def as_region(cell, layname):
''' Mostly a convenience brevity function.
If a layer isn't in the layer set, return an empty region instead of crashing
'''
try:
return pya.Region(cell.shapes(lys[layname]))
except KeyError:
return pya.Region()
def metal_pedestal(cell, pedestal_layer='wg_full_photo', offset=0, keepout=None):
metal_region = pya.Region()
for layname in ['m5_wiring', 'm5_gnd', 'gp_photo']:
try:
metal_region += as_region(cell, layname)
except: pass
valid_metal = metal_region - fast_sized(as_region(cell, lys.wg_deep), offset / dbu)
pedestal_region = fast_sized(valid_metal, offset / dbu)
if keepout is not None:
if not isinstance(keepout, (list, tuple)):
keepout = [keepout]
for ko_layer in keepout:
pedestal_region -= as_region(cell, ko_layer)
cell.shapes(lys[pedestal_layer]).insert(pedestal_region)
def fast_sized(input_region, xsize):
# if something goes wrong, you can fall back to regular here by uncommenting
if _thread_count is None:
return input_region.sized(xsize)
else:
output_region = pya.Region()
tp = pya.TilingProcessor()
tp.input('in1', input_region)
tp.output('out1', output_region)
tp.queue("_output(out1, in1.sized({}))".format(xsize))
tp.tile_size(2000., 2000.)
tp.tile_border(2 * xsize, 2 * xsize)
tp.threads = _thread_count
tp.execute('Sizing job')
return output_region
def turbo(input_region,
meth_name,
meth_args,
tile_border=1,
job_name='Tiling job'):
''' Speeds things up by tiling. Parameters are determined by _thread_count and _tiles
if _thread_count is 1, it does not invoke tile processor at all
tile_border is in microns. Recommended that you make it 1.1 * the critical dimension.
args is a list.
'''
if not isinstance(meth_args, (list, tuple)):
meth_args = [meth_args]
if _thread_count is None:
return getattr(input_region, meth_name)(*meth_args)
else:
output_region = pya.Region()
tp = pya.TilingProcessor()
tp.input('in1', input_region)
tp.output('out1', output_region)
clean_args = list()
for arg in meth_args:
if arg is True:
clean_args.append('true')
elif arg is False:
clean_args.append('false')
elif arg is None:
clean_args.append('nil')
elif isinstance(arg, (pya.Region, pya.EdgePairs)):
tp.input('in2', arg)
clean_args.append('in2')
else:
clean_args.append(str(arg))
job_str = '_output(out1, in1.{}({}))'.format(meth_name,
', '.join(clean_args))
tp.queue(job_str)
tp.tile_border(tile_border, tile_border)
tp.tiles(_tiles, _tiles)
tp.threads = _thread_count
tp.execute(job_name)
return output_region
def ground_plane(cell, Delta_gp=15.0, points_per_circle=100, air_open=None):
Delta_gp /= dbu
cell.clear(lys.gp_photo)
# Accumulate everything that we don't want to cover in metal
gp_exclusion_things = pya.Region()
for layname in ['wg_deep', 'wg_deep_photo', 'wg_shallow', 'm1_nwpad',
'm4_ledpad', 'm3_res', 'm5_wiring', 'm2_nw',
'GP_KO']:
try:
gp_exclusion_things += fast_smoothed(as_region(cell, layname))
except KeyError: pass
# Where ground plane is explicitly connected to wires, cut it out of the exclusion region
gnd_explicit = as_region(cell, 'm5_gnd')
gp_exclusion_tight = gp_exclusion_things - fast_sized(gnd_explicit, Delta_gp)
# Inflate the buffer around excluded things and pour
gp_exclusion_zone = fast_sized(gp_exclusion_tight, Delta_gp)
gp_region = as_region(cell, 'FLOORPLAN') - gp_exclusion_zone
# Connect to ground pads
gp_region.merge()
gp_region = fast_sized(gp_region, 1 / dbu) # kill narrow spaces
gp_region = fast_sized(gp_region, -2 / dbu) # kill narrow widths
gp_region = fast_sized(gp_region, 1 / dbu)
gp_region += as_region(cell, 'm5_gnd')
gp_region.round_corners(Delta_gp / 5, Delta_gp / 3, points_per_circle)
gp_region = gp_region.smoothed(.001) # avoid some bug in pya
gp_region.merge()
cell.shapes(lys.gp_photo).insert(gp_region)
# Open up to the air
if air_open is not None:
Delta_air = 5
fp_safe = as_region(cell, 'FLOORPLAN')
air_rects = fp_safe - fp_safe.sized(0, -air_open / dbu, 0)
air_region = air_rects & gp_region
air_region = fast_sized(air_region, -Delta_air / dbu)
air_region = fast_sized(air_region, 4 / dbu) # kill narrow spaces
air_region = fast_sized(air_region, -8 / dbu) # kill narrow widths
air_region = fast_sized(air_region, 4 / dbu)
air_region.round_corners(Delta_gp / 5, Delta_gp / 3, points_per_circle)
cell.shapes(lys.gp_v5).insert(air_region)
def fast_smoothed(unfiltered_region, deviation=0.1):
''' Removes any points that would change the shape by less than this deviation.
