def handle_update_intent(self, message):
identity = IdentityManager().get()
if not identity.owner:
self.speak_dialog("not.paired")
else:
ConfigurationManager.load_remote()
self.speak_dialog("config.updated")
def main():
global ws
global loop
ws = WebsocketClient()
tts.init(ws)
ConfigurationManager.init(ws)
loop = RecognizerLoop()
loop.on('recognizer_loop:utterance', handle_utterance)
loop.on('recognizer_loop:record_begin', handle_record_begin)
loop.on('recognizer_loop:wakeword', handle_wakeword)
loop.on('recognizer_loop:record_end', handle_record_end)
loop.on('speak', handle_speak)
ws.on('open', handle_open)
ws.on('speak', handle_speak)
ws.on('multi_utterance_intent_failure',
handle_multi_utterance_intent_failure)
ws.on('recognizer_loop:sleep', handle_sleep)
ws.on('recognizer_loop:wake_up', handle_wake_up)
ws.on('mycroft.stop', handle_stop)
ws.on("mycroft.paired", handle_paired)
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
try:
loop.run()
except KeyboardInterrupt, e:
logger.exception(e)
event_thread.exit()
sys.exit()
def main():
global ws
global loop
ws = WebsocketClient()
tts.init(ws)
ConfigurationManager.init(ws)
loop = RecognizerLoop()
loop.on('recognizer_loop:utterance', handle_utterance)
loop.on('recognizer_loop:record_begin', handle_record_begin)
loop.on('recognizer_loop:wakeword', handle_wakeword)
loop.on('recognizer_loop:record_end', handle_record_end)
loop.on('speak', handle_speak)
ws.on('open', handle_open)
ws.on('speak', handle_speak)
ws.on(
'multi_utterance_intent_failure',
handle_multi_utterance_intent_failure)
ws.on('recognizer_loop:sleep', handle_sleep)
ws.on('recognizer_loop:wake_up', handle_wake_up)
ws.on('mycroft.stop', handle_stop)
ws.on("mycroft.paired", handle_paired)
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
try:
loop.run()
except KeyboardInterrupt, e:
logger.exception(e)
event_thread.exit()
sys.exit()
def main():
global ws
global loop
global config
lock = PIDLock("voice")
ws = WebsocketClient()
config = ConfigurationManager.get()
ConfigurationManager.init(ws)
loop = RecognizerLoop()
loop.on('recognizer_loop:utterance', handle_utterance)
loop.on('speak', handle_speak)
loop.on('recognizer_loop:record_begin', handle_record_begin)
loop.on('recognizer_loop:wakeword', handle_wakeword)
loop.on('recognizer_loop:record_end', handle_record_end)
loop.on('recognizer_loop:no_internet', handle_no_internet)
ws.on('open', handle_open)
ws.on('complete_intent_failure', handle_complete_intent_failure)
ws.on('recognizer_loop:sleep', handle_sleep)
ws.on('recognizer_loop:wake_up', handle_wake_up)
ws.on('mycroft.mic.mute', handle_mic_mute)
ws.on('mycroft.mic.unmute', handle_mic_unmute)
ws.on("mycroft.paired", handle_paired)
ws.on('recognizer_loop:audio_output_start', handle_audio_start)
ws.on('recognizer_loop:audio_output_end', handle_audio_end)
ws.on('mycroft.stop', handle_stop)
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
try:
loop.run()
except KeyboardInterrupt, e:
LOG.exception(e)
sys.exit()
def main():
global ws
lock = Lock('skills') # prevent multiple instances of this service
# Connect this Skill management process to the websocket
ws = WebsocketClient()
ConfigurationManager.init(ws)
ignore_logs = ConfigurationManager.instance().get("ignore_logs")
# Listen for messages and echo them for logging
def _echo(message):
try:
_message = json.loads(message)
if _message.get("type") in ignore_logs:
return
if _message.get("type") == "registration":
# do not log tokens from registration messages
_message["data"]["token"] = None
message = json.dumps(_message)
except:
pass
LOG('SKILLS').debug(message)
ws.on('message', _echo)
ws.on('skill.converse.request', handle_converse_request)
# Startup will be called after websocket is full live
ws.once('open', _starting_up)
ws.run_forever()
def main():
global ws
global config
ws = WebsocketClient()
ConfigurationManager.init(ws)
config = ConfigurationManager.get()
speech.init(ws)
# Setup control of pulse audio
setup_pulseaudio_handlers(config.get('Audio').get('pulseaudio'))
def echo(message):
try:
_message = json.loads(message)
if 'mycroft.audio.service' not in _message.get('type'):
return
message = json.dumps(_message)
except:
pass
LOG.debug(message)
LOG.info("Staring Audio Services")
ws.on('message', echo)
ws.once('open', load_services_callback)
try:
ws.run_forever()
except KeyboardInterrupt, e:
LOG.exception(e)
speech.shutdown()
sys.exit()
def connect(self, event=None):
if event and event.metadata:
ssid = event.metadata.get("ssid")
connected = self.is_connected(ssid)
if connected:
LOG.warn("Mycroft is already connected to %s" % ssid)
else:
self.disconnect()
LOG.info("Connecting to: %s" % ssid)
nid = wpa(self.iface, 'add_network')
wpa(self.iface, 'set_network', nid, 'ssid', '"' + ssid + '"')
if event.metadata.__contains__("pass"):
psk = '"' + event.metadata.get("pass") + '"'
wpa(self.iface, 'set_network', nid, 'psk', psk)
else:
wpa(self.iface, 'set_network', nid, 'key_mgmt', 'NONE')
wpa(self.iface, 'enable', nid)
connected = self.get_connected(ssid)
if connected:
wpa(self.iface, 'save_config')
ConfigurationManager.set(self.NAME, 'setup', False, True)
self.client.emit(
Message("mycroft.wifi.connected", {'connected': connected}))
LOG.info("Connection status for %s = %s" % (ssid, connected))
def setup(self):
must_upload = self.config.get('must_upload')
if must_upload is not None and str2bool(must_upload):
ConfigurationManager.set('enclosure', 'must_upload', False)
time.sleep(5)
self.client.emit(
Message("speak",
metadata={
'utterance':
"I am currently uploading to the arduino."
