def __init__(self, samples, sa=None, fa=None, a=None):
"""
A Dataset might have an arbitrary number of attributes for samples,
features, or the dataset as a whole. However, only the data samples
themselves are required.
Parameters
----------
samples : ndarray
Data samples. This has to be a two-dimensional (samples x features)
array. If the samples are not in that format, please consider one of
the `AttrDataset.from_*` classmethods.
sa : SampleAttributesCollection
Samples attributes collection.
fa : FeatureAttributesCollection
Features attributes collection.
a : DatasetAttributesCollection
Dataset attributes collection.
"""
# conversions
if isinstance(samples, list):
samples = np.array(samples)
# Check all conditions we need to have for `samples` dtypes
if not hasattr(samples, 'dtype'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`dtype` attribute that behaves similar to the one of an "
"array-like.")
if not hasattr(samples, 'shape'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`shape` attribute that behaves similar to the one of an "
"array-like.")
if not len(samples.shape):
raise ValueError("Only `samples` with at least one axis are "
"supported (got: %i)" % len(samples.shape))
# handling of 1D-samples
# i.e. 1D is treated as multiple samples with a single feature
if len(samples.shape) == 1:
samples = np.atleast_2d(samples).T
# that's all -- accepted
self.samples = samples
# Everything in a dataset (except for samples) is organized in
# collections
# Number of samples is .shape[0] for sparse matrix support
self.sa = SampleAttributesCollection(length=len(self))
if not sa is None:
self.sa.update(sa)
self.fa = FeatureAttributesCollection(length=self.nfeatures)
if not fa is None:
self.fa.update(fa)
self.a = DatasetAttributesCollection()
if not a is None:
self.a.update(a)
def __init__(self, samples, sa=None, fa=None, a=None):
"""
A Dataset might have an arbitrary number of attributes for samples,
features, or the dataset as a whole. However, only the data samples
themselves are required.
Parameters
----------
samples : ndarray
Data samples. This has to be a two-dimensional (samples x features)
array. If the samples are not in that format, please consider one of
the `AttrDataset.from_*` classmethods.
sa : SampleAttributesCollection
Samples attributes collection.
fa : FeatureAttributesCollection
Features attributes collection.
a : DatasetAttributesCollection
Dataset attributes collection.
"""
# conversions
if isinstance(samples, list):
samples = np.array(samples)
# Check all conditions we need to have for `samples` dtypes
if not hasattr(samples, "dtype"):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`dtype` attribute that behaves similar to the one of an "
"array-like."
)
if not hasattr(samples, "shape"):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`shape` attribute that behaves similar to the one of an "
"array-like."
)
if not len(samples.shape):
raise ValueError("Only `samples` with at least one axis are " "supported (got: %i)" % len(samples.shape))
# handling of 1D-samples
# i.e. 1D is treated as multiple samples with a single feature
if len(samples.shape) == 1:
samples = np.atleast_2d(samples).T
# that's all -- accepted
self.samples = samples
# Everything in a dataset (except for samples) is organized in
# collections
# Number of samples is .shape[0] for sparse matrix support
self.sa = SampleAttributesCollection(length=len(self))
if not sa is None:
self.sa.update(sa)
self.fa = FeatureAttributesCollection(length=self.nfeatures)
if not fa is None:
self.fa.update(fa)
self.a = DatasetAttributesCollection()
if not a is None:
self.a.update(a)
def gifti_dataset(samples, targets=None, chunks=None):
"""
Parameters
----------
samples : str or GiftiImage
GIFTI surface-based data, specified either as a filename or an image.
targets : scalar or sequence
Label attribute for each volume in the timeseries.
chunks : scalar or sequence
Chunk attribute for each volume in the timeseries.
"""
node_indices = None
data_vectors = []
intents = []
image = _get_gifti_image(samples)
for darray in image.darrays:
intent_string = _gifti_intent_niistring(darray.intent)
if _gifti_intent_is_data(intent_string):
data_vectors.append(darray.data)
intents.append(intent_string)
elif _gifti_intent_is_node_indices(intent_string):
node_indices = darray.data
samples = np.asarray(data_vectors)
nsamples, nfeatures = samples.shape
# set sample attributes
sa = SampleAttributesCollection(length=nsamples)
sa['intents'] = intents
if targets is not None:
sa['targets'] = targets
if chunks is not None:
sa['chunks'] = chunks
# set feature attributes
fa = FeatureAttributesCollection(length=nfeatures)
if node_indices is not None:
fa['node_indices'] = node_indices
return Dataset(samples=samples, sa=sa, fa=fa)
def _edit_attr(self, ds, shape):
attr = dict()
for key in ds.sa.keys():
attr[key] = []
for v in ds.sa[key].value:
attr[key] += [v for _ in range(shape[1])]
attr['roi_labels'] = []
for _ in range(shape[0] / shape[1]):
for i in range(shape[1]):
attr['roi_labels'] += ["roi_%02d" % (i + 1)]
logger.debug(shape)
return SampleAttributesCollection(attr)
def test_collections():
sa = SampleAttributesCollection()
assert_equal(len(sa), 0)
assert_raises(ValueError, sa.__setitem__, 'test', 0)
l = range(5)
sa['test'] = l
# auto-wrapped
assert_true(isinstance(sa['test'], ArrayCollectable))
assert_equal(len(sa), 1)
# names which are already present in dict interface
assert_raises(ValueError, sa.__setitem__, 'values', range(5))
sa_c = copy.deepcopy(sa)
assert_equal(len(sa), len(sa_c))
assert_array_equal(sa.test, sa_c.test)
def edit_attr(attr, shape):
factor = shape[0] / len(attr.targets)
attr_ = dict()
for key in attr.keys():
attr_[key] = []
for label in attr[key]:
attr_[key] += [label for i in range(factor)]
"""
attr_['roi_labels'] = []
for j in range(len(attr.targets)):
for i in range(shape[1]):
attr_['roi_labels'] += ["roi_%02d" % (i+1)]
"""
return SampleAttributesCollection(
attr_), None #attr_['roi_labels'][:shape[1]]
class AttrDataset(object):
"""Generic storage class for datasets with multiple attributes.
A dataset consists of four pieces. The core is a two-dimensional
array that has variables (so-called `features`) in its columns and
the associated observations (so-called `samples`) in the rows. In
addition a dataset may have any number of attributes for features
and samples. Unsurprisingly, these are called 'feature attributes'
and 'sample attributes'. Each attribute is a vector of any datatype
that contains a value per each item (feature or sample). Both types
of attributes are organized in their respective collections --
accessible via the `sa` (sample attribute) and `fa` (feature
attribute) attributes. Finally, a dataset itself may have any number
of additional attributes (i.e. a mapper) that are stored in their
own collection that is accessible via the `a` attribute (see
examples below).
Attributes
----------
sa : Collection
Access to all sample attributes, where each attribute is a named
vector (1d-array) of an arbitrary datatype, with as many elements
as rows in the `samples` array of the dataset.
fa : Collection
Access to all feature attributes, where each attribute is a named
vector (1d-array) of an arbitrary datatype, with as many elements
as columns in the `samples` array of the dataset.
a : Collection
Access to all dataset attributes, where each attribute is a named
element of an arbitrary datatype.
