def createSnapshot(self, volumeid):
     try:
         Snapshot.create(
             self.apiclient,
             volumeid
         )
     except Exception as e:
         self.debug("Exception occurred: %s" % e)
         self.exceptionOccured = True
 def createSnapshot(self, volumeid):
     try:
         Snapshot.create(
             self.apiclient,
             volumeid
         )
     except Exception as e:
         self.debug("Exception occured: %s" % e)
         self.exceptionOccured = True
예제 #3
0
    def test_01_check_revert_snapshot(self):
        """ Test revert snapshot on XenServer

        # 1. Deploy a VM.
        # 2. Take VM snapshot.
        # 3. Verify that volume snapshot fails with error 
                can not create volume snapshot for VM with VM-snapshot

        """
        # Step 1
        vm = VirtualMachine.create(
            self.userapiclient,
            self.testdata["small"],
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
        )
        volumes_cluster_list = list_volumes(
                self.apiclient,
                virtualmachineid=vm.id,
                type='ROOT',
                listall=True
                )

        volume_list_validation = validateList(volumes_cluster_list)

	self.assertEqual(
                volume_list_validation[0],
                PASS,
                "Event list validation failed due to %s" %
		volume_list_validation[2]
            )
 
        root_volume = volumes_cluster_list[0]
        
        #Step 2
        vm_snap = VmSnapshot.create(self.apiclient,
                vm.id)

	self.assertEqual(
			vm_snap.state,
			"Ready",
			"Check the snapshot of vm is ready!"
			)


        #Step 3
        with self.assertRaises(Exception):
            Snapshot.create(
                    self.apiclient,
                    root_volume.id)

        return
예제 #4
0
    def test_05_snapshots_per_project(self):
        """Test Snapshot limit per project
        """
        # Validate the following
        # 1. set max no of snapshots per project to 1.
        # 2. Create one snapshot in the project. Snapshot should be
        #    successfully created
        # 5. Try to create another snapshot in this project. It should give
        #    user an appropriate error and an alert should be generated.

        if self.hypervisor.lower() in ["hyperv"]:
            raise self.skipTest("Snapshots feature is not supported on Hyper-V")
        self.debug("Updating snapshot resource limits for project: %s" % self.project.id)
        # Set usage_vm=1 for Account 1
        update_resource_limit(self.apiclient, 3, max=1, projectid=self.project.id)  # Snapshot

        self.debug("Deploying VM for account: %s" % self.account.name)
        virtual_machine_1 = VirtualMachine.create(
            self.apiclient,
            self.services["server"],
            templateid=self.template.id,
            serviceofferingid=self.service_offering.id,
            projectid=self.project.id,
        )
        self.cleanup.append(virtual_machine_1)
        # Verify VM state
        self.assertEqual(virtual_machine_1.state, "Running", "Check VM state is Running or not")

        # Get the Root disk of VM
        volumes = list_volumes(
            self.apiclient, virtualmachineid=virtual_machine_1.id, projectid=self.project.id, type="ROOT"
        )
        self.assertEqual(isinstance(volumes, list), True, "Check for list volume response return valid data")

        self.debug("Creating snapshot from volume: %s" % volumes[0].id)
        # Create a snapshot from the ROOTDISK
        snapshot_1 = Snapshot.create(self.apiclient, volumes[0].id, projectid=self.project.id)
        self.cleanup.append(snapshot_1)

        # list snapshots
        snapshots = list_snapshots(self.apiclient, projectid=self.project.id)

        self.debug("snapshots list: %s" % snapshots)

        self.assertEqual(validateList(snapshots)[0], PASS, "Snapshots list validation failed")
        self.assertEqual(len(snapshots), 1, "Snapshots list should have exactly one entity")

        # Exception should be raised for second snapshot
        with self.assertRaises(Exception):
            Snapshot.create(self.apiclient, volumes[0].id, projectid=self.project.id)
        return
예제 #5
0
    def test_07_snapshot_to_template_bypass_secondary(self):
        ''' Create template from snapshot bypassing secondary storage
        '''
        ##cls.virtual_machine
        volume = list_volumes(self.apiclient,
                              virtualmachineid=self.virtual_machine.id)
        snapshot = Snapshot.create(self.apiclient, volume_id=volume[0].id)

        backup_config = list_configurations(self.apiclient,
                                            name="sp.bypass.secondary.storage")
        if (backup_config[0].value == "false"):
            backup_config = Configurations.update(
                self.apiclient,
                name="sp.bypass.secondary.storage",
                value="true")
        self.assertIsNotNone(snapshot, "Could not create snapshot")
        self.assertIsInstance(snapshot, Snapshot,
                              "Snapshot is not an instance of Snapshot")

        template = self.create_template_from_snapshot(self.apiclient,
                                                      self.services,
                                                      snapshotid=snapshot.id)
        virtual_machine = VirtualMachine.create(
            self.apiclient, {"name": "StorPool-%d" % random.randint(0, 100)},
            zoneid=self.zone.id,
            templateid=template.id,
            serviceofferingid=self.service_offering.id,
            hypervisor=self.hypervisor,
            rootdisksize=10)
        ssh_client = virtual_machine.get_ssh_client()
        self.assertIsNotNone(template, "Template is None")
        self.assertIsInstance(template, Template,
                              "Template is instance of template")
        self._cleanup.append(snapshot)
        self._cleanup.append(template)
예제 #6
0
    def _create_and_test_snapshot(self, cs_vol_id, primary_storage_db_id,
                                  expected_num_snapshots, err_mesg):

        vol_snap = Snapshot.create(self.apiClient, volume_id=cs_vol_id)

        list_volumes_response = list_volumes(self.apiClient, id=cs_vol_id)

        cs_volume = list_volumes_response[0]
        dt_volume = self._get_dt_volume_for_cs_volume(cs_volume)

        dt_snapshots = self._get_native_snapshots_for_dt_volume(dt_volume)

        self._check_list(dt_snapshots, expected_num_snapshots, err_mesg)

        dt_snapshot = self._most_recent_dt_snapshot(dt_snapshots)

        vol_snap_db_id = self._get_cs_volume_snapshot_db_id(vol_snap)

        snapshot_details = self._get_snapshot_details(vol_snap_db_id)

        dt_volume_id = self._get_app_instance_name_from_cs_volume(cs_volume)

        dt_snapshot_id = dt_volume_id + ':' + dt_snapshot['timestamp']

        self._check_snapshot_details(snapshot_details, vol_snap_db_id,
                                     dt_volume_id, dt_snapshot_id,
                                     primary_storage_db_id)
        return vol_snap
예제 #7
0
    def test_15_snapshot_root_vol_glid(self):
        vm = VirtualMachine.create(self.apiclient,
                                   {"name": "StorPool-%s" % uuid.uuid4()},
                                   zoneid=self.zone.id,
                                   templateid=self.template.id,
                                   serviceofferingid=self.service_offering.id,
                                   hypervisor=self.hypervisor,
                                   rootdisksize=10)
        list = list_volumes(self.apiclient,
                            virtualmachineid=vm.id,
                            type="ROOT")
        self.assertIsNotNone(list, "Could not find ROOT volume")

        self.helper.storpool_volume_globalid(list[0])

        snapshot = Snapshot.create(
            self.apiclient,
            volume_id=list[0].id,
        )
        self.assertIsNotNone(snapshot, "Could not create snapshot")

        self.assertIsInstance(snapshot, Snapshot,
                              "Created snapshot is not instance of Snapshot")

        self.helper.storpool_snapshot_globalid(snapshot)

        self._cleanup.append(vm)
        self._cleanup.append(snapshot)
예제 #8
0
 def test_04_snapshot_volume_bypass_secondary(self):
     '''
         Test snapshot bypassing secondary
     '''
     Configurations.update(self.apiclient,
         name = "sp.bypass.secondary.storage",
         value = "true")
     volume = list_volumes(
                     self.apiclient,
                     virtualmachineid = self.virtual_machine.id,
                     type = "ROOT",
                     listall = True,
                     )
     snapshot = Snapshot.create(
        self.apiclient,
         volume_id = volume[0].id,
         account=self.account.name,
         domainid=self.account.domainid,
         )
     try:
         cmd = getVolumeSnapshotDetails.getVolumeSnapshotDetailsCmd()
         cmd.snapshotid = snapshot.id
         snapshot_details = self.apiclient.getVolumeSnapshotDetails(cmd)
         flag = False
         for s in snapshot_details:
             if s["snapshotDetailsName"] == snapshot.id:
                 name = s["snapshotDetailsValue"].split("/")[3]
                 sp_snapshot = self.spapi.snapshotList(snapshotName = "~" + name)
                 flag = True
                 self.debug('################ %s' % sp_snapshot)
         if flag == False:
             raise Exception("Could not find snapshot in snapshot details")
     except spapi.ApiError as err:
         raise Exception(err)
     self.assertIsNotNone(snapshot, "Could not create snapshot")
예제 #9
0
    def test_01_verify_events_table(self):
        """ Test events table

        # 1. Deploy a VM.
        # 2. Take VM snapshot.
        # 3. Verify that events table records UUID of the volume in descrption
            instead of volume ID
        """
        # Step 1
        # Create VM
        vm = VirtualMachine.create(
            self.userapiclient,
            self.testdata["small"],
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
        )
        volumes_list = list_volumes(self.apiclient,
                                    virtualmachineid=vm.id,
                                    type='ROOT',
                                    listall=True)

        volume_list_validation = validateList(volumes_list)
        self.assertEqual(
            volume_list_validation[0], PASS,
            "volume list validation failed due to %s" %
            volume_list_validation[2])
        root_volume = volumes_list[0]

        # Step 2
        # Create snapshot of root volume
        snapshot = Snapshot.create(self.apiclient, root_volume.id)

        snapshots_list = Snapshot.list(self.userapiclient, id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], PASS, "Snapshots List Validation Failed")

        self.assertEqual(snapshot.state, "BackedUp",
                         "Check if snapshot gets created properly")

        # Step 3
        qresultset = self.dbclient.execute(
            "select  description from event where type='SNAPSHOT.CREATE' AND \
                        description like '%%%s%%'" % root_volume.id)

        event_validation_result = validateList(qresultset)

        self.assertEqual(
            event_validation_result[0], PASS,
            "event list validation failed due to %s" %
            event_validation_result[2])

        self.assertNotEqual(
            len(qresultset), 0,
            "Check if events table records UUID of the volume")

        return
예제 #10
0
    def test_04_delete_snapshot(self):
        """Test Delete Snapshot
        """

        # 1. Snapshot the Volume
        # 2. Delete the snapshot
        # 3. Verify snapshot is removed by calling List Snapshots API
        # 4. Verify snapshot was removed from image store

        self.debug("Creating volume under account: %s" % self.account.name)
        volume = Volume.create(
            self.apiclient,
            self.services["volume"],
            zoneid=self.zone.id,
            account=self.account.name,
            domainid=self.account.domainid,
            diskofferingid=self.disk_offering.id,
        )
        self.debug("Created volume: %s" % volume.id)
        self.debug("Attaching volume to vm: %s" % self.virtual_machine.id)

        self.virtual_machine.attach_volume(self.apiclient, volume)
        self.debug("Volume attached to vm")

        volumes = list_volumes(self.apiclient, virtualmachineid=self.virtual_machine.id, type="DATADISK", id=volume.id)
        self.assertEqual(isinstance(volumes, list), True, "Check list response returns a valid list")
        snapshot = Snapshot.create(
            self.apiclient, volumes[0].id, account=self.account.name, domainid=self.account.domainid
        )
        snapshot.delete(self.apiclient)
        snapshots = list_snapshots(self.apiclient, id=snapshot.id)
        self.assertEqual(snapshots, None, "Check if result exists in list item call")
        self.assertFalse(is_snapshot_on_nfs(self.apiclient, self.dbclient, self.config, self.zone.id, snapshot.id))
        return
예제 #11
0
    def test_08_vcpolicy_tag_to_reverted_disk(self):
        tag = Tag.create(self.apiclient,
                         resourceIds=self.virtual_machine2.id,
                         resourceType='UserVm',
                         tags={'vc-policy': 'testing_vc-policy'})
        vm = list_virtual_machines(self.apiclient,
                                   id=self.virtual_machine2.id,
                                   listall=True)
        vm_tags = vm[0].tags

        volume = Volume.list(self.apiclient,
                             virtualmachineid=self.virtual_machine2.id,
                             listall=True,
                             type="ROOT")
        self.vc_policy_tags(volume, vm_tags, vm)

        snapshot = Snapshot.create(self.apiclient,
                                   volume[0].id,
                                   account=self.account.name,
                                   domainid=self.account.domainid)

        virtual_machine = self.virtual_machine2.stop(self.apiclient,
                                                     forced=True)

        cmd = revertSnapshot.revertSnapshotCmd()
        cmd.id = snapshot.id
        revertedn = self.apiclient.revertSnapshot(cmd)

        vm = list_virtual_machines(self.apiclient, id=self.virtual_machine2.id)
        vm_tags = vm[0].tags

        vol = list_volumes(self.apiclient, id=snapshot.volumeid, listall=True)
        self.vc_policy_tags(vol, vm_tags, vm)
예제 #12
0
    def test_08_migrate_vm_live_with_snapshots_on_remote(self):
        """
        Create snapshots on all the volumes, Migrate all the volumes and VM.
        """
        global vm2
        # Get ROOT Volume
        vol_for_snap = list_volumes(
            self.apiclient,
            virtualmachineid=vm2.id,
            listall=True)
        for vol in vol_for_snap:
            snapshot = Snapshot.create(
                self.apiclient,
                volume_id=vol.id
            )
            globalId = self.storpool_snapshot_globalid(snapshot)
            sn = sptypes.SnapshotUpdateDesc(rename = snapshot.id)
    
            rename = self.spapi.snapshotUpdate(snapshotName = globalId, json = sn)
            snapshot.validateState(
                self.apiclient,
                snapshotstate="backedup",
            )
            self._cleanup.append(snapshot)
        # Migrate all volumes and VMs

        destinationHost, vol_list = self.get_destination_pools_hosts(vm2)
        vm2 = self.migrateVm(self.virtual_machine_on_remote, destinationHost)
예제 #13
0
    def test_13_snapshot_detached_vol_with_glid(self):
        volume = Volume.create(
            self.apiclient,
            {"diskname": "StorPoolDisk-GlId-%d" % random.randint(0, 100)},
            zoneid=self.zone.id,
            diskofferingid=self.disk_offering.id,
        )

        self.virtual_machine3.start(self.apiclient)
        self.virtual_machine3.attach_volume(self.apiclient, volume)
        list = list_volumes(self.apiclient,
                            virtualmachineid=self.virtual_machine3.id,
                            id=volume.id)

        self.assertIsNotNone(list, "Volume was not attached")

        self.helper.storpool_volume_globalid(list[0])
        self.virtual_machine3.stop(self.apiclient, forced=True)

        snapshot = Snapshot.create(
            self.apiclient,
            volume_id=volume.id,
        )

        self.assertIsNotNone(snapshot, "Could not create snapshot")

        self.helper.storpool_snapshot_globalid(snapshot)

        self._cleanup.append(volume)
        self._cleanup.append(snapshot)
예제 #14
0
    def test_01_snapshot_detached_volume(self):
        ''' Test Snapshot Detached Volume
        '''
        self.virtual_machine.stop(
            self.apiClient,
            forced = True
            )
        self.volume = self.virtual_machine.attach_volume(
            self.apiClient,
            self.volume
            )
        self.assertIsNotNone(self.volume, "Attach: Is none")
        self.volume = self.virtual_machine.detach_volume(
            self.apiClient,
            self.volume
            )

        self.assertIsNotNone(self.volume, "Detach: Is none")

        snapshot = Snapshot.create(
            self.apiClient,
            self.volume.id,
            )

        self.assertIsNotNone(snapshot, "Snapshot is None")

        self.assertIsInstance(snapshot, Snapshot, "Snapshot is not Instance of Snappshot")

        snapshot = Snapshot.delete(
            snapshot,
            self.apiClient
            )

        self.assertIsNone(snapshot, "Snapshot was not deleted")
    def test_08_migrate_vm_live_with_snapshots_on_remote(self):
        """
        Create snapshots on all the volumes, Migrate all the volumes and VM.
        """
        global vm2
        # Get ROOT Volume
        vol_for_snap = list_volumes(self.apiclient,
                                    virtualmachineid=vm2.id,
                                    listall=True)
        for vol in vol_for_snap:
            snapshot = Snapshot.create(
                self.apiclient,
                volume_id=vol.id,
                account=self.account.name,
                domainid=self.account.domainid,
            )
            snapshot.validateState(
                self.apiclient,
                snapshotstate="backedup",
            )
        # Migrate all volumes and VMs

        destinationHost, vol_list = self.helper.get_destination_pools_hosts(
            self.apiclient, vm2, self.host_remote)
        vm2 = self.helper.migrateVm(self.apiclient,
                                    self.virtual_machine_on_remote,
                                    destinationHost)
예제 #16
0
    def test_12_migrate_vm_live_with_snapshots_on_remote(self):
        """
        Create snapshots on all the volumes, Migrate all the volumes and VM.
        """
        global vm2
        # Get ROOT Volume
        vol_for_snap = list_volumes(
            self.apiclient,
            virtualmachineid=vm2.id,
            listall=True)
        for vol in vol_for_snap:
            snapshot = Snapshot.create(
                self.apiclient,
                volume_id=vol.id
            )
            snapshot.validateState(
                self.apiclient,
                snapshotstate="backedup",
            )
        # Migrate all volumes and VMs

        destinationHost,  vol_list = self.helper.get_destination_pools_hosts(self.apiclient, vm2, self.host_remote)
        for v in vol_list:
            self.helper.check_storpool_volume_iops(self.spapi, v)
        vm2 = self.helper.migrateVm(self.apiclient, self.virtual_machine_live_migration_2, destinationHost)
        destinationHost,  vol_list = self.helper.get_destination_pools_hosts(self.apiclient, vm2, self.host_remote)
        for v in vol_list:
            self.helper.check_storpool_volume_iops(self.spapi, v)
예제 #17
0
    def test_02_snapshot_data_disk(self):
        """Test Snapshot Data Disk
        """
        volume = list_volumes(
            self.apiclient,
            virtualmachineid=self.virtual_machine_with_disk.id,
            type='DATADISK',
            listall=True)
        self.assertEqual(isinstance(volume, list), True,
                         "Check list response returns a valid list")

        self.debug("Creating a Snapshot from data volume: %s" % volume[0].id)
        snapshot = Snapshot.create(self.apiclient,
                                   volume[0].id,
                                   account=self.account.name,
                                   domainid=self.account.domainid)
        snapshots = list_snapshots(self.apiclient, id=snapshot.id)
        self.assertEqual(isinstance(snapshots, list), True,
                         "Check list response returns a valid list")
        self.assertNotEqual(snapshots, None,
                            "Check if result exists in list item call")
        self.assertEqual(snapshots[0].id, snapshot.id,
                         "Check resource id in list resources call")
        self.assertTrue(
            is_snapshot_on_nfs(self.apiclient, self.dbclient, self.config,
                               self.zone.id, snapshot.id))
        return
예제 #18
0
    def test_05_snapshot_events(self):
        """Test snapshot events
        """
        # Validate the following
        # 1. Perform snapshot on the root disk of this VM and check the events/alerts.
        # 2. delete the snapshots and check the events/alerts
        # 3. listEvents() shows created/deleted snapshot events

