def handle_request(self, query, request):
"""
when a request is received, handle it and returns the response pdu
"""
request_pdu = ""
try:
#extract the pdu and the slave id
(slave_id, request_pdu) = query.parse_request(request)
#get the slave and let him executes the action
if slave_id == 0:
#broadcast
for key in self._slaves:
self._slaves[key].handle_request(request_pdu, broadcast=True)
return
else:
slave = self.get_slave(slave_id)
response_pdu = slave.handle_request(request_pdu)
#make the full response
response = query.build_response(response_pdu)
return response
except Exception as excpt:
call_hooks("modbus.Databank.on_error", (self, excpt, request_pdu))
LOGGER.error("handle request failed: " + str(excpt))
#If the request was not handled correctly, return a server error response
func_code = 1
if len(request_pdu) > 0:
(func_code, ) = struct.unpack(">B", request_pdu[0])
return struct.pack(">BB", func_code+0x80, defines.SLAVE_DEVICE_FAILURE)
def _do_run(self):
"""main function of the server"""
try:
#check the status of every socket
response = ""
request = ""
read_bytes = "dummy"
while read_bytes:
read_bytes = self._serial.read(128)
request += read_bytes
#parse the request
if request:
retval = call_hooks("modbus_rtu.RtuServer.after_read", (self, request))
if retval is not None:
request = retval
response = self._handle(request)
#send back the response
retval = call_hooks("modbus_rtu.RtuServer.before_write", (self, response))
if retval is not None:
response = retval
if response:
self._serial.write(response)
time.sleep(self.get_timeout())
except Exception as excpt:
LOGGER.error("Error while handling request, Exception occurred: %s", excpt)
call_hooks("modbus_rtu.RtuServer.on_error", (self, excpt))
def __init__(self, serial, interchar_multiplier=1.5, interframe_multiplier=3.5):
"""Constructor. Pass the pyserial.Serial object"""
self._serial = serial
LOGGER.info("RtuMaster %s is %s", self._serial.portstr, "opened" if self._serial.isOpen() else "closed")
super(RtuMaster, self).__init__(self._serial.timeout)
self._t0 = utils.calculate_rtu_inter_char(self._serial.baudrate)
self._serial.interCharTimeout = interchar_multiplier * self._t0
self.set_timeout(interframe_multiplier * self._t0)
def _do_run(self):
"""main function of the server"""
try:
# check the status of every socket
request = utils.to_data('')
if self._block_on_first_byte:
# do a blocking read for first byte
self._serial.timeout = None
try:
read_bytes = self._serial.read(1)
request += read_bytes
except Exception as e:
self._serial.close()
self._serial.open()
self._serial.timeout = self._timeout
# Read rest of the request
while True:
try:
read_bytes = self._serial.read(128)
if not read_bytes:
break
except Exception as e:
self._serial.close()
self._serial.open()
break
request += read_bytes
# parse the request
if request:
retval = call_hooks("modbus_rtu.RtuServer.after_read", (self, request))
if retval is not None:
request = retval
response = self._handle(request)
# send back the response
retval = call_hooks("modbus_rtu.RtuServer.before_write", (self, response))
if retval is not None:
response = retval
if response:
if self._serial.in_waiting > 0:
# Most likely master timed out on this request and started a new one
# for which we already received atleast 1 byte
LOGGER.warning("Not sending response because there is new request pending")
else:
self._serial.write(response)
self._serial.flush()
time.sleep(self.get_timeout())
call_hooks("modbus_rtu.RtuServer.after_write", (self, response))
except Exception as excpt:
LOGGER.error("Error while handling request, Exception occurred: %s", excpt)
call_hooks("modbus_rtu.RtuServer.on_error", (self, excpt))
def _run(self):
"""main function of the thread execute _main_fct until stop is called"""
#pylint: disable=broad-except
try:
if self._fcts[0]:
self._fcts[0](*self._args)
while self._go.isSet():
self._fcts[1](*self._args)
except Exception, excpt:
LOGGER.error("error: %s", str(excpt))
def _run_server(self):
"""main function of the main thread"""
try:
self._do_init()
while self._go.isSet():
self._do_run()
LOGGER.info("%s has stopped", self.__class__)
self._do_exit()
except Exception, excpt:
LOGGER.error("server error: %s", str(excpt))
def _send(self, request):
"""Send request to the slave"""
retval = call_hooks("modbus_tcp.TcpMaster.before_send", (self, request))
if retval is not None:
request = retval
try:
flush_socket(self._sock, 3)
except Exception as msg:
#if we can't flush the socket successfully: a disconnection may happened
#try to reconnect
LOGGER.error('Error while flushing the socket: {0}'.format(msg))
self._do_open()
self._sock.send(request)
def __init__(self, serial, interchar_multiplier=1.5, interframe_multiplier=3.5, t0=None):
"""Constructor. Pass the pyserial.Serial object"""
self._serial = serial
self.use_sw_timeout = False
LOGGER.info("RtuMaster %s is %s", self._serial.name, "opened" if self._serial.is_open else "closed")
super(RtuMaster, self).__init__(self._serial.timeout)
if t0:
self._t0 = t0
else:
self._t0 = utils.calculate_rtu_inter_char(self._serial.baudrate)
self._serial.inter_byte_timeout = interchar_multiplier * self._t0
self.set_timeout(interframe_multiplier * self._t0)
