def addOperatorsNotGlobalMaster(self):
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5, .5, .5)
# pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
self.addOperatorsIkTwist()
# Division -----------------------------------------
rootWorld_node = node.createDecomposeMatrixNode(self.root.attr("worldMatrix"))
for i in range(len(self.guide.apos)):
self.addFkOperator(i, rootWorld_node, crv_node)
# CONNECT STACK
# master components
mstr_global = self.settings["masterChainGlobal"]
mstr_local = self.settings["masterChainLocal"]
if mstr_global:
mstr_global = self.rig.components[mstr_global]
if mstr_local:
mstr_local = self.rig.components[mstr_local]
# connect global IK
if mstr_global:
for e, _ in enumerate(self.ik_ctl):
# connect in global
self.connect_master(mstr_global.ik_global_out,
self.ik_global_in,
e,
self.settings["cnxOffset"])
# connect in local
if mstr_local:
for e, _ in enumerate(self.ik_ctl):
self.connect_master(mstr_local.ik_ctl,
self.ik_local_in,
e,
self.settings["cnxOffset"])
for e, _ in enumerate(self.fk_ctl):
self.connect_master(mstr_local.fk_ctl,
self.fk_local_in,
e,
self.settings["cnxOffset"])
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Auto bend ----------------------------
if self.settings["autoBend"]:
mul_node = node.createMulNode(
[self.autoBendChain[0].ry, self.autoBendChain[0].rz],
[self.sideBend_att, self.frontBend_att])
mul_node.outputX >> self.ik1autoRot_lvl.rz
mul_node.outputY >> self.ik1autoRot_lvl.rx
self.ikHandleAutoBend = primitive.addIkHandle(
self.autoBend_ctl, self.getName("ikHandleAutoBend"),
self.autoBendChain, "ikSCsolver")
# Tangent position ---------------------------------
# common part
d = vector.getDistance(self.guide.apos[0], self.guide.apos[-1])
dist_node = node.createDistNode(self.ik0_ctl, self.ik1_ctl)
rootWorld_node = node.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = node.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = node.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = node.createMulNode(self.tan0_att,
self.tan0_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan0_npo.attr("ty"))
# tan1
mul_node = node.createMulNode(self.tan1_att,
self.tan1_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan1_npo.attr("ty"))
# Tangent Mid --------------------------------------
if self.settings["centralTangent"]:
tanIntMat = applyop.gear_intmatrix_op(
self.tan0_npo.attr("worldMatrix"),
self.tan1_npo.attr("worldMatrix"), .5)
applyop.gear_mulmatrix_op(
tanIntMat.attr("output"),
self.tan_npo.attr("parentInverseMatrix[0]"), self.tan_npo)
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan0_off.attr("translate"))
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan1_off.attr("translate"))
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5,
.5, .5)
pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
if i == 0: # we add extra 10% to the first vertebra
u = (1.0 / (self.settings["division"] - 1.0)) / 10
cns = applyop.pathCns(self.div_cns[i], self.slv_crv, False, u,
True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 0) # front axis is 'X'
# Roll
intMatrix = applyop.gear_intmatrix_op(
self.ik0_ctl + ".worldMatrix", self.ik1_ctl + ".worldMatrix",
u)
dm_node = node.createDecomposeMatrixNode(intMatrix + ".output")
pm.connectAttr(dm_node + ".outputRotate",
self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i],
self.ref_twist[i],
maintainOffset=True)
pm.connectAttr(self.ref_twist[i] + ".translate",
cns + ".worldUpVector")
# compensate scale reference
div_node = node.createDivNode([1, 1, 1], [
rootWorld_node + ".outputScaleX", rootWorld_node +
".outputScaleY", rootWorld_node + ".outputScaleZ"
])
# Squash n Stretch
op = applyop.gear_squashstretch2_op(self.scl_transforms[i],
self.root,
pm.arclen(self.slv_crv), "y",
div_node + ".output")
pm.connectAttr(self.volume_att, op + ".blend")
pm.connectAttr(crv_node + ".arcLength", op + ".driver")
pm.connectAttr(self.st_att[i], op + ".stretch")
pm.connectAttr(self.sq_att[i], op + ".squash")
# Controlers
if i == 0:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.root.attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(mulmat_node +
".output")
pm.connectAttr(dm_node + ".outputTranslate",
self.fk_npo[i].attr("t"))
else:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(mulmat_node +
".output")
mul_node = node.createMulNode(div_node + ".output",
dm_node + ".outputTranslate")
pm.connectAttr(mul_node + ".output", self.fk_npo[i].attr("t"))
pm.connectAttr(dm_node + ".outputRotate", self.fk_npo[i].attr("r"))
# Orientation Lock
if i == 0:
dm_node = node.createDecomposeMatrixNode(self.ik0_ctl +
".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"], self.lock_ori0_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
elif i == self.settings["division"] - 1:
dm_node = node.createDecomposeMatrixNode(self.ik1_ctl +
".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"], self.lock_ori1_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
# Connections (Hooks) ------------------------------
pm.parentConstraint(self.hip_lvl, self.cnx0)
pm.scaleConstraint(self.hip_lvl, self.cnx0)
pm.parentConstraint(self.scl_transforms[-1], self.cnx1)
pm.scaleConstraint(self.scl_transforms[-1], self.cnx1)
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Tangent position ---------------------------------
# common part
d = vector.getDistance(self.guide.pos["root"], self.guide.pos["neck"])
dist_node = node.createDistNode(self.root, self.ik_ctl)
rootWorld_node = node.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = node.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = node.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = node.createMulNode(self.tan0_att,
self.tan0_loc.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan0_loc + ".ty")
# tan1
mul_node = node.createMulNode(self.tan1_att,
self.tan1_loc.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan1_loc.attr("ty"))
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5,
0.5, 0.5)
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.divisions):
# References
u = i / (self.divisions - 1.0)
cns = applyop.pathCns(self.div_cns[i], self.slv_crv, False, u,
True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 2) # front axis is 'Z'
# Roll
intMatrix = applyop.gear_intmatrix_op(
self.intMRef + ".worldMatrix", self.ik_ctl + ".worldMatrix", u)
dm_node = node.createDecomposeMatrixNode(intMatrix + ".output")
pm.connectAttr(dm_node + ".outputRotate",
self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i],
self.ref_twist[i],
maintainOffset=True)
pm.connectAttr(self.ref_twist[i] + ".translate",
cns + ".worldUpVector")
# Squash n Stretch
op = applyop.gear_squashstretch2_op(self.fk_npo[i], self.root,
pm.arclen(self.slv_crv), "y")
pm.connectAttr(self.volume_att, op + ".blend")
pm.connectAttr(crv_node + ".arcLength", op + ".driver")
pm.connectAttr(self.st_att[i], op + ".stretch")
pm.connectAttr(self.sq_att[i], op + ".squash")
op.setAttr("driver_min", 0.1)
# scl compas
if i != 0:
div_node = node.createDivNode(
[1, 1, 1],
[
self.fk_npo[i - 1] + ".sx",
self.fk_npo[i - 1] + ".sy",
self.fk_npo[i - 1] + ".sz",
],
)
pm.connectAttr(div_node + ".output",
self.scl_npo[i] + ".scale")
# Controlers
if i == 0:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.root.attr("worldInverseMatrix"),
)
else:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"),
)
dm_node = node.createDecomposeMatrixNode(mulmat_node + ".output")
pm.connectAttr(dm_node + ".outputTranslate",
self.fk_npo[i].attr("t"))
pm.connectAttr(dm_node + ".outputRotate", self.fk_npo[i].attr("r"))
# Orientation Lock
if i == self.divisions - 1:
dm_node = node.createDecomposeMatrixNode(self.ik_ctl +
".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"],
self.lock_ori_att,
)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
# Head ---------------------------------------------
self.fk_ctl[-1].addChild(self.head_cns)
# scale compensation
dm_node = node.createDecomposeMatrixNode(self.scl_npo[0] +
".parentInverseMatrix")
pm.connectAttr(dm_node + ".outputScale", self.scl_npo[0] + ".scale")
def _addCurveDetailControllers(self, t, crv, name, skipHeadAndTail=False):
