def _connect_fired(self):
try:
connection = SerialManager(device=self.serial_device,
baudrate=self.baudrate,
sleep_after_connect=self.sleep_after_connect,
timeout=self.timeout)
connection.open()
print ArduinoApi(connection=connection).millis()
except Exception as e:
traceback.print_exc()
message(traceback.format_exc(), buttons=['OK'])
return
a = self.tree = ArduinoTree(connection=connection)
d = a.define.as_dict
s = [GuiDefine(name=k, value=str(v)) for k, v in d.items()]
s.sort(key=lambda x: x.name)
self.defines = s
self.digital_pins = [PinWrapper(pin=a.pin.get(x))
for x in a.pin.names_digital]
self.analog_pins = [PinWrapper(pin=a.pin.get(x))
for x in a.pin.names_analog]
self.pins = self.digital_pins + self.analog_pins
fw = a.firmware_info
self.arduino_version = fw.get('arduino_version')
self.firmware_build_time = str(fw.get('compile_datetime'))
self.avr_name = fw.get('avr_name')
self.gcc_version = fw.get('gcc_version')
self.libc_version = fw.get('libc_version')
self.libc_date = str(fw.get('libc_date'))
self.connected = True
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
print connection.device
a = ArduinoTree(connection=connection)
master = I2C_Master(a.wire)
master.send(0x27, [0b00001000])
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
print(connection.device)
a = ArduinoTree(connection=connection)
master = I2C_Master(a.wire)
print(['0x%02x' % x for x in master.scan()])
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
print(connection.device)
a = ArduinoTree(connection=connection)
master = I2C_Master(a.wire)
master.send(I2C_ADDRESS, [0b00001000])
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
print (connection.device)
a = ArduinoTree(connection=connection)
master = I2C_Master(a.wire)
print (['0x%02x' % x for x in master.scan()])
def checkspeed(n):
connection = SerialManager(device='/dev/ttyACM0')
connection.open()
a = ArduinoTree(connection=connection)
print('performance test for ArduinoTree()')
print('n=%s' % n)
print('')
measure(a, n, 'api.digitalRead(0)')
measure(a, n, 'api.digitalWrite(0,0)')
measure(a, n, 'api.analogRead(0)')
measure(a, n, 'api.analogWrite(0,0)')
measure(a, n, 'api.pinMode(0,0)')
measure(a, n, 'api.millis()')
measure(a, n, 'api.shiftOut(0, 1, 0, 15)')
measure(a, n, 'api.pulseIn(0, 0)')
print('')
print('performance test for AD9850()')
print('')
ad9850 = AD9850([0, 1, 2, 3])
measure(ad9850, n, 'setup()', root='ad9850')
measure(ad9850, n, 'write_frequency(400)', root='ad9850')
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
a = ArduinoTree(connection=connection)
bmp = Bmp180(a.wire)
p, t = bmp.read()
print 'pressure: %s kPa' % (p / 1000)
print 'temperature: %s C' % t
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
a = ArduinoTree(connection=connection)
bmp = Bmp180(a.wire)
p, t = bmp.read()
print('pressure: %s kPa' % (p / 1000))
print('temperature: %s C' % t)
def main():
connection = SerialManager(sleep_after_connect=2)
connection.open()
a = ArduinoTree(connection=connection)
bme = BME280(a.wire)
t, h, p = bme.read()
print('pressure: %d kPa' % (p / 1000))
print('temperature: %d C' % t)
print('humidity: %d %' % h)
def checkspeed(n):
connection = SerialManager()
connection.open()
a = ArduinoTree(connection=connection)
