예제 #1
0
 def test_daly_cellMinMaxVoltages(self):
     """test the decode of a cellMinMaxVoltages response"""
     protocol = pi()
     response = b"\xa5\x01\x91\x08\r\x00\x0f\x0c\xfe\x01\x03x\xe1"
     command = "cellMinMaxVoltages"
     # needed to initialise variables
     protocol.get_full_command(command)
     expected = {
         "raw_response": ["¥\x01\x91\x08\r\x00\x0f\x0cþ\x01\x03xá", ""],
         "_command": "cellMinMaxVoltages",
         "_command_description": "Cell Minimum and Maximum Voltages",
         "Maximum Cell Voltage": [3.328, "V"],
         "Maximum Cell Number": [15, ""],
         "Minimum Cell Voltage": [3.326, "V"],
         "Minimum Cell Number": [1, ""],
     }
     result = protocol.decode(response, command)
     # print(result)
     self.assertEqual(result, expected)
예제 #2
0
 def test_daly_mosStatus(self):
     """test the decode of a mosStatus response"""
     protocol = pi()
     response = b"\xa5\x01\x93\x08\x00\x01\x01\x9a\x00\x02\xa2\xd8Y"
     command = "mosStatus"
     # needed to initialise variables
     protocol.get_full_command(command)
     expected = {
         "raw_response": ["¥\x01\x93\x08\x00\x01\x01\x9a\x00\x02¢ØY", ""],
         "_command": "mosStatus",
         "_command_description": "mosStatus",
         "Charge Status": ["stationary", ""],
         "Charging MOS Tube Status": ["01", ""],
         "Discharging MOS Tube Status": ["01", ""],
         "BMS Life": [154, "cycles"],
         "Residual Capacity": [172.76, "AH"],
     }
     result = protocol.decode(response, command)
     # print(result)
     self.assertEqual(result, expected)
예제 #3
0
    def test_daly_SOC(self):
        """test the decode of a SOC response"""
        protocol = pi()

        response = b"\xa5\x01\x90\x08\x02\x14\x00\x00uE\x03x\x89"
        command = "SOC"
        # needed to initialise variables
        protocol.get_full_command(command)
        expected = {
            "raw_response": ["¥\x01\x90\x08\x02\x14\x00\x00uE\x03x\x89", ""],
            "_command": "SOC",
            "_command_description": "State of Charge",
            "Battery Bank Voltage": [53.2, "V"],
            "acquistion": [0.0, "V"],
            "Current": [2.1, "A"],
            "SOC": [88.8, "%"],
        }
        result = protocol.decode(response, command)
        # print(result)
        self.assertEqual(result, expected)
예제 #4
0
 def test_daly_status(self):
     """test the decode of a status response"""
     protocol = pi()
     response = b"\xa5\x01\x94\x08\x10\x01\x00\x00\x00\x00\x03@\x96"
     command = "status"
     # needed to initialise variables
     protocol.get_full_command(command)
     expected = {
         "raw_response":
         ["¥\x01\x94\x08\x10\x01\x00\x00\x00\x00\x03@\x96", ""],
         "_command": "status",
         "_command_description": "Status Information",
         "Number of Cells": [16, ""],
         "Number of Temperature Sensors": [1, ""],
         "Charger Status": ["disconnected", ""],
         "Load Status": ["disconnected", ""],
         "Flags (TODO)": ["00", ""],
         "Charge/Discharge Cycles": [3, "cycles"],
         "Reserved": ["40", ""],
     }
     result = protocol.decode(response, command)
     # print(result)
     self.assertEqual(result, expected)
예제 #5
0
 def test_daly_cellVoltages(self):
     """test the decode of a cellVoltages response"""
     protocol = pi()