Notes
-----
Any dataset might have a mapper attached that is stored as a dataset
attribute called `mapper`.
Examples
--------
The simplest way to create a dataset is from a 2D array.
>>> import numpy as np
>>> from mvpa2.datasets import *
>>> samples = np.arange(12).reshape((4,3))
>>> ds = AttrDataset(samples)
>>> ds.nsamples
4
>>> ds.nfeatures
3
>>> ds.samples
array([[ 0, 1, 2],
[ 3, 4, 5],
[ 6, 7, 8],
[ 9, 10, 11]])
The above dataset can only be used for unsupervised machine-learning
algorithms, since it doesn't have any targets associated with its
samples. However, creating a labeled dataset is equally simple.
>>> ds_labeled = dataset_wizard(samples, targets=range(4))
Both the labeled and the unlabeled dataset share the same samples
array. No copying is performed.
>>> ds.samples is ds_labeled.samples
True
If the data should not be shared the samples array has to be copied
beforehand.
The targets are available from the samples attributes collection, but
also via the convenience property `targets`.
>>> ds_labeled.sa.targets is ds_labeled.targets
True
If desired, it is possible to add an arbitrary amount of additional
attributes. Regardless if their original sequence type they will be
converted into an array.
>>> ds_labeled.sa['lovesme'] = [0,0,1,0]
>>> ds_labeled.sa.lovesme
array([0, 0, 1, 0])
An alternative method to create datasets with arbitrary attributes
is to provide the attribute collections to the constructor itself --
which would also test for an appropriate size of the given
attributes:
>>> fancyds = AttrDataset(samples, sa={'targets': range(4),
... 'lovesme': [0,0,1,0]})
>>> fancyds.sa.lovesme
array([0, 0, 1, 0])
Exactly the same logic applies to feature attributes as well.
Datasets can be sliced (selecting a subset of samples and/or
features) similar to arrays. Selection is possible using boolean
selection masks, index sequences or slicing arguments. The following
calls for samples selection all result in the same dataset:
>>> sel1 = ds[np.array([False, True, True])]
>>> sel2 = ds[[1,2]]
>>> sel3 = ds[1:3]
>>> np.all(sel1.samples == sel2.samples)
True
>>> np.all(sel2.samples == sel3.samples)
True
During selection data is only copied if necessary. If the slicing
syntax is used the resulting dataset will share the samples with the
original dataset (here and below we compare .base against both ds.samples
and its .base for compatibility with NumPy < 1.7)
>>> sel1.samples.base in (ds.samples.base, ds.samples)
False
>>> sel2.samples.base in (ds.samples.base, ds.samples)
False
>>> sel3.samples.base in (ds.samples.base, ds.samples)
True
For feature selection the syntax is very similar they are just
represented on the second axis of the samples array. Plain feature
selection is achieved be keeping all samples and select a subset of
features (all syntax variants for samples selection are also
supported for feature selection).
>>> fsel = ds[:, 1:3]
>>> fsel.samples
array([[ 1, 2],
[ 4, 5],
[ 7, 8],
[10, 11]])
It is also possible to simultaneously selection a subset of samples
*and* features. Using the slicing syntax now copying will be
performed.
>>> fsel = ds[:3, 1:3]
>>> fsel.samples
array([[1, 2],
[4, 5],
[7, 8]])
>>> fsel.samples.base in (ds.samples.base, ds.samples)
True
Please note that simultaneous selection of samples and features is
*not* always congruent to array slicing.
>>> ds[[0,1,2], [1,2]].samples
array([[1, 2],
[4, 5],
[7, 8]])
Whereas the call: 'ds.samples[[0,1,2], [1,2]]' would not be
possible. In `AttrDatasets` selection of samples and features is always
applied individually and independently to each axis.
"""
def __init__(self, samples, sa=None, fa=None, a=None):
"""
A Dataset might have an arbitrary number of attributes for samples,
features, or the dataset as a whole. However, only the data samples
themselves are required.
Parameters
----------
samples : ndarray
Data samples. This has to be a two-dimensional (samples x features)
array. If the samples are not in that format, please consider one of
the `AttrDataset.from_*` classmethods.
sa : SampleAttributesCollection
Samples attributes collection.
fa : FeatureAttributesCollection
Features attributes collection.
a : DatasetAttributesCollection
Dataset attributes collection.
"""
# conversions
if isinstance(samples, list):
samples = np.array(samples)
# Check all conditions we need to have for `samples` dtypes
if not hasattr(samples, 'dtype'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`dtype` attribute that behaves similar to the one of an "
"array-like.")
if not hasattr(samples, 'shape'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`shape` attribute that behaves similar to the one of an "
"array-like.")
if not len(samples.shape):
raise ValueError("Only `samples` with at least one axis are "
"supported (got: %i)" % len(samples.shape))
# handling of 1D-samples
# i.e. 1D is treated as multiple samples with a single feature
if len(samples.shape) == 1:
samples = np.atleast_2d(samples).T
# that's all -- accepted
self.samples = samples
# Everything in a dataset (except for samples) is organized in
# collections
# Number of samples is .shape[0] for sparse matrix support
self.sa = SampleAttributesCollection(length=len(self))
if not sa is None:
self.sa.update(sa)
self.fa = FeatureAttributesCollection(length=self.nfeatures)
if not fa is None:
self.fa.update(fa)
self.a = DatasetAttributesCollection()
if not a is None:
self.a.update(a)
def init_origids(self, which, attr='origids', mode='new'):
"""Initialize the dataset's 'origids' attribute.
The purpose of origids is that they allow to track the identity of
a feature or a sample through the lifetime of a dataset (i.e. subsequent
feature selections).
Calling this method will overwrite any potentially existing IDs (of the
XXX)
Parameters
----------
which : {'features', 'samples', 'both'}
An attribute is generated for each feature, sample, or both that
represents a unique ID. This ID incorporates the dataset instance ID
and should allow merging multiple datasets without causing multiple
identical ID and the resulting dataset.
attr : str
Name of the attribute to store the generated IDs in. By convention
this should be 'origids' (the default), but might be changed for
specific purposes.
mode : {'existing', 'new', 'raise'}, optional
Action if `attr` is already present in the collection.
Default behavior is 'new' whenever new ids are generated and
replace existing values if such are present. With 'existing' it would
not alter existing content. With 'raise' it would raise
`RuntimeError`.
Raises
------
`RuntimeError`
If `mode` == 'raise' and `attr` is already defined
"""
# now do evil to ensure unique ids across multiple datasets
# so that they could be merged together
thisid = str(id(self))
legal_modes = ('raise', 'existing', 'new')
if not mode in legal_modes:
raise ValueError, "Incorrect mode %r. Known are %s." % \
(mode, legal_modes)
if which in ('samples', 'both'):
if attr in self.sa:
if mode == 'existing':
return
elif mode == 'raise':
raise RuntimeError, \
"Attribute %r already known to %s" % (attr, self.sa)
ids = np.array(['%s-%i' % (thisid, i)
for i in range(self.samples.shape[0])])
if self.sa.has_key(attr):
self.sa[attr].value = ids
else:
self.sa[attr] = ids
if which in ('features', 'both'):
if attr in self.sa:
if mode == 'existing':
return
elif mode == 'raise':
raise RuntimeError, \
"Attribute %r already known to %s" % (attr, self.fa)
ids = np.array(['%s-%i' % (thisid, i)
for i in range(self.samples.shape[1])])
if self.fa.has_key(attr):
self.fa[attr].value = ids
else:
self.fa[attr] = ids
def __copy__(self):
return self.copy(deep=False)
def __deepcopy__(self, memo=None):
return self.copy(deep=True, memo=memo)
def __reduce__(self):
return (self.__class__,
(self.samples,
dict(self.sa),
dict(self.fa),
dict(self.a)))
def copy(self, deep=True, sa=None, fa=None, a=None, memo=None):
"""Create a copy of a dataset.
