class CrashRecoveryFilerepTestCase(ScenarioTestCase, MPPTestCase):
"""
@gucs gp_create_table_random_default_distribution=off
"""
def __init__(self, methodName):
self.filerep = FilerepTestCase('preprocess')
self.path = os.path.join(self.get_source_dir(),
'../filerep_end_to_end/data')
super(CrashRecoveryFilerepTestCase, self).__init__(methodName)
def setUp(self):
'''
gpfdist port should be dynamically generated, this is a chance
that it may fail to start gpfdist service as other processes are
likely to be running on this specific port.
'''
db = Database()
db.setupDatabase('gptest')
self.filerep.preprocess()
self.filerep.setupGpfdist('8088', self.path)
self.filerep.method_setup()
super(CrashRecoveryFilerepTestCase, self).setUp()
def tearDown(self):
self.filerep.cleanupGpfdist('8088', self.path)
super(CrashRecoveryFilerepTestCase, self).tearDown()
def test_crash_recovery_filerep(self):
# Flow of the function is:
# 1 inject fault to skip check point
# 2 inject fault to suspend filerep_transition_to_sync_before_checkpoint
# 3 inject fault to suspend filerep_transition_to_sync_begin
# 4 run the test for filerep incr mirror failover
# 5 do stop start validation, recoverseg
# 6 wait for insync transition and check the integrity of the cluster
tinctest.logger.info('Skip Checkpointing using fault injector.')
test_list_0 = []
test_list_0.append(
'mpp.gpdb.tests.storage.crashrecovery.SuspendCheckpointCrashRecovery.run_pre_filerep_faults'
)
self.test_case_scenario.append(test_list_0)
test_list_1 = []
test_list_1.append(
'mpp.gpdb.tests.storage.filerep_end_to_end.test_filerep_e2e.FilerepE2EScenarioTestCase.test_incr_mirror'
)
self.test_case_scenario.append(test_list_1)
test_list_2 = []
test_list_2.append(
'mpp.gpdb.tests.storage.crashrecovery.SuspendCheckpointCrashRecovery.do_post_run_checks'
)
self.test_case_scenario.append(test_list_2)
class CrashRecoveryFilerepTestCase(ScenarioTestCase,MPPTestCase):
"""
@gucs gp_create_table_random_default_distribution=off
"""
def __init__(self, methodName):
self.filerep = FilerepTestCase('preprocess')
self.path = os.path.join(self.get_source_dir(), '../filerep_end_to_end/data')
super(CrashRecoveryFilerepTestCase, self).__init__(methodName)
def setUp(self):
'''
gpfdist port should be dynamically generated, this is a chance
that it may fail to start gpfdist service as other processes are
likely to be running on this specific port.
'''
db = Database()
db.setupDatabase('gptest')
self.filerep.preprocess()
self.filerep.setupGpfdist('8088', self.path)
self.filerep.method_setup()
super(CrashRecoveryFilerepTestCase, self).setUp()
def tearDown(self):
self.filerep.cleanupGpfdist('8088', self.path)
super(CrashRecoveryFilerepTestCase, self).tearDown()
def test_crash_recovery_filerep(self):
# Flow of the function is:
# 1 inject fault to skip check point
# 2 inject fault to suspend filerep_transition_to_sync_before_checkpoint
# 3 inject fault to suspend filerep_transition_to_sync_begin
# 4 run the test for filerep incr mirror failover
# 5 do stop start validation, recoverseg
# 6 wait for insync transition and check the integrity of the cluster
tinctest.logger.info('Skip Checkpointing using fault injector.')
test_list_0 = []
test_list_0.append('mpp.gpdb.tests.storage.crashrecovery.SuspendCheckpointCrashRecovery.run_pre_filerep_faults')
self.test_case_scenario.append(test_list_0)
test_list_1 = []
test_list_1.append('mpp.gpdb.tests.storage.filerep_end_to_end.test_filerep_e2e.FilerepE2EScenarioTestCase.test_incr_mirror')
self.test_case_scenario.append(test_list_1)
test_list_2 = []
test_list_2.append('mpp.gpdb.tests.storage.crashrecovery.SuspendCheckpointCrashRecovery.do_post_run_checks')
self.test_case_scenario.append(test_list_2)
class FilerepE2EScenarioTestCase(ScenarioTestCase, MPPTestCase):
"""
@gucs gp_create_table_random_default_distribution=off
"""
def __init__(self, methodName):
self.filerep = FilerepTestCase('preprocess')
self.path = local_path("data")
super(FilerepE2EScenarioTestCase, self).__init__(methodName)
def setUp(self):
'''
gpfdist port should be dynamically generated, this is a chance
that it may fail to start gpfdist service as other processes are
likely to be running on this specific port.
