예제 #1
0
파일: rapi.py 프로젝트: infercom2/rccn
 def offline(self, request, msisdn='', local='no'):
     api_log.info('%s - [PUT] %s/offline Data: msisdn: "%s"',
                  request.getClientIP(), self.path, msisdn)
     try:
         sub = Subscriber()
         sub.expire_lu(msisdn)
         data = {'status': 'success', 'error': ''}
     except SubscriberException as e:
         data = {'status': 'failed', 'error': str(e)}
         api_log.debug(data)
         return data
     # Take advantage to point this subscriber to the new location in our hlr
     # so we (at least) don't have to wait for the next hlr sync run
     try:
         if local == 'yes':
             current_bts = config['local_ip']
         else:
             current_bts = request.getClientIP()
         cur = db_conn.cursor()
         now = datetime.datetime.fromtimestamp(int(time.time()))
         cur.execute(
             'UPDATE hlr SET current_bts=%(current_bts)s, updated=%(updated)s WHERE msisdn=%(msisdn)s',
             {
                 'msisdn': msisdn,
                 'current_bts': current_bts,
                 'updated': now
             })
         db_conn.commit()
     except psycopg2.DatabaseError as e:
         data = {'status': 'failed', 'error': str(e)}
         api_log.debug(data)
         return data
     api_log.debug(data)
     return data
예제 #2
0
    def validate_data(self, pin):
        res_log.debug('Check PIN length')
        if len(pin) > 4 or len(pin) < 4:
            raise ResellerException('PIN invalid length')

        res_log.debug('Check if Reseller exists')
        # check if reseller exists in the database and the PIN is valid
        try:
            cur = db_conn.cursor()
            cur.execute(
                'SELECT msisdn,pin FROM resellers WHERE msisdn=%(msisdn)s',
                {'msisdn': str(self.reseller_msisdn)})
            if cur.rowcount > 0:
                res_log.debug('Valid Reseller found')
                res_log.debug('Auth PIN')
                data = cur.fetchone()
                if data[1] != pin:
                    raise ResellerException('Invalid PIN!')
                res_log.debug('Check if subscriber is valid')
                # check if subscriber exists
                try:
                    sub = Subscriber()
                    sub.get(self.subscriber_msisdn)
                except SubscriberException as e:
                    raise ResellerException('Invalid subscriber')

            else:
                raise ResellerException('Invalid Reseller')
        except psycopg2.DatabaseError as e:
            raise ResellerException(
                'Database error getting reseller msisdn: %s' % e)
예제 #3
0
 def deactivate_subscriptions(self, msg):
     try:
         sms = SMS()
         sub = Subscriber()
         cur = db_conn.cursor()
         cur.execute(
             'SELECT msisdn FROM subscribers WHERE subscription_status = 0 AND authorized = 1'
         )
         count = cur.rowcount
         if count > 0:
             self.logger.info('Found %d subscribers to be deactivated' %
                              count)
             subscribers_list = cur.fetchall()
             db_conn.commit()
             for mysub in subscribers_list:
                 self.logger.debug(
                     'Send SMS that account is deactivated to %s' %
                     mysub[0])
                 sms.send(config['smsc'], mysub[0], msg)
                 # disable subscriber
                 try:
                     sub.authorized(mysub[0], 0)
                 except SubscriberException as e:
                     raise SubscriptionException(
                         'PG_HLR error in deactivating subscription: %s' %
                         e)
         else:
             db_conn.commit()
             self.logger.info('No subscribers need to be deactivate')
     except psycopg2.DatabaseError as e:
         raise SubscriptionException(
             'PG_HLR error in checking subscriptions to deactivate: %s' % e)
예제 #4
0
파일: rapi.py 프로젝트: infercom2/rccn
 def search(self, request, search):
     api_log.info('%s - [GET] %s', request.getHost().host, self.path)
     try:
         sub = Subscriber()
         data = json.dumps(sub.get_msisdn_autocomplete(search))
     except SubscriberException as e:
         data = {'status': 'failed', 'error': str(e)}
     api_log.debug(data)
     return data
예제 #5
0
파일: rapi.py 프로젝트: infercom2/rccn
    def getAll(self, request):
        api_log.info('%s - [GET] %s', request.getHost().host, self.path)
        try:
            reseller = Subscriber()
            data = json.dumps(reseller.get_all(), cls=PGEncoder)
        except ResellerException as e:
            data = {'status': 'failed', 'error': str(e)}

