def cal_fast_pi(name, mult=1):
m = pulsar_mbi_espin.ElectronRabiSplitMultElements('cal_fast_pi_' + name +
'_M=%d' % mult)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 500
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) * mult
m.params['MW_pulse_delays'] = np.ones(pts) * 15e-6
# hard pi pulses
m.params['MW_pulse_durations'] = np.ones(
pts) * m.params['fast_pi_duration']
m.params['MW_pulse_amps'] = np.linspace(0.7, 0.9, pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_pi2pi_pi_mI0(name, mult=1):
m = pulsar_mbi_espin.ElectronRabiSplitMultElements(
'cal_pi2pi_pi_mI0_'+name+'_M=%d' % mult)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) * mult
m.params['MW_pulse_delays'] = np.ones(pts) * 15e-6
# MBI is in mI = 0 here
# some msmts use mod, others ssbmod (haven't found the mistake yet.) set both.
m.params['AWG_MBI_MW_pulse_mod_frq'] = m.params['pi2pi_mI0_mod_frq']
m.params['AWG_MBI_MW_pulse_ssbmod_frq'] = m.params['pi2pi_mI0_mod_frq']
# hard pi pulses
m.params['MW_pulse_durations'] = np.ones(pts) * 396e-9
m.params['MW_pulse_amps'] = np.linspace(0.095,0.12,pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_pi2pi_pi_mI0(name, mult=1):
m = pulsar_mbi_espin.ElectronRabiSplitMultElements('cal_pi2pi_pi_mI0_' +
name + '_M=%d' % mult)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) * mult
m.params['MW_pulse_delays'] = np.ones(pts) * 15e-6
# MBI is in mI = 0 here
# some msmts use mod, others ssbmod (haven't found the mistake yet.) set both.
m.params['AWG_MBI_MW_pulse_mod_frq'] = m.params['pi2pi_mI0_mod_frq']
m.params['AWG_MBI_MW_pulse_ssbmod_frq'] = m.params['pi2pi_mI0_mod_frq']
# hard pi pulses
m.params['MW_pulse_durations'] = np.ones(pts) * 396e-9
m.params['MW_pulse_amps'] = np.linspace(0.095, 0.12, pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_fast_pi(name, mult=1):
m = pulsar_mbi_espin.ElectronRabiSplitMultElements('cal_fast_pi_' + name +
'_M=%d' % mult)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 500
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) * mult
m.params['MW_pulse_delays'] = np.ones(pts) * 15e-6
# hard pi pulses
m.params['MW_pulse_durations'] = np.ones(
pts) * m.params['fast_pi_duration']
m.params['MW_pulse_amps'] = np.linspace(0.7, 0.9, pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def calibrate_MBI_fidelity(name):
m = MBIFidelity(name)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO'])
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 4
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 10000
# MW pulses
m.params['max_MBI_attempts'] = 100
m.params[
'N_randomize_duration'] = 50 # This could still be optimized, 50 is a guess
m.params[
'Ex_N_randomize_amplitude'] = 15e-9 # 10 nW is a guess, not optimized
m.params[
'A_N_randomize_amplitude'] = 20e-9 # 10 nW is a guess, not optimized
m.params['repump_N_randomize_amplitude'] = 0
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 2000e-9
MIM1_AMP = 0.005182
MI0_AMP = 0.005015
MIP1_AMP = 0.005009
m.params['MW_pulse_durations'] = np.ones(
pts) * 8.3e-6 # the four readout pulse durations
m.params['MW_pulse_amps'] = np.array(
[MIM1_AMP, MI0_AMP, MIP1_AMP,
0.]) # calibrated powers for equal-length pi-pulses
# Assume for now that we're initializing into m_I = -1 (no other nuclear spins)
f_m1 = m.params['AWG_MBI_MW_pulse_mod_frq']
f_HF = m.params['N_HF_frq']
m.params['MW_pulse_mod_frqs'] = f_m1 + np.array([0, 1, 2, 5]) * f_HF
# for the autoanalysis
m.params['sweep_name'] = 'Readout transitions'
m.params['sweep_pts'] = m.params['MW_pulse_mod_frqs']
m.params['sweep_pt_names'] = [
'$m_I = -1$', '$m_I = 0$', '$m_I = +1$', 'None'
]
funcs.finish(m, debug=False, upload=UPLOAD)
def calibrate_MBI_fidelity(name):
m = MBIFidelity(name)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO'])
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 4
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 10000
# MW pulses
m.params['max_MBI_attempts'] = 100
m.params[
'N_randomize_duration'] = 50 # This could still be optimized, 50 is a guess
m.params[
'Ex_N_randomize_amplitude'] = 15e-9 # 10 nW is a guess, not optimized
m.params[
'A_N_randomize_amplitude'] = 20e-9 # 10 nW is a guess, not optimized
m.params['repump_N_randomize_amplitude'] = 0
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 2000e-9
