh_data,
order=order,
debug=[
"cuda_no_plan",
#"cuda_dump_kernels",
#"dump_dataflow_graph",
#"dump_optemplate_stages",
#"dump_dataflow_graph",
#"print_op_code"
"cuda_no_metis",
],
default_scalar_type=numpy.float64,
tune_for=op.sym_operator())
from grudge.visualization import SiloVisualizer, VtkVisualizer
#vis = VtkVisualizer(discr, rcon, "shearflow-%d" % order)
vis = SiloVisualizer(discr, rcon)
fields = wing.volume_interpolant(0, discr)
navierstokes_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = navierstokes_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
from grudge.timestep import RK4TimeStepper
stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
logmgr = LogManager("navierstokes-%d.dat" % order, "w",
rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -------------------------------------------------------
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=200,
#max_steps=500,
logmgr=logmgr,
max_dt_getter=lambda t: 0.6 * op.estimate_timestep(
discr, stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
if step % 200 == 0:
#if False:
visf = vis.make_file("wing-%d-%06d" % (order, step))
#rhs_fields = rhs(t, fields)
from pyvisfile.silo import DB_VARTYPE_VECTOR
from grudge.discretization import ones_on_boundary
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("rhs_rho", discr.convert_volume(op.rho(rhs_fields), kind="numpy")),
#("rhs_e", discr.convert_volume(op.e(rhs_fields), kind="numpy")),
#("rhs_rho_u", discr.convert_volume(op.rho_u(rhs_fields), kind="numpy")),
],
expressions=[
("p", "(0.4)*(e- 0.5*(rho_u*u))"),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
t += dt
finally:
vis.close()
logmgr.save()
discr.close()
def main(write_output=True):
from grudge.backends import guess_run_context
rcon = guess_run_context(
#["cuda"]
)
gamma = 1.4
# at A=1 we have case of isentropic vortex, source terms
# arise for other values
densityA = 2.0
from grudge.tools import EOCRecorder, to_obj_array
eoc_rec = EOCRecorder()
if rcon.is_head_rank:
from grudge.mesh import \
make_rect_mesh, \
make_centered_regular_rect_mesh
refine = 1
mesh = make_centered_regular_rect_mesh((0, -5), (10, 5),
n=(9, 9),
post_refine_factor=refine)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [4, 5]:
discr = rcon.make_discretization(
mesh_data,
order=order,
debug=[ #"cuda_no_plan",
#"print_op_code"
],
default_scalar_type=numpy.float64)
from grudge.visualization import SiloVisualizer, VtkVisualizer
#vis = VtkVisualizer(discr, rcon, "vortex-%d" % order)
vis = SiloVisualizer(discr, rcon)
vortex = Vortex(beta=5,
gamma=gamma,
center=[5, 0],
velocity=[1, 0],
densityA=densityA)
fields = vortex.volume_interpolant(0, discr)
sources = SourceTerms(beta=5,
gamma=gamma,
center=[5, 0],
velocity=[1, 0],
densityA=densityA)
from grudge.models.gas_dynamics import (GasDynamicsOperator,
GammaLawEOS)
from grudge.mesh import BTAG_ALL
op = GasDynamicsOperator(dimensions=2,
mu=0.0,
prandtl=0.72,
spec_gas_const=287.1,
equation_of_state=GammaLawEOS(vortex.gamma),
bc_inflow=vortex,
bc_outflow=vortex,
bc_noslip=vortex,
inflow_tag=BTAG_ALL,
source=sources)
euler_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = euler_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
# limiter setup -------------------------------------------------------
from grudge.models.gas_dynamics import SlopeLimiter1NEuler
limiter = SlopeLimiter1NEuler(discr, gamma, 2, op)
# time stepper --------------------------------------------------------
from grudge.timestep import SSPRK3TimeStepper, RK4TimeStepper
#stepper = SSPRK3TimeStepper(limiter=limiter)
#stepper = SSPRK3TimeStepper()
stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
log_file_name = "euler-%d.dat" % order
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -------------------------------------------------------
t = 0
#fields = limiter(fields)
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=.1,
#max_steps=500,
logmgr=logmgr,
max_dt_getter=lambda t: 0.4 * op.estimate_timestep(
discr, stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
if step % 1 == 0 and write_output:
#if False:
visf = vis.make_file("vortex-%d-%04d" % (order, step))
true_fields = vortex.volume_interpolant(t, discr)
#rhs_fields = rhs(t, fields)
from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", discr.convert_volume(op.rho(true_fields), kind="numpy")),
#("true_e", discr.convert_volume(op.e(true_fields), kind="numpy")),
#("true_rho_u", discr.convert_volume(op.rho_u(true_fields), kind="numpy")),
#("true_u", discr.convert_volume(op.u(true_fields), kind="numpy")),
#("rhs_rho", discr.convert_volume(op.rho(rhs_fields), kind="numpy")),
#("rhs_e", discr.convert_volume(op.e(rhs_fields), kind="numpy")),
#("rhs_rho_u", discr.convert_volume(op.rho_u(rhs_fields), kind="numpy")),
],
expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
("p", "0.4*(e- 0.5*(rho_u*u))"),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
true_fields = vortex.volume_interpolant(t, discr)
l2_error = discr.norm(fields - true_fields)
l2_error_rho = discr.norm(op.rho(fields) - op.rho(true_fields))
l2_error_e = discr.norm(op.e(fields) - op.e(true_fields))
l2_error_rhou = discr.norm(
op.rho_u(fields) - op.rho_u(true_fields))
l2_error_u = discr.norm(op.u(fields) - op.u(true_fields))
eoc_rec.add_data_point(order, l2_error_rho)
print()
print(eoc_rec.pretty_print("P.Deg.", "L2 Error"))
logmgr.set_constant("l2_error", l2_error)
logmgr.set_constant("l2_error_rho", l2_error_rho)
logmgr.set_constant("l2_error_e", l2_error_e)
logmgr.set_constant("l2_error_rhou", l2_error_rhou)
logmgr.set_constant("l2_error_u", l2_error_u)
logmgr.set_constant("refinement", refine)
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main(write_output=True):
from pytools import add_python_path_relative_to_script
add_python_path_relative_to_script("..")