By default this is going to return a deep copy of the dataset, hence no
data would be shared between the original dataset and its copy.
Parameters
----------
deep : boolean, optional
If False, a shallow copy of the dataset is return instead. The copy
contains only views of the samples, sample attributes and feature
attributes, as well as shallow copies of all dataset
attributes.
sa : list or None
List of attributes in the sample attributes collection to include in
the copy of the dataset. If `None` all attributes are considered. If
an empty list is given, all attributes are stripped from the copy.
fa : list or None
List of attributes in the feature attributes collection to include in
the copy of the dataset. If `None` all attributes are considered If
an empty list is given, all attributes are stripped from the copy.
a : list or None
List of attributes in the dataset attributes collection to include in
the copy of the dataset. If `None` all attributes are considered If
an empty list is given, all attributes are stripped from the copy.
memo : dict
Developers only: This argument is only useful if copy() is called
inside the __deepcopy__() method and refers to the dict-argument
`memo` in the Python documentation.
"""
if __debug__:
debug('DS_', "Duplicating samples shaped %s"
% str(self.samples.shape))
if deep:
samples = copy.deepcopy(self.samples, memo)
else:
samples = self.samples.view()
if __debug__:
debug('DS_', "Create new dataset instance for copy")
# call the generic init
out = self.__class__(samples,
sa=self.sa.copy(a=sa, deep=deep, memo=memo),
fa=self.fa.copy(a=fa, deep=deep, memo=memo),
a=self.a.copy(a=a, deep=deep, memo=memo))
if __debug__:
debug('DS_', "Return dataset copy %s of source %s"
% (_strid(out), _strid(self)))
return out
def append(self, other):
"""This method should not be used and will be removed in the future"""
warning("AttrDataset.append() is deprecated and will be removed. "
"Instead of ds.append(x) use: ds = vstack((ds, x), a=0)")
if not self.nfeatures == other.nfeatures:
raise DatasetError("Cannot merge datasets, because the number of "
"features does not match.")
if not sorted(self.sa.keys()) == sorted(other.sa.keys()):
raise DatasetError("Cannot merge dataset. This datasets samples "
"attributes %s cannot be mapped into the other "
"set %s" % (self.sa.keys(), other.sa.keys()))
# concat the samples as well
self.samples = np.concatenate((self.samples, other.samples), axis=0)
# tell the collection the new desired length of all attributes
self.sa.set_length_check(len(self.samples))
# concat all samples attributes
for k, v in other.sa.iteritems():
self.sa[k].value = np.concatenate((self.sa[k].value, v.value),
axis=0)
def __getitem__(self, args):
"""
"""
# uniformize for checks below; it is not a tuple if just single slicing
# spec is passed
if not isinstance(args, tuple):
args = (args,)
if len(args) > 2:
raise ValueError("Too many arguments (%i). At most there can be "
"two arguments, one for samples selection and one "
"for features selection" % len(args))
# simplify things below and always have samples and feature slicing
if len(args) == 1:
args = [args[0], slice(None)]
else:
args = [a for a in args]
samples = None
# get the intended subset of the samples array
#
# need to deal with some special cases to ensure proper behavior
#
# ints need to become lists to prevent silent dimensionality changes
# of the arrays when slicing
for i, a in enumerate(args):
if isinstance(a, int):
args[i] = [a]
# for simultaneous slicing of numpy arrays we should
# distinguish the case when one of the args is a slice, so no
# ix_ is needed
if __debug__:
debug('DS_', "Selecting feature/samples of %s" % str(self.samples.shape))
if isinstance(self.samples, np.ndarray):
if np.any([isinstance(a, slice) for a in args]):
samples = self.samples[args[0], args[1]]
else:
# works even with bool masks (although without
# assurance/checking if mask is of actual length as
# needed, so would work with bogus shorter
# masks). TODO check in __debug__? or may be just do
# enforcing of proper dimensions and order manually?
samples = self.samples[np.ix_(*args)]
else:
# in all other cases we have to do the selection sequentially
#
# samples subset: only alter if subset is requested
samples = self.samples[args[0]]
# features subset
if not args[1] is slice(None):
samples = samples[:, args[1]]
if __debug__:
debug('DS_', "Selected feature/samples %s" % str(self.samples.shape))
# and now for the attributes -- we want to maintain the type of the
# collections
sa = self.sa.__class__(length=samples.shape[0])
fa = self.fa.__class__(length=samples.shape[1])
a = self.a.__class__()
# per-sample attributes; always needs to run even if slice(None), since
# we need fresh SamplesAttributes even if they share the data
for attr in self.sa.values():
# preserve attribute type
newattr = attr.__class__(doc=attr.__doc__)
# slice
newattr.value = attr.value[args[0]]
# assign to target collection
sa[attr.name] = newattr
# per-feature attributes; always needs to run even if slice(None),
# since we need fresh SamplesAttributes even if they share the data
for attr in self.fa.values():
# preserve attribute type
newattr = attr.__class__(doc=attr.__doc__)
# slice
newattr.value = attr.value[args[1]]
# assign to target collection
fa[attr.name] = newattr
# and finally dataset attributes: this time copying
for attr in self.a.values():
# preserve attribute type
newattr = attr.__class__(name=attr.name, doc=attr.__doc__)
# do a shallow copy here
# XXX every DatasetAttribute should have meaningful __copy__ if
# necessary -- most likely all mappers need to have one
newattr.value = copy.copy(attr.value)
# assign to target collection
a[attr.name] = newattr
# and after a long way instantiate the new dataset of the same type
return self.__class__(samples, sa=sa, fa=fa, a=a)
def __repr_full__(self):
return "%s(%s, sa=%s, fa=%s, a=%s)" \
% (self.__class__.__name__,
repr(self.samples),
repr(self.sa),
repr(self.fa),
repr(self.a))
def __str__(self):
samplesstr = 'x'.join(["%s" % x for x in self.shape])
samplesstr += '@%s' % self.samples.dtype
cols = [str(col).replace(col.__class__.__name__, label)
for col, label in [(self.sa, 'sa'),
(self.fa, 'fa'),
(self.a, 'a')] if len(col)]
# include only collections that have content
return _str(self, samplesstr, *cols)
__repr__ = {'full' : __repr_full__,
'str' : __str__}[__REPR_STYLE__]
def __array__(self, *args):
"""Provide an 'array' view or copy over dataset.samples
Parameters
----------
dtype: type, optional
If provided, passed to .samples.__array__() call
*args to mimique numpy.ndarray.__array__ behavior which relies
on the actual number of arguments
"""
# another possibility would be converting .todense() for sparse data
# but that might easily kill the machine ;-)
if not hasattr(self.samples, '__array__'):
raise RuntimeError(
"This AttrDataset instance cannot be used like a Numpy array "
"since its data-container does not provide an '__array__' "
"methods. Container type is %s." % type(self.samples))
return self.samples.__array__(*args)
def __len__(self):
return self.shape[0]
@classmethod
def from_hdf5(cls, source, name=None):
"""Load a Dataset from HDF5 file
Parameters
----------
source : string or h5py.highlevel.File
Filename or HDF5's File to load dataset from
name : string, optional
If file contains multiple entries at the 1st level, if
provided, `name` specifies the group to be loaded as the
AttrDataset.