MIM1_AMP = 0.005182
MI0_AMP = 0.005015
MIP1_AMP = 0.005009
m.params['MW_pulse_durations'] = np.ones(
pts) * 8.3e-6 # the four readout pulse durations
m.params['MW_pulse_amps'] = np.array(
[MIM1_AMP, MI0_AMP, MIP1_AMP,
0.]) # calibrated powers for equal-length pi-pulses
# Assume for now that we're initializing into m_I = -1 (no other nuclear spins)
f_m1 = m.params['AWG_MBI_MW_pulse_mod_frq']
f_HF = m.params['N_HF_frq']
m.params['MW_pulse_mod_frqs'] = f_m1 + np.array([0, 1, 2, 5]) * f_HF
# for the autoanalysis
m.params['sweep_name'] = 'Readout transitions'
m.params['sweep_pts'] = m.params['MW_pulse_mod_frqs']
m.params['sweep_pt_names'] = [
'$m_I = -1$', '$m_I = 0$', '$m_I = +1$', 'None'
]
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_CORPSE_pi(name , mult=1):
m = CORPSE_calibration.CORPSEPiCalibration(name+'_M=%d' % mult)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
# sweep params
m.params['CORPSE_pi_sweep_amps'] = np.linspace(0.49, 0.56, pts)
m.params['multiplicity'] = mult
m.params['delay_reps'] = 15
# for the autoanalysis
m.params['sweep_name'] = 'CORPSE amplitude (V)'
m.params['sweep_pts'] = m.params['CORPSE_pi_sweep_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_CORPSE_pi(name, mult=1):
m = CORPSE_calibration.CORPSEPiCalibration(name + '_M=%d' % mult)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
# sweep params
m.params['CORPSE_pi_sweep_amps'] = np.linspace(0.49, 0.56, pts)
m.params['multiplicity'] = mult
m.params['delay_reps'] = 15
# for the autoanalysis
m.params['sweep_name'] = 'CORPSE amplitude (V)'
m.params['sweep_pts'] = m.params['CORPSE_pi_sweep_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_fast_pi2(name):
m = pi2_calibration.Pi2Calibration('cal_fast_pi_over_2_' + name)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['reps_per_ROsequence'] = 3000
m.params['pts_awg'] = pts
m.params['pts'] = 2 * pts
sweep_axis = np.linspace(0.65, 0.9, pts)
# pulses
m.params['pi2_sweep_amps'] = sweep_axis
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = np.sort(np.append(sweep_axis, sweep_axis))
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_fast_pi2(name):
m = pi2_calibration.Pi2Calibration('cal_fast_pi_over_2_' + name)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['reps_per_ROsequence'] = 3000
m.params['pts_awg'] = pts
m.params['pts'] = 2 * pts
sweep_axis = np.linspace(0.65, 0.9, pts)
# pulses
m.params['pi2_sweep_amps'] = sweep_axis
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = np.sort(np.append(sweep_axis, sweep_axis))
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_slow_pi(name):
m = pulsar_mbi_espin.ElectronRabi('cal_slow_pi_'+name)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['reps_per_ROsequence'] = 500
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 1e-9
# slow pi pulses
m.params['MW_pulse_durations'] = np.ones(pts) * 2500e-9
m.params['MW_pulse_amps'] = np.linspace(0,0.03,pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amp (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_fast_rabi(name):
m = pulsar_mbi_espin.ElectronRabi('cal_fast_rabi'+name)
m.params.from_dict(qt.cfgman['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 21
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 20e-9
# MW pulses
m.params['MW_pulse_durations'] = np.linspace(0,500e-9,pts) + 5e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.4
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_slow_pi(name):
m = pulsar_mbi_espin.ElectronRabi('cal_slow_pi_' + name)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['reps_per_ROsequence'] = 500
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 1e-9
# slow pi pulses
m.params['MW_pulse_durations'] = np.ones(pts) * 2500e-9
m.params['MW_pulse_amps'] = np.linspace(0, 0.03, pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amp (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_fast_rabi(name):
m = pulsar_mbi_espin.ElectronRabi('cal_fast_rabi' + name)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 21
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 20e-9
# MW pulses
m.params['MW_pulse_durations'] = np.linspace(0, 500e-9, pts) + 5e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.4
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m, debug=False, upload=UPLOAD)