        # Get the Root disk of VM
        volumes = list_volumes(self.apiclient, virtualmachineid=self.virtual_machine.id, type="ROOT", listall=True)
        self.assertEqual(isinstance(volumes, list), True, "Check list response returns a valid list")
        volume = volumes[0]

        # Create a snapshot from the ROOTDISK
        snapshot = Snapshot.create(self.apiclient, volume.id)
        self.debug("Snapshot created with ID: %s" % snapshot.id)

        snapshots = list_snapshots(self.apiclient, id=snapshot.id)
        self.assertEqual(isinstance(snapshots, list), True, "Check list response returns a valid list")
        self.assertNotEqual(snapshots, None, "Check if result exists in list snapshots call")
        self.assertEqual(snapshots[0].id, snapshot.id, "Check snapshot id in list resources call")
        snapshot.delete(self.apiclient)

        # Sleep to ensure that snapshot is deleted properly
        time.sleep(self.services["sleep"])
        events = list_events(
            self.apiclient, account=self.account.name, domainid=self.account.domainid, type="SNAPSHOT.DELETE"
        )
        self.assertEqual(isinstance(events, list), True, "Check list response returns a valid list")
        self.assertNotEqual(events, None, "Check if event exists in list events call")
        self.assertIn(events[0].state, ["Completed", "Scheduled"], "Check events state in list events call")
        return
예제 #19
0
    def test_01_snapshot_root_disk(self):
        """Test Snapshot Root Disk
        """

        # Validate the following
        # 1. listSnapshots should list the snapshot that was created.
        # 2. verify that secondary storage NFS share contains
        #    the reqd volume under
        #    /secondary/snapshots//$account_id/$volumeid/$snapshot_uuid
        # 3. verify backup_snap_id was non null in the `snapshots` table
        # 4. Verify that zoneid is returned in listSnapshots API response

        volumes = list_volumes(
            self.apiclient,
            virtualmachineid=self.virtual_machine_with_disk.id,
            type='ROOT',
            listall=True)

        snapshot = Snapshot.create(self.apiclient,
                                   volumes[0].id,
                                   account=self.account.name,
                                   domainid=self.account.domainid)
        self.cleanup.append(snapshot)
        self.debug("Snapshot created: ID - %s" % snapshot.id)

        snapshots = list_snapshots(self.apiclient, id=snapshot.id)
        self.assertEqual(isinstance(snapshots, list), True,
                         "Check list response returns a valid list")

        self.assertNotEqual(snapshots, None,
                            "Check if result exists in list item call")
        self.assertEqual(snapshots[0].id, snapshot.id,
                         "Check resource id in list resources call")

        self.assertIsNotNone(snapshots[0].zoneid,
                             "Zone id is not none in listSnapshots")
        self.assertEqual(snapshots[0].zoneid, self.zone.id,
                         "Check zone id in the list snapshots")

        self.debug(
            "select backup_snap_id, account_id, volume_id from snapshots where uuid = '%s';"
            % str(snapshot.id))
        qresultset = self.dbclient.execute(
            "select backup_snap_id, account_id, volume_id from snapshots where uuid = '%s';"
            % str(snapshot.id))
        self.assertNotEqual(len(qresultset), 0, "Check DB Query result set")

        qresult = qresultset[0]

        snapshot_uuid = qresult[0]  # backup_snap_id = snapshot UUID

        self.assertNotEqual(str(snapshot_uuid), 'NULL',
                            "Check if backup_snap_id is not null")

        self.assertTrue(
            is_snapshot_on_nfs(self.apiclient, self.dbclient, self.config,
                               self.zone.id, snapshot.id))
        return
예제 #20
0
    def setUpClass(cls):
        cls.testClient = super(TestAccountSnapshotClean,
                               cls).getClsTestClient()
        cls.api_client = cls.testClient.getApiClient()

        cls.services = Services().services
        # Get Zone, Domain and templates
        cls.domain = get_domain(cls.api_client)
        cls.zone = get_zone(cls.api_client, cls.testClient.getZoneForTests())
        cls.services['mode'] = cls.zone.networktype
        cls.hypervisor = cls.testClient.getHypervisorInfo()
        if cls.hypervisor.lower() in ['lxc']:
            raise unittest.SkipTest("snapshots are not supported on %s" %
                                    cls.hypervisor.lower())

        template = get_template(cls.api_client, cls.zone.id,
                                cls.services["ostype"])
        cls.services["server"]["zoneid"] = cls.zone.id

        cls.services["template"] = template.id
        cls._cleanup = []

        try:
            # Create VMs, NAT Rules etc
            cls.account = Account.create(cls.api_client,
                                         cls.services["account"],
                                         domainid=cls.domain.id)

            cls.services["account"] = cls.account.name

            if cls.zone.localstorageenabled:
                cls.services["service_offering"]["storagetype"] = "local"
            cls.service_offering = ServiceOffering.create(
                cls.api_client, cls.services["service_offering"])

            cls.virtual_machine = VirtualMachine.create(
                cls.api_client,
                cls.services["server"],
                templateid=template.id,
                accountid=cls.account.name,
                domainid=cls.account.domainid,
                serviceofferingid=cls.service_offering.id)

            # Get the Root disk of VM
            volumes = list_volumes(cls.api_client,
                                   virtualmachineid=cls.virtual_machine.id,
                                   type='ROOT',
                                   listall=True)
            volume = volumes[0]

            # Create a snapshot from the ROOTDISK
            cls.snapshot = Snapshot.create(cls.api_client, volume.id)
        except Exception as e:
            cls.tearDownClass()
            unittest.SkipTest("setupClass fails for %s" % cls.__name__)
            raise e
        return
예제 #21
0
    def test_01_check_revert_snapshot(self):
        """ Test revert snapshot on XenServer

        # 1. Deploy a VM.
        # 2. Take VM snapshot.
        # 3. Verify that volume snapshot fails with error 
                can not create volume snapshot for VM with VM-snapshot

        """
        # Step 1
        vm = VirtualMachine.create(
            self.userapiclient,
            self.testdata["small"],
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
        )
        volumes_cluster_list = list_volumes(self.apiclient,
                                            virtualmachineid=vm.id,
                                            type='ROOT',
                                            listall=True)

        volume_list_validation = validateList(volumes_cluster_list)

        self.assertEqual(
            volume_list_validation[0], PASS,
            "Event list validation failed due to %s" %
            volume_list_validation[2])

        root_volume = volumes_cluster_list[0]

        #Step 2
        vm_snap = VmSnapshot.create(self.apiclient, vm.id)

        self.assertEqual(vm_snap.state, "Ready",
                         "Check the snapshot of vm is ready!")

        #Step 3
        with self.assertRaises(Exception):
            Snapshot.create(self.apiclient, root_volume.id)

        return
예제 #22
0
    def test_01_test_vm_volume_snapshot(self):
        """
        @Desc: Test that Volume snapshot for root volume is allowed
        when VM snapshot is present for the VM
        @Steps:
        1: Deploy a VM and create a VM snapshot for VM
        2: Try to create snapshot for the root volume of the VM,
        It should not fail
        """

        # Creating Virtual Machine
        virtual_machine = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
        )

        VmSnapshot.create(
            self.apiclient,
            virtual_machine.id,
        )

        volumes = Volume.list(self.apiclient,
                              virtualmachineid=virtual_machine.id,
                              type="ROOT",
                              listall=True)

        self.assertEqual(validateList(volumes)[0], PASS,
                "Failed to get root volume of the VM")

        snapshot = Snapshot.create(
            self.apiclient,
            volumes[0].id,
            account=self.account.name,
            domainid=self.account.domainid
        )
        self.debug("Snapshot created: ID - %s" % snapshot.id)
        snapshots = list_snapshots(
            self.apiclient,
            id=snapshot.id
        )
        self.assertEqual(
            validateList(snapshots)[0],
            PASS,
            "Invalid snapshot list"
        )
        self.assertEqual(
            snapshots[0].id,
            snapshot.id,
            "Check resource id in list resources call"
        )
        return
예제 #23
0
    def test_01_test_vm_volume_snapshot(self):
        """
        @Desc: Test that Volume snapshot for root volume is allowed
        when VM snapshot is present for the VM
        @Steps:
        1: Deploy a VM and create a VM snapshot for VM
        2: Try to create snapshot for the root volume of the VM,
        It should not fail
        """

        # Creating Virtual Machine
        virtual_machine = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
        )

        VmSnapshot.create(
            self.apiclient,
            virtual_machine.id,
        )

        volumes = Volume.list(self.apiclient,
                              virtualmachineid=virtual_machine.id,
                              type="ROOT",
                              listall=True)

        self.assertEqual(validateList(volumes)[0], PASS,
                "Failed to get root volume of the VM")

        snapshot = Snapshot.create(
            self.apiclient,
            volumes[0].id,
            account=self.account.name,
            domainid=self.account.domainid
        )
        self.debug("Snapshot created: ID - %s" % snapshot.id)
        snapshots = list_snapshots(
            self.apiclient,
            id=snapshot.id
        )
        self.assertEqual(
            validateList(snapshots)[0],
            PASS,
            "Invalid snapshot list"
        )
        self.assertEqual(
            snapshots[0].id,
            snapshot.id,
            "Check resource id in list resources call"
        )
        return
    def test_05_snapshot_root_disk_working_vm_on_remote(self):
        """ Snapshot root disk on running virtual machine on remote"""
        volume = list_volumes(self.apiclient,
                              virtualmachineid=self.virtual_machine.id,
                              type="ROOT",
                              listall=True)

        snapshot = Snapshot.create(self.apiclient,
                                   volume[0].id,
                                   account=self.account.name,
                                   domainid=self.account.domainid)
        self.assertIsNotNone(snapshot, "Could not create snapshot from ROOT")
    def test_14_snapshot_root_vol_with_uuid(self):
        list = list_volumes(self.apiclient, virtualmachineid = self.virtual_machine.id, type = "ROOT")
        self.assertIsNotNone(list, "Could not find ROOT volume")

        self.helper.storpool_volume_globalid(list[0])

        snapshot = Snapshot.create(self.apiclient, volume_id =  list[0].id,)

        self.assertIsNotNone(snapshot, "Could not create snapshot")

        self.helper.storpool_snapshot_globalid(snapshot)
        self._cleanup.append(snapshot)
예제 #26
0
 def create_snapshot(cls, bypassed, virtual_machine):
     volume = Volume.list(
         cls.testClass.apiclient,
         virtualmachineid = virtual_machine.id,
         type = "ROOT"
         )
     cls.bypass_secondary(bypassed)
     cfg.logger.info('Create snapshot bypassed secondary %s' % bypassed)
     return Snapshot.create(
        cls.testClass.apiclient,
         volume_id = volume[0].id
         )
예제 #27
0
    def test_08_snapshot_detached_volume(self):
        ''' Test Snapshot Detached Volume
        '''
        self.virtual_machine.stop(
            self.apiclient,
            forced = True
            )
        self.volume = self.virtual_machine.attach_volume(
            self.apiclient,
            self.volume
            )
        self.assertIsNotNone(self.volume, "Attach: Is none")
        self.volume = self.virtual_machine.detach_volume(
            self.apiclient,
            self.volume
            )

        self.assertIsNotNone(self.volume, "Detach: Is none")
 
        snapshot = Snapshot.create(
            self.apiclient,
            self.volume.id,
            account=self.account.name,
            domainid=self.account.domainid,
            )

        try:
            cmd = getVolumeSnapshotDetails.getVolumeSnapshotDetailsCmd()
            cmd.snapshotid = snapshot.id
            snapshot_details = self.apiclient.getVolumeSnapshotDetails(cmd)
            flag = False
            for s in snapshot_details:
                if s["snapshotDetailsName"] == snapshot.id:
                    name = s["snapshotDetailsValue"].split("/")[3]
                    sp_snapshot = self.spapi.snapshotList(snapshotName = "~" + name)
                    self.debug('################ %s' % sp_snapshot)
                    flag = True
            if flag == False:
                raise Exception("Could not find snapshot in snapshot details")
        except spapi.ApiError as err:
           raise Exception(err)

        self.assertIsNotNone(snapshot, "Snapshot is None")

        self.assertIsInstance(snapshot, Snapshot, "Snapshot is not Instance of Snappshot")

        snapshot = Snapshot.delete(
            snapshot,
            self.apiclient
            )

        self.assertIsNone(snapshot, "Snapshot was not deleted")
예제 #28
0
    def test_02_snapshot_data_disk(self):
        """Test Snapshot Data Disk
        """
        if self.hypervisor.lower() in ['hyperv']:
            self.skipTest("Snapshots feature is not supported on Hyper-V")

        volume = list_volumes(
            self.apiclient,
            virtualmachineid=self.virtual_machine_with_disk.id,
            type='DATADISK',
            listall=True
        )
        self.assertEqual(
            isinstance(volume, list),
            True,
            "Check list response returns a valid list"
        )

        self.debug("Creating a Snapshot from data volume: %s" % volume[0].id)
        snapshot = Snapshot.create(
            self.apiclient,
            volume[0].id,
            account=self.account.name,
            domainid=self.account.domainid
        )
        snapshots = list_snapshots(
            self.apiclient,
            id=snapshot.id
        )
        self.assertEqual(
            isinstance(snapshots, list),
            True,
            "Check list response returns a valid list"
        )
        self.assertNotEqual(
            snapshots,
            None,
            "Check if result exists in list item call"
        )
        self.assertEqual(
            snapshots[0].id,
            snapshot.id,
            "Check resource id in list resources call"
        )
        self.assertTrue(
            is_snapshot_on_nfs(
                self.apiclient,
                self.dbclient,
                self.config,
                self.zone.id,
                snapshot.id))
        return
    def test_12_snapshot_detached_vol_with_uuid(self):
        #volume is created with UUID, but after DB update, has to be with it's globalId
        volume = Volume.list(self.apiclient, id = self.volume6.id )

        self.helper.storpool_volume_globalid(volume[0])

        snapshot = Snapshot.create(self.apiclient, volume_id = self.volume6.id,)

        self.assertIsNotNone(snapshot, "Could not create snapshot")

        self.helper.storpool_snapshot_globalid(snapshot)

        self._cleanup.append(snapshot)
    def test_01_test_vm_volume_snapshot(self):
        """
        @Desc: Test that Volume snapshot for root volume is not allowed
        when VM snapshot is present for the VM
        @Steps:
        1: Deploy a VM and create a VM snapshot for VM
        2: Try to create snapshot for the root volume of the VM,
        It should expect Exception
        """

        # Creating Virtual Machine
        virtual_machine = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
        )

        VmSnapshot.create(
            self.apiclient,
            virtual_machine.id,
        )

        volumes = Volume.list(self.apiclient,
                              virtualmachineid=virtual_machine.id,
                              type="ROOT",
                              listall=True)

        self.assertEqual(
            validateList(volumes)[0], PASS,
            "Failed to get root volume of the VM")

        volume = volumes[0]

        with self.assertRaises(Exception):
            Snapshot.create(self.apiclient, volume_id=volume.id)

        return
예제 #31
0
    def test_01_test_vm_volume_snapshot(self):
        """
        @Desc: Test that Volume snapshot for root volume is not allowed
        when VM snapshot is present for the VM
        @Steps:
        1: Deploy a VM and create a VM snapshot for VM
        2: Try to create snapshot for the root volume of the VM,
        It should expect Exception
        """