}))
self.client.emit(
Message("speak",
metadata={
'utterance': "I will be finished in just a moment."
}))
self.upload_hex()
self.client.emit(
Message("speak",
metadata={'utterance':
"Arduino programing complete."}))
must_start_test = self.config.get('must_start_test')
if must_start_test is not None and str2bool(must_start_test):
ConfigurationManager.set('enclosure', 'must_start_test', False)
time.sleep(0.5) # Ensure arduino has booted
self.client.emit(
Message("speak",
metadata={'utterance':
"Begining hardware self test."}))
self.writer.write("test.begin")
def __init__(self, path):
self.path = path
config = ConfigurationManager().get()
config_server = config.get("server")
self.url = config_server.get("url")
self.version = config_server.get("version")
self.identity = IdentityManager.get()
def __init__(self):
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.instance().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
# Send a message to the Arduino across the serial line asking
# for a reply with version info.
self.writer.write("system.version")
# When the Arduino responds, it will generate this message
self.ws.on("enclosure.started", self.on_arduino_responded)
self.arduino_responded = False
# initiates the web sockets on display manager
# NOTE: this is a temporary place to initiate display manager sockets
initiate_display_manager_ws()
# Start a 5 second timer. If the serial port hasn't received
# any acknowledgement of the "system.version" within those
# 5 seconds, assume there is nothing on the other end (e.g.
# we aren't running a Mark 1 with an Arduino)
Timer(5, self.check_for_response).start()
# Notifications from mycroft-core
self.ws.on("enclosure.notify.no_internet", self.on_no_internet)
def main():
global ws
lock = Lock('skills') # prevent multiple instances of this service
# Connect this Skill management process to the websocket
ws = WebsocketClient()
ConfigurationManager.init(ws)
ignore_logs = ConfigurationManager.instance().get("ignore_logs")
# Listen for messages and echo them for logging
def _echo(message):
try:
_message = json.loads(message)
if _message.get("type") in ignore_logs:
return
if _message.get("type") == "registration":
# do not log tokens from registration messages
_message["data"]["token"] = None
message = json.dumps(_message)
except:
pass
logger.debug(message)
ws.on('message', _echo)
# Kick off loading of skills
ws.once('open', _load_skills)
ws.run_forever()
def main():
global ws
global loop
global config
lock = PIDLock("voice")
ws = WebsocketClient()
config = ConfigurationManager.get()
ConfigurationManager.init(ws)
loop = RecognizerLoop()
loop.on('recognizer_loop:utterance', handle_utterance)
loop.on('speak', handle_speak)
loop.on('recognizer_loop:record_begin', handle_record_begin)
loop.on('recognizer_loop:wakeword', handle_wakeword)
loop.on('recognizer_loop:record_end', handle_record_end)
loop.on('recognizer_loop:no_internet', handle_no_internet)
ws.on('open', handle_open)
ws.on('complete_intent_failure', handle_complete_intent_failure)
ws.on('recognizer_loop:sleep', handle_sleep)
ws.on('recognizer_loop:wake_up', handle_wake_up)
ws.on('mycroft.mic.mute', handle_mic_mute)
ws.on('mycroft.mic.unmute', handle_mic_unmute)
ws.on("mycroft.paired", handle_paired)
ws.on('recognizer_loop:audio_output_start', handle_audio_start)
ws.on('recognizer_loop:audio_output_end', handle_audio_end)
ws.on('mycroft.stop', handle_stop)
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
try:
loop.run()
except KeyboardInterrupt, e:
logger.exception(e)
sys.exit()
def handle_update_intent(self, message):
identity = IdentityManager().get()
if not identity.owner:
self.speak_dialog("not.paired")
else:
ConfigurationManager.load_remote()
self.speak_dialog("config.updated")
def __init__(self, path):
self.path = path
config = ConfigurationManager().get()
config_server = config.get("server")
self.url = config_server.get("url")
self.version = config_server.get("version")
self.identity = IdentityManager.get()
def main():
global ws
global config
ws = WebsocketClient()
ConfigurationManager.init(ws)
config = ConfigurationManager.get()
speech.init(ws)
# Setup control of pulse audio
setup_pulseaudio_handlers(config.get('Audio').get('pulseaudio'))
def echo(message):
try:
_message = json.loads(message)
if 'mycroft.audio.service' not in _message.get('type'):
return
message = json.dumps(_message)
except:
pass
