def struct():
if isinstance(pos, m.Structure):
return pos
elif isinstance(pos, tuple):
return m.Structure(chip, start=pos, direction=rotation)
else:
return chip.structure(pos)
def struct():
if isinstance(structure, m.Structure):
return structure
elif isinstance(structure, tuple):
return m.Structure(chip, structure)
else:
return chip.structure(structure)
def Hamburgermon(chip,
pos,
rotation=0,
qwidth=1120,
qheight=795,
qr_out=200,
minQbunToGnd=100,
qbunwidth=960,
qbunthick=0,
qbunr=60,
qbunseparation=69.3751,
qccap_padw=40,
qccap_padl=170,
qccap_padr_out=10,
qccap_padr_ins=4.5,
qccap_gap=30,
qccapl=210,
qccapw=0,
qccapr_ins=30,
qccapr_out=15,
qccap_steml=70,
qccap_stemw=None,
XLAYER=None,
bgcolor=None,
**kwargs):
'''
Generates a hamburger shaped qubit. Needs XOR layers to define base metal layer.
Junction and contact tab parameters are monkey patched to Junction function through kwargs.
'''
thisStructure = None
if isinstance(pos, tuple):
thisStructure = m.Structure(chip, start=pos, direction=rotation)
def struct():
if isinstance(pos, m.Structure):
return pos
elif isinstance(pos, tuple):
return thisStructure
else:
return chip.structure(pos)
if bgcolor is None: #color for junction, not undercut
bgcolor = chip.wafer.bg()
#get layers from wafer
if XLAYER is None:
try:
XLAYER = chip.wafer.XLAYER
except AttributeError:
chip.wafer.setupXORlayer()
XLAYER = chip.wafer.XLAYER
if qccap_stemw is None:
try:
qccap_stemw = struct().defaults['w']
except KeyError:
print('\x1b[33mw not defined in ', chip.chipID, '!\x1b[0m')
qccap_stemw = 6
#increase thicknesses if radii are too large
qccapw = max(qccapw, 2 * qccapr_out)
qbunthick = max(qbunthick, 2 * qbunr)
qccap_padw = max(qccap_padw, 2 * qccap_padr_out)
qccap_padl = max(qccap_padl, 2 * qccap_padr_out)
#increase qubit width and height if buns are too close to ground
qwidth = max(qwidth, qbunwidth + 2 * minQbunToGnd)
qheight = max(
qheight,
max(qccap_steml + qccap_padl, qccap_gap + qccapl) +
2 * max(2 * qbunr, qbunthick) + qbunseparation + minQbunToGnd)
#cache junction position and figure out if we're using structures or not
jxpos = qccap_steml + qccap_padl + qccap_gap + qbunthick + qbunseparation / 2
if thisStructure is not None:
#not using structures
struct().shiftPos(-jxpos)
centerPos = struct().getPos((jxpos, 0))
#hole in basemetal (negative)
chip.add(
RoundRect(struct().start,
qheight,
qwidth,
qr_out,
valign=const.MIDDLE,
rotation=struct().direction,
bgcolor=bgcolor,
**kwargs))
#xor defined qubit (positive)
if qccap_padr_ins > 0 and qccap_stemw + 2 * qccap_padr_ins < qccap_padw - 2 * qccap_padr_out:
chip.add(
InsideCurve(struct().getPos((qccap_steml, qccap_stemw / 2)),
qccap_padr_ins,
vflip=True,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
InsideCurve(struct().getPos((qccap_steml, -qccap_stemw / 2)),
qccap_padr_ins,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
dxf.rectangle(struct().start,
qccap_steml,
qccap_stemw,
valign=const.MIDDLE,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargStrip(kwargs)))
chip.add(
RoundRect(struct().getPos((qccap_steml, 0)),
qccap_padl,
qccap_padw,
qccap_padr_out,
valign=const.MIDDLE,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
if qccapr_ins > 0:
chip.add(
InsideCurve(struct().getPos(
(jxpos - qbunseparation / 2 - qbunthick,
qccap_padw / 2 + qccap_gap)),