from grudge.backends import guess_run_context
rcon = guess_run_context()
from grudge.tools import EOCRecorder
eoc_rec = EOCRecorder()
if rcon.is_head_rank:
from grudge.mesh.generator import \
make_rect_mesh, \
make_centered_regular_rect_mesh
refine = 4
mesh = make_centered_regular_rect_mesh((0, -5), (10, 5),
n=(9, 9),
post_refine_factor=refine)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
# a second mesh to regrid to
if rcon.is_head_rank:
from grudge.mesh.generator import \
make_rect_mesh, \
make_centered_regular_rect_mesh
refine = 4
mesh2 = make_centered_regular_rect_mesh((0, -5), (10, 5),
n=(8, 8),
post_refine_factor=refine)
mesh_data2 = rcon.distribute_mesh(mesh2)
else:
mesh_data2 = rcon.receive_mesh()
for order in [3, 4]:
discr = rcon.make_discretization(mesh_data,
order=order,
default_scalar_type=numpy.float64,
quad_min_degrees={
"gasdyn_vol": 3 * order,
"gasdyn_face": 3 * order,
})
discr2 = rcon.make_discretization(mesh_data2,
order=order,
default_scalar_type=numpy.float64,
quad_min_degrees={
"gasdyn_vol": 3 * order,
"gasdyn_face": 3 * order,
})
from grudge.visualization import SiloVisualizer, VtkVisualizer
vis = VtkVisualizer(discr, rcon, "vortex-%d" % order)
#vis = SiloVisualizer(discr, rcon)
from gas_dynamics_initials import Vortex
vortex = Vortex()
fields = vortex.volume_interpolant(0, discr)
from grudge.models.gas_dynamics import GasDynamicsOperator
from grudge.mesh import BTAG_ALL
op = GasDynamicsOperator(dimensions=2,
gamma=vortex.gamma,
mu=vortex.mu,
prandtl=vortex.prandtl,
spec_gas_const=vortex.spec_gas_const,
bc_inflow=vortex,
bc_outflow=vortex,
bc_noslip=vortex,
inflow_tag=BTAG_ALL,
source=None)
euler_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = euler_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements for mesh 1 =", len(mesh.elements))
print("#elements for mesh 2 =", len(mesh2.elements))
# limiter ------------------------------------------------------------
from grudge.models.gas_dynamics import SlopeLimiter1NEuler
limiter = SlopeLimiter1NEuler(discr, vortex.gamma, 2, op)
from grudge.timestep import SSPRK3TimeStepper
#stepper = SSPRK3TimeStepper(limiter=limiter)
stepper = SSPRK3TimeStepper()
#from grudge.timestep import RK4TimeStepper
#stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
log_file_name = "euler-%d.dat" % order
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -------------------------------------------------------
try:
final_time = 0.2
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=final_time,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
#if False:
visf = vis.make_file("vortex-%d-%04d" % (order, step))
#true_fields = vortex.volume_interpolant(t, discr)
from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", discr.convert_volume(op.rho(true_fields), kind="numpy")),
#("true_e", discr.convert_volume(op.e(true_fields), kind="numpy")),
#("true_rho_u", discr.convert_volume(op.rho_u(true_fields), kind="numpy")),
#("true_u", discr.convert_volume(op.u(true_fields), kind="numpy")),
#("rhs_rho", discr.convert_volume(op.rho(rhs_fields), kind="numpy")),
#("rhs_e", discr.convert_volume(op.e(rhs_fields), kind="numpy")),
#("rhs_rho_u", discr.convert_volume(op.rho_u(rhs_fields), kind="numpy")),
],
#expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
#("p", "0.4*(e- 0.5*(rho_u*u))"),
#],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
#fields = limiter(fields)
#regrid to discr2 at some arbitrary time
if step == 21:
#get interpolated fields
fields = discr.get_regrid_values(fields,
discr2,
dtype=None,
use_btree=True,
thresh=1e-8)
#get new stepper (old one has reference to discr
stepper = SSPRK3TimeStepper()
#new bind
euler_ex = op.bind(discr2)
#new rhs
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = euler_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(t + dt, fields)
#add logmanager
#discr2.add_instrumentation(logmgr)
#new step_it
step_it = times_and_steps(
final_time=final_time,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr2,
stepper=stepper,
t=t,
max_eigenvalue=max_eigval[0]))
#new visualization
vis.close()
vis = VtkVisualizer(discr2, rcon,
"vortexNewGrid-%d" % order)
discr = discr2
assert not numpy.isnan(numpy.sum(fields[0]))
true_fields = vortex.volume_interpolant(final_time, discr)
l2_error = discr.norm(fields - true_fields)
l2_error_rho = discr.norm(op.rho(fields) - op.rho(true_fields))
l2_error_e = discr.norm(op.e(fields) - op.e(true_fields))
l2_error_rhou = discr.norm(
op.rho_u(fields) - op.rho_u(true_fields))
l2_error_u = discr.norm(op.u(fields) - op.u(true_fields))
eoc_rec.add_data_point(order, l2_error)
print()
print(eoc_rec.pretty_print("P.Deg.", "L2 Error"))
logmgr.set_constant("l2_error", l2_error)
logmgr.set_constant("l2_error_rho", l2_error_rho)
logmgr.set_constant("l2_error_e", l2_error_e)
logmgr.set_constant("l2_error_rhou", l2_error_rhou)
logmgr.set_constant("l2_error_u", l2_error_u)
logmgr.set_constant("refinement", refine)
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main():
from grudge.backends import guess_run_context
rcon = guess_run_context()
if rcon.is_head_rank:
mesh = make_nacamesh()
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
from pytools import add_python_path_relative_to_script
add_python_path_relative_to_script("..")