LOG.debug(message)
LOG.info("Staring Audio Services")
ws.on('message', echo)
ws.once('open', load_services_callback)
try:
ws.run_forever()
except KeyboardInterrupt, e:
LOG.exception(e)
speech.shutdown()
sys.exit()
def __init__(self):
super(PlatformPatchSkill, self).__init__(name="PlatformPatchSkill")
self.platform_type = ConfigurationManager.instance().get(
"enclosure").get("platform")
self.platform_build = ConfigurationManager.instance().get(
"enclosure").get("platform_build")
self.timer = None
def main():
global ws
global config
global pulse
ws = WebsocketClient()
ConfigurationManager.init(ws)
config = ConfigurationManager.get()
speech.init(ws)
# Setup control of pulse audio
if pulsectl and config.get('Audio').get('pulseaudio') == 'mute':
pulse = pulsectl.Pulse('Mycroft-audio-service')
else:
pulse = None
def echo(message):
try:
_message = json.loads(message)
if 'mycroft.audio.service' in _message.get('type'):
return
message = json.dumps(_message)
except:
pass
logger.debug(message)
logger.info("Staring Audio Services")
ws.on('message', echo)
ws.once('open', load_services_callback)
try:
ws.run_forever()
except KeyboardInterrupt, e:
logger.exception(e)
speech.shutdown()
sys.exit()
def main():
global ws
lock = Lock('skills') # prevent multiple instances of this service
# Connect this Skill management process to the websocket
ws = WebsocketClient()
ConfigurationManager.init(ws)
ignore_logs = ConfigurationManager.instance().get("ignore_logs")
# Listen for messages and echo them for logging
def _echo(message):
try:
_message = json.loads(message)
if _message.get("type") in ignore_logs:
return
if _message.get("type") == "registration":
# do not log tokens from registration messages
_message["data"]["token"] = None
message = json.dumps(_message)
except:
pass
logger.debug(message)
ws.on('message', _echo)
# Startup will be called after websocket is full live
ws.once('open', _starting_up)
ws.run_forever()
def run_patch(self, filename):
# In brief, the patch:
# - Replaces the crontab (run hourly instead of once a day)
# - Updates the GPG key for the Mycroft repo
# - Bumps the platform_build to '9'
self.log.info("Attempting platform patch...")
self.cmd('bash ' + filename)
ConfigurationManager.load_local()
self.platform_build = 9
def __init__(self, emitter, config=None):
self.emitter = emitter
if config is None:
config = ConfigurationManager.get()
ConfigurationManager.init(self.emitter)
config = config.get("wav_client", {"path": "/tmp/mycroft_in.wav"})
self.config = config
self.file_consumer = FileConsumer(file_location=self.config["path"],
emitter=self.emitter)
def update(self):
if self.config.get("update"):
try:
self.speak("Upgrading enclosure version")
subprocess.check_call("/opt/enclosure/upload.sh")
self.speak("Enclosure update completed")
ConfigurationManager.save({"enclosure": {"update": False}})
except:
self.speak("I cannot upgrade right now, I'll try later")
def __init__(self):
self.iface = pyw.winterfaces()[0]
self.ap = AccessPoint(self.iface)
self.server = None
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.enclosure = EnclosureAPI(self.ws)
self.init_events()
self.conn_monitor = None
self.conn_monitor_stop = threading.Event()
def __init__(self, key_phrase="hey mycroft", config=None, lang="en-us"):
self.lang = str(lang).lower()
self.key_phrase = str(key_phrase).lower()
# rough estimate 1 phoneme per 2 chars
self.num_phonemes = len(key_phrase) / 2 + 1
if config is None:
config = ConfigurationManager.get().get("hot_words", {})
config = config.get(self.key_phrase, {})
self.config = config
self.listener_config = ConfigurationManager.get().get("listener", {})
def __init__(self):
self.iface = pyw.winterfaces()[0]
self.ap = AccessPoint(self.iface)
self.server = None
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.enclosure = EnclosureAPI(self.ws)
self.init_events()
self.conn_monitor = None
self.conn_monitor_stop = threading.Event()
def __init__(self):
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.get().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
self.writer.write("system.version")
self.ws.on("enclosure.start", self.start)
self.started = False
Timer(5, self.stop).start() # WHY? This at least needs an explaination, this is non-obvious behavior
def __init__(self):
resetSelf = False
try:
self.config = ConfigurationManager.get().get("enclosure")
platform = self.config.get('platform')
if platform is None:
# Use the serial port to check if this is a Mycroft
# Mark 1 unit.
platform = self.detect_platform()
if platform == 'unknown':
# Since this is a semi-permanent detection, be
# certain! Sometimes noise on the serial line
# causes a faulty mis-detection on a real
# Mycroft Mark 1
platform = self.detect_platform()
ConfigurationManager.set('enclosure', 'platform', platform)
# After a platform detection, the system is usually
# already active, so the message from the loop
# has already gone by on the messagebus. So self reset.
resetSelf = True
except Exception as e:
self.disconnect()
raise Exception("Exception: Unable to determine platform\n" +
str(e))
LOGGER.info("Platform = '" + platform + "'")
if platform == "mycroft_mark_1":
# We are a mycroft_mark_1 unit, start up the
# enclosure client to communicate over the
# serial port
self.__init_serial()
else:
self.disconnect()
raise Exception("Exception: Not a Mycroft Mark 1, shutting down")
self.client = WebsocketClient()
self.reader = EnclosureReader(self.serial, self.client)
self.writer = EnclosureWriter(self.serial, self.client)
# Create helpers to handle the various parts of the enclosure
self.eyes = EnclosureEyes(self.client, self.writer)
self.mouth = EnclosureMouth(self.client, self.writer)
self.system = EnclosureArduino(self.client, self.writer)
# TODO: Remove EnclosureWeather once the Skill can send images
# directly to the EnclosureAPI.
self.weather = EnclosureWeather(self.client, self.writer)
self.__register_events()
if resetSelf:
self.__handle_reset(None)
def setup(self):
must_upload = self.config.get('must_upload')
if must_upload is not None and str2bool(must_upload):
ConfigurationManager.set('enclosure', 'must_upload', False)
self.upload_hex()
must_start_test = self.config.get('must_start_test')
if must_start_test is not None and str2bool(must_start_test):
ConfigurationManager.set('enclosure', 'must_start_test', False)
time.sleep(0.5) # Ensure arduino has booted
self.writer.write("test.begin")
def __init__(self):
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.get().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
self.writer.write("system.version")
self.ws.on("enclosure.start", self.start)
self.started = False
Timer(5, self.stop).start() # WHY? This at least
def __init__(self):
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.get().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
self.writer.write("system.version")
self.ws.on("enclosure.start", self.start)
self.started = False
Timer(5, self.reconnect).start(
) # WHY? This at least needs an explaination, this is non-obvious behavior
def main():
global skill_response, wait_response, port, lang
wait_response = True
skill_response = ""
global ws
ws = WebsocketClient()
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
ws.on('speak', handle_speak)
import tornado.options
tornado.options.parse_command_line()
config = ConfigurationManager.get().get("websocket")
lang = ConfigurationManager.get().get("lang")
port = "9090"
url = ("http://" + str(ip) + ":" + str(port))
print("*********************************************************")
print("* JCASOFT - Mycroft Web Cliento ")
print("*")
print("* Access from web browser " + url)
print("*********************************************************")
routes = [
tornado.web.url(r"/", MainHandler, name="main"),
tornado.web.url(r"/static/(.*)", tornado.web.StaticFileHandler,
{'path': './'}),
tornado.web.url(r"/ws", WebSocketHandler)
]
settings = {
"debug": True,
"template_path": os.path.join(os.path.dirname(__file__), "templates"),
"static_path": os.path.join(os.path.dirname(__file__), "static"),
}
application = tornado.web.Application(routes, **settings)
httpServer = tornado.httpserver.HTTPServer(application)
tornado.options.parse_command_line()
httpServer.listen(port)
try:
tornado.ioloop.IOLoop.instance().start()
except KeyboardInterrupt:
logger.exception(e)
event_thread.exit()
tornado.ioloop.IOLoop.instance().stop()
sys.exit()
def __init__(self):
self.ws = WebsocketClient()
self.ws.on("open", self.on_ws_open)
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.instance().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
# initiates the web sockets on display manager
# NOTE: this is a temporary place to initiate display manager sockets
initiate_display_manager_ws()
def __init__(self):
self.ws = WebsocketClient()
self.ws.on("open", self.on_ws_open)
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.instance().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
# initiates the web sockets on display manager
# NOTE: this is a temporary place to initiate display manager sockets
initiate_display_manager_ws()
def main():
global skill_response, wait_response, port, lang
wait_response = True
skill_response = ""
global ws
ws = WebsocketClient()
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
ws.on('speak', handle_speak)
import tornado.options
tornado.options.parse_command_line()
config = ConfigurationManager.get().get("websocket")
lang = ConfigurationManager.get().get("lang")
host = config.get("host")
port = config.get("port")
route = config.get("route")
validate_param(host, "websocket.host")
validate_param(port, "websocket.port")