qccapr_ins,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
InsideCurve(struct().getPos(
(jxpos - qbunseparation / 2 - qbunthick,
qccap_padw / 2 + qccap_gap + qccapw)),
qccapr_ins,
vflip=True,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
InsideCurve(struct().getPos(
(jxpos - qbunseparation / 2 - qbunthick,
-qccap_padw / 2 - qccap_gap)),
qccapr_ins,
vflip=True,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
InsideCurve(struct().getPos(
(jxpos - qbunseparation / 2 - qbunthick,
-qccap_padw / 2 - qccap_gap - qccapw)),
qccapr_ins,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
RoundRect(struct().getPos((jxpos - qbunseparation / 2 - qbunthick,
qccap_padw / 2 + qccap_gap)),
qccapl,
qccapw,
qccapr_out,
roundCorners=[1, 0, 0, 1],
halign=const.RIGHT,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
chip.add(
RoundRect(struct().getPos((jxpos - qbunseparation / 2 - qbunthick,
-qccap_padw / 2 - qccap_gap)),
qccapl,
qccapw,
qccapr_out,
roundCorners=[1, 0, 0, 1],
halign=const.RIGHT,
vflip=True,
rotation=struct().direction,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs))
JProbePads(chip,
centerPos,
rotation=struct().direction,
padwidth=qbunthick,
padheight=qbunwidth,
padradius=qbunr,
separation=qbunseparation,
layer=XLAYER,
bgcolor=chip.bg(XLAYER),
**kwargs)
ManhattanJunction(chip,
centerPos,
rotation=struct().direction,
separation=qbunseparation,
**kwargs)
return centerPos, struct().direction
def Transmon3D(chip,
pos,
rotation=0,
bgcolor=None,
padh=200,
padh2=200,
padw=3000,
padw2=3000,
taperw=0,
taperw2=0,
leadw=85,
leadw2=85,
leadh=20,
leadh2=20,
separation=20,
r_out=0.75,
r_ins=0.75,
taboffs=-0.05,
steml=1.5,
gapl=1.5,
tabl=2,
stemw=3,
gapw=3,
tabw=0.5,
jpadTaper=10,
jpadw=25,
jpadh=16,
jpadSeparation=28,
jfingerl=4.5,
jfingerex=1.5,
jleadw=1,
junctionClass=ManhattanJunction,
**kwargs):
'''
Generates transmon paddles with a manhattan junction at the center.
Junction and contact tab parameters are monkey patched to Junction function through kwargs.
padh, padh2: left,right transmon pad height
padw, padw2: left,right transmon pad width (or length)
taperw, taperw2: left,right taper length from pad to lead
leadw, leadw2: left,right lead width
leadh, leadh2: left,right lead height
separation: separation between leads (where junction goes)
'''
thisStructure = None
if isinstance(pos, tuple):
thisStructure = m.Structure(chip, start=pos, direction=rotation)
def struct():
if isinstance(pos, m.Structure):
return pos
elif isinstance(pos, tuple):
return thisStructure
else:
return chip.structure(pos)
if bgcolor is None: #color for junction, not undercut
bgcolor = chip.wafer.bg()
j_struct = struct().start
#start where the junction is, move left to where left pad starts
struct().shiftPos(-separation / 2 - leadw - padw)
JSingleProbePad(chip,
struct(),
padwidth=padw,
padheight=padh,
tabShoulder=True,
tabShoulderWidth=leadh,
tabShoulderLength=leadw,
flipped=False,
padradius=None,
r_out=r_out,
r_ins=r_ins,
taboffs=taboffs,
gapl=gapl,
tabl=tabl,
gapw=gapw,
tabw=tabw,
absoluteDimensions=True,
**kwargs)
struct().shiftPos(separation)
JSingleProbePad(chip,
struct(),
padwidth=padw2,
padheight=padh2,
tabShoulder=True,
tabShoulderWidth=leadh2,
tabShoulderLength=leadw2,
flipped=True,
padradius=None,
r_out=r_out,
r_ins=r_ins,
taboffs=taboffs,
gapl=gapl,
tabl=tabl,
gapw=gapw,