        api_log.info(data)
        return data
예제 #6
0
파일: rapi.py 프로젝트: infercom2/rccn
    def imei(self, request, partial_imei):
        api_log.info('%s - [GET] %s/%s',
                     request.getHost().host, self.path, partial_imei)
        try:
            sub = Subscriber()
            data = json.dumps(sub.get_imei_autocomplete(partial_imei))
        except SubscriberException as e:
            data = {'status': 'failed', 'error': str(e)}

        api_log.debug(data)
        return data
예제 #7
0
파일: rapi.py 프로젝트: infercom2/rccn
    def delete(self, request, msisdn):
        api_log.info('%s - [DELETE] %s/%s',
                     request.getHost().host, self.path, msisdn)
        try:
            sub = Subscriber()
            sub.delete(msisdn)
            data = {'status': 'success', 'error': ''}
        except SubscriberException as e:
            data = {'status': 'failed', 'error': str(e)}

        api_log.info(data)
        return data
예제 #8
0
파일: rapi.py 프로젝트: infercom2/rccn
    def getAll(self, request):
        api_log.info('%s - [GET] %s', request.getHost().host, self.path)
        if (request.getHeader('Origin')
                and request.getHeader('Origin').find("8080") > -1):
            request.setHeader('Access-Control-Allow-Origin', '*')
        try:
            sub = Subscriber()
            data = json.dumps(sub.get_all(), cls=PGEncoder)
        except SubscriberException as e:
            data = {'status': 'failed', 'error': str(e)}

        api_log.info(data)
        return data
예제 #9
0
파일: rapi.py 프로젝트: infercom2/rccn
    def extension(self, request, imsi):
        api_log.info('%s - [GET] %s/%s',
                     request.getHost().host, self.path, imsi)
        if request.getHeader('Origin').find("8080") > -1:
            request.setHeader('Access-Control-Allow-Origin', '*')
        try:
            sub = Subscriber()
            data = json.dumps(sub.get_local_extension(imsi), cls=PGEncoder)
        except SubscriberException as e:
            data = {'status': 'failed', 'error': str(e)}

        api_log.debug(data)
        return data
예제 #10
0
 def subscription_info(self):
     sub = Subscriber()
     unpaid = self.get_unpaid_subscriptions()
     print('---\n\n')
     for number in unpaid:
         print('PostGres: ' + number[0] + ':')
         info = sub.print_vty_hlr_info(number)
         if "No subscriber found for extension" in info:
             print('OsmoHLR: ' + info)
             print("Checking for 5 digit extension")
             info = sub.print_vty_hlr_info(number[0][-5:])
         print('OsmoHLR: ' + info)
         print('---\n\n')
예제 #11
0
    def send_subscription_fee_notice(self, msg):
        # get all subscribers
        try:
            sub = Subscriber()
            subscribers_list = sub.get_all()
        except SubscriberException as e:
            raise SubscriptionException('%s' % e)

        sms = SMS()