# For some RS-485 adapters, the sent data(echo data) appears before modbus response.
# So read echo data and discard it. By [email protected]
self.handle_local_echo = False
def handle_request(self, request_pdu, broadcast=False):
"""
parse the request pdu, makes the corresponding action
and returns the response pdu
"""
# thread-safe
with self._data_lock:
try:
retval = call_hooks("modbus.Slave.handle_request", (self, request_pdu))
if retval is not None:
return retval
# get the function code
(function_code,) = struct.unpack(">B", request_pdu[0])
# check if the function code is valid. If not returns error response
if function_code not in self._fn_code_map:
raise ModbusError(defines.ILLEGAL_FUNCTION)
# if read query is broadcasted raises an error
cant_be_broadcasted = (
defines.READ_COILS,
defines.READ_DISCRETE_INPUTS,
defines.READ_INPUT_REGISTERS,
defines.READ_HOLDING_REGISTERS,
)
if broadcast and (function_code in cant_be_broadcasted):
raise ModbusInvalidRequestError("Function %d can not be broadcasted" % function_code)
# execute the corresponding function
response_pdu = self._fn_code_map[function_code](request_pdu)
if response_pdu:
if broadcast:
call_hooks("modbus.Slave.on_handle_broadcast", (self, response_pdu))
LOGGER.debug("broadcast: %s", get_log_buffer("!!", response_pdu))
return ""
else:
return struct.pack(">B", function_code) + response_pdu
raise Exception("No response for function %d" % function_code)
except ModbusError, excpt:
LOGGER.debug(str(excpt))
call_hooks("modbus.Slave.on_exception", (self, function_code, excpt))
return struct.pack(">BB", function_code + 128, excpt.get_exception_code())
def __init__(self, serial, databank=None, **kwargs):
"""
Constructor: initializes the server settings
serial: a pyserial object
databank: the data to access
interframe_multiplier: 3.5 by default
interchar_multiplier: 1.5 by default
"""
interframe_multiplier = kwargs.pop('interframe_multiplier', 3.5)
interchar_multiplier = kwargs.pop('interchar_multiplier', 1.5)
super(RtuServer, self).__init__(databank if databank else Databank())
self._serial = serial
LOGGER.info("RtuServer %s is %s", self._serial.portstr, "opened" if self._serial.isOpen() else "closed")
self._t0 = utils.calculate_rtu_inter_char(self._serial.baudrate)
self._serial.interCharTimeout = interchar_multiplier * self._t0
self.set_timeout(interframe_multiplier * self._t0)
def _handle(self, request):
"""handle a received sentence"""
if self._verbose:
LOGGER.debug(get_log_buffer("-->", request))
# gets a query for analyzing the request
query = self._make_query()
retval = call_hooks("modbus.Server.before_handle_request", (self, request))
if retval:
request = retval
response = self._databank.handle_request(query, request)
retval = call_hooks("modbus.Server.after_handle_request", (self, response))
if retval:
response = retval
if response and self._verbose:
LOGGER.debug(get_log_buffer("<--", response))
return response
def __init__(self, serial, databank=None, error_on_missing_slave=True, **kwargs):
"""
Constructor: initializes the server settings
serial: a pyserial object
databank: the data to access
interframe_multiplier: 3.5 by default
interchar_multiplier: 1.5 by default
"""
interframe_multiplier = kwargs.pop('interframe_multiplier', 3.5)
interchar_multiplier = kwargs.pop('interchar_multiplier', 1.5)
databank = databank if databank else Databank(error_on_missing_slave=error_on_missing_slave)
super(RtuServer, self).__init__(databank)
self._serial = serial
LOGGER.info("RtuServer %s is %s", self._serial.name, "opened" if self._serial.is_open else "closed")
self._t0 = utils.calculate_rtu_inter_char(self._serial.baudrate)
self._serial.inter_byte_timeout = interchar_multiplier * self._t0
self.set_timeout(interframe_multiplier * self._t0)
self._block_on_first_byte = False
def _read_registers(self, block_type, request_pdu):
"""read the value of holding and input registers"""
(starting_address, quantity_of_x) = struct.unpack(">HH", request_pdu[1:5])
if (quantity_of_x <= 0) or (quantity_of_x > 125):
# maximum allowed size is 125 registers in one reading
LOGGER.debug("quantity_of_x is %d", quantity_of_x)
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
# look for the block corresponding to the request
block, offset = self._get_block_and_offset(block_type, starting_address, quantity_of_x)
# get the values
values = block[offset : offset + quantity_of_x]
# write the response header
response = struct.pack(">B", 2 * quantity_of_x)
# add the values of every register on 2 bytes
for reg in values:
fmt = "H" if self.unsigned else "h"
response += struct.pack(">" + fmt, reg)
return response
def handle_request(self, query, request):
"""