tabw=tabw,
absoluteDimensions=True,
**kwargs)
#r_out=0,r_ins=0,taboffs=3,gapl=0,tabl=0,gapw=gapw,tabw=2,absoluteDimensions=True,**kwargs)
#write the junction
junctionClass(chip,
j_struct,
rotation=struct().direction,
jpadTaper=jpadTaper,
jpadw=jpadw,
jpadh=jpadh,
separation=jpadSeparation + jpadTaper,
jfingerl=jfingerl,
jfingerex=jfingerex,
leadw=jleadw,
**kwargs)
def __init__(self,wafer,chipID,layer):
m.Chip7mm.__init__(self,wafer,chipID,layer,defaults={'w':10, 's':5, 'radius':50,'r_out':5,'r_ins':5})
for s in self.structures:
self.add(dxf.rectangle(s.start,80,20,rotation=s.direction,layer='FRAME',halign = const.RIGHT,valign = const.MIDDLE))
#test strip functions
Strip_stub_open(self, 3,flipped=True)
Strip_bend(self, 3,angle=20,CCW=False)
Strip_straight(self, 3,20)
Strip_taper(self, 3,w1=2)
Strip_bend(self, 3,w=2)
Strip_stub_short(self,3,w=2,extra_straight_section=True)
Strip_stub_open(self, 3, w=40,flipped=True)
Strip_straight(self,3,40,w=40)
Strip_stub_open(self, 3, w=40)
Strip_stub_short(self,3,w=2,extra_straight_section=True,flipped=True)
Strip_wiggles(self,3,length=None,nTurns=5,maxWidth=200,w=2,radius=25)
#test twopincpw functions
TwoPinCPW_straight(self, 3, 40, s_ins=2,Width=250)
s3 = self.structures[3].cloneAlong()
Inductor_wiggles(self, 3, w=2+2*10,nTurns=2,maxWidth=200,radius=24,Width=250)
Strip_wiggles(self, s3, w=2,nTurns=2,maxWidth=200-10,radius=24)
#now do the same with TwoPinCPW_wiggles
TwoPinCPW_wiggles(self,s3,s_ins=2,nTurns=2,maxWidth=200,radius=24,Width=250)
#launcher subcomponents
CPW_stub_open(self,1,r_out=100,r_ins=50,w=300,s=160,flipped=True)
CPW_straight(self,1,300,w=300,s=160)
CPW_taper(self,1,w0=300,s0=160)
#
CPW_straight(self,1,600)
JellyfishResonator(self,self.structures[1].cloneAlongLast((300,40),newDirection=90),520,480,5565,w_cap=40,s_cap=20,maxWidth=100)
CPW_bend(self,1,angle=45)
CPW_straight(self,1,600)
DoubleJellyfishResonator(self,self.structures[1].cloneAlongLast((100,40),newDirection=90),520,480,2565,w_cap=40,s_cap=20,maxWidth=70,ialign=const.MIDDLE)
DoubleJellyfishResonator(self,self.structures[1].cloneAlongLast((-200,640),newDirection=90),480,200,2565,w_ind=2,w_cap=40,s_cap=20,maxWidth=60,ialign=const.MIDDLE)
#clone position for new structure
s0 = m.Structure(self,start=self.structures[1].getLastPos((300,-40)),defaults={'w':20, 's':10, 'radius':100,'r_out':5,'r_ins':5})
CPW_stub_short(self,1,s=10,r_out=2.5,curve_out=False)
self.structure(1).shiftPos(40)
CPW_stub_short(self,1,s=10,r_out=2.5,curve_ins=False,flipped=True)
CPW_straight(self,1,200)
DoubleJellyfishResonator(self,self.structures[1].cloneAlongLast((100,40),newDirection=90),520,80,2565,w_cap=40,s_cap=20,maxWidth=70,ialign=const.MIDDLE)
CPW_bend(self,1,angle=20,radius=200)
CPW_straight(self,1,200,10,5)
CPW_wiggles(self,1,length=3750,maxWidth=270,CCW=False)
CPW_straight(self,1,200)
CPW_bend(self,1,angle=55,CCW=False,radius=200)
CPW_wiggles(self,1,length=2350,maxWidth=370,CCW=False,stop_bend=False)
CPW_wiggles(self,1,length=1205,maxWidth=170,CCW=False,stop_bend=False,start_bend=False)
CPW_wiggles(self,1,length=2350,maxWidth=370,CCW=False,start_bend=False,stop_bend=False)
CPW_straight(self,1,600)
#s1 = m.Structure(self,start=self.structures[1].getLastPos((300,-50)),direction=self.structures[1].direction,defaults=self.defaults)
s1 = self.structures[1].cloneAlongLast((300,-50))