        for mysub in subscribers_list:
            self.logger.debug("Send sms to %s %s" % (mysub[1], msg))
            sms.send(config['smsc'], mysub[1], msg)
예제 #12
0
파일: rapi.py 프로젝트: infercom2/rccn
 def put(self,
         request,
         msisdn='',
         name='',
         balance='',
         authorized='',
         subscription_status='',
         location='',
         equipment='',
         roaming='',
         package=''):
     api_log.info(
         '%s - [PUT] %s/%s Data: name:"%s" balance:"%s" authorized:"%s" '
         'subscription_status:"%s" location:"%s" equipment:"%s" roaming:"%s" package:"%s"',
         request.getHost().host, self.path, msisdn, name, balance,
         authorized, subscription_status, location, equipment, roaming,
         package)
     try:
         sub = Subscriber()
         if subscription_status != '':
             sub.subscription(msisdn, subscription_status)
         if authorized != '':
             sub.authorized(msisdn, authorized)
         if msisdn != '' and name != '' or balance != '':
             sub.edit(msisdn, name, balance, location, equipment, roaming,
                      package)
         data = {'status': 'success', 'error': ''}
     except SubscriberException as e:
         data = {'status': 'failed', 'error': str(e)}
     api_log.info(data)
     return data
예제 #13
0
파일: rapi.py 프로젝트: infercom2/rccn
 def name(self, request, msisdn):
     if msisdn in self.remote_names:
         if (self.remote_names[msisdn][:2] == '__' and
             (time.time() - float(self.remote_names[msisdn][2:])) < 600):
             return ''
     sub = Subscriber()
     rname = sub.get_name(msisdn)
     if not rname:
         self.remote_names[msisdn] = ''
         return ''
     if rname == '_timeout_':
         self.remote_names[msisdn] = '__' + str(time.time())
         return ''
     self.remote_names[msisdn] = rname
     return json.dumps(rname, cls=PGEncoder)
예제 #14
0
파일: rapi.py 프로젝트: infercom2/rccn
 def post(self, request, msisdn, name, balance, location, equipment,
          package):
     api_log.info(
         '%s - [POST] %s Data: msisdn:"%s" name:"%s" balance:"%s" location:"%s equipment:"%s" package: "%s"',
         request.getHost().host, self.path, msisdn, name, balance, location,
         equipment, package)
     try:
         sub = Subscriber()
         num = sub.add(msisdn, name, balance, location, equipment, package)
         if num != msisdn:
             data = {'status': 'success', 'error': num}
         else:
             data = {'status': 'success', 'error': ''}
     except SubscriberException as e:
         data = {'status': 'failed', 'error': str(e)}
     api_log.info(data)
     return data
예제 #15
0
    def send_subscription_fee_reminder(self, msg):
        try:
            subscribers_list = self.get_unpaid_subscriptions()
        except SubscriptionException as e:
            raise SubscribtionException(
                'ERROR in getting unpaid subscriptions')

        sms = SMS()
        sub = Subscriber()

        for mysub in subscribers_list:
            package = sub.get_package(mysub[0])
            self.logger.debug("Send sms to %s %s" % (mysub[0], msg))
            sms.send(config['smsc'], mysub[0], msg)
            if package > 0:
                self.logger.info("Deactivate Package for %s", mysub[0])
                sub.reset_package(mysub[0])
                sms.send(config['smsc'], mysub[0],
                         "Su paquete ha sido desactivado.")
예제 #16
0
파일: credit.py 프로젝트: infercom2/rccn
    def add(self, msisdn, credit):
        sub = Subscriber()
        sms = SMS()
        try:
            mysub = sub.get(msisdn)
            current_balance = sub.get_balance(msisdn)
        except SubscriberException as e:
            raise CreditException(e)

        new_balance = Decimal(str(credit)) + Decimal(str(current_balance))

        # update subscriber balance
        try:
            cur = db_conn.cursor()
            cur.execute(
                'UPDATE subscribers SET balance=%(new_balance)s WHERE msisdn=%(msisdn)s',
                {
                    'new_balance': Decimal(str(new_balance)),
                    'msisdn': msisdn
                })
            db_conn.commit()
            sms.send(config['smsc'], msisdn,
                     sms_credit_added % (credit, new_balance))
        except psycopg2.DatabaseError as e:
            db_conn.rollback()
            raise CreditException(
                'PG_HLR error updating subscriber balance: %s' % e)

        # insert transaction into the credit history
        try:
            cur = db_conn.cursor()
            cur.execute(
                'INSERT INTO credit_history(msisdn,previous_balance,current_balance,amount) VALUES(%s,%s,%s,%s)',
                (msisdn, current_balance, new_balance, credit))
        except psycopg2.DatabaseError as e:
            db_conn.rollback()
            raise CreditException(
                'PG_HLR error inserting invoice in the history: %s' % e)
        finally:
            db_conn.commit()
예제 #17
0
    def add(self, msisdn, pin, balance):
        # check if subscriber exists
        try:
            sub = Subscriber()
            sub.get(msisdn)
        except SubscriberException as e:
            raise ResellerException('Invalid subscriber: %s' % e)