This is used to significantly decrease the number of points prior to sizing
Note: multicore does not work well with this, but it turns out to be pretty fast
'''
# if something goes wrong, you can fall back to regular here by uncommenting
return _normal_smoothed(unfiltered_region, deviation)
temp_region = unfiltered_region.dup()
temp_region.merged_semantics = False
output_region = pya.Region()
tp = pya.TilingProcessor()
tp.input('in1', temp_region)
tp.output('out1', output_region)
tp.queue("_output(out1, in1.smoothed({}))".format(deviation / dbu))
tp.tile_size(2000., 2000.)
tp.tile_border(5 * deviation, 5 * deviation)
tp.threads = _thread_count
tp.execute('Smoothing job')
return output_region
def fast_space(input_region, spacing, angle=90):
# if something goes wrong, you can fall back to regular here by uncommenting
if _thread_count is None:
return input_region.space_check(spacing)
else:
output_edge_pairs = pya.Region()
tp = pya.TilingProcessor()
tp.input('in1', input_region)
tp.output('out1', output_edge_pairs)
# tp.queue("_output(out1, in1.space_check({}))".format(spacing))
tp.queue(
"_output(out1, in1.space_check({}, false, nil, {}, nil, nil))".
format(spacing, angle))
border = 1.1 * spacing
tp.tile_border(border, border)
tp.tiles(_tiles, _tiles)
# bbox = input_region.bbox()
# die_wh = [bbox.width(), bbox.height()]
# tile_wh = [dim / _tiles for dim in die_wh]
# border_area = 2 * (tile_wh[0] + tile_wh[1]) * border
tp.threads = _thread_count
tp.execute('Spacing job')
return output_edge_pairs
def run_xor(file1, file2, tolerance=1, verbose=False):
''' Returns nothing. Raises a GeometryDifference if there are differences detected
'''
l1 = pya.Layout()
l1.read(file1)
l2 = pya.Layout()
l2.read(file2)
# Check that same set of layers are present
layer_pairs = []
for ll1 in l1.layer_indices():
li1 = l1.get_info(ll1)
ll2 = l2.find_layer(l1.get_info(ll1))
if ll2 is None:
raise GeometryDifference(
"Layer {} of layout {} not present in layout {}.".format(
li1, file1, file2))
layer_pairs.append((ll1, ll2))
for ll2 in l2.layer_indices():
li2 = l2.get_info(ll2)
ll1 = l1.find_layer(l2.get_info(ll2))
if ll1 is None:
raise GeometryDifference(
"Layer {} of layout {} not present in layout {}.".format(
li2, file2, file1))
# Check that topcells are the same
tc1_names = [tc.name for tc in l1.top_cells()]
tc2_names = [tc.name for tc in l2.top_cells()]
tc1_names.sort()
tc2_names.sort()
if not tc1_names == tc2_names:
raise GeometryDifference(
"Missing topcell on one of the layouts, or name differs:\n{}\n{}".
format(tc1_names, tc2_names))
topcell_pairs = []
for tc1_n in tc1_names:
topcell_pairs.append((l1.cell(tc1_n), l2.cell(tc1_n)))
# Check that dbu are the same
if (l1.dbu - l2.dbu) > 1e-6:
raise GeometryDifference(
"Database unit of layout {} ({}) differs from that of layout {} ({})."
.format(file1, l1.dbu, file2, l2.dbu))
# Run the difftool
diff = False
for tc1, tc2 in topcell_pairs:
for ll1, ll2 in layer_pairs:
r1 = pya.Region(tc1.begin_shapes_rec(ll1))
r2 = pya.Region(tc2.begin_shapes_rec(ll2))
rxor = r1 ^ r2
if tolerance > 0:
rxor.size(-tolerance)
if not rxor.is_empty():
diff = True
if verbose:
print("{} differences found in {} on layer {}.".format(
rxor.size(), tc1.name, l1.get_info(ll1)))
else:
if verbose:
print("No differences found in {} on layer {}.".format(
tc1.name, l1.get_info(ll1)))
if diff:
fn_abgd = []
for fn in [file1, file2]:
head, tail = os.path.split(fn)
abgd = os.path.join(os.path.basename(head), tail)
fn_abgd.append(abgd)
raise GeometryDifference(
"Differences found between layouts {} and {}".format(*fn_abgd))