Returns
-------
AttrDataset
Raises
------
ValueError
"""
if not externals.exists('h5py'):
raise RuntimeError(
"Missing 'h5py' package -- saving is not possible.")
import h5py
from mvpa2.base.hdf5 import hdf2obj
# look if we got an hdf file instance already
if isinstance(source, h5py.highlevel.File):
own_file = False
hdf = source
else:
own_file = True
hdf = h5py.File(source, 'r')
if not name is None:
# some HDF5 subset is requested
if not name in hdf:
raise ValueError("Cannot find '%s' group in HDF file %s. "
"File contains groups: %s"
% (name, source, hdf.keys()))
# access the group that should contain the dataset
dsgrp = hdf[name]
res = hdf2obj(dsgrp)
if not isinstance(res, AttrDataset):
# TODO: unittest before committing
raise ValueError, "%r in %s contains %s not a dataset. " \
"File contains groups: %s." \
% (name, source, type(res), hdf.keys())
else:
# just consider the whole file
res = hdf2obj(hdf)
if not isinstance(res, AttrDataset):
# TODO: unittest before committing
raise ValueError, "Failed to load a dataset from %s. " \
"Loaded %s instead." \
% (source, type(res))
if own_file:
hdf.close()
return res
# shortcut properties
nsamples = property(fget=len)
nfeatures = property(fget=lambda self:self.shape[1])
shape = property(fget=lambda self:self.samples.shape)
class AttrDataset(object):
"""Generic storage class for datasets with multiple attributes.
A dataset consists of four pieces. The core is a two-dimensional
array that has variables (so-called `features`) in its columns and
the associated observations (so-called `samples`) in the rows. In
addition a dataset may have any number of attributes for features
and samples. Unsurprisingly, these are called 'feature attributes'
and 'sample attributes'. Each attribute is a vector of any datatype
that contains a value per each item (feature or sample). Both types
of attributes are organized in their respective collections --
accessible via the `sa` (sample attribute) and `fa` (feature
attribute) attributes. Finally, a dataset itself may have any number
of additional attributes (i.e. a mapper) that are stored in their
own collection that is accessible via the `a` attribute (see
examples below).
Attributes
----------
sa : Collection
Access to all sample attributes, where each attribute is a named
vector (1d-array) of an arbitrary datatype, with as many elements
as rows in the `samples` array of the dataset.
fa : Collection
Access to all feature attributes, where each attribute is a named
vector (1d-array) of an arbitrary datatype, with as many elements
as columns in the `samples` array of the dataset.
a : Collection
Access to all dataset attributes, where each attribute is a named
element of an arbitrary datatype.
Notes
-----
Any dataset might have a mapper attached that is stored as a dataset
attribute called `mapper`.
Examples
--------
The simplest way to create a dataset is from a 2D array.
>>> import numpy as np
>>> from mvpa2.datasets import *
>>> samples = np.arange(12).reshape((4,3))
>>> ds = AttrDataset(samples)
>>> ds.nsamples
4
>>> ds.nfeatures
3
>>> ds.samples
array([[ 0, 1, 2],
[ 3, 4, 5],
[ 6, 7, 8],
[ 9, 10, 11]])
The above dataset can only be used for unsupervised machine-learning
algorithms, since it doesn't have any targets associated with its
samples. However, creating a labeled dataset is equally simple.
>>> ds_labeled = dataset_wizard(samples, targets=range(4))
Both the labeled and the unlabeled dataset share the same samples
array. No copying is performed.
>>> ds.samples is ds_labeled.samples
True
If the data should not be shared the samples array has to be copied
beforehand.
The targets are available from the samples attributes collection, but
also via the convenience property `targets`.
>>> ds_labeled.sa.targets is ds_labeled.targets
True
If desired, it is possible to add an arbitrary amount of additional
attributes. Regardless if their original sequence type they will be
converted into an array.
>>> ds_labeled.sa['lovesme'] = [0,0,1,0]
>>> ds_labeled.sa.lovesme
array([0, 0, 1, 0])
An alternative method to create datasets with arbitrary attributes
is to provide the attribute collections to the constructor itself --
which would also test for an appropriate size of the given
attributes:
>>> fancyds = AttrDataset(samples, sa={'targets': range(4),
... 'lovesme': [0,0,1,0]})
>>> fancyds.sa.lovesme
array([0, 0, 1, 0])
Exactly the same logic applies to feature attributes as well.
Datasets can be sliced (selecting a subset of samples and/or
features) similar to arrays. Selection is possible using boolean
selection masks, index sequences or slicing arguments. The following
calls for samples selection all result in the same dataset:
>>> sel1 = ds[np.array([False, True, True])]
>>> sel2 = ds[[1,2]]
>>> sel3 = ds[1:3]
>>> np.all(sel1.samples == sel2.samples)
True
>>> np.all(sel2.samples == sel3.samples)
True
During selection data is only copied if necessary. If the slicing
syntax is used the resulting dataset will share the samples with the
original dataset.
>>> sel1.samples.base is ds.samples.base
False
>>> sel2.samples.base is ds.samples.base
False
>>> sel3.samples.base is ds.samples.base
True
For feature selection the syntax is very similar they are just
represented on the second axis of the samples array. Plain feature
selection is achieved be keeping all samples and select a subset of
features (all syntax variants for samples selection are also
supported for feature selection).
>>> fsel = ds[:, 1:3]
>>> fsel.samples
array([[ 1, 2],
[ 4, 5],
[ 7, 8],
[10, 11]])
It is also possible to simultaneously selection a subset of samples
*and* features. Using the slicing syntax now copying will be
performed.
>>> fsel = ds[:3, 1:3]
>>> fsel.samples
array([[1, 2],
[4, 5],
[7, 8]])
>>> fsel.samples.base is ds.samples.base
True
Please note that simultaneous selection of samples and features is
*not* always congruent to array slicing.
>>> ds[[0,1,2], [1,2]].samples
array([[1, 2],
[4, 5],
[7, 8]])
Whereas the call: 'ds.samples[[0,1,2], [1,2]]' would not be
possible. In `AttrDatasets` selection of samples and features is always
applied individually and independently to each axis.
"""
def __init__(self, samples, sa=None, fa=None, a=None):
"""
A Dataset might have an arbitrary number of attributes for samples,
features, or the dataset as a whole. However, only the data samples
themselves are required.