        # Creating Virtual Machine
        virtual_machine = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
        )

        VmSnapshot.create(
            self.apiclient,
            virtual_machine.id,
        )

        volumes = Volume.list(self.apiclient,
                              virtualmachineid=virtual_machine.id,
                              type="ROOT",
                              listall=True)

        self.assertEqual(validateList(volumes)[0], PASS,
                "Failed to get root volume of the VM")

        volume = volumes[0]

        with self.assertRaises(Exception):
            Snapshot.create(self.apiclient,
                            volume_id=volume.id)

        return
    def test_04_template_from_snapshot(self):
        """Create Template from snapshot
        """

        # Validate the following
        # 2. Snapshot the Root disk
        # 3. Create Template from snapshot
        # 4. Deploy Virtual machine using this template
        # 5. VM should be in running state

        userapiclient = self.testClient.getUserApiClient(UserName=self.account.name, DomainName=self.account.domain)

        volumes = Volume.list(userapiclient, virtualmachineid=self.virtual_machine.id, type="ROOT", listall=True)
        volume = volumes[0]

        self.debug("Creating a snapshot from volume: %s" % volume.id)
        # Create a snapshot of volume
        snapshot = Snapshot.create(userapiclient, volume.id, account=self.account.name, domainid=self.account.domainid)
        self.debug("Creating a template from snapshot: %s" % snapshot.id)
        # Generate template from the snapshot
        template = Template.create_from_snapshot(userapiclient, snapshot, self.services["template"])
        self.cleanup.append(template)
        # Verify created template
        templates = Template.list(
            userapiclient, templatefilter=self.services["template"]["templatefilter"], id=template.id
        )
        self.assertNotEqual(templates, None, "Check if result exists in list item call")

        self.assertEqual(templates[0].id, template.id, "Check new template id in list resources call")
        self.debug("Deploying a VM from template: %s" % template.id)
        # Deploy new virtual machine using template
        virtual_machine = VirtualMachine.create(
            userapiclient,
            self.services["virtual_machine"],
            templateid=template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
        )
        self.cleanup.append(virtual_machine)

        vm_response = VirtualMachine.list(
            userapiclient, id=virtual_machine.id, account=self.account.name, domainid=self.account.domainid
        )
        self.assertEqual(isinstance(vm_response, list), True, "Check for list VM response return valid list")

        # Verify VM response to check whether VM deployment was successful
        self.assertNotEqual(len(vm_response), 0, "Check VMs available in List VMs response")
        vm = vm_response[0]
        self.assertEqual(vm.state, "Running", "Check the state of VM created from Template")
        return
예제 #33
0
    def test_07_snapshot_to_volume(self):
        ''' Create volume from snapshot
        '''
        snapshot = Snapshot.create(
            self.apiclient,
            volume_id = self.volume_2.id,
            account=self.account.name,
            domainid=self.account.domainid,
            )

        try:
            cmd = getVolumeSnapshotDetails.getVolumeSnapshotDetailsCmd()
            cmd.snapshotid = snapshot.id
            snapshot_details = self.apiclient.getVolumeSnapshotDetails(cmd)
            flag = False
            for s in snapshot_details:
                if s["snapshotDetailsName"] == snapshot.id:
                    name = s["snapshotDetailsValue"].split("/")[3]
                    sp_snapshot = self.spapi.snapshotList(snapshotName = "~" + name)
                    self.debug('################ %s' % sp_snapshot)
                    flag = True
            if flag == False:
                raise Exception("Could not find snapshot in snapshot details")
        except spapi.ApiError as err:
           raise Exception(err)

        self.assertIsNotNone(snapshot, "Could not create snapshot")
        self.assertIsInstance(snapshot, Snapshot, "Snapshot is not an instance of Snapshot")

        volume = self.helper.create_custom_disk(
            self.apiclient,
            {"diskname":"StorPoolDisk" },
            account=self.account.name,
            domainid=self.account.domainid,
            zoneid = self.zone.id,
            snapshotid = snapshot.id
            )

        listvol = Volume.list(
            self.apiclient,
            id=volume.id,
            listall= True
            )
        name = listvol[0].path.split("/")[3]
        try:
            spvolume = self.spapi.volumeList(volumeName="~" + name)
        except spapi.ApiError as err:
           raise Exception(err)

        self.assertIsNotNone(volume, "Could not create volume from snapshot")
        self.assertIsInstance(volume, Volume, "Volume is not instance of Volume")
예제 #34
0
    def test_02_check_size_snapshotTemplate(self):
        """TS_BUG_010-Test check size of snapshot and template
        """

        # Validate the following
        # 1. Deploy VM using default template, small service offering
        #    and small data disk offering.
        # 2. Perform snapshot on the root disk of this VM.
        # 3. Create a template from snapshot.
        # 4. Check the size of snapshot and template

        # Create a snapshot from the ROOTDISK
        snapshot = Snapshot.create(self.apiclient,
                                   self.volume.id,
                                   account=self.account.name,
                                   domainid=self.account.domainid)
        self.debug("Created snapshot with ID: %s" % snapshot.id)
        snapshots = Snapshot.list(self.apiclient, id=snapshot.id)
        self.assertEqual(isinstance(snapshots, list), True,
                         "Check list response returns a valid list")
        self.assertNotEqual(snapshots, None,
                            "Check if result exists in list snapshots call")
        self.assertEqual(snapshots[0].id, snapshot.id,
                         "Check snapshot id in list resources call")

        # Generate template from the snapshot
        template = Template.create_from_snapshot(self.apiclient, snapshot,
                                                 self.services["template"])
        self.cleanup.append(template)

        self.debug("Created template from snapshot with ID: %s" % template.id)
        templates = Template.list(
                                self.apiclient,
                                templatefilter=\
                                self.services["template"]["templatefilter"],
                                id=template.id
                                )
        self.assertEqual(isinstance(templates, list), True,
                         "Check list response returns a valid list")
        self.assertNotEqual(templates, None,
                            "Check if result exists in list item call")

        self.assertEqual(templates[0].isready, True,
                         "Check new template state in list templates call")
        # check size of template with that of snapshot
        self.assertEqual(
            templates[0].size, self.volume.size,
            "Derived template size (%s) does not match snapshot size (%s)" %
            (templates[0].size, self.volume.size))
        return
예제 #35
0
def createSnapshotFromVirtualMachineVolume(apiclient, account, vmid):
    """Create snapshot from volume"""

    try:
        volumes = Volume.list(apiclient, account=account.name, domainid=account.domainid, virtualmachineid=vmid)
        validationresult = validateList(volumes)
        assert validateList(volumes)[0] == PASS, "List volumes should return a valid response"
        snapshot = Snapshot.create(apiclient, volume_id=volumes[0].id, account=account.name, domainid=account.domainid)
        snapshots = Snapshot.list(apiclient, id=snapshot.id, listall=True)
        validationresult = validateList(snapshots)
        assert validationresult[0] == PASS, "List snapshot should return a valid list"
    except Exception as e:
        return [FAIL, e]
    return [PASS, snapshot]
예제 #36
0
    def tearDown(self):
        try:
            root_volume = list_volumes(self.apiclient,
                                       virtualmachineid=self.vm_1.id,
                                       type='ROOT',
                                       listall=True)

            self.vm_1.stop(self.apiclient)
            snaps = []
            for i in range(2):

                root_vol_snap = Snapshot.create(self.apiclient,
                                                root_volume[0].id)

                self.assertEqual(
                    root_vol_snap.state, "BackedUp",
                    "Check if the data vol snapshot state is correct ")

                snaps.append(root_vol_snap)

            for snap in snaps:

                self.assertNotEqual(
                    self.dbclient.execute(
                        "select status from snapshots where name='%s'" %
                        snap.name), "Destroyed")

            for snap in snaps:
                self.assertTrue(
                    is_snapshot_on_nfs(self.apiclient, self.dbclient,
                                       self.config, self.zone.id, snap.id))

            self.account.delete(self.apiclient)

            for snap in snaps:
                self.assertEqual(
                    self.dbclient.execute(
                        "select status from snapshots where name='%s'" %
                        snap.name)[0][0], "Destroyed")

            for snap in snaps:
                self.assertFalse(
                    is_snapshot_on_nfs(self.apiclient, self.dbclient,
                                       self.config, self.zone.id, snap.id))

            cleanup_resources(self.apiclient, self.cleanup)
        except Exception as e:
            raise Exception("Warning: Exception during cleanup : %s" % e)
        return
    def test_01_snapshot_data_disk(self):
        """Test Snapshot Data Disk
        """

        volume = list_volumes(
            self.apiclient,
            virtualmachineid=self.virtual_machine_with_disk.id,
            type='DATADISK',
            listall=True
        )
        self.assertEqual(
            isinstance(volume, list),
            True,
            "Check list response returns a valid list"
        )

        self.debug("Creating a Snapshot from data volume: %s" % volume[0].id)
        snapshot = Snapshot.create(
            self.apiclient,
            volume[0].id,
            account=self.account.name,
            domainid=self.account.domainid,
            asyncbackup=True
        )
        snapshots = list_snapshots(
            self.apiclient,
            id=snapshot.id
        )
        self.assertEqual(
            isinstance(snapshots, list),
            True,
            "Check list response returns a valid list"
        )
        self.assertNotEqual(
            snapshots,
            None,
            "Check if result exists in list item call"
        )
        self.assertEqual(
            snapshots[0].id,
            snapshot.id,
            "Check resource id in list resources call"
        )
        self.assertEqual(
            snapshot.state,
            "BackingUp",
            "Check resource state in list resources call"
        )
        return
예제 #38
0
    def test_13_snapshot_to_volume_from_secondary(self):
        ''' Try to create volume from snapshot which is deleted from primary and exists on secondary storage
        '''
        virtual_machine = VirtualMachine.create(self.apiclient,
            {"name":"StorPool-%s" % uuid.uuid4() },
            zoneid=self.zone.id,
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            hypervisor=self.hypervisor,
            rootdisksize=10
            )
        volume1 = list_volumes(
            self.apiclient,
            virtualmachineid = self.virtual_machine.id,
            type = "ROOT",
            listall = True
            )

        Configurations.update(self.apiclient,
            name = "sp.bypass.secondary.storage",
            value = "false")

        snapshot = Snapshot.create(
            self.apiclient,
            volume_id = volume1[0].id,
            account=self.account.name,
            domainid=self.account.domainid,
            )

        snapshot_name = self.getSnapshotName(snapshot)
        self.spapi.snapshotDelete(snapshotName = snapshot_name)


        self.assertIsNotNone(snapshot, "Could not create snapshot")
        self.assertIsInstance(snapshot, Snapshot, "Snapshot is not an instance of Snapshot")

        volume = self.helper.create_custom_disk(
            self.apiclient,
            {"diskname":"StorPoolDisk" },
            account=self.account.name,
            domainid=self.account.domainid,
            zoneid = self.zone.id,
            snapshotid = snapshot.id
            )

        self.assertIsNotNone(volume, "Could not create volume from snapshot")
        self.assertIsInstance(volume, Volume, "Volume is not instance of Volume")
    def test_23_template_from_snapshot_glid_on_secondary(self):

        volume = list_volumes(self.apiclient, virtualmachineid = self.virtual_machine6.id, type = "ROOT")

        self.helper.bypass_secondary(False)
        snapshot = Snapshot.create(self.apiclient, volume_id = volume[0].id,)

        self.helper.storpool_snapshot_globalid(snapshot)

        template = self.helper.create_template_from_snapshot_or_volume(services = self.services, snapshotid = snapshot.id)

        self.helper.create_vm_from_template(template)

        self._cleanup.append(template)
        self._cleanup.append(snapshot)
예제 #40
0
def CreateSnapshot(self, root_volume, is_recurring):
    """Create Snapshot"""
    if is_recurring:
        self.testdata["recurring_snapshot"]["intervaltype"] = 'HOURLY'
        self.testdata["recurring_snapshot"]["schedule"] = 1

        recurring_snapshot = SnapshotPolicy.create(
            self.apiclient, root_volume.id,
            self.testdata["recurring_snapshot"])
        self.rec_policy_pool.append(recurring_snapshot)
    else:
        root_vol_snapshot = Snapshot.create(self.apiclient, root_volume.id)

        self.snapshot_pool.append(root_vol_snapshot)

    return
예제 #41
0
    def test_05_snapshot_events(self):
        """Test snapshot events
        """
        # Validate the following
        # 1. Perform snapshot on the root disk of this VM and
        #    check the events/alerts.
        # 2. delete the snapshots and check the events/alerts
        # 3. listEvents() shows created/deleted snapshot events

        if self.hypervisor.lower() in ['hyperv']:
            self.skipTest("Snapshots feature is not supported on Hyper-V")

        # Get the Root disk of VM
        volumes = list_volumes(self.apiclient,
                               virtualmachineid=self.virtual_machine.id,
                               type='ROOT',
                               listall=True)
        self.assertEqual(isinstance(volumes, list), True,
                         "Check list response returns a valid list")
        volume = volumes[0]

        # Create a snapshot from the ROOTDISK
        snapshot = Snapshot.create(self.apiclient, volume.id)
        self.debug("Snapshot created with ID: %s" % snapshot.id)

        snapshots = list_snapshots(self.apiclient, id=snapshot.id)
        self.assertEqual(isinstance(snapshots, list), True,
                         "Check list response returns a valid list")
        self.assertNotEqual(snapshots, None,
                            "Check if result exists in list snapshots call")
        self.assertEqual(snapshots[0].id, snapshot.id,
                         "Check snapshot id in list resources call")
        snapshot.delete(self.apiclient)

        # Sleep to ensure that snapshot is deleted properly
        time.sleep(self.services["sleep"])
        events = list_events(self.apiclient,
                             account=self.account.name,
                             domainid=self.account.domainid,
                             type='SNAPSHOT.DELETE')
        self.assertEqual(isinstance(events, list), True,
                         "Check list response returns a valid list")
        self.assertNotEqual(events, None,
                            "Check if event exists in list events call")
        self.assertIn(events[0].state, ['Completed', 'Scheduled'],
                      "Check events state in list events call")
        return
def CreateSnapshot(self, root_volume, is_recurring):
    """Create Snapshot"""
    if is_recurring:
        self.testdata["recurring_snapshot"]["intervaltype"] = 'HOURLY'
        self.testdata["recurring_snapshot"]["schedule"] = 1

        recurring_snapshot = SnapshotPolicy.create(
            self.apiclient,
            root_volume.id,
            self.testdata["recurring_snapshot"]
        )
        self.rec_policy_pool.append(recurring_snapshot)
    else:
        root_vol_snapshot = Snapshot.create(
            self.apiclient,
            root_volume.id)

        self.snapshot_pool.append(root_vol_snapshot)

    return
예제 #43
0
    def test_06_create_snapshots_in_project(self):
        """Test create snapshots in project
        """
        # Validate the following
        # 1. Create a project
        # 2. Add some snapshots to the project
        # 3. Verify snapshot created inside project can only be used in inside
        #    the project

        self.debug("Deploying VM for Project: %s" % self.project.id)
        virtual_machine_1 = VirtualMachine.create(
            self.apiclient,
            self.services["server"],
            templateid=self.template.id,
            serviceofferingid=self.service_offering.id,
            projectid=self.project.id,
        )
        self.cleanup.append(virtual_machine_1)
        # Verify VM state
        self.assertEqual(virtual_machine_1.state, "Running", "Check VM state is Running or not")

        # Get the Root disk of VM
        volumes = list_volumes(self.apiclient, projectid=self.project.id, type="ROOT", listall=True)
        self.assertEqual(isinstance(volumes, list), True, "Check for list volume response return valid data")

        self.debug("Creating snapshot from volume: %s" % volumes[0].id)
        # Create a snapshot from the ROOTDISK
        snapshot = Snapshot.create(self.apiclient, volumes[0].id, projectid=self.project.id)
        self.cleanup.append(snapshot)
        # Verify Snapshot state
        self.assertEqual(
            snapshot.state in ["BackedUp", "CreatedOnPrimary", "Allocated"],
            True,
            "Check Snapshot state is in one of the mentioned possible states, \
                                    It is currently: %s"
            % snapshot.state,
        )

        snapshots = Snapshot.list(self.apiclient, account=self.account.name, domainid=self.account.domainid)
        self.assertEqual(snapshots, None, "Snapshots should not be available outside the project")
        return
예제 #44
0
 def create_vm(self,
               account,
               domain,
               isRunning=False,
               project  =None,
               limit    =None,
               pfrule   =False,
               lbrule   =None,
               natrule  =None,
               volume   =None,
               snapshot =False):
     #TODO: Implemnt pfrule/lbrule/natrule
     self.debug("Deploying instance in the account: %s" % account.name)
     self.virtual_machine = VirtualMachine.create(self.apiclient,
                                                  self.services["virtual_machine"],
                                                  accountid=account.name,
                                                  domainid=domain.id,
                                                  serviceofferingid=self.service_offering.id,
                                                  mode=self.zone.networktype if pfrule else 'basic',
                                                  projectid=project.id if project else None)
     self.debug("Deployed instance in account: %s" % account.name)
     list_virtual_machines(self.apiclient,
                           id=self.virtual_machine.id)
     if snapshot:
        volumes = list_volumes(self.apiclient,
                               virtualmachineid=self.virtual_machine.id,
                               type='ROOT',
                               listall=True)
        self.snapshot = Snapshot.create(self.apiclient,
                                   volumes[0].id,
                                   account=account.name,
                                   domainid=account.domainid)
     if volume:
         self.virtual_machine.attach_volume(self.apiclient,
                                            volume)
     if not isRunning:
         self.virtual_machine.stop(self.apiclient)
     self.cleanup.append(self.virtual_machine)
예제 #45
0
    def test_01_verify_events_table(self):
        """ Test events table