s2 = m.Structure(self,start=self.structures[1].getLastPos((300,-100)),direction=self.structures[1].direction,defaults=self.defaults)
s3 = m.Structure(self,start=self.structures[1].getLastPos((300,-150)),direction=self.structures[1].direction,defaults=self.defaults)
CPW_wiggles(self,1,length=1200,maxWidth=270,start_bend=False,stop_bend=False)
CPW_wiggles(self,1,length=1200,maxWidth=270,radius=10,start_bend=False,stop_bend=True)
CPW_straight(self,1,20,s=195)
#CPW_straight(self,1,200)
Inductor_wiggles(self,1,length=200,Width=200,nTurns=10,radius=20,start_bend=True,stop_bend=False,pad_to_width=True)
#CPW_stub_open(self,1,r_out=0)
CPW_launcher(self,2)
#continue independent structure
CPW_stub_open(self,s0,flipped=True,extra_straight_section=True,length=40)
CPW_straight(self,s0,200)
CPW_taper(self,s0,50,w1=self.structures[2].defaults['w'],s1=self.structures[2].defaults['s'])
s0.defaults['w']=self.structures[2].defaults['w']
s0.defaults['s']=self.structures[2].defaults['s']
CPW_directTo(self,s0,self.structures[2],radius=200)
#continue independent structure 2
CPW_stub_open(self,s1,flipped=True,w=20,s=10)
CPW_straight(self,s1,100,w=20,s=10)
CPW_taper(self,s1,w0=20,s0=10)
CPW_straight(self,s1,400)
CPW_stub_open(self,s2,flipped=True,w=20,s=10)
CPW_straight(self,s2,100,w=20,s=10)
CPW_taper(self,s2,w0=20,s0=10)
CPW_stub_open(self,s3,flipped=True,w=20,s=10)
CPW_straight(self,s3,100,w=20,s=10)
CPW_taper(self,s3,w0=20,s0=10)
#CPW_bend(self,s3,30,radius=200)
CPW_launcher(self,8,l_pad=360,l_gap=320,layer='MARKERS',r_ins=30,ptDensity=8)
CPW_launcher(self,5)
CPW_launcher(self,4)
#>>>>>>>>>>> test directTo functions <<<<<<<<<<<<<<<
CPW_directTo(self,s2,self.structures[5],radius=200)
CPW_directTo(self,s3,self.structures[4],radius=200)
#>>>>>>>>>>> test cpw_cap functions <<<<<<<<<<<<<<<
CPW_cap(self, s1, 4)
CPW_straight(self, s1, 6)
CPW_taper_cap(self, s1, 2, 60, l_straight=25, l_taper=100)
CPW_directTo(self,s1,self.structures[8],radius=200)
#>>>>>>>>>>> test cpw_tee functions <<<<<<<<<<<<<<<
s4=m.Structure(self,start=self.centered((-100,-2800)),direction=15,defaults={'w':10, 's':5, 'radius':50,'r_out':5})
CPW_stub_open(self,s4,flipped=True,w=20,s=10)
CPW_straight(self,s4,100,w=20,s=10)
CPW_taper(self,s4,w0=20,s0=10)
CPW_straight(self,s4,80)
s4a,s4b = CPW_tee(self,s4,radius=3)#continue CPW off of each tee end
CPW_straight(self,s4a,30)
CPW_straight(self,s4b,50)
s4.shiftPos(60)#flipped
s4a,s4b =CPW_tee(self,s4,hflip=True)
CPW_straight(self,s4,20)
CPW_straight(self,s4a,30)
CPW_straight(self,s4b,40)
s4.shiftPos(40)#w different
CPW_straight(self,s4,20)
s4a,s4b = CPW_tee(self,s4,w1=20)
CPW_straight(self,s4a,30) #branching structure defaults are automatically redefined
CPW_taper(self,s4b,30,w1=10,s1=3)
s4.shiftPos(60)#s1<s
CPW_straight(self,s4,20)
s4a,s4b = CPW_tee(self,s4,w1=4,s1=3)
CPW_straight(self,s4a,30) #branching structure defaults are automatically redefined
CPW_straight(self,s4b,20)
s4.shiftPos(40)#s1>s
CPW_straight(self,s4,20)
s4a,s4b = CPW_tee(self,s4,w1=15,s1=15,r_ins=0)
CPW_straight(self,s4a,30) #branching structure defaults are automatically redefined
CPW_straight(self,s4b,20)
s4.shiftPos(80)#flipped AND s1<s
s4a,s4b = CPW_tee(self,s4,w1=4,s1=3,hflip=True,r_ins=20)
CPW_straight(self,s4,20)
CPW_straight(self,s4a,30) #branching structure defaults are automatically redefined