controls = []
cvs = crv.getCVs(space="world")
crv_info = node.createCurveInfoNode(crv)
if self.negate:
pass
# cvs = [cv for cv in reversed(cvs)]
# aim constrain targets and joints
icon_shape = "sphere"
color = 4
wd = .3
offset = self.offset * 0.3
for i, cv in enumerate(cvs):
if skipHeadAndTail and i == 0:
continue
if skipHeadAndTail and (i == len(cvs) - 1):
continue
# aim targets
trn_name = self.getName("{}_aimTarget{}".format(name, i))
trn = primitive.addTransformFromPos(self.eyeTargets_root, trn_name, pos=cv)
# connecting positions with crv
pm.connectAttr(crv_info + ".controlPoints[%s]" % str(i), trn.attr("translate"))
# joints
xform = setMatrixPosition(t, self.bboxCenter)
npo_name = self.getName("{}_jnt_base{}".format(name, str(i)))
npo = addTransform(self.jnt_root, npo_name, xform)
applyop.aimCns(npo, trn, axis="zy", wupObject=self.jnt_root)
xform = setMatrixPosition(t, cv)
npo_name = self.getName("{}_jnt{}_npo".format(name, str(i)))
npo = addTransform(npo, npo_name, xform)
ctl_name = "%s_crvdetail%s_%s" % (name, i, self.ctlName)
ctl = self.addCtl(
npo,
ctl_name,
xform,
color,
icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=offset
)
self.addToSubGroup(ctl, self.detailControllersGroupName)
controls.append(ctl)
jnt_name = "{}{}".format(name, i)
self.jnt_pos.append([ctl, jnt_name])
return controls
def eyeRig(eyeMesh,
edgeLoop,
blinkH,
namePrefix,
offset,
rigidLoops,
falloffLoops,
headJnt,
doSkin,
parent=None,
ctlName="ctl",
sideRange=False,
customCorner=False,
intCorner=None,
extCorner=None,
ctlGrp=None,
defGrp=None):
"""Create eyelid and eye rig
Args:
eyeMesh (TYPE): Description
edgeLoop (TYPE): Description
blinkH (TYPE): Description
namePrefix (TYPE): Description
offset (TYPE): Description
rigidLoops (TYPE): Description
falloffLoops (TYPE): Description
headJnt (TYPE): Description
doSkin (TYPE): Description
parent (None, optional): Description
ctlName (str, optional): Description
sideRange (bool, optional): Description
customCorner (bool, optional): Description
intCorner (None, optional): Description
extCorner (None, optional): Description
ctlGrp (None, optional): Description
defGrp (None, optional): Description
Returns:
TYPE: Description
"""
# Checkers
if edgeLoop:
edgeLoopList = [pm.PyNode(e) for e in edgeLoop.split(",")]
else:
pm.displayWarning("Please set the edge loop first")
return
if eyeMesh:
try:
eyeMesh = pm.PyNode(eyeMesh)
except pm.MayaNodeError:
pm.displayWarning("The object %s can not be found in the "
"scene" % (eyeMesh))
return
else:
pm.displayWarning("Please set the eye mesh first")
if doSkin:
if not headJnt:
pm.displayWarning("Please set the Head Jnt or unCheck "
"Compute Topological Autoskin")
return
# Initial Data
bboxCenter = meshNavigation.bboxCenter(eyeMesh)
extr_v = meshNavigation.getExtremeVertexFromLoop(edgeLoopList, sideRange)
upPos = extr_v[0]
lowPos = extr_v[1]
inPos = extr_v[2]
outPos = extr_v[3]
edgeList = extr_v[4]
vertexList = extr_v[5]
# Detect the side L or R from the x value
if inPos.getPosition(space='world')[0] < 0.0:
side = "R"
inPos = extr_v[3]
outPos = extr_v[2]
normalPos = outPos
npw = normalPos.getPosition(space='world')
normalVec = npw - bboxCenter
else:
side = "L"
normalPos = outPos
npw = normalPos.getPosition(space='world')
normalVec = bboxCenter - npw
# Manual Vertex corners
if customCorner:
if intCorner:
try:
if side == "R":
inPos = pm.PyNode(extCorner)
else:
inPos = pm.PyNode(intCorner)
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % intCorner)
return
else:
pm.displayWarning("Please set the internal eyelid corner")
return
if extCorner:
try:
normalPos = pm.PyNode(extCorner)
npw = normalPos.getPosition(space='world')
if side == "R":
outPos = pm.PyNode(intCorner)
normalVec = npw - bboxCenter
else:
outPos = pm.PyNode(extCorner)
normalVec = bboxCenter - npw
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % extCorner)
return
else:
pm.displayWarning("Please set the external eyelid corner")
return
# Check if we have prefix:
if namePrefix:
namePrefix = string.removeInvalidCharacter(namePrefix)
else:
pm.displayWarning("Prefix is needed")
return
def setName(name, ind=None):
namesList = [namePrefix, side, name]
if ind is not None:
namesList[1] = side + str(ind)
name = "_".join(namesList)
return name
if pm.ls(setName("root")):
pm.displayWarning("The object %s already exist in the scene. Please "
"choose another name prefix" % setName("root"))
return
# Eye root
eye_root = primitive.addTransform(None, setName("root"))
eyeCrv_root = primitive.addTransform(eye_root, setName("crvs"))
# Eyelid Main crvs
try:
upEyelid = meshNavigation.edgeRangeInLoopFromMid(
edgeList, upPos, inPos, outPos)
upCrv = curve.createCurveFromOrderedEdges(upEyelid,
inPos,
setName("upperEyelid"),
parent=eyeCrv_root)
upCrv_ctl = curve.createCurveFromOrderedEdges(upEyelid,
inPos,
setName("upCtl_crv"),
parent=eyeCrv_root)
pm.rebuildCurve(upCrv_ctl, s=2, rt=0, rpo=True, ch=False)
lowEyelid = meshNavigation.edgeRangeInLoopFromMid(
edgeList, lowPos, inPos, outPos)
lowCrv = curve.createCurveFromOrderedEdges(lowEyelid,
inPos,
setName("lowerEyelid"),
parent=eyeCrv_root)
lowCrv_ctl = curve.createCurveFromOrderedEdges(lowEyelid,
inPos,
setName("lowCtl_crv"),
parent=eyeCrv_root)
pm.rebuildCurve(lowCrv_ctl, s=2, rt=0, rpo=True, ch=False)
except UnboundLocalError:
if customCorner:
pm.displayWarning("This error is maybe caused because the custom "
"Corner vertex is not part of the edge loop")
pm.displayError(traceback.format_exc())
return
upBlink = curve.createCurveFromCurve(upCrv,
setName("upblink_crv"),
nbPoints=30,
parent=eyeCrv_root)
lowBlink = curve.createCurveFromCurve(lowCrv,
setName("lowBlink_crv"),
nbPoints=30,
parent=eyeCrv_root)
upTarget = curve.createCurveFromCurve(upCrv,
setName("upblink_target"),
nbPoints=30,
parent=eyeCrv_root)
lowTarget = curve.createCurveFromCurve(lowCrv,
setName("lowBlink_target"),
nbPoints=30,
parent=eyeCrv_root)
midTarget = curve.createCurveFromCurve(lowCrv,
setName("midBlink_target"),
nbPoints=30,
parent=eyeCrv_root)
rigCrvs = [
upCrv, lowCrv, upCrv_ctl, lowCrv_ctl, upBlink, lowBlink, upTarget,
lowTarget, midTarget
]
for crv in rigCrvs:
crv.attr("visibility").set(False)
# localBBOX
localBBox = eyeMesh.getBoundingBox(invisible=True, space='world')
wRadius = abs((localBBox[0][0] - localBBox[1][0]))
dRadius = abs((localBBox[0][1] - localBBox[1][1]) / 1.7)
# Groups
if not ctlGrp:
ctlGrp = "rig_controllers_grp"
try:
ctlSet = pm.PyNode(ctlGrp)
except pm.MayaNodeError:
pm.sets(n=ctlGrp, em=True)
ctlSet = pm.PyNode(ctlGrp)
if not defGrp:
defGrp = "rig_deformers_grp"
try:
defset = pm.PyNode(defGrp)
except pm.MayaNodeError:
pm.sets(n=defGrp, em=True)
defset = pm.PyNode(defGrp)
# Calculate center looking at
averagePosition = (
(upPos.getPosition(space='world') + lowPos.getPosition(space='world') +
inPos.getPosition(space='world') + outPos.getPosition(space='world'))
/ 4)
if side == "R":
negate = False
offset = offset
over_offset = dRadius
else:
negate = False
over_offset = dRadius
if side == "R" and sideRange or side == "R" and customCorner:
axis = "z-x"
# axis = "zx"
else:
axis = "z-x"
t = transform.getTransformLookingAt(bboxCenter,
averagePosition,
normalVec,
axis=axis,
negate=negate)
over_npo = primitive.addTransform(eye_root, setName("center_lookatRoot"),
t)
over_ctl = icon.create(over_npo,
setName("over_%s" % ctlName),
t,
icon="square",
w=wRadius,
d=dRadius,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, over_offset),
color=4)
node.add_controller_tag(over_ctl)
attribute.add_mirror_config_channels(over_ctl)
attribute.setKeyableAttributes(
over_ctl,
params=["tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz"])
if side == "R":
over_npo.attr("rx").set(over_npo.attr("rx").get() * -1)
over_npo.attr("ry").set(over_npo.attr("ry").get() + 180)
over_npo.attr("sz").set(-1)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=over_ctl)
center_lookat = primitive.addTransform(over_ctl, setName("center_lookat"),
t)
# Tracking
# Eye aim control
t_arrow = transform.getTransformLookingAt(bboxCenter,
averagePosition,
upPos.getPosition(space='world'),
axis="zy",
negate=False)
radius = abs((localBBox[0][0] - localBBox[1][0]) / 1.7)