        # 1. Deploy a VM.
        # 2. Take VM snapshot.
        # 3. Verify that events table records UUID of the volume in descrption
            instead of volume ID
        """
        # Step 1
        # Create VM
        vm = VirtualMachine.create(
            self.userapiclient,
            self.testdata["small"],
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
        )
        volumes_list = list_volumes(
            self.apiclient,
            virtualmachineid=vm.id,
            type='ROOT',
            listall=True
        )

        volume_list_validation = validateList(volumes_list)
        self.assertEqual(
            volume_list_validation[0],
            PASS,
            "volume list validation failed due to %s" %
            volume_list_validation[2]
        )
        root_volume = volumes_list[0]

        # Step 2
        # Create snapshot of root volume
        snapshot = Snapshot.create(
            self.apiclient,
            root_volume.id)

        snapshots_list = Snapshot.list(self.userapiclient,
                                        id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], PASS, "Snapshots List Validation Failed")

        self.assertEqual(
            snapshot.state,
            "BackedUp",
            "Check if snapshot gets created properly"
        )

        # Step 3
        qresultset = self.dbclient.execute(
            "select  description from event where type='SNAPSHOT.CREATE' AND \
                        description like '%%%s%%'" % root_volume.id)

        event_validation_result = validateList(qresultset)

        self.assertEqual(
            event_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            event_validation_result[2]
        )

        self.assertNotEqual(
            len(qresultset),
            0,
            "Check if events table records UUID of the volume"
        )

        return
    def test_01_storage_snapshots_limits(self):
        """ Storage and Snapshot Limit
            1.   Create Snapshot of ROOT disk.
            2.   Verify the Secondary Storage value
                 is increased by the size of snapshot.
            3.   Delete Snaphshot.
            4.   Verify the Secondary
                 Storage value is decreased by the size of snapshot.
            5.   Set the Snapshot limit of Account.
            6.   Create Snasphots till limit is reached.
            7.   Create Snapshot of ROOT Volume.
                 Creation should fail.
            8.   Delete few Snapshots.
            9.   Create Snapshot again.
                 Creation should succeed.
        """

        # Get ROOT Volume
        root_volumes_list = Volume.list(
            self.userapiclient,
            virtualmachineid=self.vm.id,
            type='ROOT'
        )

        status = validateList(root_volumes_list)
        self.assertEqual(status[0], PASS, "ROOT Volume List Validation Failed")

        root_volume = root_volumes_list[0]

        self.data_volume_created = Volume.create(
            self.userapiclient,
            self.testdata["volume"],
            zoneid=self.zone.id,
            account=self.account.name,
            domainid=self.account.domainid,
            diskofferingid=self.disk_offering.id
        )

        self.cleanup.append(self.data_volume_created)

        data_volumes_list = Volume.list(
            self.userapiclient,
            id=self.data_volume_created.id
        )

        status = validateList(data_volumes_list)
        self.assertEqual(status[0], PASS, "DATA Volume List Validation Failed")

        self.data_volume = data_volumes_list[0]

        self.vm.attach_volume(
            self.userapiclient,
            self.data_volume
        )

        # Get Secondary Storage Value from Database
        qryresult_before_snapshot = self.dbclient.execute(
            " select id, account_name, secondaryStorageTotal\
                    from account_view where account_name = '%s';" %
            self.account.name)

        status = validateList(qryresult_before_snapshot)
        self.assertEqual(
            status[0],
            PASS,
            "Check sql query to return SecondaryStorageTotal of account")

        secStorageBeforeSnapshot = qryresult_before_snapshot[0][2]

        # Step 1
        snapshot = Snapshot.create(
            self.userapiclient,
            root_volume.id)

        snapshots_list = Snapshot.list(self.userapiclient,
                                       id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], PASS, "Snapshots List Validation Failed")

        # Verify Snapshot state
        self.assertEqual(
            snapshots_list[0].state.lower() in [
                BACKED_UP,
            ],
            True,
            "Snapshot state is not as expected. It is %s" %
            snapshots_list[0].state
        )

        # Step 2
        qryresult_after_snapshot = self.dbclient.execute(
            " select id, account_name, secondaryStorageTotal\
                        from account_view where account_name = '%s';" %
            self.account.name)

        status = validateList(qryresult_after_snapshot)
        self.assertEqual(
            status[0],
            PASS,
            "Check sql query to return SecondaryStorageTotal of account")

        secStorageAfterSnapshotCreated = qryresult_after_snapshot[0][2]

        snapshot_size = snapshots_list[0].physicalsize
        secStorageIncreased = secStorageBeforeSnapshot + \
            snapshot_size

        self.assertEqual(
            secStorageIncreased,
            secStorageAfterSnapshotCreated,
            "Secondary storage Total after Snapshot\
                        should be incremented by size of snapshot.")

        # Step 3
        snapshot.delete(self.apiclient)

        snapshots_list = Snapshot.list(self.userapiclient,
                                       id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], FAIL, "Snapshots Not Deleted.")

        # Step 4
        qryresult_after_snapshot_deleted = self.dbclient.execute(
            " select id, account_name, secondaryStorageTotal\
                        from account_view where account_name = '%s';" %
            self.account.name)

        status = validateList(qryresult_after_snapshot_deleted)
        self.assertEqual(
            status[0],
            PASS,
            "Check sql query to return SecondaryStorageTotal of account")

        secStorageAfterSnapshotDeleted = qryresult_after_snapshot_deleted[0][2]

        secStorageDecreased = secStorageAfterSnapshotCreated - \
            snapshot_size

        self.assertEqual(
            secStorageDecreased,
            secStorageAfterSnapshotDeleted,
            "Secondary storage Total after Snapshot\
                        should be incremented by size of snapshot.")

        # Step 5
        # Set Snapshot Limit for account
        Resources.updateLimit(self.apiclient, resourcetype=3,
                              max=1, account=self.account.name,
                              domainid=self.account.domainid)

        # Step 6
        snapshot = Snapshot.create(
            self.userapiclient,
            root_volume.id)

        snapshots_list = Snapshot.list(self.userapiclient,
                                       id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], PASS, "Snapshots List Validation Failed")

        # Verify Snapshot state
        self.assertEqual(
            snapshots_list[0].state.lower() in [
                BACKED_UP,
            ],
            True,
            "Snapshot state is not as expected. It is %s" %
            snapshots_list[0].state
        )

        # Step 7
        with self.assertRaises(Exception):
            Snapshot.create(
                self.userapiclient,
                self.data_volume.id)

        # Step 8
        snapshot.delete(self.userapiclient)

        snapshots_list = Snapshot.list(self.userapiclient,
                                       id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], FAIL, "Snapshots Not Deleted.")

        # Step 9
        snapshot = Snapshot.create(
            self.userapiclient,
            root_volume.id)

        snapshots_list = Snapshot.list(self.userapiclient,
                                       id=snapshot.id)

        status = validateList(snapshots_list)
        self.assertEqual(status[0], PASS, "Snapshots List Validation Failed")

        # Verify Snapshot state
        self.assertEqual(
            snapshots_list[0].state.lower() in [
                BACKED_UP,
            ],
            True,
            "Snapshot state is not as expected. It is %s" %
            snapshots_list[0].state
        )

        return
    def tearDown(self):
        try:
            root_volume = list_volumes(
                    self.apiclient,
                    virtualmachineid=self.vm_1.id,
                    type='ROOT',
                    listall=True
                    )

            self.vm_1.stop(self.apiclient)
            snaps = []
            for i in range(2):

                root_vol_snap = Snapshot.create(
                    self.apiclient,
                    root_volume[0].id)

               
                self.assertEqual(
                    root_vol_snap.state,
                    "BackedUp",
                    "Check if the data vol snapshot state is correct "
                )

                snaps.append(root_vol_snap)

            for snap in snaps:

                self.assertNotEqual(
                        self.dbclient.execute(
                            "select status from snapshots where name='%s'" %
                            snap.name),
                        "Destroyed"
                        )

            for snap in snaps:
                self.assertTrue(
                       is_snapshot_on_nfs(
                           self.apiclient,
                           self.dbclient,
                           self.config,
                           self.zone.id,
                           snap.id))
            
            self.account.delete(self.apiclient)

            for snap in snaps:
                self.assertEqual(
                        self.dbclient.execute(
                            "select status from snapshots where name='%s'" %
                            snap.name)[0][0],
                        "Destroyed"
                        )

            for snap in snaps:
                self.assertFalse(
                       is_snapshot_on_nfs(
                           self.apiclient,
                           self.dbclient,
                           self.config,
                           self.zone.id,
                           snap.id))

            cleanup_resources(self.apiclient, self.cleanup)
        except Exception as e:
            raise Exception("Warning: Exception during cleanup : %s" % e)
        return
예제 #48
0
    def test_03_reuse_template_name(self):
        """TS_BUG_011-Test Reusing deleted template name
        """


        # Validate the following
        # 1. Deploy VM using default template, small service offering
        #    and small data disk offering.
        # 2. Perform snapshot on the root disk of this VM.
        # 3. Create a template from snapshot.
        # 4. Delete the template and create a new template with same name
        # 5. Template should be created succesfully

        # Create a snapshot from the ROOTDISK
        snapshot = Snapshot.create(
                                   self.apiclient,
                                   self.volume.id,
                                   account=self.account.name,
                                   domainid=self.account.domainid
                                   )
        self.debug("Created snapshot with ID: %s" % snapshot.id)
        snapshots = Snapshot.list(
                                   self.apiclient,
                                   id=snapshot.id
                                   )
        self.assertEqual(
                            isinstance(snapshots, list),
                            True,
                            "Check list response returns a valid list"
                        )
        self.assertNotEqual(
                            snapshots,
                            None,
                            "Check if result exists in list snapshots call"
                            )
        self.assertEqual(
                            snapshots[0].id,
                            snapshot.id,
                            "Check snapshot id in list resources call"
                        )

        # Generate template from the snapshot
        template = Template.create_from_snapshot(
                                    self.apiclient,
                                    snapshot,
                                    self.services["template"],
                                    random_name=False
                                    )
        self.debug("Created template from snapshot: %s" % template.id)
        templates = Template.list(
                                self.apiclient,
                                templatefilter=\
                                self.services["template"]["templatefilter"],
                                id=template.id
                                )
        self.assertEqual(
                            isinstance(templates, list),
                            True,
                            "Check list response returns a valid list"
                        )
        self.assertNotEqual(
                            templates,
                            None,
                            "Check if result exists in list item call"
                            )

        self.assertEqual(
                            templates[0].isready,
                            True,
                            "Check new template state in list templates call"
                        )

        self.debug("Deleting template: %s" % template.id)
        template.delete(self.apiclient)

        # Wait for some time to ensure template state is reflected in other calls
        time.sleep(self.services["sleep"])

        # Generate template from the snapshot
        self.debug("Creating template from snapshot: %s with same name" %
                                                                template.id)
        template = Template.create_from_snapshot(
                                    self.apiclient,
                                    snapshot,
                                    self.services["template"],
                                    random_name=False
                                    )

        templates = Template.list(
                                self.apiclient,
                                templatefilter=\
                                self.services["template"]["templatefilter"],
                                id=template.id
                                )
        self.assertEqual(
                            isinstance(templates, list),
                            True,
                            "Check list response returns a valid list"
                        )
        self.assertNotEqual(
                            templates,
                            None,
                            "Check if result exists in list item call"
                            )

        self.assertEqual(
                            templates[0].name,
                            self.services["template"]["name"],
                            "Check the name of the template"
                        )
        return
예제 #49
0
    def test_02_check_size_snapshotTemplate(self):
        """TS_BUG_010-Test check size of snapshot and template
        """


        # Validate the following
        # 1. Deploy VM using default template, small service offering
        #    and small data disk offering.
        # 2. Perform snapshot on the root disk of this VM.
        # 3. Create a template from snapshot.
        # 4. Check the size of snapshot and template

        # Create a snapshot from the ROOTDISK
        snapshot = Snapshot.create(
                                   self.apiclient,
                                   self.volume.id,
                                   account=self.account.name,
                                   domainid=self.account.domainid
                                   )
        self.debug("Created snapshot with ID: %s" % snapshot.id)
        snapshots = Snapshot.list(
                                   self.apiclient,
                                   id=snapshot.id
                                   )
        self.assertEqual(
                            isinstance(snapshots, list),
                            True,
                            "Check list response returns a valid list"
                        )
        self.assertNotEqual(
                            snapshots,
                            None,
                            "Check if result exists in list snapshots call"
                            )
        self.assertEqual(
                            snapshots[0].id,
                            snapshot.id,
                            "Check snapshot id in list resources call"
                        )

        # Generate template from the snapshot
        template = Template.create_from_snapshot(
                                    self.apiclient,
                                    snapshot,
                                    self.services["template"]
                                    )
        self.cleanup.append(template)

        self.debug("Created template from snapshot with ID: %s" % template.id)
        templates = Template.list(
                                self.apiclient,
                                templatefilter=\
                                self.services["template"]["templatefilter"],
                                id=template.id
                                )
        self.assertEqual(
                            isinstance(templates, list),
                            True,
                            "Check list response returns a valid list"
                        )
        self.assertNotEqual(
                            templates,
                            None,
                            "Check if result exists in list item call"
                            )

        self.assertEqual(
                            templates[0].isready,
                            True,
                            "Check new template state in list templates call"
                        )
        # check size of template with that of snapshot
        self.assertEqual(
                            templates[0].size,
                            self.volume.size,
                            "Derived template size (%s) does not match snapshot size (%s)" % (templates[0].size, self.volume.size)
                        )
        return
 def test_02_list_volume_snapshots_byid(self):
     """
     @Desc: Test to List Volume Snapshots by Id
     @Steps:
     Step1: Listing all the volume snapshots for a user
     Step2: Verifying that list size is 0
     Step3: Creating a volume snapshot
     Step4: Listing all the volume snapshots again for a user
     Step5: Verifying that list size is 1
     Step6: Listing all the volume snapshots by specifying snapshot id
     Step7: Verifying that list size is 1
     Step8: Verifying details of the listed volume snapshot
     """
     if self.hypervisor.lower() in ['hyperv']:
         raise unittest.SkipTest("This feature is not supported on existing hypervisor. Hence, skipping the test")
     # Listing all the volume snapshots for a User
     list_vol_snaps_before = Snapshot.list(
                                           self.userapiclient,
                                           listall=self.services["listall"]
                                           )
     # Verifying list size is 0
     self.assertIsNone(
                       list_vol_snaps_before,
                       "Volume snapshots exists for newly created user"
                       )
     # Listing the root volumes available for the user
     volumes_list = Volume.list(
                                self.userapiclient,
                                listall=self.services["listall"]
                                )
     status = validateList(volumes_list)
     self.assertEquals(
                       PASS,
                       status[0],
                       "Root volume did not get created while deploying a VM"
                       )
     # Verifying list size to be 1
     self.assertEquals(
                       1,
                       len(volumes_list),
                       "More than 1 root volume created for deployed VM"
                       )
     root_volume = volumes_list[0]
     # Creating a volume snapshot
     snapshot_created = Snapshot.create(
                                        self.userapiclient,
                                        root_volume.id,
                                        )
     self.assertIsNotNone(
                          snapshot_created,
                          "Snapshot creation failed"
                          )
     self.cleanup.append(snapshot_created)
     # Listing all the volume snapshots for user again
     list_vol_snaps_after = Snapshot.list(
                                          self.userapiclient,
                                          listall=self.services["listall"]
                                          )
     status = validateList(list_vol_snaps_after)
     self.assertEquals(
                       PASS,
                       status[0],
                       "Volume snapshot creation failed"
                       )
     # Verifying that list size is 1
     self.assertEquals(
                       1,
                       len(list_vol_snaps_after),
                       "Failed to create Volume snapshot"
                       )
     # Listing volume snapshot by id
     list_vol_snapshot = Snapshot.list(
                                       self.userapiclient,
                                       listall=self.services["listall"],
                                       id=snapshot_created.id
                                       )
     status = validateList(list_vol_snapshot)
     self.assertEquals(
                       PASS,
                       status[0],
                       "Failed to list Volume snapshot by Id"
                       )
     # Verifying that list size is 1
     self.assertEquals(
                       1,
                       len(list_vol_snapshot),
                       "Size of the list volume snapshot by Id is not matching"
                       )
     # Verifying details of the listed snapshot to be same as snapshot created above
     # Creating expected and actual values dictionaries
     expected_dict = {
                      "id":snapshot_created.id,
                      "name":snapshot_created.name,
                      "state":snapshot_created.state,
                      "intervaltype":snapshot_created.intervaltype,
                      "account":snapshot_created.account,
                      "domain":snapshot_created.domainid,
                      "volume":snapshot_created.volumeid
                      }
     actual_dict = {
                    "id":list_vol_snapshot[0].id,
                    "name":list_vol_snapshot[0].name,
                    "state":list_vol_snapshot[0].state,
                    "intervaltype":list_vol_snapshot[0].intervaltype,
                    "account":list_vol_snapshot[0].account,
                    "domain":list_vol_snapshot[0].domainid,
                    "volume":list_vol_snapshot[0].volumeid
                    }
     vol_snapshot_status = self.__verify_values(
                                                expected_dict,
                                                actual_dict
                                                )
     self.assertEqual(
                      True,
                      vol_snapshot_status,
                      "Listed Volume Snapshot details are not as expected"
                      )
     return
    def test_01_list_volume_snapshots_pagination(self):
        """
        @Desc: Test to List Volume Snapshots pagination
        @steps:
        Step1: Listing all the volume snapshots for a user
        Step2: Verifying that list size is 0
        Step3: Creating (page size + 1) number of volume snapshots
        Step4: Listing all the volume snapshots again for a user
        Step5: Verifying that list size is (page size + 1)
        Step6: Listing all the volume snapshots in page1
        Step7: Verifying that list size is (page size)
        Step8: Listing all the volume snapshots in page2
        Step9: Verifying that list size is 1
        Step10: Deleting the volume snapshot present in page 2
        Step11: Listing all the volume snapshots in page2
        Step12: Verifying that list size is 0
        """
        if self.hypervisor.lower() in ['hyperv']:
            raise unittest.SkipTest("This feature is not supported on existing hypervisor. Hence, skipping the test")
        # Listing all the volume snapshots for a User
        list_vol_snaps_before = Snapshot.list(
                                              self.userapiclient,
                                              listall=self.services["listall"]
                                              )
        # Verifying list size is 0
        self.assertIsNone(
                          list_vol_snaps_before,
                          "Volume snapshots exists for newly created user"
                          )
        # Listing the root volumes available for the user
        volumes_list = Volume.list(
                                   self.userapiclient,
                                   listall=self.services["listall"]
                                   )
        status = validateList(volumes_list)
        self.assertEquals(
                          PASS,
                          status[0],
                          "Root volume did not get created while deploying a VM"
                          )
        # Verifying list size to be 1
        self.assertEquals(
                          1,
                          len(volumes_list),
                          "More than 1 root volume created for deployed VM"
                          )
        root_volume = volumes_list[0]
        # Creating pagesize + 1 number of volume snapshots
        for i in range(0, (self.services["pagesize"] + 1)):
            snapshot_created = Snapshot.create(
                                               self.userapiclient,
                                               root_volume.id,
                                               )
            self.assertIsNotNone(
                                 snapshot_created,
                                 "Snapshot creation failed"
                                 )
            self.cleanup.append(snapshot_created)