when a request is received, handle it and returns the response pdu
"""
request_pdu = ""
try:
# extract the pdu and the slave id
(slave_id, request_pdu) = query.parse_request(request)
# get the slave and let him executes the action
if slave_id == 0:
# broadcast
for key in self._slaves:
self._slaves[key].handle_request(request_pdu, broadcast=True)
return
else:
slave = self.get_slave(slave_id)
response_pdu = slave.handle_request(request_pdu)
# make the full response
response = query.build_response(response_pdu)
return response
except Exception, excpt:
call_hooks("modbus.Databank.on_error", (self, excpt, request_pdu))
LOGGER.error("handle request failed: " + str(excpt))
def handle_request(self, query, request):
"""
when a request is received, handle it and returns the response pdu
"""
request_pdu = ""
try:
# extract the pdu and the slave id
(slave_id, request_pdu) = query.parse_request(request)
# get the slave and let him executes the action
if slave_id == 0:
# broadcast
for key in self._slaves:
self._slaves[key].handle_request(request_pdu,
broadcast=True)
return
else:
try:
slave = self.get_slave(slave_id)
except MissingKeyError:
if self.error_on_missing_slave:
raise
else:
return ""
response_pdu = slave.handle_request(request_pdu)
# make the full response
response = query.build_response(response_pdu)
return response
except ModbusInvalidRequestError as excpt:
# Request is invalid, do not send any response
LOGGER.error("invalid request: " + str(excpt))
return ""
except MissingKeyError as excpt:
# No slave with this ID in server, do not send any response
LOGGER.error("handle request failed: " + str(excpt))
return ""
except Exception as excpt:
call_hooks("modbus.Databank.on_error", (self, excpt, request_pdu))
LOGGER.error("handle request failed: " + str(excpt))
# If the request was not handled correctly, return a server error response
func_code = 1
if len(request_pdu) > 0:
(func_code, ) = struct.unpack(">B", request_pdu[0:1])
return struct.pack(">BB", func_code + 0x80,
defines.SLAVE_DEVICE_FAILURE)
def execute(
self, slave, function_code, starting_address, quantity_of_x=0, output_value=0, data_format="",
expected_length=-1, write_starting_address_fc23=0, number_file=None, pdu=""
):
"""
Execute a modbus query and returns the data part of the answer as a tuple
The returned tuple depends on the query function code. see modbus protocol
specification for details
data_format makes possible to extract the data like defined in the
struct python module documentation
For function Read_File_Record
starting_address, quantity_of_x, number_file must be tuple ()
of one long (by the number of requested sub_seq)
the result will be
((sub _ seq_0 _ data), (sub_seq_1_data),... (sub_seq_N_data)).
"""
is_read_function = False
nb_of_digits = 0
if number_file is None:
number_file = tuple()
# open the connection if it is not already done
self.open()
# Build the modbus pdu and the format of the expected data.
# It depends of function code. see modbus specifications for details.
if function_code == defines.READ_COILS or function_code == defines.READ_DISCRETE_INPUTS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
byte_count = quantity_of_x // 8
if (quantity_of_x % 8) > 0:
byte_count += 1
nb_of_digits = quantity_of_x
if not data_format:
data_format = ">" + (byte_count * "B")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode + crc1 + crc2
expected_length = byte_count + 5
elif function_code == defines.READ_INPUT_REGISTERS or function_code == defines.READ_HOLDING_REGISTERS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
expected_length = 2 * quantity_of_x + 5
elif function_code == defines.READ_FILE_RECORD:
is_read_function = True
if (
isinstance(number_file, tuple)
and isinstance(starting_address, tuple)
and isinstance(quantity_of_x, tuple)
and len(number_file) == len(starting_address) == len(quantity_of_x) > 0
):
count_seq = len(number_file)
else:
raise ModbusInvalidRequestError(
'For function READ_FILE_RECORD param'
'starting_address, quantity_of_x, number_file must be tuple()'
'of one length > 0 (by the number of requested sub_seq)'
)
pdu = struct.pack(">BB", function_code, count_seq * 7) + b''.join(map(lambda zip_param: struct.pack(">BHHH", *zip_param), zip(count_seq * (6, ), number_file, starting_address, quantity_of_x)))
if not data_format:
data_format = ">BB" + 'BB'.join(map(lambda x: x*'H', quantity_of_x))
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + (byteLenSubReq+byteref+bytecode[] x 2)*countSubReq + crc1 + crc2
expected_length = 2 * sum(quantity_of_x) + 2 * count_seq + 5
elif (function_code == defines.WRITE_SINGLE_COIL) or (function_code == defines.WRITE_SINGLE_REGISTER):
if function_code == defines.WRITE_SINGLE_COIL:
if output_value != 0:
output_value = 0xff00
fmt = ">BHH"
else:
fmt = ">BH"+("H" if output_value >= 0 else "h")
pdu = struct.pack(fmt, function_code, starting_address, output_value)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + value1+value2 + crc1 + crc2
expected_length = 8
elif function_code == defines.WRITE_MULTIPLE_COILS:
byte_count = len(output_value) // 8
if (len(output_value) % 8) > 0:
byte_count += 1
pdu = struct.pack(">BHHB", function_code, starting_address, len(output_value), byte_count)
i, byte_value = 0, 0
for j in output_value:
if j > 0:
byte_value += pow(2, i)
if i == 7:
pdu += struct.pack(">B", byte_value)
i, byte_value = 0, 0
else:
i += 1
if i > 0:
pdu += struct.pack(">B", byte_value)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
expected_length = 8
elif function_code == defines.WRITE_MULTIPLE_REGISTERS:
if output_value and data_format:
byte_count = struct.calcsize(data_format)
else:
byte_count = 2 * len(output_value)
pdu = struct.pack(">BHHB", function_code, starting_address, byte_count // 2, byte_count)
if output_value and data_format:
pdu += struct.pack(data_format, *output_value)
else:
for j in output_value:
fmt = "H" if j >= 0 else "h"
pdu += struct.pack(">" + fmt, j)
# data_format is now used to process response which is always 2 registers:
# 1) data address of first register, 2) number of registers written
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
expected_length = 8
elif function_code == defines.READ_EXCEPTION_STATUS:
pdu = struct.pack(">B", function_code)
data_format = ">B"
if expected_length < 0:
# No length was specified and calculated length can be used:
expected_length = 5
elif function_code == defines.DIAGNOSTIC:
# SubFuncCode are in starting_address
pdu = struct.pack(">BH", function_code, starting_address)
if len(output_value) > 0:
for j in output_value:
# copy data in pdu
pdu += struct.pack(">B", j)
if not data_format:
data_format = ">" + (len(output_value) * "B")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + SubFunc1 + SubFunc2 + Data + crc1 + crc2
expected_length = len(output_value) + 6
elif function_code == defines.READ_WRITE_MULTIPLE_REGISTERS:
is_read_function = True
byte_count = 2 * len(output_value)
pdu = struct.pack(
">BHHHHB",
function_code, starting_address, quantity_of_x, write_starting_address_fc23,
len(output_value), byte_count
)
for j in output_value:
fmt = "H" if j >= 0 else "h"
# copy data in pdu
pdu += struct.pack(">"+fmt, j)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
expected_length = 2 * quantity_of_x + 5
elif function_code == defines.RAW:
# caller has to set arguments "pdu", "expected_length", and "data_format"
pass
elif function_code == defines.DEVICE_INFO:
# is_read_function = True
mei_type = 0x0E
pdu = struct.pack(
">BBBB",
# function_code = 43 (0x2B)
# MEI Type = 0x0E (Read Device Identification)
# output_value[0] = Read Device ID code
# output_value[1] = Object Id
function_code, mei_type, output_value[0], output_value[1]
)
else:
raise ModbusFunctionNotSupportedError("The {0} function code is not supported. ".format(function_code))
# instantiate a query which implements the MAC (TCP or RTU) part of the protocol
query = self._make_query()
# add the mac part of the protocol to the request
request = query.build_request(pdu, slave)
# send the request to the slave
retval = call_hooks("modbus.Master.before_send", (self, request))
if retval is not None:
request = retval
if self._verbose:
LOGGER.debug(get_log_buffer("-> ", request))
self._send(request)
call_hooks("modbus.Master.after_send", (self, ))
if slave != 0:
# receive the data from the slave
response = self._recv(expected_length)
retval = call_hooks("modbus.Master.after_recv", (self, response))
if retval is not None:
response = retval
if self._verbose:
LOGGER.debug(get_log_buffer("<- ", response))
# extract the pdu part of the response
response_pdu = query.parse_response(response)
# analyze the received data
(return_code, byte_2) = struct.unpack(">BB", response_pdu[0:2])
if return_code > 0x80:
# the slave has returned an error
exception_code = byte_2
raise ModbusError(exception_code)
else:
if is_read_function:
# get the values returned by the reading function
byte_count = byte_2
data = response_pdu[2:]
if byte_count != len(data):
# the byte count in the pdu is invalid
raise ModbusInvalidResponseError(
"Byte count is {0} while actual number of bytes is {1}. ".format(byte_count, len(data))
)
elif function_code == defines.DEVICE_INFO:
data = response_pdu[1:]
data_format = ">" + (len(data) * "B")
else:
# returns what is returned by the slave after a writing function
data = response_pdu[1:]
# returns the data as a tuple according to the data_format
# (calculated based on the function or user-defined)
if (re.match("[>]?[sp]?",data_format)):