for order in [4]:
from gas_dynamics_initials import UniformMachFlow
uniform_flow = UniformMachFlow()
from grudge.models.gas_dynamics import GasDynamicsOperator, GammaLawEOS
op = GasDynamicsOperator(dimensions=2,
equation_of_state=GammaLawEOS(
uniform_flow.gamma),
prandtl=uniform_flow.prandtl,
spec_gas_const=uniform_flow.spec_gas_const,
mu=uniform_flow.mu,
bc_inflow=uniform_flow,
bc_outflow=uniform_flow,
bc_noslip=uniform_flow,
inflow_tag="inflow",
outflow_tag="outflow",
noslip_tag="noslip")
discr = rcon.make_discretization(
mesh_data,
order=order,
debug=[
"cuda_no_plan",
#"cuda_dump_kernels",
#"dump_optemplate_stages",
#"dump_dataflow_graph",
#"print_op_code"
],
default_scalar_type=numpy.float32,
tune_for=op.sym_operator())
from grudge.visualization import SiloVisualizer, VtkVisualizer
#vis = VtkVisualizer(discr, rcon, "shearflow-%d" % order)
vis = SiloVisualizer(discr, rcon)
fields = uniform_flow.volume_interpolant(0, discr)
navierstokes_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = navierstokes_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
from grudge.timestep.runge_kutta import \
ODE23TimeStepper, LSRK4TimeStepper
stepper = ODE23TimeStepper(
dtype=discr.default_scalar_type,
rtol=1e-6,
vector_primitive_factory=discr.get_vector_primitive_factory())
#stepper = LSRK4TimeStepper(dtype=discr.default_scalar_type)
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
logmgr = LogManager("cns-naca-%d.dat" % order, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
from logpyle import LogQuantity
class ChangeSinceLastStep(LogQuantity):
"""Records the change of a variable between a time step and the previous
one"""
def __init__(self, name="change"):
LogQuantity.__init__(self, name, "1",
"Change since last time step")
self.old_fields = 0
def __call__(self):
result = discr.norm(fields - self.old_fields)
self.old_fields = fields
return result
#logmgr.add_quantity(ChangeSinceLastStep())
# filter setup-------------------------------------------------------------
from grudge.discretization import Filter, ExponentialFilterResponseFunction
mode_filter = Filter(
discr,
ExponentialFilterResponseFunction(min_amplification=0.9, order=4))
# timestep loop -------------------------------------------------------
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=200,
#max_steps=500,
logmgr=logmgr,
max_dt_getter=lambda t: next_dt,
taken_dt_getter=lambda: taken_dt)
model_stepper = LSRK4TimeStepper()
next_dt = op.estimate_timestep(discr,
stepper=model_stepper,
t=0,
max_eigenvalue=max_eigval[0])
for step, t, dt in step_it:
if step % 10 == 0:
visf = vis.make_file("naca-%d-%06d" % (order, step))
from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", op.rho(true_fields)),
#("true_e", op.e(true_fields)),
#("true_rho_u", op.rho_u(true_fields)),
#("true_u", op.u(true_fields)),
#("rhs_rho", discr.convert_volume(op.rho(rhs_fields), kind="numpy")),
#("rhs_e", discr.convert_volume(op.e(rhs_fields), kind="numpy")),
#("rhs_rho_u", discr.convert_volume(op.rho_u(rhs_fields), kind="numpy")),
],
expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
("p", "(0.4)*(e- 0.5*(rho_u*u))"),
],
time=t,
step=step)
visf.close()
fields, t, taken_dt, next_dt = stepper(fields, t, dt, rhs)
fields = mode_filter(fields)
finally:
vis.close()
logmgr.save()
discr.close()
def main(final_time=1, write_output=False):
from grudge.backends import guess_run_context
rcon = guess_run_context()
from grudge.tools import EOCRecorder, to_obj_array
eoc_rec = EOCRecorder()
if rcon.is_head_rank:
from grudge.mesh import make_box_mesh
mesh = make_box_mesh((0,0,0), (10,10,10), max_volume=0.5)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [3, 4, 5]:
discr = rcon.make_discretization(mesh_data, order=order,
default_scalar_type=numpy.float64)
from grudge.visualization import SiloVisualizer, VtkVisualizer
vis = VtkVisualizer(discr, rcon, "sinewave-%d" % order)
#vis = SiloVisualizer(discr, rcon)
sinewave = SineWave()
fields = sinewave.volume_interpolant(0, discr)
gamma, mu, prandtl, spec_gas_const = sinewave.properties()
from grudge.mesh import BTAG_ALL
from grudge.models.gas_dynamics import GasDynamicsOperator
op = GasDynamicsOperator(dimensions=mesh.dimensions, gamma=gamma, mu=mu,
prandtl=prandtl, spec_gas_const=spec_gas_const,
bc_inflow=sinewave, bc_outflow=sinewave, bc_noslip=sinewave,
inflow_tag=BTAG_ALL, source=None)
euler_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = euler_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
from grudge.timestep import RK4TimeStepper
stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
log_name = ("euler-sinewave-%(order)d-%(els)d.dat"
% {"order":order, "els":len(mesh.elements)})
else:
log_name = False
logmgr = LogManager(log_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -------------------------------------------------------
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=final_time, logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(discr,
stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
#if step % 10 == 0:
if write_output:
visf = vis.make_file("sinewave-%d-%04d" % (order, step))
#from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(visf,
[
("rho", discr.convert_volume(op.rho(fields), kind="numpy")),
("e", discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u", discr.convert_volume(op.rho_u(fields), kind="numpy")),
("u", discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", op.rho(true_fields)),
#("true_e", op.e(true_fields)),
#("true_rho_u", op.rho_u(true_fields)),
#("true_u", op.u(true_fields)),
#("rhs_rho", op.rho(rhs_fields)),
#("rhs_e", op.e(rhs_fields)),
#("rhs_rho_u", op.rho_u(rhs_fields)),
],
#expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
#("p", "0.4*(e- 0.5*(rho_u*u))"),
#],
time=t, step=step
)
visf.close()
fields = stepper(fields, t, dt, rhs)
finally:
vis.close()
logmgr.close()
discr.close()
true_fields = sinewave.volume_interpolant(t, discr)
eoc_rec.add_data_point(order, discr.norm(fields-true_fields))
print()
print(eoc_rec.pretty_print("P.Deg.", "L2 Error"))
def main(write_output=True,
flux_type_arg="upwind",
dtype=np.float64,
debug=[]):
from math import sin, cos, pi, exp, sqrt # noqa
from grudge.backends import guess_run_context
rcon = guess_run_context()
if rcon.is_head_rank:
from grudge.mesh.reader.gmsh import generate_gmsh
mesh = generate_gmsh(GEOMETRY,
2,
allow_internal_boundaries=True,
force_dimension=2)
print("%d elements" % len(mesh.elements))
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
discr = rcon.make_discretization(mesh_data,
order=4,
debug=debug,
default_scalar_type=dtype)
from grudge.timestep.runge_kutta import LSRK4TimeStepper
stepper = LSRK4TimeStepper(dtype=dtype)
from grudge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(discr, rcon, "fld")
source_center = 0
source_width = 0.05
source_omega = 3
import grudge.symbolic as sym
sym_x = sym.nodes(2)
sym_source_center_dist = sym_x - source_center
from grudge.models.wave import StrongWaveOperator
op = StrongWaveOperator(
-1,
discr.dimensions,
source_f=sym.FunctionSymbol("sin")(
source_omega * sym.ScalarParameter("t")) *
sym.FunctionSymbol("exp")(
-np.dot(sym_source_center_dist, sym_source_center_dist) /
source_width**2),
dirichlet_tag="boundary",
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_NONE,
flux_type=flux_type_arg)
from grudge.tools import join_fields