arrow_npo = primitive.addTransform(eye_root, setName("aim_npo"), t_arrow)
arrow_ctl = icon.create(arrow_npo,
setName("aim_%s" % ctlName),
t_arrow,
icon="arrow",
w=1,
po=datatypes.Vector(0, 0, radius),
color=4)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=arrow_ctl)
attribute.setKeyableAttributes(arrow_ctl, params=["rx", "ry", "rz"])
# tracking custom trigger
if side == "R":
tt = t_arrow
else:
tt = t
aimTrigger_root = primitive.addTransform(center_lookat,
setName("aimTrigger_root"), tt)
aimTrigger_lvl = primitive.addTransform(aimTrigger_root,
setName("aimTrigger_lvl"), tt)
aimTrigger_lvl.attr("tz").set(1.0)
aimTrigger_ref = primitive.addTransform(aimTrigger_lvl,
setName("aimTrigger_ref"), tt)
aimTrigger_ref.attr("tz").set(0.0)
# connect trigger with arrow_ctl
pm.parentConstraint(arrow_ctl, aimTrigger_ref, mo=True)
# Controls lists
upControls = []
trackLvl = []
# upper eyelid controls
upperCtlNames = ["inCorner", "upInMid", "upMid", "upOutMid", "outCorner"]
cvs = upCrv_ctl.getCVs(space="world")
if side == "R" and not sideRange:
# if side == "R":
cvs = [cv for cv in reversed(cvs)]
for i, cv in enumerate(cvs):
if utils.is_odd(i):
color = 14
wd = .5
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = .7
icon_shape = "square"
params = [
"tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz"
]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % upperCtlNames[i]), t)
npoBase = npo
if i == 2:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(npo,
setName("%s_trk" % upperCtlNames[i]),
t)
trackLvl.append(npo)
ctl = icon.create(npo,
setName("%s_%s" % (upperCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color)
attribute.add_mirror_config_channels(ctl)
node.add_controller_tag(ctl, over_ctl)
upControls.append(ctl)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl)
attribute.setKeyableAttributes(ctl, params)
if side == "R":
npoBase.attr("ry").set(180)
npoBase.attr("sz").set(-1)
# adding parent average contrains to odd controls
for i, ctl in enumerate(upControls):
if utils.is_odd(i):
cns_node = pm.parentConstraint(upControls[i - 1],
upControls[i + 1],
ctl.getParent(),
mo=True)
# Make the constraint "noFlip"
cns_node.interpType.set(0)
# lower eyelid controls
lowControls = [upControls[0]]
lowerCtlNames = [
"inCorner", "lowInMid", "lowMid", "lowOutMid", "outCorner"
]
cvs = lowCrv_ctl.getCVs(space="world")
if side == "R" and not sideRange:
cvs = [cv for cv in reversed(cvs)]
for i, cv in enumerate(cvs):
# we skip the first and last point since is already in the uper eyelid
if i in [0, 4]:
continue
if utils.is_odd(i):
color = 14
wd = .5
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = .7
icon_shape = "square"
params = [
"tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz"
]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % lowerCtlNames[i]), t)
npoBase = npo
if i == 2:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(npo,
setName("%s_trk" % lowerCtlNames[i]),
t)
trackLvl.append(npo)
ctl = icon.create(npo,
setName("%s_%s" % (lowerCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color)
attribute.add_mirror_config_channels(ctl)
lowControls.append(ctl)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl)
attribute.setKeyableAttributes(ctl, params)
# mirror behaviout on R side controls
if side == "R":
npoBase.attr("ry").set(180)
npoBase.attr("sz").set(-1)
for lctl in reversed(lowControls[1:]):
node.add_controller_tag(lctl, over_ctl)
lowControls.append(upControls[-1])
# adding parent average contrains to odd controls
for i, ctl in enumerate(lowControls):
if utils.is_odd(i):
cns_node = pm.parentConstraint(lowControls[i - 1],
lowControls[i + 1],
ctl.getParent(),
mo=True)
# Make the constraint "noFlip"
cns_node.interpType.set(0)
# Connecting control crvs with controls
applyop.gear_curvecns_op(upCrv_ctl, upControls)
applyop.gear_curvecns_op(lowCrv_ctl, lowControls)
# adding wires
w1 = pm.wire(upCrv, w=upBlink)[0]
w2 = pm.wire(lowCrv, w=lowBlink)[0]
w3 = pm.wire(upTarget, w=upCrv_ctl)[0]
w4 = pm.wire(lowTarget, w=lowCrv_ctl)[0]
# adding blendshapes
bs_upBlink = pm.blendShape(upTarget,
midTarget,
upBlink,
n="blendShapeUpBlink")
bs_lowBlink = pm.blendShape(lowTarget,
midTarget,
lowBlink,
n="blendShapeLowBlink")
bs_mid = pm.blendShape(lowTarget,
upTarget,
midTarget,
n="blendShapeLowBlink")
# setting blendshape reverse connections
rev_node = pm.createNode("reverse")
pm.connectAttr(bs_upBlink[0].attr(midTarget.name()), rev_node + ".inputX")
pm.connectAttr(rev_node + ".outputX", bs_upBlink[0].attr(upTarget.name()))
rev_node = pm.createNode("reverse")
pm.connectAttr(bs_lowBlink[0].attr(midTarget.name()), rev_node + ".inputX")
pm.connectAttr(rev_node + ".outputX",
bs_lowBlink[0].attr(lowTarget.name()))
rev_node = pm.createNode("reverse")
pm.connectAttr(bs_mid[0].attr(upTarget.name()), rev_node + ".inputX")
pm.connectAttr(rev_node + ".outputX", bs_mid[0].attr(lowTarget.name()))
# setting default values
bs_mid[0].attr(upTarget.name()).set(blinkH)
# joints root
jnt_root = primitive.addTransformFromPos(eye_root,
setName("joints"),
pos=bboxCenter)
# head joint
if headJnt:
try:
headJnt = pm.PyNode(headJnt)
jnt_base = headJnt
except pm.MayaNodeError:
pm.displayWarning("Aborted can not find %s " % headJnt)
return
else:
# Eye root
jnt_base = jnt_root
eyeTargets_root = primitive.addTransform(eye_root, setName("targets"))
eyeCenter_jnt = rigbits.addJnt(arrow_ctl,
jnt_base,
grp=defset,
jntName=setName("center_jnt"))
# Upper Eyelid joints ##################################################
cvs = upCrv.getCVs(space="world")
upCrv_info = node.createCurveInfoNode(upCrv)
# aim constrain targets and joints
upperEyelid_aimTargets = []
upperEyelid_jnt = []
upperEyelid_jntRoot = []
for i, cv in enumerate(cvs):
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("upEyelid_aimTarget", i),
pos=cv)
upperEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(upCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("upEyelid_jnt_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(.08)
jntRoot.attr("visibility").set(False)
upperEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot, trn, axis="zy", wupObject=jnt_root)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("upEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("upEyelid_jnt", i))
upperEyelid_jnt.append(jnt)
# Lower Eyelid joints ##################################################
cvs = lowCrv.getCVs(space="world")
lowCrv_info = node.createCurveInfoNode(lowCrv)
# aim constrain targets and joints
lowerEyelid_aimTargets = []
lowerEyelid_jnt = []
lowerEyelid_jntRoot = []
for i, cv in enumerate(cvs):
if i in [0, len(cvs) - 1]:
continue
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("lowEyelid_aimTarget", i),
pos=cv)
lowerEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(lowCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("lowEyelid_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(.08)
jntRoot.attr("visibility").set(False)
lowerEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot, trn, axis="zy", wupObject=jnt_root)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("lowEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("lowEyelid_jnt", i))
lowerEyelid_jnt.append(jnt)
# Channels
# Adding and connecting attributes for the blink
up_ctl = upControls[2]
blink_att = attribute.addAttribute(over_ctl,
"blink",
"float",
0,
minValue=0,
maxValue=1)
blinkMult_att = attribute.addAttribute(over_ctl,
"blinkMult",
"float",
1,
minValue=1,
maxValue=2)
midBlinkH_att = attribute.addAttribute(over_ctl,
"blinkHeight",
"float",
blinkH,
minValue=0,
maxValue=1)
mult_node = node.createMulNode(blink_att, blinkMult_att)
pm.connectAttr(mult_node + ".outputX",
bs_upBlink[0].attr(midTarget.name()))
pm.connectAttr(mult_node + ".outputX",
bs_lowBlink[0].attr(midTarget.name()))
pm.connectAttr(midBlinkH_att, bs_mid[0].attr(upTarget.name()))
low_ctl = lowControls[2]
# Adding channels for eye tracking
upVTracking_att = attribute.addAttribute(up_ctl,
"vTracking",
"float",
.02,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
upHTracking_att = attribute.addAttribute(up_ctl,
"hTracking",
"float",