result = data.decode()
else:
result = struct.unpack(data_format, data)
if nb_of_digits > 0:
digits = []
for byte_val in result:
for i in range(8):
if len(digits) >= nb_of_digits:
break
digits.append(byte_val % 2)
byte_val = byte_val >> 1
result = tuple(digits)
if function_code == defines.READ_FILE_RECORD:
sub_seq = list()
ptr = 0
while ptr < len(result):
sub_seq += ((ptr + 2, ptr + 2 + result[ptr] // 2), )
ptr += result[ptr] // 2 + 2
result = tuple(map(lambda sub_seq_x: result[sub_seq_x[0]:sub_seq_x[1]], sub_seq))
return result
def _do_run(self):
"""called in a almost-for-ever loop by the server"""
# check the status of every socket
inputready = select.select(self._sockets, [], [], 1.0)[0]
#print(inputready)
# handle data on each a socket
for sock in inputready:
try:
if sock == self._sock:
#print (self._sock)
# handle the server socket
#print ("Receiveeeeeeeeeeeeeeeeeeeee")
client, address = self._sock.accept()
client.setblocking(0)
LOGGER.debug("%s is connected with socket %d...",
str(address), client.fileno())
self._sockets.append(client)
call_hooks("modbus_tcp.TcpServer.on_connect",
(self, client, address))
return
else:
if len(sock.recv(1, socket.MSG_PEEK)) == 0:
# socket is disconnected
LOGGER.debug("%d is disconnected" % (sock.fileno()))
call_hooks("modbus_tcp.TcpServer.on_disconnect",
(self, sock))
sock.close()
self._sockets.remove(sock)
break
# handle all other sockets
sock.settimeout(1.0)
request = to_data("")
is_ok = True
# read the 7 bytes of the mbap
while (len(request) < 7) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
retval = call_hooks("modbus_tcp.TcpServer.after_recv",
(self, sock, request))
if retval is not None:
request = retval
if is_ok:
# read the rest of the request
length = self._get_request_length(request)
while (len(request) < (length + 6)) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
if is_ok:
response = ""
# parse the request
try:
response = self._handle(request)
except Exception as msg:
LOGGER.error(
"Error while handling a request, Exception occurred: %s",
msg)
# send back the response
if response:
try:
retval = call_hooks(
"modbus_tcp.TcpServer.before_send",
(self, sock, response))
if retval is not None:
response = retval
sock.send(response)
call_hooks("modbus_tcp.TcpServer.after_send",
(self, sock, response))
except Exception as msg:
is_ok = False
LOGGER.error(
"Error while sending on socket %d, Exception occurred: %s",
sock.fileno(), msg)
except Exception as excpt:
LOGGER.warning("Error while processing data on socket %d: %s",
sock.fileno(), excpt)
call_hooks("modbus_tcp.TcpServer.on_error",
(self, sock, excpt))
sock.close()
self._sockets.remove(sock)
def _do_run(self):
"""main function of the server"""
try:
# check the status of every socket
request = utils.to_data('')
if self._block_on_first_byte:
# do a blocking read for first byte
self._serial.timeout = None
try:
read_bytes = self._serial.read(1)
request += read_bytes
except Exception as e:
self._serial.close()
self._serial.open()
self._serial.timeout = self._timeout
# Read rest of the request
while True:
try:
read_bytes = self._serial.read(128)
if not read_bytes:
break
except Exception as e:
self._serial.close()
self._serial.open()
break
request += read_bytes
# parse the request
if request:
retval = call_hooks("modbus_rtu.RtuServer.after_read",
(self, request))
if retval is not None:
request = retval
response = self._handle(request)
# send back the response
retval = call_hooks("modbus_rtu.RtuServer.before_write",
(self, response))
if retval is not None:
response = retval
if response:
if self._serial.in_waiting > 0:
# Most likely master timed out on this request and started a new one
# for which we already received atleast 1 byte
LOGGER.warning(
"Not sending response because there is new request pending"
)
else:
self._serial.write(response)
self._serial.flush()
time.sleep(self.get_timeout())
call_hooks("modbus_rtu.RtuServer.after_write",
(self, response))
except Exception as excpt:
LOGGER.error(
"Error while handling request, Exception occurred: %s", excpt)
call_hooks("modbus_rtu.RtuServer.on_error", (self, excpt))
def execute(
self, slave, function_code, starting_address, quantity_of_x=0, output_value=0, data_format="", expected_length=-1):
"""
Execute a modbus query and returns the data part of the answer as a tuple
The returned tuple depends on the query function code. see modbus protocol
specification for details
data_format makes possible to extract the data like defined in the
struct python module documentation
"""
pdu = ""
is_read_function = False
nb_of_digits = 0
# open the connection if it is not already done
self.open()