fields = join_fields(
discr.volume_zeros(dtype=dtype),
[discr.volume_zeros(dtype=dtype) for i in range(discr.dimensions)])
# diagnostics setup -------------------------------------------------------
from logpyle import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "wiggly.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -----------------------------------------------------------
rhs = op.bind(discr)
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=4,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
visf = vis.make_file("fld-%04d" % step)
vis.add_data(visf, [
("u", fields[0]),
("v", fields[1:]),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
assert discr.norm(fields) < 1
assert fields[0].dtype == dtype
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main():
from grudge.backends import guess_run_context
rcon = guess_run_context()
from grudge.tools import to_obj_array
if rcon.is_head_rank:
from grudge.mesh.generator import make_rect_mesh
mesh = make_rect_mesh((-5, -5), (5, 5), max_area=0.01)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [1]:
discr = rcon.make_discretization(mesh_data,
order=order,
default_scalar_type=numpy.float64)
from grudge.visualization import SiloVisualizer, VtkVisualizer
vis = VtkVisualizer(discr, rcon, "Sod2D-%d" % order)
#vis = SiloVisualizer(discr, rcon)
sod_field = Sod(gamma=1.4)
fields = sod_field.volume_interpolant(0, discr)
from grudge.models.gas_dynamics import GasDynamicsOperator
from grudge.mesh import BTAG_ALL
op = GasDynamicsOperator(dimensions=2,
gamma=sod_field.gamma,
mu=0.0,
prandtl=sod_field.prandtl,
bc_inflow=sod_field,
bc_outflow=sod_field,
bc_noslip=sod_field,
inflow_tag=BTAG_ALL,
source=None)
euler_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = euler_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
# limiter setup ------------------------------------------------------------
from grudge.models.gas_dynamics import SlopeLimiter1NEuler
limiter = SlopeLimiter1NEuler(discr, sod_field.gamma, 2, op)
# integrator setup---------------------------------------------------------
from grudge.timestep import SSPRK3TimeStepper, RK4TimeStepper
stepper = SSPRK3TimeStepper(limiter=limiter)
#stepper = SSPRK3TimeStepper()
#stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
logmgr = LogManager("euler-%d.dat" % order, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# filter setup-------------------------------------------------------------
from grudge.discretization import Filter, ExponentialFilterResponseFunction
mode_filter = Filter(
discr,
ExponentialFilterResponseFunction(min_amplification=0.9, order=4))
# timestep loop -------------------------------------------------------
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=1.0,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
if step % 5 == 0:
#if False:
visf = vis.make_file("vortex-%d-%04d" % (order, step))
#true_fields = vortex.volume_interpolant(t, discr)
#from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", op.rho(true_fields)),
#("true_e", op.e(true_fields)),
#("true_rho_u", op.rho_u(true_fields)),
#("true_u", op.u(true_fields)),
#("rhs_rho", op.rho(rhs_fields)),
#("rhs_e", op.e(rhs_fields)),
#("rhs_rho_u", op.rho_u(rhs_fields)),
],
#expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
#("p", "0.4*(e- 0.5*(rho_u*u))"),
#],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
# fields = limiter(fields)
# fields = mode_filter(fields)
assert not numpy.isnan(numpy.sum(fields[0]))
finally:
vis.close()
logmgr.close()
discr.close()
# not solution, just to check against when making code changes
true_fields = sod_field.volume_interpolant(t, discr)
print(discr.norm(fields - true_fields))
u = discr.interpolate_volume_function(lambda x, el: case.u0(x[0]))
# diagnostics setup -------------------------------------------------------
from logpyle import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "burgers.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
from grudge.log import LpNorm
u_getter = lambda: u
logmgr.add_quantity(LpNorm(u_getter, discr, p=1, name="l1_u"))
logmgr.add_watches(["step.max", "t_sim.max", "l1_u", "t_step.max"])
# timestep loop -----------------------------------------------------------
rhs = op.bind(discr)
from grudge.timestep.runge_kutta import ODE45TimeStepper, LSRK4TimeStepper
stepper = ODE45TimeStepper()
def main(write_output=True):
from math import sqrt, pi, exp
from os.path import join
from grudge.backends import guess_run_context
rcon = guess_run_context()
epsilon0 = 8.8541878176e-12 # C**2 / (N m**2)
mu0 = 4 * pi * 1e-7 # N/A**2.
epsilon = 1 * epsilon0
mu = 1 * mu0
output_dir = "maxwell-2d"
import os
if not os.access(output_dir, os.F_OK):
os.makedirs(output_dir)
from grudge.mesh.generator import make_disk_mesh
mesh = make_disk_mesh(r=0.5, max_area=1e-3)
if rcon.is_head_rank:
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
class CurrentSource:
shape = (3, )
def __call__(self, x, el):
return [0, 0, exp(-80 * la.norm(x))]
order = 3
final_time = 1e-8
discr = rcon.make_discretization(mesh_data,
order=order,
debug=["cuda_no_plan"])
from grudge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(discr, rcon, join(output_dir, "em-%d" % order))
if rcon.is_head_rank:
print("order %d" % order)
print("#elements=", len(mesh.elements))
from grudge.mesh import BTAG_ALL, BTAG_NONE
from grudge.models.em import TMMaxwellOperator
from grudge.data import make_tdep_given, TimeIntervalGivenFunction
op = TMMaxwellOperator(epsilon,
mu,
flux_type=1,
current=TimeIntervalGivenFunction(
make_tdep_given(CurrentSource()),
off_time=final_time / 10),
absorb_tag=BTAG_ALL,
pec_tag=BTAG_NONE)
fields = op.assemble_eh(discr=discr)
from grudge.timestep import LSRK4TimeStepper
stepper = LSRK4TimeStepper()
from time import time
last_tstep = time()
t = 0
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
log_file_name = join(output_dir, "maxwell-%d.dat" % order)
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
from logpyle import IntervalTimer
vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
logmgr.add_quantity(vis_timer)
from grudge.log import EMFieldGetter, add_em_quantities
field_getter = EMFieldGetter(discr, op, lambda: fields)
add_em_quantities(logmgr, op, field_getter)
logmgr.add_watches(
["step.max", "t_sim.max", ("W_field", "W_el+W_mag"), "t_step.max"])
# timestep loop -------------------------------------------------------
rhs = op.bind(discr)
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=final_time,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
e, h = op.split_eh(fields)
visf = vis.make_file(
join(output_dir, "em-%d-%04d" % (order, step)))
vis.add_data(visf, [
("e", discr.convert_volume(e, "numpy")),
("h", discr.convert_volume(h, "numpy")),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
assert discr.norm(fields) < 0.03
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main():
import logging
logging.basicConfig(level=logging.INFO)
from grudge.backends import guess_run_context
rcon = guess_run_context()
if rcon.is_head_rank:
if True:
mesh = make_squaremesh()
else:
from grudge.mesh import make_rect_mesh
mesh = make_rect_mesh(
boundary_tagger=lambda fvi, el, fn, all_v: ["inflow"],
max_area=0.1)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
from pytools import add_python_path_relative_to_script
add_python_path_relative_to_script(".")