CPW_straight(self,s4b,20)
s4.shiftPos(60)#flipped AND s1>s
s4a,s4b = CPW_tee(self,s4,w1=15,s1=15,hflip=True)
CPW_straight(self,s4,20)
CPW_straight(self,s4a,30) #branching structure defaults are automatically redefined
CPW_straight(self,s4b,20)
#test left oriented CPW tee
s4a=CPW_tee(self,s4,branch_off=const.LEFT)
CPW_straight(self,s4,30)
CPW_straight(self,s4a,50) #continue off left branch
CPW_straight(self,s4,30)
s4b=CPW_tee(self,s4,branch_off=const.RIGHT)
CPW_straight(self,s4b,50) #continue off right branch
CPW_straight(self,s4,30)
#>>>>>>>>>>> test junction pad functions <<<<<<<<<<<<<<<
# slot functions
s5=m.Structure(self,start=self.centered((100,2800)),direction=-15,defaults={'w':20, 's':10, 'radius':100,'r_out':1.5,'r_ins':1.5})
self.add(dxf.rectangle(s5.getPos((0,0)),-100,13,valign=const.MIDDLE,rotation=s5.direction,bgcolor=w.bg()))
self.add(dxf.rectangle(s5.getPos((8.5,6.5)),-100-8.5,50,rotation=s5.direction,bgcolor=w.bg()))
self.add(dxf.rectangle(s5.getPos((8.5,-6.5)),-100-8.5,-50,rotation=s5.direction,bgcolor=w.bg()))
JContact_slot(self,s5,gapl=1,tabl=2,tabw=2,taboffs=-0.5,hflip=True)
s5.shiftPos(50)
JContact_slot(self,s5,gapl=1,tabl=1,tabw=2,taboffs=1.5)
self.add(dxf.rectangle(s5.getPos((0,0)),100,13,valign=const.MIDDLE,rotation=s5.direction,bgcolor=w.bg()))
self.add(dxf.rectangle(s5.getPos((-9.5,6.5)),100+9.5,50,rotation=s5.direction,bgcolor=w.bg()))
self.add(dxf.rectangle(s5.getPos((-9.5,-6.5)),100+9.5,-50,rotation=s5.direction,bgcolor=w.bg()))
#works without structure as well
JContact_slot(self,self.centered((100,2600)),gapl=1,tabl=1,tabw=2,taboffs=0,r_out=1.5,r_ins=1.5)
self.add(dxf.rectangle(self.centered((109.5,2600)),20,13,valign=const.MIDDLE,bgcolor=w.bg()))
# tab functons
s6=m.Structure(self,start=self.centered((600,2800)),direction=-15,defaults={'w':20, 's':10, 'radius':100,'r_out':1.5,'r_ins':1.0})
self.add(dxf.rectangle(s6.getPos((0,0)),-100,100,valign=const.MIDDLE,rotation=s5.direction,bgcolor=w.bg()))
JContact_tab(self,s6,steml=1,tabw=2,taboffs=-0.5)
s6.shiftPos(40)
JContact_tab(self,s6,steml=1,tabl=1,tabw=2,taboffs=1.5,hflip=True)
self.add(dxf.rectangle(s6.getPos((0,0)),100,100,valign=const.MIDDLE,rotation=s5.direction,bgcolor=w.bg()))
#probe pad functions
s7=m.Structure(self,start=self.centered((1200,2400)),direction=15,defaults={'w':20, 's':10, 'radius':100,'r_out':1.0,'r_ins':1.0})
JSingleProbePad(self,s7,flipped=False)
s7.shiftPos(40)
JSingleProbePad(self,s7,flipped=True,padradius=0)
#one function probe pads
JProbePads(self, self.centered((1200,2000)), rotation=15)
JProbePads(self, self.centered((1200,1600)),rotation=15,tab=True,tabShoulder=True)
#>>>>>>>>>>> test manhattan junction functions <<<<<<<<<<<<<<<
#setupManhattanJAngles(self.wafer,40,True)
for i,ang in enumerate(range(0,140,20)):
jpos =self.centered((2400,800+300*i))
JProbePads(self, jpos,padwidth=100, padradius=15, rotation=ang)
ManhattanJunction(self, jpos,rotation=ang,jpadTaper=6)
self.add(dxf.text(str(ang)+'%%d',vadd(jpos,rotate_2d((-5,40),math.radians(ang))),height=8.0,layer=self.wafer.defaultLayer))
for i,ang in enumerate(range(140,280,20)):
jpos = self.centered((2800,800+300*i))
JProbePads(self, jpos,padwidth=100,padradius=15, rotation=ang)
ManhattanJunction(self, jpos,rotation=ang,jpadTaper=0)
self.add(dxf.text(str(ang)+'%%d',vadd(jpos,rotate_2d((5,40),math.radians(ang))),height=8.0,layer=self.wafer.defaultLayer))