.01,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
lowVTracking_att = attribute.addAttribute(low_ctl,
"vTracking",
"float",
.01,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
lowHTracking_att = attribute.addAttribute(low_ctl,
"hTracking",
"float",
.01,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
mult_node = node.createMulNode(upVTracking_att, aimTrigger_ref.attr("ty"))
pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("ty"))
mult_node = node.createMulNode(upHTracking_att, aimTrigger_ref.attr("tx"))
pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("tx"))
mult_node = node.createMulNode(lowVTracking_att, aimTrigger_ref.attr("ty"))
pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("ty"))
mult_node = node.createMulNode(lowHTracking_att, aimTrigger_ref.attr("tx"))
pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("tx"))
# Tension on blink
node.createReverseNode(blink_att, w1.scale[0])
node.createReverseNode(blink_att, w3.scale[0])
node.createReverseNode(blink_att, w2.scale[0])
node.createReverseNode(blink_att, w4.scale[0])
###########################################
# Reparenting
###########################################
if parent:
try:
if isinstance(parent, basestring):
parent = pm.PyNode(parent)
parent.addChild(eye_root)
except pm.MayaNodeError:
pm.displayWarning("The eye rig can not be parent to: %s. Maybe "
"this object doesn't exist." % parent)
###########################################
# Auto Skinning
###########################################
if doSkin:
# eyelid vertex rows
totalLoops = rigidLoops + falloffLoops
vertexLoopList = meshNavigation.getConcentricVertexLoop(
vertexList, totalLoops)
vertexRowList = meshNavigation.getVertexRowsFromLoops(vertexLoopList)
# we set the first value 100% for the first initial loop
skinPercList = [1.0]
# we expect to have a regular grid topology
for r in range(rigidLoops):
for rr in range(2):
skinPercList.append(1.0)
increment = 1.0 / float(falloffLoops)
# we invert to smooth out from 100 to 0
inv = 1.0 - increment
for r in range(falloffLoops):
for rr in range(2):
if inv < 0.0:
inv = 0.0
skinPercList.append(inv)
inv -= increment
# this loop add an extra 0.0 indices to avoid errors
for r in range(10):
for rr in range(2):
skinPercList.append(0.0)
# base skin
geo = pm.listRelatives(edgeLoopList[0], parent=True)[0]
# Check if the object has a skinCluster
objName = pm.listRelatives(geo, parent=True)[0]
skinCluster = skin.getSkinCluster(objName)
if not skinCluster:
skinCluster = pm.skinCluster(headJnt,
geo,
tsb=True,
nw=2,
n='skinClsEyelid')
eyelidJoints = upperEyelid_jnt + lowerEyelid_jnt
pm.progressWindow(title='Auto skinning process',
progress=0,
max=len(eyelidJoints))
firstBoundary = False
for jnt in eyelidJoints:
pm.progressWindow(e=True, step=1, status='\nSkinning %s' % jnt)
skinCluster.addInfluence(jnt, weight=0)
v = meshNavigation.getClosestVertexFromTransform(geo, jnt)
for row in vertexRowList:
if v in row:
it = 0 # iterator
inc = 1 # increment
for i, rv in enumerate(row):
try:
perc = skinPercList[it]
t_val = [(jnt, perc), (headJnt, 1.0 - perc)]
pm.skinPercent(skinCluster,
rv,
transformValue=t_val)
if rv.isOnBoundary():
# we need to compare with the first boundary
# to check if the row have inverted direction
# and offset the value
if not firstBoundary:
firstBoundary = True
firstBoundaryValue = it
else:
if it < firstBoundaryValue:
it -= 1
elif it > firstBoundaryValue:
it += 1
inc = 2
except IndexError:
continue
it = it + inc
pm.progressWindow(e=True, endProgress=True)
# Eye Mesh skinning
skinCluster = skin.getSkinCluster(eyeMesh)
if not skinCluster:
skinCluster = pm.skinCluster(eyeCenter_jnt,
eyeMesh,
tsb=True,
nw=1,
n='skinClsEye')
def addOperatorsNotGlobalMaster(self):
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5, .5, .5)
op.rename(self.getName("slideCurveOp"))
# pm.connectAttr(self.position_att, op + ".position")
# pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
# pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
# pm.connectAttr(self.softness_att, op + ".softness")
self.slv_crv_op = op
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
if not self.settings["isPlanetaryIkBindToGlobal"]:
self.addOperatorsIkTwist()
# ensure plugin loaded
if 0 == cmds.pluginInfo("rotationDriver", query=True, loaded=True):
cmds.loadPlugin("rotationDriver")
self.decomp_tip_ik_rot = pm.createNode("decomposeRotate")
# self.ik_decompose_rot.append(self.decomp_tip_ik_rot)
pm.setAttr(self.decomp_tip_ik_rot.attr("axisOrientX"), 90.0)
pm.setAttr(self.decomp_tip_ik_rot.attr("axisOrientZ"), 90.0)
pm.connectAttr(self.ik_ctl[-1].rotate, self.decomp_tip_ik_rot.attr("rotate"))
self.addOperatorsIkRoll()
# Division -----------------------------------------
rootWorld_node = node.createDecomposeMatrixNode(self.root.attr("worldMatrix"))
for i in range(len(self.guide.apos)):
self.addFkOperator(i, rootWorld_node, crv_node)
# CONNECT STACK
# master components
mstr_global = self.settings["masterChainGlobal"]
mstr_local = self.settings["masterChainLocal"]
if mstr_global:
mstr_global = self.rig.components[mstr_global]
if mstr_local:
mstr_local = self.rig.components[mstr_local]
# connect global IK
if mstr_global:
for e, _ in enumerate(self.ik_ctl):
# connect in global
self.connect_master(mstr_global.ik_global_out,
self.ik_global_in,
e,
self.settings["cnxOffset"])
# connect in local
if mstr_local:
for e, _ in enumerate(self.ik_ctl):
self.connect_master(mstr_local.ik_ctl,
self.ik_local_in,
e,
self.settings["cnxOffset"])
for e, _ in enumerate(self.fk_ctl):
self.connect_master(mstr_local.fk_ctl,
self.fk_local_in,
e,
self.settings["cnxOffset"])
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Tangent position ---------------------------------
# common part
d = vector.getDistance(self.guide.apos[0], self.guide.apos[1])
dist_node = node.createDistNode(self.ik0_ctl, self.ik1_ctl)
rootWorld_node = node.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = node.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = node.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = node.createMulNode(self.tan0_att,
self.tan0_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan0_npo.attr("ty"))
# tan1
mul_node = node.createMulNode(self.tan1_att,
self.tan1_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan1_npo.attr("ty"))
# Tangent Mid --------------------------------------
if self.settings["centralTangent"]:
tanIntMat = applyop.gear_intmatrix_op(
self.tan0_npo.attr("worldMatrix"),
self.tan1_npo.attr("worldMatrix"), .5)
applyop.gear_mulmatrix_op(
tanIntMat.attr("output"),
self.tan_npo.attr("parentInverseMatrix[0]"), self.tan_npo)
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan0_off.attr("translate"))
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan1_off.attr("translate"))
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5,
.5, .5)
pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
cns = applyop.pathCns(self.div_cns[i], self.slv_crv, False, u,
True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 0) # front axis is 'X'
# Roll
intMatrix = applyop.gear_intmatrix_op(
self.ik0_ctl + ".worldMatrix", self.ik1_ctl + ".worldMatrix",
u)
dm_node = node.createDecomposeMatrixNode(intMatrix + ".output")
pm.connectAttr(dm_node + ".outputRotate",
self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i],
self.ref_twist[i],
maintainOffset=True)
pm.connectAttr(self.ref_twist[i] + ".translate",
cns + ".worldUpVector")
# Squash n Stretch
op = applyop.gear_squashstretch2_op(self.scl_transforms[i],
self.root,
pm.arclen(self.slv_crv), "y")
pm.connectAttr(self.volume_att, op + ".blend")
pm.connectAttr(crv_node + ".arcLength", op + ".driver")
pm.connectAttr(self.st_att[i], op + ".stretch")
pm.connectAttr(self.sq_att[i], op + ".squash")
# Connections (Hooks) ------------------------------
pm.pointConstraint(self.scl_transforms[0], self.cnx0)
pm.scaleConstraint(self.scl_transforms[0], self.cnx0)
pm.orientConstraint(self.ik0_ctl, self.cnx0)
pm.pointConstraint(self.scl_transforms[-1], self.cnx1)
pm.scaleConstraint(self.scl_transforms[-1], self.cnx1)
pm.orientConstraint(self.ik1_ctl, self.cnx1)
def rig(