for order in [3]:
from gas_dynamics_initials import UniformMachFlow
square = UniformMachFlow(gaussian_pulse_at=numpy.array([-2, 2]),
pulse_magnitude=0.003)
from grudge.models.gas_dynamics import (GasDynamicsOperator,
GammaLawEOS)
op = GasDynamicsOperator(dimensions=2,
equation_of_state=GammaLawEOS(square.gamma),
mu=square.mu,
prandtl=square.prandtl,
spec_gas_const=square.spec_gas_const,
bc_inflow=square,
bc_outflow=square,
bc_noslip=square,
inflow_tag="inflow",
outflow_tag="outflow",
noslip_tag="noslip")
discr = rcon.make_discretization(
mesh_data,
order=order,
debug=[
"cuda_no_plan",
"cuda_dump_kernels",
#"dump_dataflow_graph",
#"dump_optemplate_stages",
#"dump_dataflow_graph",
#"dump_op_code"
#"cuda_no_plan_el_local"
],
default_scalar_type=numpy.float64,
tune_for=op.sym_operator(),
quad_min_degrees={
"gasdyn_vol": 3 * order,
"gasdyn_face": 3 * order,
})
from grudge.visualization import SiloVisualizer, VtkVisualizer
#vis = VtkVisualizer(discr, rcon, "shearflow-%d" % order)
vis = SiloVisualizer(discr, rcon)
from grudge.timestep.runge_kutta import (LSRK4TimeStepper,
ODE23TimeStepper,
ODE45TimeStepper)
from grudge.timestep.dumka3 import Dumka3TimeStepper
#stepper = LSRK4TimeStepper(dtype=discr.default_scalar_type,
#vector_primitive_factory=discr.get_vector_primitive_factory())
stepper = ODE23TimeStepper(
dtype=discr.default_scalar_type,
rtol=1e-6,
vector_primitive_factory=discr.get_vector_primitive_factory())
# Dumka works kind of poorly
#stepper = Dumka3TimeStepper(dtype=discr.default_scalar_type,
#rtol=1e-7, pol_index=2,
#vector_primitive_factory=discr.get_vector_primitive_factory())
#from grudge.timestep.dumka3 import Dumka3TimeStepper
#stepper = Dumka3TimeStepper(3, rtol=1e-7)
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
logmgr = LogManager("cns-square-sp-%d.dat" % order, "w",
rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
from logpyle import LogQuantity
class ChangeSinceLastStep(LogQuantity):
"""Records the change of a variable between a time step and the previous
one"""
def __init__(self, name="change"):
LogQuantity.__init__(self, name, "1",
"Change since last time step")
self.old_fields = 0
def __call__(self):
result = discr.norm(fields - self.old_fields)
self.old_fields = fields
return result
#logmgr.add_quantity(ChangeSinceLastStep())
add_simulation_quantities(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# filter setup ------------------------------------------------------------
from grudge.discretization import Filter, ExponentialFilterResponseFunction
mode_filter = Filter(
discr,
ExponentialFilterResponseFunction(min_amplification=0.95, order=6))
# timestep loop -------------------------------------------------------
fields = square.volume_interpolant(0, discr)
navierstokes_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = navierstokes_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=1000,
#max_steps=500,
logmgr=logmgr,
max_dt_getter=lambda t: next_dt,
taken_dt_getter=lambda: taken_dt)
model_stepper = LSRK4TimeStepper()
next_dt = op.estimate_timestep(discr,
stepper=model_stepper,
t=0,
max_eigenvalue=max_eigval[0])
for step, t, dt in step_it:
#if (step % 10000 == 0): #and step < 950000) or (step % 500 == 0 and step > 950000):
#if False:
if step % 5 == 0:
visf = vis.make_file("square-%d-%06d" % (order, step))
#from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(visf, [
("rho",
discr.convert_volume(op.rho(fields), kind="numpy")),
("e", discr.convert_volume(op.e(fields),
kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields), kind="numpy")),
("u", discr.convert_volume(op.u(fields),
kind="numpy")),
],
expressions=[
("p", "(0.4)*(e- 0.5*(rho_u*u))"),
],
time=t,
step=step)
visf.close()
if stepper.adaptive:
fields, t, taken_dt, next_dt = stepper(fields, t, dt, rhs)
else:
taken_dt = dt
fields = stepper(fields, t, dt, rhs)
dt = op.estimate_timestep(discr,
stepper=model_stepper,
t=0,
max_eigenvalue=max_eigval[0])
#fields = mode_filter(fields)
finally:
vis.close()
logmgr.save()
discr.close()
def main(write_output=True):
from grudge.timestep.runge_kutta import LSRK4TimeStepper
from math import sqrt, pi, exp
from grudge.backends import guess_run_context
rcon = guess_run_context()
epsilon0 = 8.8541878176e-12 # C**2 / (N m**2)
mu0 = 4 * pi * 1e-7 # N/A**2.