print ('performance test for ArduinoTree()')
print ('n=%s' % n)
print('')
measure(a, n, 'api.digitalRead(0)')
measure(a, n, 'api.digitalWrite(0,0)')
measure(a, n, 'api.analogRead(0)')
measure(a, n, 'api.analogWrite(0,0)')
measure(a, n, 'api.pinMode(0,0)')
measure(a, n, 'api.millis()')
measure(a, n, 'api.shiftOut(0, 1, 0, 15)')
a.define.get('__TIME__') # init cache
measure(a, n, 'define.get("__TIME__")')
a.register.get('DDRB') # init cache
measure(a, n, 'register.get("DDRB").read_value()')
measure(a, n, 'register.get("DDRB").address')
measure(a, n, 'register.get("DDRB").size')
a.vcc.read() # init cache
measure(a, n, 'vcc.read()')
measure(a, n, 'pin.get(0).read_digital_value()')
measure(a, n, 'pin.get(0).read_mode()')
a.eeprom.size # init cache
measure(a, n, 'eeprom.size')
measure(a, n, 'eeprom.read(0)')
print('')
print ('performance test for AD9850()')
print('')
ad9850 = AD9850([0, 1, 2, 3])
measure(ad9850, n, 'setup()', root='ad9850')
measure(ad9850, n, 'write_frequency(400)', root='ad9850')
def checkspeed(n):
connection = SerialManager()
connection.open()
a = ArduinoTree(connection=connection)
print('performance test for ArduinoTree()')
print('n=%s' % n)
print('')
measure(a, n, 'api.digitalRead(0)')
measure(a, n, 'api.digitalWrite(0,0)')
measure(a, n, 'api.analogRead(0)')
measure(a, n, 'api.analogWrite(0,0)')
measure(a, n, 'api.pinMode(0,0)')
measure(a, n, 'api.millis()')
measure(a, n, 'api.shiftOut(0, 1, 0, 15)')
a.define.get('__TIME__') # init cache
measure(a, n, 'define.get("__TIME__")')
a.register.get('DDRB') # init cache
measure(a, n, 'register.get("DDRB").read_value()')
measure(a, n, 'register.get("DDRB").address')
measure(a, n, 'register.get("DDRB").size')
a.vcc.read() # init cache
measure(a, n, 'vcc.read()')
measure(a, n, 'pin.get(0).read_digital_value()')
measure(a, n, 'pin.get(0).read_mode()')
a.eeprom.size # init cache
measure(a, n, 'eeprom.size')
measure(a, n, 'eeprom.read(0)')
print('')
print('performance test for AD9850()')
print('')
ad9850 = AD9850([0, 1, 2, 3])
measure(ad9850, n, 'setup()', root='ad9850')
measure(ad9850, n, 'write_frequency(400)', root='ad9850')
def main():
print('PCF8574 demo')
print('address: 0x%X' % I2C_ADDRESS)
connection = SerialManager(sleep_after_connect=2)
connection.open()
a = ArduinoTree(connection=connection)
pcf = PCF8574(a.wire, I2C_ADDRESS)
def write(d):
print('write: %s' % bin(d))
pcf.write8(d)
def read():
d = pcf.read8()
print('read: %s' % bin(d))
read()
d = pcf.readPin(0)
print('read pin 0: %s' % d)
print('write pin 0: %s' % 1)
pcf.writePin(0, 1)
d = pcf.readPin(0)
print('read pin 0: %s' % d)
read()
write(0b11111111)
read()
write(0b10101010)
read()
write(0b01010101)
read()
write(0b00000000)
read()
#!/usr/bin/env python
"""Tests the TMP007 sensor"""
import time
import logging
from nanpy import TMP007
from nanpy.serialmanager import SerialManager
logging.basicConfig(level=logging.INFO)
logger = logging.getLogger("TMP007")
connection = SerialManager(sleep_after_connect=2)
connection.open()
sensor = TMP007(connection=connection)
try:
while True:
object_temp = sensor.get_object_temperature()
die_temp = sensor.get_die_temperature()
logger.info("Object temperature: %.2f", object_temp)
logger.info("Die temperature: %.2f", die_temp)
time.sleep(4)
except KeyboardInterrupt:
pass