        # provision the reseller
        try:
            cur = db_conn.cursor()
            cur.execute(
                'INSERT INTO resellers(msisdn,pin,balance) VALUES(%(msisdn)s,%(pin)s,%(balance)s)',
                {
                    'msisdn': msisdn,
                    'pin': pin,
                    'balance': Decimal(str(balance))
                })
            db_conn.commit()
        except psycopg2.DatabaseError as e:
            raise ResellerException('PG_HLR error provisioning reseller: %s' %
                                    e)
예제 #18
0
 def add_subscriber_credit(self, amount):
     res_log.info('Add %s to subscriber %s' %
                  (amount, self.subscriber_msisdn))
     try:
         sub = Subscriber()
         from modules.credit import Credit, CreditException
         credit = Credit()
         res_log.debug('Get current subscriber balance')
         current_subscriber_balance = sub.get_balance(
             self.subscriber_msisdn)
         res_log.debug('Current subscriber balance: %s' %
                       current_subscriber_balance)
         new_balance = Decimal(str(current_subscriber_balance)) + Decimal(
             str(amount))
         res_log.debug('New balance: %s' % new_balance)
         # Credit.add will send SMS
         credit.add(self.subscriber_msisdn, amount)
         self.subscriber_balance = new_balance
     except SubscriberException as e:
         raise ResellerException('Error getting subscriber balance: %s' % e)
     except CreditException as e:
         raise ResellerException('Error adding credit to subscriber: %s' %
                                 e)
예제 #19
0
파일: billing.py 프로젝트: infercom2/rccn
    def bill(self, session, subscriber, destination_number, context, duration):
        if context == 'LOCAL':
            bill_log.info(
                '==========================================================================='
            )
            bill_log.info('LOCAL Context')
            bleg_connected = session.getVariable('bleg_uuid')
            hangup_cause = session.getVariable('hangup_cause')
            #subscriber = session.getVariable('bleg_destination_number')
            #print session.getVariable('bleg_billsec')

            configuration = Configuration()
            try:
                _charge_local = configuration.check_charge_local_calls()
                if _charge_local == 1:
                    _charge = configuration.get_charge_local_calls()
                    if duration > int(_charge[1]):
                        call_cost = _charge[0]
                    else:
                        call_cost = 0
                else:
                    return
            except:
                bill_log.error('Error reading local calls charge config.')
                return

            # set destination_name and cost for the CDR
            session.setVariable('destination_name', 'Local')
            session.setVariable('cost', str(call_cost))
            bill_log.info('Call duration: %d sec Call cost: %.2f' %
                          (duration, call_cost))

            if call_cost > Decimal('0.00'):
                sub = Subscriber()
                try:
                    previous_balance = sub.get_balance(subscriber)
                    current_balance = previous_balance - call_cost
                    real_balance = 0 if current_balance < 0 else current_balance
                    bill_log.info(
                        'Previous balance: %.2f Current Balance: %.2f' %
                        (previous_balance, real_balance))
                    sub.set_balance(subscriber, real_balance)
                    bill_log.info('Billing %s completed successfully' %
                                  subscriber)
                except SubscriberException as e:
                    bill_log.error('Error during billing the subscriber: %s' %
                                   e)
            else:
                bill_log.info('Call too short to Bill')

        if context == 'OUTBOUND':
            bill_log.info(
                '==========================================================================='
            )
            bill_log.info(
                'OUTBOUND Context Bill subscriber %s destination %s' %
                (subscriber, destination_number))

            sub = Subscriber()
            # get rate
            rate = self.get_rate(destination_number)
            log_dest = rate[1]
            package = sub.get_package(subscriber)
            if package == 1 and rate[1] == "Mexico Cellular-Telcel":
                bill_log.info(
                    'Subscriber has package, removing 5 mins from call duration of %s seconds',
                    duration)
                log_dest = rate[1] + ' (P)'
                duration = duration - 300
                if duration < 0:
                    duration = 0
            if 'charge_outbound_rate_type' in globals(
            ) and charge_outbound_rate_type == 'sec':
                call_cost = Decimal(
                    math.ceil((rate[3] / 60) * duration * 100) / 100).quantize(
                        Decimal('0.01'))
            else:
                call_cost = self.get_call_cost(duration, rate[3])

            try:
                previous_balance = sub.get_balance(subscriber)
                current_balance = previous_balance - call_cost
                if current_balance < 0:
                    # There was not enough balance to cover the rounded up minutes
                    real_balance = 0
                    # Log what we ACTUALLY deducted in the CDR
                    call_cost = previous_balance
                else:
                    real_balance = current_balance
                bill_log.info('Previous balance: %.2f Current Balance: %.2f' %
                              (previous_balance, real_balance))
                sub.set_balance(subscriber, real_balance)
                bill_log.info('Billing %s completed successfully' % subscriber)
            except SubscriberException as e:
                bill_log.error('Error during billing the subscriber: %s' % e)