'''
super(FilerepE2EScenarioTestCase, self).setUp()
db = Database()
db.setupDatabase('gptest')
self.filerep.preprocess()
self.filerep.setupGpfdist('8088', self.path)
self.filerep.method_setup()
def tearDown(self):
self.filerep.cleanupGpfdist('8088', self.path)
super(FilerepE2EScenarioTestCase, self).tearDown()
@classmethod
def setUpClass(cls):
pass
@classmethod
def tearDownClass(cls):
pass
def test_incr_mirror(self):
self.do_test('incr', 'mirror')
def test_full_mirror(self):
self.do_test('full', 'mirror')
def test_incr_primary(self):
self.do_test('incr', 'primary')
def test_full_primary(self):
self.do_test('full', 'primary')
def test_flat_file_resync_on_checksum_mismatch(self):
filename = 'pg_distributedlog/FFFF'
# This should cause the md5 check to fail and trigger a resync of the flat files
self.filerep.create_file_in_datadir(0, 'p', filename)
try:
self.filerep.stop_start_validate()
self.filerep.verify_file_exists(0, 'm', filename)
finally:
self.filerep.remove_file_in_datadir(0, 'p', filename)
self.filerep.remove_file_in_datadir(0, 'm', filename)
def test_flat_file_resync_on_checksum_match(self):
filename = 'pg_distributedlog/FFFF'
self.filerep.create_file_in_datadir(0, 'p', filename)
self.filerep.create_file_in_datadir(0, 'm', filename)
try:
timestamp_before_restart = self.filerep.get_timestamp_of_file_in_datadir(
0, 'm', filename)
self.filerep.stop_start_validate()
timestamp_after_restart = self.filerep.get_timestamp_of_file_in_datadir(
0, 'm', filename)
self.assertEqual(
timestamp_before_restart, timestamp_after_restart,
'File %s transferred after restart. timestamp before restart (%s), timestamp after restart (%s)'
%
(filename, timestamp_before_restart, timestamp_after_restart))
finally:
self.filerep.remove_file_in_datadir(0, 'p', filename)
self.filerep.remove_file_in_datadir(0, 'm', filename)
def do_test(self, rec_mode, fail_type):
'''
@rec_mode: recovery mode, can be full or incremental
@fail_type, failover type, can be mirror or primary
'''
self.do_sync1_tests(fail_type)
self.do_ck_sync1_tests()
self.do_ct_tests(fail_type)
self.do_resync_tests(rec_mode, fail_type)
self.do_sync2_tests(rec_mode, fail_type)
self.do_clean_tests()
def do_sync1_tests(self, fail_type):
'''
Run workload while insync transition state, creates workload to be tested by following
transition phases.
@fail_type: failover type, can be mirror or primary
'''
list_cl = []
list_cl.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data"
)
self.test_case_scenario.append(list_cl)
list_set_sync1 = []
list_set_sync1.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.set_sync1.test_set_sync1.SetSync1TestCase"
)
self.test_case_scenario.append(list_set_sync1)
list_sync1 = []
list_sync1.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.sync1.test_sync1.Sync1TestCase"
)
self.test_case_scenario.append(list_sync1)
list_serial = []
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.sync1.vacuum.test_vacuum.VacuumTestCase"
)
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.check_mirror_seg"
)
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gpstate",
[fail_type, 'sync1']))
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",
{
'outputFile': 'sync1_checkcat.out'
}))
self.test_case_scenario.append(list_serial, serial=True)
def do_ck_sync1_tests(self):
'''
Run workload in insync but after pushing a checkpoint, in case heap data pages maybe in flight getting flushed to mirror
and not on primary.