        # Listing all the volume snapshots for user again
        list_vol_snaps_after = Snapshot.list(
                                             self.userapiclient,
                                             listall=self.services["listall"]
                                             )
        status = validateList(list_vol_snaps_after)
        self.assertEquals(
                          PASS,
                          status[0],
                          "Volume snapshot creation failed"
                          )
        # Verifying that list size is pagesize + 1
        self.assertEquals(
                          self.services["pagesize"] + 1,
                          len(list_vol_snaps_after),
                          "Failed to create pagesize + 1 number of Volume snapshots"
                          )
        # Listing all the volume snapshots in page 1
        list_vol_snaps_page1 = Snapshot.list(
                                             self.userapiclient,
                                             listall=self.services["listall"],
                                             page=1,
                                             pagesize=self.services["pagesize"]
                                             )
        status = validateList(list_vol_snaps_page1)
        self.assertEquals(
                          PASS,
                          status[0],
                          "Failed to list volume snapshots in page 1"
                          )
        # Verifying the list size to be equal to pagesize
        self.assertEquals(
                          self.services["pagesize"],
                          len(list_vol_snaps_page1),
                          "Size of volume snapshots in page 1 is not matching"
                          )
        # Listing all the volume snapshots in page 2
        list_vol_snaps_page2 = Snapshot.list(
                                             self.userapiclient,
                                             listall=self.services["listall"],
                                             page=2,
                                             pagesize=self.services["pagesize"]
                                             )
        status = validateList(list_vol_snaps_page2)
        self.assertEquals(
                          PASS,
                          status[0],
                          "Failed to list volume snapshots in page 2"
                          )
        # Verifying the list size to be equal to pagesize
        self.assertEquals(
                          1,
                          len(list_vol_snaps_page2),
                          "Size of volume snapshots in page 2 is not matching"
                          )
        # Deleting the volume snapshot present in page 2
        Snapshot.delete(
                        snapshot_created,
                        self.userapiclient
                        )
        self.cleanup.remove(snapshot_created)
        # Listing all the snapshots in page 2 again
        list_vol_snaps_page2 = Snapshot.list(
                                             self.userapiclient,
                                             listall=self.services["listall"],
                                             page=2,
                                             pagesize=self.services["pagesize"]
                                             )
        # Verifying that list size is 0
        self.assertIsNone(
                          list_vol_snaps_page2,
                          "Volume snapshot not deleted from page 2"
                          )
        return
예제 #52
0
    def test_03_snapshot_detachedDisk(self):
        """Test snapshot from detached disk
        """
        # Validate the following
        # 1. login in VM  and write some data on data disk(use fdisk to
        #    partition datadisk,fdisk, and make filesystem using
        #    mkfs.ext3)
        # 2. Detach the data disk and write some data on data disk
        # 3. perform the snapshot on the detached volume
        # 4. listvolumes with VM id shouldn't show the detached volume
        # 5. listSnapshots should list the snapshot that was created
        # 6. verify backup_snap_id was non null in the `snapshots` table

        if self.hypervisor.lower() in ['hyperv']:
            self.skipTest("Snapshots feature is not supported on Hyper-V")

        volumes = list_volumes(
            self.apiclient,
            virtualmachineid=self.virtual_machine.id,
            type='DATADISK',
            listall=True
        )
        self.assertEqual(
            isinstance(volumes, list),
            True,
            "Check list response returns a valid list"
        )
        volume = volumes[0]
        random_data_0 = random_gen(size=100)
        random_data_1 = random_gen(size=100)
        try:
            ssh_client = self.virtual_machine.get_ssh_client()

            # Format partition using ext3
            format_volume_to_ext3(
                ssh_client,
                self.services["volume"][self.hypervisor]["datadiskdevice_1"]
            )
            cmds = [
                "mkdir -p %s" %
                self.services["paths"]["mount_dir"],
                "mount %s1 %s" %
                (self.services["volume"][
                    self.hypervisor]["datadiskdevice_1"],
                    self.services["paths"]["mount_dir"]),
                "pushd %s" %
                self.services["paths"]["mount_dir"],
                "mkdir -p %s/{%s,%s} " %
                (self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir1"],
                    self.services["paths"]["sub_lvl_dir2"]),
                "echo %s > %s/%s/%s" %
                (random_data_0,
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir1"],
                    self.services["paths"]["random_data"]),
                "echo %s > %s/%s/%s" %
                (random_data_1,
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir2"],
                    self.services["paths"]["random_data"]),
                "sync",
                "umount %s" %
                (self.services["paths"]["mount_dir"]),
            ]
            for c in cmds:
                self.debug(ssh_client.execute(c))

            # detach volume from VM
            cmd = detachVolume.detachVolumeCmd()
            cmd.id = volume.id
            self.apiclient.detachVolume(cmd)

            # Create snapshot from detached volume
            snapshot = Snapshot.create(self.apiclient, volume.id)

            volumes = list_volumes(
                self.apiclient,
                virtualmachineid=self.virtual_machine.id,
                type='DATADISK',
                listall=True
            )

            self.assertEqual(
                volumes,
                None,
                "Check Volume is detached"
            )

            # Verify the snapshot was created or not
            snapshots = list_snapshots(
                self.apiclient,
                id=snapshot.id
            )
            self.assertNotEqual(
                snapshots,
                None,
                "Check if result exists in list snapshots call"
            )
            self.assertEqual(
                snapshots[0].id,
                snapshot.id,
                "Check snapshot id in list resources call"
            )
        except Exception as e:
            self.fail("SSH failed for VM with IP: %s - %s" %
                      (self.virtual_machine.ssh_ip, e))

        qresultset = self.dbclient.execute(
            "select id from snapshots where uuid = '%s';"
            % snapshot.id
        )
        self.assertNotEqual(
            len(qresultset),
            0,
            "Check DB Query result set"
        )

        qresult = qresultset[0]
        self.assertNotEqual(
            str(qresult[0]),
            'NULL',
            "Check if backup_snap_id is not null"
        )
        return
    def test_01_create__snapshot_new_resized_rootvolume_size(self):
        """Test create snapshot on resized root volume

        # Validate the following

        # 1. Deploy a VM without any disk offering (only root disk)
        # 2. Perform(resize)  of the root  volume
        # 3. Perform snapshot on resized volume
        """

        # deploy a vm

        try:
            if self.updateclone:

                    self.virtual_machine = VirtualMachine.create(
                        self.apiclient, self.services["virtual_machine"],
                        accountid=self.parentd_admin.name,
                        domainid=self.parent_domain.id,
                        serviceofferingid=self.services_offering_vmware.id,
                        mode=self.zone.networktype
                    )
            else:
                    self.virtual_machine = VirtualMachine.create(
                        self.apiclient, self.services["virtual_machine"],
                        accountid=self.parentd_admin.name,
                        domainid=self.parent_domain.id,
                        serviceofferingid=self.service_offering.id,
                        mode=self.zone.networktype
                    )

            # listVirtual machine
            list_vms = VirtualMachine.list(self.apiclient,
                                           id=self.virtual_machine.id)

            self.debug(
                "Verify listVirtualMachines response for virtual machine: %s" %
                self.virtual_machine.id
            )
            res = validateList(list_vms)
            self.assertNotEqual(res[2], INVALID_INPUT, "Invalid list response")

            vm = list_vms[0]
            self.assertEqual(
                vm.id,
                self.virtual_machine.id,
                "Virtual Machine ids do not match"
            )
            self.assertEqual(
                vm.name,
                self.virtual_machine.name,
                "Virtual Machine names do not match"
            )
            self.assertEqual(
                vm.state,
                "Running",
                msg="VM is not in Running state"
            )
            result = self.chk_volume_resize(self.apiclient, vm)
            if result:
                # get root vol from created vm, verify it is correct size
                list_volume_response = Volume.list(
                    self.apiclient,
                    virtualmachineid=
                    self.virtual_machine.id,
                    type='ROOT',
                    listall='True'
                )
                res = validateList(list_volume_response)
                self.assertNotEqual(res[2], INVALID_INPUT, "listVolumes returned invalid object in response")
                rootvolume = list_volume_response[0]
                self.debug("Creating a Snapshot from root  volume: "
                           "%s" % rootvolume.id)
                snapshot = Snapshot.create(
                    self.apiclient,
                    rootvolume.id,
                    account=self.parentd_admin.name,
                    domainid=self.parent_domain.id
                )
                snapshots = list_snapshots(
                    self.apiclient,
                    id=snapshot.id
                )
                res = validateList(snapshots)
                self.assertNotEqual(res[2], INVALID_INPUT, "Invalid list response")
                self.assertEqual(
                    snapshots[0].id,
                    snapshot.id,
                    "Check resource id in list resources call"
                )
            else:
                self.debug("Volume resize is failed")

        except Exception as e:
            raise Exception("Exception while performing"
                            "  the snapshot on resized root volume"
                            " test case: %s" % e)

        self.cleanup.append(self.virtual_machine)
        self.cleanup.append(snapshot)

        return
    def test_02_host_maintenance_mode_with_activities(self):
        """Test host maintenance mode with activities
        """

        # Validate the following
        # 1. Create Vms. Acquire IP. Create port forwarding & load balancing
        #    rules for Vms.
        # 2. While activities are ongoing: Create snapshots, recurring
        #    snapshots, create templates, download volumes, Host 1: put to
        #    maintenance mode. All Vms should failover to Host 2 in cluster
        #    Vms should be in running state. All port forwarding rules and
        #    load balancing Rules should work.
        # 3. After failover to Host 2 succeeds, deploy Vms. Deploy Vms on host
        #    2 should succeed. All ongoing activities in step 3 should succeed
        # 4. Host 1: cancel maintenance mode.
        # 5. While activities are ongoing: Create snapshots, recurring
        #    snapshots, create templates, download volumes, Host 2: put to
        #    maintenance mode. All Vms should failover to Host 1 in cluster.
        # 6. After failover to Host 1 succeeds, deploy VMs. Deploy Vms on
        #    host 1 should succeed. All ongoing activities in step 6 should
        #    succeed.

        hosts = Host.list(
            self.apiclient,
            zoneid=self.zone.id,
            resourcestate='Enabled',
            type='Routing'
        )
        self.assertEqual(
            isinstance(hosts, list),
            True,
            "List hosts should return valid host response"
        )
        if len(hosts) < 2:
            self.skipTest("There must be at least 2 hosts present in cluster")

        self.debug("Checking HA with hosts: %s, %s" % (
            hosts[0].name,
            hosts[1].name
        ))
        self.debug("Deploying VM in account: %s" % self.account.name)
        # Spawn an instance in that network
        virtual_machine = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id
        )
        vms = VirtualMachine.list(
            self.apiclient,
            id=virtual_machine.id,
            listall=True
        )
        self.assertEqual(
            isinstance(vms, list),
            True,
            "List VMs should return valid response for deployed VM"
        )
        self.assertNotEqual(
            len(vms),
            0,
            "List VMs should return valid response for deployed VM"
        )
        vm = vms[0]
        self.debug("Deployed VM on host: %s" % vm.hostid)
        self.assertEqual(
            vm.state,
            "Running",
            "Deployed VM should be in RUnning state"
        )
        networks = Network.list(
            self.apiclient,
            account=self.account.name,
            domainid=self.account.domainid,
            listall=True
        )
        self.assertEqual(
            isinstance(networks, list),
            True,
            "List networks should return valid list for the account"
        )
        network = networks[0]

        self.debug("Associating public IP for account: %s" %
                   self.account.name)
        public_ip = PublicIPAddress.create(
            self.apiclient,
            accountid=self.account.name,
            zoneid=self.zone.id,
            domainid=self.account.domainid,
            networkid=network.id
        )

        self.debug("Associated %s with network %s" % (
            public_ip.ipaddress.ipaddress,
            network.id
        ))
        self.debug("Creating PF rule for IP address: %s" %
                   public_ip.ipaddress.ipaddress)
        NATRule.create(
            self.apiclient,
            virtual_machine,
            self.services["natrule"],
            ipaddressid=public_ip.ipaddress.id
        )

        self.debug("Creating LB rule on IP with NAT: %s" %
                   public_ip.ipaddress.ipaddress)

        # Create Load Balancer rule on IP already having NAT rule
        lb_rule = LoadBalancerRule.create(
            self.apiclient,
            self.services["lbrule"],
            ipaddressid=public_ip.ipaddress.id,
            accountid=self.account.name
        )
        self.debug("Created LB rule with ID: %s" % lb_rule.id)

        # Should be able to SSH VM
        try:
            self.debug("SSH into VM: %s" % virtual_machine.id)
            virtual_machine.get_ssh_client(
                ipaddress=public_ip.ipaddress.ipaddress)
        except Exception as e:
            self.fail("SSH Access failed for %s: %s" %
                      (virtual_machine.ipaddress, e)
                      )
        # Get the Root disk of VM
        volumes = list_volumes(
            self.apiclient,
            virtualmachineid=virtual_machine.id,
            type='ROOT',
            listall=True
        )
        volume = volumes[0]
        self.debug(
            "Root volume of VM(%s): %s" % (
                virtual_machine.name,
                volume.name
            ))
        # Create a snapshot from the ROOTDISK
        self.debug("Creating snapshot on ROOT volume: %s" % volume.name)
        snapshot = Snapshot.create(self.apiclient, volumes[0].id)
        self.debug("Snapshot created: ID - %s" % snapshot.id)

        snapshots = list_snapshots(
            self.apiclient,
            id=snapshot.id,
            listall=True
        )
        self.assertEqual(
            isinstance(snapshots, list),
            True,
            "Check list response returns a valid list"
        )
        self.assertNotEqual(
            snapshots,
            None,
            "Check if result exists in list snapshots call"
        )
        self.assertEqual(
            snapshots[0].id,
            snapshot.id,
            "Check snapshot id in list resources call"
        )