validate_param(route, "websocket.route")
url = "http://" + str(ip)+":"+str(port)
print "*********************************************************"
print "* Access from web browser " + url
print "*********************************************************"
routes = [
(route, WebsocketEventHandler),
tornado.web.url(r"/", MainHandler, name="main"),
tornado.web.url(r"/static/(.*)", tornado.web.StaticFileHandler, {'path': './'}),
tornado.web.url(r"/ws", WebSocketHandler)
]
settings = {
"debug": True,
"template_path": os.path.join(os.path.dirname(__file__), "templates"),
"static_path": os.path.join(os.path.dirname(__file__), "static"),
}
application = tornado.web.Application(routes, **settings)
httpServer = tornado.httpserver.HTTPServer(application)
tornado.options.parse_command_line()
httpServer.listen(port)
tornado.ioloop.IOLoop.instance().start()
def __init_client(self, params):
config = ConfigurationManager.get().get("websocket")
if not params.host:
params.host = config.get('host')
if not params.port:
params.port = config.get('port')
self.ws = WebsocketClient(host=params.host,
port=params.port,
ssl=params.use_ssl)
# Connect configuration manager to message bus to receive updates
ConfigurationManager.init(self.ws)
def __init_client(self, params):
config = ConfigurationManager.get().get("websocket")
if not params.host:
params.host = config.get('host')
if not params.port:
params.port = config.get('port')
self.ws = WebsocketClient(host=params.host,
port=params.port,
ssl=params.use_ssl)
# Connect configuration manager to message bus to receive updates
ConfigurationManager.init(self.ws)
def __init__(self, args):
params = self.__build_params(args)
if params.config:
ConfigurationManager.load_local([params.config])
if exists(params.lib) and isdir(params.lib):
sys.path.append(params.lib)
sys.path.append(params.dir)
self.dir = params.dir
self.enable_intent = params.enable_intent
self.__init_client(params)
def __init__(self, args):
params = self.__build_params(args)
if params.config:
ConfigurationManager.load_local([params.config])
if exists(params.lib) and isdir(params.lib):
sys.path.append(params.lib)
sys.path.append(params.dir)
self.dir = params.dir
self.enable_intent = params.enable_intent
self.__init_client(params)
def __init__(self):
config_core = ConfigurationManager.get()
self.lang = str(self.init_language(config_core))
config_stt = config_core.get("stt", {})
self.config = config_stt.get(config_stt.get("module"), {})
self.credential = self.config.get("credential", {})
self.recognizer = Recognizer()
def create():
"""
Factory method to create a TTS engine based on configuration.
The configuration file ``mycroft.conf`` contains a ``tts`` section with
the name of a TTS module to be read by this method.
"tts": {
"module": <engine_name>
}
"""
from mycroft.tts.remote_tts import RemoteTTS
config = ConfigurationManager.get().get('tts', {})
module = config.get('module', 'mimic')
lang = config.get(module).get('lang')
voice = config.get(module).get('voice')
clazz = TTSFactory.CLASSES.get(module)
if issubclass(clazz, RemoteTTS):
url = config.get(module).get('url')
tts = clazz(lang, voice, url)
else:
tts = clazz(lang, voice)
tts.validator.validate()
return tts
def __init__(self, emitter):
FallbackSkill.__init__(self)
self.config = ConfigurationManager.get()['padatious']
intent_cache = expanduser(self.config['intent_cache'])
try:
from padatious import IntentContainer
except ImportError:
LOG.error('Padatious not installed. Please re-run dev_setup.sh')
try:
call(['notify-send', 'Padatious not installed',
'Please run build_host_setup and dev_setup again'])
except OSError:
pass
return
ver = get_distribution('padatious').version
if ver != PADATIOUS_VERSION:
LOG.warning('Using Padatious v' + ver + '. Please re-run ' +
'dev_setup.sh to install ' + PADATIOUS_VERSION)
self.container = IntentContainer(intent_cache)
self.emitter = emitter
self.emitter.on('padatious:register_intent', self.register_intent)
self.emitter.on('padatious:register_entity', self.register_entity)
self.register_fallback(self.handle_fallback, 5)
self.finished_training_event = Event()
self.train_delay = self.config['train_delay']
self.train_time = get_time() + self.train_delay
self.wait_and_train()
def __init__(self, directory, name):
super(SkillSettings, self).__init__()
# when skills try to instantiate settings
# in __init__, it can erase the settings saved
# on disk (settings.json). So this prevents that
# This is set to true in core.py after skill init
self.allow_overwrite = False
self.api = DeviceApi()
self.config = ConfigurationManager.get()
self.name = name
self.directory = directory
# set file paths
self._settings_path = join(directory, 'settings.json')
self._meta_path = join(directory, 'settingsmeta.json')
self.is_alive = True
self.loaded_hash = hash(str(self))
self._complete_intialization = False
self._device_identity = None
self._api_path = None
self._user_identity = None
self.changed_callback = None
# if settingsmeta exist
if isfile(self._meta_path):
self._poll_skill_settings()
def get(phrase, lang=None, context=None):
"""
Looks up a resource file for the given phrase. If no file
is found, the requested phrase is returned as the string.