epsilon = 1 * epsilon0
mu = 1 * mu0
c = 1 / sqrt(mu * epsilon)
pml_width = 0.5
#mesh = make_mesh(a=np.array((-1,-1,-1)), b=np.array((1,1,1)),
#mesh = make_mesh(a=np.array((-3,-3)), b=np.array((3,3)),
mesh = make_mesh(
a=np.array((-1, -1)),
b=np.array((1, 1)),
#mesh = make_mesh(a=np.array((-2,-2)), b=np.array((2,2)),
pml_width=pml_width,
max_volume=0.01)
if rcon.is_head_rank:
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
class Current:
def volume_interpolant(self, t, discr):
from grudge.tools import make_obj_array
result = discr.volume_zeros(kind="numpy", dtype=np.float64)
omega = 6 * c
if omega * t > 2 * pi:
return make_obj_array([result, result, result])
x = make_obj_array(discr.nodes.T)
r = np.sqrt(np.dot(x, x))
idx = r < 0.3
result[idx] = (1+np.cos(pi*r/0.3))[idx] \
*np.sin(omega*t)**3
result = discr.convert_volume(result,
kind=discr.compute_kind,
dtype=discr.default_scalar_type)
return make_obj_array([-result, result, result])
order = 3
discr = rcon.make_discretization(mesh_data,
order=order,
debug=["cuda_no_plan"])
from grudge.visualization import VtkVisualizer
if write_output:
vis = VtkVisualizer(discr, rcon, "em-%d" % order)
from grudge.mesh import BTAG_ALL, BTAG_NONE
from grudge.data import GivenFunction, TimeHarmonicGivenFunction, TimeIntervalGivenFunction
from grudge.models.em import MaxwellOperator
from grudge.models.pml import \
AbarbanelGottliebPMLMaxwellOperator, \
AbarbanelGottliebPMLTMMaxwellOperator, \
AbarbanelGottliebPMLTEMaxwellOperator
op = AbarbanelGottliebPMLTEMaxwellOperator(epsilon,
mu,
flux_type=1,
current=Current(),
pec_tag=BTAG_ALL,
absorb_tag=BTAG_NONE,
add_decay=True)
fields = op.assemble_ehpq(discr=discr)
stepper = LSRK4TimeStepper()
if rcon.is_head_rank:
print("order %d" % order)
print("#elements=", len(mesh.elements))
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
log_file_name = "maxwell-%d.dat" % order
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
from logpyle import IntervalTimer
vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
logmgr.add_quantity(vis_timer)
from grudge.log import EMFieldGetter, add_em_quantities
field_getter = EMFieldGetter(discr, op, lambda: fields)
add_em_quantities(logmgr, op, field_getter)
logmgr.add_watches(
["step.max", "t_sim.max", ("W_field", "W_el+W_mag"), "t_step.max"])
from grudge.log import LpNorm
class FieldIdxGetter:
def __init__(self, whole_getter, idx):
self.whole_getter = whole_getter
self.idx = idx
def __call__(self):
return self.whole_getter()[self.idx]
# timestep loop -------------------------------------------------------
t = 0
pml_coeff = op.coefficients_from_width(discr, width=pml_width)
rhs = op.bind(discr, pml_coeff)
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=4 / c,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, fields=fields))
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
e, h, p, q = op.split_ehpq(fields)
visf = vis.make_file("em-%d-%04d" % (order, step))
#pml_rhs_e, pml_rhs_h, pml_rhs_p, pml_rhs_q = \
#op.split_ehpq(rhs(t, fields))
j = Current().volume_interpolant(t, discr)
vis.add_data(
visf,
[
("e", discr.convert_volume(e, "numpy")),
("h", discr.convert_volume(h, "numpy")),
("p", discr.convert_volume(p, "numpy")),
("q", discr.convert_volume(q, "numpy")),
("j", discr.convert_volume(j, "numpy")),
#("pml_rhs_e", pml_rhs_e),
#("pml_rhs_h", pml_rhs_h),
#("pml_rhs_p", pml_rhs_p),
#("pml_rhs_q", pml_rhs_q),
#("max_rhs_e", max_rhs_e),
#("max_rhs_h", max_rhs_h),
#("max_rhs_p", max_rhs_p),
#("max_rhs_q", max_rhs_q),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
_, _, energies_data = logmgr.get_expr_dataset("W_el+W_mag")
energies = [value for tick_nbr, value in energies_data]
assert energies[-1] < max(energies) * 1e-2
finally:
logmgr.close()
if write_output:
vis.close()
def main(write_output=True):
from pytools import add_python_path_relative_to_script
add_python_path_relative_to_script("..")
from grudge.backends import guess_run_context
rcon = guess_run_context()
from grudge.tools import EOCRecorder
eoc_rec = EOCRecorder()
if rcon.is_head_rank:
from grudge.mesh.generator import \
make_rect_mesh, \
make_centered_regular_rect_mesh
refine = 4
mesh = make_centered_regular_rect_mesh((0, -5), (10, 5),
n=(9, 9),
post_refine_factor=refine)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [3, 4, 5]:
from gas_dynamics_initials import Vortex
flow = Vortex()
from grudge.models.gas_dynamics import (GasDynamicsOperator,
PolytropeEOS, GammaLawEOS)
from grudge.mesh import BTAG_ALL
# works equally well for GammaLawEOS
op = GasDynamicsOperator(dimensions=2,
mu=flow.mu,
prandtl=flow.prandtl,
spec_gas_const=flow.spec_gas_const,
equation_of_state=PolytropeEOS(flow.gamma),
bc_inflow=flow,
bc_outflow=flow,
bc_noslip=flow,
inflow_tag=BTAG_ALL,
source=None)
discr = rcon.make_discretization(mesh_data,
order=order,
default_scalar_type=numpy.float64,
quad_min_degrees={
"gasdyn_vol": 3 * order,
"gasdyn_face": 3 * order,
},
tune_for=op.sym_operator(),
debug=["cuda_no_plan"])
from grudge.visualization import SiloVisualizer, VtkVisualizer
vis = VtkVisualizer(discr, rcon, "vortex-%d" % order)
#vis = SiloVisualizer(discr, rcon)
fields = flow.volume_interpolant(0, discr)
euler_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = euler_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
# limiter ------------------------------------------------------------
from grudge.models.gas_dynamics import SlopeLimiter1NEuler
limiter = SlopeLimiter1NEuler(discr, flow.gamma, 2, op)
from grudge.timestep.runge_kutta import SSP3TimeStepper
#stepper = SSP3TimeStepper(limiter=limiter)
stepper = SSP3TimeStepper(
vector_primitive_factory=discr.get_vector_primitive_factory())
#from grudge.timestep import RK4TimeStepper
#stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
if write_output:
log_file_name = "euler-%d.dat" % order
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -------------------------------------------------------
try:
final_time = flow.final_time
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=final_time,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