eyeMesh=None,
edgeLoop="",
blinkH=20,
namePrefix="eye",
offset=0.05,
rigidLoops=2,
falloffLoops=4,
headJnt=None,
doSkin=True,
parent_node=None,
ctlName="ctl",
sideRange=False,
customCorner=False,
intCorner=None,
extCorner=None,
ctlSet=None,
defSet=None,
upperVTrack=0.02,
upperHTrack=0.01,
lowerVTrack=0.02,
lowerHTrack=0.01,
aim_controller="",
deformers_group="",
everyNVertex=1,
):
"""Create eyelid and eye rig
Args:
eyeMesh (TYPE): Description
edgeLoop (TYPE): Description
blinkH (TYPE): Description
namePrefix (TYPE): Description
offset (TYPE): Description
rigidLoops (TYPE): Description
falloffLoops (TYPE): Description
headJnt (TYPE): Description
doSkin (TYPE): Description
parent_node (None, optional): Description
ctlName (str, optional): Description
sideRange (bool, optional): Description
customCorner (bool, optional): Description
intCorner (None, optional): Description
extCorner (None, optional): Description
ctlSet (None, optional): Description
defSet (None, optional): Description
upperVTrack (None, optional): Description
upperHTrack (None, optional): Description
lowerVTrack (None, optional): Description
lowerHTrack (None, optional): Description
aim_controller (None, optional): Description
deformers_group (None, optional): Description
everyNVertex (int, optional): Will create a joint every N vertex
No Longer Returned:
TYPE: Description
"""
##########################################
# INITIAL SETUP
##########################################
up_axis = pm.upAxis(q=True, axis=True)
if up_axis == "z":
z_up = True
else:
z_up = False
# getters
edgeLoopList = get_edge_loop(edgeLoop)
eyeMesh = get_eye_mesh(eyeMesh)
# checkers
if not edgeLoopList or not eyeMesh:
return
if doSkin:
if not headJnt:
pm.displayWarning("Please set the Head Jnt or unCheck "
"Compute Topological Autoskin")
return
# Convert data
blinkH = blinkH / 100.0
# Initial Data
bboxCenter = meshNavigation.bboxCenter(eyeMesh)
extr_v = meshNavigation.getExtremeVertexFromLoop(edgeLoopList, sideRange,
z_up)
upPos = extr_v[0]
lowPos = extr_v[1]
inPos = extr_v[2]
outPos = extr_v[3]
edgeList = extr_v[4]
vertexList = extr_v[5]
# Detect the side L or R from the x value
if inPos.getPosition(space="world")[0] < 0.0:
side = "R"
inPos = extr_v[3]
outPos = extr_v[2]
normalPos = outPos
npw = normalPos.getPosition(space="world")
normalVec = npw - bboxCenter
else:
side = "L"
normalPos = outPos
npw = normalPos.getPosition(space="world")
normalVec = bboxCenter - npw
# Manual Vertex corners
if customCorner:
if intCorner:
try:
if side == "R":
inPos = pm.PyNode(extCorner)
else:
inPos = pm.PyNode(intCorner)
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % intCorner)
return
else:
pm.displayWarning("Please set the internal eyelid corner")
return
if extCorner:
try:
normalPos = pm.PyNode(extCorner)
npw = normalPos.getPosition(space="world")
if side == "R":
outPos = pm.PyNode(intCorner)
normalVec = npw - bboxCenter
else:
outPos = pm.PyNode(extCorner)
normalVec = bboxCenter - npw
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % extCorner)
return
else:
pm.displayWarning("Please set the external eyelid corner")
return
# Check if we have prefix:
if namePrefix:
namePrefix = string.removeInvalidCharacter(namePrefix)
else:
pm.displayWarning("Prefix is needed")
return
def setName(name, ind=None):
namesList = [namePrefix, side, name]
if ind is not None:
namesList[1] = side + str(ind)
name = "_".join(namesList)
return name
if pm.ls(setName("root")):
pm.displayWarning("The object %s already exist in the scene. Please "
"choose another name prefix" % setName("root"))
return
##########################################
# CREATE OBJECTS
##########################################
# Eye root
eye_root = primitive.addTransform(None, setName("root"))
eyeCrv_root = primitive.addTransform(eye_root, setName("crvs"))
# Eyelid Main crvs
try:
upEyelid_edge = meshNavigation.edgeRangeInLoopFromMid(
edgeList, upPos, inPos, outPos)
up_crv = curve.createCurveFromOrderedEdges(upEyelid_edge,
inPos,
setName("upperEyelid"),
parent=eyeCrv_root)
upCtl_crv = curve.createCurveFromOrderedEdges(upEyelid_edge,
inPos,
setName("upCtl_crv"),
parent=eyeCrv_root)
pm.rebuildCurve(upCtl_crv, s=2, rt=0, rpo=True, ch=False)
lowEyelid_edge = meshNavigation.edgeRangeInLoopFromMid(
edgeList, lowPos, inPos, outPos)
low_crv = curve.createCurveFromOrderedEdges(lowEyelid_edge,
inPos,
setName("lowerEyelid"),
parent=eyeCrv_root)
lowCtl_crv = curve.createCurveFromOrderedEdges(lowEyelid_edge,
inPos,
setName("lowCtl_crv"),
parent=eyeCrv_root)
pm.rebuildCurve(lowCtl_crv, s=2, rt=0, rpo=True, ch=False)
except UnboundLocalError:
if customCorner:
pm.displayWarning("This error is maybe caused because the custom "
"Corner vertex is not part of the edge loop")
pm.displayError(traceback.format_exc())
return
# blendshape curves. All crv have 30 point to allow blendshape connect
upDriver_crv = curve.createCurveFromCurve(up_crv,
setName("upDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
upDriver_crv.attr("lineWidth").set(5)
lowDriver_crv = curve.createCurveFromCurve(low_crv,
setName("lowDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
lowDriver_crv.attr("lineWidth").set(5)
upRest_target_crv = curve.createCurveFromCurve(
up_crv, setName("upRest_target_crv"), nbPoints=30, parent=eyeCrv_root)
lowRest_target_crv = curve.createCurveFromCurve(
low_crv,
setName("lowRest_target_crv"),
nbPoints=30,
parent=eyeCrv_root)
upProfile_target_crv = curve.createCurveFromCurve(
up_crv,
setName("upProfile_target_crv"),
nbPoints=30,
parent=eyeCrv_root,
)
lowProfile_target_crv = curve.createCurveFromCurve(
low_crv,
setName("lowProfile_target_crv"),
nbPoints=30,
parent=eyeCrv_root,
)
# mid driver
midUpDriver_crv = curve.createCurveFromCurve(up_crv,
setName("midUpDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
midLowDriver_crv = curve.createCurveFromCurve(low_crv,
setName("midLowDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
# curve that define the close point of the eyelid
closeTarget_crv = curve.createCurveFromCurve(up_crv,
setName("closeTarget_crv"),
nbPoints=30,
parent=eyeCrv_root)
eyeCrv_root.attr("visibility").set(False)
# localBBOX
localBBox = eyeMesh.getBoundingBox(invisible=True, space="world")
wRadius = abs((localBBox[0][0] - localBBox[1][0]))
dRadius = abs((localBBox[0][1] - localBBox[1][1]) / 1.7)
# Groups
if not ctlSet:
ctlSet = "rig_controllers_grp"
try:
ctlSet = pm.PyNode(ctlSet)
except pm.MayaNodeError:
pm.sets(n=ctlSet, em=True)
ctlSet = pm.PyNode(ctlSet)
if not defSet:
defSet = "rig_deformers_grp"
try:
defset = pm.PyNode(defSet)
except pm.MayaNodeError:
pm.sets(n=defSet, em=True)
defset = pm.PyNode(defSet)
# Calculate center looking at
averagePosition = (upPos.getPosition(space="world") + lowPos.getPosition(
space="world") + inPos.getPosition(space="world") +
outPos.getPosition(space="world")) / 4
if z_up:
axis = "zx"
else:
axis = "z-x"
t = transform.getTransformLookingAt(bboxCenter,
averagePosition,
normalVec,
axis=axis,
negate=False)
over_npo = primitive.addTransform(eye_root, setName("center_lookatRoot"),
t)
center_lookat = primitive.addTransform(over_npo, setName("center_lookat"),
t)
if side == "R":
over_npo.attr("rx").set(over_npo.attr("rx").get() * -1)
over_npo.attr("ry").set(over_npo.attr("ry").get() + 180)
over_npo.attr("sz").set(-1)
t = transform.getTransform(over_npo)
# Tracking
# Eye aim control
t_arrow = transform.getTransformLookingAt(
bboxCenter,
averagePosition,
upPos.getPosition(space="world"),
axis="zy",
negate=False,
)
radius = abs((localBBox[0][0] - localBBox[1][0]) / 1.7)
arrow_ctl = None
arrow_npo = None
if aim_controller:
arrow_ctl = pm.PyNode(aim_controller)
else:
arrow_npo = primitive.addTransform(eye_root, setName("aim_npo"),
t_arrow)
arrow_ctl = icon.create(
arrow_npo,
setName("aim_%s" % ctlName),
t_arrow,
icon="arrow",
w=1,
po=datatypes.Vector(0, 0, radius),
color=4,
)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=arrow_ctl)
attribute.setKeyableAttributes(arrow_ctl, params=["rx", "ry", "rz"])
attribute.addAttribute(arrow_ctl, "isCtl", "bool", keyable=False)
# tracking custom trigger
if side == "R":
tt = t_arrow
else:
tt = t