This will use the default language for translations.
Args:
phrase (str): resource phrase to retrieve/translate
lang (str): the language to use
context (dict): values to be inserted into the string
Returns:
str: a randomized and/or translated version of the phrase
"""
if not lang:
from mycroft.configuration import ConfigurationManager
lang = ConfigurationManager.instance().get("lang")
filename = "text/"+lang.lower()+"/"+phrase+".dialog"
template = resolve_resource_file(filename)
if not template:
logger.debug("Resource file not found: " + filename)
return phrase
stache = MustacheDialogRenderer()
stache.load_template_file("template", template)
if not context:
context = {}
return stache.render("template", context)
def __init__(self, wake_word_recognizer):
self.config = ConfigurationManager.instance()
listener_config = self.config.get('listener')
self.upload_config = listener_config.get('wake_word_upload')
self.wake_word_name = listener_config['wake_word']
# The maximum audio in seconds to keep for transcribing a phrase
# The wake word must fit in this time
num_phonemes = wake_word_recognizer.num_phonemes
len_phoneme = listener_config.get('phoneme_duration', 120) / 1000.0
self.TEST_WW_SEC = int(num_phonemes * len_phoneme)
self.SAVED_WW_SEC = (10 if self.upload_config['enable']
else self.TEST_WW_SEC)
speech_recognition.Recognizer.__init__(self)
self.wake_word_recognizer = wake_word_recognizer
self.audio = pyaudio.PyAudio()
self.multiplier = listener_config.get('multiplier')
self.energy_ratio = listener_config.get('energy_ratio')
# check the config for the flag to save wake words.
self.save_utterances = listener_config.get('record_utterances', False)
self.save_wake_words = listener_config.get('record_wake_words') \
or self.upload_config['enable'] or self.config['opt_in']
self.upload_lock = Lock()
self.save_wake_words_dir = join(gettempdir(), 'mycroft_wake_words')
self.filenames_to_upload = []
self.mic_level_file = os.path.join(get_ipc_directory(), "mic_level")
self._stop_signaled = False
def __init__(self, wake_word_recognizer, hot_word_engines=None):
if hot_word_engines is None:
hot_word_engines = {}
self.config = ConfigurationManager.instance()
listener_config = self.config.get('listener')
self.upload_config = listener_config.get('wake_word_upload')
self.wake_word_name = listener_config['wake_word']
# The maximum audio in seconds to keep for transcribing a phrase
# The wake word must fit in this time
num_phonemes = wake_word_recognizer.num_phonemes
len_phoneme = listener_config.get('phoneme_duration', 120) / 1000.0
self.TEST_WW_SEC = int(num_phonemes * len_phoneme)
self.SAVED_WW_SEC = (10 if self.upload_config['enable'] else
self.TEST_WW_SEC)
speech_recognition.Recognizer.__init__(self)
self.wake_word_recognizer = wake_word_recognizer
self.audio = pyaudio.PyAudio()
self.multiplier = listener_config.get('multiplier')
self.energy_ratio = listener_config.get('energy_ratio')