for i,ang in enumerate(range(280,360,20)):
jpos = self.centered((3200,800+300*i))
JProbePads(self, jpos,padwidth=100,padradius=15, rotation=ang)
ManhattanJunction(self, jpos,rotation=ang,jfingerex=-1,jfingerl=4,jpadTaper=6,ucdist=0)
self.add(dxf.text(str(ang)+'%%d',vadd(jpos,rotate_2d((-5,40),math.radians(ang))),height=8.0,layer=self.wafer.defaultLayer))
#>>>>>>>>>>> test qubit functions <<<<<<<<<<<<<<<
CPW_launcher(self,0,l_taper=300,padw=280,pads=140)
CPW_straight(self, 0, 20)
CPW_bend(self, 0, CCW=False,radius=200)
CPW_straight(self,0,1000)
#CPW_bend(self,0,angle=20)
Hamburgermon(self, 0,jfingerw=0.13)
#>>>>>>>>>>> test solid pline functions <<<<<<<<<<<<<<<
pline = SolidPline(self.centered((1000,500)),points = [(0,0)],color=2,bgcolor=2,rotation=30,flags=0)#1
pline.add_vertices([(1000,0),(1000,500),(800,600),(0,600)])
#don't need to close
self.add(pline)
pline = SolidPline(self.centered((300,-600)),points = [(300,-600)],bgcolor=w.bg(),rotation=-30,flags=0)#1
pline.add_vertices([(300,0),(100,400),(0,-600)])
#don't need to close
self.add(pline)
#>>>>>>>>>>> test roundRect functions <<<<<<<<<<<<<<<<<<
self.add(dxf.line(self.centered((-10,2300)),self.centered((210,2300)),color=1))
self.add(RoundRect(self.centered((0,2300)),200,130,radius=40,roundCorners=[1,1,0,1],rotation=15,valign=const.MIDDLE,bgcolor=w.bg()))
self.add(RoundRect(self.centered((-10,2300)),200,130,radius=40,roundCorners=[1,1,0,1],rotation=15,hflip=True,valign=const.MIDDLE,bgcolor=w.bg()))
self.add(RoundRect(self.centered((210,2300)),200,130,radius=40,roundCorners=[1,1,0,1],rotation=15,vflip=True,valign=const.MIDDLE,bgcolor=self.bg()))
#demonstrate skewrect
self.add(SkewRect(self.centered((-1600,-650)),100,80,(20,-30),10,bgcolor=w.bg(),valign=const.MIDDLE))
self.add(dxf.rectangle(self.centered((-1600,-650)),100,80,color=1,valign=const.MIDDLE))
self.add(dxf.line(self.centered((-1600 + 100,-650)),self.centered(( -1600 + 100 +20,-680)),color=2))
#test alignment
self.add(dxf.line(self.centered((-1600,-500)),self.centered((0,-500)),color=1))
self.add(dxf.line(self.centered((-1200,-540)),self.centered((0,-540)),color=1))
self.add(SkewRect(self.centered((-1200,-500)),100,80,(0,-40),20,valign=const.BOTTOM,edgeAlign=const.BOTTOM,bgcolor=w.bg()))
self.add(SkewRect(self.centered((-1000,-500)),100,80,(0,-40),20,valign=const.TOP,edgeAlign=const.TOP,bgcolor=w.bg()))
self.add(SkewRect(self.centered((-800,-500)),100,80,(0,-40),20,valign=const.MIDDLE,edgeAlign=const.MIDDLE,bgcolor=w.bg()))
#test alignment and rotation
self.add(dxf.line(self.centered((-1400,-800)),self.centered((0,-800)),color=1))
self.add(dxf.line(self.centered((-1200,-840)),self.centered((0,-840)),color=1))
self.add(SkewRect(self.centered((-1200,-800)),100,80,(0,-40),20,rotation=30,valign=const.BOTTOM,edgeAlign=const.BOTTOM,bgcolor=w.bg()))
self.add(SkewRect(self.centered((-1000,-800)),100,80,(0,-40),20,rotation=30,valign=const.TOP,edgeAlign=const.TOP,bgcolor=w.bg()))
self.add(SkewRect(self.centered((-800,-800)),100,80,(0,-40),20,rotation=30,valign=const.MIDDLE,edgeAlign=const.MIDDLE,bgcolor=w.bg()))
#curverect testing
self.add(dxf.line(self.centered((-2000,650)),self.centered((-100,650)),color=1))
self.add(CurveRect(self.centered((-2400,650)),80,200,angle=140,rotation=30,bgcolor=2,valign=const.BOTTOM,hflip=True))