# Build the modbus pdu and the format of the expected data.
# It depends of function code. see modbus specifications for details.
if function_code == defines.READ_COILS or function_code == defines.READ_DISCRETE_INPUTS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
byte_count = quantity_of_x // 8
if (quantity_of_x % 8) > 0:
byte_count += 1
nb_of_digits = quantity_of_x
if not data_format:
data_format = ">" + (byte_count * "B")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode + crc1 + crc2
expected_length = byte_count + 5
elif function_code == defines.READ_INPUT_REGISTERS or function_code == defines.READ_HOLDING_REGISTERS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
expected_length = 2 * quantity_of_x + 5
elif (function_code == defines.WRITE_SINGLE_COIL) or (function_code == defines.WRITE_SINGLE_REGISTER):
if function_code == defines.WRITE_SINGLE_COIL:
if output_value != 0:
output_value = 0xff00
fmt = ">BH"+("H" if output_value >= 0 else "h")
pdu = struct.pack(fmt, function_code, starting_address, output_value)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + value1+value2 + crc1 + crc2
expected_length = 8
elif function_code == defines.WRITE_MULTIPLE_COILS:
byte_count = len(output_value) // 8
if (len(output_value) % 8) > 0:
byte_count += 1
pdu = struct.pack(">BHHB", function_code, starting_address, len(output_value), byte_count)
i, byte_value = 0, 0
for j in output_value:
if j > 0:
byte_value += pow(2, i)
if i == 7:
pdu += struct.pack(">B", byte_value)
i, byte_value = 0, 0
else:
i += 1
if i > 0:
pdu += struct.pack(">B", byte_value)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
expected_length = 8
elif function_code == defines.WRITE_MULTIPLE_REGISTERS:
if output_value and data_format:
byte_count = struct.calcsize(data_format)
else:
byte_count = 2 * len(output_value)
pdu = struct.pack(">BHHB", function_code, starting_address, byte_count / 2, byte_count)
if output_value and data_format:
pdu += struct.pack(data_format, *output_value)
else:
for j in output_value:
fmt = "H" if j >= 0 else "h"
pdu += struct.pack(">" + fmt, j)
# data_format is now used to process response which is always 2 registers:
# 1) data address of first register, 2) number of registers written
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
expected_length = 8
elif function_code == defines.READ_EXCEPTION_STATUS:
pdu = struct.pack(">B", function_code)
data_format = ">B"
if expected_length < 0:
# No length was specified and calculated length can be used:
expected_length = 5
elif function_code == defines.DIAGNOSTIC:
# SubFuncCode are in starting_address
pdu = struct.pack(">BH", function_code, starting_address)
if len(output_value) > 0:
for j in output_value:
# copy data in pdu
pdu += struct.pack(">B", j)
if not data_format:
data_format = ">" + (len(output_value) * "B")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + SubFunc1 + SubFunc2 + Data + crc1 + crc2
expected_length = len(output_value) + 6
elif function_code == defines.READ_WRITE_MULTIPLE_REGISTERS:
is_read_function = True
byte_count = 2 * len(output_value)
pdu = struct.pack(
">BHHHHB",
function_code, starting_address, quantity_of_x, defines.READ_WRITE_MULTIPLE_REGISTERS,
len(output_value), byte_count
)
for j in output_value:
fmt = "H" if j >= 0 else "h"
# copy data in pdu
pdu += struct.pack(">"+fmt, j)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0:
# No lenght was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
expected_length = 2 * quantity_of_x + 5
else:
raise ModbusFunctionNotSupportedError("The {0} function code is not supported. ".format(function_code))
# instantiate a query which implements the MAC (TCP or RTU) part of the protocol
query = self._make_query()
# add the mac part of the protocol to the request
request = query.build_request(pdu, slave)
# send the request to the slave
retval = call_hooks("modbus.Master.before_send", (self, request))
if retval is not None:
request = retval
if self._verbose:
LOGGER.debug(get_log_buffer("-> ", request))
self._send(request)
call_hooks("modbus.Master.after_send", (self, ))
if slave != 0:
# receive the data from the slave
response = self._recv(expected_length)
retval = call_hooks("modbus.Master.after_recv", (self, response))
if retval is not None:
response = retval
if self._verbose:
LOGGER.debug(get_log_buffer("<- ", response))
# extract the pdu part of the response
response_pdu = query.parse_response(response)
# analyze the received data
(return_code, byte_2) = struct.unpack(">BB", response_pdu[0:2])
if return_code > 0x80:
# the slave has returned an error
exception_code = byte_2
raise ModbusError(exception_code)
else:
if is_read_function:
# get the values returned by the reading function
byte_count = byte_2
data = response_pdu[2:]
if byte_count != len(data):
# the byte count in the pdu is invalid
raise ModbusInvalidResponseError(