'''
list_cl_and_ck = []
list_cl_and_ck.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data"
)
list_cl_and_ck.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.runcheckpoint.runCheckPointSQL.runCheckPointTestCase"
)
self.test_case_scenario.append(list_cl_and_ck, serial=True)
list_set_checkpoint_sync1 = []
list_set_checkpoint_sync1.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.set_ck_sync1.test_set_ck_sync1.SetCkSync1TestCase"
)
self.test_case_scenario.append(list_set_checkpoint_sync1)
list_checkpoint_sync1 = []
list_checkpoint_sync1.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.ck_sync1.test_ck_sync1.CkSync1TestCase"
)
self.test_case_scenario.append(list_checkpoint_sync1)
list_serial = []
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.ck_sync1.vacuum.test_vacuum.VacuumTestCase"
)
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",
{
'outputFile': 'ck_sync1_checkcat.out'
}))
self.test_case_scenario.append(list_serial, serial=True)
def do_ct_tests(self, fail_type):
'''
Run workload in change tracking
@fail_type: failover type, can be mirror or primary
'''
list = []
list.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data"
)
list.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.method_run_failover",
[fail_type]))
if (fail_type == 'mirror'):
list.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.trigger_transition"
)
list.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.wait_till_change_tracking_transition"
)
self.test_case_scenario.append(list, serial=True)
list_set_ct = []
list_set_ct.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.set_ct.test_set_ct.SetCtTestCase"
)
self.test_case_scenario.append(list_set_ct)
list_ct = []
list_ct.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.ct.test_ct.CtTestCase")
self.test_case_scenario.append(list_ct)
list_serial = []
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.ct.vacuum.test_vacuum.VacuumTestCase"
)
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",
{
'outputFile': 'ct_checkcat.out'
}))
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gpstate",
[fail_type, 'ct']))
self.test_case_scenario.append(list_serial, serial=True)
def do_resync_tests(self, rec_mode, fail_type):
'''
Suspend the transition to resync, trigger gprecoverseg, run workload.
@rec_mode: recovery type, can be full or incremental.
@fail_type: failover type, can be mirror or primary.
'''
list = []
list.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data"
)
list.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_method_suspendresync"
)
if ((rec_mode == 'incr') and (fail_type == 'primary')):
list.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.inject_fault_on_first_primary"
)
list.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gprecoverseg",
[rec_mode]))
list.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gpstate",
[fail_type, 'resync_' + rec_mode]))
self.test_case_scenario.append(list, serial=True)
list_set_resync = []
list_set_resync.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.set_resync.test_set_resync.SetResyncTestCase"
)
self.test_case_scenario.append(list_set_resync)
list_resync = []
list_resync.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.resync.test_resync.ResyncTestCase"
)
self.test_case_scenario.append(list_resync)
list_serial = []
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.resync.vacuum.test_vacuum.VacuumTestCase"
)
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",
{
'outputFile': 'resync_checkcat.out'
}))
self.test_case_scenario.append(list_serial, serial=True)
def do_sync2_tests(self, rec_mode, fail_type):
'''
Resume and reset the fault, bring cluster into insync, run workload, perform checkmirrorseg and check catalog.
'''
list_resume_validate = []
list_resume_validate.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data"
)
list_resume_validate.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.method_resume_filerep_resync"
)
list_resume_validate.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.method_reset_fault_injection"
)
if ((rec_mode == 'incr') and (fail_type == 'primary')):
list_resume_validate.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.inject_fault_on_first_mirror"
)
list_resume_validate.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.stop_start_validate",
[False]))
else:
list_resume_validate.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.stop_start_validate"
)
list_resume_validate.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.wait_till_insync_transition"
)
self.test_case_scenario.append(list_resume_validate, serial=True)
list_set_sync2 = []
list_set_sync2.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.set_sync2.test_set_sync2.SetSync2TestCase"
)
self.test_case_scenario.append(list_set_sync2)
list_sync2 = []
list_sync2.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.sync2.test_sync2.Sync2TestCase"
)
self.test_case_scenario.append(list_sync2)
list_serial = []
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.sync2.vacuum.test_vacuum.VacuumTestCase"
)
list_serial.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.check_mirror_seg"
)
list_serial.append((
"mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",
{
'outputFile': 'sync2_checkcat.out'
}))
self.test_case_scenario.append(list_serial, serial=True)
def do_clean_tests(self):
'''
Drop databases, tablespaces, and filespaces.
'''
list_cleanup = []
list_cleanup.append(
"mpp.gpdb.tests.storage.filerep_end_to_end.clean.test_clean.CleanTestCase"
)
self.test_case_scenario.append(list_cleanup)
class FilerepE2EScenarioTestCase(ScenarioTestCase, MPPTestCase):
"""
@gucs gp_create_table_random_default_distribution=off
"""
def __init__(self, methodName):
self.filerep = FilerepTestCase('preprocess')
self.path = local_path("data")
super(FilerepE2EScenarioTestCase,self).__init__(methodName)
def setUp(self):
'''
gpfdist port should be dynamically generated, this is a chance
that it may fail to start gpfdist service as other processes are
likely to be running on this specific port.