self.add(CurveRect(self.centered((-1800,650)),30,60,angle=140,rotation=30,bgcolor=2,valign=const.BOTTOM))
self.add(CurveRect(self.centered((-1800,650)),30,60,angle=140,rotation=30,bgcolor=3,hflip=True,valign=const.TOP))
self.add(CurveRect(self.centered((-1600,650)),30,60,angle=140,rotation=30,valign=const.TOP,vflip=True))
self.add(CurveRect(self.centered((-1400,650)),60,30,ralign=const.TOP,bgcolor=3))
self.add(CurveRect(self.centered((-1400,650)),60,30,ralign=const.TOP,hflip=True,bgcolor=2))
self.add(CurveRect(self.centered((-1200,650)),60,30,angle=200,valign=const.TOP,bgcolor=2))
#cpw bend test
self.add(CurveRect(self.centered((-1000,650)),30,90,angle=140,roffset=15,ralign=const.BOTTOM,rotation=30,vflip=True))
self.add(CurveRect(self.centered((-1000,650)),30,90,angle=140,roffset=15,ralign=const.BOTTOM,rotation=30))
self.add(CurveRect(self.centered((-1000,650)),30,90,angle=140,roffset=-15,ralign=const.TOP,valign=const.TOP,rotation=30,vflip=True))
#inside corner test
self.add(dxf.rectangle(self.centered((-500,0)),1000,100,valign=const.MIDDLE,halign=const.CENTER,bgcolor=w.bg()))
self.add(dxf.rectangle(self.centered((-300,0)),800,100,valign=const.MIDDLE,halign=const.CENTER,rotation=50,bgcolor=w.bg()))
self.add(dxf.rectangle(self.centered((-700,0)),800,100,valign=const.MIDDLE,halign=const.CENTER,rotation=90,bgcolor=w.bg()))
self.add(InsideCurve(self.centered((-750,-50)),50,bgcolor=2))
self.add(InsideCurve(self.centered((-650,-50)),50,bgcolor=2,hflip=True))
self.add(InsideCurve(self.centered((-750,50)),50,bgcolor=2,vflip=True))
self.add(InsideCurve(self.centered((-650,50)),50,bgcolor=2,hflip=True,vflip=True))
x1 = 50/np.tan(np.radians(50))
x2 = 50/np.sin(np.radians(50))
self.add(InsideCurve(self.centered((-300 - x1 - x2,-50)),50,angle=50,bgcolor=2))
self.add(InsideCurve(self.centered((-300 - x1 + x2,-50)),50,angle=130,bgcolor=2,hflip=True))
self.add(InsideCurve(self.centered((-300 + x1 - x2,50)),50,angle=130,bgcolor=2,vflip=True))
self.add(InsideCurve(self.centered((-300 + x1 + x2,50)),50,angle=50,bgcolor=2,hflip=True,vflip=True))
def __init__(self,
wafer,
chipID,
layer,
jfingerw=0.0,
padwidth=150,
padradius=5,
**kwargs):
m.Chip7mm.__init__(self,
wafer,
chipID,
layer,
defaults={
'w': 11,
's': 5,
'radius': 180,
'r_out': 5,
'r_ins': 5
})
#do local p80 ebeam markers
doMirrored(MarkerSquare,
self, (3250, 3250),
80,
layer='EMARKER',
chipCentered=True)
for s in self.structures:
s.shiftPos(340)
'''
#by default the corner structures are angled to match the pads
self.structures[4].shiftPos(0,angle=-45)
#make a reference to structure #4 so we don't confuse it for a variable
s4 = self.structures[4]
'''
#this code is copied closely from Jeronimo's file
s4 = m.Structure(self, self.chipSpace((5883, 1000)), direction=90)
CPW_launcher(self,
s4,
l_taper=400,
padw=234,
pads=100,
l_pad=400,
l_gap=434)
CPW_straight(self, s4, 429)
CPW_taper(self, s4, 10, w0=11, s0=5, w1=11, s1=10.625)
CPW_taper(self, s4, 30, 11, 10.625, 44.75, 10.625)
CPW_taper(self, s4, 10, 44.75, 10.625, 60, 3)
CPW_straight(self, s4, 2790, w=60, s=3)
CPW_bend(self, s4, CCW=False, w=60, s=3)
CPW_straight(self, s4, 200, w=60, s=3)
CPW_bend(self, s4, CCW=False, w=60, s=3)
CPW_straight(self, s4, 1934.5, 60, 3)
CPW_taper(self, s4, 40, w0=60, s0=3, w1=3, s1=47)
CPW_straight(self, s4, 2300, 3, 47)