        # Generate template from the snapshot
        self.debug("Generating template from snapshot: %s" % snapshot.name)
        template = Template.create_from_snapshot(
            self.apiclient,
            snapshot,
            self.services["templates"]
        )
        self.debug("Created template from snapshot: %s" % template.id)

        templates = list_templates(
            self.apiclient,
            templatefilter=self.services["templates"]["templatefilter"],
            id=template.id
        )

        self.assertEqual(
            isinstance(templates, list),
            True,
            "List template call should return the newly created template"
        )

        self.assertEqual(
            templates[0].isready,
            True,
            "The newly created template should be in ready state"
        )

        first_host = vm.hostid
        self.debug("Enabling maintenance mode for host %s" % vm.hostid)
        cmd = prepareHostForMaintenance.prepareHostForMaintenanceCmd()
        cmd.id = first_host
        self.apiclient.prepareHostForMaintenance(cmd)

        self.debug("Waiting for SSVMs to come up")
        wait_for_ssvms(
            self.apiclient,
            zoneid=self.zone.id,
            podid=self.pod.id,
        )

        timeout = self.services["timeout"]
        # Poll and check state of VM while it migrates from one host to another
        while True:
            vms = VirtualMachine.list(
                self.apiclient,
                id=virtual_machine.id,
                listall=True
            )
            self.assertEqual(
                isinstance(vms, list),
                True,
                "List VMs should return valid response for deployed VM"
            )
            self.assertNotEqual(
                len(vms),
                0,
                "List VMs should return valid response for deployed VM"
            )
            vm = vms[0]

            self.debug("VM 1 state: %s" % vm.state)
            if vm.state in ["Stopping",
                            "Stopped",
                            "Running",
                            "Starting",
                            "Migrating"]:
                if vm.state == "Running":
                    break
                else:
                    time.sleep(self.services["sleep"])
                    timeout = timeout - 1
            else:
                self.fail(
                    "VM migration from one-host-to-other failed\
                            while enabling maintenance"
                )
        second_host = vm.hostid
        self.assertEqual(
            vm.state,
            "Running",
            "VM should be in Running state after enabling host maintenance"
        )
        # Should be able to SSH VM
        try:
            self.debug("SSH into VM: %s" % virtual_machine.id)
            virtual_machine.get_ssh_client(
                ipaddress=public_ip.ipaddress.ipaddress)
        except Exception as e:
            self.fail("SSH Access failed for %s: %s" %
                      (virtual_machine.ipaddress, e)
                      )
        self.debug("Deploying VM in account: %s" % self.account.name)
        # Spawn an instance on other host
        virtual_machine_2 = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id
        )
        vms = VirtualMachine.list(
            self.apiclient,
            id=virtual_machine_2.id,
            listall=True
        )
        self.assertEqual(
            isinstance(vms, list),
            True,
            "List VMs should return valid response for deployed VM"
        )
        self.assertNotEqual(
            len(vms),
            0,
            "List VMs should return valid response for deployed VM"
        )
        vm = vms[0]
        self.debug("Deployed VM on host: %s" % vm.hostid)
        self.debug("VM 2 state: %s" % vm.state)
        self.assertEqual(
            vm.state,
            "Running",
            "Deployed VM should be in Running state"
        )

        self.debug("Canceling host maintenance for ID: %s" % first_host)
        cmd = cancelHostMaintenance.cancelHostMaintenanceCmd()
        cmd.id = first_host
        self.apiclient.cancelHostMaintenance(cmd)
        self.debug("Maintenance mode canceled for host: %s" % first_host)

        # Get the Root disk of VM
        volumes = list_volumes(
            self.apiclient,
            virtualmachineid=virtual_machine_2.id,
            type='ROOT',
            listall=True
        )
        volume = volumes[0]
        self.debug(
            "Root volume of VM(%s): %s" % (
                virtual_machine_2.name,
                volume.name
            ))
        # Create a snapshot from the ROOTDISK
        self.debug("Creating snapshot on ROOT volume: %s" % volume.name)
        snapshot = Snapshot.create(self.apiclient, volumes[0].id)
        self.debug("Snapshot created: ID - %s" % snapshot.id)

        snapshots = list_snapshots(
            self.apiclient,
            id=snapshot.id,
            listall=True
        )
        self.assertEqual(
            isinstance(snapshots, list),
            True,
            "Check list response returns a valid list"
        )
        self.assertNotEqual(
            snapshots,
            None,
            "Check if result exists in list snapshots call"
        )
        self.assertEqual(
            snapshots[0].id,
            snapshot.id,
            "Check snapshot id in list resources call"
        )

        # Generate template from the snapshot
        self.debug("Generating template from snapshot: %s" % snapshot.name)
        template = Template.create_from_snapshot(
            self.apiclient,
            snapshot,
            self.services["templates"]
        )
        self.debug("Created template from snapshot: %s" % template.id)

        templates = list_templates(
            self.apiclient,
            templatefilter=self.services["templates"]["templatefilter"],
            id=template.id
        )

        self.assertEqual(
            isinstance(templates, list),
            True,
            "List template call should return the newly created template"
        )

        self.assertEqual(
            templates[0].isready,
            True,
            "The newly created template should be in ready state"
        )

        self.debug("Enabling maintenance mode for host %s" % second_host)
        cmd = prepareHostForMaintenance.prepareHostForMaintenanceCmd()
        cmd.id = second_host
        self.apiclient.prepareHostForMaintenance(cmd)
        self.debug("Maintenance mode enabled for host: %s" % second_host)

        self.debug("Waiting for SSVMs to come up")
        wait_for_ssvms(
            self.apiclient,
            zoneid=self.zone.id,
            podid=self.pod.id,
        )

        # Poll and check the status of VMs
        timeout = self.services["timeout"]
        while True:
            vms = VirtualMachine.list(
                self.apiclient,
                account=self.account.name,
                domainid=self.account.domainid,
                listall=True
            )
            self.assertEqual(
                isinstance(vms, list),
                True,
                "List VMs should return valid response for deployed VM"
            )
            self.assertNotEqual(
                len(vms),
                0,
                "List VMs should return valid response for deployed VM"
            )
            vm = vms[0]
            self.debug(
                "VM state after enabling maintenance on first host: %s" %
                vm.state)
            if vm.state in ["Stopping",
                            "Stopped",
                            "Running",
                            "Starting",
                            "Migrating"]:
                if vm.state == "Running":
                    break
                else:
                    time.sleep(self.services["sleep"])
                    timeout = timeout - 1
            else:
                self.fail(
                    "VM migration from one-host-to-other failed\
                            while enabling maintenance"
                )

        # Poll and check the status of VMs
        timeout = self.services["timeout"]
        while True:
            vms = VirtualMachine.list(
                self.apiclient,
                account=self.account.name,
                domainid=self.account.domainid,
                listall=True
            )
            self.assertEqual(
                isinstance(vms, list),
                True,
                "List VMs should return valid response for deployed VM"
            )
            self.assertNotEqual(
                len(vms),
                0,
                "List VMs should return valid response for deployed VM"
            )
            vm = vms[1]
            self.debug(
                "VM state after enabling maintenance on first host: %s" %
                vm.state)
            if vm.state in ["Stopping",
                            "Stopped",
                            "Running",
                            "Starting",
                            "Migrating"]:
                if vm.state == "Running":
                    break
                else:
                    time.sleep(self.services["sleep"])
                    timeout = timeout - 1
            else:
                self.fail(
                    "VM migration from one-host-to-other failed\
                            while enabling maintenance"
                )

        for vm in vms:
            self.debug(
                "VM states after enabling maintenance mode on host: %s - %s" %
                (first_host, vm.state))
            self.assertEqual(
                vm.state,
                "Running",
                "Deployed VM should be in Running state"
            )

        # Spawn an instance on other host
        virtual_machine_3 = VirtualMachine.create(
            self.apiclient,
            self.services["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id
        )
        vms = VirtualMachine.list(
            self.apiclient,
            id=virtual_machine_3.id,
            listall=True
        )
        self.assertEqual(
            isinstance(vms, list),
            True,
            "List VMs should return valid response for deployed VM"
        )
        self.assertNotEqual(
            len(vms),
            0,
            "List VMs should return valid response for deployed VM"
        )
        vm = vms[0]

        self.debug("Deployed VM on host: %s" % vm.hostid)
        self.debug("VM 3 state: %s" % vm.state)
        self.assertEqual(
            vm.state,
            "Running",
            "Deployed VM should be in Running state"
        )

        self.debug("Canceling host maintenance for ID: %s" % second_host)
        cmd = cancelHostMaintenance.cancelHostMaintenanceCmd()
        cmd.id = second_host
        self.apiclient.cancelHostMaintenance(cmd)
        self.debug("Maintenance mode canceled for host: %s" % second_host)

        self.debug("Waiting for SSVMs to come up")
        wait_for_ssvms(
            self.apiclient,
            zoneid=self.zone.id,
            podid=self.pod.id,
        )
        return
예제 #55
0
    def setUpClass(cls):
        cls.testClient = super(TestAccountSnapshotClean, cls).getClsTestClient()
        cls.api_client = cls.testClient.getApiClient()

        cls.services = Services().services
        # Get Zone, Domain and templates
        cls.domain = get_domain(cls.api_client)
        cls.zone = get_zone(cls.api_client, cls.testClient.getZoneForTests())
        cls.services['mode'] = cls.zone.networktype
        cls.hypervisor = cls.testClient.getHypervisorInfo()
        if cls.hypervisor.lower() in ['lxc']:
            raise unittest.SkipTest("snapshots are not supported on %s" % cls.hypervisor.lower())

        template = get_template(
                            cls.api_client,
                            cls.zone.id,
                            cls.services["ostype"]
                            )
        cls.services["server"]["zoneid"] = cls.zone.id

        cls.services["template"] = template.id
        cls._cleanup = []

        try:
            # Create VMs, NAT Rules etc
            cls.account = Account.create(
                                cls.api_client,
                                cls.services["account"],
                                domainid=cls.domain.id
                                )

            cls.services["account"] = cls.account.name

            if cls.zone.localstorageenabled:
                cls.services["service_offering"]["storagetype"] = "local"
            cls.service_offering = ServiceOffering.create(
                                                cls.api_client,
                                                cls.services["service_offering"]
                                                )

            cls.virtual_machine = VirtualMachine.create(
                                    cls.api_client,
                                    cls.services["server"],
                                    templateid=template.id,
                                    accountid=cls.account.name,
                                    domainid=cls.account.domainid,
                                    serviceofferingid=cls.service_offering.id
                                    )

            # Get the Root disk of VM
            volumes = list_volumes(
                                cls.api_client,
                                virtualmachineid=cls.virtual_machine.id,
                                type='ROOT',
                                listall=True
                                )
            volume = volumes[0]

            # Create a snapshot from the ROOTDISK
            cls.snapshot = Snapshot.create(cls.api_client, volume.id)
        except Exception, e:
            cls.tearDownClass()
            unittest.SkipTest("setupClass fails for %s" % cls.__name__)
            raise e
예제 #56
0
    def test_07_template_from_snapshot(self):
        """Create Template from snapshot
        """

        # 1. Login to machine; create temp/test directories on data volume
        # 2. Snapshot the Volume
        # 3. Create Template from snapshot
        # 4. Deploy Virtual machine using this template
        # 5. Login to newly created virtual machine
        # 6. Compare data in the root disk with the one that was written on the
        # volume, it should match

        if self.hypervisor.lower() in ['hyperv']:
            self.skipTest("Snapshots feature is not supported on Hyper-V")

        userapiclient = self.testClient.getUserApiClient(
            UserName=self.account.name,
            DomainName=self.account.domain)

        random_data_0 = random_gen(size=100)
        random_data_1 = random_gen(size=100)

        try:
            # Login to virtual machine
            ssh_client = self.virtual_machine.get_ssh_client()

            cmds = [
                "mkdir -p %s" % self.services["paths"]["mount_dir"],
                "mount %s1 %s" % (
                    self.services["volume"][self.hypervisor]["rootdiskdevice"],
                    self.services["paths"]["mount_dir"]
                ),
                "mkdir -p %s/%s/{%s,%s} " % (
                    self.services["paths"]["mount_dir"],
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir1"],
                    self.services["paths"]["sub_lvl_dir2"]
                ),
                "echo %s > %s/%s/%s/%s" % (
                    random_data_0,
                    self.services["paths"]["mount_dir"],
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir1"],
                    self.services["paths"]["random_data"]
                ),
                "echo %s > %s/%s/%s/%s" % (
                    random_data_1,
                    self.services["paths"]["mount_dir"],
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir2"],
                    self.services["paths"]["random_data"]
                ),
                "sync",
            ]

            for c in cmds:
                self.debug(c)
                result = ssh_client.execute(c)
                self.debug(result)

        except Exception as e:
            self.fail("SSH failed for VM with IP address: %s" %
                      self.virtual_machine.ipaddress)

        # Unmount the Volume
        cmds = [
            "umount %s" % (self.services["paths"]["mount_dir"]),
        ]
        for c in cmds:
            self.debug(c)
            ssh_client.execute(c)

        volumes = list_volumes(
            userapiclient,
            virtualmachineid=self.virtual_machine.id,
            type='ROOT',
            listall=True
        )
        self.assertEqual(
            isinstance(volumes, list),
            True,
            "Check list response returns a valid list"
        )

        volume = volumes[0]

        # Create a snapshot of volume
        snapshot = Snapshot.create(
            userapiclient,
            volume.id,
            account=self.account.name,
            domainid=self.account.domainid
        )

        self.debug("Snapshot created from volume ID: %s" % volume.id)
        # Generate template from the snapshot
        template = Template.create_from_snapshot(
            userapiclient,
            snapshot,
            self.services["templates"]
        )
        self.cleanup.append(template)
        self.debug("Template created from snapshot ID: %s" % snapshot.id)

        # Verify created template
        templates = list_templates(
            userapiclient,
            templatefilter=self.services["templates"]["templatefilter"],
            id=template.id
        )
        self.assertNotEqual(
            templates,
            None,
            "Check if result exists in list item call"
        )

        self.assertEqual(
            templates[0].id,
            template.id,
            "Check new template id in list resources call"
        )
        self.debug("Deploying new VM from template: %s" % template.id)

        # Deploy new virtual machine using template
        new_virtual_machine = VirtualMachine.create(
            userapiclient,
            self.services["server_without_disk"],
            templateid=template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            mode=self.services["mode"]
        )
        try:
            # Login to VM & mount directory
            ssh = new_virtual_machine.get_ssh_client()

            cmds = [
                "mkdir -p %s" % self.services["paths"]["mount_dir"],
                "mount %s1 %s" % (
                    self.services["volume"][self.hypervisor]["rootdiskdevice"],
                    self.services["paths"]["mount_dir"]
                )
            ]

            for c in cmds:
                ssh.execute(c)

            returned_data_0 = ssh.execute("cat %s/%s/%s/%s" % (
                self.services["paths"]["mount_dir"],
                self.services["paths"]["sub_dir"],
                self.services["paths"]["sub_lvl_dir1"],
                self.services["paths"]["random_data"]
            ))
            self.debug(returned_data_0)
            returned_data_1 = ssh.execute("cat %s/%s/%s/%s" % (
                self.services["paths"]["mount_dir"],
                self.services["paths"]["sub_dir"],
                self.services["paths"]["sub_lvl_dir2"],
                self.services["paths"]["random_data"]
            ))
            self.debug(returned_data_1)
        except Exception as e:
            self.fail("SSH failed for VM with IP address: %s" %
                      new_virtual_machine.ipaddress)
        # Verify returned data
        self.assertEqual(
            random_data_0,
            returned_data_0[0],
            "Verify newly attached volume contents with existing one"
        )
        self.assertEqual(
            random_data_1,
            returned_data_1[0],
            "Verify newly attached volume contents with existing one"
        )
        # Unmount the volume
        cmds = [
            "umount %s" % (self.services["paths"]["mount_dir"]),
        ]
        try:
            for c in cmds:
                self.debug(c)
                ssh_client.execute(c)

        except Exception as e:
            self.fail("SSH failed for VM with IP address: %s, Exception: %s" %
                      (new_virtual_machine.ipaddress, e))
        return
    def test_01_volume_snapshot(self):
        """ Test Volume (root) Snapshot
        # 1. Deploy a VM on primary storage and .
        # 2. Take snapshot on root disk
        # 3. Verify the snapshot's entry in the "snapshots" table 
                and presence of the corresponding 
                snapshot on the Secondary Storage
        # 4. Create Template from the Snapshot and Deploy a 
                VM using the Template
        # 5. Log in to the VM from template and make verify 
                the contents of the ROOT disk matches with the snapshot.
        # 6. Delete Snapshot and Deploy a Linux VM from the 
             Template and verify the successful deployment of the VM.
        # 7. Create multiple snapshots on the same volume and 
                Check the integrity of all the snapshots by creating 
                a template from the snapshot and deploying a Vm from it 
                and delete one of the snapshots
        # 8. Verify that the original checksum matches with the checksum 
                of VM's created from remaning snapshots
        # 9. Make verify the contents of the ROOT disk 
                matches with the snapshot
        # 10.Verify that Snapshot of both DATA and ROOT volume should 
                succeed when snapshot of Data disk of a VM is taken 
                when snapshot of ROOT volume of VM is in progress
        # 11.Create snapshot of data disk and verify the original checksum 
                matches with the volume created from snapshot
        # 12.Verify that volume's state should not change when snapshot of 
                a DATA volume is taken that is attached to a VM
        # 13.Verify that volume's state should not change when snapshot of 
                a DATA volume is taken that is not attached to a VM
        # 14.Verify that create Snapshot with quiescevm=True should succeed
        # 15.revertSnapshot() to revert VM to a specified 
                Volume snapshot for root volume
        """

