def loadData(analyzer, tupleFiles):
connectionsFile = cf.data_dir + tupleFiles[0]
connections_file = csv.DictReader(open(connectionsFile,
encoding="utf-8-sig"),
delimiter=",")
countriesFile = cf.data_dir + tupleFiles[1]
countries_file = csv.DictReader(open(countriesFile, encoding="utf-8"),
delimiter=",")
landing_pointsFile = cf.data_dir + tupleFiles[2]
landing_point_file = csv.DictReader(open(landing_pointsFile,
encoding="utf-8"),
delimiter=",")
for station in connections_file:
model.addConnection(analyzer, station)
model.createVertexEdge(analyzer, station)
model.addConnectionToMap(analyzer)
for country in countries_file:
model.addCountry(analyzer, country)
model.addCountryToMap(analyzer)
for landingPoint in landing_point_file:
model.addLandingPoint(analyzer, landingPoint)
model.addLandingPointToMap(analyzer)
model.addLandingPointToIDMap(analyzer)
model.connectToCapital(analyzer)
return analyzer
def loadConnections(analyzer):
"""
Carga las conexiones entre puntos
"""
file = cf.data_dir + 'connections.csv'
input_file = csv.DictReader(open(file, encoding='utf-8'), delimiter=",")
for connection in input_file:
model.addConnection(analyzer, connection)
def loadConnection(analyzer, file):
file = cf.data_dir + file
input_file = csv.DictReader(open(file, encoding="utf-8"), delimiter=",")
for connection in input_file:
model.addConnection(analyzer, connection)
model.addConnection_directed(analyzer, connection)
model.addSameOrigin(analyzer)
model.addSameOrigin_directed(analyzer)
return analyzer
def loadServices(analyzer):
"""
Carga los datos de los archivos CSV en el modelo.
Se crea un arco entre cada par de estaciones que
pertenecen al mismo servicio y van en el mismo sentido.
addRouteConnection crea conexiones entre diferentes rutas
servidas en una misma estación.
"""
"""
delta_time = -1.0
delta_memory = -1.0
tracemalloc.start()
start_time = getTime()
start_memory = getMemory()
"""
servicefile = 'connections.csv'
servicesfile = cf.data_dir + servicefile
input_file = csv.DictReader(open(servicesfile, encoding="utf-8"),
delimiter=",")
for line in input_file:
model.addLanding(analyzer, line)
servicefile = 'landing_points.csv'
servicesfile = cf.data_dir + servicefile
input_file = csv.DictReader(open(servicesfile, encoding="utf-8"),
delimiter=",")
lastservice = None
for line in input_file:
model.addInfo(analyzer, line)
servicefile = 'countries.csv'
servicesfile = cf.data_dir + servicefile
input_file = csv.DictReader(open(servicesfile, encoding="utf-8"),
delimiter=",")
lastservice = None
for line in input_file:
model.addCountry(analyzer, line)
print("1")
model.addConnection(analyzer)
print('2')
model.addCapital(analyzer)
print('3')
"""
stop_memory = getMemory()
stop_time = getTime()
tracemalloc.stop()
delta_time = stop_time - start_time
delta_memory = deltaMemory(start_memory, stop_memory)
return (analyzer,delta_time, delta_memory)"""
return analyzer
def loadConnections(analyzer, landingPointsFile, connectionsFile,
countriesFile):
delta_time = -1.0
delta_memory = -1.0
tracemalloc.start()
start_time = getTime()
start_memory = getMemory()
landingPointsList = lt.newList('ARRAY_LIST')
landingPointsFile = cf.data_dir + landingPointsFile
lpFile = csv.DictReader(open(landingPointsFile, encoding="utf-8"),
delimiter=",")
for lp in lpFile:
lt.addLast(landingPointsList, lp)
# Por cada landing point en el archivo de entrada, se llama a la función en el modelo
model.addLandingPoint(analyzer, lp)
model.addCountriesCodes(analyzer, lp)
countriesList = lt.newList('ARRAY_LIST')
countriesFile = cf.data_dir + countriesFile
cntFile = csv.DictReader(open(countriesFile, encoding="utf-8"),
delimiter=",")
for ctry in cntFile:
lt.addLast(countriesList, ctry)
# Por cada país en el archivo de entrada, se llama a la función en el modelo
model.loadCountry(analyzer, ctry)
connectionsFile = cf.data_dir + connectionsFile
cnnFile = csv.DictReader(open(connectionsFile, encoding="utf-8-sig"),
delimiter=",")
for cnn in cnnFile:
# Por cada conexión en el archivo de entrada, se llama a la función en el modelo
model.addConnection(analyzer, cnn)
model.addArchConnections(analyzer, cnn)
# Se crean las conexiónes entre los vertices de cada landing point y entre estos y el vertice de la capital
model.addPointConnections(analyzer)
stop_memory = getMemory()
stop_time = getTime()
tracemalloc.stop()
delta_time = stop_time - start_time
delta_memory = deltaMemory(start_memory, stop_memory)
return analyzer, lt.firstElement(landingPointsList), lt.firstElement(
countriesList), delta_time, delta_memory
def loadConnections(analyzer):
"""
Se crea un arco entre cada par de vertices que
pertenecen al mismo landing_point y van en el mismo sentido.