Parameters
----------
samples : ndarray
Data samples. This has to be a two-dimensional (samples x features)
array. If the samples are not in that format, please consider one of
the `AttrDataset.from_*` classmethods.
sa : SampleAttributesCollection
Samples attributes collection.
fa : FeatureAttributesCollection
Features attributes collection.
a : DatasetAttributesCollection
Dataset attributes collection.
"""
# conversions
if isinstance(samples, list):
samples = np.array(samples)
# Check all conditions we need to have for `samples` dtypes
if not hasattr(samples, 'dtype'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`dtype` attribute that behaves similar to the one of an "
"array-like.")
if not hasattr(samples, 'shape'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`shape` attribute that behaves similar to the one of an "
"array-like.")
if not len(samples.shape):
raise ValueError("Only `samples` with at least one axis are "
"supported (got: %i)" % len(samples.shape))
# handling of 1D-samples
# i.e. 1D is treated as multiple samples with a single feature
if len(samples.shape) == 1:
samples = np.atleast_2d(samples).T
# that's all -- accepted
self.samples = samples
# Everything in a dataset (except for samples) is organized in
# collections
# Number of samples is .shape[0] for sparse matrix support
self.sa = SampleAttributesCollection(length=len(self))
if not sa is None:
self.sa.update(sa)
self.fa = FeatureAttributesCollection(length=self.nfeatures)
if not fa is None:
self.fa.update(fa)
self.a = DatasetAttributesCollection()
if not a is None:
self.a.update(a)
def init_origids(self, which, attr='origids', mode='new'):
"""Initialize the dataset's 'origids' attribute.
The purpose of origids is that they allow to track the identity of
a feature or a sample through the lifetime of a dataset (i.e. subsequent
feature selections).
Calling this method will overwrite any potentially existing IDs (of the
XXX)
Parameters
----------
which : {'features', 'samples', 'both'}
An attribute is generated for each feature, sample, or both that
represents a unique ID. This ID incorporates the dataset instance ID
and should allow merging multiple datasets without causing multiple
identical ID and the resulting dataset.
attr : str
Name of the attribute to store the generated IDs in. By convention
this should be 'origids' (the default), but might be changed for
specific purposes.
mode : {'existing', 'new', 'raise'}, optional
Action if `attr` is already present in the collection.
Default behavior is 'new' whenever new ids are generated and
replace existing values if such are present. With 'existing' it would
not alter existing content. With 'raise' it would raise
`RuntimeError`.
Raises
------
`RuntimeError`
If `mode` == 'raise' and `attr` is already defined
"""
# now do evil to ensure unique ids across multiple datasets
# so that they could be merged together
thisid = str(id(self))
legal_modes = ('raise', 'existing', 'new')
if not mode in legal_modes:
raise ValueError, "Incorrect mode %r. Known are %s." % \
(mode, legal_modes)
if which in ('samples', 'both'):
if attr in self.sa:
if mode == 'existing':
return
elif mode == 'raise':
raise RuntimeError, \
"Attribute %r already known to %s" % (attr, self.sa)
ids = np.array(
['%s-%i' % (thisid, i) for i in xrange(self.samples.shape[0])])
if self.sa.has_key(attr):
self.sa[attr].value = ids
else:
self.sa[attr] = ids
if which in ('features', 'both'):
if attr in self.sa:
if mode == 'existing':
return
elif mode == 'raise':
raise RuntimeError, \
"Attribute %r already known to %s" % (attr, self.fa)
ids = np.array(
['%s-%i' % (thisid, i) for i in xrange(self.samples.shape[1])])
if self.fa.has_key(attr):
self.fa[attr].value = ids
else:
self.fa[attr] = ids
def __copy__(self):
return self.copy(deep=False)
def __deepcopy__(self, memo=None):
return self.copy(deep=True, memo=memo)
def __reduce__(self):
return (self.__class__, (self.samples, dict(self.sa), dict(self.fa),
dict(self.a)))
def copy(self, deep=True, sa=None, fa=None, a=None, memo=None):
"""Create a copy of a dataset.
By default this is going to return a deep copy of the dataset, hence no
data would be shared between the original dataset and its copy.
Parameters
----------
deep : boolean, optional
If False, a shallow copy of the dataset is return instead. The copy
contains only views of the samples, sample attributes and feature
attributes, as well as shallow copies of all dataset
attributes.
sa : list or None
List of attributes in the sample attributes collection to include in
the copy of the dataset. If `None` all attributes are considered. If
an empty list is given, all attributes are stripped from the copy.
fa : list or None
List of attributes in the feature attributes collection to include in
the copy of the dataset. If `None` all attributes are considered If
an empty list is given, all attributes are stripped from the copy.
a : list or None
List of attributes in the dataset attributes collection to include in
the copy of the dataset. If `None` all attributes are considered If
an empty list is given, all attributes are stripped from the copy.
memo : dict
Developers only: This argument is only useful if copy() is called
inside the __deepcopy__() method and refers to the dict-argument
`memo` in the Python documentation.
"""
if __debug__:
debug('DS_',
"Duplicating samples shaped %s" % str(self.samples.shape))
if deep:
samples = copy.deepcopy(self.samples, memo)
else:
samples = self.samples.view()
if __debug__:
debug('DS_', "Create new dataset instance for copy")
# call the generic init
out = self.__class__(samples,
sa=self.sa.copy(a=sa, deep=deep, memo=memo),
fa=self.fa.copy(a=fa, deep=deep, memo=memo),
a=self.a.copy(a=a, deep=deep, memo=memo))
if __debug__:
debug(
'DS_', "Return dataset copy %s of source %s" %
(_strid(out), _strid(self)))
return out
def append(self, other):
"""Append the content of a Dataset.
Parameters
----------
other : AttrDataset
The content of this dataset will be append.
Notes
-----
No dataset attributes, or feature attributes will be merged! These
respective properties of the *other* dataset are neither checked for
compatibility nor copied over to this dataset. However, all samples
attributes will be concatenated with the existing ones.
"""
if not self.nfeatures == other.nfeatures:
raise DatasetError("Cannot merge datasets, because the number of "
"features does not match.")
if not sorted(self.sa.keys()) == sorted(other.sa.keys()):
raise DatasetError("Cannot merge dataset. This datasets samples "
"attributes %s cannot be mapped into the other "
"set %s" % (self.sa.keys(), other.sa.keys()))
# concat the samples as well
self.samples = np.concatenate((self.samples, other.samples), axis=0)
# tell the collection the new desired length of all attributes
self.sa.set_length_check(len(self.samples))
# concat all samples attributes
for k, v in other.sa.iteritems():
self.sa[k].value = np.concatenate((self.sa[k].value, v.value),
axis=0)
def __getitem__(self, args):
"""
"""
# uniformize for checks below; it is not a tuple if just single slicing
# spec is passed
if not isinstance(args, tuple):
args = (args, )
if len(args) > 2:
raise ValueError(
"Too many arguments (%i). At most there can be "
"two arguments, one for samples selection and one "
"for features selection" % len(args))
# simplify things below and always have samples and feature slicing
if len(args) == 1:
args = [args[0], slice(None)]
else:
args = [a for a in args]
samples = None
# get the intended subset of the samples array
#
# need to deal with some special cases to ensure proper behavior
#
# ints need to become lists to prevent silent dimensionality changes
# of the arrays when slicing
for i, a in enumerate(args):
if isinstance(a, int):
args[i] = [a]
# for simultaneous slicing of numpy arrays we should
# distinguish the case when one of the args is a slice, so no
# ix_ is needed
if __debug__:
debug('DS_',
"Selecting feature/samples of %s" % str(self.samples.shape))
if isinstance(self.samples, np.ndarray):
if np.any([isinstance(a, slice) for a in args]):
samples = self.samples[args[0], args[1]]
else:
# works even with bool masks (although without
# assurance/checking if mask is of actual length as
# needed, so would work with bogus shorter
# masks). TODO check in __debug__? or may be just do
# enforcing of proper dimensions and order manually?
samples = self.samples[np.ix_(*args)]
else:
# in all other cases we have to do the selection sequentially
#
# samples subset: only alter if subset is requested
samples = self.samples[args[0]]
# features subset
if not args[1] is slice(None):
samples = samples[:, args[1]]
if __debug__:
debug('DS_',
"Selected feature/samples %s" % str(self.samples.shape))
# and now for the attributes -- we want to maintain the type of the
# collections
sa = self.sa.__class__(length=samples.shape[0])
fa = self.fa.__class__(length=samples.shape[1])
a = self.a.__class__()
# per-sample attributes; always needs to run even if slice(None), since
# we need fresh SamplesAttributes even if they share the data
for attr in self.sa.values():
# preserve attribute type
newattr = attr.__class__(doc=attr.__doc__)
# slice
newattr.value = attr.value[args[0]]
# assign to target collection
sa[attr.name] = newattr
# per-feature attributes; always needs to run even if slice(None),
# since we need fresh SamplesAttributes even if they share the data
for attr in self.fa.values():
# preserve attribute type
newattr = attr.__class__(doc=attr.__doc__)
# slice
newattr.value = attr.value[args[1]]
# assign to target collection
fa[attr.name] = newattr
# and finally dataset attributes: this time copying
for attr in self.a.values():
# preserve attribute type
newattr = attr.__class__(name=attr.name, doc=attr.__doc__)
# do a shallow copy here
# XXX every DatasetAttribute should have meaningful __copy__ if
# necessary -- most likely all mappers need to have one
newattr.value = copy.copy(attr.value)
# assign to target collection
a[attr.name] = newattr
# and after a long way instantiate the new dataset of the same type
return self.__class__(samples, sa=sa, fa=fa, a=a)
def __repr_full__(self):
return "%s(%s, sa=%s, fa=%s, a=%s)" \
% (self.__class__.__name__,
repr(self.samples),
repr(self.sa),
repr(self.fa),
repr(self.a))
def __str__(self):
samplesstr = 'x'.join(["%s" % x for x in self.shape])
samplesstr += '@%s' % self.samples.dtype
cols = [
str(col).replace(col.__class__.__name__, label)
for col, label in [(self.sa, 'sa'), (self.fa, 'fa'), (self.a, 'a')]
if len(col)
]
# include only collections that have content
return _str(self, samplesstr, *cols)
__repr__ = {'full': __repr_full__, 'str': __str__}[__REPR_STYLE__]
def __array__(self, *args):
"""Provide an 'array' view or copy over dataset.samples
Parameters
----------
dtype: type, optional
If provided, passed to .samples.__array__() call
*args to mimique numpy.ndarray.__array__ behavior which relies
on the actual number of arguments
"""
# another possibility would be converting .todense() for sparse data
# but that might easily kill the machine ;-)
if not hasattr(self.samples, '__array__'):
raise RuntimeError(
"This AttrDataset instance cannot be used like a Numpy array "
"since its data-container does not provide an '__array__' "
"methods. Container type is %s." % type(self.samples))
return self.samples.__array__(*args)
def __len__(self):
return self.shape[0]
@classmethod
def from_hdf5(cls, source, name=None):
"""Load a Dataset from HDF5 file
Parameters
----------
source : string or h5py.highlevel.File
Filename or HDF5's File to load dataset from
name : string, optional
If file contains multiple entries at the 1st level, if
provided, `name` specifies the group to be loaded as the
AttrDataset.
Returns
-------
AttrDataset
Raises
------
ValueError
"""
if not externals.exists('h5py'):
raise RuntimeError(
"Missing 'h5py' package -- saving is not possible.")
import h5py
from mvpa2.base.hdf5 import hdf2obj
# look if we got an hdf file instance already
if isinstance(source, h5py.highlevel.File):
own_file = False
hdf = source
else:
own_file = True
hdf = h5py.File(source, 'r')
if not name is None:
# some HDF5 subset is requested
if not name in hdf:
raise ValueError("Cannot find '%s' group in HDF file %s. "
"File contains groups: %s" %
(name, source, hdf.keys()))
# access the group that should contain the dataset
dsgrp = hdf[name]
res = hdf2obj(dsgrp)
if not isinstance(res, AttrDataset):
# TODO: unittest before committing
raise ValueError, "%r in %s contains %s not a dataset. " \
"File contains groups: %s." \
% (name, source, type(res), hdf.keys())
else:
# just consider the whole file
res = hdf2obj(hdf)
if not isinstance(res, AttrDataset):
# TODO: unittest before committing
raise ValueError, "Failed to load a dataset from %s. " \
"Loaded %s instead." \
% (source, type(res))
if own_file:
hdf.close()
return res
# shortcut properties
nsamples = property(fget=len)
nfeatures = property(fget=lambda self: self.shape[1])
shape = property(fget=lambda self: self.samples.shape)
def from_niml(dset, fa_labels=[], sa_labels=[], a_labels=[]):
'''Convert a NIML dataset to a Dataset
Parameters
----------
dset: dict
Dictionary with NIML key-value pairs, such as obtained from
mvpa2.support.nibabel.afni_niml_dset.read()
fa_labels: list
Keys in dset that are enforced to be feature attributes
sa_labels: list
Keys in dset that are enforced to be sample attributes
a_labels: list
Keys in dset that are enforced to be dataset attributes
Returns
-------
dataset: mvpa2.base.Dataset
a PyMVPA Dataset
'''
# check for singleton element
if type(dset) is list and len(dset) == 1:
# recursive call
return from_niml(dset[0])
if not type(dset) is dict:
raise ValueError("Expected a dict")
if not 'data' in dset:
raise ValueError("dset with no data?")