'''
super(FilerepE2EScenarioTestCase, self).setUp()
db = Database()
db.setupDatabase('gptest')
self.filerep.preprocess()
self.filerep.setupGpfdist('8088', self.path)
self.filerep.method_setup()
def tearDown(self):
self.filerep.cleanupGpfdist('8088', self.path)
super(FilerepE2EScenarioTestCase, self).tearDown()
@classmethod
def setUpClass(cls):
pass
@classmethod
def tearDownClass(cls):
pass
def test_incr_mirror(self):
self.do_test('incr','mirror')
def test_full_mirror(self):
self.do_test('full','mirror')
def test_incr_primary(self):
self.do_test('incr','primary')
def test_full_primary(self):
self.do_test('full', 'primary')
def test_flat_file_resync_on_checksum_mismatch(self):
filename = 'pg_distributedlog/FFFF'
# This should cause the md5 check to fail and trigger a resync of the flat files
self.filerep.create_file_in_datadir(0, 'p', filename)
try:
self.filerep.stop_start_validate()
self.filerep.verify_file_exists(0, 'm', filename)
finally:
self.filerep.remove_file_in_datadir(0, 'p', filename)
self.filerep.remove_file_in_datadir(0, 'm', filename)
def test_flat_file_resync_on_checksum_match(self):
filename = 'pg_distributedlog/FFFF'
self.filerep.create_file_in_datadir(0, 'p', filename)
self.filerep.create_file_in_datadir(0, 'm', filename)
try:
timestamp_before_restart = self.filerep.get_timestamp_of_file_in_datadir(0, 'm', filename)
self.filerep.stop_start_validate()
timestamp_after_restart = self.filerep.get_timestamp_of_file_in_datadir(0, 'm', filename)
self.assertEqual(timestamp_before_restart, timestamp_after_restart,
'File %s transferred after restart. timestamp before restart (%s), timestamp after restart (%s)' %
(filename, timestamp_before_restart, timestamp_after_restart))
finally:
self.filerep.remove_file_in_datadir(0, 'p', filename)
self.filerep.remove_file_in_datadir(0, 'm', filename)
def do_test(self,rec_mode,fail_type):
'''
@rec_mode: recovery mode, can be full or incremental
@fail_type, failover type, can be mirror or primary
'''
self.do_sync1_tests(fail_type)
self.do_ck_sync1_tests()
self.do_ct_tests(fail_type)
self.do_resync_tests(rec_mode, fail_type)
self.do_sync2_tests(rec_mode, fail_type)
self.do_clean_tests()
def do_sync1_tests(self, fail_type):
'''
Run workload while insync transition state, creates workload to be tested by following
transition phases.
@fail_type: failover type, can be mirror or primary
'''
list_cl = []
list_cl.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data")
self.test_case_scenario.append(list_cl)
list_set_sync1 = []
list_set_sync1.append("mpp.gpdb.tests.storage.filerep_end_to_end.set_sync1.test_set_sync1.SetSync1TestCase")
self.test_case_scenario.append(list_set_sync1)
list_sync1 = []
list_sync1.append("mpp.gpdb.tests.storage.filerep_end_to_end.sync1.test_sync1.Sync1TestCase")
self.test_case_scenario.append(list_sync1)
list_serial = []
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.sync1.vacuum.test_vacuum.VacuumTestCase")
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.check_mirror_seg")
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gpstate", [fail_type, 'sync1']))
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat", {'outputFile':'sync1_checkcat.out'}))
self.test_case_scenario.append(list_serial, serial=True)
def do_ck_sync1_tests(self):
'''
Run workload in insync but after pushing a checkpoint, in case heap data pages maybe in flight getting flushed to mirror
and not on primary.