            # set destination_name and cost for the CDR
            session.setVariable('destination_name', log_dest)
            session.setVariable('cost', str(call_cost))
            bill_log.info('Call duration: %d sec Call cost: %.2f' %
                          (duration, call_cost))

        if context == 'INBOUND':
            bill_log.info(
                '==========================================================================='
            )
            bill_log.info('INBOUND Context')
            bleg_connected = session.getVariable('bleg_uuid')
            hangup_cause = session.getVariable('hangup_cause')
            subscriber = session.getVariable('bleg_destination_number')
            #print session.getVariable('bleg_billsec')
            configuration = Configuration()

            if (bleg_connected != '' and bleg_connected != None
                ) and hangup_cause == 'NORMAL_CLEARING':
                bill_log.info('Call B-leg was connected. Bill subscriber %s' %
                              subscriber)
                try:
                    charge_info = configuration.get_charge_inbound_calls()
                    if charge_info[1] == 'call':
                        bill_log.info('Charge type: per call, Cost: %s' %
                                      charge_info[0])
                        call_cost = charge_info[0]
                        try:
                            sub = Subscriber()
                            previous_balance = sub.get_balance(subscriber)
                            current_balance = previous_balance - call_cost
                            bill_log.info(
                                'Previous balance: %.2f Current Balance: %.2f'
                                % (previous_balance, current_balance))
                            sub.set_balance(subscriber, current_balance)
                            bill_log.info('Billing %s completed successfully' %
                                          subscriber)
                        except SubscriberException as e:
                            bill_log.error(
                                'Error during billing the subscriber: %s' % e)
                    elif charge_info[1] == 'min':
                        bill_log.info(
                            'Charge type rate per min, cost per min: %s' %
                            charge_info[0])
                        # BUG: Cannot get b-leg billsec from FS. Use the billsec of a-leg instead
                        call_cost = self.get_call_cost(duration,
                                                       charge_info[0])
                        bill_log.info('Call duration %s sec Call cost: %s' %
                                      (duration, call_cost))
                        try:
                            sub = Subscriber()
                            previous_balance = sub.get_balance(subscriber)
                            current_balance = previous_balance - call_cost
                            bill_log.info(
                                'Previous balance: %.2f Current Balance: %.2f'
                                % (previous_balance, current_balance))
                            sub.set_balance(subscriber, current_balance)
                            bill_log.info('Billing %s completed successfully' %
                                          subscriber)
                        except SubscriberException as e:
                            bill_log.error(
                                'Error during billing the subscriber: %s' % e)
                except ConfigurationException as e:
                    bill_log.error(e)
            else:
                bill_log.info(
                    'Call B-leg was not connected. Not billing subscriber %s' %
                    subscriber)
예제 #20
0
파일: rapi.py 프로젝트: infercom2/rccn
    def get(self, request, msisdn):
        api_log.info('%s - [GET] %s/%s',
                     request.getHost().host, self.path, msisdn)
        try:
            sub = Subscriber()
            if msisdn == 'all_connected':
                data = json.dumps(sub.get_all_connected(), cls=PGEncoder)
            elif msisdn == 'all_sip':
                data = json.dumps(sub.get_sip_connected())
            elif msisdn == 'unpaid_subscription':
                data = json.dumps(sub.get_unpaid_subscription(), cls=PGEncoder)
            elif msisdn == 'paid_subscription':
                data = json.dumps(sub.get_paid_subscription(), cls=PGEncoder)
            elif msisdn == 'unauthorized':
                data = json.dumps(sub.get_unauthorized(), cls=PGEncoder)
            elif msisdn == 'online':
                data = json.dumps(sub.get_online(), cls=PGEncoder)
            elif msisdn == 'offline':
                data = json.dumps(sub.get_offline(), cls=PGEncoder)
            elif msisdn == 'all_roaming':
                data = json.dumps(sub.get_roaming(), cls=PGEncoder)
            elif msisdn == 'all_foreign':
                if request.getClientIP().find("10.23") > -1:
                    request.setHeader('Access-Control-Allow-Origin', '*')
                data = json.dumps(sub.get_all_foreign(), cls=PGEncoder)
            else:
                data = json.dumps(sub.get(msisdn), cls=PGEncoder)
        except SubscriberException as e:
            data = {'status': 'failed', 'error': str(e)}

        if msisdn != 'all_connected':
            api_log.info(data)
        else:
            api_log.debug(data)

        return data