data = dset['data']
if len(data.shape) == 1:
nfeatures = data.shape[0]
nsamples = 1
else:
nfeatures, nsamples = data.shape
# some labels have predefined destinations
sa_labels_ = ['labels', 'stats', 'chunks', 'targets'] + sa_labels
fa_labels_ = ['node_indices', 'center_ids'] + fa_labels
a_labels_ = ['history'] + a_labels
ignore_labels = ('data', 'dset_type')
sa = SampleAttributesCollection(length=nsamples)
fa = FeatureAttributesCollection(length=nfeatures)
a = DatasetAttributesCollection()
labels_collections = [(sa_labels_, sa),
(fa_labels_, fa),
(a_labels_, a)]
infix2collection = {'sa': sa,
'fa': fa,
'a': a}
infix2length = {'sa': nsamples, 'fa': nfeatures}
for k, v in dset.iteritems():
if k in ignore_labels:
continue
if k.startswith(_PYMVPA_PREFIX + _PYMVPA_SEP):
# special PYVMPA field - do the proper conversion
k_split = k.split(_PYMVPA_SEP)
if len(k_split) > 2:
infix = k_split[1].lower()
collection = infix2collection.get(infix, None)
if not collection is None:
short_k = _PYMVPA_SEP.join(k_split[2:])
expected_length = infix2length.get(infix, None)
if expected_length:
if isinstance(v, np.ndarray) and np.dtype == np.str_:
v = str(v)
while isinstance(v, basestring):
# strings are seperated by ';'
# XXX what if this is part of the value
# intended by the user?
v = v.split(';')
if expected_length != len(v):
raise ValueError("Unexpected length: %d != %d" %
(expected_length, len(v)))
v = ArrayCollectable(v, length=expected_length)
collection[short_k] = v
continue
found_label = False
for label, collection in labels_collections:
if k in label:
collection[k] = v
found_label = True
break
if found_label:
continue
# try to be smart and deduce this from dimensions.
# this only works if nfeatures!=nsamples otherwise it would be
# ambiguous
# XXX is this ugly?
if nfeatures != nsamples:
try:
n = len(v)
if n == nfeatures:
fa[k] = v
continue
elif n == nsamples:
sa[k] = v
continue
except:
pass
# don't know what this is - make it a general attribute
a[k] = v
ds = Dataset(np.transpose(data), sa=sa, fa=fa, a=a)
return ds
iplv = mat['iPLV']
ds_list = []
runs = []
for i in range(iplv.shape[-1]):
ref = iplv[0, i]
data = mat[ref][()]
ds_list.append(data)
run = [i+1 for _ in range(data.shape[0])]
runs.append(run)
ds_ = np.vstack(ds_list)
sa = SampleAttributesCollection({
'targets': np.hstack(runs),
'chunks': np.hstack(runs),
'runs': np.hstack(runs),
'subject': np.ones(ds_.shape[0]),
'file': ["Subj=1_connectivity_individualalpha.mat" for _ in range(ds_.shape[0])]
})
fa = FeatureAttributesCollection({'matrix_values':np.ones(ds_.shape[1])})
a = DatasetAttributesCollection({'data_path':'/media/robbis/DATA/meg/hcp/',
'experiment':'hcp',
})
ds = Dataset(ds_, sa=sa, a=a, fa=fa)
mat.close()
nan_mask = np.logical_not(np.isnan(ds.samples))
keep_idx = np.bool_(np.sum(nan_mask, axis=1))
def lean_errorfx(ds):#Node):
#def __call__(self, ds):
assert_collections_equal(ds.sa, target_sa)
# since equal, we could just replace with a blank one
ds.sa = SampleAttributesCollection()
return ds
class AttrDataset(object):
"""Generic storage class for datasets with multiple attributes.
A dataset consists of four pieces. The core is a two-dimensional
array that has variables (so-called `features`) in its columns and
the associated observations (so-called `samples`) in the rows. In
addition a dataset may have any number of attributes for features
and samples. Unsurprisingly, these are called 'feature attributes'
and 'sample attributes'. Each attribute is a vector of any datatype
that contains a value per each item (feature or sample). Both types
of attributes are organized in their respective collections --
accessible via the `sa` (sample attribute) and `fa` (feature
attribute) attributes. Finally, a dataset itself may have any number
of additional attributes (i.e. a mapper) that are stored in their
own collection that is accessible via the `a` attribute (see
examples below).
Attributes
----------
sa : Collection
Access to all sample attributes, where each attribute is a named
vector (1d-array) of an arbitrary datatype, with as many elements
as rows in the `samples` array of the dataset.
fa : Collection
Access to all feature attributes, where each attribute is a named
vector (1d-array) of an arbitrary datatype, with as many elements
as columns in the `samples` array of the dataset.
a : Collection
Access to all dataset attributes, where each attribute is a named
element of an arbitrary datatype.
Notes
-----
Any dataset might have a mapper attached that is stored as a dataset
attribute called `mapper`.
Examples
--------
The simplest way to create a dataset is from a 2D array.
>>> import numpy as np
>>> from mvpa2.datasets import *
>>> samples = np.arange(12).reshape((4,3))
>>> ds = AttrDataset(samples)
>>> ds.nsamples
4
>>> ds.nfeatures
3
>>> ds.samples
array([[ 0, 1, 2],
[ 3, 4, 5],
[ 6, 7, 8],
[ 9, 10, 11]])
The above dataset can only be used for unsupervised machine-learning
algorithms, since it doesn't have any targets associated with its
samples. However, creating a labeled dataset is equally simple.
>>> ds_labeled = dataset_wizard(samples, targets=range(4))
Both the labeled and the unlabeled dataset share the same samples
array. No copying is performed.
>>> ds.samples is ds_labeled.samples
True
If the data should not be shared the samples array has to be copied
beforehand.
The targets are available from the samples attributes collection, but
also via the convenience property `targets`.
>>> ds_labeled.sa.targets is ds_labeled.targets
True
If desired, it is possible to add an arbitrary amount of additional
attributes. Regardless if their original sequence type they will be
converted into an array.
>>> ds_labeled.sa['lovesme'] = [0,0,1,0]
>>> ds_labeled.sa.lovesme
array([0, 0, 1, 0])
An alternative method to create datasets with arbitrary attributes
is to provide the attribute collections to the constructor itself --
which would also test for an appropriate size of the given
attributes:
>>> fancyds = AttrDataset(samples, sa={'targets': range(4),
... 'lovesme': [0,0,1,0]})
>>> fancyds.sa.lovesme
array([0, 0, 1, 0])
Exactly the same logic applies to feature attributes as well.
Datasets can be sliced (selecting a subset of samples and/or
features) similar to arrays. Selection is possible using boolean
selection masks, index sequences or slicing arguments. The following
calls for samples selection all result in the same dataset:
>>> sel1 = ds[np.array([False, True, True])]
>>> sel2 = ds[[1,2]]
>>> sel3 = ds[1:3]
>>> np.all(sel1.samples == sel2.samples)
True
>>> np.all(sel2.samples == sel3.samples)
True
During selection data is only copied if necessary. If the slicing
syntax is used the resulting dataset will share the samples with the
original dataset.
>>> sel1.samples.base is ds.samples.base
False
>>> sel2.samples.base is ds.samples.base
False
>>> sel3.samples.base is ds.samples.base
True
For feature selection the syntax is very similar they are just
represented on the second axis of the samples array. Plain feature
selection is achieved be keeping all samples and select a subset of
features (all syntax variants for samples selection are also
supported for feature selection).
>>> fsel = ds[:, 1:3]
>>> fsel.samples
array([[ 1, 2],
[ 4, 5],
[ 7, 8],
[10, 11]])
It is also possible to simultaneously selection a subset of samples
*and* features. Using the slicing syntax now copying will be
performed.
>>> fsel = ds[:3, 1:3]
>>> fsel.samples
array([[1, 2],
[4, 5],
[7, 8]])
>>> fsel.samples.base is ds.samples.base
True
Please note that simultaneous selection of samples and features is
*not* always congruent to array slicing.