# check the config for the flag to save wake words.
self.save_utterances = listener_config.get('record_utterances', False)
self.save_wake_words = listener_config.get('record_wake_words', False) \
or self.upload_config['enable'] or self.config['opt_in']
self.upload_lock = Lock()
self.save_wake_words_dir = join(gettempdir(), 'mycroft_wake_words')
self.filenames_to_upload = []
self.mic_level_file = os.path.join(get_ipc_directory(), "mic_level")
self._stop_signaled = False
self.hot_word_engines = hot_word_engines
def main():
import tornado.options
lock = Lock("service")
tornado.options.parse_command_line()
def reload_hook():
""" Hook to release lock when autoreload is triggered. """
lock.delete()
autoreload.add_reload_hook(reload_hook)
config = ConfigurationManager.get().get("websocket")
host = config.get("host")
port = config.get("port")
route = config.get("route")
validate_param(host, "websocket.host")
validate_param(port, "websocket.port")
validate_param(route, "websocket.route")
routes = [
(route, WebsocketEventHandler)
]
application = web.Application(routes, **settings)
application.listen(port, host)
ioloop.IOLoop.instance().start()
def __init__(self, directory, name):
super(SkillSettings, self).__init__()
# when skills try to instantiate settings
# in __init__, it can erase the settings saved
# on disk (settings.json). So this prevents that
# This is set to true in core.py after skill init
self.allow_overwrite = False
self.api = DeviceApi()
self.config = ConfigurationManager.get()
self.name = name
self.directory = directory
# set file paths
self._settings_path = join(directory, 'settings.json')
self._meta_path = join(directory, 'settingsmeta.json')
self.is_alive = True
self.loaded_hash = hash(str(self))
self._complete_intialization = False
self._device_identity = None
self._api_path = None
self._user_identity = None
self.changed_callback = None
# if settingsmeta exist
if isfile(self._meta_path):
self._poll_skill_settings()
def __init__(self, emitter):
FallbackSkill.__init__(self)
self.config = ConfigurationManager.get()['padatious']
intent_cache = expanduser(self.config['intent_cache'])
try:
from padatious import IntentContainer
except ImportError:
LOG.error('Padatious not installed. Please re-run dev_setup.sh')
try:
call([
'notify-send', 'Padatious not installed',
'Please run build_host_setup and dev_setup again'
])
except OSError:
pass
return
ver = get_distribution('padatious').version
if ver != PADATIOUS_VERSION:
LOG.warning('Using Padatious v' + ver + '. Please re-run ' +
'dev_setup.sh to install ' + PADATIOUS_VERSION)
self.container = IntentContainer(intent_cache)
self.emitter = emitter
self.emitter.on('padatious:register_intent', self.register_intent)
self.emitter.on('padatious:register_entity', self.register_entity)
self.register_fallback(self.handle_fallback, 5)
self.finished_training_event = Event()
self.train_delay = self.config['train_delay']
self.train_time = get_time() + self.train_delay
self.wait_and_train()
def create():
"""
Factory method to create a TTS engine based on configuration.
The configuration file ``mycroft.conf`` contains a ``tts`` section with
the name of a TTS module to be read by this method.
"tts": {
"module": <engine_name>
}
"""
from mycroft.tts.remote_tts import RemoteTTS
config = ConfigurationManager.get().get('tts', {})
module = config.get('module', 'mimic')
lang = config.get(module).get('lang')
voice = config.get(module).get('voice')
clazz = TTSFactory.CLASSES.get(module)
if issubclass(clazz, RemoteTTS):
url = config.get(module).get('url')
tts = clazz(lang, voice, url)
else:
tts = clazz(lang, voice)
tts.validator.validate()
return tts
def setup(self):
must_upload = self.config.get('must_upload')
if must_upload is not None and str2bool(must_upload):
ConfigurationManager.set('enclosure', 'must_upload', False)
time.sleep(5)
self.client.emit(Message("speak", metadata={
'utterance': "I am currently uploading to the arduino."}))
self.client.emit(Message("speak", metadata={
'utterance': "I will be finished in just a moment."}))
self.upload_hex()
must_start_test = self.config.get('must_start_test')
if must_start_test is not None and str2bool(must_start_test):
ConfigurationManager.set('enclosure', 'must_start_test', False)
time.sleep(0.5) # Ensure arduino has booted
self.writer.write("test.begin")
def __init__(self):
config_core = ConfigurationManager.get()
self.lang = str(self.init_language(config_core))
config_stt = config_core.get("stt", {})
self.config = config_stt.get(config_stt.get("module"), {})
self.credential = self.config.get("credential", {})
self.recognizer = Recognizer()
def create_hotword(hotword="hey mycroft", config=None, lang="en-us"):
LOG.info("creating " + hotword)
if not config:
config = ConfigurationManager.get().get("hotwords", {})
module = config.get(hotword).get("module", "pocketsphinx")
config = config.get(hotword, {"module": module})
clazz = HotWordFactory.CLASSES.get(module)
return clazz(hotword, config, lang=lang)
def __init__(self, name, emitter=None):
self.name = name
self.bind(emitter)
self.config_core = ConfigurationManager.get()