"Byte count is {0} while actual number of bytes is {1}. ".format(byte_count, len(data))
)
else:
# returns what is returned by the slave after a writing function
data = response_pdu[1:]
# returns the data as a tuple according to the data_format
# (calculated based on the function or user-defined)
result = struct.unpack(data_format, data)
if nb_of_digits > 0:
digits = []
for byte_val in result:
for i in range(8):
if len(digits) >= nb_of_digits:
break
digits.append(byte_val % 2)
byte_val = byte_val >> 1
result = tuple(digits)
return result
def _do_run(self):
"""called in a almost-for-ever loop by the server"""
# check the status of every socket
inputready = select.select(self._sockets, [], [], 1.0)[0]
# handle data on each a socket
for sock in inputready:
try:
if sock == self._sock:
# handle the server socket
client, address = self._sock.accept()
client.setblocking(0)
LOGGER.info("%s is connected with socket %d...", str(address), client.fileno())
self._sockets.append(client)
call_hooks("modbus_tcp.TcpServer.on_connect", (self, client, address))
else:
if len(sock.recv(1, socket.MSG_PEEK)) == 0:
# socket is disconnected
LOGGER.info("%d is disconnected" % (sock.fileno()))
call_hooks("modbus_tcp.TcpServer.on_disconnect", (self, sock))
sock.close()
self._sockets.remove(sock)
break
# handle all other sockets
sock.settimeout(1.0)
request = to_data("")
is_ok = True
# read the 7 bytes of the mbap
while (len(request) < 7) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
retval = call_hooks("modbus_tcp.TcpServer.after_recv", (self, sock, request))
if retval is not None:
request = retval
if is_ok:
# read the rest of the request
length = self._get_request_length(request)
while (len(request) < (length + 6)) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
if is_ok:
response = ""
# parse the request
try:
response = self._handle(request)
except Exception as msg:
LOGGER.error("Error while handling a request, Exception occurred: %s", msg)
# send back the response
if response:
try:
retval = call_hooks("modbus_tcp.TcpServer.before_send", (self, sock, response))
if retval is not None:
response = retval
sock.send(response)
call_hooks("modbus_tcp.TcpServer.after_send", (self, sock, response))
except Exception as msg:
is_ok = False
LOGGER.error(
"Error while sending on socket %d, Exception occurred: %s", sock.fileno(), msg
)
except Exception as excpt:
LOGGER.warning("Error while processing data on socket %d: %s", sock.fileno(), excpt)
call_hooks("modbus_tcp.TcpServer.on_error", (self, sock, excpt))
sock.close()
self._sockets.remove(sock)
def handle_request(self, request_pdu, broadcast=False):
"""
parse the request pdu, makes the corresponding action
and returns the response pdu
"""
# thread-safe
with self._data_lock:
try:
retval = call_hooks("modbus.Slave.handle_request",
(self, request_pdu))
if retval is not None:
return retval
print("the request_pdu", request_pdu)
# get the function code
#(start_code,)=struct.unpack(">B", request_pdu[0:1])
if type(request_pdu) == str:
(function_code, ) = struct.unpack(">B", request_pdu[0:1])
print(function_code)
else:
(function_code, ) = request_pdu[4:5]
print(function_code)
# check if the function code is valid. If not returns error response
if function_code not in self._fn_code_map:
raise ModbusError(defines.ILLEGAL_FUNCTION)
# if read query is broadcasted raises an error
cant_be_broadcasted = (defines.READ_COILS,
defines.READ_DISCRETE_INPUTS,
defines.READ_INPUT_REGISTERS,
defines.READ_HOLDING_REGISTERS)
if broadcast and (function_code in cant_be_broadcasted):
raise ModbusInvalidRequestError(
"Function %d can not be broadcasted" % function_code)
# execute the corresponding function
response_pdu = self._fn_code_map[function_code](request_pdu)
if function_code != 43:
if response_pdu:
if broadcast:
call_hooks("modbus.Slave.on_handle_broadcast",
(self, response_pdu))
LOGGER.debug("broadcast: %s",
get_log_buffer("!!", response_pdu))
return ""
else:
return struct.pack(">B",
function_code) + response_pdu
raise Exception("No response for function %d" %
function_code)
else:
print("Slave_handle_request!!!!!!", response_pdu)
return response_pdu
except ModbusError as excpt:
LOGGER.debug(str(excpt))
call_hooks("modbus.Slave.on_exception",
(self, function_code, excpt))
return struct.pack(">BB", function_code + 128,
excpt.get_exception_code())
def execute(
self,
slave,
function_code,
starting_address,
quantity_of_x=0,
output_value=0,
data_format="",
expected_length=-1,
):
"""
Execute a modbus query and returns the data part of the answer as a tuple
The returned tuple depends on the query function code. see modbus protocol
specification for details
data_format makes possible to extract the data like defined in the
struct python module documentation
"""
pdu = ""
is_read_function = False
nb_of_digits = 0
# open the connection if it is not already done
self.open()