aimTrigger_root = primitive.addTransform(center_lookat,
setName("aimTrigger_root"), tt)
# For some unknown reason the right side gets scewed rotation values
mgear.core.transform.resetTransform(aimTrigger_root)
aimTrigger_lvl = primitive.addTransform(aimTrigger_root,
setName("aimTrigger_lvl"), tt)
# For some unknown reason the right side gets scewed rotation values
mgear.core.transform.resetTransform(aimTrigger_lvl)
aimTrigger_lvl.attr("tz").set(1.0)
aimTrigger_ref = primitive.addTransform(aimTrigger_lvl,
setName("aimTrigger_ref"), tt)
# For some unknown reason the right side gets scewed rotation values
mgear.core.transform.resetTransform(aimTrigger_ref)
aimTrigger_ref.attr("tz").set(0.0)
# connect trigger with arrow_ctl
pm.parentConstraint(arrow_ctl, aimTrigger_ref, mo=True)
# Blink driver controls
if z_up:
trigger_axis = "tz"
ro_up = [0, 1.57079633 * 2, 1.57079633]
ro_low = [0, 0, 1.57079633]
po = [0, offset * -1, 0]
low_pos = 2 # Z
else:
trigger_axis = "ty"
ro_up = (1.57079633, 1.57079633, 0)
ro_low = [1.57079633, 1.57079633, 1.57079633 * 2]
po = [0, 0, offset]
low_pos = 1 # Y
# upper ctl
p = upRest_target_crv.getCVs(space="world")[15]
ut = transform.setMatrixPosition(datatypes.Matrix(), p)
npo = primitive.addTransform(over_npo, setName("upBlink_npo"), ut)
up_ctl = icon.create(
npo,
setName("upBlink_ctl"),
ut,
icon="arrow",
w=2.5,
d=2.5,
ro=datatypes.Vector(ro_up[0], ro_up[1], ro_up[2]),
po=datatypes.Vector(po[0], po[1], po[2]),
color=4,
)
attribute.setKeyableAttributes(up_ctl, [trigger_axis])
pm.sets(ctlSet, add=up_ctl)
# use translation of the object to drive the blink
blink_driver = primitive.addTransform(up_ctl, setName("blink_drv"), ut)
# lowe ctl
p_low = lowRest_target_crv.getCVs(space="world")[15]
p[low_pos] = p_low[low_pos]
lt = transform.setMatrixPosition(ut, p)
npo = primitive.addTransform(over_npo, setName("lowBlink_npo"), lt)
low_ctl = icon.create(
npo,
setName("lowBlink_ctl"),
lt,
icon="arrow",
w=1.5,
d=1.5,
ro=datatypes.Vector(ro_low[0], ro_low[1], ro_low[2]),
po=datatypes.Vector(po[0], po[1], po[2]),
color=4,
)
attribute.setKeyableAttributes(low_ctl, [trigger_axis])
pm.sets(ctlSet, add=low_ctl)
# Controls lists
upControls = []
trackLvl = []
track_corner_lvl = []
corner_ctl = []
ghost_ctl = []
# upper eyelid controls
upperCtlNames = ["inCorner", "upInMid", "upMid", "upOutMid", "outCorner"]
cvs = upCtl_crv.getCVs(space="world")
if side == "R" and not sideRange:
# if side == "R":
cvs = [cv for cv in reversed(cvs)]
# offset = offset * -1
for i, cv in enumerate(cvs):
if utils.is_odd(i):
color = 14
wd = 0.3
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = 0.6
icon_shape = "circle"
params = [
"tx",
"ty",
"tz",
"ro",
"rx",
"ry",
"rz",
"sx",
"sy",
"sz",
]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % upperCtlNames[i]), t)
npoBase = npo
# track for corners and mid point level
if i in [0, 2, 4]:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(npo,
setName("%s_trk" % upperCtlNames[i]),
t)
if i == 2:
trackLvl.append(npo)
else:
track_corner_lvl.append(npo)
if i in [1, 2, 3]:
ctl = primitive.addTransform(npo,
setName("%s_loc" % upperCtlNames[i]),
t)
# ghost controls
if i == 2:
gt = transform.setMatrixPosition(
t, transform.getPositionFromMatrix(ut))
else:
gt = t
npo_g = primitive.addTransform(
up_ctl, setName("%sCtl_npo" % upperCtlNames[i]), gt)
ctl_g = icon.create(
npo_g,
setName("%s_%s" % (upperCtlNames[i], ctlName)),
gt,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl_g
ghost_ctl.append(ctl_g)
# connect local SRT
rigbits.connectLocalTransform([ctl_g, ctl])
else:
ctl = icon.create(
npo,
setName("%s_%s" % (upperCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl
attribute.addAttribute(ctl_param, "isCtl", "bool", keyable=False)
attribute.add_mirror_config_channels(ctl_param)
node.add_controller_tag(ctl_param, over_npo)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl_param)
attribute.setKeyableAttributes(ctl_param, params)
upControls.append(ctl)
# add corner ctls to corner ctl list for tracking
if i in [0, 4]:
corner_ctl.append(ctl)
# if side == "R":
# npoBase.attr("ry").set(180)
# npoBase.attr("sz").set(-1)
# adding parent constraints to odd controls
for i, ctl in enumerate(upControls):
if utils.is_odd(i):
cns_node = pm.parentConstraint(upControls[i - 1],
upControls[i + 1],
ctl.getParent(),
mo=True)
# Make the constraint "noFlip"
cns_node.interpType.set(0)
# adding parent constraint ghost controls
cns_node = pm.parentConstraint(ghost_ctl[1],
upControls[0],
ghost_ctl[0].getParent(),
mo=True)
cns_node.interpType.set(0)
cns_node = pm.parentConstraint(ghost_ctl[1],
upControls[-1],
ghost_ctl[2].getParent(),
mo=True)
cns_node.interpType.set(0)
# lower eyelid controls
lowControls = [upControls[0]]
lowerCtlNames = [
"inCorner",
"lowInMid",
"lowMid",
"lowOutMid",
"outCorner",
]
cvs = lowCtl_crv.getCVs(space="world")
if side == "R" and not sideRange:
cvs = [cv for cv in reversed(cvs)]
for i, cv in enumerate(cvs):
# we skip the first and last point since is already in the uper eyelid
if i in [0, 4]:
continue
if utils.is_odd(i):
color = 14
wd = 0.3
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = 0.6
icon_shape = "circle"
params = [
"tx",
"ty",
"tz",
"ro",
"rx",
"ry",
"rz",
"sx",
"sy",
"sz",
]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % lowerCtlNames[i]), t)
npoBase = npo
if i in [1, 2, 3]:
if i == 2:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(
npo, setName("%s_trk" % lowerCtlNames[i]), t)
trackLvl.append(npo)
ctl = primitive.addTransform(npo,
setName("%s_loc" % lowerCtlNames[i]),
t)
# ghost controls
if i == 2:
gt = transform.setMatrixPosition(
t, transform.getPositionFromMatrix(lt))
else:
gt = t
# ghost controls
npo_g = primitive.addTransform(
low_ctl, setName("%sCtl_npo" % lowerCtlNames[i]), gt)
ctl_g = icon.create(
npo_g,
setName("%s_%s" % (lowerCtlNames[i], ctlName)),
gt,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl_g
ghost_ctl.append(ctl_g)
# connect local SRT
rigbits.connectLocalTransform([ctl_g, ctl])
else:
ctl = icon.create(
npo,
setName("%s_%s" % (lowerCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl
attribute.addAttribute(ctl_param, "isCtl", "bool", keyable=False)
attribute.add_mirror_config_channels(ctl_param)
lowControls.append(ctl)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl_param)
attribute.setKeyableAttributes(ctl_param, params)
# mirror behaviout on R side controls
# if side == "R":
# npoBase.attr("ry").set(180)
# npoBase.attr("sz").set(-1)
for lctl in reversed(lowControls[1:]):
node.add_controller_tag(lctl, over_npo)
lowControls.append(upControls[-1])
# adding parent constraints to odd controls
for i, ctl in enumerate(lowControls):
if utils.is_odd(i):
cns_node = pm.parentConstraint(
lowControls[i - 1],
lowControls[i + 1],
ctl.getParent(),
mo=True,
)
# Make the constraint "noFlip"
cns_node.interpType.set(0)
# adding parent constraint ghost controls
cns_node = pm.parentConstraint(ghost_ctl[4],
upControls[0],
ghost_ctl[3].getParent(),
mo=True)
cns_node.interpType.set(0)
cns_node = pm.parentConstraint(ghost_ctl[4],
upControls[-1],
ghost_ctl[5].getParent(),
mo=True)
cns_node.interpType.set(0)
##########################################
# OPERATORS
##########################################
# Connecting control crvs with controls
applyop.gear_curvecns_op(upCtl_crv, upControls)
applyop.gear_curvecns_op(lowCtl_crv, lowControls)
# adding wires
w1 = pm.wire(up_crv, w=upDriver_crv)[0]
w2 = pm.wire(low_crv, w=lowDriver_crv)[0]
w3 = pm.wire(upProfile_target_crv, w=upCtl_crv)[0]
w4 = pm.wire(lowProfile_target_crv, w=lowCtl_crv)[0]
if z_up:
trigger_axis = "tz"
else:
trigger_axis = "ty"
# connect blink driver
pm.pointConstraint(low_ctl, blink_driver, mo=False)
rest_val = blink_driver.attr(trigger_axis).get()
up_div_node = node.createDivNode(up_ctl.attr(trigger_axis), rest_val)
low_div_node = node.createDivNode(low_ctl.attr(trigger_axis),
rest_val * -1)
# contact driver
minus_node = node.createPlusMinusAverage1D(
[rest_val, blink_driver.attr(trigger_axis)], operation=2)
contact_div_node = node.createDivNode(minus_node.output1D, rest_val)
# wire tension
for w in [w1, w2, w3, w4]:
w.dropoffDistance[0].set(100)