        # Step 1
        # Get ROOT Volume Id
        root_volumes_cluster_list = list_volumes(
            self.apiclient,
            virtualmachineid=self.vm_1.id,
            type='ROOT',
            listall=True
        )

        root_volume_cluster = root_volumes_cluster_list[0]

        disk_volumes_cluster_list = list_volumes(
            self.apiclient,
            virtualmachineid=self.vm_1.id,
            type='DATADISK',
            listall=True
        )

        data_disk = disk_volumes_cluster_list[0]

        root_vol_state = root_volume_cluster.state

        ckecksum_random_root_cluster = createChecksum(
            service=self.testdata,
            virtual_machine=self.vm_1,
            disk=root_volume_cluster,
            disk_type="rootdiskdevice")

        self.vm_1.stop(self.apiclient)
        root_vol_snap = Snapshot.create(
            self.apiclient,
            root_volume_cluster.id)

        self.assertEqual(
            root_vol_snap.state,
            "BackedUp",
            "Check if the snapshot state is correct "
        )

        self.assertEqual(
            root_vol_state,
            root_volume_cluster.state,
            "Check if volume state has changed"
        )

        self.vm_1.start(self.apiclient)
        # Step 2
        snapshot_list = list_snapshots(
            self.apiclient,
            id=root_vol_snap.id
        )

        self.assertNotEqual(
            snapshot_list,
            None,
            "Check if result exists in list item call"
        )
        self.assertEqual(
            snapshot_list[0].id,
            root_vol_snap.id,
            "Check resource id in list resources call"
        )

        self.assertTrue(
            is_snapshot_on_nfs(
                self.apiclient,
                self.dbclient,
                self.config,
                self.zone.id,
                root_vol_snap.id))

        events = list_events(
            self.apiclient,
            account=self.account.name,
            domainid=self.account.domainid,
            type='SNAPSHOT.CREATE')

        event_list_validation_result = validateList(events)

        self.assertEqual(
            event_list_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            event_list_validation_result[2])
        self.debug("Events list contains event SNAPSHOT.CREATE")

        qresultset = self.dbclient.execute(
            "select * from event where type='SNAPSHOT.CREATE' AND \
                    description like '%%%s%%' AND state='Completed';" %
            root_volume_cluster.id)

        event_validation_result = validateList(qresultset)

        self.assertEqual(
            event_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            event_validation_result[2])

        self.assertNotEqual(
            len(qresultset),
            0,
            "Check DB Query result set"
        )

        qresult = str(qresultset)
        self.assertEqual(
            qresult.count('SNAPSHOT.CREATE') > 0,
            True,
            "Check SNAPSHOT.CREATE event in events table"
        )

        #Usage_Event
        qresultset = self.dbclient.execute(
                "select * from usage_event where type='SNAPSHOT.CREATE' AND \
                        resource_name='%s'" %
                root_vol_snap.name)

        usage_event_validation_result = validateList(qresultset)

        self.assertEqual(
               usage_event_validation_result[0],
               PASS,
               "event list validation failed due to %s" %
               usage_event_validation_result[2])

        self.assertNotEqual(
               len(qresultset),
               0,
               "Check DB Query result set"
              )

        self.assertEqual(
            self.dbclient.execute("select size from usage_event where type='SNAPSHOT.CREATE' AND \
            resource_name='%s'" %
            root_vol_snap.name)[0][0],
            root_vol_snap.physicalsize)

        # Step 3
        # create template from snapshot root_vol_snap
        templateFromSnapshot = Template.create_from_snapshot(
            self.apiclient,
            root_vol_snap,
            self.testdata["template_2"])

        self.assertNotEqual(
            templateFromSnapshot,
            None,
            "Check if result exists in list item call"
        )

        vm_from_temp = VirtualMachine.create(
            self.apiclient,
            self.testdata["small"],
            templateid=templateFromSnapshot.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
            mode=self.zone.networktype
        )

        self.assertNotEqual(
            vm_from_temp,
            None,
            "Check if result exists in list item call"
        )

        compareChecksum(
            self.apiclient,
            service=self.testdata,
            original_checksum=ckecksum_random_root_cluster,
            disk_type="rootdiskdevice",
            virt_machine=vm_from_temp
        )
        vm_from_temp.delete(self.apiclient)
        # Step 4
        root_vol_snap.delete(self.userapiclient)

        self.assertEqual(
            list_snapshots(
                self.apiclient,
                volumeid=root_volume_cluster.id,
            ), None, "Snapshot list should be empty")

        events = list_events(
            self.apiclient,
            account=self.account.name,
            domainid=self.account.domainid,
            type='SNAPSHOT.DELETE')

        event_list_validation_result = validateList(events)

        self.assertEqual(
            event_list_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            event_list_validation_result[2])

        self.debug("Events list contains event SNAPSHOT.DELETE")

        self.debug("select id from account where uuid = '%s';"
                   % self.account.id)

        qresultset = self.dbclient.execute(
            "select id from account where uuid = '%s';"
            % self.account.id
        )

        account_validation_result = validateList(qresultset)

        self.assertEqual(
            account_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            account_validation_result[2])

        self.assertNotEqual(
            len(qresultset),
            0,
            "Check DB Query result set"
        )
        qresult = qresultset[0]

        account_id = qresult[0]

        qresultset = self.dbclient.execute(
            "select * from event where type='SNAPSHOT.DELETE' AND \
                    account_id='%s' AND state='Completed';" %
            account_id)

        delete_snap_validation_result = validateList(qresultset)

        self.assertEqual(
            delete_snap_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            delete_snap_validation_result[2])

        self.assertNotEqual(
            len(qresultset),
            0,
            "Check DB Query result set"
        )

        qresult = str(qresultset)
        self.assertEqual(
            qresult.count('SNAPSHOT.DELETE') > 0,
            True,
            "Check SNAPSHOT.DELETE event in events table"
        )

        # Step 5
        # delete snapshot and deploy vm from snapshot
        vm_from_temp_2 = VirtualMachine.create(
            self.apiclient,
            self.testdata["small"],
            templateid=templateFromSnapshot.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
            mode=self.zone.networktype
        )

        self.assertNotEqual(
            vm_from_temp_2,
            None,
            "Check if result exists in list item call"
        )

        # Step 6:
        compareChecksum(
            self.apiclient,
            service=self.testdata,
            original_checksum=ckecksum_random_root_cluster,
            disk_type="rootdiskdevice",
            virt_machine=vm_from_temp_2
        )

        vm_from_temp_2.delete(self.apiclient)
        # Step 7
        # Multiple Snapshots
        self.vm_1.stop(self.apiclient)
        snaps = []
        for i in range(2):

            root_vol_snap = Snapshot.create(
                self.apiclient,
                root_volume_cluster.id)

            self.assertEqual(
                root_vol_snap.state,
                "BackedUp",
                "Check if the data vol snapshot state is correct "
            )

            snaps.append(root_vol_snap)

            templateFromSnapshot = Template.create_from_snapshot(
                self.apiclient,
                root_vol_snap,
                self.testdata["template_2"])

            self.assertNotEqual(
                templateFromSnapshot,
                None,
                "Check if result exists in list item call"
            )

            vm_from_temp = VirtualMachine.create(
                self.apiclient,
                self.testdata["small"],
                templateid=templateFromSnapshot.id,
                accountid=self.account.name,
                domainid=self.account.domainid,
                serviceofferingid=self.service_offering.id,
                zoneid=self.zone.id,
                mode=self.zone.networktype
            )

            self.assertNotEqual(
                vm_from_temp,
                None,
                "Check if result exists in list item call"
            )

            compareChecksum(
                self.apiclient,
                service=self.testdata,
                original_checksum=ckecksum_random_root_cluster,
                disk_type="rootdiskdevice",
                virt_machine=vm_from_temp
            )
            vm_from_temp.delete(self.apiclient)
            templateFromSnapshot.delete(self.apiclient)

        self.vm_1.start(self.apiclient)

        delete_snap = snaps.pop(1)
        delete_snap.delete(self.apiclient)

        self.assertEqual(
            Snapshot.list(
                self.apiclient,
                id=delete_snap.id
            ), None, "Snapshot list should be empty")

        # Step 8
        for snap in snaps:

            templateFromSnapshot = Template.create_from_snapshot(
                self.apiclient,
                snap,
                self.testdata["template_2"])

            self.assertNotEqual(
                templateFromSnapshot,
                None,
                "Check if result exists in list item call"
            )

            vm_from_temp = VirtualMachine.create(
                self.apiclient,
                self.testdata["small"],
                templateid=templateFromSnapshot.id,
                accountid=self.account.name,
                domainid=self.account.domainid,
                serviceofferingid=self.service_offering.id,
                zoneid=self.zone.id,
                mode=self.zone.networktype
            )

            self.assertNotEqual(
                vm_from_temp,
                None,
                "Check if result exists in list item call"
            )

            compareChecksum(
                self.apiclient,
                service=self.testdata,
                original_checksum=ckecksum_random_root_cluster,
                disk_type="rootdiskdevice",
                virt_machine=vm_from_temp
            )

            templateFromSnapshot.delete(self.apiclient)
            vm_from_temp.delete(self.apiclient)

        for snap in snaps:
            snap.delete(self.apiclient)

        # Step 9
        ckecksum_root_cluster = createChecksum(
            service=self.testdata,
            virtual_machine=self.vm_1,
            disk=root_volume_cluster,
            disk_type="rootdiskdevice")

        self.vm_1.stop(self.apiclient)

        root_vol_snap_2 = Snapshot.create(
            self.apiclient,
            root_volume_cluster.id)

        self.assertEqual(
            root_vol_snap_2.state,
            "BackedUp",
            "Check if the data vol snapshot state is correct "
        )
        snap_list_validation_result = validateList(events)

        self.assertEqual(
            snap_list_validation_result[0],
            PASS,
            "snapshot list validation failed due to %s" %
            snap_list_validation_result[2])

        self.assertNotEqual(
            snapshot_list,
            None,
            "Check if result exists in list item call"
        )

        templateFromSnapshot = Template.create_from_snapshot(
            self.apiclient,
            root_vol_snap_2,
            self.testdata["template_2"])

        self.debug(
            "create template event comlites with template %s name" %
            templateFromSnapshot.name)

        self.assertNotEqual(
            templateFromSnapshot,
            None,
            "Check if result exists in list item call"
        )

        vm_from_temp_2 = VirtualMachine.create(
            self.apiclient,
            self.testdata["small"],
            templateid=templateFromSnapshot.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
            mode=self.zone.networktype
        )

        self.assertNotEqual(
            vm_from_temp_2,
            None,
            "Check if result exists in list item call"
        )

        compareChecksum(
            self.apiclient,
            service=self.testdata,
            original_checksum=ckecksum_root_cluster,
            disk_type="rootdiskdevice",
            virt_machine=vm_from_temp_2
        )

        vm_from_temp_2.delete(self.apiclient)

        # Step 10
        # Take snapshot of Data disk of a VM , when snapshot of ROOT volume of 
        # VM is in progress
        try:
            self.vm_1.stop(self.apiclient)

            t1 = Thread(
                target=Snapshot.create,
                args=(
                    self.apiclient,
                    root_volume_cluster.id
                ))

            t2 = Thread(
                target=Snapshot.create,
                args=(
                    self.apiclient,
                    data_disk.id
                ))

            t1.start()
            t2.start()
            t1.join()
            t2.join()

        except:
            self.debug("Error: unable to start thread")

        # Step 11
        # Data Disk
        self.vm_1.start(self.apiclient)
        ckecksum_data_disk = createChecksum(
            service=self.testdata,
            virtual_machine=self.vm_1,
            disk=data_disk,
            disk_type="datadiskdevice_1")

        data_vol_state = data_disk.state

        self.vm_1.stop(self.apiclient)

        data_vol_snap = Snapshot.create(
            self.apiclient,
            data_disk.id)

        self.assertEqual(
            data_vol_snap.state,
            "BackedUp",
            "Check if the data vol snapshot state is correct "
        )

        self.assertEqual(
            data_vol_state,
            data_disk.state,
            "Check if volume state has changed"
        )

        data_snapshot_list = list_snapshots(
            self.apiclient,
            id=data_vol_snap.id
        )

        self.assertNotEqual(
            data_snapshot_list,
            None,
            "Check if result exists in list item call"
        )
        self.assertEqual(
            data_snapshot_list[0].id,
            data_vol_snap.id,
            "Check resource id in list resources call"
        )

        self.assertTrue(
            is_snapshot_on_nfs(
                self.apiclient,
                self.dbclient,
                self.config,
                self.zone.id,
                data_vol_snap.id))

        events = list_events(
            self.apiclient,
            account=self.account.name,
            domainid=self.account.domainid,
            type='SNAPSHOT.CREATE')

        event_list_validation_result = validateList(events)

        self.assertEqual(
            event_list_validation_result[0],
            PASS,
            "event list validation failed due to %s" %
            event_list_validation_result[2])
        self.debug("Events list contains event SNAPSHOT.CREATE")

        volumeFromSnap = Volume.create_from_snapshot(
            self.apiclient,
            data_vol_snap.id,
            self.testdata["volume"],
            account=self.account.name,
            domainid=self.account.domainid,
            zoneid=self.zone.id
        )

        self.assertTrue(
            is_snapshot_on_nfs(
                self.apiclient,
                self.dbclient,
                self.config,
                self.zone.id,
                data_vol_snap.id))

        new_vm = VirtualMachine.create(
            self.userapiclient,
            self.testdata["small"],
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            zoneid=self.zone.id,
            mode=self.zone.networktype
        )

        new_vm.attach_volume(
            self.apiclient,
            volumeFromSnap
        )

        new_vm.reboot(self.apiclient)

        compareChecksum(
            self.apiclient,
            service=self.testdata,
            original_checksum=ckecksum_data_disk,
            disk_type="datadiskdevice_1",
            virt_machine=new_vm
        )

        # Step 12
        data_volume_2 = Volume.create(
            self.apiclient,
            self.testdata["volume"],
            zoneid=self.zone.id,
            account=self.account.name,
            domainid=self.account.domainid,
            diskofferingid=self.disk_offering.id
        )

        self.vm_1.start(self.apiclient)
        self.vm_1.attach_volume(
            self.userapiclient,
            data_volume_2
        )

        self.vm_1.reboot(self.apiclient)       
        self.vm_1.stop(self.apiclient)

        data_vol_snap_1 = Snapshot.create(
            self.apiclient,
            data_volume_2.id)

        self.assertEqual(
            data_vol_snap_1.state,
            "BackedUp",
            "Check if the snapshot state is correct "
        )

        data_disk_2_list = Volume.list(
            self.userapiclient,
            listall=self.testdata["listall"],
            id=data_volume_2.id
        )

        self.vm_1.start(self.apiclient)

        checksum_data_2 = createChecksum(
            service=self.testdata,
            virtual_machine=self.vm_1,
            disk=data_disk_2_list[0],
            disk_type="datadiskdevice_2")

        # Step 13
        self.vm_1.detach_volume(self.apiclient,
                           data_volume_2)

        self.vm_1.reboot(self.apiclient)

        prev_state = data_volume_2.state

        data_vol_snap_2 = Snapshot.create(
            self.apiclient,
            data_volume_2.id)

        self.assertEqual(
            data_vol_snap_2.state,
            prev_state,
            "Check if the volume state is correct "
        )

        data_snapshot_list_2 = list_snapshots(
            self.apiclient,
            id=data_vol_snap_2.id
        )

        self.assertNotEqual(
            data_snapshot_list_2,
            None,
            "Check if result exists in list item call"
        )

        self.assertEqual(
            data_snapshot_list_2[0].id,
            data_vol_snap_2.id,
            "Check resource id in list resources call"
        )

        volumeFromSnap_2 = Volume.create_from_snapshot(
            self.apiclient,
            data_vol_snap_2.id,
            self.testdata["volume"],
            account=self.account.name,
            domainid=self.account.domainid,
            zoneid=self.zone.id
        )

        self.vm_2.attach_volume(
            self.userapiclient,
            volumeFromSnap_2
        )

        self.vm_2.reboot(self.apiclient)

        data_disk_2_list = Volume.list(
            self.userapiclient,
            listall=self.testdata["listall"],
            id=volumeFromSnap_2.id
        )

        compareChecksum(
            self.apiclient,
            service=self.testdata,
            original_checksum=checksum_data_2,
            disk_type="datadiskdevice_2",
            virt_machine=self.vm_2
        )

        # Step 14
        self.vm_1.stop(self.apiclient)
        with self.assertRaises(Exception):
            root_vol_snap.revertVolToSnapshot(self.apiclient)