>>> ds[[0,1,2], [1,2]].samples
array([[1, 2],
[4, 5],
[7, 8]])
Whereas the call: 'ds.samples[[0,1,2], [1,2]]' would not be
possible. In `AttrDatasets` selection of samples and features is always
applied individually and independently to each axis.
"""
def __init__(self, samples, sa=None, fa=None, a=None):
"""
A Dataset might have an arbitrary number of attributes for samples,
features, or the dataset as a whole. However, only the data samples
themselves are required.
Parameters
----------
samples : ndarray
Data samples. This has to be a two-dimensional (samples x features)
array. If the samples are not in that format, please consider one of
the `AttrDataset.from_*` classmethods.
sa : SampleAttributesCollection
Samples attributes collection.
fa : FeatureAttributesCollection
Features attributes collection.
a : DatasetAttributesCollection
Dataset attributes collection.
"""
# conversions
if isinstance(samples, list):
samples = np.array(samples)
# Check all conditions we need to have for `samples` dtypes
if not hasattr(samples, 'dtype'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`dtype` attribute that behaves similar to the one of an "
"array-like.")
if not hasattr(samples, 'shape'):
raise ValueError(
"AttrDataset only supports dtypes as samples that have a "
"`shape` attribute that behaves similar to the one of an "
"array-like.")
if not len(samples.shape):
raise ValueError("Only `samples` with at least one axis are "
"supported (got: %i)" % len(samples.shape))
# handling of 1D-samples
# i.e. 1D is treated as multiple samples with a single feature
if len(samples.shape) == 1:
samples = np.atleast_2d(samples).T
# that's all -- accepted
self.samples = samples
# Everything in a dataset (except for samples) is organized in
# collections
# Number of samples is .shape[0] for sparse matrix support
self.sa = SampleAttributesCollection(length=len(self))
if not sa is None:
self.sa.update(sa)
self.fa = FeatureAttributesCollection(length=self.nfeatures)
if not fa is None:
self.fa.update(fa)
self.a = DatasetAttributesCollection()
if not a is None:
self.a.update(a)
def init_origids(self, which, attr='origids', mode='new'):
"""Initialize the dataset's 'origids' attribute.
The purpose of origids is that they allow to track the identity of
a feature or a sample through the lifetime of a dataset (i.e. subsequent
feature selections).
Calling this method will overwrite any potentially existing IDs (of the
XXX)
Parameters
----------
which : {'features', 'samples', 'both'}
An attribute is generated for each feature, sample, or both that
represents a unique ID. This ID incorporates the dataset instance ID
and should allow merging multiple datasets without causing multiple
identical ID and the resulting dataset.
attr : str
Name of the attribute to store the generated IDs in. By convention
this should be 'origids' (the default), but might be changed for
specific purposes.
mode : {'existing', 'new', 'raise'}, optional
Action if `attr` is already present in the collection.
Default behavior is 'new' whenever new ids are generated and
replace existing values if such are present. With 'existing' it would
not alter existing content. With 'raise' it would raise
`RuntimeError`.
Raises
------
`RuntimeError`
If `mode` == 'raise' and `attr` is already defined
"""
# now do evil to ensure unique ids across multiple datasets
# so that they could be merged together
thisid = str(id(self))
legal_modes = ('raise', 'existing', 'new')
if not mode in legal_modes:
raise ValueError, "Incorrect mode %r. Known are %s." % \
(mode, legal_modes)
if which in ('samples', 'both'):
if attr in self.sa:
if mode == 'existing':
return
elif mode == 'raise':
raise RuntimeError, \
"Attribute %r already known to %s" % (attr, self.sa)
ids = np.array(['%s-%i' % (thisid, i)
for i in xrange(self.samples.shape[0])])
if self.sa.has_key(attr):
self.sa[attr].value = ids
else:
self.sa[attr] = ids
if which in ('features', 'both'):
if attr in self.sa:
if mode == 'existing':
return
elif mode == 'raise':
raise RuntimeError, \
"Attribute %r already known to %s" % (attr, self.fa)
ids = np.array(['%s-%i' % (thisid, i)
for i in xrange(self.samples.shape[1])])
if self.fa.has_key(attr):
self.fa[attr].value = ids
else:
self.fa[attr] = ids
def __copy__(self):
return self.copy(deep=False)
def __deepcopy__(self, memo=None):
return self.copy(deep=True, memo=memo)
def __reduce__(self):
return (self.__class__,
(self.samples,
dict(self.sa),
dict(self.fa),
dict(self.a)))
def copy(self, deep=True, sa=None, fa=None, a=None, memo=None):
"""Create a copy of a dataset.
By default this is going to return a deep copy of the dataset, hence no
data would be shared between the original dataset and its copy.
Parameters
----------
deep : boolean, optional
If False, a shallow copy of the dataset is return instead. The copy
contains only views of the samples, sample attributes and feature
attributes, as well as shallow copies of all dataset
attributes.
sa : list or None
List of attributes in the sample attributes collection to include in
the copy of the dataset. If `None` all attributes are considered. If
an empty list is given, all attributes are stripped from the copy.
fa : list or None
List of attributes in the feature attributes collection to include in
the copy of the dataset. If `None` all attributes are considered If
an empty list is given, all attributes are stripped from the copy.
a : list or None
List of attributes in the dataset attributes collection to include in
the copy of the dataset. If `None` all attributes are considered If
an empty list is given, all attributes are stripped from the copy.
memo : dict
Developers only: This argument is only useful if copy() is called
inside the __deepcopy__() method and refers to the dict-argument
`memo` in the Python documentation.
"""
if __debug__:
debug('DS_', "Duplicating samples shaped %s"
% str(self.samples.shape))
if deep:
samples = copy.deepcopy(self.samples, memo)
else:
samples = self.samples.view()
if __debug__:
debug('DS_', "Create new dataset instance for copy")
# call the generic init
out = self.__class__(samples,
sa=self.sa.copy(a=sa, deep=deep, memo=memo),
fa=self.fa.copy(a=fa, deep=deep, memo=memo),
a=self.a.copy(a=a, deep=deep, memo=memo))
if __debug__:
debug('DS_', "Return dataset copy %s of source %s"
% (_strid(out), _strid(self)))
return out
def append(self, other):
"""This method should not be used and will be removed in the future"""
warning("AttrDataset.append() is deprecated and will be removed. "
"Instead of ds.append(x) use: ds = vstack((ds, x), a=0)")
if not self.nfeatures == other.nfeatures:
raise DatasetError("Cannot merge datasets, because the number of "
"features does not match.")
if not sorted(self.sa.keys()) == sorted(other.sa.keys()):
raise DatasetError("Cannot merge dataset. This datasets samples "
"attributes %s cannot be mapped into the other "
"set %s" % (self.sa.keys(), other.sa.keys()))
# concat the samples as well
self.samples = np.concatenate((self.samples, other.samples), axis=0)
# tell the collection the new desired length of all attributes
self.sa.set_length_check(len(self.samples))
# concat all samples attributes
for k, v in other.sa.iteritems():
self.sa[k].value = np.concatenate((self.sa[k].value, v.value),
axis=0)