# TODO: what is the best solution?
# trigger using proximity
# remap_node = pm.createNode("remapValue")
# contact_div_node.outputX >> remap_node.inputValue
# remap_node.value[0].value_Interp.set(2)
# remap_node.inputMin.set(0.995)
# reverse_node = node.createReverseNode(remap_node.outColorR)
# for w in [w1, w2]:
# reverse_node.outputX >> w.scale[0]
# trigger at starting movement for up and low
# up
remap_node = pm.createNode("remapValue")
up_ctl.attr(trigger_axis) >> remap_node.inputValue
remap_node.value[0].value_Interp.set(2)
remap_node.inputMax.set(rest_val / 8)
reverse_node = node.createReverseNode(remap_node.outColorR)
reverse_node.outputX >> w1.scale[0]
# low
remap_node = pm.createNode("remapValue")
low_ctl.attr(trigger_axis) >> remap_node.inputValue
remap_node.value[0].value_Interp.set(2)
remap_node.inputMin.set((rest_val / 8) * -1)
remap_node.outColorR >> w2.scale[0]
# mid position drivers blendshapes
bs_midUpDrive = pm.blendShape(
lowRest_target_crv,
upProfile_target_crv,
midUpDriver_crv,
n="midUpDriver_blendShape",
)
bs_midLowDrive = pm.blendShape(
upRest_target_crv,
lowProfile_target_crv,
midLowDriver_crv,
n="midlowDriver_blendShape",
)
bs_closeTarget = pm.blendShape(
midUpDriver_crv,
midLowDriver_crv,
closeTarget_crv,
n="closeTarget_blendShape",
)
pm.connectAttr(
up_div_node.outputX,
bs_midUpDrive[0].attr(lowRest_target_crv.name()),
)
pm.connectAttr(
low_div_node.outputX,
bs_midLowDrive[0].attr(upRest_target_crv.name()),
)
pm.setAttr(bs_closeTarget[0].attr(midUpDriver_crv.name()), 0.5)
pm.setAttr(bs_closeTarget[0].attr(midLowDriver_crv.name()), 0.5)
# Main crv drivers
bs_upBlink = pm.blendShape(
lowRest_target_crv,
closeTarget_crv,
upProfile_target_crv,
upDriver_crv,
n="upBlink_blendShape",
)
bs_lowBlink = pm.blendShape(
upRest_target_crv,
closeTarget_crv,
lowProfile_target_crv,
lowDriver_crv,
n="lowBlink_blendShape",
)
# blink contact connections
cond_node_up = node.createConditionNode(contact_div_node.outputX, 1, 3, 0,
up_div_node.outputX)
pm.connectAttr(
cond_node_up.outColorR,
bs_upBlink[0].attr(lowRest_target_crv.name()),
)
cond_node_low = node.createConditionNode(contact_div_node.outputX, 1, 3, 0,
low_div_node.outputX)
pm.connectAttr(
cond_node_low.outColorR,
bs_lowBlink[0].attr(upRest_target_crv.name()),
)
cond_node_close = node.createConditionNode(contact_div_node.outputX, 1, 2,
1, 0)
cond_node_close.colorIfFalseR.set(0)
pm.connectAttr(
cond_node_close.outColorR,
bs_upBlink[0].attr(closeTarget_crv.name()),
)
pm.connectAttr(
cond_node_close.outColorR,
bs_lowBlink[0].attr(closeTarget_crv.name()),
)
pm.setAttr(bs_upBlink[0].attr(upProfile_target_crv.name()), 1)
pm.setAttr(bs_lowBlink[0].attr(lowProfile_target_crv.name()), 1)
# joints root
jnt_root = primitive.addTransformFromPos(eye_root,
setName("joints"),
pos=bboxCenter)
if deformers_group:
deformers_group = pm.PyNode(deformers_group)
pm.parentConstraint(eye_root, jnt_root, mo=True)
pm.scaleConstraint(eye_root, jnt_root, mo=True)
deformers_group.addChild(jnt_root)
# head joint
if headJnt:
try:
headJnt = pm.PyNode(headJnt)
jnt_base = headJnt
except pm.MayaNodeError:
pm.displayWarning("Aborted can not find %s " % headJnt)
return
else:
# Eye root
jnt_base = jnt_root
eyeTargets_root = primitive.addTransform(eye_root, setName("targets"))
eyeCenter_jnt = rigbits.addJnt(arrow_ctl,
jnt_base,
grp=defset,
jntName=setName("center_jnt"))
# Upper Eyelid joints ##################################################
cvs = up_crv.getCVs(space="world")
upCrv_info = node.createCurveInfoNode(up_crv)
# aim constrain targets and joints
upperEyelid_aimTargets = []
upperEyelid_jnt = []
upperEyelid_jntRoot = []
if z_up:
axis = "zy"
wupVector = [0, 0, 1]
else:
axis = "-yz"
wupVector = [0, 1, 0]
for i, cv in enumerate(cvs):
if i % everyNVertex:
continue
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("upEyelid_aimTarget", i),
pos=cv)
upperEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(upCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("upEyelid_jnt_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(0.08)
jntRoot.attr("visibility").set(False)
upperEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot,
trn,
axis=axis,
wupObject=jnt_root,
wupVector=wupVector)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("upEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(0.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("upEyelid_jnt", i))
upperEyelid_jnt.append(jnt)
# Lower Eyelid joints ##################################################
cvs = low_crv.getCVs(space="world")
lowCrv_info = node.createCurveInfoNode(low_crv)
# aim constrain targets and joints
lowerEyelid_aimTargets = []
lowerEyelid_jnt = []
lowerEyelid_jntRoot = []
for i, cv in enumerate(cvs):
if i in [0, len(cvs) - 1]:
continue
if i % everyNVertex:
continue
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("lowEyelid_aimTarget", i),
pos=cv)
lowerEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(lowCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("lowEyelid_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(0.08)
jntRoot.attr("visibility").set(False)
lowerEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot,
trn,
axis=axis,
wupObject=jnt_root,
wupVector=wupVector)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("lowEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(0.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("lowEyelid_jnt", i))
lowerEyelid_jnt.append(jnt)
# Adding channels for eye tracking
upVTracking_att = attribute.addAttribute(up_ctl,
"vTracking",
"float",
upperVTrack,
minValue=0)
upHTracking_att = attribute.addAttribute(up_ctl,
"hTracking",
"float",
upperHTrack,
minValue=0)
lowVTracking_att = attribute.addAttribute(low_ctl,
"vTracking",
"float",
lowerVTrack,
minValue=0)
lowHTracking_att = attribute.addAttribute(low_ctl,
"hTracking",
"float",
lowerHTrack,
minValue=0)
# vertical tracking connect
up_mult_node = node.createMulNode(upVTracking_att,
aimTrigger_ref.attr("ty"))
low_mult_node = node.createMulNode(lowVTracking_att,
aimTrigger_ref.attr("ty"))
# remap to use the low or the up eyelid as driver contact base on
# the eyetrack trigger direction
uT_remap_node = pm.createNode("remapValue")
aimTrigger_ref.attr("ty") >> uT_remap_node.inputValue
uT_remap_node.inputMax.set(0.1)
uT_remap_node.inputMin.set(-0.1)
up_mult_node.outputX >> uT_remap_node.outputMax
low_mult_node.outputX >> uT_remap_node.outputMin
# up
u_remap_node = pm.createNode("remapValue")
contact_div_node.outputX >> u_remap_node.inputValue
u_remap_node.value[0].value_Interp.set(2)
u_remap_node.inputMin.set(0.9)
up_mult_node.outputX >> u_remap_node.outputMin
uT_remap_node.outColorR >> u_remap_node.outputMax
# low
l_remap_node = pm.createNode("remapValue")
contact_div_node.outputX >> l_remap_node.inputValue
l_remap_node.value[0].value_Interp.set(2)
l_remap_node.inputMin.set(0.9)
low_mult_node.outputX >> l_remap_node.outputMin
uT_remap_node.outColorR >> l_remap_node.outputMax
# up connect and turn down to low when contact
pm.connectAttr(u_remap_node.outColorR, trackLvl[0].attr("ty"))
pm.connectAttr(l_remap_node.outColorR, trackLvl[1].attr("ty"))
# horizontal tracking connect
mult_node = node.createMulNode(upHTracking_att, aimTrigger_ref.attr("tx"))
# Correct right side horizontal tracking
# if side == "R":
# mult_node = node.createMulNode(mult_node.attr("outputX"), -1)
pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("tx"))
mult_node = node.createMulNode(lowHTracking_att, aimTrigger_ref.attr("tx"))
# Correct right side horizontal tracking
# if side == "R":
# mult_node = node.createMulNode(mult_node.attr("outputX"), -1)
pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("tx"))
# adding channels for corner tracking
# track_corner_lvl
for i, ctl in enumerate(corner_ctl):
VTracking_att = attribute.addAttribute(ctl,
"vTracking",
"float",
0.1,
minValue=0)
if z_up:
mult_node = node.createMulNode(VTracking_att, up_ctl.tz)
mult_node2 = node.createMulNode(VTracking_att, low_ctl.tz)