'''
list_cl_and_ck = []
list_cl_and_ck.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data")
list_cl_and_ck.append("mpp.gpdb.tests.storage.filerep_end_to_end.runcheckpoint.runCheckPointSQL.runCheckPointTestCase")
self.test_case_scenario.append(list_cl_and_ck, serial=True)
list_set_checkpoint_sync1 = []
list_set_checkpoint_sync1.append("mpp.gpdb.tests.storage.filerep_end_to_end.set_ck_sync1.test_set_ck_sync1.SetCkSync1TestCase")
self.test_case_scenario.append(list_set_checkpoint_sync1)
list_checkpoint_sync1 = []
list_checkpoint_sync1.append("mpp.gpdb.tests.storage.filerep_end_to_end.ck_sync1.test_ck_sync1.CkSync1TestCase")
self.test_case_scenario.append(list_checkpoint_sync1)
list_serial = []
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.ck_sync1.vacuum.test_vacuum.VacuumTestCase")
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat", {'outputFile':'ck_sync1_checkcat.out'}))
self.test_case_scenario.append(list_serial, serial=True)
def do_ct_tests(self, fail_type):
'''
Run workload in change tracking
@fail_type: failover type, can be mirror or primary
'''
list = []
list.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data")
list.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.method_run_failover",[fail_type]))
if (fail_type=='mirror'):
list.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.trigger_transition")
list.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.wait_till_change_tracking_transition")
self.test_case_scenario.append(list,serial=True)
list_set_ct = []
list_set_ct.append("mpp.gpdb.tests.storage.filerep_end_to_end.set_ct.test_set_ct.SetCtTestCase")
self.test_case_scenario.append(list_set_ct)
list_ct = []
list_ct.append("mpp.gpdb.tests.storage.filerep_end_to_end.ct.test_ct.CtTestCase")
self.test_case_scenario.append(list_ct)
list_serial = []
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.ct.vacuum.test_vacuum.VacuumTestCase")
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",{'outputFile':'ct_checkcat.out'}))
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gpstate",[fail_type, 'ct']))
self.test_case_scenario.append(list_serial, serial=True)
def do_resync_tests(self, rec_mode, fail_type):
'''
Suspend the transition to resync, trigger gprecoverseg, run workload.
@rec_mode: recovery type, can be full or incremental.
@fail_type: failover type, can be mirror or primary.
'''
list = []
list.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data")
list.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_method_suspendresync")
if ((rec_mode == 'incr') and (fail_type == 'primary')):
list.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.inject_fault_on_first_primary");
list.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gprecoverseg",[rec_mode]))
list.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.run_gpstate",[fail_type,'resync_'+rec_mode]))
self.test_case_scenario.append(list, serial=True)
list_set_resync = []
list_set_resync.append("mpp.gpdb.tests.storage.filerep_end_to_end.set_resync.test_set_resync.SetResyncTestCase")
self.test_case_scenario.append(list_set_resync)
list_resync = []
list_resync.append("mpp.gpdb.tests.storage.filerep_end_to_end.resync.test_resync.ResyncTestCase")
self.test_case_scenario.append(list_resync)
list_serial = []
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.resync.vacuum.test_vacuum.VacuumTestCase")
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",{'outputFile':'resync_checkcat.out'}))
self.test_case_scenario.append(list_serial,serial=True)
def do_sync2_tests(self, rec_mode, fail_type):
'''
Resume and reset the fault, bring cluster into insync, run workload, perform checkmirrorseg and check catalog.
'''
list_resume_validate = []
list_resume_validate.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.clean_data")
list_resume_validate.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.method_resume_filerep_resync")
list_resume_validate.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.method_reset_fault_injection")
if ((rec_mode == 'incr') and (fail_type == 'primary')):
list_resume_validate.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.inject_fault_on_first_mirror");
list_resume_validate.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.stop_start_validate", [False]))
else:
list_resume_validate.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.stop_start_validate")
list_resume_validate.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.wait_till_insync_transition")
self.test_case_scenario.append(list_resume_validate,serial=True)
list_set_sync2 = []
list_set_sync2.append("mpp.gpdb.tests.storage.filerep_end_to_end.set_sync2.test_set_sync2.SetSync2TestCase")
self.test_case_scenario.append(list_set_sync2)
list_sync2 = []
list_sync2.append("mpp.gpdb.tests.storage.filerep_end_to_end.sync2.test_sync2.Sync2TestCase")
self.test_case_scenario.append(list_sync2)
list_serial = []
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.sync2.vacuum.test_vacuum.VacuumTestCase")
list_serial.append("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.check_mirror_seg")
list_serial.append(("mpp.gpdb.tests.storage.filerep_end_to_end.FilerepTestCase.do_gpcheckcat",{'outputFile':'sync2_checkcat.out'}))
self.test_case_scenario.append(list_serial,serial=True)
def do_clean_tests(self):
'''
Drop databases, tablespaces, and filespaces.
'''
list_cleanup = []
list_cleanup.append("mpp.gpdb.tests.storage.filerep_end_to_end.clean.test_clean.CleanTestCase")
self.test_case_scenario.append(list_cleanup)