print("run until t=%g" % final_time)
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
#if False:
visf = vis.make_file("vortex-%d-%04d" % (order, step))
#true_fields = vortex.volume_interpolant(t, discr)
from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", discr.convert_volume(op.rho(true_fields), kind="numpy")),
#("true_e", discr.convert_volume(op.e(true_fields), kind="numpy")),
#("true_rho_u", discr.convert_volume(op.rho_u(true_fields), kind="numpy")),
#("true_u", discr.convert_volume(op.u(true_fields), kind="numpy")),
#("rhs_rho", discr.convert_volume(op.rho(rhs_fields), kind="numpy")),
#("rhs_e", discr.convert_volume(op.e(rhs_fields), kind="numpy")),
#("rhs_rho_u", discr.convert_volume(op.rho_u(rhs_fields), kind="numpy")),
],
#expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
#("p", "0.4*(e- 0.5*(rho_u*u))"),
#],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
#fields = limiter(fields)
assert not numpy.isnan(numpy.sum(fields[0]))
true_fields = flow.volume_interpolant(final_time, discr)
l2_error = discr.norm(fields - true_fields)
l2_error_rho = discr.norm(op.rho(fields) - op.rho(true_fields))
l2_error_e = discr.norm(op.e(fields) - op.e(true_fields))
l2_error_rhou = discr.norm(
op.rho_u(fields) - op.rho_u(true_fields))
l2_error_u = discr.norm(op.u(fields) - op.u(true_fields))
eoc_rec.add_data_point(order, l2_error)
print()
print(eoc_rec.pretty_print("P.Deg.", "L2 Error"))
logmgr.set_constant("l2_error", l2_error)
logmgr.set_constant("l2_error_rho", l2_error_rho)
logmgr.set_constant("l2_error_e", l2_error_e)
logmgr.set_constant("l2_error_rhou", l2_error_rhou)
logmgr.set_constant("l2_error_u", l2_error_u)
logmgr.set_constant("refinement", refine)
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
# after order loop
assert eoc_rec.estimate_order_of_convergence()[0, 1] > 6
def main():
from grudge.backends import guess_run_context
rcon = guess_run_context(
#["cuda"]
)
from grudge.tools import EOCRecorder, to_obj_array
eoc_rec = EOCRecorder()
def boundary_tagger(vertices, el, face_nr, all_v):
return ["inflow"]
if rcon.is_head_rank:
from grudge.mesh import make_rect_mesh, \
make_centered_regular_rect_mesh
#mesh = make_rect_mesh((0,0), (10,1), max_area=0.01)
refine = 1
mesh = make_centered_regular_rect_mesh(
(0, 0),
(10, 1),
n=(20, 4),
#periodicity=(True, False),
post_refine_factor=refine,
boundary_tagger=boundary_tagger)
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [3]:
discr = rcon.make_discretization(mesh_data,
order=order,
default_scalar_type=numpy.float64)
from grudge.visualization import SiloVisualizer, VtkVisualizer
#vis = VtkVisualizer(discr, rcon, "shearflow-%d" % order)
vis = SiloVisualizer(discr, rcon)
shearflow = SteadyShearFlow()
fields = shearflow.volume_interpolant(0, discr)
gamma, mu, prandtl, spec_gas_const = shearflow.properties()
from grudge.models.gas_dynamics import GasDynamicsOperator
op = GasDynamicsOperator(dimensions=2,
gamma=gamma,
mu=mu,
prandtl=prandtl,
spec_gas_const=spec_gas_const,
bc_inflow=shearflow,
bc_outflow=shearflow,
bc_noslip=shearflow,
inflow_tag="inflow",
outflow_tag="outflow",
noslip_tag="noslip")
navierstokes_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = navierstokes_ex(t, q)
max_eigval[0] = speed
return ode_rhs
# needed to get first estimate of maximum eigenvalue
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
from grudge.timestep import RK4TimeStepper
stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
logmgr = LogManager("navierstokes-cpu-%d-%d.dat" % (order, refine),
"w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
# timestep loop -------------------------------------------------------
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=0.3,
#max_steps=500,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(
discr, stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
if step % 10 == 0:
#if False:
visf = vis.make_file("shearflow-%d-%04d" % (order, step))
#true_fields = shearflow.volume_interpolant(t, discr)
from pyvisfile.silo import DB_VARTYPE_VECTOR
vis.add_data(
visf,
[
("rho",
discr.convert_volume(op.rho(fields),
kind="numpy")),
("e",
discr.convert_volume(op.e(fields), kind="numpy")),
("rho_u",
discr.convert_volume(op.rho_u(fields),
kind="numpy")),
("u",
discr.convert_volume(op.u(fields), kind="numpy")),
#("true_rho", discr.convert_volume(op.rho(true_fields), kind="numpy")),
#("true_e", discr.convert_volume(op.e(true_fields), kind="numpy")),
#("true_rho_u", discr.convert_volume(op.rho_u(true_fields), kind="numpy")),
#("true_u", discr.convert_volume(op.u(true_fields), kind="numpy")),
],
expressions=[
#("diff_rho", "rho-true_rho"),
#("diff_e", "e-true_e"),
#("diff_rho_u", "rho_u-true_rho_u", DB_VARTYPE_VECTOR),
("p", "0.4*(e- 0.5*(rho_u*u))"),
],
time=t,
step=step)
visf.close()
fields = stepper(fields, t, dt, rhs)
true_fields = shearflow.volume_interpolant(t, discr)
l2_error = discr.norm(op.u(fields) - op.u(true_fields))
eoc_rec.add_data_point(order, l2_error)
print()
print(eoc_rec.pretty_print("P.Deg.", "L2 Error"))
logmgr.set_constant("l2_error", l2_error)
finally:
vis.close()
logmgr.save()
discr.close()
def main(write_output=True) :
from math import sin, cos, pi, exp, sqrt
from grudge.data import TimeConstantGivenFunction, \
ConstantGivenFunction
from grudge.backends import guess_run_context
rcon = guess_run_context()
dim = 2
def boundary_tagger(fvi, el, fn, all_v):
if el.face_normals[fn][0] > 0:
return ["dirichlet"]
else:
return ["neumann"]
if dim == 2:
if rcon.is_head_rank:
from grudge.mesh.generator import make_disk_mesh
mesh = make_disk_mesh(r=0.5, boundary_tagger=boundary_tagger)
elif dim == 3:
if rcon.is_head_rank:
from grudge.mesh.generator import make_ball_mesh
mesh = make_ball_mesh(max_volume=0.001)
else:
raise RuntimeError("bad number of dimensions")
if rcon.is_head_rank:
print("%d elements" % len(mesh.elements))
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
discr = rcon.make_discretization(mesh_data, order=3,
debug=["cuda_no_plan"],
default_scalar_type=numpy.float64)
if write_output:
from grudge.visualization import VtkVisualizer
vis = VtkVisualizer(discr, rcon, "fld")
def u0(x, el):
if la.norm(x) < 0.2:
return 1
else:
return 0
def coeff(x, el):
if x[0] < 0:
return 0.25
else:
return 1
def dirichlet_bc(t, x):
return 0
def neumann_bc(t, x):
return 2
from grudge.models.diffusion import DiffusionOperator
op = DiffusionOperator(discr.dimensions,
#coeff=coeff,
dirichlet_tag="dirichlet",
dirichlet_bc=TimeConstantGivenFunction(ConstantGivenFunction(0)),
neumann_tag="neumann",
neumann_bc=TimeConstantGivenFunction(ConstantGivenFunction(1))
)
u = discr.interpolate_volume_function(u0)
# diagnostics setup -------------------------------------------------------
from logpyle import LogManager, \
add_general_quantities, \
add_simulation_quantities, \
add_run_info
if write_output:
log_file_name = "heat.dat"
else:
log_file_name = None
logmgr = LogManager(log_file_name, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
from grudge.log import LpNorm
u_getter = lambda: u
logmgr.add_quantity(LpNorm(u_getter, discr, 1, name="l1_u"))
logmgr.add_quantity(LpNorm(u_getter, discr, name="l2_u"))
logmgr.add_watches(["step.max", "t_sim.max", "l2_u", "t_step.max"])
# timestep loop -----------------------------------------------------------
from grudge.timestep.runge_kutta import LSRK4TimeStepper, ODE45TimeStepper
from grudge.timestep.dumka3 import Dumka3TimeStepper
#stepper = LSRK4TimeStepper()
stepper = Dumka3TimeStepper(3, rtol=1e-6, rcon=rcon,
vector_primitive_factory=discr.get_vector_primitive_factory(),
dtype=discr.default_scalar_type)
#stepper = ODE45TimeStepper(rtol=1e-6, rcon=rcon,
#vector_primitive_factory=discr.get_vector_primitive_factory(),
#dtype=discr.default_scalar_type)
stepper.add_instrumentation(logmgr)
rhs = op.bind(discr)
try:
next_dt = op.estimate_timestep(discr,
stepper=LSRK4TimeStepper(), t=0, fields=u)
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=0.1, logmgr=logmgr,
max_dt_getter=lambda t: next_dt,
taken_dt_getter=lambda: taken_dt)
for step, t, dt in step_it:
if step % 10 == 0 and write_output:
visf = vis.make_file("fld-%04d" % step)
vis.add_data(visf, [
("u", discr.convert_volume(u, kind="numpy")),
], time=t, step=step)
visf.close()
u, t, taken_dt, next_dt = stepper(u, t, next_dt, rhs)
#u = stepper(u, t, dt, rhs)
assert discr.norm(u) < 1
finally:
if write_output:
vis.close()
logmgr.close()
discr.close()
def main():
from grudge.backends import guess_run_context
rcon = guess_run_context(["cuda"])
if rcon.is_head_rank:
mesh = make_boxmesh()
#from grudge.mesh import make_rect_mesh
#mesh = make_rect_mesh(
# boundary_tagger=lambda fvi, el, fn, all_v: ["inflow"])
mesh_data = rcon.distribute_mesh(mesh)
else:
mesh_data = rcon.receive_mesh()
for order in [3]:
from pytools import add_python_path_relative_to_script
add_python_path_relative_to_script("..")
from gas_dynamics_initials import UniformMachFlow
box = UniformMachFlow(angle_of_attack=0)
from grudge.models.gas_dynamics import GasDynamicsOperator
op = GasDynamicsOperator(dimensions=3,
gamma=box.gamma, mu=box.mu,
prandtl=box.prandtl, spec_gas_const=box.spec_gas_const,
bc_inflow=box, bc_outflow=box, bc_noslip=box,
inflow_tag="inflow", outflow_tag="outflow", noslip_tag="noslip")
discr = rcon.make_discretization(mesh_data, order=order,
debug=[
#"cuda_no_plan",
#"cuda_dump_kernels",
#"dump_dataflow_graph",
#"dump_optemplate_stages",
#"dump_dataflow_graph",
#"print_op_code",
"cuda_no_plan_el_local",
],
default_scalar_type=numpy.float32,
tune_for=op.sym_operator())
from grudge.visualization import SiloVisualizer, VtkVisualizer # noqa
#vis = VtkVisualizer(discr, rcon, "shearflow-%d" % order)
vis = SiloVisualizer(discr, rcon)
fields = box.volume_interpolant(0, discr)
navierstokes_ex = op.bind(discr)
max_eigval = [0]
def rhs(t, q):
ode_rhs, speed = navierstokes_ex(t, q)
max_eigval[0] = speed
return ode_rhs
rhs(0, fields)
if rcon.is_head_rank:
print("---------------------------------------------")
print("order %d" % order)
print("---------------------------------------------")
print("#elements=", len(mesh.elements))
from grudge.timestep import RK4TimeStepper
stepper = RK4TimeStepper()
# diagnostics setup ---------------------------------------------------
from logpyle import LogManager, add_general_quantities, \
add_simulation_quantities, add_run_info
logmgr = LogManager("navierstokes-%d.dat" % order, "w", rcon.communicator)
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
discr.add_instrumentation(logmgr)
stepper.add_instrumentation(logmgr)
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
from logpyle import LogQuantity
class ChangeSinceLastStep(LogQuantity):
"""Records the change of a variable between a time step and the previous
one"""
def __init__(self, name="change"):
LogQuantity.__init__(self, name, "1", "Change since last time step")
self.old_fields = 0
def __call__(self):
result = discr.norm(fields - self.old_fields)
self.old_fields = fields
return result
logmgr.add_quantity(ChangeSinceLastStep())
# timestep loop -------------------------------------------------------
try:
from grudge.timestep import times_and_steps
step_it = times_and_steps(
final_time=200,
#max_steps=500,
logmgr=logmgr,
max_dt_getter=lambda t: op.estimate_timestep(discr,
stepper=stepper, t=t, max_eigenvalue=max_eigval[0]))
for step, t, dt in step_it:
if step % 200 == 0:
#if False:
visf = vis.make_file("box-%d-%06d" % (order, step))
#rhs_fields = rhs(t, fields)
vis.add_data(visf,
[
("rho", discr.convert_volume(
op.rho(fields), kind="numpy")),
("e", discr.convert_volume(
op.e(fields), kind="numpy")),
("rho_u", discr.convert_volume(
op.rho_u(fields), kind="numpy")),
("u", discr.convert_volume(
op.u(fields), kind="numpy")),
# ("rhs_rho", discr.convert_volume(
# op.rho(rhs_fields), kind="numpy")),
# ("rhs_e", discr.convert_volume(
# op.e(rhs_fields), kind="numpy")),
# ("rhs_rho_u", discr.convert_volume(
# op.rho_u(rhs_fields), kind="numpy")),
],
expressions=[
("p", "(0.4)*(e- 0.5*(rho_u*u))"),
],
time=t, step=step
)
visf.close()
fields = stepper(fields, t, dt, rhs)
finally:
vis.close()
logmgr.save()
discr.close()