CPW_bend(self, s4, w=3, s=47)
CPW_straight(self, s4, 200, 3, 47)
CPW_bend(self, s4, w=3, s=47)
CPW_straight(self, s4, 4000, 3, 47)
CPW_bend(self, s4, CCW=False, w=3, s=47)
CPW_straight(self, s4, 200, 3, 47)
CPW_bend(self, s4, CCW=False, w=3, s=47)
CPW_straight(self, s4, 169, 3, 47)
CPW_taper(self, s4, 39.884, 3, 47, 60, 3)
CPW_straight(self, s4, 3800, 60, 3)
CPW_bend(self, s4, w=60, s=3)
CPW_straight(self, s4, 200, w=60, s=3)
CPW_bend(self, s4, w=60, s=3)
CPW_straight(self, s4, 934.5, 60, 3)
CPW_taper(self, s4, 40, 60, 3, 3, 47)
CPW_straight(self, s4, 3300, 3, 47)
CPW_bend(self, s4, CCW=False, w=3, s=47)
CPW_straight(self, s4, 200, 3, 47)
CPW_bend(self, s4, CCW=False, w=3, s=47)
CPW_straight(self, s4, 3934.5, 3, 47)
CPW_taper(self, s4, 50.15, 3, 47, 11, 5)
CPW_bend(self, s4, angle=180, w=11, s=5, radius=210.5)
CPW_straight(self, s4, 361.77, 11, 5)
CPW_taper(self, s4, 100, 11, 5, 59, 26.818) #capacitor
CPW_straight(self, s4, 25, 59, 26.818) #capacitor
Strip_straight(self, s4, 5, 2 * 56.318) #capacitor
CPW_straight(self, s4, 25, 59, 26.818) #capacitor
CPW_taper(self, s4, 100, 59, 26.818, 11, 5)
CPW_straight(self, s4, 1514 + 114.2, 11, 5)
CPW_bend(self, s4, angle=180, CCW=False, w=11, s=5, radius=210.5)
CPW_straight(self, s4, 2175.01, 11, 5)
CPW_bend(self, s4, angle=180, w=11, s=5, radius=210.5)
CPW_straight(self, s4, 3098, 11, 5)
Hamburgermon(self,
s4,
qbunthick=120,
qbunr=59.9,
qccap_padl=170,
qccapl=120,
jfingerw=jfingerw,
**kwargs)
#this is for the test junctions on the left
#cutout
self.add(
RoundRect(self.chipSpace((650, 2375)),
670,
2275 + 300,
1,
valign=const.MIDDLE)
) #note we are purposefully not setting the bgcolor
#contact pads
for y in range(5):
for x in range(2):
JProbePads(self,
self.chipSpace(
(830 + 300 * x, 3180 + 170 - 500 * y)),
rotation=90,
padwidth=padwidth,
padradius=padradius,
layer=self.wafer.XLAYER,
**kwargs)
ManhattanJunction(self,
self.chipSpace(
(830 + 300 * x, 3180 + 170 - 500 * y)),
rotation=90,
jfingerw=jfingerw,
**kwargs)
def __init__(self,
wafer,
chipID,
layer,
left=False,
right=False,
defaults=None,
structures=None,
l_waveguide=870,
h_waveguide=1270,
r_waveguide=400,
slot_width=2270,
slot_height=2110,
r_slot=400,
**kwargs):
m.Chip.__init__(self, wafer, chipID, layer)
self.defaults = {'s': 80, 'radius': 25, 'r_out': 0, 'r_ins': 0}
if defaults is not None:
#self.defaults = defaults.copy()
for d in defaults:
self.defaults[d] = defaults[d]
if structures is not None:
#override default structures
self.structures = structures
else:
self.structures = [ #hardwired structures
m.Structure(self,
start=(0, self.height / 2),
direction=0,
defaults=self.defaults),
m.Structure(self,
start=(self.width, self.height / 2),
direction=180,
defaults=self.defaults)
]
if wafer.frame:
self.add(
RoundRect(self.centered((-self.width / 2, 0)),
l_waveguide,
h_waveguide,
r_waveguide,
roundCorners=[0, 1, 1, 0],
valign=const.MIDDLE,
layer=wafer.lyr('FRAME')))
self.add(
RoundRect(self.centered((self.width / 2, 0)),
l_waveguide,
h_waveguide,
r_waveguide,
roundCorners=[1, 0, 0, 1],
halign=const.RIGHT,
valign=const.MIDDLE,
layer=wafer.lyr('FRAME')))
self.add(
RoundRect(self.center,
slot_width,
slot_height,
r_slot,
halign=const.CENTER,
valign=const.MIDDLE,
layer=wafer.lyr('FRAME')))
if left:
Slot_vivaldi_taper(self, 0, **kwargs)
if right:
Slot_vivaldi_taper(self, 1, **kwargs)