        # Step 15
        root_snap = Snapshot.create(
            self.apiclient,
            root_volume_cluster.id)

        with self.assertRaises(Exception):
            root_snap.revertVolToSnapshot(self.apiclient)

        return
예제 #58
0
    def test_01_volume_from_snapshot(self):
        """Test Creating snapshot from volume having spaces in name(KVM)
        """
        # Validate the following
        # 1. Create a virtual machine and data volume
        # 2. Attach data volume to VM
        # 3. Login to machine; create temp/test directories on data volume
        #    and write some random data
        # 4. Snapshot the Volume
        # 5. Create another Volume from snapshot
        # 6. Mount/Attach volume to another virtual machine
        # 7. Compare data, data should match

        if self.hypervisor.lower() in ['hyperv']:
            self.skipTest("Snapshots feature is not supported on Hyper-V")

        random_data_0 = random_gen(size=100)
        random_data_1 = random_gen(size=100)

        self.debug("random_data_0 : %s" % random_data_0)
        self.debug("random_data_1: %s" % random_data_1)

        try:
            ssh_client = self.virtual_machine.get_ssh_client()
        except Exception as e:
            self.fail("SSH failed for VM: %s" %
                      self.virtual_machine.ipaddress)

        volume = Volume.create(
            self.apiclient,
            self.services["volume"],
            zoneid=self.zone.id,
            account=self.account.name,
            domainid=self.account.domainid,
            diskofferingid=self.disk_offering.id
        )
        self.debug("Created volume with ID: %s" % volume.id)
        self.virtual_machine.attach_volume(
            self.apiclient,
            volume
        )
        self.debug("Attach volume: %s to VM: %s" %
                   (volume.id, self.virtual_machine.id))

        self.debug("Formatting volume: %s to ext3" % volume.id)
        # Format partition using ext3
        # Note that this is the second data disk partition of virtual machine
        # as it was already containing data disk before attaching the new
        # volume, Hence datadiskdevice_2
        format_volume_to_ext3(
            ssh_client,
            self.services["volume"][self.hypervisor]["datadiskdevice_2"]
        )
        cmds = [
            "fdisk -l",
            "mkdir -p %s" %
            self.services["paths"]["mount_dir"],
            "mount -t ext3 %s1 %s" %
            (self.services["volume"][
                self.hypervisor]["datadiskdevice_2"],
                self.services["paths"]["mount_dir"]),
            "mkdir -p %s/%s/{%s,%s} " %
            (self.services["paths"]["mount_dir"],
                self.services["paths"]["sub_dir"],
                self.services["paths"]["sub_lvl_dir1"],
                self.services["paths"]["sub_lvl_dir2"]),
            "echo %s > %s/%s/%s/%s" %
            (random_data_0,
                self.services["paths"]["mount_dir"],
                self.services["paths"]["sub_dir"],
                self.services["paths"]["sub_lvl_dir1"],
                self.services["paths"]["random_data"]),
            "echo %s > %s/%s/%s/%s" %
            (random_data_1,
                self.services["paths"]["mount_dir"],
                self.services["paths"]["sub_dir"],
                self.services["paths"]["sub_lvl_dir2"],
                self.services["paths"]["random_data"]),
            "cat %s/%s/%s/%s" %
            (self.services["paths"]["mount_dir"],
                self.services["paths"]["sub_dir"],
                self.services["paths"]["sub_lvl_dir1"],
                self.services["paths"]["random_data"])]
        for c in cmds:
            self.debug("Command: %s" % c)
            result = ssh_client.execute(c)
            self.debug(result)

        # Unmount the Sec Storage
        cmds = [
            "umount %s" % (self.services["paths"]["mount_dir"]),
        ]
        for c in cmds:
            self.debug("Command: %s" % c)
            ssh_client.execute(c)

        list_volume_response = Volume.list(
            self.apiclient,
            virtualmachineid=self.virtual_machine.id,
            type='DATADISK',
            id=volume.id
        )

        self.assertEqual(
            isinstance(list_volume_response, list),
            True,
            "Check list volume response for valid data"
        )
        volume_response = list_volume_response[0]
        # Create snapshot from attached volume
        snapshot = Snapshot.create(
            self.apiclient,
            volume_response.id,
            account=self.account.name,
            domainid=self.account.domainid
        )
        self.debug("Created snapshot: %s" % snapshot.id)
        # Create volume from snapshot
        volume_from_snapshot = Volume.create_from_snapshot(
            self.apiclient,
            snapshot.id,
            self.services["volume"],
            account=self.account.name,
            domainid=self.account.domainid
        )

        # Detach the volume from virtual machine
        self.virtual_machine.detach_volume(
            self.apiclient,
            volume
        )
        self.debug("Detached volume: %s from VM: %s" %
                   (volume.id, self.virtual_machine.id))

        self.debug("Created Volume: %s from Snapshot: %s" % (
            volume_from_snapshot.id,
            snapshot.id))
        volumes = Volume.list(
            self.apiclient,
            id=volume_from_snapshot.id
        )
        self.assertEqual(
            isinstance(volumes, list),
            True,
            "Check list response returns a valid list"
        )

        self.assertNotEqual(
            len(volumes),
            None,
            "Check Volume list Length"
        )
        self.assertEqual(
            volumes[0].id,
            volume_from_snapshot.id,
            "Check Volume in the List Volumes"
        )
        # Attaching volume to new VM
        new_virtual_machine = VirtualMachine.create(
            self.apiclient,
            self.services["server_without_disk"],
            templateid=self.template.id,
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
            mode=self.services["mode"]
        )
        self.debug("Deployed new VM for account: %s" % self.account.name)
        # self.cleanup.append(new_virtual_machine)

        self.debug("Attaching volume: %s to VM: %s" % (
            volume_from_snapshot.id,
            new_virtual_machine.id
        ))

        new_virtual_machine.attach_volume(
            self.apiclient,
            volume_from_snapshot
        )

        # Rebooting is required so that newly attached disks are detected
        self.debug("Rebooting : %s" % new_virtual_machine.id)

        new_virtual_machine.reboot(self.apiclient)

        try:
            # Login to VM to verify test directories and files
            ssh = new_virtual_machine.get_ssh_client()

            # Mount datadiskdevice_1 because this is the first data disk of the
            # new virtual machine
            cmds = [
                "fdisk -l",
                "mkdir -p %s" %
                self.services["paths"]["mount_dir"],
                "mount -t ext3 %s1 %s" %
                (self.services["volume"][
                    self.hypervisor]["datadiskdevice_1"],
                    self.services["paths"]["mount_dir"]),
            ]

            for c in cmds:
                self.debug("Command: %s" % c)
                result = ssh.execute(c)
                self.debug(result)

            returned_data_0 = ssh.execute(
                "cat %s/%s/%s/%s" % (
                    self.services["paths"]["mount_dir"],
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir1"],
                    self.services["paths"]["random_data"]
                ))
            returned_data_1 = ssh.execute(
                "cat %s/%s/%s/%s" % (
                    self.services["paths"]["mount_dir"],
                    self.services["paths"]["sub_dir"],
                    self.services["paths"]["sub_lvl_dir2"],
                    self.services["paths"]["random_data"]
                ))
        except Exception as e:
            self.fail("SSH access failed for VM: %s, Exception: %s" %
                      (new_virtual_machine.ipaddress, e))

        self.debug("returned_data_0: %s" % returned_data_0[0])
        self.debug("returned_data_1: %s" % returned_data_1[0])

        # Verify returned data
        self.assertEqual(
            random_data_0,
            returned_data_0[0],
            "Verify newly attached volume contents with existing one"
        )
        self.assertEqual(
            random_data_1,
            returned_data_1[0],
            "Verify newly attached volume contents with existing one"
        )
        # Unmount the Sec Storage
        cmds = [
            "umount %s" % (self.services["paths"]["mount_dir"]),
        ]
        for c in cmds:
            self.debug("Command: %s" % c)
            ssh_client.execute(c)
        return
예제 #59
0
    def test_01_snapshot_on_rootVolume(self):
        """Test create VM with default cent os template and create snapshot
            on root disk of the vm
        """
        # Validate the following
        # 1. Deploy a Linux VM using default CentOS template, use small service
        #    offering, disk offering
        # 2. Create snapshot on the root disk of this newly cteated vm
        # 3. listSnapshots should list the snapshot that was created.
        # 4. verify that secondary storage NFS share contains the reqd
        # volume under /secondary/snapshots/$accountid/$volumeid/$snapshot_uuid
        # 5. verify backup_snap_id was non null in the `snapshots` table

        # Create virtual machine with small systerm offering and disk offering
        new_virtual_machine = VirtualMachine.create(
                                    self.apiclient,
                                    self.services["virtual_machine"],
                                    templateid=self.template.id,
                                    zoneid=self.zone.id,
                                    accountid=self.account.name,
                                    domainid=self.account.domainid,
                                    serviceofferingid=self.service_offering.id,
                                    diskofferingid=self.disk_offering.id,
                                )
        self.debug("Virtual machine got created with id: %s" %
                                                    new_virtual_machine.id)
        list_virtual_machine_response = VirtualMachine.list(
                                                    self.apiclient,
                                                    id=new_virtual_machine.id)
        self.assertEqual(isinstance(list_virtual_machine_response, list),
                         True,
                         "Check listVirtualMachines returns a valid list")

        self.assertNotEqual(len(list_virtual_machine_response),
                            0,
                            "Check listVirtualMachines response")
        self.cleanup.append(new_virtual_machine)

        # Getting root volume id of the vm created above
        list_volume_response = Volume.list(
                                self.apiclient,
                                virtualmachineid=list_virtual_machine_response[0].id,
                                type="ROOT",
                                account=self.account.name,
                                domainid=self.account.domainid)

        self.assertEqual(isinstance(list_volume_response, list),
                         True,
                         "Check listVolumes returns a valid list")
        self.assertNotEqual(len(list_volume_response),
                            0,
                            "Check listVolumes response")
        self.debug(
            "Snapshot will be created on the volume with voluem id: %s" %
                                                    list_volume_response[0].id)

        # Perform snapshot on the root volume
        root_volume_snapshot = Snapshot.create(
                                        self.apiclient,
                                       volume_id=list_volume_response[0].id)
        self.debug("Created snapshot: %s for vm: %s" % (
                                        root_volume_snapshot.id,
                                        list_virtual_machine_response[0].id))
        list_snapshot_response = Snapshot.list(
                                        self.apiclient,
                                        id=root_volume_snapshot.id,
                                        account=self.account.name,
                                        domainid=self.account.domainid)
        self.assertEqual(isinstance(list_snapshot_response, list),
                         True,
                         "Check listSnapshots returns a valid list")

        self.assertNotEqual(len(list_snapshot_response),
                            0,
                            "Check listSnapshots response")
        # Verify Snapshot state
        self.assertEqual(
                            list_snapshot_response[0].state in [
                                                                'BackedUp',
                                                                'CreatedOnPrimary'
                                                                ],
                            True,
                            "Snapshot state is not as expected. It is %s" %
                            list_snapshot_response[0].state
                        )

        self.assertEqual(
                list_snapshot_response[0].volumeid,
                list_volume_response[0].id,
                "Snapshot volume id is not matching with the vm's volume id")
        self.cleanup.append(root_volume_snapshot)

        # Below code is to verify snapshots in the backend and in db.
        # Verify backup_snap_id field in the snapshots table for the snapshot created, it should not be null

        self.debug("select id, removed, backup_snap_id from snapshots where uuid = '%s';" % root_volume_snapshot.id)
        qryresult = self.dbclient.execute("select id, removed, backup_snap_id from snapshots where uuid = '%s';" % root_volume_snapshot.id)
        self.assertNotEqual(len(qryresult), 0, "Check sql query to return snapshots list")
        snapshot_qry_response = qryresult[0]
        snapshot_id = snapshot_qry_response[0]
        is_removed = snapshot_qry_response[1]
        backup_snap_id = snapshot_qry_response[2]
        self.assertNotEqual(is_removed, "NULL", "Snapshot is removed from CS, please check the logs")
        msg = "Backup snapshot id is set to null for the backedup snapshot :%s" % snapshot_id
        self.assertNotEqual(backup_snap_id, "NULL", msg )

        # Check if the snapshot is present on the secondary storage
        self.assertTrue(is_snapshot_on_nfs(self.apiclient, self.dbclient, self.config, self.zone.id, root_volume_snapshot.id))

        return
    def test_02_template_permissions(self):
        """
        @Desc: Test to create Public Template by registering or by snapshot and volume when
        Global parameter 'allow.public.user.template' is set to  False
        @steps:
        1.Set Global parameter 'allow.public.user.template' as False. Restart Management server
        2. Create a domain
        3. Create a domain admin and a domain user
        4. Create a vm as domain user
        5. take snapshot of root disk as user vm
        6. try to create public template from snapshot . It should fail
        7. stop the VM
        8. take the public template from volume. it should fail
        9. register a public template as a domain user . it should fail
        10. create a VM  as domain admin
        11. create a snapshot of root disk as domain admin
        12 create a public template of the snapshot .it should fail
        13. Register a public template as domain admin. it should fail
        14 Stop the vm as domain admin
        15. Create a template from volume as domain admin . it should fail

        """
        self.updateConfigurAndRestart("allow.public.user.templates", "false")
        
        user_account = Account.create(
            self.apiclient,
            self.testdata["account2"],
            admin=False,
            domainid=self.domain.id
        )
        admin_user = self.account.user[0]
        self.admin_api_client = self.testClient.getUserApiClient(
            admin_user.username,
            self.domain.name)
        user = user_account.user[0]
        self.user_api_client = self.testClient.getUserApiClient(
            user.username,
            self.domain.name)

        self.testdata["templates"]["ispublic"] = True
        # Register new public template as domain user
        # Exception should be raised for registering public template
        try:
            template = Template.register(
                self.user_api_client,
                self.testdata["templates"],
                zoneid=self.zone.id,
                account=user_account.name,
                domainid=user_account.domainid,
                hypervisor=self.hypervisor
            )
            self.updateConfigurAndRestart("allow.public.user.templates", "true")
            self.fail("Template creation passed for user")
        except CloudstackAPIException  as e:
            self.assertRaises("Exception Raised : %s" % e)
        # Register new public template as domain admin
        # Exception should be raised for registering public template
        try:
            template = Template.register(
                self.admin_api_client,
                self.testdata["templates"],
                zoneid=self.zone.id,
                account=self.account.name,
                domainid=self.account.domainid,
                hypervisor=self.hypervisor
            )
            self.updateConfigurAndRestart("allow.public.user.templates", "true")
            self.fail("Template creation passed for domain admin")
        except CloudstackAPIException  as e:
            self.assertRaises("Exception Raised : %s" % e)

        user_vm_created = VirtualMachine.create(
            self.user_api_client,
            self.testdata["virtual_machine"],
            accountid=user_account.name,
            domainid=user_account.domainid,
            serviceofferingid=self.service_offering.id,
        )
        self.assertIsNotNone(user_vm_created,
                             "VM creation failed"
        )
        # Get the Root disk of VM
        volume = list_volumes(
            self.user_api_client,
            virtualmachineid=user_vm_created.id,
            type='ROOT',
            listall=True
        )
        snapshot_created = Snapshot.create(
            self.user_api_client,
            volume[0].id,
            account=user_account.name,
            domainid=user_account.domainid
        )
        self.assertIsNotNone(
            snapshot_created,
            "Snapshot creation failed"
        )
        self.debug("Creating a template from snapshot: %s" % snapshot_created.id)
        #
        # Generate public template from the snapshot
        self.testdata["template"]["ispublic"] = True
        try:
            user_template = Template.create_from_snapshot(
                self.user_api_client,
                snapshot_created,
                self.testdata["template"]
            )
            self.updateConfigurAndRestart("allow.public.user.templates", "true")
            self.fail("Template creation passed from snapshot for domain user")
        except CloudstackAPIException  as e:
            self.assertRaises("Exception Raised : %s" % e)

        VirtualMachine.stop(user_vm_created, self.user_api_client)
        list_stopped_vms_after = VirtualMachine.list(
            self.user_api_client,
            listall=self.testdata["listall"],
            domainid=user_account.domainid,
            state="Stopped")
        status = validateList(list_stopped_vms_after)
        self.assertEquals(
            PASS,
            status[0],
            "Stopped VM is not in Stopped state"
        )
        try:
            user_template = Template.create(
                self.user_api_client, self.testdata["template"],
                volume[0].id
            )
            self.updateConfigurAndRestart("allow.public.user.templates", "true")
            self.fail("Template creation passed from volume for domain user")
        except CloudstackAPIException  as e:
            self.assertRaises("Exception Raised : %s" % e)

        admin_vm_created = VirtualMachine.create(
            self.admin_api_client,
            self.testdata["virtual_machine"],
            accountid=self.account.name,
            domainid=self.account.domainid,
            serviceofferingid=self.service_offering.id,
        )
        self.assertIsNotNone(
            admin_vm_created,
            "VM creation failed"
        )
        # Get the Root disk of VM
        volume = list_volumes(
            self.admin_api_client,
            virtualmachineid=admin_vm_created.id,
            type='ROOT',
            listall=True
        )
        snapshot_created = Snapshot.create(
            self.admin_api_client,
            volume[0].id,
            account=self.account.name,
            domainid=self.account.domainid
        )
        self.assertIsNotNone(
            snapshot_created,
            "Snapshot creation failed"
        )
        self.debug("Creating a template from snapshot: %s" % snapshot_created.id)
        #
        #    Generate public template from the snapshot
        try:
            admin_template = Template.create_from_snapshot(
                self.admin_api_client,
                snapshot_created,
                self.testdata["template"]
            )
            self.updateConfigurAndRestart("allow.public.user.templates", "true")
            self.fail("Template creation passed from snapshot for domain admin")
        except CloudstackAPIException  as e:
            self.assertRaises("Exception Raised : %s" % e)

        VirtualMachine.stop(admin_vm_created, self.admin_api_client)
        list_stopped_vms_after = VirtualMachine.list(
            self.admin_api_client,
            listall=self.testdata["listall"],
            domainid=self.account.domainid,
            state="Stopped")
        status = validateList(list_stopped_vms_after)
        self.assertEquals(
            PASS,
            status[0],
            "Stopped VM is not in Stopped state"
        )
        try:
            admin_template = Template.create(
                self.admin_api_client, self.testdata["template"],
                volume[0].id
            )
            self.updateConfigurAndRestart("allow.public.user.templates", "true")
            self.fail("Template creation passed from volume for domain admin")
        except CloudstackAPIException  as e:
            self.assertRaises("Exception Raised : %s" % e)

        self.updateConfigurAndRestart("allow.public.user.templates", "true")
        return