addRouteConnection crea conexiones entre diferentes cables
servidas en un mismo landing_point.
"""
servicesfile = cf.data_dir + 'connections.csv'
input_file = csv.DictReader(open(servicesfile, encoding="utf-8"),
delimiter=",")
for i in input_file:
origen = i['\ufefforigin']
destino = i['destination']
longitud = i['cable_length']
model.addConnection(analyzer, origen, destino, longitud, i)
def loadServices(analyzer, LPfile, connectionsfile):
"""
Carga los datos de los archivos CSV en el modelo.
Se crea un arco entre cada par de estaciones que
pertenecen al mismo servicio y van en el mismo sentido.
addRouteConnection crea conexiones entre diferentes rutas
servidas en una misma estación.
"""
LPfile = cf.data_dir + LPfile
LPDict = csv.DictReader(open(LPfile, encoding="utf-8"), delimiter=",")
connectionsfile = cf.data_dir + connectionsfile
connectionsDict = csv.DictReader(open(connectionsfile, encoding="utf-8"), delimiter=",")
for point in LPDict:
model.addLP(analyzer, point)
for cable in connectionsDict:
model.addConnection(analyzer, cable)
return analyzer
def loadInfo(structure):
countries_count = 0
last_country = None
countriesFile = cf.data_dir + 'countries.csv'
countriesData = csv.DictReader(open(countriesFile, encoding="utf-8"),
delimiter=",")
for country in countriesData:
structure = model.addCountry(country, structure)
countries_count += 1
if countries_count == 238:
last_country = country
countries_info = {'last': last_country, 'count': countries_count}
lpoints_count = 0
first_lpoint = None
lpointsFile = cf.data_dir + 'landing_points.csv'
lpointsData = csv.DictReader(open(lpointsFile, encoding="utf-8"),
delimiter=",")
for lpoint in lpointsData:
structure = model.addLpoint(lpoint, structure)
lpoints_count += 1
if lpoints_count == 1:
first_lpoint = lpoint
lpoints_info = {'first': first_lpoint, 'count': lpoints_count}
connections_count = 0
connectionsFile = cf.data_dir + 'connections.csv'
connectionsData = csv.DictReader(open(connectionsFile,
encoding="utf-8-sig"),
delimiter=",")
for connection in connectionsData:
structure = model.addConnection(connection, structure)
connections_count += 1
connections_info = connections_count
return [structure, [countries_info, lpoints_info, connections_info]]
def loadConnections(cont, connectionsfile):
cfile = cf.data_dir + connectionsfile
input_file = csv.DictReader(open(cfile, encoding="utf-8"), delimiter=",")
for i in input_file:
model.addConnection(cont, i)
def loadConnections(catalog):
connectionsfile = cf.data_dir + "connections.csv"
inputfile = csv.DictReader(open(connectionsfile, encoding='utf-8-sig'), delimiter=",")
for connection in inputfile:
model.addConnection(catalog, connection)
model.sameLPcables(catalog)