# Build the modbus pdu and the format of the expected data.
# It depends of function code. see modbus specifications for details.
if function_code == defines.READ_COILS or function_code == defines.READ_DISCRETE_INPUTS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
byte_count = quantity_of_x / 8
if (quantity_of_x % 8) > 0:
byte_count += 1
nb_of_digits = quantity_of_x
if not data_format:
data_format = ">" + (byte_count * "B")
if expected_length < 0:
# No length was specified and calculated length can be used:
# #slave + func + bytcodeLen + bytecode + crc1 + crc2
expected_length = byte_count + 5
elif function_code == defines.READ_INPUT_REGISTERS or function_code == defines.READ_HOLDING_REGISTERS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
expected_length = 2 * quantity_of_x + 5
elif (function_code == defines.WRITE_SINGLE_COIL) or (function_code == defines.WRITE_SINGLE_REGISTER):
if function_code == defines.WRITE_SINGLE_COIL:
if output_value != 0:
output_value = 0xFF00
fmt = ">BH" + ("H" if output_value >= 0 else "h")
pdu = struct.pack(fmt, function_code, starting_address, output_value)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + value1+value2 + crc1 + crc2
expected_length = 8
elif function_code == defines.WRITE_MULTIPLE_COILS:
byte_count = len(output_value) / 8
if (len(output_value) % 8) > 0:
byte_count += 1
pdu = struct.pack(">BHHB", function_code, starting_address, len(output_value), byte_count)
i, byte_value = 0, 0
for j in output_value:
if j > 0:
byte_value += pow(2, i)
if i == 7:
pdu += struct.pack(">B", byte_value)
i, byte_value = 0, 0
else:
i += 1
if i > 0:
pdu += struct.pack(">B", byte_value)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
expected_length = 8
elif function_code == defines.WRITE_MULTIPLE_REGISTERS:
byte_count = 2 * len(output_value)
pdu = struct.pack(">BHHB", function_code, starting_address, len(output_value), byte_count)
for j in output_value:
fmt = "H" if j >= 0 else "h"
pdu += struct.pack(">" + fmt, j)
if not data_format:
data_format = ">HH"
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
expected_length = 8
elif function_code == defines.READ_EXCEPTION_STATUS:
pdu = struct.pack(">B", function_code)
data_format = ">B"
if expected_length < 0:
# No length was specified and calculated length can be used:
expected_length = 5
elif function_code == defines.DIAGNOSTIC:
# SubFuncCode are in starting_address
pdu = struct.pack(">BH", function_code, starting_address)
if len(output_value) > 0:
for j in output_value:
# copy data in pdu
pdu += struct.pack(">B", j)
if not data_format:
data_format = ">" + (len(output_value) * "B")
if expected_length < 0:
# No length was specified and calculated length can be used:
# slave + func + SubFunc1 + SubFunc2 + Data + crc1 + crc2
expected_length = len(output_value) + 6
elif function_code == defines.READ_WRITE_MULTIPLE_REGISTERS:
is_read_function = True
byte_count = 2 * len(output_value)
pdu = struct.pack(
">BHHHHB",
function_code,
starting_address,
quantity_of_x,
defines.READ_WRITE_MULTIPLE_REGISTERS,
len(output_value),
byte_count,
)
for j in output_value:
fmt = "H" if j >= 0 else "h"
# copy data in pdu
pdu += struct.pack(">" + fmt, j)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0:
# No lenght was specified and calculated length can be used:
# slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
expected_length = 2 * quantity_of_x + 5
else:
raise ModbusFunctionNotSupportedError("The {0} function code is not supported. ".format(function_code))
# instantiate a query which implements the MAC (TCP or RTU) part of the protocol
query = self._make_query()
# add the mac part of the protocol to the request
request = query.build_request(pdu, slave)
# send the request to the slave
retval = call_hooks("modbus.Master.before_send", (self, request))
if retval is not None:
request = retval
if self._verbose:
LOGGER.debug(get_log_buffer("-> ", request))
self._send(request)
call_hooks("modbus.Master.after_send", (self,))
if slave != 0:
# receive the data from the slave
response = self._recv(expected_length)
retval = call_hooks("modbus.Master.after_recv", (self, response))
if retval is not None:
response = retval
if self._verbose:
LOGGER.debug(get_log_buffer("<- ", response))
# extract the pdu part of the response
response_pdu = query.parse_response(response)
# analyze the received data
(return_code, byte_2) = struct.unpack(">BB", response_pdu[0:2])
if return_code > 0x80:
# the slave has returned an error
exception_code = byte_2
raise ModbusError(exception_code)
else:
if is_read_function:
# get the values returned by the reading function
byte_count = byte_2
data = response_pdu[2:]
if byte_count != len(data):
# the byte count in the pdu is invalid
raise ModbusInvalidResponseError(
"Byte count is {0} while actual number of bytes is {1}. ".format(byte_count, len(data))
)
else:
# returns what is returned by the slave after a writing function
data = response_pdu[1:]
# returns the data as a tuple according to the data_format
# (calculated based on the function or user-defined)
result = struct.unpack(data_format, data)
if nb_of_digits > 0:
digits = []
for byte_val in result:
for i in xrange(8):
if len(digits) >= nb_of_digits:
break
digits.append(byte_val % 2)
byte_val = byte_val >> 1
result = tuple(digits)
return result
def _do_exit(self):
"""clean the server tasks"""
#close the sockets
for sock in self._sockets:
try:
sock.close()
self._sockets.remove(sock)
except Exception as msg:
LOGGER.warning("Error while closing socket, Exception occurred: %s", msg)
self._sock.close()
self._sock = None