     response = b"\xa5\x01\x95\x08\x01\x0c\xfd\x0c\xfe\x0c\xfe@\xa1\xa5\x01\x95\x08\x02\x0c\xfe\x0c\xfe\x0c\xfe@\xa3\xa5\x01\x95\x08\x03\x0c\xfe\x0c\xfe\x0c\xfe@\xa4\xa5\x01\x95\x08\x04\x0c\xfe\x0c\xfc\x0c\xfe@\xa3\xa5\x01\x95\x08\x05\x0c\xfe\x0c\xff\x0c\xfe@\xa7\xa5\x01\x95\x08\x06\x0c\xfc\x00\x00\x00\x00@\x91\xa5\x01\x95\x08\x07\x00\x00\x00\x00\x00\x00@\x8a\xa5\x01\x95\x08\x08\x00\x00\x00\x00\x00\x00@\x8b\xa5\x01\x95\x08\t\x00\x00\x00\x00\x00\x00@\x8c\xa5\x01\x95\x08\n\x00\x00\x00\x00\x00\x00@\x8d\xa5\x01\x95\x08\x0b\x00\x00\x00\x00\x00\x00@\x8e\xa5\x01\x95\x08\x0c\x00\x00\x00\x00\x00\x00@\x8f\xa5\x01\x95\x08\r\x00\x00\x00\x00\x00\x00@\x90\xa5\x01\x95\x08\x0e\x00\x00\x00\x00\x00\x00@\x91\xa5\x01\x95\x08\x0f\x00\x00\x00\x00\x00\x00@\x92\xa5\x01\x95\x08\x10\x00\x00\x00\x00\x00\x00@\x93"
     command = "cellVoltages"
     # needed to initialise variables
     protocol.get_full_command(command)
     expected = {
         "raw_response": [
             "¥\x01\x95\x08\x01\x0cý\x0cþ\x0cþ@¡¥\x01\x95\x08\x02\x0cþ\x0cþ\x0cþ@£¥\x01\x95\x08\x03\x0cþ\x0cþ\x0cþ@¤¥\x01\x95\x08\x04\x0cþ\x0cü\x0cþ@£¥\x01\x95\x08\x05\x0cþ\x0cÿ\x0cþ@§¥\x01\x95\x08\x06\x0cü\x00\x00\x00\x00@\x91¥\x01\x95\x08\x07\x00\x00\x00\x00\x00\x00@\x8a¥\x01\x95\x08\x08\x00\x00\x00\x00\x00\x00@\x8b¥\x01\x95\x08\t\x00\x00\x00\x00\x00\x00@\x8c¥\x01\x95\x08\n\x00\x00\x00\x00\x00\x00@\x8d¥\x01\x95\x08\x0b\x00\x00\x00\x00\x00\x00@\x8e¥\x01\x95\x08\x0c\x00\x00\x00\x00\x00\x00@\x8f¥\x01\x95\x08\r\x00\x00\x00\x00\x00\x00@\x90¥\x01\x95\x08\x0e\x00\x00\x00\x00\x00\x00@\x91¥\x01\x95\x08\x0f\x00\x00\x00\x00\x00\x00@\x92¥\x01\x95\x08\x10\x00\x00\x00\x00\x00\x00@\x93",
             "",
         ],
         "_command":
         "cellVoltages",
         "_command_description":
         "Cell Voltages Information",
         "Cell 01 Voltage": [3.325, "V"],
         "Cell 02 Voltage": [3.326, "V"],
         "Cell 03 Voltage": [3.326, "V"],
         "Cell 04 Voltage": [3.326, "V"],
         "Cell 05 Voltage": [3.326, "V"],
         "Cell 06 Voltage": [3.326, "V"],
         "Cell 07 Voltage": [3.326, "V"],
         "Cell 08 Voltage": [3.326, "V"],
         "Cell 09 Voltage": [3.326, "V"],
         "Cell 10 Voltage": [3.326, "V"],
         "Cell 11 Voltage": [3.324, "V"],
         "Cell 12 Voltage": [3.326, "V"],
         "Cell 13 Voltage": [3.326, "V"],
         "Cell 14 Voltage": [3.327, "V"],
         "Cell 15 Voltage": [3.326, "V"],
         "Cell 16 Voltage": [3.324, "V"],
         "Cell 17 Voltage": [0.0, "V"],
         "Cell 18 Voltage": [0.0, "V"],
         "Cell 19 Voltage": [0.0, "V"],
         "Cell 20 Voltage": [0.0, "V"],
         "Cell 21 Voltage": [0.0, "V"],
         "Cell 22 Voltage": [0.0, "V"],
         "Cell 23 Voltage": [0.0, "V"],
         "Cell 24 Voltage": [0.0, "V"],
         "Cell 25 Voltage": [0.0, "V"],
         "Cell 26 Voltage": [0.0, "V"],
         "Cell 27 Voltage": [0.0, "V"],
         "Cell 28 Voltage": [0.0, "V"],
         "Cell 29 Voltage": [0.0, "V"],
         "Cell 30 Voltage": [0.0, "V"],
         "Cell 31 Voltage": [0.0, "V"],
         "Cell 32 Voltage": [0.0, "V"],
         "Cell 33 Voltage": [0.0, "V"],
         "Cell 34 Voltage": [0.0, "V"],
         "Cell 35 Voltage": [0.0, "V"],
         "Cell 36 Voltage": [0.0, "V"],
         "Cell 37 Voltage": [0.0, "V"],
         "Cell 38 Voltage": [0.0, "V"],
         "Cell 39 Voltage": [0.0, "V"],
         "Cell 40 Voltage": [0.0, "V"],
         "Cell 41 Voltage": [0.0, "V"],
         "Cell 42 Voltage": [0.0, "V"],
         "Cell 43 Voltage": [0.0, "V"],
         "Cell 44 Voltage": [0.0, "V"],
         "Cell 45 Voltage": [0.0, "V"],
         "Cell 46 Voltage": [0.0, "V"],
         "Cell 47 Voltage": [0.0, "V"],
         "Cell 48 Voltage": [0.0, "V"],
     }
     result = protocol.decode(response, command)
     # print(result)
     self.assertEqual(result, expected)