self.config = self.config_core.get(name)
self.dialog_renderer = None
self.file_system = FileSystemAccess(join('skills', name))
self.registered_intents = []
self.log = getLogger(name)
def init(websocket):
"""
Start speach related handlers
"""
global ws
global tts
global tts_hash
global config
ws = websocket
ConfigurationManager.init(ws)
config = ConfigurationManager.get()
ws.on('mycroft.stop', handle_stop)
ws.on('mycroft.audio.speech.stop', handle_stop)
ws.on('speak', handle_speak)
tts = TTSFactory.create()
tts.init(ws)
tts_hash = config.get('tts')
def main():
global ws
ws = WebsocketClient()
ConfigurationManager.init(ws)
def echo(message):
try:
_message = json.loads(message)
if _message.get("type") == "registration":
# do not log tokens from registration messages
_message["data"]["token"] = None
message = json.dumps(_message)
except:
pass
logger.debug(message)
ws.on('message', echo)
ws.once('open', load_skills_callback)
ws.run_forever()
def __init_client(self, params):
config = ConfigurationManager.get().get("websocket")
if not params.host:
params.host = config.get('host')
if not params.port:
params.port = config.get('port')
self.ws = WebsocketClient(host=params.host,
port=params.port,
ssl=params.use_ssl)
def main():
global ws
global loop
global config
global tts
global tts_hash
lock = PIDLock("voice")
ws = WebsocketClient()
config = ConfigurationManager.get()
tts = TTSFactory.create()
tts.init(ws)
tts_hash = config.get('tts')
ConfigurationManager.init(ws)
loop = RecognizerLoop()
loop.on('recognizer_loop:utterance', handle_utterance)
loop.on('recognizer_loop:record_begin', handle_record_begin)
loop.on('recognizer_loop:wakeword', handle_wakeword)
loop.on('recognizer_loop:record_end', handle_record_end)
loop.on('speak', handle_speak)
loop.on('recognizer_loop:no_internet', handle_no_internet)
ws.on('open', handle_open)
ws.on('speak', handle_speak)
ws.on(
'multi_utterance_intent_failure',
handle_multi_utterance_intent_failure)
ws.on('recognizer_loop:sleep', handle_sleep)
ws.on('recognizer_loop:wake_up', handle_wake_up)
ws.on('mycroft.mic.mute', handle_mic_mute)
ws.on('mycroft.mic.unmute', handle_mic_unmute)
ws.on('mycroft.stop', handle_stop)
ws.on("mycroft.paired", handle_paired)
event_thread = Thread(target=connect)
event_thread.setDaemon(True)
event_thread.start()
try:
loop.run()
except KeyboardInterrupt, e:
logger.exception(e)
event_thread.exit()
sys.exit()
def handle_speak(event):
"""
Handle "speak" message
"""
config = ConfigurationManager.get()
ConfigurationManager.init(ws)
global _last_stop_signal
# Mild abuse of the signal system to allow other processes to detect
# when TTS is happening. See mycroft.util.is_speaking()
utterance = event.data['utterance']
if event.data.get('expect_response', False):
ws.once('recognizer_loop:audio_output_end', _trigger_expect_response)
# This is a bit of a hack for Picroft. The analog audio on a Pi blocks
# for 30 seconds fairly often, so we don't want to break on periods
# (decreasing the chance of encountering the block). But we will
# keep the split for non-Picroft installs since it give user feedback
# faster on longer phrases.
#
# TODO: Remove or make an option? This is really a hack, anyway,
# so we likely will want to get rid of this when not running on Mimic
if not config.get('enclosure', {}).get('platform') == "picroft":
start = time.time()
chunks = re.split(r'(?<!\w\.\w.)(?<![A-Z][a-z]\.)(?<=\.|\?)\s',
utterance)
for chunk in chunks:
try:
mute_and_speak(chunk)
except KeyboardInterrupt:
raise
except:
LOG.error('Error in mute_and_speak', exc_info=True)
if _last_stop_signal > start or check_for_signal('buttonPress'):
break
else:
mute_and_speak(utterance)
def __init_serial(self):
try:
self.config = ConfigurationManager.get().get("enclosure")
self.port = self.config.get("port")
self.rate = int(self.config.get("rate"))
self.timeout = int(self.config.get("timeout"))
self.serial = serial.serial_for_url(
url=self.port, baudrate=self.rate, timeout=self.timeout)
LOGGER.info(
"Connected to: " + self.port + " rate: " + str(self.rate) +
" timeout: " + str(self.timeout))
except:
LOGGER.error(
"It is not possible to connect to serial port: " + self.port)
raise
def __init__(self):
self.ws = WebsocketClient()
ConfigurationManager.init(self.ws)
self.config = ConfigurationManager.instance().get("enclosure")
self.__init_serial()
self.reader = EnclosureReader(self.serial, self.ws)
self.writer = EnclosureWriter(self.serial, self.ws)
# Send a message to the Arduino across the serial line asking
# for a reply with version info.
self.writer.write("system.version")
# When the Arduino responds, it will generate this message
self.ws.on("enclosure.started", self.on_arduino_responded)
self.arduino_responded = False
# Start a 5 second timer. If the serial port hasn't received
# any acknowledgement of the "system.version" within those
# 5 seconds, assume there is nothing on the other end (e.g.
# we aren't running a Mark 1 with an Arduino)
Timer(5, self.check_for_response).start()
# Notifications from mycroft-core
self.ws.on("enclosure.notify.no_internet", self.on_no_internet)