plus_node = node.createPlusMinusAverage1D(
[mult_node.outputX, mult_node2.outputX])
mult_node3 = node.createMulNode(plus_node.output1D, -1)
pm.connectAttr(mult_node3.outputX, track_corner_lvl[i].attr("ty"))
else:
mult_node = node.createMulNode(VTracking_att, up_ctl.ty)
mult_node2 = node.createMulNode(VTracking_att, low_ctl.ty)
plus_node = node.createPlusMinusAverage1D(
[mult_node.outputX, mult_node2.outputX])
pm.connectAttr(plus_node.output1D, track_corner_lvl[i].attr("ty"))
###########################################
# Reparenting
###########################################
if parent_node:
try:
if isinstance(parent_node, string_types):
parent_node = pm.PyNode(parent_node)
parent_node.addChild(eye_root)
except pm.MayaNodeError:
pm.displayWarning("The eye rig can not be parent to: %s. Maybe "
"this object doesn't exist." % parent_node)
###########################################
# Auto Skinning
###########################################
if doSkin:
# eyelid vertex rows
totalLoops = rigidLoops + falloffLoops
vertexLoopList = meshNavigation.getConcentricVertexLoop(
vertexList, totalLoops)
vertexRowList = meshNavigation.getVertexRowsFromLoops(vertexLoopList)
# we set the first value 100% for the first initial loop
skinPercList = [1.0]
# we expect to have a regular grid topology
for r in range(rigidLoops):
for rr in range(2):
skinPercList.append(1.0)
increment = 1.0 / float(falloffLoops)
# we invert to smooth out from 100 to 0
inv = 1.0 - increment
for r in range(falloffLoops):
for rr in range(2):
if inv < 0.0:
inv = 0.0
skinPercList.append(inv)
inv -= increment
# this loop add an extra 0.0 indices to avoid errors
for r in range(10):
for rr in range(2):
skinPercList.append(0.0)
# base skin
geo = pm.listRelatives(edgeLoopList[0], parent=True)[0]
# Check if the object has a skinCluster
objName = pm.listRelatives(geo, parent=True)[0]
skinCluster = skin.getSkinCluster(objName)
if not skinCluster:
skinCluster = pm.skinCluster(headJnt,
geo,
tsb=True,
nw=2,
n="skinClsEyelid")
eyelidJoints = upperEyelid_jnt + lowerEyelid_jnt
pm.progressWindow(title="Auto skinning process",
progress=0,
max=len(eyelidJoints))
firstBoundary = False
for jnt in eyelidJoints:
pm.progressWindow(e=True, step=1, status="\nSkinning %s" % jnt)
skinCluster.addInfluence(jnt, weight=0)
v = meshNavigation.getClosestVertexFromTransform(geo, jnt)
for row in vertexRowList:
if v in row:
it = 0 # iterator
inc = 1 # increment
for i, rv in enumerate(row):
try:
perc = skinPercList[it]
t_val = [(jnt, perc), (headJnt, 1.0 - perc)]
pm.skinPercent(skinCluster,
rv,
transformValue=t_val)
if rv.isOnBoundary():
# we need to compare with the first boundary
# to check if the row have inverted direction
# and offset the value
if not firstBoundary:
firstBoundary = True
firstBoundaryValue = it
else:
if it < firstBoundaryValue:
it -= 1
elif it > firstBoundaryValue:
it += 1
inc = 2
except IndexError:
continue
it = it + inc
pm.progressWindow(e=True, endProgress=True)
# Eye Mesh skinning
skinCluster = skin.getSkinCluster(eyeMesh)
if not skinCluster:
skinCluster = pm.skinCluster(eyeCenter_jnt,
eyeMesh,
tsb=True,
nw=1,
n="skinClsEye")
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Auto bend ----------------------------
if self.settings["autoBend"]:
mul_node = node.createMulNode(
[self.autoBendChain[0].ry, self.autoBendChain[0].rz],
[self.sideBend_att, self.frontBend_att])
mul_node.outputX >> self.ik1autoRot_lvl.rz
mul_node.outputY >> self.ik1autoRot_lvl.rx
self.ikHandleAutoBend = primitive.addIkHandle(
self.autoBend_ctl, self.getName("ikHandleAutoBend"),
self.autoBendChain, "ikSCsolver")
# Tangent position ---------------------------------
# common part
d = vector.getDistance(self.guide.apos[1], self.guide.apos[-2])
dist_node = node.createDistNode(self.ik0_ctl, self.ik1_ctl)
rootWorld_node = node.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = node.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = node.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = node.createMulNode(self.tan0_att,
self.tan0_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan0_npo.attr("ty"))
# tan1
mul_node = node.createMulNode(self.tan1_att,
self.tan1_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan1_npo.attr("ty"))
# Tangent Mid --------------------------------------
if self.settings["centralTangent"]:
tanIntMat = applyop.gear_intmatrix_op(
self.tan0_npo.attr("worldMatrix"),
self.tan1_npo.attr("worldMatrix"), .5)
applyop.gear_mulmatrix_op(
tanIntMat.attr("output"),
self.tan_npo.attr("parentInverseMatrix[0]"), self.tan_npo)
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan0_off.attr("translate"))
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan1_off.attr("translate"))
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5,
.5, .5)
pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
tangents = [None, "tan0", "tan1"]
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
# check the indx to calculate mid point based on number of division
# we want to use the same spine for mannequin and metahuman spine
if self.settings["division"] == 4 and i in [1, 2]:
u_param = curve.getCurveParamAtPosition(
self.slv_crv, self.guide.pos[tangents[i]])[0]
cnsType = True
elif self.settings["division"] == 3 and i in [1]:
u_param = curve.getCurveParamAtPosition(
self.slv_crv, self.guide.pos[tangents[i]])[0]
cnsType = True
else:
u_param = u
cnsType = False
cns = applyop.pathCns(self.div_cns[i], self.slv_crv, cnsType,
u_param, True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 0) # front axis is 'X'
# Roll
intMatrix = applyop.gear_intmatrix_op(
self.ik0_ctl + ".worldMatrix", self.ik1_ctl + ".worldMatrix",
u)
dm_node = node.createDecomposeMatrixNode(intMatrix + ".output")
pm.connectAttr(dm_node + ".outputRotate",
self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i],
self.ref_twist[i],
maintainOffset=True)
pm.connectAttr(self.ref_twist[i] + ".translate",
cns + ".worldUpVector")
# compensate scale reference
div_node = node.createDivNode([1, 1, 1], [
rootWorld_node + ".outputScaleX", rootWorld_node +
".outputScaleY", rootWorld_node + ".outputScaleZ"
])
# Squash n Stretch
op = applyop.gear_squashstretch2_op(self.scl_transforms[i],
self.root,
pm.arclen(self.slv_crv), "y",
div_node + ".output")
pm.connectAttr(self.volume_att, op + ".blend")
pm.connectAttr(crv_node + ".arcLength", op + ".driver")
pm.connectAttr(self.st_att[i], op + ".stretch")
pm.connectAttr(self.sq_att[i], op + ".squash")
# Controlers
if i == 0:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.root.attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(mulmat_node +
".output")
pm.connectAttr(dm_node + ".outputTranslate",
self.fk_npo[i].attr("t"))
else:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(mulmat_node +
".output")
mul_node = node.createMulNode(div_node + ".output",
dm_node + ".outputTranslate")
pm.connectAttr(mul_node + ".output", self.fk_npo[i].attr("t"))
pm.connectAttr(dm_node + ".outputRotate", self.fk_npo[i].attr("r"))
# Orientation Lock
if i == 0:
dm_node = node.createDecomposeMatrixNode(self.ik0_ctl +
".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"], self.lock_ori0_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
elif i == self.settings["division"] - 1:
dm_node = node.createDecomposeMatrixNode(self.ik1_ctl +
".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"], self.lock_ori1_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
# change parent after operators applied
pm.parent(self.scl_transforms[-1], self.fk_ctl[-1])
# Connections (Hooks) ------------------------------
pm.parentConstraint(self.pelvis_lvl, self.cnx0)
pm.scaleConstraint(self.pelvis_lvl, self.cnx0)
transform.matchWorldTransform(self.scl_transforms[-1], self.cnx1)
t = transform.setMatrixPosition(transform.getTransform(self.cnx1),
self.guide.apos[-1])
self.cnx1.setMatrix(t, worldSpace=True)
pm.parentConstraint(self.scl_transforms[-1], self.cnx1, mo=True)
pm.scaleConstraint(self.scl_transforms[-1], self.cnx1)
